linux/drivers/firewire/Kconfig
<<
>>
Prefs
   1menu "IEEE 1394 (FireWire) support"
   2        depends on PCI || BROKEN
   3        # firewire-core does not depend on PCI but is
   4        # not useful without PCI controller driver
   5
   6config FIREWIRE
   7        tristate "FireWire driver stack"
   8        select CRC_ITU_T
   9        help
  10          This is the new-generation IEEE 1394 (FireWire) driver stack
  11          a.k.a. Juju, a new implementation designed for robustness and
  12          simplicity.
  13          See http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
  14          for information about migration from the older Linux 1394 stack
  15          to the new driver stack.
  16
  17          To compile this driver as a module, say M here: the module will be
  18          called firewire-core.
  19
  20config FIREWIRE_OHCI
  21        tristate "OHCI-1394 controllers"
  22        depends on PCI && FIREWIRE && MMU
  23        help
  24          Enable this driver if you have a FireWire controller based
  25          on the OHCI specification.  For all practical purposes, this
  26          is the only chipset in use, so say Y here.
  27
  28          To compile this driver as a module, say M here:  The module will be
  29          called firewire-ohci.
  30
  31config FIREWIRE_SBP2
  32        tristate "Storage devices (SBP-2 protocol)"
  33        depends on FIREWIRE && SCSI
  34        help
  35          This option enables you to use SBP-2 devices connected to a
  36          FireWire bus.  SBP-2 devices include storage devices like
  37          harddisks and DVD drives, also some other FireWire devices
  38          like scanners.
  39
  40          To compile this driver as a module, say M here:  The module will be
  41          called firewire-sbp2.
  42
  43          You should also enable support for disks, CD-ROMs, etc. in the SCSI
  44          configuration section.
  45
  46config FIREWIRE_NET
  47        tristate "IP networking over 1394"
  48        depends on FIREWIRE && INET
  49        help
  50          This enables IPv4 over IEEE 1394, providing IP connectivity with
  51          other implementations of RFC 2734 as found on several operating
  52          systems.  Multicast support is currently limited.
  53
  54          To compile this driver as a module, say M here:  The module will be
  55          called firewire-net.
  56
  57config FIREWIRE_NOSY
  58        tristate "Nosy - a FireWire traffic sniffer for PCILynx cards"
  59        depends on PCI
  60        help
  61          Nosy is an IEEE 1394 packet sniffer that is used for protocol
  62          analysis and in development of IEEE 1394 drivers, applications,
  63          or firmwares.
  64
  65          This driver lets you use a Texas Instruments PCILynx 1394 to PCI
  66          link layer controller TSB12LV21/A/B as a low-budget bus analyzer.
  67          PCILynx is a nowadays very rare IEEE 1394 controller which is
  68          not OHCI 1394 compliant.
  69
  70          The following cards are known to be based on PCILynx or PCILynx-2:
  71          IOI IOI-1394TT (PCI card), Unibrain Fireboard 400 PCI Lynx-2
  72          (PCI card), Newer Technology FireWire 2 Go (CardBus card),
  73          Apple Power Mac G3 blue & white and G4 with PCI graphics
  74          (onboard controller).
  75
  76          To compile this driver as a module, say M here:  The module will be
  77          called nosy.  Source code of a userspace interface to nosy, called
  78          nosy-dump, can be found in tools/firewire/ of the kernel sources.
  79
  80          If unsure, say N.
  81
  82endmenu
  83
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.