linux/drivers/ata/Kconfig
<<
>>
Prefs
   1#
   2# SATA/PATA driver configuration
   3#
   4
   5config HAVE_PATA_PLATFORM
   6        bool
   7        help
   8          This is an internal configuration node for any machine that
   9          uses pata-platform driver to enable the relevant driver in the
  10          configuration structure without having to submit endless patches
  11          to update the PATA_PLATFORM entry.
  12
  13menuconfig ATA
  14        tristate "Serial ATA and Parallel ATA drivers"
  15        depends on HAS_IOMEM
  16        depends on BLOCK
  17        depends on !(M32R || M68K) || BROKEN
  18        select SCSI
  19        ---help---
  20          If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21          any other ATA device under Linux, say Y and make sure that you know
  22          the name of your ATA host adapter (the card inside your computer
  23          that "speaks" the ATA protocol, also called ATA controller),
  24          because you will be asked for it.
  25
  26          NOTE: ATA enables basic SCSI support; *however*,
  27          'SCSI disk support', 'SCSI tape support', or
  28          'SCSI CDROM support' may also be needed,
  29          depending on your hardware configuration.
  30
  31if ATA
  32
  33config ATA_NONSTANDARD
  34       bool
  35       default n
  36
  37config ATA_VERBOSE_ERROR
  38        bool "Verbose ATA error reporting"
  39        default y
  40        help
  41          This option adds parsing of ATA command descriptions and error bits
  42          in libata kernel output, making it easier to interpret.
  43          This option will enlarge the kernel by approx. 6KB. Disable it only
  44          if kernel size is more important than ease of debugging.
  45
  46          If unsure, say Y.
  47
  48config ATA_ACPI
  49        bool "ATA ACPI Support"
  50        depends on ACPI && PCI
  51        default y
  52        help
  53          This option adds support for ATA-related ACPI objects.
  54          These ACPI objects add the ability to retrieve taskfiles
  55          from the ACPI BIOS and write them to the disk controller.
  56          These objects may be related to performance, security,
  57          power management, or other areas.
  58          You can disable this at kernel boot time by using the
  59          option libata.noacpi=1
  60
  61config SATA_PMP
  62        bool "SATA Port Multiplier support"
  63        default y
  64        help
  65          This option adds support for SATA Port Multipliers
  66          (the SATA version of an ethernet hub, or SAS expander).
  67
  68comment "Controllers with non-SFF native interface"
  69
  70config SATA_AHCI
  71        tristate "AHCI SATA support"
  72        depends on PCI
  73        help
  74          This option enables support for AHCI Serial ATA.
  75
  76          If unsure, say N.
  77
  78config SATA_AHCI_PLATFORM
  79        tristate "Platform AHCI SATA support"
  80        help
  81          This option enables support for Platform AHCI Serial ATA
  82          controllers.
  83
  84          If unsure, say N.
  85
  86config SATA_FSL
  87        tristate "Freescale 3.0Gbps SATA support"
  88        depends on FSL_SOC
  89        help
  90          This option enables support for Freescale 3.0Gbps SATA controller.
  91          It can be found on MPC837x and MPC8315.
  92
  93          If unsure, say N.
  94
  95config SATA_INIC162X
  96        tristate "Initio 162x SATA support"
  97        depends on PCI
  98        help
  99          This option enables support for Initio 162x Serial ATA.
 100
 101config SATA_ACARD_AHCI
 102        tristate "ACard AHCI variant (ATP 8620)"
 103        depends on PCI
 104        help
 105          This option enables support for Acard.
 106
 107          If unsure, say N.
 108
 109config SATA_SIL24
 110        tristate "Silicon Image 3124/3132 SATA support"
 111        depends on PCI
 112        help
 113          This option enables support for Silicon Image 3124/3132 Serial ATA.
 114
 115          If unsure, say N.
 116
 117config ATA_SFF
 118        bool "ATA SFF support (for legacy IDE and PATA)"
 119        default y
 120        help
 121          This option adds support for ATA controllers with SFF
 122          compliant or similar programming interface.
 123
 124          SFF is the legacy IDE interface that has been around since
 125          the dawn of time.  Almost all PATA controllers have an
 126          SFF interface.  Many SATA controllers have an SFF interface
 127          when configured into a legacy compatibility mode.
 128
 129          For users with exclusively modern controllers like AHCI,
 130          Silicon Image 3124, or Marvell 6440, you may choose to
 131          disable this unneeded SFF support.
 132
 133          If unsure, say Y.
 134
 135if ATA_SFF
 136
 137comment "SFF controllers with custom DMA interface"
 138
 139config PDC_ADMA
 140        tristate "Pacific Digital ADMA support"
 141        depends on PCI
 142        help
 143          This option enables support for Pacific Digital ADMA controllers
 144
 145          If unsure, say N.
 146
 147config PATA_OCTEON_CF
 148        tristate "OCTEON Boot Bus Compact Flash support"
 149        depends on CPU_CAVIUM_OCTEON
 150        help
 151          This option enables a polled compact flash driver for use with
 152          compact flash cards attached to the OCTEON boot bus.
 153
 154          If unsure, say N.
 155
 156config SATA_QSTOR
 157        tristate "Pacific Digital SATA QStor support"
 158        depends on PCI
 159        help
 160          This option enables support for Pacific Digital Serial ATA QStor.
 161
 162          If unsure, say N.
 163
 164config SATA_SX4
 165        tristate "Promise SATA SX4 support (Experimental)"
 166        depends on PCI && EXPERIMENTAL
 167        help
 168          This option enables support for Promise Serial ATA SX4.
 169
 170          If unsure, say N.
 171
 172config ATA_BMDMA
 173        bool "ATA BMDMA support"
 174        default y
 175        help
 176          This option adds support for SFF ATA controllers with BMDMA
 177          capability.  BMDMA stands for bus-master DMA and is the
 178          de facto DMA interface for SFF controllers.
 179
 180          If unsure, say Y.
 181
 182if ATA_BMDMA
 183
 184comment "SATA SFF controllers with BMDMA"
 185
 186config ATA_PIIX
 187        tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 188        depends on PCI
 189        help
 190          This option enables support for ICH5/6/7/8 Serial ATA
 191          and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 192          host controllers.
 193
 194          If unsure, say N.
 195
 196config SATA_DWC
 197        tristate "DesignWare Cores SATA support"
 198        depends on 460EX
 199        help
 200          This option enables support for the on-chip SATA controller of the
 201          AppliedMicro processor 460EX.
 202
 203          If unsure, say N.
 204
 205config SATA_DWC_DEBUG
 206        bool "Debugging driver version"
 207        depends on SATA_DWC
 208        help
 209          This option enables debugging output in the driver.
 210
 211config SATA_DWC_VDEBUG
 212        bool "Verbose debug output"
 213        depends on SATA_DWC_DEBUG
 214        help
 215          This option enables the taskfile dumping and NCQ debugging.
 216
 217config SATA_MV
 218        tristate "Marvell SATA support"
 219        help
 220          This option enables support for the Marvell Serial ATA family.
 221          Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 222          as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 223
 224          If unsure, say N.
 225
 226config SATA_NV
 227        tristate "NVIDIA SATA support"
 228        depends on PCI
 229        help
 230          This option enables support for NVIDIA Serial ATA.
 231
 232          If unsure, say N.
 233
 234config SATA_PROMISE
 235        tristate "Promise SATA TX2/TX4 support"
 236        depends on PCI
 237        help
 238          This option enables support for Promise Serial ATA TX2/TX4.
 239
 240          If unsure, say N.
 241
 242config SATA_SIL
 243        tristate "Silicon Image SATA support"
 244        depends on PCI
 245        help
 246          This option enables support for Silicon Image Serial ATA.
 247
 248          If unsure, say N.
 249
 250config SATA_SIS
 251        tristate "SiS 964/965/966/180 SATA support"
 252        depends on PCI
 253        select PATA_SIS
 254        help
 255          This option enables support for SiS Serial ATA on
 256          SiS 964/965/966/180 and Parallel ATA on SiS 180.
 257          The PATA support for SiS 180 requires additionally to
 258          enable the PATA_SIS driver in the config.
 259          If unsure, say N.
 260
 261config SATA_SVW
 262        tristate "ServerWorks Frodo / Apple K2 SATA support"
 263        depends on PCI
 264        help
 265          This option enables support for Broadcom/Serverworks/Apple K2
 266          SATA support.
 267
 268          If unsure, say N.
 269
 270config SATA_ULI
 271        tristate "ULi Electronics SATA support"
 272        depends on PCI
 273        help
 274          This option enables support for ULi Electronics SATA.
 275
 276          If unsure, say N.
 277
 278config SATA_VIA
 279        tristate "VIA SATA support"
 280        depends on PCI
 281        help
 282          This option enables support for VIA Serial ATA.
 283
 284          If unsure, say N.
 285
 286config SATA_VITESSE
 287        tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 288        depends on PCI
 289        help
 290          This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 291
 292          If unsure, say N.
 293
 294comment "PATA SFF controllers with BMDMA"
 295
 296config PATA_ALI
 297        tristate "ALi PATA support"
 298        depends on PCI
 299        help
 300          This option enables support for the ALi ATA interfaces
 301          found on the many ALi chipsets.
 302
 303          If unsure, say N.
 304
 305config PATA_AMD
 306        tristate "AMD/NVidia PATA support"
 307        depends on PCI
 308        help
 309          This option enables support for the AMD and NVidia PATA
 310          interfaces found on the chipsets for Athlon/Athlon64.
 311
 312          If unsure, say N.
 313
 314config PATA_ARASAN_CF
 315        tristate "ARASAN CompactFlash PATA Controller Support"
 316        depends on DMADEVICES
 317        select DMA_ENGINE
 318        help
 319          Say Y here to support the ARASAN CompactFlash PATA controller
 320
 321config PATA_ARTOP
 322        tristate "ARTOP 6210/6260 PATA support"
 323        depends on PCI
 324        help
 325          This option enables support for ARTOP PATA controllers.
 326
 327          If unsure, say N.
 328
 329config PATA_ATIIXP
 330        tristate "ATI PATA support"
 331        depends on PCI
 332        help
 333          This option enables support for the ATI ATA interfaces
 334          found on the many ATI chipsets.
 335
 336          If unsure, say N.
 337
 338config PATA_ATP867X
 339        tristate "ARTOP/Acard ATP867X PATA support"
 340        depends on PCI
 341        help
 342          This option enables support for ARTOP/Acard ATP867X PATA
 343          controllers.
 344
 345          If unsure, say N.
 346
 347config PATA_BF54X
 348        tristate "Blackfin 54x ATAPI support"
 349        depends on BF542 || BF548 || BF549
 350        help
 351          This option enables support for the built-in ATAPI controller on
 352          Blackfin 54x family chips.
 353
 354          If unsure, say N.
 355
 356config PATA_CMD64X
 357        tristate "CMD64x PATA support"
 358        depends on PCI
 359        help
 360          This option enables support for the CMD64x series chips
 361          except for the CMD640.
 362
 363          If unsure, say N.
 364
 365config PATA_CS5520
 366        tristate "CS5510/5520 PATA support"
 367        depends on PCI
 368        help
 369          This option enables support for the Cyrix 5510/5520
 370          companion chip used with the MediaGX/Geode processor family.
 371
 372          If unsure, say N.
 373
 374config PATA_CS5530
 375        tristate "CS5530 PATA support"
 376        depends on PCI
 377        help
 378          This option enables support for the Cyrix/NatSemi/AMD CS5530
 379          companion chip used with the MediaGX/Geode processor family.
 380
 381          If unsure, say N.
 382
 383config PATA_CS5535
 384        tristate "CS5535 PATA support (Experimental)"
 385        depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 386        help
 387          This option enables support for the NatSemi/AMD CS5535
 388          companion chip used with the Geode processor family.
 389
 390          If unsure, say N.
 391
 392config PATA_CS5536
 393        tristate "CS5536 PATA support"
 394        depends on PCI
 395        help
 396          This option enables support for the AMD CS5536
 397          companion chip used with the Geode LX processor family.
 398
 399          If unsure, say N.
 400
 401config PATA_CYPRESS
 402        tristate "Cypress CY82C693 PATA support (Very Experimental)"
 403        depends on PCI && EXPERIMENTAL
 404        help
 405          This option enables support for the Cypress/Contaq CY82C693
 406          chipset found in some Alpha systems
 407
 408          If unsure, say N.
 409
 410config PATA_EFAR
 411        tristate "EFAR SLC90E66 support"
 412        depends on PCI
 413        help
 414          This option enables support for the EFAR SLC90E66
 415          IDE controller found on some older machines.
 416
 417          If unsure, say N.
 418
 419config PATA_EP93XX
 420        tristate "Cirrus Logic EP93xx PATA support"
 421        depends on ARCH_EP93XX
 422        help
 423          This option enables support for the PATA controller in
 424          the Cirrus Logic EP9312 and EP9315 ARM CPU.
 425
 426          If unsure, say N.
 427
 428config PATA_HPT366
 429        tristate "HPT 366/368 PATA support"
 430        depends on PCI
 431        help
 432          This option enables support for the HPT 366 and 368
 433          PATA controllers via the new ATA layer.
 434
 435          If unsure, say N.
 436
 437config PATA_HPT37X
 438        tristate "HPT 370/370A/371/372/374/302 PATA support"
 439        depends on PCI
 440        help
 441          This option enables support for the majority of the later HPT
 442          PATA controllers via the new ATA layer.
 443
 444          If unsure, say N.
 445
 446config PATA_HPT3X2N
 447        tristate "HPT 371N/372N/302N PATA support"
 448        depends on PCI
 449        help
 450          This option enables support for the N variant HPT PATA
 451          controllers via the new ATA layer.
 452
 453          If unsure, say N.
 454
 455config PATA_HPT3X3
 456        tristate "HPT 343/363 PATA support"
 457        depends on PCI
 458        help
 459          This option enables support for the HPT 343/363
 460          PATA controllers via the new ATA layer
 461
 462          If unsure, say N.
 463
 464config PATA_HPT3X3_DMA
 465        bool "HPT 343/363 DMA support"
 466        depends on PATA_HPT3X3
 467        help
 468          This option enables DMA support for the HPT343/363
 469          controllers. Enable with care as there are still some
 470          problems with DMA on this chipset.
 471
 472config PATA_ICSIDE
 473        tristate "Acorn ICS PATA support"
 474        depends on ARM && ARCH_ACORN
 475        help
 476          On Acorn systems, say Y here if you wish to use the ICS PATA
 477          interface card.  This is not required for ICS partition support.
 478          If you are unsure, say N to this.
 479
 480config PATA_IMX
 481        tristate "PATA support for Freescale iMX"
 482        depends on ARCH_MXC
 483        help
 484          This option enables support for the PATA host available on Freescale
 485          iMX SoCs.
 486
 487          If unsure, say N.
 488
 489config PATA_IT8213
 490        tristate "IT8213 PATA support (Experimental)"
 491        depends on PCI && EXPERIMENTAL
 492        help
 493          This option enables support for the ITE 821 PATA
 494          controllers via the new ATA layer.
 495
 496          If unsure, say N.
 497
 498config PATA_IT821X
 499        tristate "IT8211/2 PATA support"
 500        depends on PCI
 501        help
 502          This option enables support for the ITE 8211 and 8212
 503          PATA controllers via the new ATA layer, including RAID
 504          mode.
 505
 506          If unsure, say N.
 507
 508config PATA_JMICRON
 509        tristate "JMicron PATA support"
 510        depends on PCI
 511        help
 512          Enable support for the JMicron IDE controller, via the new
 513          ATA layer.
 514
 515          If unsure, say N.
 516
 517config PATA_MACIO
 518        tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 519        depends on PPC_PMAC
 520        help
 521          Most IDE capable PowerMacs have IDE busses driven by a variant
 522          of this controller which is part of the Apple chipset used on
 523          most PowerMac models. Some models have multiple busses using
 524          different chipsets, though generally, MacIO is one of them.
 525
 526config PATA_MARVELL
 527        tristate "Marvell PATA support via legacy mode"
 528        depends on PCI
 529        help
 530          This option enables limited support for the Marvell 88SE61xx ATA
 531          controllers. If you wish to use only the SATA ports then select
 532          the AHCI driver alone. If you wish to the use the PATA port or
 533          both SATA and PATA include this driver.
 534
 535          If unsure, say N.
 536
 537config PATA_MPC52xx
 538        tristate "Freescale MPC52xx SoC internal IDE"
 539        depends on PPC_MPC52xx && PPC_BESTCOMM
 540        select PPC_BESTCOMM_ATA
 541        help
 542          This option enables support for integrated IDE controller
 543          of the Freescale MPC52xx SoC.
 544
 545          If unsure, say N.
 546
 547config PATA_NETCELL
 548        tristate "NETCELL Revolution RAID support"
 549        depends on PCI
 550        help
 551          This option enables support for the Netcell Revolution RAID
 552          PATA controller.
 553
 554          If unsure, say N.
 555
 556config PATA_NINJA32
 557        tristate "Ninja32/Delkin Cardbus ATA support"
 558        depends on PCI
 559        help
 560          This option enables support for the Ninja32, Delkin and
 561          possibly other brands of Cardbus ATA adapter
 562
 563          If unsure, say N.
 564
 565config PATA_NS87415
 566        tristate "Nat Semi NS87415 PATA support"
 567        depends on PCI
 568        help
 569          This option enables support for the National Semiconductor
 570          NS87415 PCI-IDE controller.
 571
 572          If unsure, say N.
 573
 574config PATA_OLDPIIX
 575        tristate "Intel PATA old PIIX support"
 576        depends on PCI
 577        help
 578          This option enables support for early PIIX PATA support.
 579
 580          If unsure, say N.
 581
 582config PATA_OPTIDMA
 583        tristate "OPTI FireStar PATA support (Very Experimental)"
 584        depends on PCI && EXPERIMENTAL
 585        help
 586          This option enables DMA/PIO support for the later OPTi
 587          controllers found on some old motherboards and in some
 588          laptops.
 589
 590          If unsure, say N.
 591
 592config PATA_PDC2027X
 593        tristate "Promise PATA 2027x support"
 594        depends on PCI
 595        help
 596          This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 597
 598          If unsure, say N.
 599
 600config PATA_PDC_OLD
 601        tristate "Older Promise PATA controller support"
 602        depends on PCI
 603        help
 604          This option enables support for the Promise 20246, 20262, 20263,
 605          20265 and 20267 adapters.
 606
 607          If unsure, say N.
 608
 609config PATA_RADISYS
 610        tristate "RADISYS 82600 PATA support (Experimental)"
 611        depends on PCI && EXPERIMENTAL
 612        help
 613          This option enables support for the RADISYS 82600
 614          PATA controllers via the new ATA layer
 615
 616          If unsure, say N.
 617
 618config PATA_RDC
 619        tristate "RDC PATA support"
 620        depends on PCI
 621        help
 622          This option enables basic support for the later RDC PATA controllers
 623          controllers via the new ATA layer. For the RDC 1010, you need to
 624          enable the IT821X driver instead.
 625
 626          If unsure, say N.
 627
 628config PATA_SC1200
 629        tristate "SC1200 PATA support"
 630        depends on PCI
 631        help
 632          This option enables support for the NatSemi/AMD SC1200 SoC
 633          companion chip used with the Geode processor family.
 634
 635          If unsure, say N.
 636
 637config PATA_SCC
 638        tristate "Toshiba's Cell Reference Set IDE support"
 639        depends on PCI && PPC_CELLEB
 640        help
 641          This option enables support for the built-in IDE controller on
 642          Toshiba Cell Reference Board.
 643
 644          If unsure, say N.
 645
 646config PATA_SCH
 647        tristate "Intel SCH PATA support"
 648        depends on PCI
 649        help
 650          This option enables support for Intel SCH PATA on the Intel
 651          SCH (US15W, US15L, UL11L) series host controllers.
 652
 653          If unsure, say N.
 654
 655config PATA_SERVERWORKS
 656        tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 657        depends on PCI
 658        help
 659          This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 660          HT1000 PATA controllers, via the new ATA layer.
 661
 662          If unsure, say N.
 663
 664config PATA_SIL680
 665        tristate "CMD / Silicon Image 680 PATA support"
 666        depends on PCI
 667        help
 668          This option enables support for CMD / Silicon Image 680 PATA.
 669
 670          If unsure, say N.
 671
 672config PATA_SIS
 673        tristate "SiS PATA support"
 674        depends on PCI
 675        help
 676          This option enables support for SiS PATA controllers
 677
 678          If unsure, say N.
 679
 680config PATA_TOSHIBA
 681        tristate "Toshiba Piccolo support (Experimental)"
 682        depends on PCI && EXPERIMENTAL
 683        help
 684          Support for the Toshiba Piccolo controllers. Currently only the
 685          primary channel is supported by this driver.
 686
 687          If unsure, say N.
 688
 689config PATA_TRIFLEX
 690        tristate "Compaq Triflex PATA support"
 691        depends on PCI
 692        help
 693          Enable support for the Compaq 'Triflex' IDE controller as found
 694          on many Compaq Pentium-Pro systems, via the new ATA layer.
 695
 696          If unsure, say N.
 697
 698config PATA_VIA
 699        tristate "VIA PATA support"
 700        depends on PCI
 701        help
 702          This option enables support for the VIA PATA interfaces
 703          found on the many VIA chipsets.
 704
 705          If unsure, say N.
 706
 707config PATA_PXA
 708        tristate "PXA DMA-capable PATA support"
 709        depends on ARCH_PXA
 710        help
 711          This option enables support for harddrive attached to PXA CPU's bus.
 712
 713          NOTE: This driver utilizes PXA DMA controller, in case your hardware
 714                is not capable of doing MWDMA, use pata_platform instead.
 715
 716          If unsure, say N.
 717
 718config PATA_WINBOND
 719        tristate "Winbond SL82C105 PATA support"
 720        depends on PCI
 721        help
 722          This option enables support for SL82C105 PATA devices found in the
 723          Netwinder and some other systems
 724
 725          If unsure, say N.
 726
 727endif # ATA_BMDMA
 728
 729comment "PIO-only SFF controllers"
 730
 731config PATA_AT32
 732        tristate "Atmel AVR32 PATA support (Experimental)"
 733        depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 734        help
 735          This option enables support for the IDE devices on the
 736          Atmel AT32AP platform.
 737
 738          If unsure, say N.
 739
 740config PATA_AT91
 741        tristate "PATA support for AT91SAM9260"
 742        depends on ARM && ARCH_AT91
 743        help
 744          This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 745
 746          If unsure, say N.
 747
 748config PATA_CMD640_PCI
 749        tristate "CMD640 PCI PATA support (Experimental)"
 750        depends on PCI && EXPERIMENTAL
 751        help
 752          This option enables support for the CMD640 PCI IDE
 753          interface chip. Only the primary channel is currently
 754          supported.
 755
 756          If unsure, say N.
 757
 758config PATA_ISAPNP
 759        tristate "ISA Plug and Play PATA support"
 760        depends on ISAPNP
 761        help
 762          This option enables support for ISA plug & play ATA
 763          controllers such as those found on old soundcards.
 764
 765          If unsure, say N.
 766
 767config PATA_IXP4XX_CF
 768        tristate "IXP4XX Compact Flash support"
 769        depends on ARCH_IXP4XX
 770        help
 771          This option enables support for a Compact Flash connected on
 772          the ixp4xx expansion bus. This driver had been written for
 773          Loft/Avila boards in mind but can work with others.
 774
 775          If unsure, say N.
 776
 777config PATA_MPIIX
 778        tristate "Intel PATA MPIIX support"
 779        depends on PCI
 780        help
 781          This option enables support for MPIIX PATA support.
 782
 783          If unsure, say N.
 784
 785config PATA_NS87410
 786        tristate "Nat Semi NS87410 PATA support"
 787        depends on PCI
 788        help
 789          This option enables support for the National Semiconductor
 790          NS87410 PCI-IDE controller.
 791
 792          If unsure, say N.
 793
 794config PATA_OPTI
 795        tristate "OPTI621/6215 PATA support (Very Experimental)"
 796        depends on PCI && EXPERIMENTAL
 797        help
 798          This option enables full PIO support for the early Opti ATA
 799          controllers found on some old motherboards.
 800
 801          If unsure, say N.
 802
 803config PATA_PALMLD
 804        tristate "Palm LifeDrive PATA support"
 805        depends on MACH_PALMLD
 806        help
 807          This option enables support for Palm LifeDrive's internal ATA
 808          port via the new ATA layer.
 809
 810          If unsure, say N.
 811
 812config PATA_PCMCIA
 813        tristate "PCMCIA PATA support"
 814        depends on PCMCIA
 815        help
 816          This option enables support for PCMCIA ATA interfaces, including
 817          compact flash card adapters via the new ATA layer.
 818
 819          If unsure, say N.
 820
 821config PATA_PLATFORM
 822        tristate "Generic platform device PATA support"
 823        depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 824        help
 825          This option enables support for generic directly connected ATA
 826          devices commonly found on embedded systems.
 827
 828          If unsure, say N.
 829
 830config PATA_OF_PLATFORM
 831        tristate "OpenFirmware platform device PATA support"
 832        depends on PATA_PLATFORM && OF
 833        help
 834          This option enables support for generic directly connected ATA
 835          devices commonly found on embedded systems with OpenFirmware
 836          bindings.
 837
 838          If unsure, say N.
 839
 840config PATA_QDI
 841        tristate "QDI VLB PATA support"
 842        depends on ISA
 843        select PATA_LEGACY
 844        help
 845          Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 846
 847config PATA_RB532
 848        tristate "RouterBoard 532 PATA CompactFlash support"
 849        depends on MIKROTIK_RB532
 850        help
 851          This option enables support for the RouterBoard 532
 852          PATA CompactFlash controller.
 853
 854          If unsure, say N.
 855
 856config PATA_RZ1000
 857        tristate "PC Tech RZ1000 PATA support"
 858        depends on PCI
 859        help
 860          This option enables basic support for the PC Tech RZ1000/1
 861          PATA controllers via the new ATA layer
 862
 863          If unsure, say N.
 864
 865config PATA_SAMSUNG_CF
 866        tristate "Samsung SoC PATA support"
 867        depends on SAMSUNG_DEV_IDE
 868        help
 869          This option enables basic support for Samsung's S3C/S5P board
 870          PATA controllers via the new ATA layer
 871
 872          If unsure, say N.
 873
 874config PATA_WINBOND_VLB
 875        tristate "Winbond W83759A VLB PATA support (Experimental)"
 876        depends on ISA && EXPERIMENTAL
 877        select PATA_LEGACY
 878        help
 879          Support for the Winbond W83759A controller on Vesa Local Bus
 880          systems.
 881
 882comment "Generic fallback / legacy drivers"
 883
 884config PATA_ACPI
 885        tristate "ACPI firmware driver for PATA"
 886        depends on ATA_ACPI && ATA_BMDMA
 887        help
 888          This option enables an ACPI method driver which drives
 889          motherboard PATA controller interfaces through the ACPI
 890          firmware in the BIOS. This driver can sometimes handle
 891          otherwise unsupported hardware.
 892
 893config ATA_GENERIC
 894        tristate "Generic ATA support"
 895        depends on PCI && ATA_BMDMA
 896        help
 897          This option enables support for generic BIOS configured
 898          ATA controllers via the new ATA layer
 899
 900          If unsure, say N.
 901
 902config PATA_LEGACY
 903        tristate "Legacy ISA PATA support (Experimental)"
 904        depends on (ISA || PCI) && EXPERIMENTAL
 905        help
 906          This option enables support for ISA/VLB/PCI bus legacy PATA
 907          ports and allows them to be accessed via the new ATA layer.
 908
 909          If unsure, say N.
 910
 911endif # ATA_SFF
 912endif # ATA
 913
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.