/*
 *  w83627ehf - Driver for the hardware monitoring functionality of
 *              the Winbond W83627EHF Super-I/O chip
 *  Copyright (C) 2005-2011  Jean Delvare <khali@linux-fr.org>
 *  Copyright (C) 2006  Yuan Mu (Winbond),
 *                      Rudolf Marek <r.marek@assembler.cz>
 *                      David Hubbard <david.c.hubbard@gmail.com>
 *                      Daniel J Blueman <daniel.blueman@gmail.com>
 *  Copyright (C) 2010  Sheng-Yuan Huang (Nuvoton) (PS00)
 *
 *  Shamelessly ripped from the w83627hf driver
 *  Copyright (C) 2003  Mark Studebaker
 *
 *  Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help
 *  in testing and debugging this driver.
 *
 *  This driver also supports the W83627EHG, which is the lead-free
 *  version of the W83627EHF.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *  Supports the following chips:
 *
 *  Chip        #vin    #fan    #pwm    #temp  chip IDs       man ID
 *  w83627ehf   10      5       4       3      0x8850 0x88    0x5ca3
 *                                             0x8860 0xa1
 *  w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
 *  w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
 *  w83627uhg    8      2       2       3      0xa230 0xc1    0x5ca3
 *  w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
 *  w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
 *  nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
 *  nct6776f     9      5       3       9      0xC330 0xc1    0x5ca3
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include "lm75.h"

enum kinds {
        w83627ehf, w83627dhg, w83627dhg_p, w83627uhg,
        w83667hg, w83667hg_b, nct6775, nct6776,
};

/* used to set data->name = w83627ehf_device_names[data->sio_kind] */
static const char * const w83627ehf_device_names[] = {
        "w83627ehf",
        "w83627dhg",
        "w83627dhg",
        "w83627uhg",
        "w83667hg",
        "w83667hg",
        "nct6775",
        "nct6776",
};

static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");

static unsigned short fan_debounce;
module_param(fan_debounce, ushort, 0);
MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");

#define DRVNAME "w83627ehf"

/*
 * Super-I/O constants and functions
 */

#define W83627EHF_LD_HWM        0x0b
#define W83667HG_LD_VID         0x0d

#define SIO_REG_LDSEL           0x07    /* Logical device select */
#define SIO_REG_DEVID           0x20    /* Device ID (2 bytes) */
#define SIO_REG_EN_VRM10        0x2C    /* GPIO3, GPIO4 selection */
#define SIO_REG_ENABLE          0x30    /* Logical device enable */
#define SIO_REG_ADDR            0x60    /* Logical device address (2 bytes) */
#define SIO_REG_VID_CTRL        0xF0    /* VID control */
#define SIO_REG_VID_DATA        0xF1    /* VID data */

#define SIO_W83627EHF_ID        0x8850
#define SIO_W83627EHG_ID        0x8860
#define SIO_W83627DHG_ID        0xa020
#define SIO_W83627DHG_P_ID      0xb070
#define SIO_W83627UHG_ID        0xa230
#define SIO_W83667HG_ID         0xa510
#define SIO_W83667HG_B_ID       0xb350
#define SIO_NCT6775_ID          0xb470
#define SIO_NCT6776_ID          0xc330
#define SIO_ID_MASK             0xFFF0

static inline void
superio_outb(int ioreg, int reg, int val)
{
        outb(reg, ioreg);
        outb(val, ioreg + 1);
}

static inline int
superio_inb(int ioreg, int reg)
{
        outb(reg, ioreg);
        return inb(ioreg + 1);
}

static inline void
superio_select(int ioreg, int ld)
{
        outb(SIO_REG_LDSEL, ioreg);
        outb(ld, ioreg + 1);
}

static inline void
superio_enter(int ioreg)
{
        outb(0x87, ioreg);
        outb(0x87, ioreg);
}

static inline void
superio_exit(int ioreg)
{
        outb(0xaa, ioreg);
        outb(0x02, ioreg);
        outb(0x02, ioreg + 1);
}

/*
 * ISA constants
 */

#define IOREGION_ALIGNMENT      (~7)
#define IOREGION_OFFSET         5
#define IOREGION_LENGTH         2
#define ADDR_REG_OFFSET         0
#define DATA_REG_OFFSET         1

#define W83627EHF_REG_BANK              0x4E
#define W83627EHF_REG_CONFIG            0x40

/*
 * Not currently used:
 * REG_MAN_ID has the value 0x5ca3 for all supported chips.
 * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
 * REG_MAN_ID is at port 0x4f
 * REG_CHIP_ID is at port 0x58
 */

static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };

/* The W83627EHF registers for nr=7,8,9 are in bank 5 */
#define W83627EHF_REG_IN_MAX(nr)        ((nr < 7) ? (0x2b + (nr) * 2) : \
                                         (0x554 + (((nr) - 7) * 2)))
#define W83627EHF_REG_IN_MIN(nr)        ((nr < 7) ? (0x2c + (nr) * 2) : \
                                         (0x555 + (((nr) - 7) * 2)))
#define W83627EHF_REG_IN(nr)            ((nr < 7) ? (0x20 + (nr)) : \
                                         (0x550 + (nr) - 7))

static const u16 W83627EHF_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x7e };
static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0 };
static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0 };
static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 };

/* Fan clock dividers are spread over the following five registers */
#define W83627EHF_REG_FANDIV1           0x47
#define W83627EHF_REG_FANDIV2           0x4B
#define W83627EHF_REG_VBAT              0x5D
#define W83627EHF_REG_DIODE             0x59
#define W83627EHF_REG_SMI_OVT           0x4C

/* NCT6775F has its own fan divider registers */
#define NCT6775_REG_FANDIV1             0x506
#define NCT6775_REG_FANDIV2             0x507
#define NCT6775_REG_FAN_DEBOUNCE        0xf0

#define W83627EHF_REG_ALARM1            0x459
#define W83627EHF_REG_ALARM2            0x45A
#define W83627EHF_REG_ALARM3            0x45B

#define W83627EHF_REG_CASEOPEN_DET      0x42 /* SMI STATUS #2 */
#define W83627EHF_REG_CASEOPEN_CLR      0x46 /* SMI MASK #3 */

/* SmartFan registers */
#define W83627EHF_REG_FAN_STEPUP_TIME 0x0f
#define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e

/* DC or PWM output fan configuration */
static const u8 W83627EHF_REG_PWM_ENABLE[] = {
        0x04,                   /* SYS FAN0 output mode and PWM mode */
        0x04,                   /* CPU FAN0 output mode and PWM mode */
        0x12,                   /* AUX FAN mode */
        0x62,                   /* CPU FAN1 mode */
};

static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 };
static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 };

/* FAN Duty Cycle, be used to control */
static const u16 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 };
static const u16 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 };
static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 };

/* Advanced Fan control, some values are common for all fans */
static const u16 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 };
static const u16 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 };
static const u16 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 };

static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[]
                                                = { 0xff, 0x67, 0xff, 0x69 };
static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[]
                                                = { 0xff, 0x68, 0xff, 0x6a };

static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b };
static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[]
                                                = { 0x68, 0x6a, 0x6c };

static const u16 W83627EHF_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 };

static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301 };
static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302 };
static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305 };
static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { 0x106, 0x206, 0x306 };
static const u16 NCT6775_REG_FAN_STOP_TIME[] = { 0x107, 0x207, 0x307 };
static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309 };
static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a };
static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b };
static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 };
static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642};

static const u16 NCT6775_REG_TEMP[]
        = { 0x27, 0x150, 0x250, 0x73, 0x75, 0x77, 0x62b, 0x62c, 0x62d };
static const u16 NCT6775_REG_TEMP_CONFIG[]
        = { 0, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A };
static const u16 NCT6775_REG_TEMP_HYST[]
        = { 0x3a, 0x153, 0x253, 0, 0, 0, 0x673, 0x678, 0x67D };
static const u16 NCT6775_REG_TEMP_OVER[]
        = { 0x39, 0x155, 0x255, 0, 0, 0, 0x672, 0x677, 0x67C };
static const u16 NCT6775_REG_TEMP_SOURCE[]
        = { 0x621, 0x622, 0x623, 0x100, 0x200, 0x300, 0x624, 0x625, 0x626 };

static const char *const w83667hg_b_temp_label[] = {
        "SYSTIN",
        "CPUTIN",
        "AUXTIN",
        "AMDTSI",
        "PECI Agent 1",
        "PECI Agent 2",
        "PECI Agent 3",
        "PECI Agent 4"
};

static const char *const nct6775_temp_label[] = {
        "",
        "SYSTIN",
        "CPUTIN",
        "AUXTIN",
        "AMD SB-TSI",
        "PECI Agent 0",
        "PECI Agent 1",
        "PECI Agent 2",
        "PECI Agent 3",
        "PECI Agent 4",
        "PECI Agent 5",
        "PECI Agent 6",
        "PECI Agent 7",
        "PCH_CHIP_CPU_MAX_TEMP",
        "PCH_CHIP_TEMP",
        "PCH_CPU_TEMP",
        "PCH_MCH_TEMP",
        "PCH_DIM0_TEMP",
        "PCH_DIM1_TEMP",
        "PCH_DIM2_TEMP",
        "PCH_DIM3_TEMP"
};

static const char *const nct6776_temp_label[] = {
        "",
        "SYSTIN",
        "CPUTIN",
        "AUXTIN",
        "SMBUSMASTER 0",
        "SMBUSMASTER 1",
        "SMBUSMASTER 2",
        "SMBUSMASTER 3",
        "SMBUSMASTER 4",
        "SMBUSMASTER 5",
        "SMBUSMASTER 6",
        "SMBUSMASTER 7",
        "PECI Agent 0",
        "PECI Agent 1",
        "PCH_CHIP_CPU_MAX_TEMP",
        "PCH_CHIP_TEMP",
        "PCH_CPU_TEMP",
        "PCH_MCH_TEMP",
        "PCH_DIM0_TEMP",
        "PCH_DIM1_TEMP",
        "PCH_DIM2_TEMP",
        "PCH_DIM3_TEMP",
        "BYTE_TEMP"
};

#define NUM_REG_TEMP    ARRAY_SIZE(NCT6775_REG_TEMP)

static int is_word_sized(u16 reg)
{
        return ((((reg & 0xff00) == 0x100
              || (reg & 0xff00) == 0x200)
             && ((reg & 0x00ff) == 0x50
              || (reg & 0x00ff) == 0x53
              || (reg & 0x00ff) == 0x55))
             || (reg & 0xfff0) == 0x630
             || reg == 0x640 || reg == 0x642
             || ((reg & 0xfff0) == 0x650
                 && (reg & 0x000f) >= 0x06)
             || reg == 0x73 || reg == 0x75 || reg == 0x77
                );
}

/*
 * Conversions
 */

/* 1 is PWM mode, output in ms */
static inline unsigned int step_time_from_reg(u8 reg, u8 mode)
{
        return mode ? 100 * reg : 400 * reg;
}

static inline u8 step_time_to_reg(unsigned int msec, u8 mode)
{
        return SENSORS_LIMIT((mode ? (msec + 50) / 100 :
                                                (msec + 200) / 400), 1, 255);
}

static unsigned int fan_from_reg8(u16 reg, unsigned int divreg)
{
        if (reg == 0 || reg == 255)
                return 0;
        return 1350000U / (reg << divreg);
}

static unsigned int fan_from_reg13(u16 reg, unsigned int divreg)
{
        if ((reg & 0xff1f) == 0xff1f)
                return 0;

        reg = (reg & 0x1f) | ((reg & 0xff00) >> 3);

        if (reg == 0)
                return 0;

        return 1350000U / reg;
}

static unsigned int fan_from_reg16(u16 reg, unsigned int divreg)
{
        if (reg == 0 || reg == 0xffff)
                return 0;

        /*
         * Even though the registers are 16 bit wide, the fan divisor
         * still applies.
         */
        return 1350000U / (reg << divreg);
}

static inline unsigned int
div_from_reg(u8 reg)
{
        return 1 << reg;
}

/*
 * Some of the voltage inputs have internal scaling, the tables below
 * contain 8 (the ADC LSB in mV) * scaling factor * 100
 */
static const u16 scale_in_common[10] = {
        800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800
};
static const u16 scale_in_w83627uhg[9] = {
        800, 800, 3328, 3424, 800, 800, 0, 3328, 3400
};

static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in)
{
        return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100);
}

static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
{
        return SENSORS_LIMIT(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0,
                             255);
}

/*
 * Data structures and manipulation thereof
 */

struct w83627ehf_data {
        int addr;       /* IO base of hw monitor block */
        const char *name;

        struct device *hwmon_dev;
        struct mutex lock;

        u16 reg_temp[NUM_REG_TEMP];
        u16 reg_temp_over[NUM_REG_TEMP];
        u16 reg_temp_hyst[NUM_REG_TEMP];
        u16 reg_temp_config[NUM_REG_TEMP];
        u8 temp_src[NUM_REG_TEMP];
        const char * const *temp_label;

        const u16 *REG_PWM;
        const u16 *REG_TARGET;
        const u16 *REG_FAN;
        const u16 *REG_FAN_MIN;
        const u16 *REG_FAN_START_OUTPUT;
        const u16 *REG_FAN_STOP_OUTPUT;
        const u16 *REG_FAN_STOP_TIME;
        const u16 *REG_FAN_MAX_OUTPUT;
        const u16 *REG_FAN_STEP_OUTPUT;
        const u16 *scale_in;

        unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
        unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);

        struct mutex update_lock;
        char valid;             /* !=0 if following fields are valid */
        unsigned long last_updated;     /* In jiffies */

        /* Register values */
        u8 bank;                /* current register bank */
        u8 in_num;              /* number of in inputs we have */
        u8 in[10];              /* Register value */
        u8 in_max[10];          /* Register value */
        u8 in_min[10];          /* Register value */
        unsigned int rpm[5];
        u16 fan_min[5];
        u8 fan_div[5];
        u8 has_fan;             /* some fan inputs can be disabled */
        u8 has_fan_min;         /* some fans don't have min register */
        bool has_fan_div;
        u8 temp_type[3];
        s8 temp_offset[3];
        s16 temp[9];
        s16 temp_max[9];
        s16 temp_max_hyst[9];
        u32 alarms;
        u8 caseopen;

        u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */
        u8 pwm_enable[4]; /* 1->manual
                           * 2->thermal cruise mode (also called SmartFan I)
                           * 3->fan speed cruise mode
                           * 4->variable thermal cruise (also called
                           * SmartFan III)
                           * 5->enhanced variable thermal cruise (also called
                           * SmartFan IV)
                           */
        u8 pwm_enable_orig[4];  /* original value of pwm_enable */
        u8 pwm_num;             /* number of pwm */
        u8 pwm[4];
        u8 target_temp[4];
        u8 tolerance[4];

        u8 fan_start_output[4]; /* minimum fan speed when spinning up */
        u8 fan_stop_output[4]; /* minimum fan speed when spinning down */
        u8 fan_stop_time[4]; /* time at minimum before disabling fan */
        u8 fan_max_output[4]; /* maximum fan speed */
        u8 fan_step_output[4]; /* rate of change output value */

        u8 vid;
        u8 vrm;

        u16 have_temp;
        u16 have_temp_offset;
        u8 in6_skip:1;
        u8 temp3_val_only:1;
};

struct w83627ehf_sio_data {
        int sioreg;
        enum kinds kind;
};

/*
 * On older chips, only registers 0x50-0x5f are banked.
 * On more recent chips, all registers are banked.
 * Assume that is the case and set the bank number for each access.
 * Cache the bank number so it only needs to be set if it changes.
 */
static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg)
{
        u8 bank = reg >> 8;
        if (data->bank != bank) {
                outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
                outb_p(bank, data->addr + DATA_REG_OFFSET);
                data->bank = bank;
        }
}

static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg)
{
        int res, word_sized = is_word_sized(reg);

        mutex_lock(&data->lock);

        w83627ehf_set_bank(data, reg);
        outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
        res = inb_p(data->addr + DATA_REG_OFFSET);
        if (word_sized) {
                outb_p((reg & 0xff) + 1,
                       data->addr + ADDR_REG_OFFSET);
                res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET);
        }

        mutex_unlock(&data->lock);
        return res;
}

static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg,
                                 u16 value)
{
        int word_sized = is_word_sized(reg);

        mutex_lock(&data->lock);

        w83627ehf_set_bank(data, reg);
        outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
        if (word_sized) {
                outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
                outb_p((reg & 0xff) + 1,
                       data->addr + ADDR_REG_OFFSET);
        }
        outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);

        mutex_unlock(&data->lock);
        return 0;
}

/* We left-align 8-bit temperature values to make the code simpler */
static u16 w83627ehf_read_temp(struct w83627ehf_data *data, u16 reg)
{
        u16 res;

        res = w83627ehf_read_value(data, reg);
        if (!is_word_sized(reg))
                res <<= 8;

        return res;
}

static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg,
                                       u16 value)
{
        if (!is_word_sized(reg))
                value >>= 8;
        return w83627ehf_write_value(data, reg, value);
}

/* This function assumes that the caller holds data->update_lock */
static void nct6775_write_fan_div(struct w83627ehf_data *data, int nr)
{
        u8 reg;

        switch (nr) {
        case 0:
                reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x70)
                    | (data->fan_div[0] & 0x7);
                w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg);
                break;
        case 1:
                reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x7)
                    | ((data->fan_div[1] << 4) & 0x70);
                w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg);
                break;
        case 2:
                reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x70)
                    | (data->fan_div[2] & 0x7);
                w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg);
                break;
        case 3:
                reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x7)
                    | ((data->fan_div[3] << 4) & 0x70);
                w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg);
                break;
        }
}

/* This function assumes that the caller holds data->update_lock */
static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
{
        u8 reg;

        switch (nr) {
        case 0:
                reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf)
                    | ((data->fan_div[0] & 0x03) << 4);
                /* fan5 input control bit is write only, compute the value */
                reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
                w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
                reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf)
                    | ((data->fan_div[0] & 0x04) << 3);
                w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
                break;
        case 1:
                reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f)
                    | ((data->fan_div[1] & 0x03) << 6);
                /* fan5 input control bit is write only, compute the value */
                reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
                w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
                reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf)
                    | ((data->fan_div[1] & 0x04) << 4);
                w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
                break;
        case 2:
                reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f)
                    | ((data->fan_div[2] & 0x03) << 6);
                w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg);
                reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f)
                    | ((data->fan_div[2] & 0x04) << 5);
                w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
                break;
        case 3:
                reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc)
                    | (data->fan_div[3] & 0x03);
                w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
                reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f)
                    | ((data->fan_div[3] & 0x04) << 5);
                w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg);
                break;
        case 4:
                reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73)
                    | ((data->fan_div[4] & 0x03) << 2)
                    | ((data->fan_div[4] & 0x04) << 5);
                w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
                break;
        }
}

static void w83627ehf_write_fan_div_common(struct device *dev,
                                           struct w83627ehf_data *data, int nr)
{
        struct w83627ehf_sio_data *sio_data = dev->platform_data;

        if (sio_data->kind == nct6776)
                ; /* no dividers, do nothing */
        else if (sio_data->kind == nct6775)
                nct6775_write_fan_div(data, nr);
        else
                w83627ehf_write_fan_div(data, nr);
}

static void nct6775_update_fan_div(struct w83627ehf_data *data)
{
        u8 i;

        i = w83627ehf_read_value(data, NCT6775_REG_FANDIV1);
        data->fan_div[0] = i & 0x7;
        data->fan_div[1] = (i & 0x70) >> 4;
        i = w83627ehf_read_value(data, NCT6775_REG_FANDIV2);
        data->fan_div[2] = i & 0x7;
        if (data->has_fan & (1<<3))
                data->fan_div[3] = (i & 0x70) >> 4;
}

static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
{
        int i;

        i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
        data->fan_div[0] = (i >> 4) & 0x03;
        data->fan_div[1] = (i >> 6) & 0x03;
        i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
        data->fan_div[2] = (i >> 6) & 0x03;
        i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
        data->fan_div[0] |= (i >> 3) & 0x04;
        data->fan_div[1] |= (i >> 4) & 0x04;
        data->fan_div[2] |= (i >> 5) & 0x04;
        if (data->has_fan & ((1 << 3) | (1 << 4))) {
                i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
                data->fan_div[3] = i & 0x03;
                data->fan_div[4] = ((i >> 2) & 0x03)
                                 | ((i >> 5) & 0x04);
        }
        if (data->has_fan & (1 << 3)) {
                i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
                data->fan_div[3] |= (i >> 5) & 0x04;
        }
}

static void w83627ehf_update_fan_div_common(struct device *dev,
                                            struct w83627ehf_data *data)
{
        struct w83627ehf_sio_data *sio_data = dev->platform_data;

        if (sio_data->kind == nct6776)
                ; /* no dividers, do nothing */
        else if (sio_data->kind == nct6775)
                nct6775_update_fan_div(data);
        else
                w83627ehf_update_fan_div(data);
}

static void nct6775_update_pwm(struct w83627ehf_data *data)
{
        int i;
        int pwmcfg, fanmodecfg;

        for (i = 0; i < data->pwm_num; i++) {
                pwmcfg = w83627ehf_read_value(data,
                                              W83627EHF_REG_PWM_ENABLE[i]);
                fanmodecfg = w83627ehf_read_value(data,
                                                  NCT6775_REG_FAN_MODE[i]);
                data->pwm_mode[i] =
                  ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
                data->pwm_enable[i] = ((fanmodecfg >> 4) & 7) + 1;
                data->tolerance[i] = fanmodecfg & 0x0f;
                data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);
        }
}

static void w83627ehf_update_pwm(struct w83627ehf_data *data)
{
        int i;
        int pwmcfg = 0, tolerance = 0; /* shut up the compiler */

        for (i = 0; i < data->pwm_num; i++) {
                if (!(data->has_fan & (1 << i)))
                        continue;

                /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */
                if (i != 1) {
                        pwmcfg = w83627ehf_read_value(data,
                                        W83627EHF_REG_PWM_ENABLE[i]);
                        tolerance = w83627ehf_read_value(data,
                                        W83627EHF_REG_TOLERANCE[i]);
                }
                data->pwm_mode[i] =
                        ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
                data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
                                       & 3) + 1;
                data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);

                data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f;
        }
}

static void w83627ehf_update_pwm_common(struct device *dev,
                                        struct w83627ehf_data *data)
{
        struct w83627ehf_sio_data *sio_data = dev->platform_data;

        if (sio_data->kind == nct6775 || sio_data->kind == nct6776)
                nct6775_update_pwm(data);
        else
                w83627ehf_update_pwm(data);
}

static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct w83627ehf_sio_data *sio_data = dev->platform_data;

        int i;

        mutex_lock(&data->update_lock);

        if (time_after(jiffies, data->last_updated + HZ + HZ/2)
         || !data->valid) {
                /* Fan clock dividers */
                w83627ehf_update_fan_div_common(dev, data);

                /* Measured voltages and limits */
                for (i = 0; i < data->in_num; i++) {
                        if ((i == 6) && data->in6_skip)
                                continue;

                        data->in[i] = w83627ehf_read_value(data,
                                      W83627EHF_REG_IN(i));
                        data->in_min[i] = w83627ehf_read_value(data,
                                          W83627EHF_REG_IN_MIN(i));
                        data->in_max[i] = w83627ehf_read_value(data,
                                          W83627EHF_REG_IN_MAX(i));
                }

                /* Measured fan speeds and limits */
                for (i = 0; i < 5; i++) {
                        u16 reg;

                        if (!(data->has_fan & (1 << i)))
                                continue;

                        reg = w83627ehf_read_value(data, data->REG_FAN[i]);
                        data->rpm[i] = data->fan_from_reg(reg,
                                                          data->fan_div[i]);

                        if (data->has_fan_min & (1 << i))
                                data->fan_min[i] = w83627ehf_read_value(data,
                                           data->REG_FAN_MIN[i]);

                        /*
                         * If we failed to measure the fan speed and clock
                         * divider can be increased, let's try that for next
                         * time
                         */
                        if (data->has_fan_div
                            && (reg >= 0xff || (sio_data->kind == nct6775
                                                && reg == 0x00))
                            && data->fan_div[i] < 0x07) {
                                dev_dbg(dev, "Increasing fan%d "
                                        "clock divider from %u to %u\n",
                                        i + 1, div_from_reg(data->fan_div[i]),
                                        div_from_reg(data->fan_div[i] + 1));
                                data->fan_div[i]++;
                                w83627ehf_write_fan_div_common(dev, data, i);
                                /* Preserve min limit if possible */
                                if ((data->has_fan_min & (1 << i))
                                 && data->fan_min[i] >= 2
                                 && data->fan_min[i] != 255)
                                        w83627ehf_write_value(data,
                                                data->REG_FAN_MIN[i],
                                                (data->fan_min[i] /= 2));
                        }
                }

                w83627ehf_update_pwm_common(dev, data);

                for (i = 0; i < data->pwm_num; i++) {
                        if (!(data->has_fan & (1 << i)))
                                continue;

                        data->fan_start_output[i] =
                          w83627ehf_read_value(data,
                                               data->REG_FAN_START_OUTPUT[i]);
                        data->fan_stop_output[i] =
                          w83627ehf_read_value(data,
                                               data->REG_FAN_STOP_OUTPUT[i]);
                        data->fan_stop_time[i] =
                          w83627ehf_read_value(data,
                                               data->REG_FAN_STOP_TIME[i]);

                        if (data->REG_FAN_MAX_OUTPUT &&
                            data->REG_FAN_MAX_OUTPUT[i] != 0xff)
                                data->fan_max_output[i] =
                                  w83627ehf_read_value(data,
                                                data->REG_FAN_MAX_OUTPUT[i]);

                        if (data->REG_FAN_STEP_OUTPUT &&
                            data->REG_FAN_STEP_OUTPUT[i] != 0xff)
                                data->fan_step_output[i] =
                                  w83627ehf_read_value(data,
                                                data->REG_FAN_STEP_OUTPUT[i]);

                        data->target_temp[i] =
                                w83627ehf_read_value(data,
                                        data->REG_TARGET[i]) &
                                        (data->pwm_mode[i] == 1 ? 0x7f : 0xff);
                }

                /* Measured temperatures and limits */
                for (i = 0; i < NUM_REG_TEMP; i++) {
                        if (!(data->have_temp & (1 << i)))
                                continue;
                        data->temp[i] = w83627ehf_read_temp(data,
                                                data->reg_temp[i]);
                        if (data->reg_temp_over[i])
                                data->temp_max[i]
                                  = w83627ehf_read_temp(data,
                                                data->reg_temp_over[i]);
                        if (data->reg_temp_hyst[i])
                                data->temp_max_hyst[i]
                                  = w83627ehf_read_temp(data,
                                                data->reg_temp_hyst[i]);
                        if (data->have_temp_offset & (1 << i))
                                data->temp_offset[i]
                                  = w83627ehf_read_value(data,
                                                W83627EHF_REG_TEMP_OFFSET[i]);
                }

                data->alarms = w83627ehf_read_value(data,
                                        W83627EHF_REG_ALARM1) |
                               (w83627ehf_read_value(data,
                                        W83627EHF_REG_ALARM2) << 8) |
                               (w83627ehf_read_value(data,
                                        W83627EHF_REG_ALARM3) << 16);

                data->caseopen = w83627ehf_read_value(data,
                                                W83627EHF_REG_CASEOPEN_DET);

                data->last_updated = jiffies;
                data->valid = 1;
        }

        mutex_unlock(&data->update_lock);
        return data;
}

/*
 * Sysfs callback functions
 */
#define show_in_reg(reg) \
static ssize_t \
show_##reg(struct device *dev, struct device_attribute *attr, \
           char *buf) \
{ \
        struct w83627ehf_data *data = w83627ehf_update_device(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr, \
                       data->scale_in)); \
}
show_in_reg(in)
show_in_reg(in_min)
show_in_reg(in_max)

#define store_in_reg(REG, reg) \
static ssize_t \
store_in_##reg(struct device *dev, struct device_attribute *attr, \
               const char *buf, size_t count) \
{ \
        struct w83627ehf_data *data = dev_get_drvdata(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        unsigned long val; \
        int err; \
        err = kstrtoul(buf, 10, &val); \
        if (err < 0) \
                return err; \
        mutex_lock(&data->update_lock); \
        data->in_##reg[nr] = in_to_reg(val, nr, data->scale_in); \
        w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
                              data->in_##reg[nr]); \
        mutex_unlock(&data->update_lock); \
        return count; \
}

store_in_reg(MIN, min)
store_in_reg(MAX, max)

static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
                          char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        return sprintf(buf, "%u\n", (data->alarms >> nr) & 0x01);
}

static struct sensor_device_attribute sda_in_input[] = {
        SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
        SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
        SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
        SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
        SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
        SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
        SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
        SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
        SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
        SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9),
};

static struct sensor_device_attribute sda_in_alarm[] = {
        SENSOR_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0),
        SENSOR_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1),
        SENSOR_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2),
        SENSOR_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3),
        SENSOR_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8),
        SENSOR_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 21),
        SENSOR_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 20),
        SENSOR_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16),
        SENSOR_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17),

        SENSOR_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 19),
};

static struct sensor_device_attribute sda_in_min[] = {
        SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
        SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
        SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
        SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
        SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
        SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
        SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
        SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
        SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
        SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9),
};

static struct sensor_device_attribute sda_in_max[] = {
        SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
        SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
        SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
        SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
        SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
        SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
        SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
        SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
        SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
        SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
};

static ssize_t
show_fan(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        return sprintf(buf, "%d\n", data->rpm[nr]);
}

static ssize_t
show_fan_min(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        return sprintf(buf, "%d\n",
                       data->fan_from_reg_min(data->fan_min[nr],
                                              data->fan_div[nr]));
}

static ssize_t
show_fan_div(struct device *dev, struct device_attribute *attr,
             char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
}

static ssize_t
store_fan_min(struct device *dev, struct device_attribute *attr,
              const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        unsigned long val;
        int err;
        unsigned int reg;
        u8 new_div;

        err = kstrtoul(buf, 10, &val);
        if (err < 0)
                return err;

        mutex_lock(&data->update_lock);
        if (!data->has_fan_div) {
                /*
                 * Only NCT6776F for now, so we know that this is a 13 bit
                 * register
                 */
                if (!val) {
                        val = 0xff1f;
                } else {
                        if (val > 1350000U)
                                val = 135000U;
                        val = 1350000U / val;
                        val = (val & 0x1f) | ((val << 3) & 0xff00);
                }
                data->fan_min[nr] = val;
                goto done;      /* Leave fan divider alone */
        }
        if (!val) {
                /* No min limit, alarm disabled */
                data->fan_min[nr] = 255;
                new_div = data->fan_div[nr]; /* No change */
                dev_info(dev, "fan%u low limit and alarm disabled\n", nr + 1);
        } else if ((reg = 1350000U / val) >= 128 * 255) {
                /*
                 * Speed below this value cannot possibly be represented,
                 * even with the highest divider (128)
                 */
                data->fan_min[nr] = 254;
                new_div = 7; /* 128 == (1 << 7) */
                dev_warn(dev, "fan%u low limit %lu below minimum %u, set to "
                         "minimum\n", nr + 1, val,
                         data->fan_from_reg_min(254, 7));
        } else if (!reg) {
                /*
                 * Speed above this value cannot possibly be represented,
                 * even with the lowest divider (1)
                 */
                data->fan_min[nr] = 1;
                new_div = 0; /* 1 == (1 << 0) */
                dev_warn(dev, "fan%u low limit %lu above maximum %u, set to "
                         "maximum\n", nr + 1, val,
                         data->fan_from_reg_min(1, 0));
        } else {
                /*
                 * Automatically pick the best divider, i.e. the one such
                 * that the min limit will correspond to a register value
                 * in the 96..192 range
                 */
                new_div = 0;
                while (reg > 192 && new_div < 7) {
                        reg >>= 1;
                        new_div++;
                }
                data->fan_min[nr] = reg;
        }

        /*
         * Write both the fan clock divider (if it changed) and the new
         * fan min (unconditionally)
         */
        if (new_div != data->fan_div[nr]) {
                dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
                        nr + 1, div_from_reg(data->fan_div[nr]),
                        div_from_reg(new_div));
                data->fan_div[nr] = new_div;
                w83627ehf_write_fan_div_common(dev, data, nr);
                /* Give the chip time to sample a new speed value */
                data->last_updated = jiffies;
        }
done:
        w83627ehf_write_value(data, data->REG_FAN_MIN[nr],
                              data->fan_min[nr]);
        mutex_unlock(&data->update_lock);

        return count;
}

static struct sensor_device_attribute sda_fan_input[] = {
        SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
        SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
        SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
        SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
        SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4),
};

static struct sensor_device_attribute sda_fan_alarm[] = {
        SENSOR_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6),
        SENSOR_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7),
        SENSOR_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11),
        SENSOR_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 10),
        SENSOR_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 23),
};

static struct sensor_device_attribute sda_fan_min[] = {
        SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
                    store_fan_min, 0),
        SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
                    store_fan_min, 1),
        SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
                    store_fan_min, 2),
        SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
                    store_fan_min, 3),
        SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min,
                    store_fan_min, 4),
};

static struct sensor_device_attribute sda_fan_div[] = {
        SENSOR_ATTR(fan1_div, S_IRUGO, show_fan_div, NULL, 0),
        SENSOR_ATTR(fan2_div, S_IRUGO, show_fan_div, NULL, 1),
        SENSOR_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2),
        SENSOR_ATTR(fan4_div, S_IRUGO, show_fan_div, NULL, 3),
        SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4),
};

static ssize_t
show_temp_label(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]);
}

#define show_temp_reg(addr, reg) \
static ssize_t \
show_##reg(struct device *dev, struct device_attribute *attr, \
           char *buf) \
{ \
        struct w83627ehf_data *data = w83627ehf_update_device(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        return sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(data->reg[nr])); \
}
show_temp_reg(reg_temp, temp);
show_temp_reg(reg_temp_over, temp_max);
show_temp_reg(reg_temp_hyst, temp_max_hyst);

#define store_temp_reg(addr, reg) \
static ssize_t \
store_##reg(struct device *dev, struct device_attribute *attr, \
            const char *buf, size_t count) \
{ \
        struct w83627ehf_data *data = dev_get_drvdata(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        int err; \
        long val; \
        err = kstrtol(buf, 10, &val); \
        if (err < 0) \
                return err; \
        mutex_lock(&data->update_lock); \
        data->reg[nr] = LM75_TEMP_TO_REG(val); \
        w83627ehf_write_temp(data, data->addr[nr], data->reg[nr]); \
        mutex_unlock(&data->update_lock); \
        return count; \
}
store_temp_reg(reg_temp_over, temp_max);
store_temp_reg(reg_temp_hyst, temp_max_hyst);

static ssize_t
show_temp_offset(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);

        return sprintf(buf, "%d\n",
                       data->temp_offset[sensor_attr->index] * 1000);
}

static ssize_t
store_temp_offset(struct device *dev, struct device_attribute *attr,
                  const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        long val;
        int err;

        err = kstrtol(buf, 10, &val);
        if (err < 0)
                return err;

        val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), -128, 127);

        mutex_lock(&data->update_lock);
        data->temp_offset[nr] = val;
        w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[nr], val);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t
show_temp_type(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        return sprintf(buf, "%d\n", (int)data->temp_type[nr]);
}

static struct sensor_device_attribute sda_temp_input[] = {
        SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
        SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
        SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
        SENSOR_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3),
        SENSOR_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4),
        SENSOR_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5),
        SENSOR_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6),
        SENSOR_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7),
        SENSOR_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8),
};

static struct sensor_device_attribute sda_temp_label[] = {
        SENSOR_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0),
        SENSOR_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1),
        SENSOR_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2),
        SENSOR_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3),
        SENSOR_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4),
        SENSOR_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5),
        SENSOR_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6),
        SENSOR_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7),
        SENSOR_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8),
};

static struct sensor_device_attribute sda_temp_max[] = {
        SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 0),
        SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 1),
        SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 2),
        SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 3),
        SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 4),
        SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 5),
        SENSOR_ATTR(temp7_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 6),
        SENSOR_ATTR(temp8_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 7),
        SENSOR_ATTR(temp9_max, S_IRUGO | S_IWUSR, show_temp_max,
                    store_temp_max, 8),
};

static struct sensor_device_attribute sda_temp_max_hyst[] = {
        SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 0),
        SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 1),
        SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 2),
        SENSOR_ATTR(temp4_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 3),
        SENSOR_ATTR(temp5_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 4),
        SENSOR_ATTR(temp6_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 5),
        SENSOR_ATTR(temp7_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 6),
        SENSOR_ATTR(temp8_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 7),
        SENSOR_ATTR(temp9_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
                    store_temp_max_hyst, 8),
};

static struct sensor_device_attribute sda_temp_alarm[] = {
        SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4),
        SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5),
        SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13),
};

static struct sensor_device_attribute sda_temp_type[] = {
        SENSOR_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0),
        SENSOR_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1),
        SENSOR_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2),
};

static struct sensor_device_attribute sda_temp_offset[] = {
        SENSOR_ATTR(temp1_offset, S_IRUGO | S_IWUSR, show_temp_offset,
                    store_temp_offset, 0),
        SENSOR_ATTR(temp2_offset, S_IRUGO | S_IWUSR, show_temp_offset,
                    store_temp_offset, 1),
        SENSOR_ATTR(temp3_offset, S_IRUGO | S_IWUSR, show_temp_offset,
                    store_temp_offset, 2),
};

#define show_pwm_reg(reg) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
                          char *buf) \
{ \
        struct w83627ehf_data *data = w83627ehf_update_device(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        return sprintf(buf, "%d\n", data->reg[nr]); \
}

show_pwm_reg(pwm_mode)
show_pwm_reg(pwm_enable)
show_pwm_reg(pwm)

static ssize_t
store_pwm_mode(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        struct w83627ehf_sio_data *sio_data = dev->platform_data;
        int nr = sensor_attr->index;
        unsigned long val;
        int err;
        u16 reg;

        err = kstrtoul(buf, 10, &val);
        if (err < 0)
                return err;

        if (val > 1)
                return -EINVAL;

        /* On NCT67766F, DC mode is only supported for pwm1 */
        if (sio_data->kind == nct6776 && nr && val != 1)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
        data->pwm_mode[nr] = val;
        reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[nr]);
        if (!val)
                reg |= 1 << W83627EHF_PWM_MODE_SHIFT[nr];
        w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t
store_pwm(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        unsigned long val;
        int err;

        err = kstrtoul(buf, 10, &val);
        if (err < 0)
                return err;

        val = SENSORS_LIMIT(val, 0, 255);

        mutex_lock(&data->update_lock);
        data->pwm[nr] = val;
        w83627ehf_write_value(data, data->REG_PWM[nr], val);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t
store_pwm_enable(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct w83627ehf_sio_data *sio_data = dev->platform_data;
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        unsigned long val;
        int err;
        u16 reg;

        err = kstrtoul(buf, 10, &val);
        if (err < 0)
                return err;

        if (!val || (val > 4 && val != data->pwm_enable_orig[nr]))
                return -EINVAL;
        /* SmartFan III mode is not supported on NCT6776F */
        if (sio_data->kind == nct6776 && val == 4)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        data->pwm_enable[nr] = val;
        if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
                reg = w83627ehf_read_value(data,
                                           NCT6775_REG_FAN_MODE[nr]);
                reg &= 0x0f;
                reg |= (val - 1) << 4;
                w83627ehf_write_value(data,
                                      NCT6775_REG_FAN_MODE[nr], reg);
        } else {
                reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
                reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
                reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
                w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
        }
        mutex_unlock(&data->update_lock);
        return count;
}


#define show_tol_temp(reg) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
                                char *buf) \
{ \
        struct w83627ehf_data *data = w83627ehf_update_device(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        return sprintf(buf, "%d\n", data->reg[nr] * 1000); \
}

show_tol_temp(tolerance)
show_tol_temp(target_temp)

static ssize_t
store_target_temp(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        long val;
        int err;

        err = kstrtol(buf, 10, &val);
        if (err < 0)
                return err;

        val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 127);

        mutex_lock(&data->update_lock);
        data->target_temp[nr] = val;
        w83627ehf_write_value(data, data->REG_TARGET[nr], val);
        mutex_unlock(&data->update_lock);
        return count;
}

static ssize_t
store_tolerance(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        struct w83627ehf_sio_data *sio_data = dev->platform_data;
        struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
        int nr = sensor_attr->index;
        u16 reg;
        long val;
        int err;

        err = kstrtol(buf, 10, &val);
        if (err < 0)
                return err;

        /* Limit the temp to 0C - 15C */
        val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 15);

        mutex_lock(&data->update_lock);
        if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
                /* Limit tolerance further for NCT6776F */
                if (sio_data->kind == nct6776 && val > 7)
                        val = 7;
                reg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[nr]);
                reg = (reg & 0xf0) | val;
                w83627ehf_write_value(data, NCT6775_REG_FAN_MODE[nr], reg);
        } else {
                reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
                if (nr == 1)
                        reg = (reg & 0x0f) | (val << 4);
                else
                        reg = (reg & 0xf0) | val;
                w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
        }
        data->tolerance[nr] = val;
        mutex_unlock(&data->update_lock);
        return count;
}

static struct sensor_device_attribute sda_pwm[] = {
        SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0),
        SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
        SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2),
        SENSOR_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 3),
};

static struct sensor_device_attribute sda_pwm_mode[] = {
        SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
                    store_pwm_mode, 0),
        SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
                    store_pwm_mode, 1),
        SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
                    store_pwm_mode, 2),
        SENSOR_ATTR(pwm4_mode, S_IWUSR | S_IRUGO, show_pwm_mode,
                    store_pwm_mode, 3),
};

static struct sensor_device_attribute sda_pwm_enable[] = {
        SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
                    store_pwm_enable, 0),
        SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
                    store_pwm_enable, 1),
        SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
                    store_pwm_enable, 2),
        SENSOR_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
                    store_pwm_enable, 3),
};

static struct sensor_device_attribute sda_target_temp[] = {
        SENSOR_ATTR(pwm1_target, S_IWUSR | S_IRUGO, show_target_temp,
                    store_target_temp, 0),
        SENSOR_ATTR(pwm2_target, S_IWUSR | S_IRUGO, show_target_temp,
                    store_target_temp, 1),
        SENSOR_ATTR(pwm3_target, S_IWUSR | S_IRUGO, show_target_temp,
                    store_target_temp, 2),
        SENSOR_ATTR(pwm4_target, S_IWUSR | S_IRUGO, show_target_temp,
                    store_target_temp, 3),
};

static struct sensor_device_attribute sda_tolerance[] = {
        SENSOR_ATTR(pwm1_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
                    store_tolerance, 0),
        SENSOR_ATTR(pwm2_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
                    store_tolerance, 1),
        SENSOR_ATTR(pwm3_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
                    store_tolerance, 2),
        SENSOR_ATTR(pwm4_tolerance, S_IWUSR | S_IRUGO, show_tolerance,
                    store_tolerance, 3),
};

/* Smart Fan registers */

#define fan_functions(reg, REG) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
                       char *buf) \
{ \
        struct w83627ehf_data *data = w83627ehf_update_device(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        return sprintf(buf, "%d\n", data->reg[nr]); \
} \
static ssize_t \
store_##reg(struct device *dev, struct device_attribute *attr, \
                            const char *buf, size_t count) \
{ \
        struct w83627ehf_data *data = dev_get_drvdata(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        unsigned long val; \
        int err; \
        err = kstrtoul(buf, 10, &val); \
        if (err < 0) \
                return err; \
        val = SENSORS_LIMIT(val, 1, 255); \
        mutex_lock(&data->update_lock); \
        data->reg[nr] = val; \
        w83627ehf_write_value(data, data->REG_##REG[nr], val); \
        mutex_unlock(&data->update_lock); \
        return count; \
}

fan_functions(fan_start_output, FAN_START_OUTPUT)
fan_functions(fan_stop_output, FAN_STOP_OUTPUT)
fan_functions(fan_max_output, FAN_MAX_OUTPUT)
fan_functions(fan_step_output, FAN_STEP_OUTPUT)

#define fan_time_functions(reg, REG) \
static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
                                char *buf) \
{ \
        struct w83627ehf_data *data = w83627ehf_update_device(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        return sprintf(buf, "%d\n", \
                        step_time_from_reg(data->reg[nr], \
                                           data->pwm_mode[nr])); \
} \
\
static ssize_t \
store_##reg(struct device *dev, struct device_attribute *attr, \
                        const char *buf, size_t count) \
{ \
        struct w83627ehf_data *data = dev_get_drvdata(dev); \
        struct sensor_device_attribute *sensor_attr = \
                to_sensor_dev_attr(attr); \
        int nr = sensor_attr->index; \
        unsigned long val; \
        int err; \
        err = kstrtoul(buf, 10, &val); \
        if (err < 0) \
                return err; \
        val = step_time_to_reg(val, data->pwm_mode[nr]); \
        mutex_lock(&data->update_lock); \
        data->reg[nr] = val; \
        w83627ehf_write_value(data, data->REG_##REG[nr], val); \
        mutex_unlock(&data->update_lock); \
        return count; \
} \

fan_time_functions(fan_stop_time, FAN_STOP_TIME)

static ssize_t show_name(struct device *dev, struct device_attribute *attr,
                         char *buf)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);

        return sprintf(buf, "%s\n", data->name);
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);

static struct sensor_device_attribute sda_sf3_arrays_fan4[] = {
        SENSOR_ATTR(pwm4_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
                    store_fan_stop_time, 3),
        SENSOR_ATTR(pwm4_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
                    store_fan_start_output, 3),
        SENSOR_ATTR(pwm4_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
                    store_fan_stop_output, 3),
        SENSOR_ATTR(pwm4_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
                    store_fan_max_output, 3),
        SENSOR_ATTR(pwm4_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
                    store_fan_step_output, 3),
};

static struct sensor_device_attribute sda_sf3_arrays_fan3[] = {
        SENSOR_ATTR(pwm3_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
                    store_fan_stop_time, 2),
        SENSOR_ATTR(pwm3_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
                    store_fan_start_output, 2),
        SENSOR_ATTR(pwm3_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
                    store_fan_stop_output, 2),
};

static struct sensor_device_attribute sda_sf3_arrays[] = {
        SENSOR_ATTR(pwm1_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
                    store_fan_stop_time, 0),
        SENSOR_ATTR(pwm2_stop_time, S_IWUSR | S_IRUGO, show_fan_stop_time,
                    store_fan_stop_time, 1),
        SENSOR_ATTR(pwm1_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
                    store_fan_start_output, 0),
        SENSOR_ATTR(pwm2_start_output, S_IWUSR | S_IRUGO, show_fan_start_output,
                    store_fan_start_output, 1),
        SENSOR_ATTR(pwm1_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
                    store_fan_stop_output, 0),
        SENSOR_ATTR(pwm2_stop_output, S_IWUSR | S_IRUGO, show_fan_stop_output,
                    store_fan_stop_output, 1),
};


/*
 * pwm1 and pwm3 don't support max and step settings on all chips.
 * Need to check support while generating/removing attribute files.
 */
static struct sensor_device_attribute sda_sf3_max_step_arrays[] = {
        SENSOR_ATTR(pwm1_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
                    store_fan_max_output, 0),
        SENSOR_ATTR(pwm1_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
                    store_fan_step_output, 0),
        SENSOR_ATTR(pwm2_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
                    store_fan_max_output, 1),
        SENSOR_ATTR(pwm2_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
                    store_fan_step_output, 1),
        SENSOR_ATTR(pwm3_max_output, S_IWUSR | S_IRUGO, show_fan_max_output,
                    store_fan_max_output, 2),
        SENSOR_ATTR(pwm3_step_output, S_IWUSR | S_IRUGO, show_fan_step_output,
                    store_fan_step_output, 2),
};

static ssize_t
show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);


/* Case open detection */

static ssize_t
show_caseopen(struct device *dev, struct device_attribute *attr, char *buf)
{
        struct w83627ehf_data *data = w83627ehf_update_device(dev);

        return sprintf(buf, "%d\n",
                !!(data->caseopen & to_sensor_dev_attr_2(attr)->index));
}

static ssize_t
clear_caseopen(struct device *dev, struct device_attribute *attr,
                        const char *buf, size_t count)
{
        struct w83627ehf_data *data = dev_get_drvdata(dev);
        unsigned long val;
        u16 reg, mask;

        if (kstrtoul(buf, 10, &val) || val != 0)
                return -EINVAL;

        mask = to_sensor_dev_attr_2(attr)->nr;

        mutex_lock(&data->update_lock);
        reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
        w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask);
        w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask);
        data->valid = 0;        /* Force cache refresh */
        mutex_unlock(&data->update_lock);

        return count;
}

static struct sensor_device_attribute_2 sda_caseopen[] = {
        SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_caseopen,
                        clear_caseopen, 0x80, 0x10),
        SENSOR_ATTR_2(intrusion1_alarm, S_IWUSR | S_IRUGO, show_caseopen,
                        clear_caseopen, 0x40, 0x40),
};

/*
 * Driver and device management
 */

static void w83627ehf_device_remove_files(struct device *dev)
{
        /*
         * some entries in the following arrays may not have been used in
         * device_create_file(), but device_remove_file() will ignore them
         */
        int i;
        struct w83627ehf_data *data = dev_get_drvdata(dev);

        for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
                device_remove_file(dev, &sda_sf3_arrays[i].dev_attr);
        for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
                struct sensor_device_attribute *attr =
                  &sda_sf3_max_step_arrays[i];
                if (data->REG_FAN_STEP_OUTPUT &&
                    data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
                        device_remove_file(dev, &attr->dev_attr);
        }
        for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++)
                device_remove_file(dev, &sda_sf3_arrays_fan3[i].dev_attr);
        for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
                device_remove_file(dev, &sda_sf3_arrays_fan4[i].dev_attr);
        for (i = 0; i < data->in_num; i++) {
                if ((i == 6) && data->in6_skip)
                        continue;
                device_remove_file(dev, &sda_in_input[i].dev_attr);
                device_remove_file(dev, &sda_in_alarm[i].dev_attr);
                device_remove_file(dev, &sda_in_min[i].dev_attr);
                device_remove_file(dev, &sda_in_max[i].dev_attr);
        }
        for (i = 0; i < 5; i++) {
                device_remove_file(dev, &sda_fan_input[i].dev_attr);
                device_remove_file(dev, &sda_fan_alarm[i].dev_attr);
                device_remove_file(dev, &sda_fan_div[i].dev_attr);
                device_remove_file(dev, &sda_fan_min[i].dev_attr);
        }
        for (i = 0; i < data->pwm_num; i++) {
                device_remove_file(dev, &sda_pwm[i].dev_attr);
                device_remove_file(dev, &sda_pwm_mode[i].dev_attr);
                device_remove_file(dev, &sda_pwm_enable[i].dev_attr);
                device_remove_file(dev, &sda_target_temp[i].dev_attr);
                device_remove_file(dev, &sda_tolerance[i].dev_attr);
        }
        for (i = 0; i < NUM_REG_TEMP; i++) {
                if (!(data->have_temp & (1 << i)))
                        continue;
                device_remove_file(dev, &sda_temp_input[i].dev_attr);
                device_remove_file(dev, &sda_temp_label[i].dev_attr);
                if (i == 2 && data->temp3_val_only)
                        continue;
                device_remove_file(dev, &sda_temp_max[i].dev_attr);
                device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
                if (i > 2)
                        continue;
                device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
                device_remove_file(dev, &sda_temp_type[i].dev_attr);
                device_remove_file(dev, &sda_temp_offset[i].dev_attr);
        }

        device_remove_file(dev, &sda_caseopen[0].dev_attr);
        device_remove_file(dev, &sda_caseopen[1].dev_attr);

        device_remove_file(dev, &dev_attr_name);
        device_remove_file(dev, &dev_attr_cpu0_vid);
}

/* Get the monitoring functions started */
static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data,
                                                   enum kinds kind)
{
        int i;
        u8 tmp, diode;

        /* Start monitoring is needed */
        tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG);
        if (!(tmp & 0x01))
                w83627ehf_write_value(data, W83627EHF_REG_CONFIG,
                                      tmp | 0x01);

        /* Enable temperature sensors if needed */
        for (i = 0; i < NUM_REG_TEMP; i++) {
                if (!(data->have_temp & (1 << i)))
                        continue;
                if (!data->reg_temp_config[i])
                        continue;
                tmp = w83627ehf_read_value(data,
                                           data->reg_temp_config[i]);
                if (tmp & 0x01)
                        w83627ehf_write_value(data,
                                              data->reg_temp_config[i],
                                              tmp & 0xfe);
        }

        /* Enable VBAT monitoring if needed */
        tmp = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
        if (!(tmp & 0x01))
                w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);

        /* Get thermal sensor types */
        switch (kind) {
        case w83627ehf:
                diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
                break;
        case w83627uhg:
                diode = 0x00;
                break;
        default:
                diode = 0x70;
        }
        for (i = 0; i < 3; i++) {
                const char *label = NULL;

                if (data->temp_label)
                        label = data->temp_label[data->temp_src[i]];

                /* Digital source overrides analog type */
                if (label && strncmp(label, "PECI", 4) == 0)
                        data->temp_type[i] = 6;
                else if (label && strncmp(label, "AMD", 3) == 0)
                        data->temp_type[i] = 5;
                else if ((tmp & (0x02 << i)))
                        data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
                else
                        data->temp_type[i] = 4; /* thermistor */
        }
}

static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
                                   int r1, int r2)
{
        u16 tmp;

        tmp = data->temp_src[r1];
        data->temp_src[r1] = data->temp_src[r2];
        data->temp_src[r2] = tmp;

        tmp = data->reg_temp[r1];
        data->reg_temp[r1] = data->reg_temp[r2];
        data->reg_temp[r2] = tmp;

        tmp = data->reg_temp_over[r1];
        data->reg_temp_over[r1] = data->reg_temp_over[r2];
        data->reg_temp_over[r2] = tmp;

        tmp = data->reg_temp_hyst[r1];
        data->reg_temp_hyst[r1] = data->reg_temp_hyst[r2];
        data->reg_temp_hyst[r2] = tmp;

        tmp = data->reg_temp_config[r1];
        data->reg_temp_config[r1] = data->reg_temp_config[r2];
        data->reg_temp_config[r2] = tmp;
}

static void __devinit
w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp)
{
        int i;

        for (i = 0; i < n_temp; i++) {
                data->reg_temp[i] = W83627EHF_REG_TEMP[i];
                data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
                data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
                data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
        }
}

static void __devinit
w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
                           struct w83627ehf_data *data)
{
        int fan3pin, fan4pin, fan4min, fan5pin, regval;

        /* The W83627UHG is simple, only two fan inputs, no config */
        if (sio_data->kind == w83627uhg) {
                data->has_fan = 0x03; /* fan1 and fan2 */
                data->has_fan_min = 0x03;
                return;
        }

        superio_enter(sio_data->sioreg);

        /* fan4 and fan5 share some pins with the GPIO and serial flash */
        if (sio_data->kind == nct6775) {
                /* On NCT6775, fan4 shares pins with the fdc interface */
                fan3pin = 1;
                fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
                fan4min = 0;
                fan5pin = 0;
        } else if (sio_data->kind == nct6776) {
                bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80;

                superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
                regval = superio_inb(sio_data->sioreg, SIO_REG_ENABLE);

                if (regval & 0x80)
                        fan3pin = gpok;
                else
                        fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);

                if (regval & 0x40)
                        fan4pin = gpok;
                else
                        fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);

                if (regval & 0x20)
                        fan5pin = gpok;
                else
                        fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);

                fan4min = fan4pin;
        } else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
                fan3pin = 1;
                fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
                fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
                fan4min = fan4pin;
        } else {
                fan3pin = 1;
                fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
                fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
                fan4min = fan4pin;
        }

        superio_exit(sio_data->sioreg);

        data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
        data->has_fan |= (fan3pin << 2);
        data->has_fan_min |= (fan3pin << 2);

        if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
                /*
                 * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1
                 * register
                 */
                data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
                data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
        } else {
                /*
                 * It looks like fan4 and fan5 pins can be alternatively used
                 * as fan on/off switches, but fan5 control is write only :/
                 * We assume that if the serial interface is disabled, designers
                 * connected fan5 as input unless they are emitting log 1, which
                 * is not the default.
                 */
                regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
                if ((regval & (1 << 2)) && fan4pin) {
                        data->has_fan |= (1 << 3);
                        data->has_fan_min |= (1 << 3);
                }
                if (!(regval & (1 << 1)) && fan5pin) {
                        data->has_fan |= (1 << 4);
                        data->has_fan_min |= (1 << 4);
                }
        }
}

static int __devinit w83627ehf_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct w83627ehf_sio_data *sio_data = dev->platform_data;
        struct w83627ehf_data *data;
        struct resource *res;
        u8 en_vrm10;
        int i, err = 0;

        res = platform_get_resource(pdev, IORESOURCE_IO, 0);
        if (!request_region(res->start, IOREGION_LENGTH, DRVNAME)) {
                err = -EBUSY;
                dev_err(dev, "Failed to request region 0x%lx-0x%lx\n",
                        (unsigned long)res->start,
                        (unsigned long)res->start + IOREGION_LENGTH - 1);
                goto exit;
        }

        data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data),
                            GFP_KERNEL);
        if (!data) {
                err = -ENOMEM;
                goto exit_release;
        }

        data->addr = res->start;
        mutex_init(&data->lock);
        mutex_init(&data->update_lock);
        data->name = w83627ehf_device_names[sio_data->kind];
        platform_set_drvdata(pdev, data);

        /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
        data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
        /* 667HG, NCT6775F, and NCT6776F have 3 pwms, and 627UHG has only 2 */
        switch (sio_data->kind) {
        default:
                data->pwm_num = 4;
                break;
        case w83667hg:
        case w83667hg_b:
        case nct6775:
        case nct6776:
                data->pwm_num = 3;
                break;
        case w83627uhg:
                data->pwm_num = 2;
                break;
        }

        /* Default to 3 temperature inputs, code below will adjust as needed */
        data->have_temp = 0x07;

        /* Deal with temperature register setup first. */
        if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
                int mask = 0;

                /*
                 * Display temperature sensor output only if it monitors
                 * a source other than one already reported. Always display
                 * first three temperature registers, though.
                 */
                for (i = 0; i < NUM_REG_TEMP; i++) {
                        u8 src;

                        data->reg_temp[i] = NCT6775_REG_TEMP[i];
                        data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i];
                        data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i];
                        data->reg_temp_config[i] = NCT6775_REG_TEMP_CONFIG[i];

                        src = w83627ehf_read_value(data,
                                                   NCT6775_REG_TEMP_SOURCE[i]);
                        src &= 0x1f;
                        if (src && !(mask & (1 << src))) {
                                data->have_temp |= 1 << i;
                                mask |= 1 << src;
                        }

                        data->temp_src[i] = src;

                        /*
                         * Now do some register swapping if index 0..2 don't
                         * point to SYSTIN(1), CPUIN(2), and AUXIN(3).
                         * Idea is to have the first three attributes
                         * report SYSTIN, CPUIN, and AUXIN if possible
                         * without overriding the basic system configuration.
                         */
                        if (i > 0 && data->temp_src[0] != 1
                            && data->temp_src[i] == 1)
                                w82627ehf_swap_tempreg(data, 0, i);
                        if (i > 1 && data->temp_src[1] != 2
                            && data->temp_src[i] == 2)
                                w82627ehf_swap_tempreg(data, 1, i);
                        if (i > 2 && data->temp_src[2] != 3
                            && data->temp_src[i] == 3)
                                w82627ehf_swap_tempreg(data, 2, i);
                }
                if (sio_data->kind == nct6776) {
                        /*
                         * On NCT6776, AUXTIN and VIN3 pins are shared.
                         * Only way to detect it is to check if AUXTIN is used
                         * as a temperature source, and if that source is
                         * enabled.
                         *
                         * If that is the case, disable in6, which reports VIN3.
                         * Otherwise disable temp3.
                         */
                        if (data->temp_src[2] == 3) {
                                u8 reg;

                                if (data->reg_temp_config[2])
                                        reg = w83627ehf_read_value(data,
                                                data->reg_temp_config[2]);
                                else
                                        reg = 0; /* Assume AUXTIN is used */

                                if (reg & 0x01)
                                        data->have_temp &= ~(1 << 2);
                                else
                                        data->in6_skip = 1;
                        }
                        data->temp_label = nct6776_temp_label;
                } else {
                        data->temp_label = nct6775_temp_label;
                }
                data->have_temp_offset = data->have_temp & 0x07;
                for (i = 0; i < 3; i++) {
                        if (data->temp_src[i] > 3)
                                data->have_temp_offset &= ~(1 << i);
                }
        } else if (sio_data->kind == w83667hg_b) {
                u8 reg;

                w83627ehf_set_temp_reg_ehf(data, 4);

                /*
                 * Temperature sources are selected with bank 0, registers 0x49
                 * and 0x4a.
                 */
                reg = w83627ehf_read_value(data, 0x4a);
                data->temp_src[0] = reg >> 5;
                reg = w83627ehf_read_value(data, 0x49);
                data->temp_src[1] = reg & 0x07;
                data->temp_src[2] = (reg >> 4) & 0x07;

                /*
                 * W83667HG-B has another temperature register at 0x7e.
                 * The temperature source is selected with register 0x7d.
                 * Support it if the source differs from already reported
                 * sources.
                 */
                reg = w83627ehf_read_value(data, 0x7d);
                reg &= 0x07;
                if (reg != data->temp_src[0] && reg != data->temp_src[1]
                    && reg != data->temp_src[2]) {
                        data->temp_src[3] = reg;
                        data->have_temp |= 1 << 3;
                }

                /*
                 * Chip supports either AUXTIN or VIN3. Try to find out which
                 * one.
                 */
                reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]);
                if (data->temp_src[2] == 2 && (reg & 0x01))
                        data->have_temp &= ~(1 << 2);

                if ((data->temp_src[2] == 2 && (data->have_temp & (1 << 2)))
                    || (data->temp_src[3] == 2 && (data->have_temp & (1 << 3))))
                        data->in6_skip = 1;

                data->temp_label = w83667hg_b_temp_label;
                data->have_temp_offset = data->have_temp & 0x07;
                for (i = 0; i < 3; i++) {
                        if (data->temp_src[i] > 2)
                                data->have_temp_offset &= ~(1 << i);
                }
        } else if (sio_data->kind == w83627uhg) {
                u8 reg;

                w83627ehf_set_temp_reg_ehf(data, 3);

                /*
                 * Temperature sources for temp2 and temp3 are selected with
                 * bank 0, registers 0x49 and 0x4a.
                 */
                data->temp_src[0] = 0;  /* SYSTIN */
                reg = w83627ehf_read_value(data, 0x49) & 0x07;
                /* Adjust to have the same mapping as other source registers */
                if (reg == 0)
                        data->temp_src[1] = 1;
                else if (reg >= 2 && reg <= 5)
                        data->temp_src[1] = reg + 2;
                else    /* should never happen */
                        data->have_temp &= ~(1 << 1);
                reg = w83627ehf_read_value(data, 0x4a);
                data->temp_src[2] = reg >> 5;

                /*
                 * Skip temp3 if source is invalid or the same as temp1
                 * or temp2.
                 */
                if (data->temp_src[2] == 2 || data->temp_src[2] == 3 ||
                    data->temp_src[2] == data->temp_src[0] ||
                    ((data->have_temp & (1 << 1)) &&
                     data->temp_src[2] == data->temp_src[1]))
                        data->have_temp &= ~(1 << 2);
                else
                        data->temp3_val_only = 1;       /* No limit regs */

                data->in6_skip = 1;                     /* No VIN3 */

                data->temp_label = w83667hg_b_temp_label;
                data->have_temp_offset = data->have_temp & 0x03;
                for (i = 0; i < 3; i++) {
                        if (data->temp_src[i] > 1)
                                data->have_temp_offset &= ~(1 << i);
                }
        } else {
                w83627ehf_set_temp_reg_ehf(data, 3);

                /* Temperature sources are fixed */

                if (sio_data->kind == w83667hg) {
                        u8 reg;

                        /*
                         * Chip supports either AUXTIN or VIN3. Try to find
                         * out which one.
                         */
                        reg = w83627ehf_read_value(data,
                                                W83627EHF_REG_TEMP_CONFIG[2]);
                        if (reg & 0x01)
                                data->have_temp &= ~(1 << 2);
                        else
                                data->in6_skip = 1;
                }
                data->have_temp_offset = data->have_temp & 0x07;
        }

        if (sio_data->kind == nct6775) {
                data->has_fan_div = true;
                data->fan_from_reg = fan_from_reg16;
                data->fan_from_reg_min = fan_from_reg8;
                data->REG_PWM = NCT6775_REG_PWM;
                data->REG_TARGET = NCT6775_REG_TARGET;
                data->REG_FAN = NCT6775_REG_FAN;
                data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
                data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT;
                data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT;
                data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME;
                data->REG_FAN_MAX_OUTPUT = NCT6775_REG_FAN_MAX_OUTPUT;
                data->REG_FAN_STEP_OUTPUT = NCT6775_REG_FAN_STEP_OUTPUT;
        } else if (sio_data->kind == nct6776) {
                data->has_fan_div = false;
                data->fan_from_reg = fan_from_reg13;
                data->fan_from_reg_min = fan_from_reg13;
                data->REG_PWM = NCT6775_REG_PWM;
                data->REG_TARGET = NCT6775_REG_TARGET;
                data->REG_FAN = NCT6775_REG_FAN;
                data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
                data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT;
                data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT;
                data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME;
        } else if (sio_data->kind == w83667hg_b) {
                data->has_fan_div = true;
                data->fan_from_reg = fan_from_reg8;
                data->fan_from_reg_min = fan_from_reg8;
                data->REG_PWM = W83627EHF_REG_PWM;
                data->REG_TARGET = W83627EHF_REG_TARGET;
                data->REG_FAN = W83627EHF_REG_FAN;
                data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
                data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
                data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
                data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
                data->REG_FAN_MAX_OUTPUT =
                  W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
                data->REG_FAN_STEP_OUTPUT =
                  W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
        } else {
                data->has_fan_div = true;
                data->fan_from_reg = fan_from_reg8;
                data->fan_from_reg_min = fan_from_reg8;
                data->REG_PWM = W83627EHF_REG_PWM;
                data->REG_TARGET = W83627EHF_REG_TARGET;
                data->REG_FAN = W83627EHF_REG_FAN;
                data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
                data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
                data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
                data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
                data->REG_FAN_MAX_OUTPUT =
                  W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
                data->REG_FAN_STEP_OUTPUT =
                  W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
        }

        /* Setup input voltage scaling factors */
        if (sio_data->kind == w83627uhg)
                data->scale_in = scale_in_w83627uhg;
        else
                data->scale_in = scale_in_common;

        /* Initialize the chip */
        w83627ehf_init_device(data, sio_data->kind);

        data->vrm = vid_which_vrm();
        superio_enter(sio_data->sioreg);
        /* Read VID value */
        if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b ||
            sio_data->kind == nct6775 || sio_data->kind == nct6776) {
                /*
                 * W83667HG has different pins for VID input and output, so
                 * we can get the VID input values directly at logical device D
                 * 0xe3.
                 */
                superio_select(sio_data->sioreg, W83667HG_LD_VID);
                data->vid = superio_inb(sio_data->sioreg, 0xe3);
                err = device_create_file(dev, &dev_attr_cpu0_vid);
                if (err)
                        goto exit_release;
        } else if (sio_data->kind != w83627uhg) {
                superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
                if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
                        /*
                         * Set VID input sensibility if needed. In theory the
                         * BIOS should have set it, but in practice it's not
                         * always the case. We only do it for the W83627EHF/EHG
                         * because the W83627DHG is more complex in this
                         * respect.
                         */
                        if (sio_data->kind == w83627ehf) {
                                en_vrm10 = superio_inb(sio_data->sioreg,
                                                       SIO_REG_EN_VRM10);
                                if ((en_vrm10 & 0x08) && data->vrm == 90) {
                                        dev_warn(dev, "Setting VID input "
                                                 "voltage to TTL\n");
                                        superio_outb(sio_data->sioreg,
                                                     SIO_REG_EN_VRM10,
                                                     en_vrm10 & ~0x08);
                                } else if (!(en_vrm10 & 0x08)
                                           && data->vrm == 100) {
                                        dev_warn(dev, "Setting VID input "
                                                 "voltage to VRM10\n");
                                        superio_outb(sio_data->sioreg,
                                                     SIO_REG_EN_VRM10,
                                                     en_vrm10 | 0x08);
                                }
                        }

                        data->vid = superio_inb(sio_data->sioreg,
                                                SIO_REG_VID_DATA);
                        if (sio_data->kind == w83627ehf) /* 6 VID pins only */
                                data->vid &= 0x3f;

                        err = device_create_file(dev, &dev_attr_cpu0_vid);
                        if (err)
                                goto exit_release;
                } else {
                        dev_info(dev, "VID pins in output mode, CPU VID not "
                                 "available\n");
                }
        }

        if (fan_debounce &&
            (sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
                u8 tmp;

                superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
                tmp = superio_inb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE);
                if (sio_data->kind == nct6776)
                        superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE,
                                     0x3e | tmp);
                else
                        superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE,
                                     0x1e | tmp);
                pr_info("Enabled fan debounce for chip %s\n", data->name);
        }

        superio_exit(sio_data->sioreg);

        w83627ehf_check_fan_inputs(sio_data, data);

        /* Read fan clock dividers immediately */
        w83627ehf_update_fan_div_common(dev, data);

        /* Read pwm data to save original values */
        w83627ehf_update_pwm_common(dev, data);
        for (i = 0; i < data->pwm_num; i++)
                data->pwm_enable_orig[i] = data->pwm_enable[i];

        /* Register sysfs hooks */
        for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) {
                err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr);
                if (err)
                        goto exit_remove;
        }

        for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
                struct sensor_device_attribute *attr =
                  &sda_sf3_max_step_arrays[i];
                if (data->REG_FAN_STEP_OUTPUT &&
                    data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) {
                        err = device_create_file(dev, &attr->dev_attr);
                        if (err)
                                goto exit_remove;
                }
        }
        /* if fan3 and fan4 are enabled create the sf3 files for them */
        if ((data->has_fan & (1 << 2)) && data->pwm_num >= 3)
                for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan3); i++) {
                        err = device_create_file(dev,
                                        &sda_sf3_arrays_fan3[i].dev_attr);
                        if (err)
                                goto exit_remove;
                }
        if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
                for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
                        err = device_create_file(dev,
                                        &sda_sf3_arrays_fan4[i].dev_attr);
                        if (err)
                                goto exit_remove;
                }

        for (i = 0; i < data->in_num; i++) {
                if ((i == 6) && data->in6_skip)
                        continue;
                if ((err = device_create_file(dev, &sda_in_input[i].dev_attr))
                        || (err = device_create_file(dev,
                                &sda_in_alarm[i].dev_attr))
                        || (err = device_create_file(dev,
                                &sda_in_min[i].dev_attr))
                        || (err = device_create_file(dev,
                                &sda_in_max[i].dev_attr)))
                        goto exit_remove;
        }

        for (i = 0; i < 5; i++) {
                if (data->has_fan & (1 << i)) {
                        if ((err = device_create_file(dev,
                                        &sda_fan_input[i].dev_attr))
                                || (err = device_create_file(dev,
                                        &sda_fan_alarm[i].dev_attr)))
                                goto exit_remove;
                        if (sio_data->kind != nct6776) {
                                err = device_create_file(dev,
                                                &sda_fan_div[i].dev_attr);
                                if (err)
                                        goto exit_remove;
                        }
                        if (data->has_fan_min & (1 << i)) {
                                err = device_create_file(dev,
                                                &sda_fan_min[i].dev_attr);
                                if (err)
                                        goto exit_remove;
                        }
                        if (i < data->pwm_num &&
                                ((err = device_create_file(dev,
                                        &sda_pwm[i].dev_attr))
                                || (err = device_create_file(dev,
                                        &sda_pwm_mode[i].dev_attr))
                                || (err = device_create_file(dev,
                                        &sda_pwm_enable[i].dev_attr))
                                || (err = device_create_file(dev,
                                        &sda_target_temp[i].dev_attr))
                                || (err = device_create_file(dev,
                                        &sda_tolerance[i].dev_attr))))
                                goto exit_remove;
                }
        }

        for (i = 0; i < NUM_REG_TEMP; i++) {
                if (!(data->have_temp & (1 << i)))
                        continue;
                err = device_create_file(dev, &sda_temp_input[i].dev_attr);
                if (err)
                        goto exit_remove;
                if (data->temp_label) {
                        err = device_create_file(dev,
                                                 &sda_temp_label[i].dev_attr);
                        if (err)
                                goto exit_remove;
                }
                if (i == 2 && data->temp3_val_only)
                        continue;
                if (data->reg_temp_over[i]) {
                        err = device_create_file(dev,
                                &sda_temp_max[i].dev_attr);
                        if (err)
                                goto exit_remove;
                }
                if (data->reg_temp_hyst[i]) {
                        err = device_create_file(dev,
                                &sda_temp_max_hyst[i].dev_attr);
                        if (err)
                                goto exit_remove;
                }
                if (i > 2)
                        continue;
                if ((err = device_create_file(dev,
                                &sda_temp_alarm[i].dev_attr))
                        || (err = device_create_file(dev,
                                &sda_temp_type[i].dev_attr)))
                        goto exit_remove;
                if (data->have_temp_offset & (1 << i)) {
                        err = device_create_file(dev,
                                                 &sda_temp_offset[i].dev_attr);
                        if (err)
                                goto exit_remove;
                }
        }

        err = device_create_file(dev, &sda_caseopen[0].dev_attr);
        if (err)
                goto exit_remove;

        if (sio_data->kind == nct6776) {
                err = device_create_file(dev, &sda_caseopen[1].dev_attr);
                if (err)
                        goto exit_remove;
        }

        err = device_create_file(dev, &dev_attr_name);
        if (err)
                goto exit_remove;

        data->hwmon_dev = hwmon_device_register(dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto exit_remove;
        }

        return 0;

exit_remove:
        w83627ehf_device_remove_files(dev);
exit_release:
        platform_set_drvdata(pdev, NULL);
        release_region(res->start, IOREGION_LENGTH);
exit:
        return err;
}

static int __devexit w83627ehf_remove(struct platform_device *pdev)
{
        struct w83627ehf_data *data = platform_get_drvdata(pdev);

        hwmon_device_unregister(data->hwmon_dev);
        w83627ehf_device_remove_files(&pdev->dev);
        release_region(data->addr, IOREGION_LENGTH);
        platform_set_drvdata(pdev, NULL);

        return 0;
}

static struct platform_driver w83627ehf_driver = {
        .driver = {
                .owner  = THIS_MODULE,
                .name   = DRVNAME,
        },
        .probe          = w83627ehf_probe,
        .remove         = __devexit_p(w83627ehf_remove),
};

/* w83627ehf_find() looks for a '627 in the Super-I/O config space */
static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
                                 struct w83627ehf_sio_data *sio_data)
{
        static const char sio_name_W83627EHF[] __initconst = "W83627EHF";
        static const char sio_name_W83627EHG[] __initconst = "W83627EHG";
        static const char sio_name_W83627DHG[] __initconst = "W83627DHG";
        static const char sio_name_W83627DHG_P[] __initconst = "W83627DHG-P";
        static const char sio_name_W83627UHG[] __initconst = "W83627UHG";
        static const char sio_name_W83667HG[] __initconst = "W83667HG";
        static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B";
        static const char sio_name_NCT6775[] __initconst = "NCT6775F";
        static const char sio_name_NCT6776[] __initconst = "NCT6776F";

        u16 val;
        const char *sio_name;

        superio_enter(sioaddr);

        if (force_id)
                val = force_id;
        else
                val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8)
                    | superio_inb(sioaddr, SIO_REG_DEVID + 1);
        switch (val & SIO_ID_MASK) {
        case SIO_W83627EHF_ID:
                sio_data->kind = w83627ehf;
                sio_name = sio_name_W83627EHF;
                break;
        case SIO_W83627EHG_ID:
                sio_data->kind = w83627ehf;
                sio_name = sio_name_W83627EHG;
                break;
        case SIO_W83627DHG_ID:
                sio_data->kind = w83627dhg;
                sio_name = sio_name_W83627DHG;
                break;
        case SIO_W83627DHG_P_ID:
                sio_data->kind = w83627dhg_p;
                sio_name = sio_name_W83627DHG_P;
                break;
        case SIO_W83627UHG_ID:
                sio_data->kind = w83627uhg;
                sio_name = sio_name_W83627UHG;
                break;
        case SIO_W83667HG_ID:
                sio_data->kind = w83667hg;
                sio_name = sio_name_W83667HG;
                break;
        case SIO_W83667HG_B_ID:
                sio_data->kind = w83667hg_b;
                sio_name = sio_name_W83667HG_B;
                break;
        case SIO_NCT6775_ID:
                sio_data->kind = nct6775;
                sio_name = sio_name_NCT6775;
                break;
        case SIO_NCT6776_ID:
                sio_data->kind = nct6776;
                sio_name = sio_name_NCT6776;
                break;
        default:
                if (val != 0xffff)
                        pr_debug("unsupported chip ID: 0x%04x\n", val);
                superio_exit(sioaddr);
                return -ENODEV;
        }

        /* We have a known chip, find the HWM I/O address */
        superio_select(sioaddr, W83627EHF_LD_HWM);
        val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8)
            | superio_inb(sioaddr, SIO_REG_ADDR + 1);
        *addr = val & IOREGION_ALIGNMENT;
        if (*addr == 0) {
                pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
                superio_exit(sioaddr);
                return -ENODEV;
        }

        /* Activate logical device if needed */
        val = superio_inb(sioaddr, SIO_REG_ENABLE);
        if (!(val & 0x01)) {
                pr_warn("Forcibly enabling Super-I/O. "
                        "Sensor is probably unusable.\n");
                superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
        }

        superio_exit(sioaddr);
        pr_info("Found %s chip at %#x\n", sio_name, *addr);
        sio_data->sioreg = sioaddr;

        return 0;
}

/*
 * when Super-I/O functions move to a separate file, the Super-I/O
 * bus will manage the lifetime of the device and this module will only keep
 * track of the w83627ehf driver. But since we platform_device_alloc(), we
 * must keep track of the device
 */
static struct platform_device *pdev;

static int __init sensors_w83627ehf_init(void)
{
        int err;
        unsigned short address;
        struct resource res;
        struct w83627ehf_sio_data sio_data;

        /*
         * initialize sio_data->kind and sio_data->sioreg.
         *
         * when Super-I/O functions move to a separate file, the Super-I/O
         * driver will probe 0x2e and 0x4e and auto-detect the presence of a
         * w83627ehf hardware monitor, and call probe()
         */
        if (w83627ehf_find(0x2e, &address, &sio_data) &&
            w83627ehf_find(0x4e, &address, &sio_data))
                return -ENODEV;

        err = platform_driver_register(&w83627ehf_driver);
        if (err)
                goto exit;

        pdev = platform_device_alloc(DRVNAME, address);
        if (!pdev) {
                err = -ENOMEM;
                pr_err("Device allocation failed\n");
                goto exit_unregister;
        }

        err = platform_device_add_data(pdev, &sio_data,
                                       sizeof(struct w83627ehf_sio_data));
        if (err) {
                pr_err("Platform data allocation failed\n");
                goto exit_device_put;
        }

        memset(&res, 0, sizeof(res));
        res.name = DRVNAME;
        res.start = address + IOREGION_OFFSET;
        res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
        res.flags = IORESOURCE_IO;

        err = acpi_check_resource_conflict(&res);
        if (err)
                goto exit_device_put;

        err = platform_device_add_resources(pdev, &res, 1);
        if (err) {
                pr_err("Device resource addition failed (%d)\n", err);
                goto exit_device_put;
        }

        /* platform_device_add calls probe() */
        err = platform_device_add(pdev);
        if (err) {
                pr_err("Device addition failed (%d)\n", err);
                goto exit_device_put;
        }

        return 0;

exit_device_put:
        platform_device_put(pdev);
exit_unregister:
        platform_driver_unregister(&w83627ehf_driver);
exit:
        return err;
}

static void __exit sensors_w83627ehf_exit(void)
{
        platform_device_unregister(pdev);
        platform_driver_unregister(&w83627ehf_driver);
}

MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("W83627EHF driver");
MODULE_LICENSE("GPL");

module_init(sensors_w83627ehf_init);
module_exit(sensors_w83627ehf_exit);