1menu "Generic Driver Options"
   4        string "path to uevent helper"
   5        depends on HOTPLUG
   6        default ""
   7        help
   8          Path to uevent helper program forked by the kernel for
   9          every uevent.
  10          Before the switch to the netlink-based uevent source, this was
  11          used to hook hotplug scripts into kernel device events. It
  12          usually pointed to a shell script at /sbin/hotplug.
  13          This should not be used today, because usual systems create
  14          many events at bootup or device discovery in a very short time
  15          frame. One forked process per event can create so many processes
  16          that it creates a high system load, or on smaller systems
  17          it is known to create out-of-memory situations during bootup.
  19          To disable user space helper program execution at early boot
  20          time specify an empty string here. This setting can be altered
  21          via /proc/sys/kernel/hotplug or via /sys/kernel/uevent_helper
  22          later at runtime.
  24config DEVTMPFS
  25        bool "Maintain a devtmpfs filesystem to mount at /dev"
  26        depends on HOTPLUG
  27        help
  28          This creates a tmpfs/ramfs filesystem instance early at bootup.
  29          In this filesystem, the kernel driver core maintains device
  30          nodes with their default names and permissions for all
  31          registered devices with an assigned major/minor number.
  32          Userspace can modify the filesystem content as needed, add
  33          symlinks, and apply needed permissions.
  34          It provides a fully functional /dev directory, where usually
  35          udev runs on top, managing permissions and adding meaningful
  36          symlinks.
  37          In very limited environments, it may provide a sufficient
  38          functional /dev without any further help. It also allows simple
  39          rescue systems, and reliably handles dynamic major/minor numbers.
  41          Notice: if CONFIG_TMPFS isn't enabled, the simpler ramfs
  42          file system will be used instead.
  45        bool "Automount devtmpfs at /dev, after the kernel mounted the rootfs"
  46        depends on DEVTMPFS
  47        help
  48          This will instruct the kernel to automatically mount the
  49          devtmpfs filesystem at /dev, directly after the kernel has
  50          mounted the root filesystem. The behavior can be overridden
  51          with the commandline parameter: devtmpfs.mount=0|1.
  52          This option does not affect initramfs based booting, here
  53          the devtmpfs filesystem always needs to be mounted manually
  54          after the roots is mounted.
  55          With this option enabled, it allows to bring up a system in
  56          rescue mode with init=/bin/sh, even when the /dev directory
  57          on the rootfs is completely empty.
  59config STANDALONE
  60        bool "Select only drivers that don't need compile-time external firmware" if EXPERIMENTAL
  61        default y
  62        help
  63          Select this option if you don't have magic firmware for drivers that
  64          need it.
  66          If unsure, say Y.
  69        bool "Prevent firmware from being built"
  70        default y
  71        help
  72          Say yes to avoid building firmware. Firmware is usually shipped
  73          with the driver and only when updating the firmware should a
  74          rebuild be made.
  75          If unsure, say Y here.
  77config FW_LOADER
  78        tristate "Userspace firmware loading support" if EXPERT
  79        default y
  80        ---help---
  81          This option is provided for the case where none of the in-tree modules
  82          require userspace firmware loading support, but a module built
  83          out-of-tree does.
  86        bool "Include in-kernel firmware blobs in kernel binary"
  87        depends on FW_LOADER
  88        default y
  89        help
  90          The kernel source tree includes a number of firmware 'blobs'
  91          that are used by various drivers. The recommended way to
  92          use these is to run "make firmware_install", which, after
  93          converting ihex files to binary, copies all of the needed
  94          binary files in firmware/ to /lib/firmware/ on your system so
  95          that they can be loaded by userspace helpers on request.
  97          Enabling this option will build each required firmware blob
  98          into the kernel directly, where request_firmware() will find
  99          them without having to call out to userspace. This may be
 100          useful if your root file system requires a device that uses
 101          such firmware and do not wish to use an initrd.
 103          This single option controls the inclusion of firmware for
 104          every driver that uses request_firmware() and ships its
 105          firmware in the kernel source tree, which avoids a
 106          proliferation of 'Include firmware for xxx device' options.
 108          Say 'N' and let firmware be loaded from userspace.
 111        string "External firmware blobs to build into the kernel binary"
 112        depends on FW_LOADER
 113        help
 114          This option allows firmware to be built into the kernel for the case
 115          where the user either cannot or doesn't want to provide it from
 116          userspace at runtime (for example, when the firmware in question is
 117          required for accessing the boot device, and the user doesn't want to
 118          use an initrd).
 120          This option is a string and takes the (space-separated) names of the
 121          firmware files -- the same names that appear in MODULE_FIRMWARE()
 122          and request_firmware() in the source. These files should exist under
 123          the directory specified by the EXTRA_FIRMWARE_DIR option, which is
 124          by default the firmware subdirectory of the kernel source tree.
 126          For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy
 127          the usb8388.bin file into the firmware directory, and build the kernel.
 128          Then any request_firmware("usb8388.bin") will be satisfied internally
 129          without needing to call out to userspace.
 131          WARNING: If you include additional firmware files into your binary
 132          kernel image that are not available under the terms of the GPL,
 133          then it may be a violation of the GPL to distribute the resulting
 134          image since it combines both GPL and non-GPL work. You should
 135          consult a lawyer of your own before distributing such an image.
 138        string "Firmware blobs root directory"
 139        depends on EXTRA_FIRMWARE != ""
 140        default "firmware"
 141        help
 142          This option controls the directory in which the kernel build system
 143          looks for the firmware files listed in the EXTRA_FIRMWARE option.
 144          The default is firmware/ in the kernel source tree, but by changing
 145          this option you can point it elsewhere, such as /lib/firmware/ or
 146          some other directory containing the firmware files.
 148config DEBUG_DRIVER
 149        bool "Driver Core verbose debug messages"
 150        depends on DEBUG_KERNEL
 151        help
 152          Say Y here if you want the Driver core to produce a bunch of
 153          debug messages to the system log. Select this if you are having a
 154          problem with the driver core and want to see more of what is
 155          going on.
 157          If you are unsure about this, say N here.
 159config DEBUG_DEVRES
 160        bool "Managed device resources verbose debug messages"
 161        depends on DEBUG_KERNEL
 162        help
 163          This option enables kernel parameter devres.log. If set to
 164          non-zero, devres debug messages are printed. Select this if
 165          you are having a problem with devres or want to debug
 166          resource management for a managed device. devres.log can be
 167          switched on and off from sysfs node.
 169          If you are unsure about this, Say N here.
 172        bool
 173        default n
 176        bool
 177        default n
 179config SOC_BUS
 180        bool
 182source "drivers/base/regmap/Kconfig"
 185        bool
 186        default n
 187        select ANON_INODES
 188        depends on EXPERIMENTAL
 189        help
 190          This option enables the framework for buffer-sharing between
 191          multiple drivers. A buffer is associated with a file using driver
 192          APIs extension; the file's descriptor can then be passed on to other
 193          driver.
 195config CMA
 196        bool "Contiguous Memory Allocator (EXPERIMENTAL)"
 198        select MIGRATION
 199        select MEMORY_ISOLATION
 200        help
 201          This enables the Contiguous Memory Allocator which allows drivers
 202          to allocate big physically-contiguous blocks of memory for use with
 203          hardware components that do not support I/O map nor scatter-gather.
 205          For more information see <include/linux/dma-contiguous.h>.
 206          If unsure, say "n".
 208if CMA
 210config CMA_DEBUG
 211        bool "CMA debug messages (DEVELOPMENT)"
 212        depends on DEBUG_KERNEL
 213        help
 214          Turns on debug messages in CMA.  This produces KERN_DEBUG
 215          messages for every CMA call as well as various messages while
 216          processing calls such as dma_alloc_from_contiguous().
 217          This option does not affect warning and error messages.
 219comment "Default contiguous memory area size:"
 221config CMA_SIZE_MBYTES
 222        int "Size in Mega Bytes"
 223        depends on !CMA_SIZE_SEL_PERCENTAGE
 224        default 16
 225        help
 226          Defines the size (in MiB) of the default memory area for Contiguous
 227          Memory Allocator.
 230        int "Percentage of total memory"
 231        depends on !CMA_SIZE_SEL_MBYTES
 232        default 10
 233        help
 234          Defines the size of the default memory area for Contiguous Memory
 235          Allocator as a percentage of the total memory in the system.
 238        prompt "Selected region size"
 239        default CMA_SIZE_SEL_ABSOLUTE
 242        bool "Use mega bytes value only"
 245        bool "Use percentage value only"
 247config CMA_SIZE_SEL_MIN
 248        bool "Use lower value (minimum)"
 250config CMA_SIZE_SEL_MAX
 251        bool "Use higher value (maximum)"
 255config CMA_ALIGNMENT
 256        int "Maximum PAGE_SIZE order of alignment for contiguous buffers"
 257        range 4 9
 258        default 8
 259        help
 260          DMA mapping framework by default aligns all buffers to the smallest
 261          PAGE_SIZE order which is greater than or equal to the requested buffer
 262          size. This works well for buffers up to a few hundreds kilobytes, but
 263          for larger buffers it just a memory waste. With this parameter you can
 264          specify the maximum PAGE_SIZE order for contiguous buffers. Larger
 265          buffers will be aligned only to this specified order. The order is
 266          expressed as a power of two multiplied by the PAGE_SIZE.
 268          For example, if your system defaults to 4KiB pages, the order value
 269          of 8 means that the buffers will be aligned up to 1MiB only.
 271          If unsure, leave the default value "8".
 273config CMA_AREAS
 274        int "Maximum count of the CMA device-private areas"
 275        default 7
 276        help
 277          CMA allows to create CMA areas for particular devices. This parameter
 278          sets the maximum number of such device private CMA areas in the
 279          system.
 281          If unsure, leave the default value "7".
 286 kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.