#ifndef _SCSI_SCSI_CMND_H
#define _SCSI_SCSI_CMND_H

#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>

struct Scsi_Host;
struct scsi_device;
struct scsi_driver;

/*
 * MAX_COMMAND_SIZE is:
 * The longest fixed-length SCSI CDB as per the SCSI standard.
 * fixed-length means: commands that their size can be determined
 * by their opcode and the CDB does not carry a length specifier, (unlike
 * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
 * true and the SCSI standard also defines extended commands and
 * vendor specific commands that can be bigger than 16 bytes. The kernel
 * will support these using the same infrastructure used for VARLEN CDB's.
 * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
 * supports without specifying a cmd_len by ULD's
 */
#define MAX_COMMAND_SIZE 16
#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
#endif

struct scsi_data_buffer {
        struct sg_table table;
        unsigned length;
        int resid;
};

/* embedded in scsi_cmnd */
struct scsi_pointer {
        char *ptr;              /* data pointer */
        int this_residual;      /* left in this buffer */
        struct scatterlist *buffer;     /* which buffer */
        int buffers_residual;   /* how many buffers left */

        dma_addr_t dma_handle;

        volatile int Status;
        volatile int Message;
        volatile int have_data_in;
        volatile int sent_command;
        volatile int phase;
};

struct scsi_cmnd {
        struct scsi_device *device;
        struct list_head list;  /* scsi_cmnd participates in queue lists */
        struct list_head eh_entry; /* entry for the host eh_cmd_q */
        int eh_eflags;          /* Used by error handlr */

        /*
         * A SCSI Command is assigned a nonzero serial_number before passed
         * to the driver's queue command function.  The serial_number is
         * cleared when scsi_done is entered indicating that the command
         * has been completed.  It is a bug for LLDDs to use this number
         * for purposes other than printk (and even that is only useful
         * for debugging).
         */
        unsigned long serial_number;

        /*
         * This is set to jiffies as it was when the command was first
         * allocated.  It is used to time how long the command has
         * been outstanding
         */
        unsigned long jiffies_at_alloc;

        int retries;
        int allowed;

        unsigned char prot_op;
        unsigned char prot_type;

        unsigned short cmd_len;
        enum dma_data_direction sc_data_direction;

        /* These elements define the operation we are about to perform */
        unsigned char *cmnd;


        /* These elements define the operation we ultimately want to perform */
        struct scsi_data_buffer sdb;
        struct scsi_data_buffer *prot_sdb;

        unsigned underflow;     /* Return error if less than
                                   this amount is transferred */

        unsigned transfersize;  /* How much we are guaranteed to
                                   transfer with each SCSI transfer
                                   (ie, between disconnect / 
                                   reconnects.   Probably == sector
                                   size */

        struct request *request;        /* The command we are
                                           working on */

#define SCSI_SENSE_BUFFERSIZE   96
        unsigned char *sense_buffer;
                                /* obtained by REQUEST SENSE when
                                 * CHECK CONDITION is received on original
                                 * command (auto-sense) */

        /* Low-level done function - can be used by low-level driver to point
         *        to completion function.  Not used by mid/upper level code. */
        void (*scsi_done) (struct scsi_cmnd *);

        /*
         * The following fields can be written to by the host specific code. 
         * Everything else should be left alone. 
         */
        struct scsi_pointer SCp;        /* Scratchpad used by some host adapters */

        unsigned char *host_scribble;   /* The host adapter is allowed to
                                         * call scsi_malloc and get some memory
                                         * and hang it here.  The host adapter
                                         * is also expected to call scsi_free
                                         * to release this memory.  (The memory
                                         * obtained by scsi_malloc is guaranteed
                                         * to be at an address < 16Mb). */

        int result;             /* Status code from lower level driver */

        unsigned char tag;      /* SCSI-II queued command tag */
};

static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
        struct scsi_driver **sdp;

        if (!cmd->request->rq_disk)
                return NULL;

        sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
        if (!sdp)
                return NULL;

        return *sdp;
}

extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void __scsi_put_command(struct Scsi_Host *, struct scsi_cmnd *,
                               struct device *);
extern void scsi_finish_command(struct scsi_cmnd *cmd);

extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
                                 size_t *offset, size_t *len);
extern void scsi_kunmap_atomic_sg(void *virt);

extern int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask);
extern void scsi_release_buffers(struct scsi_cmnd *cmd);

extern int scsi_dma_map(struct scsi_cmnd *cmd);
extern void scsi_dma_unmap(struct scsi_cmnd *cmd);

struct scsi_cmnd *scsi_allocate_command(gfp_t gfp_mask);
void scsi_free_command(gfp_t gfp_mask, struct scsi_cmnd *cmd);

static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
{
        return cmd->sdb.table.nents;
}

static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
{
        return cmd->sdb.table.sgl;
}

static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
{
        return cmd->sdb.length;
}

static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
{
        cmd->sdb.resid = resid;
}

static inline int scsi_get_resid(struct scsi_cmnd *cmd)
{
        return cmd->sdb.resid;
}

#define scsi_for_each_sg(cmd, sg, nseg, __i)                    \
        for_each_sg(scsi_sglist(cmd), sg, nseg, __i)

static inline int scsi_bidi_cmnd(struct scsi_cmnd *cmd)
{
        return blk_bidi_rq(cmd->request) &&
                (cmd->request->next_rq->special != NULL);
}

static inline struct scsi_data_buffer *scsi_in(struct scsi_cmnd *cmd)
{
        return scsi_bidi_cmnd(cmd) ?
                cmd->request->next_rq->special : &cmd->sdb;
}

static inline struct scsi_data_buffer *scsi_out(struct scsi_cmnd *cmd)
{
        return &cmd->sdb;
}

static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
                                           void *buf, int buflen)
{
        return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
                                   buf, buflen);
}

static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
                                         void *buf, int buflen)
{
        return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
                                 buf, buflen);
}

/*
 * The operations below are hints that tell the controller driver how
 * to handle I/Os with DIF or similar types of protection information.
 */
enum scsi_prot_operations {
        /* Normal I/O */
        SCSI_PROT_NORMAL = 0,

        /* OS-HBA: Protected, HBA-Target: Unprotected */
        SCSI_PROT_READ_INSERT,
        SCSI_PROT_WRITE_STRIP,

        /* OS-HBA: Unprotected, HBA-Target: Protected */
        SCSI_PROT_READ_STRIP,
        SCSI_PROT_WRITE_INSERT,

        /* OS-HBA: Protected, HBA-Target: Protected */
        SCSI_PROT_READ_PASS,
        SCSI_PROT_WRITE_PASS,
};

static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
{
        scmd->prot_op = op;
}

static inline unsigned char scsi_get_prot_op(struct scsi_cmnd *scmd)
{
        return scmd->prot_op;
}

/*
 * The controller usually does not know anything about the target it
 * is communicating with.  However, when DIX is enabled the controller
 * must be know target type so it can verify the protection
 * information passed along with the I/O.
 */
enum scsi_prot_target_type {
        SCSI_PROT_DIF_TYPE0 = 0,
        SCSI_PROT_DIF_TYPE1,
        SCSI_PROT_DIF_TYPE2,
        SCSI_PROT_DIF_TYPE3,
};

static inline void scsi_set_prot_type(struct scsi_cmnd *scmd, unsigned char type)
{
        scmd->prot_type = type;
}

static inline unsigned char scsi_get_prot_type(struct scsi_cmnd *scmd)
{
        return scmd->prot_type;
}

static inline sector_t scsi_get_lba(struct scsi_cmnd *scmd)
{
        return blk_rq_pos(scmd->request);
}

static inline unsigned scsi_prot_sg_count(struct scsi_cmnd *cmd)
{
        return cmd->prot_sdb ? cmd->prot_sdb->table.nents : 0;
}

static inline struct scatterlist *scsi_prot_sglist(struct scsi_cmnd *cmd)
{
        return cmd->prot_sdb ? cmd->prot_sdb->table.sgl : NULL;
}

static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd)
{
        return cmd->prot_sdb;
}

#define scsi_for_each_prot_sg(cmd, sg, nseg, __i)               \
        for_each_sg(scsi_prot_sglist(cmd), sg, nseg, __i)

static inline void set_msg_byte(struct scsi_cmnd *cmd, char status)
{
        cmd->result = (cmd->result & 0xffff00ff) | (status << 8);
}

static inline void set_host_byte(struct scsi_cmnd *cmd, char status)
{
        cmd->result = (cmd->result & 0xff00ffff) | (status << 16);
}

static inline void set_driver_byte(struct scsi_cmnd *cmd, char status)
{
        cmd->result = (cmd->result & 0x00ffffff) | (status << 24);
}

#endif /* _SCSI_SCSI_CMND_H */