linux/include/linux/pxa2xx_ssp.h
<<
>>
Prefs
   1/*
   2 *  pxa2xx_ssp.h
   3 *
   4 *  Copyright (C) 2003 Russell King, All Rights Reserved.
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License version 2 as
   8 * published by the Free Software Foundation.
   9 *
  10 * This driver supports the following PXA CPU/SSP ports:-
  11 *
  12 *       PXA250     SSP
  13 *       PXA255     SSP, NSSP
  14 *       PXA26x     SSP, NSSP, ASSP
  15 *       PXA27x     SSP1, SSP2, SSP3
  16 *       PXA3xx     SSP1, SSP2, SSP3, SSP4
  17 */
  18
  19#ifndef __LINUX_SSP_H
  20#define __LINUX_SSP_H
  21
  22#include <linux/list.h>
  23#include <linux/io.h>
  24
  25/*
  26 * SSP Serial Port Registers
  27 * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
  28 * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
  29 */
  30
  31#define SSCR0           (0x00)  /* SSP Control Register 0 */
  32#define SSCR1           (0x04)  /* SSP Control Register 1 */
  33#define SSSR            (0x08)  /* SSP Status Register */
  34#define SSITR           (0x0C)  /* SSP Interrupt Test Register */
  35#define SSDR            (0x10)  /* SSP Data Write/Data Read Register */
  36
  37#define SSTO            (0x28)  /* SSP Time Out Register */
  38#define SSPSP           (0x2C)  /* SSP Programmable Serial Protocol */
  39#define SSTSA           (0x30)  /* SSP Tx Timeslot Active */
  40#define SSRSA           (0x34)  /* SSP Rx Timeslot Active */
  41#define SSTSS           (0x38)  /* SSP Timeslot Status */
  42#define SSACD           (0x3C)  /* SSP Audio Clock Divider */
  43#define SSACDD          (0x40)  /* SSP Audio Clock Dither Divider */
  44
  45/* Common PXA2xx bits first */
  46#define SSCR0_DSS       (0x0000000f)    /* Data Size Select (mask) */
  47#define SSCR0_DataSize(x)  ((x) - 1)    /* Data Size Select [4..16] */
  48#define SSCR0_FRF       (0x00000030)    /* FRame Format (mask) */
  49#define SSCR0_Motorola  (0x0 << 4)      /* Motorola's Serial Peripheral Interface (SPI) */
  50#define SSCR0_TI        (0x1 << 4)      /* Texas Instruments' Synchronous Serial Protocol (SSP) */
  51#define SSCR0_National  (0x2 << 4)      /* National Microwire */
  52#define SSCR0_ECS       (1 << 6)        /* External clock select */
  53#define SSCR0_SSE       (1 << 7)        /* Synchronous Serial Port Enable */
  54#define SSCR0_SCR(x)    ((x) << 8)      /* Serial Clock Rate (mask) */
  55
  56/* PXA27x, PXA3xx */
  57#define SSCR0_EDSS      (1 << 20)       /* Extended data size select */
  58#define SSCR0_NCS       (1 << 21)       /* Network clock select */
  59#define SSCR0_RIM       (1 << 22)       /* Receive FIFO overrrun interrupt mask */
  60#define SSCR0_TUM       (1 << 23)       /* Transmit FIFO underrun interrupt mask */
  61#define SSCR0_FRDC      (0x07000000)    /* Frame rate divider control (mask) */
  62#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)  /* Time slots per frame [1..8] */
  63#define SSCR0_FPCKE     (1 << 29)       /* FIFO packing enable */
  64#define SSCR0_ACS       (1 << 30)       /* Audio clock select */
  65#define SSCR0_MOD       (1 << 31)       /* Mode (normal or network) */
  66
  67
  68#define SSCR1_RIE       (1 << 0)        /* Receive FIFO Interrupt Enable */
  69#define SSCR1_TIE       (1 << 1)        /* Transmit FIFO Interrupt Enable */
  70#define SSCR1_LBM       (1 << 2)        /* Loop-Back Mode */
  71#define SSCR1_SPO       (1 << 3)        /* Motorola SPI SSPSCLK polarity setting */
  72#define SSCR1_SPH       (1 << 4)        /* Motorola SPI SSPSCLK phase setting */
  73#define SSCR1_MWDS      (1 << 5)        /* Microwire Transmit Data Size */
  74
  75#define SSSR_ALT_FRM_MASK       3       /* Masks the SFRM signal number */
  76#define SSSR_TNF        (1 << 2)        /* Transmit FIFO Not Full */
  77#define SSSR_RNE        (1 << 3)        /* Receive FIFO Not Empty */
  78#define SSSR_BSY        (1 << 4)        /* SSP Busy */
  79#define SSSR_TFS        (1 << 5)        /* Transmit FIFO Service Request */
  80#define SSSR_RFS        (1 << 6)        /* Receive FIFO Service Request */
  81#define SSSR_ROR        (1 << 7)        /* Receive FIFO Overrun */
  82
  83#ifdef CONFIG_ARCH_PXA
  84#define RX_THRESH_DFLT  8
  85#define TX_THRESH_DFLT  8
  86
  87#define SSSR_TFL_MASK   (0xf << 8)      /* Transmit FIFO Level mask */
  88#define SSSR_RFL_MASK   (0xf << 12)     /* Receive FIFO Level mask */
  89
  90#define SSCR1_TFT       (0x000003c0)    /* Transmit FIFO Threshold (mask) */
  91#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
  92#define SSCR1_RFT       (0x00003c00)    /* Receive FIFO Threshold (mask) */
  93#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
  94
  95#else
  96
  97#define RX_THRESH_DFLT  2
  98#define TX_THRESH_DFLT  2
  99
 100#define SSSR_TFL_MASK   (0x3 << 8)      /* Transmit FIFO Level mask */
 101#define SSSR_RFL_MASK   (0x3 << 12)     /* Receive FIFO Level mask */
 102
 103#define SSCR1_TFT       (0x000000c0)    /* Transmit FIFO Threshold (mask) */
 104#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
 105#define SSCR1_RFT       (0x00000c00)    /* Receive FIFO Threshold (mask) */
 106#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
 107#endif
 108
 109/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
 110#define SSCR0_TISSP             (1 << 4)        /* TI Sync Serial Protocol */
 111#define SSCR0_PSP               (3 << 4)        /* PSP - Programmable Serial Protocol */
 112#define SSCR1_TTELP             (1 << 31)       /* TXD Tristate Enable Last Phase */
 113#define SSCR1_TTE               (1 << 30)       /* TXD Tristate Enable */
 114#define SSCR1_EBCEI             (1 << 29)       /* Enable Bit Count Error interrupt */
 115#define SSCR1_SCFR              (1 << 28)       /* Slave Clock free Running */
 116#define SSCR1_ECRA              (1 << 27)       /* Enable Clock Request A */
 117#define SSCR1_ECRB              (1 << 26)       /* Enable Clock request B */
 118#define SSCR1_SCLKDIR           (1 << 25)       /* Serial Bit Rate Clock Direction */
 119#define SSCR1_SFRMDIR           (1 << 24)       /* Frame Direction */
 120#define SSCR1_RWOT              (1 << 23)       /* Receive Without Transmit */
 121#define SSCR1_TRAIL             (1 << 22)       /* Trailing Byte */
 122#define SSCR1_TSRE              (1 << 21)       /* Transmit Service Request Enable */
 123#define SSCR1_RSRE              (1 << 20)       /* Receive Service Request Enable */
 124#define SSCR1_TINTE             (1 << 19)       /* Receiver Time-out Interrupt enable */
 125#define SSCR1_PINTE             (1 << 18)       /* Peripheral Trailing Byte Interrupt Enable */
 126#define SSCR1_IFS               (1 << 16)       /* Invert Frame Signal */
 127#define SSCR1_STRF              (1 << 15)       /* Select FIFO or EFWR */
 128#define SSCR1_EFWR              (1 << 14)       /* Enable FIFO Write/Read */
 129
 130#define SSSR_BCE                (1 << 23)       /* Bit Count Error */
 131#define SSSR_CSS                (1 << 22)       /* Clock Synchronisation Status */
 132#define SSSR_TUR                (1 << 21)       /* Transmit FIFO Under Run */
 133#define SSSR_EOC                (1 << 20)       /* End Of Chain */
 134#define SSSR_TINT               (1 << 19)       /* Receiver Time-out Interrupt */
 135#define SSSR_PINT               (1 << 18)       /* Peripheral Trailing Byte Interrupt */
 136
 137
 138#define SSPSP_SCMODE(x)         ((x) << 0)      /* Serial Bit Rate Clock Mode */
 139#define SSPSP_SFRMP             (1 << 2)        /* Serial Frame Polarity */
 140#define SSPSP_ETDS              (1 << 3)        /* End of Transfer data State */
 141#define SSPSP_STRTDLY(x)        ((x) << 4)      /* Start Delay */
 142#define SSPSP_DMYSTRT(x)        ((x) << 7)      /* Dummy Start */
 143#define SSPSP_SFRMDLY(x)        ((x) << 9)      /* Serial Frame Delay */
 144#define SSPSP_SFRMWDTH(x)       ((x) << 16)     /* Serial Frame Width */
 145#define SSPSP_DMYSTOP(x)        ((x) << 23)     /* Dummy Stop */
 146#define SSPSP_FSRT              (1 << 25)       /* Frame Sync Relative Timing */
 147
 148/* PXA3xx */
 149#define SSPSP_EDMYSTRT(x)       ((x) << 26)     /* Extended Dummy Start */
 150#define SSPSP_EDMYSTOP(x)       ((x) << 28)     /* Extended Dummy Stop */
 151#define SSPSP_TIMING_MASK       (0x7f8001f0)
 152
 153#define SSACD_SCDB              (1 << 3)        /* SSPSYSCLK Divider Bypass */
 154#define SSACD_ACPS(x)           ((x) << 4)      /* Audio clock PLL select */
 155#define SSACD_ACDS(x)           ((x) << 0)      /* Audio clock divider select */
 156#define SSACD_SCDX8             (1 << 7)        /* SYSCLK division ratio select */
 157
 158enum pxa_ssp_type {
 159        SSP_UNDEFINED = 0,
 160        PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
 161        PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
 162        PXA27x_SSP,
 163        PXA3xx_SSP,
 164        PXA168_SSP,
 165        PXA910_SSP,
 166        CE4100_SSP,
 167};
 168
 169struct ssp_device {
 170        struct platform_device *pdev;
 171        struct list_head        node;
 172
 173        struct clk      *clk;
 174        void __iomem    *mmio_base;
 175        unsigned long   phys_base;
 176
 177        const char      *label;
 178        int             port_id;
 179        int             type;
 180        int             use_count;
 181        int             irq;
 182        int             drcmr_rx;
 183        int             drcmr_tx;
 184};
 185
 186/**
 187 * pxa_ssp_write_reg - Write to a SSP register
 188 *
 189 * @dev: SSP device to access
 190 * @reg: Register to write to
 191 * @val: Value to be written.
 192 */
 193static inline void pxa_ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
 194{
 195        __raw_writel(val, dev->mmio_base + reg);
 196}
 197
 198/**
 199 * pxa_ssp_read_reg - Read from a SSP register
 200 *
 201 * @dev: SSP device to access
 202 * @reg: Register to read from
 203 */
 204static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 205{
 206        return __raw_readl(dev->mmio_base + reg);
 207}
 208
 209struct ssp_device *pxa_ssp_request(int port, const char *label);
 210void pxa_ssp_free(struct ssp_device *);
 211#endif
 212
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.