linux/include/linux/cyclades.h
<<
>>
Prefs
   1/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
   2 * linux/include/linux/cyclades.h
   3 *
   4 * This file was initially written by
   5 * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
   6 * Ivan Passos <ivan@cyclades.com>.
   7 *
   8 * This file contains the general definitions for the cyclades.c driver
   9 *$Log: cyclades.h,v $
  10 *Revision 3.1  2002/01/29 11:36:16  henrique
  11 *added throttle field on struct cyclades_port to indicate whether the
  12 *port is throttled or not
  13 *
  14 *Revision 3.1  2000/04/19 18:52:52  ivan
  15 *converted address fields to unsigned long and added fields for physical
  16 *addresses on cyclades_card structure;
  17 *
  18 *Revision 3.0  1998/11/02 14:20:59  ivan
  19 *added nports field on cyclades_card structure;
  20 *
  21 *Revision 2.5  1998/08/03 16:57:01  ivan
  22 *added cyclades_idle_stats structure;
  23 * 
  24 *Revision 2.4  1998/06/01 12:09:53  ivan
  25 *removed closing_wait2 from cyclades_port structure;
  26 *
  27 *Revision 2.3  1998/03/16 18:01:12  ivan
  28 *changes in the cyclades_port structure to get it closer to the 
  29 *standard serial port structure;
  30 *added constants for new ioctls;
  31 *
  32 *Revision 2.2  1998/02/17 16:50:00  ivan
  33 *changes in the cyclades_port structure (addition of shutdown_wait and 
  34 *chip_rev variables);
  35 *added constants for new ioctls and for CD1400 rev. numbers.
  36 *
  37 *Revision 2.1  1997/10/24 16:03:00  ivan
  38 *added rflow (which allows enabling the CD1400 special flow control 
  39 *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to 
  40 *cyclades_port structure;
  41 *added Alpha support
  42 *
  43 *Revision 2.0  1997/06/30 10:30:00  ivan
  44 *added some new doorbell command constants related to IOCTLW and
  45 *UART error signaling
  46 *
  47 *Revision 1.8  1997/06/03 15:30:00  ivan
  48 *added constant ZFIRM_HLT
  49 *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
  50 *
  51 *Revision 1.7  1997/03/26 10:30:00  daniel
  52 *new entries at the end of cyclades_port struct to reallocate
  53 *variables illegally allocated within card memory.
  54 *
  55 *Revision 1.6  1996/09/09 18:35:30  bentson
  56 *fold in changes for Cyclom-Z -- including structures for
  57 *communicating with board as well modest changes to original
  58 *structures to support new features.
  59 *
  60 *Revision 1.5  1995/11/13 21:13:31  bentson
  61 *changes suggested by Michael Chastain <mec@duracef.shout.net>
  62 *to support use of this file in non-kernel applications
  63 *
  64 *
  65 */
  66
  67#ifndef _LINUX_CYCLADES_H
  68#define _LINUX_CYCLADES_H
  69
  70#include <linux/types.h>
  71
  72struct cyclades_monitor {
  73        unsigned long           int_count;
  74        unsigned long           char_count;
  75        unsigned long           char_max;
  76        unsigned long           char_last;
  77};
  78
  79/*
  80 * These stats all reflect activity since the device was last initialized.
  81 * (i.e., since the port was opened with no other processes already having it
  82 * open)
  83 */
  84struct cyclades_idle_stats {
  85    __kernel_time_t in_use;     /* Time device has been in use (secs) */
  86    __kernel_time_t recv_idle;  /* Time since last char received (secs) */
  87    __kernel_time_t xmit_idle;  /* Time since last char transmitted (secs) */
  88    unsigned long  recv_bytes;  /* Bytes received */
  89    unsigned long  xmit_bytes;  /* Bytes transmitted */
  90    unsigned long  overruns;    /* Input overruns */
  91    unsigned long  frame_errs;  /* Input framing errors */
  92    unsigned long  parity_errs; /* Input parity errors */
  93};
  94
  95#define CYCLADES_MAGIC  0x4359
  96
  97#define CYGETMON                0x435901
  98#define CYGETTHRESH             0x435902
  99#define CYSETTHRESH             0x435903
 100#define CYGETDEFTHRESH          0x435904
 101#define CYSETDEFTHRESH          0x435905
 102#define CYGETTIMEOUT            0x435906
 103#define CYSETTIMEOUT            0x435907
 104#define CYGETDEFTIMEOUT         0x435908
 105#define CYSETDEFTIMEOUT         0x435909
 106#define CYSETRFLOW              0x43590a
 107#define CYGETRFLOW              0x43590b
 108#define CYSETRTSDTR_INV         0x43590c
 109#define CYGETRTSDTR_INV         0x43590d
 110#define CYZSETPOLLCYCLE         0x43590e
 111#define CYZGETPOLLCYCLE         0x43590f
 112#define CYGETCD1400VER          0x435910
 113#define CYSETWAIT               0x435912
 114#define CYGETWAIT               0x435913
 115
 116/*************** CYCLOM-Z ADDITIONS ***************/
 117
 118#define CZIOC           ('M' << 8)
 119#define CZ_NBOARDS      (CZIOC|0xfa)
 120#define CZ_BOOT_START   (CZIOC|0xfb)
 121#define CZ_BOOT_DATA    (CZIOC|0xfc)
 122#define CZ_BOOT_END     (CZIOC|0xfd)
 123#define CZ_TEST         (CZIOC|0xfe)
 124
 125#define CZ_DEF_POLL     (HZ/25)
 126
 127#define MAX_BOARD       4       /* Max number of boards */
 128#define MAX_DEV         256     /* Max number of ports total */
 129#define CYZ_MAX_SPEED   921600
 130
 131#define CYZ_FIFO_SIZE   16
 132
 133#define CYZ_BOOT_NWORDS 0x100
 134struct CYZ_BOOT_CTRL {
 135        unsigned short  nboard;
 136        int             status[MAX_BOARD];
 137        int             nchannel[MAX_BOARD];
 138        int             fw_rev[MAX_BOARD];
 139        unsigned long   offset;
 140        unsigned long   data[CYZ_BOOT_NWORDS];
 141};
 142
 143
 144#ifndef DP_WINDOW_SIZE
 145/*
 146 *      Memory Window Sizes
 147 */
 148
 149#define DP_WINDOW_SIZE          (0x00080000)    /* window size 512 Kb */
 150#define ZE_DP_WINDOW_SIZE       (0x00100000)    /* window size 1 Mb (Ze and
 151                                                  8Zo V.2 */
 152#define CTRL_WINDOW_SIZE        (0x00000080)    /* runtime regs 128 bytes */
 153
 154/*
 155 *      CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
 156 *      normally will access only interested on the fpga_id, fpga_version,
 157 *      start_cpu and stop_cpu.
 158 */
 159
 160struct  CUSTOM_REG {
 161        __u32   fpga_id;                /* FPGA Identification Register */
 162        __u32   fpga_version;           /* FPGA Version Number Register */
 163        __u32   cpu_start;              /* CPU start Register (write) */
 164        __u32   cpu_stop;               /* CPU stop Register (write) */
 165        __u32   misc_reg;               /* Miscellaneous Register */
 166        __u32   idt_mode;               /* IDT mode Register */
 167        __u32   uart_irq_status;        /* UART IRQ status Register */
 168        __u32   clear_timer0_irq;       /* Clear timer interrupt Register */
 169        __u32   clear_timer1_irq;       /* Clear timer interrupt Register */
 170        __u32   clear_timer2_irq;       /* Clear timer interrupt Register */
 171        __u32   test_register;          /* Test Register */
 172        __u32   test_count;             /* Test Count Register */
 173        __u32   timer_select;           /* Timer select register */
 174        __u32   pr_uart_irq_status;     /* Prioritized UART IRQ stat Reg */
 175        __u32   ram_wait_state;         /* RAM wait-state Register */
 176        __u32   uart_wait_state;        /* UART wait-state Register */
 177        __u32   timer_wait_state;       /* timer wait-state Register */
 178        __u32   ack_wait_state;         /* ACK wait State Register */
 179};
 180
 181/*
 182 *      RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
 183 *      registers. This structure can be used to access the 9060 registers
 184 *      (memory mapped).
 185 */
 186
 187struct RUNTIME_9060 {
 188        __u32   loc_addr_range; /* 00h - Local Address Range */
 189        __u32   loc_addr_base;  /* 04h - Local Address Base */
 190        __u32   loc_arbitr;     /* 08h - Local Arbitration */
 191        __u32   endian_descr;   /* 0Ch - Big/Little Endian Descriptor */
 192        __u32   loc_rom_range;  /* 10h - Local ROM Range */
 193        __u32   loc_rom_base;   /* 14h - Local ROM Base */
 194        __u32   loc_bus_descr;  /* 18h - Local Bus descriptor */
 195        __u32   loc_range_mst;  /* 1Ch - Local Range for Master to PCI */
 196        __u32   loc_base_mst;   /* 20h - Local Base for Master PCI */
 197        __u32   loc_range_io;   /* 24h - Local Range for Master IO */
 198        __u32   pci_base_mst;   /* 28h - PCI Base for Master PCI */
 199        __u32   pci_conf_io;    /* 2Ch - PCI configuration for Master IO */
 200        __u32   filler1;        /* 30h */
 201        __u32   filler2;        /* 34h */
 202        __u32   filler3;        /* 38h */
 203        __u32   filler4;        /* 3Ch */
 204        __u32   mail_box_0;     /* 40h - Mail Box 0 */
 205        __u32   mail_box_1;     /* 44h - Mail Box 1 */
 206        __u32   mail_box_2;     /* 48h - Mail Box 2 */
 207        __u32   mail_box_3;     /* 4Ch - Mail Box 3 */
 208        __u32   filler5;        /* 50h */
 209        __u32   filler6;        /* 54h */
 210        __u32   filler7;        /* 58h */
 211        __u32   filler8;        /* 5Ch */
 212        __u32   pci_doorbell;   /* 60h - PCI to Local Doorbell */
 213        __u32   loc_doorbell;   /* 64h - Local to PCI Doorbell */
 214        __u32   intr_ctrl_stat; /* 68h - Interrupt Control/Status */
 215        __u32   init_ctrl;      /* 6Ch - EEPROM control, Init Control, etc */
 216};
 217
 218/* Values for the Local Base Address re-map register */
 219
 220#define WIN_RAM         0x00000001L     /* set the sliding window to RAM */
 221#define WIN_CREG        0x14000001L     /* set the window to custom Registers */
 222
 223/* Values timer select registers */
 224
 225#define TIMER_BY_1M     0x00            /* clock divided by 1M */
 226#define TIMER_BY_256K   0x01            /* clock divided by 256k */
 227#define TIMER_BY_128K   0x02            /* clock divided by 128k */
 228#define TIMER_BY_32K    0x03            /* clock divided by 32k */
 229
 230/****************** ****************** *******************/
 231#endif
 232
 233#ifndef ZFIRM_ID
 234/* #include "zfwint.h" */
 235/****************** ****************** *******************/
 236/*
 237 *      This file contains the definitions for interfacing with the
 238 *      Cyclom-Z ZFIRM Firmware.
 239 */
 240
 241/* General Constant definitions */
 242
 243#define MAX_CHAN        64              /* max number of channels per board */
 244
 245/* firmware id structure (set after boot) */
 246
 247#define ID_ADDRESS      0x00000180L     /* signature/pointer address */
 248#define ZFIRM_ID        0x5557465AL     /* ZFIRM/U signature */
 249#define ZFIRM_HLT       0x59505B5CL     /* ZFIRM needs external power supply */
 250#define ZFIRM_RST       0x56040674L     /* RST signal (due to FW reset) */
 251
 252#define ZF_TINACT_DEF   1000            /* default inactivity timeout 
 253                                           (1000 ms) */
 254#define ZF_TINACT       ZF_TINACT_DEF
 255
 256struct  FIRM_ID {
 257        __u32   signature;              /* ZFIRM/U signature */
 258        __u32   zfwctrl_addr;           /* pointer to ZFW_CTRL structure */
 259};
 260
 261/* Op. System id */
 262
 263#define C_OS_LINUX      0x00000030      /* generic Linux system */
 264
 265/* channel op_mode */
 266
 267#define C_CH_DISABLE    0x00000000      /* channel is disabled */
 268#define C_CH_TXENABLE   0x00000001      /* channel Tx enabled */
 269#define C_CH_RXENABLE   0x00000002      /* channel Rx enabled */
 270#define C_CH_ENABLE     0x00000003      /* channel Tx/Rx enabled */
 271#define C_CH_LOOPBACK   0x00000004      /* Loopback mode */
 272
 273/* comm_parity - parity */
 274
 275#define C_PR_NONE       0x00000000      /* None */
 276#define C_PR_ODD        0x00000001      /* Odd */
 277#define C_PR_EVEN       0x00000002      /* Even */
 278#define C_PR_MARK       0x00000004      /* Mark */
 279#define C_PR_SPACE      0x00000008      /* Space */
 280#define C_PR_PARITY     0x000000ff
 281
 282#define C_PR_DISCARD    0x00000100      /* discard char with frame/par error */
 283#define C_PR_IGNORE     0x00000200      /* ignore frame/par error */
 284
 285/* comm_data_l - data length and stop bits */
 286
 287#define C_DL_CS5        0x00000001
 288#define C_DL_CS6        0x00000002
 289#define C_DL_CS7        0x00000004
 290#define C_DL_CS8        0x00000008
 291#define C_DL_CS         0x0000000f
 292#define C_DL_1STOP      0x00000010
 293#define C_DL_15STOP     0x00000020
 294#define C_DL_2STOP      0x00000040
 295#define C_DL_STOP       0x000000f0
 296
 297/* interrupt enabling/status */
 298
 299#define C_IN_DISABLE    0x00000000      /* zero, disable interrupts */
 300#define C_IN_TXBEMPTY   0x00000001      /* tx buffer empty */
 301#define C_IN_TXLOWWM    0x00000002      /* tx buffer below LWM */
 302#define C_IN_RXHIWM     0x00000010      /* rx buffer above HWM */
 303#define C_IN_RXNNDT     0x00000020      /* rx no new data timeout */
 304#define C_IN_MDCD       0x00000100      /* modem DCD change */
 305#define C_IN_MDSR       0x00000200      /* modem DSR change */
 306#define C_IN_MRI        0x00000400      /* modem RI change */
 307#define C_IN_MCTS       0x00000800      /* modem CTS change */
 308#define C_IN_RXBRK      0x00001000      /* Break received */
 309#define C_IN_PR_ERROR   0x00002000      /* parity error */
 310#define C_IN_FR_ERROR   0x00004000      /* frame error */
 311#define C_IN_OVR_ERROR  0x00008000      /* overrun error */
 312#define C_IN_RXOFL      0x00010000      /* RX buffer overflow */
 313#define C_IN_IOCTLW     0x00020000      /* I/O control w/ wait */
 314#define C_IN_MRTS       0x00040000      /* modem RTS drop */
 315#define C_IN_ICHAR      0x00080000
 316 
 317/* flow control */
 318
 319#define C_FL_OXX        0x00000001      /* output Xon/Xoff flow control */
 320#define C_FL_IXX        0x00000002      /* output Xon/Xoff flow control */
 321#define C_FL_OIXANY     0x00000004      /* output Xon/Xoff (any xon) */
 322#define C_FL_SWFLOW     0x0000000f
 323
 324/* flow status */
 325
 326#define C_FS_TXIDLE     0x00000000      /* no Tx data in the buffer or UART */
 327#define C_FS_SENDING    0x00000001      /* UART is sending data */
 328#define C_FS_SWFLOW     0x00000002      /* Tx is stopped by received Xoff */
 329
 330/* rs_control/rs_status RS-232 signals */
 331
 332#define C_RS_PARAM      0x80000000      /* Indicates presence of parameter in 
 333                                           IOCTLM command */
 334#define C_RS_RTS        0x00000001      /* RTS */
 335#define C_RS_DTR        0x00000004      /* DTR */
 336#define C_RS_DCD        0x00000100      /* CD */
 337#define C_RS_DSR        0x00000200      /* DSR */
 338#define C_RS_RI         0x00000400      /* RI */
 339#define C_RS_CTS        0x00000800      /* CTS */
 340
 341/* commands Host <-> Board */
 342
 343#define C_CM_RESET      0x01            /* reset/flush buffers */
 344#define C_CM_IOCTL      0x02            /* re-read CH_CTRL */
 345#define C_CM_IOCTLW     0x03            /* re-read CH_CTRL, intr when done */
 346#define C_CM_IOCTLM     0x04            /* RS-232 outputs change */
 347#define C_CM_SENDXOFF   0x10            /* send Xoff */
 348#define C_CM_SENDXON    0x11            /* send Xon */
 349#define C_CM_CLFLOW     0x12            /* Clear flow control (resume) */
 350#define C_CM_SENDBRK    0x41            /* send break */
 351#define C_CM_INTBACK    0x42            /* Interrupt back */
 352#define C_CM_SET_BREAK  0x43            /* Tx break on */
 353#define C_CM_CLR_BREAK  0x44            /* Tx break off */
 354#define C_CM_CMD_DONE   0x45            /* Previous command done */
 355#define C_CM_INTBACK2   0x46            /* Alternate Interrupt back */
 356#define C_CM_TINACT     0x51            /* set inactivity detection */
 357#define C_CM_IRQ_ENBL   0x52            /* enable generation of interrupts */
 358#define C_CM_IRQ_DSBL   0x53            /* disable generation of interrupts */
 359#define C_CM_ACK_ENBL   0x54            /* enable acknowledged interrupt mode */
 360#define C_CM_ACK_DSBL   0x55            /* disable acknowledged intr mode */
 361#define C_CM_FLUSH_RX   0x56            /* flushes Rx buffer */
 362#define C_CM_FLUSH_TX   0x57            /* flushes Tx buffer */
 363#define C_CM_Q_ENABLE   0x58            /* enables queue access from the 
 364                                           driver */
 365#define C_CM_Q_DISABLE  0x59            /* disables queue access from the 
 366                                           driver */
 367
 368#define C_CM_TXBEMPTY   0x60            /* Tx buffer is empty */
 369#define C_CM_TXLOWWM    0x61            /* Tx buffer low water mark */
 370#define C_CM_RXHIWM     0x62            /* Rx buffer high water mark */
 371#define C_CM_RXNNDT     0x63            /* rx no new data timeout */
 372#define C_CM_TXFEMPTY   0x64
 373#define C_CM_ICHAR      0x65
 374#define C_CM_MDCD       0x70            /* modem DCD change */
 375#define C_CM_MDSR       0x71            /* modem DSR change */
 376#define C_CM_MRI        0x72            /* modem RI change */
 377#define C_CM_MCTS       0x73            /* modem CTS change */
 378#define C_CM_MRTS       0x74            /* modem RTS drop */
 379#define C_CM_RXBRK      0x84            /* Break received */
 380#define C_CM_PR_ERROR   0x85            /* Parity error */
 381#define C_CM_FR_ERROR   0x86            /* Frame error */
 382#define C_CM_OVR_ERROR  0x87            /* Overrun error */
 383#define C_CM_RXOFL      0x88            /* RX buffer overflow */
 384#define C_CM_CMDERROR   0x90            /* command error */
 385#define C_CM_FATAL      0x91            /* fatal error */
 386#define C_CM_HW_RESET   0x92            /* reset board */
 387
 388/*
 389 *      CH_CTRL - This per port structure contains all parameters
 390 *      that control an specific port. It can be seen as the
 391 *      configuration registers of a "super-serial-controller".
 392 */
 393
 394struct CH_CTRL {
 395        __u32   op_mode;        /* operation mode */
 396        __u32   intr_enable;    /* interrupt masking */
 397        __u32   sw_flow;        /* SW flow control */
 398        __u32   flow_status;    /* output flow status */
 399        __u32   comm_baud;      /* baud rate  - numerically specified */
 400        __u32   comm_parity;    /* parity */
 401        __u32   comm_data_l;    /* data length/stop */
 402        __u32   comm_flags;     /* other flags */
 403        __u32   hw_flow;        /* HW flow control */
 404        __u32   rs_control;     /* RS-232 outputs */
 405        __u32   rs_status;      /* RS-232 inputs */
 406        __u32   flow_xon;       /* xon char */
 407        __u32   flow_xoff;      /* xoff char */
 408        __u32   hw_overflow;    /* hw overflow counter */
 409        __u32   sw_overflow;    /* sw overflow counter */
 410        __u32   comm_error;     /* frame/parity error counter */
 411        __u32 ichar;
 412        __u32 filler[7];
 413};
 414
 415
 416/*
 417 *      BUF_CTRL - This per channel structure contains
 418 *      all Tx and Rx buffer control for a given channel.
 419 */
 420
 421struct  BUF_CTRL        {
 422        __u32   flag_dma;       /* buffers are in Host memory */
 423        __u32   tx_bufaddr;     /* address of the tx buffer */
 424        __u32   tx_bufsize;     /* tx buffer size */
 425        __u32   tx_threshold;   /* tx low water mark */
 426        __u32   tx_get;         /* tail index tx buf */
 427        __u32   tx_put;         /* head index tx buf */
 428        __u32   rx_bufaddr;     /* address of the rx buffer */
 429        __u32   rx_bufsize;     /* rx buffer size */
 430        __u32   rx_threshold;   /* rx high water mark */
 431        __u32   rx_get;         /* tail index rx buf */
 432        __u32   rx_put;         /* head index rx buf */
 433        __u32   filler[5];      /* filler to align structures */
 434};
 435
 436/*
 437 *      BOARD_CTRL - This per board structure contains all global 
 438 *      control fields related to the board.
 439 */
 440
 441struct BOARD_CTRL {
 442
 443        /* static info provided by the on-board CPU */
 444        __u32   n_channel;      /* number of channels */
 445        __u32   fw_version;     /* firmware version */
 446
 447        /* static info provided by the driver */
 448        __u32   op_system;      /* op_system id */
 449        __u32   dr_version;     /* driver version */
 450
 451        /* board control area */
 452        __u32   inactivity;     /* inactivity control */
 453
 454        /* host to FW commands */
 455        __u32   hcmd_channel;   /* channel number */
 456        __u32   hcmd_param;     /* pointer to parameters */
 457
 458        /* FW to Host commands */
 459        __u32   fwcmd_channel;  /* channel number */
 460        __u32   fwcmd_param;    /* pointer to parameters */
 461        __u32   zf_int_queue_addr; /* offset for INT_QUEUE structure */
 462
 463        /* filler so the structures are aligned */
 464        __u32   filler[6];
 465};
 466
 467/* Host Interrupt Queue */
 468
 469#define QUEUE_SIZE      (10*MAX_CHAN)
 470
 471struct  INT_QUEUE {
 472        unsigned char   intr_code[QUEUE_SIZE];
 473        unsigned long   channel[QUEUE_SIZE];
 474        unsigned long   param[QUEUE_SIZE];
 475        unsigned long   put;
 476        unsigned long   get;
 477};
 478
 479/*
 480 *      ZFW_CTRL - This is the data structure that includes all other
 481 *      data structures used by the Firmware.
 482 */
 483 
 484struct ZFW_CTRL {
 485        struct BOARD_CTRL       board_ctrl;
 486        struct CH_CTRL          ch_ctrl[MAX_CHAN];
 487        struct BUF_CTRL         buf_ctrl[MAX_CHAN];
 488};
 489
 490/****************** ****************** *******************/
 491#endif
 492
 493#ifdef __KERNEL__
 494
 495/* Per card data structure */
 496struct cyclades_card {
 497        void __iomem *base_addr;
 498        union {
 499                void __iomem *p9050;
 500                struct RUNTIME_9060 __iomem *p9060;
 501        } ctl_addr;
 502        struct BOARD_CTRL __iomem *board_ctrl;  /* cyz specific */
 503        int irq;
 504        unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
 505        unsigned int first_line;        /* minor number of first channel on card */
 506        unsigned int nports;    /* Number of ports in the card */
 507        int bus_index;          /* address shift - 0 for ISA, 1 for PCI */
 508        int intr_enabled;               /* FW Interrupt flag - 0 disabled, 1 enabled */
 509        u32 hw_ver;
 510        spinlock_t card_lock;
 511        struct cyclades_port *ports;
 512};
 513
 514/***************************************
 515 * Memory access functions/macros      *
 516 * (required to support Alpha systems) *
 517 ***************************************/
 518
 519#define cy_writeb(port,val)     do { writeb((val), (port)); mb(); } while (0)
 520#define cy_writew(port,val)     do { writew((val), (port)); mb(); } while (0)
 521#define cy_writel(port,val)     do { writel((val), (port)); mb(); } while (0)
 522
 523/*
 524 * Statistics counters
 525 */
 526struct cyclades_icount {
 527        __u32   cts, dsr, rng, dcd, tx, rx;
 528        __u32   frame, parity, overrun, brk;
 529        __u32   buf_overrun;
 530};
 531
 532/*
 533 * This is our internal structure for each serial port's state.
 534 * 
 535 * Many fields are paralleled by the structure used by the serial_struct
 536 * structure.
 537 *
 538 * For definitions of the flags field, see tty.h
 539 */
 540
 541struct cyclades_port {
 542        int                     magic;
 543        struct tty_port         port;
 544        struct cyclades_card    *card;
 545        union {
 546                struct {
 547                        void __iomem *base_addr;
 548                } cyy;
 549                struct {
 550                        struct CH_CTRL __iomem  *ch_ctrl;
 551                        struct BUF_CTRL __iomem *buf_ctrl;
 552                } cyz;
 553        } u;
 554        int                     line;
 555        int                     flags;          /* defined in tty.h */
 556        int                     type;           /* UART type */
 557        int                     read_status_mask;
 558        int                     ignore_status_mask;
 559        int                     timeout;
 560        int                     xmit_fifo_size;
 561        int                     cor1,cor2,cor3,cor4,cor5;
 562        int                     tbpr,tco,rbpr,rco;
 563        int                     baud;
 564        int                     rflow;
 565        int                     rtsdtr_inv;
 566        int                     chip_rev;
 567        int                     custom_divisor;
 568        u8                      x_char; /* to be pushed out ASAP */
 569        int                     breakon;
 570        int                     breakoff;
 571        int                     xmit_head;
 572        int                     xmit_tail;
 573        int                     xmit_cnt;
 574        int                     default_threshold;
 575        int                     default_timeout;
 576        unsigned long           rflush_count;
 577        struct cyclades_monitor mon;
 578        struct cyclades_idle_stats      idle_stats;
 579        struct cyclades_icount  icount;
 580        struct completion       shutdown_wait;
 581        int throttle;
 582};
 583
 584#define CLOSING_WAIT_DELAY      30*HZ
 585#define CY_CLOSING_WAIT_NONE    ASYNC_CLOSING_WAIT_NONE
 586#define CY_CLOSING_WAIT_INF     ASYNC_CLOSING_WAIT_INF
 587
 588
 589#define CyMAX_CHIPS_PER_CARD    8
 590#define CyMAX_CHAR_FIFO         12
 591#define CyPORTS_PER_CHIP        4
 592#define CD1400_MAX_SPEED        115200
 593
 594#define CyISA_Ywin      0x2000
 595
 596#define CyPCI_Ywin      0x4000
 597#define CyPCI_Yctl      0x80
 598#define CyPCI_Zctl      CTRL_WINDOW_SIZE
 599#define CyPCI_Zwin      0x80000
 600#define CyPCI_Ze_win    (2 * CyPCI_Zwin)
 601
 602#define PCI_DEVICE_ID_MASK      0x06
 603
 604/**** CD1400 registers ****/
 605
 606#define CD1400_REV_G    0x46
 607#define CD1400_REV_J    0x48
 608
 609#define CyRegSize       0x0400
 610#define Cy_HwReset      0x1400
 611#define Cy_ClrIntr      0x1800
 612#define Cy_EpldRev      0x1e00
 613
 614/* Global Registers */
 615
 616#define CyGFRCR         (0x40*2)
 617#define      CyRevE             (44)
 618#define CyCAR           (0x68*2)
 619#define      CyCHAN_0           (0x00)
 620#define      CyCHAN_1           (0x01)
 621#define      CyCHAN_2           (0x02)
 622#define      CyCHAN_3           (0x03)
 623#define CyGCR           (0x4B*2)
 624#define      CyCH0_SERIAL       (0x00)
 625#define      CyCH0_PARALLEL     (0x80)
 626#define CySVRR          (0x67*2)
 627#define      CySRModem          (0x04)
 628#define      CySRTransmit       (0x02)
 629#define      CySRReceive        (0x01)
 630#define CyRICR          (0x44*2)
 631#define CyTICR          (0x45*2)
 632#define CyMICR          (0x46*2)
 633#define      CyICR0             (0x00)
 634#define      CyICR1             (0x01)
 635#define      CyICR2             (0x02)
 636#define      CyICR3             (0x03)
 637#define CyRIR           (0x6B*2)
 638#define CyTIR           (0x6A*2)
 639#define CyMIR           (0x69*2)
 640#define      CyIRDirEq          (0x80)
 641#define      CyIRBusy           (0x40)
 642#define      CyIRUnfair         (0x20)
 643#define      CyIRContext        (0x1C)
 644#define      CyIRChannel        (0x03)
 645#define CyPPR           (0x7E*2)
 646#define      CyCLOCK_20_1MS     (0x27)
 647#define      CyCLOCK_25_1MS     (0x31)
 648#define      CyCLOCK_25_5MS     (0xf4)
 649#define      CyCLOCK_60_1MS     (0x75)
 650#define      CyCLOCK_60_2MS     (0xea)
 651
 652/* Virtual Registers */
 653
 654#define CyRIVR          (0x43*2)
 655#define CyTIVR          (0x42*2)
 656#define CyMIVR          (0x41*2)
 657#define      CyIVRMask (0x07)
 658#define      CyIVRRxEx (0x07)
 659#define      CyIVRRxOK (0x03)
 660#define      CyIVRTxOK (0x02)
 661#define      CyIVRMdmOK (0x01)
 662#define CyTDR           (0x63*2)
 663#define CyRDSR          (0x62*2)
 664#define      CyTIMEOUT          (0x80)
 665#define      CySPECHAR          (0x70)
 666#define      CyBREAK            (0x08)
 667#define      CyPARITY           (0x04)
 668#define      CyFRAME            (0x02)
 669#define      CyOVERRUN          (0x01)
 670#define CyMISR          (0x4C*2)
 671/* see CyMCOR_ and CyMSVR_ for bits*/
 672#define CyEOSRR         (0x60*2)
 673
 674/* Channel Registers */
 675
 676#define CyLIVR          (0x18*2)
 677#define      CyMscsr            (0x01)
 678#define      CyTdsr             (0x02)
 679#define      CyRgdsr            (0x03)
 680#define      CyRedsr            (0x07)
 681#define CyCCR           (0x05*2)
 682/* Format 1 */
 683#define      CyCHAN_RESET       (0x80)
 684#define      CyCHIP_RESET       (0x81)
 685#define      CyFlushTransFIFO   (0x82)
 686/* Format 2 */
 687#define      CyCOR_CHANGE       (0x40)
 688#define      CyCOR1ch           (0x02)
 689#define      CyCOR2ch           (0x04)
 690#define      CyCOR3ch           (0x08)
 691/* Format 3 */
 692#define      CySEND_SPEC_1      (0x21)
 693#define      CySEND_SPEC_2      (0x22)
 694#define      CySEND_SPEC_3      (0x23)
 695#define      CySEND_SPEC_4      (0x24)
 696/* Format 4 */
 697#define      CyCHAN_CTL         (0x10)
 698#define      CyDIS_RCVR         (0x01)
 699#define      CyENB_RCVR         (0x02)
 700#define      CyDIS_XMTR         (0x04)
 701#define      CyENB_XMTR         (0x08)
 702#define CySRER          (0x06*2)
 703#define      CyMdmCh            (0x80)
 704#define      CyRxData           (0x10)
 705#define      CyTxRdy            (0x04)
 706#define      CyTxMpty           (0x02)
 707#define      CyNNDT             (0x01)
 708#define CyCOR1          (0x08*2)
 709#define      CyPARITY_NONE      (0x00)
 710#define      CyPARITY_0         (0x20)
 711#define      CyPARITY_1         (0xA0)
 712#define      CyPARITY_E         (0x40)
 713#define      CyPARITY_O         (0xC0)
 714#define      Cy_1_STOP          (0x00)
 715#define      Cy_1_5_STOP        (0x04)
 716#define      Cy_2_STOP          (0x08)
 717#define      Cy_5_BITS          (0x00)
 718#define      Cy_6_BITS          (0x01)
 719#define      Cy_7_BITS          (0x02)
 720#define      Cy_8_BITS          (0x03)
 721#define CyCOR2          (0x09*2)
 722#define      CyIXM              (0x80)
 723#define      CyTxIBE            (0x40)
 724#define      CyETC              (0x20)
 725#define      CyAUTO_TXFL        (0x60)
 726#define      CyLLM              (0x10)
 727#define      CyRLM              (0x08)
 728#define      CyRtsAO            (0x04)
 729#define      CyCtsAE            (0x02)
 730#define      CyDsrAE            (0x01)
 731#define CyCOR3          (0x0A*2)
 732#define      CySPL_CH_DRANGE    (0x80)  /* special character detect range */
 733#define      CySPL_CH_DET1      (0x40)  /* enable special character detection
 734                                                               on SCHR4-SCHR3 */
 735#define      CyFL_CTRL_TRNSP    (0x20)  /* Flow Control Transparency */
 736#define      CySPL_CH_DET2      (0x10)  /* Enable special character detection
 737                                                               on SCHR2-SCHR1 */
 738#define      CyREC_FIFO         (0x0F)  /* Receive FIFO threshold */
 739#define CyCOR4          (0x1E*2)
 740#define CyCOR5          (0x1F*2)
 741#define CyCCSR          (0x0B*2)
 742#define      CyRxEN             (0x80)
 743#define      CyRxFloff          (0x40)
 744#define      CyRxFlon           (0x20)
 745#define      CyTxEN             (0x08)
 746#define      CyTxFloff          (0x04)
 747#define      CyTxFlon           (0x02)
 748#define CyRDCR          (0x0E*2)
 749#define CySCHR1         (0x1A*2)
 750#define CySCHR2         (0x1B*2)
 751#define CySCHR3         (0x1C*2)
 752#define CySCHR4         (0x1D*2)
 753#define CySCRL          (0x22*2)
 754#define CySCRH          (0x23*2)
 755#define CyLNC           (0x24*2)
 756#define CyMCOR1         (0x15*2)
 757#define CyMCOR2         (0x16*2)
 758#define CyRTPR          (0x21*2)
 759#define CyMSVR1         (0x6C*2)
 760#define CyMSVR2         (0x6D*2)
 761#define      CyANY_DELTA        (0xF0)
 762#define      CyDSR              (0x80)
 763#define      CyCTS              (0x40)
 764#define      CyRI               (0x20)
 765#define      CyDCD              (0x10)
 766#define      CyDTR              (0x02)
 767#define      CyRTS              (0x01)
 768#define CyPVSR          (0x6F*2)
 769#define CyRBPR          (0x78*2)
 770#define CyRCOR          (0x7C*2)
 771#define CyTBPR          (0x72*2)
 772#define CyTCOR          (0x76*2)
 773
 774/* Custom Registers */
 775
 776#define CyPLX_VER       (0x3400)
 777#define PLX_9050        0x0b
 778#define PLX_9060        0x0c
 779#define PLX_9080        0x0d
 780
 781/***************************************************************************/
 782
 783#endif /* __KERNEL__ */
 784#endif /* _LINUX_CYCLADES_H */
 785
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.