linux/drivers/atm/iphase.h
<<
>>
Prefs
   1/******************************************************************************
   2             Device driver for Interphase ATM PCI adapter cards 
   3                    Author: Peter Wang  <pwang@iphase.com>            
   4                   Interphase Corporation  <www.iphase.com>           
   5                               Version: 1.0   
   6               iphase.h:  This is the header file for iphase.c. 
   7*******************************************************************************
   8      
   9      This software may be used and distributed according to the terms
  10      of the GNU General Public License (GPL), incorporated herein by reference.
  11      Drivers based on this skeleton fall under the GPL and must retain
  12      the authorship (implicit copyright) notice.
  13
  14      This program is distributed in the hope that it will be useful, but
  15      WITHOUT ANY WARRANTY; without even the implied warranty of
  16      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  17      General Public License for more details.
  18      
  19      Modified from an incomplete driver for Interphase 5575 1KVC 1M card which 
  20      was originally written by Monalisa Agrawal at UNH. Now this driver 
  21      supports a variety of varients of Interphase ATM PCI (i)Chip adapter 
  22      card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM) 
  23      in terms of PHY type, the size of control memory and the size of 
  24      packet memory. The followings are the change log and history:
  25     
  26          Bugfix the Mona's UBR driver.
  27          Modify the basic memory allocation and dma logic.
  28          Port the driver to the latest kernel from 2.0.46.
  29          Complete the ABR logic of the driver, and added the ABR work-
  30              around for the hardware anormalies.
  31          Add the CBR support.
  32          Add the flow control logic to the driver to allow rate-limit VC.
  33          Add 4K VC support to the board with 512K control memory.
  34          Add the support of all the variants of the Interphase ATM PCI 
  35          (i)Chip adapter cards including x575 (155M OC3 and UTP155), x525
  36          (25M UTP25) and x531 (DS3 and E3).
  37          Add SMP support.
  38
  39      Support and updates available at: ftp://ftp.iphase.com/pub/atm
  40
  41*******************************************************************************/
  42  
  43#ifndef IPHASE_H  
  44#define IPHASE_H  
  45
  46
  47/************************ IADBG DEFINE *********************************/
  48/* IADebugFlag Bit Map */ 
  49#define IF_IADBG_INIT_ADAPTER   0x00000001        // init adapter info
  50#define IF_IADBG_TX             0x00000002        // debug TX
  51#define IF_IADBG_RX             0x00000004        // debug RX
  52#define IF_IADBG_QUERY_INFO     0x00000008        // debug Request call
  53#define IF_IADBG_SHUTDOWN       0x00000010        // debug shutdown event
  54#define IF_IADBG_INTR           0x00000020        // debug interrupt DPC
  55#define IF_IADBG_TXPKT          0x00000040        // debug TX PKT
  56#define IF_IADBG_RXPKT          0x00000080        // debug RX PKT
  57#define IF_IADBG_ERR            0x00000100        // debug system error
  58#define IF_IADBG_EVENT          0x00000200        // debug event
  59#define IF_IADBG_DIS_INTR       0x00001000        // debug disable interrupt
  60#define IF_IADBG_EN_INTR        0x00002000        // debug enable interrupt
  61#define IF_IADBG_LOUD           0x00004000        // debugging info
  62#define IF_IADBG_VERY_LOUD      0x00008000        // excessive debugging info
  63#define IF_IADBG_CBR            0x00100000        //
  64#define IF_IADBG_UBR            0x00200000        //
  65#define IF_IADBG_ABR            0x00400000        //
  66#define IF_IADBG_DESC           0x01000000        //
  67#define IF_IADBG_SUNI_STAT      0x02000000        // suni statistics
  68#define IF_IADBG_RESET          0x04000000        
  69
  70#define IF_IADBG(f) if (IADebugFlag & (f))
  71
  72#ifdef  CONFIG_ATM_IA_DEBUG   /* Debug build */
  73
  74#define IF_LOUD(A) IF_IADBG(IF_IADBG_LOUD) { A }
  75#define IF_ERR(A) IF_IADBG(IF_IADBG_ERR) { A }
  76#define IF_VERY_LOUD(A) IF_IADBG( IF_IADBG_VERY_LOUD ) { A }
  77
  78#define IF_INIT_ADAPTER(A) IF_IADBG( IF_IADBG_INIT_ADAPTER ) { A }
  79#define IF_INIT(A) IF_IADBG( IF_IADBG_INIT_ADAPTER ) { A }
  80#define IF_SUNI_STAT(A) IF_IADBG( IF_IADBG_SUNI_STAT ) { A }
  81#define IF_QUERY_INFO(A) IF_IADBG( IF_IADBG_QUERY_INFO ) { A }
  82#define IF_COPY_OVER(A) IF_IADBG( IF_IADBG_COPY_OVER ) { A }
  83
  84#define IF_INTR(A) IF_IADBG( IF_IADBG_INTR ) { A }
  85#define IF_DIS_INTR(A) IF_IADBG( IF_IADBG_DIS_INTR ) { A }
  86#define IF_EN_INTR(A) IF_IADBG( IF_IADBG_EN_INTR ) { A }
  87
  88#define IF_TX(A) IF_IADBG( IF_IADBG_TX ) { A }
  89#define IF_RX(A) IF_IADBG( IF_IADBG_RX ) { A }
  90#define IF_TXPKT(A) IF_IADBG( IF_IADBG_TXPKT ) { A }
  91#define IF_RXPKT(A) IF_IADBG( IF_IADBG_RXPKT ) { A }
  92
  93#define IF_SHUTDOWN(A) IF_IADBG(IF_IADBG_SHUTDOWN) { A }
  94#define IF_CBR(A) IF_IADBG( IF_IADBG_CBR ) { A }
  95#define IF_UBR(A) IF_IADBG( IF_IADBG_UBR ) { A }
  96#define IF_ABR(A) IF_IADBG( IF_IADBG_ABR ) { A }
  97#define IF_EVENT(A) IF_IADBG( IF_IADBG_EVENT) { A }
  98
  99#else /* free build */
 100#define IF_LOUD(A)
 101#define IF_VERY_LOUD(A)
 102#define IF_INIT_ADAPTER(A)
 103#define IF_INIT(A)
 104#define IF_SUNI_STAT(A)
 105#define IF_PVC_CHKPKT(A)
 106#define IF_QUERY_INFO(A)
 107#define IF_COPY_OVER(A)
 108#define IF_HANG(A)
 109#define IF_INTR(A)
 110#define IF_DIS_INTR(A)
 111#define IF_EN_INTR(A)
 112#define IF_TX(A)
 113#define IF_RX(A)
 114#define IF_TXDEBUG(A)
 115#define IF_VC(A)
 116#define IF_ERR(A) 
 117#define IF_CBR(A)
 118#define IF_UBR(A)
 119#define IF_ABR(A)
 120#define IF_SHUTDOWN(A)
 121#define DbgPrint(A)
 122#define IF_EVENT(A)
 123#define IF_TXPKT(A) 
 124#define IF_RXPKT(A)
 125#endif /* CONFIG_ATM_IA_DEBUG */ 
 126
 127#define isprint(a) ((a >=' ')&&(a <= '~'))  
 128#define ATM_DESC(skb) (skb->protocol)
 129#define IA_SKB_STATE(skb) (skb->protocol)
 130#define IA_DLED   1
 131#define IA_TX_DONE 2
 132
 133/* iadbg defines */
 134#define IA_CMD   0x7749
 135typedef struct {
 136        int cmd;
 137        int sub_cmd;
 138        int len;
 139        u32 maddr;
 140        int status;
 141        void __user *buf;
 142} IA_CMDBUF, *PIA_CMDBUF;
 143
 144/* cmds */
 145#define MEMDUMP                 0x01
 146
 147/* sub_cmds */
 148#define MEMDUMP_SEGREG          0x2
 149#define MEMDUMP_DEV             0x1
 150#define MEMDUMP_REASSREG        0x3
 151#define MEMDUMP_FFL             0x4
 152#define READ_REG                0x5
 153#define WAKE_DBG_WAIT           0x6
 154
 155/************************ IADBG DEFINE END ***************************/
 156
 157#define Boolean(x)      ((x) ? 1 : 0)
 158#define NR_VCI 1024             /* number of VCIs */  
 159#define NR_VCI_LD 10            /* log2(NR_VCI) */  
 160#define NR_VCI_4K 4096          /* number of VCIs */  
 161#define NR_VCI_4K_LD 12         /* log2(NR_VCI) */  
 162#define MEM_VALID 0xfffffff0    /* mask base address with this */  
 163  
 164#ifndef PCI_VENDOR_ID_IPHASE  
 165#define PCI_VENDOR_ID_IPHASE 0x107e  
 166#endif  
 167#ifndef PCI_DEVICE_ID_IPHASE_5575  
 168#define PCI_DEVICE_ID_IPHASE_5575 0x0008  
 169#endif  
 170#define DEV_LABEL       "ia"  
 171#define PCR     207692  
 172#define ICR     100000  
 173#define MCR     0  
 174#define TBE     1000  
 175#define FRTT    1  
 176#define RIF     2                 
 177#define RDF     4  
 178#define NRMCODE 5       /* 0 - 7 */  
 179#define TRMCODE 3       /* 0 - 7 */  
 180#define CDFCODE 6  
 181#define ATDFCODE 2      /* 0 - 15 */  
 182  
 183/*---------------------- Packet/Cell Memory ------------------------*/  
 184#define TX_PACKET_RAM   0x00000 /* start of Trasnmit Packet memory - 0 */  
 185#define DFL_TX_BUF_SZ   10240   /* 10 K buffers */  
 186#define DFL_TX_BUFFERS     50   /* number of packet buffers for Tx   
 187                                        - descriptor 0 unused */  
 188#define REASS_RAM_SIZE 0x10000  /* for 64K 1K VC board */  
 189#define RX_PACKET_RAM   0x80000 /* start of Receive Packet memory - 512K */  
 190#define DFL_RX_BUF_SZ   10240   /* 10k buffers */  
 191#define DFL_RX_BUFFERS      50  /* number of packet buffers for Rx   
 192                                        - descriptor 0 unused */  
 193  
 194struct cpcs_trailer 
 195{  
 196        u_short control;  
 197        u_short length;  
 198        u_int   crc32;  
 199};  
 200
 201struct cpcs_trailer_desc
 202{
 203        struct cpcs_trailer *cpcs;
 204        dma_addr_t dma_addr;
 205};
 206
 207struct ia_vcc 
 208{ 
 209        int rxing;       
 210        int txing;               
 211        int NumCbrEntry;
 212        u32 pcr;
 213        u32 saved_tx_quota;
 214        int flow_inc;
 215        struct sk_buff_head txing_skb; 
 216        int  ltimeout;                  
 217        u8  vc_desc_cnt;                
 218                
 219};  
 220  
 221struct abr_vc_table 
 222{  
 223        u_char status;  
 224        u_char rdf;  
 225        u_short air;  
 226        u_int res[3];  
 227        u_int req_rm_cell_data1;  
 228        u_int req_rm_cell_data2;  
 229        u_int add_rm_cell_data1;  
 230        u_int add_rm_cell_data2;  
 231};  
 232    
 233/* 32 byte entries */  
 234struct main_vc 
 235{  
 236        u_short         type;  
 237#define ABR     0x8000  
 238#define UBR     0xc000  
 239#define CBR     0x0000  
 240        /* ABR fields */  
 241        u_short         nrm;     
 242        u_short         trm;       
 243        u_short         rm_timestamp_hi;  
 244        u_short         rm_timestamp_lo:8,  
 245                        crm:8;            
 246        u_short         remainder;      /* ABR and UBR fields - last 10 bits*/  
 247        u_short         next_vc_sched;  
 248        u_short         present_desc;   /* all classes */  
 249        u_short         last_cell_slot; /* ABR and UBR */  
 250        u_short         pcr;  
 251        u_short         fraction;  
 252        u_short         icr;  
 253        u_short         atdf;  
 254        u_short         mcr;  
 255        u_short         acr;             
 256        u_short         unack:8,  
 257                        status:8;       /* all classes */  
 258#define UIOLI 0x80  
 259#define CRC_APPEND 0x40                 /* for status field - CRC-32 append */  
 260#define ABR_STATE 0x02  
 261  
 262};  
 263  
 264  
 265/* 8 byte entries */  
 266struct ext_vc 
 267{  
 268        u_short         atm_hdr1;  
 269        u_short         atm_hdr2;  
 270        u_short         last_desc;  
 271        u_short         out_of_rate_link;   /* reserved for UBR and CBR */  
 272};  
 273  
 274  
 275#define DLE_ENTRIES 256  
 276#define DMA_INT_ENABLE 0x0002   /* use for both Tx and Rx */  
 277#define TX_DLE_PSI 0x0001  
 278#define DLE_TOTAL_SIZE (sizeof(struct dle)*DLE_ENTRIES)
 279  
 280/* Descriptor List Entries (DLE) */  
 281struct dle 
 282{  
 283        u32     sys_pkt_addr;  
 284        u32     local_pkt_addr;  
 285        u32     bytes;  
 286        u16     prq_wr_ptr_data;  
 287        u16     mode;  
 288};  
 289  
 290struct dle_q 
 291{  
 292        struct dle      *start;  
 293        struct dle      *end;  
 294        struct dle      *read;  
 295        struct dle      *write;  
 296};  
 297  
 298struct free_desc_q 
 299{  
 300        int     desc;   /* Descriptor number */  
 301        struct free_desc_q *next;  
 302};  
 303  
 304struct tx_buf_desc {  
 305        unsigned short desc_mode;  
 306        unsigned short vc_index;  
 307        unsigned short res1;            /* reserved field */  
 308        unsigned short bytes;  
 309        unsigned short buf_start_hi;  
 310        unsigned short buf_start_lo;  
 311        unsigned short res2[10];        /* reserved field */  
 312};  
 313          
 314  
 315struct rx_buf_desc { 
 316        unsigned short desc_mode;
 317        unsigned short vc_index;
 318        unsigned short vpi; 
 319        unsigned short bytes; 
 320        unsigned short buf_start_hi;  
 321        unsigned short buf_start_lo;  
 322        unsigned short dma_start_hi;  
 323        unsigned short dma_start_lo;  
 324        unsigned short crc_upper;  
 325        unsigned short crc_lower;  
 326        unsigned short res:8, timeout:8;  
 327        unsigned short res2[5]; /* reserved field */  
 328};  
 329  
 330/*--------SAR stuff ---------------------*/  
 331  
 332#define EPROM_SIZE 0x40000      /* says 64K in the docs ??? */  
 333#define MAC1_LEN        4                                                 
 334#define MAC2_LEN        2  
 335   
 336/*------------ PCI Memory Space Map, 128K SAR memory ----------------*/  
 337#define IPHASE5575_PCI_CONFIG_REG_BASE  0x0000  
 338#define IPHASE5575_BUS_CONTROL_REG_BASE 0x1000  /* offsets 0x00 - 0x3c */  
 339#define IPHASE5575_FRAG_CONTROL_REG_BASE 0x2000  
 340#define IPHASE5575_REASS_CONTROL_REG_BASE 0x3000  
 341#define IPHASE5575_DMA_CONTROL_REG_BASE 0x4000  
 342#define IPHASE5575_FRONT_END_REG_BASE IPHASE5575_DMA_CONTROL_REG_BASE  
 343#define IPHASE5575_FRAG_CONTROL_RAM_BASE 0x10000  
 344#define IPHASE5575_REASS_CONTROL_RAM_BASE 0x20000  
 345  
 346/*------------ Bus interface control registers -----------------*/  
 347#define IPHASE5575_BUS_CONTROL_REG      0x00  
 348#define IPHASE5575_BUS_STATUS_REG       0x01    /* actual offset 0x04 */  
 349#define IPHASE5575_MAC1                 0x02  
 350#define IPHASE5575_REV                  0x03  
 351#define IPHASE5575_MAC2                 0x03    /*actual offset 0x0e-reg 0x0c*/  
 352#define IPHASE5575_EXT_RESET            0x04  
 353#define IPHASE5575_INT_RESET            0x05    /* addr 1c ?? reg 0x06 */  
 354#define IPHASE5575_PCI_ADDR_PAGE        0x07    /* reg 0x08, 0x09 ?? */  
 355#define IPHASE5575_EEPROM_ACCESS        0x0a    /* actual offset 0x28 */  
 356#define IPHASE5575_CELL_FIFO_QUEUE_SZ   0x0b  
 357#define IPHASE5575_CELL_FIFO_MARK_STATE 0x0c  
 358#define IPHASE5575_CELL_FIFO_READ_PTR   0x0d  
 359#define IPHASE5575_CELL_FIFO_WRITE_PTR  0x0e  
 360#define IPHASE5575_CELL_FIFO_CELLS_AVL  0x0f    /* actual offset 0x3c */  
 361  
 362/* Bus Interface Control Register bits */  
 363#define CTRL_FE_RST     0x80000000  
 364#define CTRL_LED        0x40000000  
 365#define CTRL_25MBPHY    0x10000000  
 366#define CTRL_ENCMBMEM   0x08000000  
 367#define CTRL_ENOFFSEG   0x01000000  
 368#define CTRL_ERRMASK    0x00400000  
 369#define CTRL_DLETMASK   0x00100000  
 370#define CTRL_DLERMASK   0x00080000  
 371#define CTRL_FEMASK     0x00040000  
 372#define CTRL_SEGMASK    0x00020000  
 373#define CTRL_REASSMASK  0x00010000  
 374#define CTRL_CSPREEMPT  0x00002000  
 375#define CTRL_B128       0x00000200  
 376#define CTRL_B64        0x00000100  
 377#define CTRL_B48        0x00000080  
 378#define CTRL_B32        0x00000040  
 379#define CTRL_B16        0x00000020  
 380#define CTRL_B8         0x00000010  
 381  
 382/* Bus Interface Status Register bits */  
 383#define STAT_CMEMSIZ    0xc0000000  
 384#define STAT_ADPARCK    0x20000000  
 385#define STAT_RESVD      0x1fffff80  
 386#define STAT_ERRINT     0x00000040  
 387#define STAT_MARKINT    0x00000020  
 388#define STAT_DLETINT    0x00000010  
 389#define STAT_DLERINT    0x00000008  
 390#define STAT_FEINT      0x00000004  
 391#define STAT_SEGINT     0x00000002  
 392#define STAT_REASSINT   0x00000001  
 393  
 394  
 395/*--------------- Segmentation control registers -----------------*/  
 396/* The segmentation registers are 16 bits access and the addresses  
 397        are defined as such so the addresses are the actual "offsets" */  
 398#define IDLEHEADHI      0x00  
 399#define IDLEHEADLO      0x01  
 400#define MAXRATE         0x02  
 401/* Values for MAXRATE register for 155Mbps and 25.6 Mbps operation */  
 402#define RATE155         0x64b1 // 16 bits float format 
 403#define MAX_ATM_155     352768 // Cells/second p.118
 404#define RATE25          0x5f9d  
 405  
 406#define STPARMS         0x03  
 407#define STPARMS_1K      0x008c  
 408#define STPARMS_2K      0x0049  
 409#define STPARMS_4K      0x0026  
 410#define COMP_EN         0x4000  
 411#define CBR_EN          0x2000  
 412#define ABR_EN          0x0800  
 413#define UBR_EN          0x0400  
 414  
 415#define ABRUBR_ARB      0x04  
 416#define RM_TYPE         0x05  
 417/*Value for RM_TYPE register for ATM Forum Traffic Mangement4.0 support*/  
 418#define RM_TYPE_4_0     0x0100  
 419  
 420#define SEG_COMMAND_REG         0x17  
 421/* Values for the command register */  
 422#define RESET_SEG 0x0055  
 423#define RESET_SEG_STATE 0x00aa  
 424#define RESET_TX_CELL_CTR 0x00cc  
 425  
 426#define CBR_PTR_BASE    0x20  
 427#define ABR_SBPTR_BASE  0x22  
 428#define UBR_SBPTR_BASE  0x23  
 429#define ABRWQ_BASE      0x26  
 430#define UBRWQ_BASE      0x27  
 431#define VCT_BASE        0x28  
 432#define VCTE_BASE       0x29  
 433#define CBR_TAB_BEG     0x2c  
 434#define CBR_TAB_END     0x2d  
 435#define PRQ_ST_ADR      0x30  
 436#define PRQ_ED_ADR      0x31  
 437#define PRQ_RD_PTR      0x32  
 438#define PRQ_WR_PTR      0x33  
 439#define TCQ_ST_ADR      0x34  
 440#define TCQ_ED_ADR      0x35  
 441#define TCQ_RD_PTR      0x36  
 442#define TCQ_WR_PTR      0x37  
 443#define SEG_QUEUE_BASE  0x40  
 444#define SEG_DESC_BASE   0x41  
 445#define MODE_REG_0      0x45  
 446#define T_ONLINE        0x0002          /* (i)chipSAR is online */  
 447  
 448#define MODE_REG_1      0x46  
 449#define MODE_REG_1_VAL  0x0400          /*for propoer device operation*/  
 450  
 451#define SEG_INTR_STATUS_REG 0x47  
 452#define SEG_MASK_REG    0x48  
 453#define TRANSMIT_DONE 0x0200
 454#define TCQ_NOT_EMPTY 0x1000    /* this can be used for both the interrupt   
 455                                status registers as well as the mask register */  
 456  
 457#define CELL_CTR_HIGH_AUTO 0x49  
 458#define CELL_CTR_HIGH_NOAUTO 0xc9  
 459#define CELL_CTR_LO_AUTO 0x4a  
 460#define CELL_CTR_LO_NOAUTO 0xca  
 461  
 462/* Diagnostic registers */  
 463#define NEXTDESC        0x59  
 464#define NEXTVC          0x5a  
 465#define PSLOTCNT        0x5d  
 466#define NEWDN           0x6a  
 467#define NEWVC           0x6b  
 468#define SBPTR           0x6c  
 469#define ABRWQ_WRPTR     0x6f  
 470#define ABRWQ_RDPTR     0x70  
 471#define UBRWQ_WRPTR     0x71  
 472#define UBRWQ_RDPTR     0x72  
 473#define CBR_VC          0x73  
 474#define ABR_SBVC        0x75  
 475#define UBR_SBVC        0x76  
 476#define ABRNEXTLINK     0x78  
 477#define UBRNEXTLINK     0x79  
 478  
 479  
 480/*----------------- Reassembly control registers ---------------------*/  
 481/* The reassembly registers are 16 bits access and the addresses  
 482        are defined as such so the addresses are the actual "offsets" */  
 483#define MODE_REG        0x00  
 484#define R_ONLINE        0x0002          /* (i)chip is online */  
 485#define IGN_RAW_FL      0x0004
 486  
 487#define PROTOCOL_ID     0x01  
 488#define REASS_MASK_REG  0x02  
 489#define REASS_INTR_STATUS_REG   0x03  
 490/* Interrupt Status register bits */  
 491#define RX_PKT_CTR_OF   0x8000  
 492#define RX_ERR_CTR_OF   0x4000  
 493#define RX_CELL_CTR_OF  0x1000  
 494#define RX_FREEQ_EMPT   0x0200  
 495#define RX_EXCPQ_FL     0x0080  
 496#define RX_RAWQ_FL      0x0010  
 497#define RX_EXCP_RCVD    0x0008  
 498#define RX_PKT_RCVD     0x0004  
 499#define RX_RAW_RCVD     0x0001  
 500  
 501#define DRP_PKT_CNTR    0x04  
 502#define ERR_CNTR        0x05  
 503#define RAW_BASE_ADR    0x08  
 504#define CELL_CTR0       0x0c  
 505#define CELL_CTR1       0x0d  
 506#define REASS_COMMAND_REG       0x0f  
 507/* Values for command register */  
 508#define RESET_REASS     0x0055  
 509#define RESET_REASS_STATE 0x00aa  
 510#define RESET_DRP_PKT_CNTR 0x00f1  
 511#define RESET_ERR_CNTR  0x00f2  
 512#define RESET_CELL_CNTR 0x00f8  
 513#define RESET_REASS_ALL_REGS 0x00ff  
 514  
 515#define REASS_DESC_BASE 0x10  
 516#define VC_LKUP_BASE    0x11  
 517#define REASS_TABLE_BASE 0x12  
 518#define REASS_QUEUE_BASE 0x13  
 519#define PKT_TM_CNT      0x16  
 520#define TMOUT_RANGE     0x17  
 521#define INTRVL_CNTR     0x18  
 522#define TMOUT_INDX      0x19  
 523#define VP_LKUP_BASE    0x1c  
 524#define VP_FILTER       0x1d  
 525#define ABR_LKUP_BASE   0x1e  
 526#define FREEQ_ST_ADR    0x24  
 527#define FREEQ_ED_ADR    0x25  
 528#define FREEQ_RD_PTR    0x26  
 529#define FREEQ_WR_PTR    0x27  
 530#define PCQ_ST_ADR      0x28  
 531#define PCQ_ED_ADR      0x29  
 532#define PCQ_RD_PTR      0x2a  
 533#define PCQ_WR_PTR      0x2b  
 534#define EXCP_Q_ST_ADR   0x2c  
 535#define EXCP_Q_ED_ADR   0x2d  
 536#define EXCP_Q_RD_PTR   0x2e  
 537#define EXCP_Q_WR_PTR   0x2f  
 538#define CC_FIFO_ST_ADR  0x34  
 539#define CC_FIFO_ED_ADR  0x35  
 540#define CC_FIFO_RD_PTR  0x36  
 541#define CC_FIFO_WR_PTR  0x37  
 542#define STATE_REG       0x38  
 543#define BUF_SIZE        0x42  
 544#define XTRA_RM_OFFSET  0x44  
 545#define DRP_PKT_CNTR_NC 0x84  
 546#define ERR_CNTR_NC     0x85  
 547#define CELL_CNTR0_NC   0x8c  
 548#define CELL_CNTR1_NC   0x8d  
 549  
 550/* State Register bits */  
 551#define EXCPQ_EMPTY     0x0040  
 552#define PCQ_EMPTY       0x0010  
 553#define FREEQ_EMPTY     0x0004  
 554  
 555  
 556/*----------------- Front End registers/ DMA control --------------*/  
 557/* There is a lot of documentation error regarding these offsets ???   
 558        eg:- 2 offsets given 800, a00 for rx counter  
 559        similarly many others  
 560   Remember again that the offsets are to be 4*register number, so  
 561        correct the #defines here   
 562*/  
 563#define IPHASE5575_TX_COUNTER           0x200   /* offset - 0x800 */  
 564#define IPHASE5575_RX_COUNTER           0x280   /* offset - 0xa00 */  
 565#define IPHASE5575_TX_LIST_ADDR         0x300   /* offset - 0xc00 */  
 566#define IPHASE5575_RX_LIST_ADDR         0x380   /* offset - 0xe00 */  
 567  
 568/*--------------------------- RAM ---------------------------*/  
 569/* These memory maps are actually offsets from the segmentation and reassembly  RAM base addresses */  
 570  
 571/* Segmentation Control Memory map */  
 572#define TX_DESC_BASE    0x0000  /* Buffer Decriptor Table */  
 573#define TX_COMP_Q       0x1000  /* Transmit Complete Queue */  
 574#define PKT_RDY_Q       0x1400  /* Packet Ready Queue */  
 575#define CBR_SCHED_TABLE 0x1800  /* CBR Table */  
 576#define UBR_SCHED_TABLE 0x3000  /* UBR Table */  
 577#define UBR_WAIT_Q      0x4000  /* UBR Wait Queue */  
 578#define ABR_SCHED_TABLE 0x5000  /* ABR Table */  
 579#define ABR_WAIT_Q      0x5800  /* ABR Wait Queue */  
 580#define EXT_VC_TABLE    0x6000  /* Extended VC Table */  
 581#define MAIN_VC_TABLE   0x8000  /* Main VC Table */  
 582#define SCHEDSZ         1024    /* ABR and UBR Scheduling Table size */  
 583#define TX_DESC_TABLE_SZ 128    /* Number of entries in the Transmit   
 584                                        Buffer Descriptor Table */  
 585  
 586/* These are used as table offsets in Descriptor Table address generation */  
 587#define DESC_MODE       0x0  
 588#define VC_INDEX        0x1  
 589#define BYTE_CNT        0x3  
 590#define PKT_START_HI    0x4  
 591#define PKT_START_LO    0x5  
 592  
 593/* Descriptor Mode Word Bits */  
 594#define EOM_EN  0x0800  
 595#define AAL5    0x0100  
 596#define APP_CRC32 0x0400  
 597#define CMPL_INT  0x1000
 598  
 599#define TABLE_ADDRESS(db, dn, to) \
 600        (((unsigned long)(db & 0x04)) << 16) | (dn << 5) | (to << 1)  
 601  
 602/* Reassembly Control Memory Map */  
 603#define RX_DESC_BASE    0x0000  /* Buffer Descriptor Table */  
 604#define VP_TABLE        0x5c00  /* VP Table */  
 605#define EXCEPTION_Q     0x5e00  /* Exception Queue */  
 606#define FREE_BUF_DESC_Q 0x6000  /* Free Buffer Descriptor Queue */  
 607#define PKT_COMP_Q      0x6800  /* Packet Complete Queue */  
 608#define REASS_TABLE     0x7000  /* Reassembly Table */  
 609#define RX_VC_TABLE     0x7800  /* VC Table */  
 610#define ABR_VC_TABLE    0x8000  /* ABR VC Table */  
 611#define RX_DESC_TABLE_SZ 736    /* Number of entries in the Receive   
 612                                        Buffer Descriptor Table */  
 613#define VP_TABLE_SZ     256      /* Number of entries in VPTable */   
 614#define RX_VC_TABLE_SZ  1024    /* Number of entries in VC Table */   
 615#define REASS_TABLE_SZ  1024    /* Number of entries in Reassembly Table */  
 616 /* Buffer Descriptor Table */  
 617#define RX_ACT  0x8000  
 618#define RX_VPVC 0x4000  
 619#define RX_CNG  0x0040  
 620#define RX_CER  0x0008  
 621#define RX_PTE  0x0004  
 622#define RX_OFL  0x0002  
 623#define NUM_RX_EXCP   32
 624
 625/* Reassembly Table */  
 626#define NO_AAL5_PKT     0x0000  
 627#define AAL5_PKT_REASSEMBLED 0x4000  
 628#define AAL5_PKT_TERMINATED 0x8000  
 629#define RAW_PKT         0xc000  
 630#define REASS_ABR       0x2000  
 631  
 632/*-------------------- Base Registers --------------------*/  
 633#define REG_BASE IPHASE5575_BUS_CONTROL_REG_BASE  
 634#define RAM_BASE IPHASE5575_FRAG_CONTROL_RAM_BASE  
 635#define PHY_BASE IPHASE5575_FRONT_END_REG_BASE  
 636#define SEG_BASE IPHASE5575_FRAG_CONTROL_REG_BASE  
 637#define REASS_BASE IPHASE5575_REASS_CONTROL_REG_BASE  
 638
 639typedef volatile u_int  freg_t;
 640typedef u_int   rreg_t;
 641
 642typedef struct _ffredn_t {
 643        freg_t  idlehead_high;  /* Idle cell header (high)              */
 644        freg_t  idlehead_low;   /* Idle cell header (low)               */
 645        freg_t  maxrate;        /* Maximum rate                         */
 646        freg_t  stparms;        /* Traffic Management Parameters        */
 647        freg_t  abrubr_abr;     /* ABRUBR Priority Byte 1, TCR Byte 0   */
 648        freg_t  rm_type;        /*                                      */
 649        u_int   filler5[0x17 - 0x06];
 650        freg_t  cmd_reg;        /* Command register                     */
 651        u_int   filler18[0x20 - 0x18];
 652        freg_t  cbr_base;       /* CBR Pointer Base                     */
 653        freg_t  vbr_base;       /* VBR Pointer Base                     */
 654        freg_t  abr_base;       /* ABR Pointer Base                     */
 655        freg_t  ubr_base;       /* UBR Pointer Base                     */
 656        u_int   filler24;
 657        freg_t  vbrwq_base;     /* VBR Wait Queue Base                  */
 658        freg_t  abrwq_base;     /* ABR Wait Queue Base                  */
 659        freg_t  ubrwq_base;     /* UBR Wait Queue Base                  */
 660        freg_t  vct_base;       /* Main VC Table Base                   */
 661        freg_t  vcte_base;      /* Extended Main VC Table Base          */
 662        u_int   filler2a[0x2C - 0x2A];
 663        freg_t  cbr_tab_beg;    /* CBR Table Begin                      */
 664        freg_t  cbr_tab_end;    /* CBR Table End                        */
 665        freg_t  cbr_pointer;    /* CBR Pointer                          */
 666        u_int   filler2f[0x30 - 0x2F];
 667        freg_t  prq_st_adr;     /* Packet Ready Queue Start Address     */
 668        freg_t  prq_ed_adr;     /* Packet Ready Queue End Address       */
 669        freg_t  prq_rd_ptr;     /* Packet Ready Queue read pointer      */
 670        freg_t  prq_wr_ptr;     /* Packet Ready Queue write pointer     */
 671        freg_t  tcq_st_adr;     /* Transmit Complete Queue Start Address*/
 672        freg_t  tcq_ed_adr;     /* Transmit Complete Queue End Address  */
 673        freg_t  tcq_rd_ptr;     /* Transmit Complete Queue read pointer */
 674        freg_t  tcq_wr_ptr;     /* Transmit Complete Queue write pointer*/
 675        u_int   filler38[0x40 - 0x38];
 676        freg_t  queue_base;     /* Base address for PRQ and TCQ         */
 677        freg_t  desc_base;      /* Base address of descriptor table     */
 678        u_int   filler42[0x45 - 0x42];
 679        freg_t  mode_reg_0;     /* Mode register 0                      */
 680        freg_t  mode_reg_1;     /* Mode register 1                      */
 681        freg_t  intr_status_reg;/* Interrupt Status register            */
 682        freg_t  mask_reg;       /* Mask Register                        */
 683        freg_t  cell_ctr_high1; /* Total cell transfer count (high)     */
 684        freg_t  cell_ctr_lo1;   /* Total cell transfer count (low)      */
 685        freg_t  state_reg;      /* Status register                      */
 686        u_int   filler4c[0x58 - 0x4c];
 687        freg_t  curr_desc_num;  /* Contains the current descriptor num  */
 688        freg_t  next_desc;      /* Next descriptor                      */
 689        freg_t  next_vc;        /* Next VC                              */
 690        u_int   filler5b[0x5d - 0x5b];
 691        freg_t  present_slot_cnt;/* Present slot count                  */
 692        u_int   filler5e[0x6a - 0x5e];
 693        freg_t  new_desc_num;   /* New descriptor number                */
 694        freg_t  new_vc;         /* New VC                               */
 695        freg_t  sched_tbl_ptr;  /* Schedule table pointer               */
 696        freg_t  vbrwq_wptr;     /* VBR wait queue write pointer         */
 697        freg_t  vbrwq_rptr;     /* VBR wait queue read pointer          */
 698        freg_t  abrwq_wptr;     /* ABR wait queue write pointer         */
 699        freg_t  abrwq_rptr;     /* ABR wait queue read pointer          */
 700        freg_t  ubrwq_wptr;     /* UBR wait queue write pointer         */
 701        freg_t  ubrwq_rptr;     /* UBR wait queue read pointer          */
 702        freg_t  cbr_vc;         /* CBR VC                               */
 703        freg_t  vbr_sb_vc;      /* VBR SB VC                            */
 704        freg_t  abr_sb_vc;      /* ABR SB VC                            */
 705        freg_t  ubr_sb_vc;      /* UBR SB VC                            */
 706        freg_t  vbr_next_link;  /* VBR next link                        */
 707        freg_t  abr_next_link;  /* ABR next link                        */
 708        freg_t  ubr_next_link;  /* UBR next link                        */
 709        u_int   filler7a[0x7c-0x7a];
 710        freg_t  out_rate_head;  /* Out of rate head                     */
 711        u_int   filler7d[0xca-0x7d]; /* pad out to full address space   */
 712        freg_t  cell_ctr_high1_nc;/* Total cell transfer count (high)   */
 713        freg_t  cell_ctr_lo1_nc;/* Total cell transfer count (low)      */
 714        u_int   fillercc[0x100-0xcc]; /* pad out to full address space   */
 715} ffredn_t;
 716
 717typedef struct _rfredn_t {
 718        rreg_t  mode_reg_0;     /* Mode register 0                      */
 719        rreg_t  protocol_id;    /* Protocol ID                          */
 720        rreg_t  mask_reg;       /* Mask Register                        */
 721        rreg_t  intr_status_reg;/* Interrupt status register            */
 722        rreg_t  drp_pkt_cntr;   /* Dropped packet cntr (clear on read)  */
 723        rreg_t  err_cntr;       /* Error Counter (cleared on read)      */
 724        u_int   filler6[0x08 - 0x06];
 725        rreg_t  raw_base_adr;   /* Base addr for raw cell Q             */
 726        u_int   filler2[0x0c - 0x09];
 727        rreg_t  cell_ctr0;      /* Cell Counter 0 (cleared when read)   */
 728        rreg_t  cell_ctr1;      /* Cell Counter 1 (cleared when read)   */
 729        u_int   filler3[0x0f - 0x0e];
 730        rreg_t  cmd_reg;        /* Command register                     */
 731        rreg_t  desc_base;      /* Base address for description table   */
 732        rreg_t  vc_lkup_base;   /* Base address for VC lookup table     */
 733        rreg_t  reass_base;     /* Base address for reassembler table   */
 734        rreg_t  queue_base;     /* Base address for Communication queue */
 735        u_int   filler14[0x16 - 0x14];
 736        rreg_t  pkt_tm_cnt;     /* Packet Timeout and count register    */
 737        rreg_t  tmout_range;    /* Range of reassembley IDs for timeout */
 738        rreg_t  intrvl_cntr;    /* Packet aging interval counter        */
 739        rreg_t  tmout_indx;     /* index of pkt being tested for aging  */
 740        u_int   filler1a[0x1c - 0x1a];
 741        rreg_t  vp_lkup_base;   /* Base address for VP lookup table     */
 742        rreg_t  vp_filter;      /* VP filter register                   */
 743        rreg_t  abr_lkup_base;  /* Base address of ABR VC Table         */
 744        u_int   filler1f[0x24 - 0x1f];
 745        rreg_t  fdq_st_adr;     /* Free desc queue start address        */
 746        rreg_t  fdq_ed_adr;     /* Free desc queue end address          */
 747        rreg_t  fdq_rd_ptr;     /* Free desc queue read pointer         */
 748        rreg_t  fdq_wr_ptr;     /* Free desc queue write pointer        */
 749        rreg_t  pcq_st_adr;     /* Packet Complete queue start address  */
 750        rreg_t  pcq_ed_adr;     /* Packet Complete queue end address    */
 751        rreg_t  pcq_rd_ptr;     /* Packet Complete queue read pointer   */
 752        rreg_t  pcq_wr_ptr;     /* Packet Complete queue write pointer  */
 753        rreg_t  excp_st_adr;    /* Exception queue start address        */
 754        rreg_t  excp_ed_adr;    /* Exception queue end address          */
 755        rreg_t  excp_rd_ptr;    /* Exception queue read pointer         */
 756        rreg_t  excp_wr_ptr;    /* Exception queue write pointer        */
 757        u_int   filler30[0x34 - 0x30];
 758        rreg_t  raw_st_adr;     /* Raw Cell start address               */
 759        rreg_t  raw_ed_adr;     /* Raw Cell end address                 */
 760        rreg_t  raw_rd_ptr;     /* Raw Cell read pointer                */
 761        rreg_t  raw_wr_ptr;     /* Raw Cell write pointer               */
 762        rreg_t  state_reg;      /* State Register                       */
 763        u_int   filler39[0x42 - 0x39];
 764        rreg_t  buf_size;       /* Buffer size                          */
 765        u_int   filler43;
 766        rreg_t  xtra_rm_offset; /* Offset of the additional turnaround RM */
 767        u_int   filler45[0x84 - 0x45];
 768        rreg_t  drp_pkt_cntr_nc;/* Dropped Packet cntr, Not clear on rd */
 769        rreg_t  err_cntr_nc;    /* Error Counter, Not clear on read     */
 770        u_int   filler86[0x8c - 0x86];
 771        rreg_t  cell_ctr0_nc;   /* Cell Counter 0,  Not clear on read   */
 772        rreg_t  cell_ctr1_nc;   /* Cell Counter 1, Not clear on read    */
 773        u_int   filler8e[0x100-0x8e]; /* pad out to full address space   */
 774} rfredn_t;
 775
 776typedef struct {
 777        /* Atlantic */
 778        ffredn_t        ffredn;         /* F FRED                       */
 779        rfredn_t        rfredn;         /* R FRED                       */
 780} ia_regs_t;
 781
 782typedef struct {
 783        u_short         f_vc_type;      /* VC type              */
 784        u_short         f_nrm;          /* Nrm                  */
 785        u_short         f_nrmexp;       /* Nrm Exp              */
 786        u_short         reserved6;      /*                      */
 787        u_short         f_crm;          /* Crm                  */
 788        u_short         reserved10;     /* Reserved             */
 789        u_short         reserved12;     /* Reserved             */
 790        u_short         reserved14;     /* Reserved             */
 791        u_short         last_cell_slot; /* last_cell_slot_count */
 792        u_short         f_pcr;          /* Peak Cell Rate       */
 793        u_short         fraction;       /* fraction             */
 794        u_short         f_icr;          /* Initial Cell Rate    */
 795        u_short         f_cdf;          /* */
 796        u_short         f_mcr;          /* Minimum Cell Rate    */
 797        u_short         f_acr;          /* Allowed Cell Rate    */
 798        u_short         f_status;       /* */
 799} f_vc_abr_entry;
 800
 801typedef struct {
 802        u_short         r_status_rdf;   /* status + RDF         */
 803        u_short         r_air;          /* AIR                  */
 804        u_short         reserved4[14];  /* Reserved             */
 805} r_vc_abr_entry;   
 806
 807#define MRM 3
 808
 809typedef struct srv_cls_param {
 810        u32 class_type;         /* CBR/VBR/ABR/UBR; use the enum above */
 811        u32 pcr;                /* Peak Cell Rate (24-bit) */ 
 812        /* VBR parameters */
 813        u32 scr;                /* sustainable cell rate */
 814        u32 max_burst_size;     /* ?? cell rate or data rate */
 815 
 816        /* ABR only UNI 4.0 Parameters */
 817        u32 mcr;                /* Min Cell Rate (24-bit) */
 818        u32 icr;                /* Initial Cell Rate (24-bit) */
 819        u32 tbe;                /* Transient Buffer Exposure (24-bit) */
 820        u32 frtt;               /* Fixed Round Trip Time (24-bit) */
 821 
 822#if 0   /* Additional Parameters of TM 4.0 */
 823bits  31          30           29          28       27-25 24-22 21-19  18-9
 824-----------------------------------------------------------------------------
 825| NRM present | TRM prsnt | CDF prsnt | ADTF prsnt | NRM | TRM | CDF | ADTF |
 826-----------------------------------------------------------------------------
 827#endif /* 0 */
 828 
 829        u8 nrm;                 /* Max # of Cells for each forward RM
 830                                        cell (3-bit) */
 831        u8 trm;                 /* Time between forward RM cells (3-bit) */
 832        u16 adtf;               /* ACR Decrease Time Factor (10-bit) */
 833        u8 cdf;                 /* Cutoff Decrease Factor (3-bit) */
 834        u8 rif;                 /* Rate Increment Factor (4-bit) */
 835        u8 rdf;                 /* Rate Decrease Factor (4-bit) */
 836        u8 reserved;            /* 8 bits to keep structure word aligned */
 837} srv_cls_param_t;
 838
 839struct testTable_t {
 840        u16 lastTime; 
 841        u16 fract; 
 842        u8 vc_status;
 843}; 
 844
 845typedef struct {
 846        u16 vci;
 847        u16 error;
 848} RX_ERROR_Q;
 849
 850typedef struct {
 851        u8 active: 1; 
 852        u8 abr: 1; 
 853        u8 ubr: 1; 
 854        u8 cnt: 5;
 855#define VC_ACTIVE       0x01
 856#define VC_ABR          0x02
 857#define VC_UBR          0x04
 858} vcstatus_t;
 859  
 860struct ia_rfL_t {
 861        u32  fdq_st;     /* Free desc queue start address        */
 862        u32  fdq_ed;     /* Free desc queue end address          */
 863        u32  fdq_rd;     /* Free desc queue read pointer         */
 864        u32  fdq_wr;     /* Free desc queue write pointer        */
 865        u32  pcq_st;     /* Packet Complete queue start address  */
 866        u32  pcq_ed;     /* Packet Complete queue end address    */
 867        u32  pcq_rd;     /* Packet Complete queue read pointer   */
 868        u32  pcq_wr;     /* Packet Complete queue write pointer  */ 
 869};
 870
 871struct ia_ffL_t {
 872        u32  prq_st;     /* Packet Ready Queue Start Address     */
 873        u32  prq_ed;     /* Packet Ready Queue End Address       */
 874        u32  prq_wr;     /* Packet Ready Queue write pointer     */
 875        u32  tcq_st;     /* Transmit Complete Queue Start Address*/
 876        u32  tcq_ed;     /* Transmit Complete Queue End Address  */
 877        u32  tcq_rd;     /* Transmit Complete Queue read pointer */
 878};
 879
 880struct desc_tbl_t {
 881        u32 timestamp;
 882        struct ia_vcc *iavcc;
 883        struct sk_buff *txskb;
 884}; 
 885
 886typedef struct ia_rtn_q {
 887   struct desc_tbl_t data;
 888   struct ia_rtn_q *next, *tail;
 889} IARTN_Q;
 890
 891#define SUNI_LOSV       0x04
 892enum ia_suni {
 893        SUNI_MASTER_RESET       = 0x000, /* SUNI Master Reset and Identity   */
 894        SUNI_MASTER_CONFIG      = 0x004, /* SUNI Master Configuration        */
 895        SUNI_MASTER_INTR_STAT   = 0x008, /* SUNI Master Interrupt Status     */
 896        SUNI_RESERVED1          = 0x00c, /* Reserved                         */
 897        SUNI_MASTER_CLK_MONITOR = 0x010, /* SUNI Master Clock Monitor        */
 898        SUNI_MASTER_CONTROL     = 0x014, /* SUNI Master Clock Monitor        */
 899                                         /* Reserved (10)                    */
 900        SUNI_RSOP_CONTROL       = 0x040, /* RSOP Control/Interrupt Enable    */
 901        SUNI_RSOP_STATUS        = 0x044, /* RSOP Status/Interrupt States     */
 902        SUNI_RSOP_SECTION_BIP8L = 0x048, /* RSOP Section BIP-8 LSB           */
 903        SUNI_RSOP_SECTION_BIP8M = 0x04c, /* RSOP Section BIP-8 MSB           */
 904
 905        SUNI_TSOP_CONTROL       = 0x050, /* TSOP Control                     */
 906        SUNI_TSOP_DIAG          = 0x054, /* TSOP Disgnostics                 */
 907                                         /* Reserved (2)                     */
 908        SUNI_RLOP_CS            = 0x060, /* RLOP Control/Status              */
 909        SUNI_RLOP_INTR          = 0x064, /* RLOP Interrupt Enable/Status     */
 910        SUNI_RLOP_LINE_BIP24L   = 0x068, /* RLOP Line BIP-24 LSB             */
 911        SUNI_RLOP_LINE_BIP24    = 0x06c, /* RLOP Line BIP-24                 */
 912        SUNI_RLOP_LINE_BIP24M   = 0x070, /* RLOP Line BIP-24 MSB             */
 913        SUNI_RLOP_LINE_FEBEL    = 0x074, /* RLOP Line FEBE LSB               */
 914        SUNI_RLOP_LINE_FEBE     = 0x078, /* RLOP Line FEBE                   */
 915        SUNI_RLOP_LINE_FEBEM    = 0x07c, /* RLOP Line FEBE MSB               */
 916
 917        SUNI_TLOP_CONTROL       = 0x080, /* TLOP Control                     */
 918        SUNI_TLOP_DISG          = 0x084, /* TLOP Disgnostics                 */
 919                                         /* Reserved (14)                    */
 920        SUNI_RPOP_CS            = 0x0c0, /* RPOP Status/Control              */
 921        SUNI_RPOP_INTR          = 0x0c4, /* RPOP Interrupt/Status            */
 922        SUNI_RPOP_RESERVED      = 0x0c8, /* RPOP Reserved                    */
 923        SUNI_RPOP_INTR_ENA      = 0x0cc, /* RPOP Interrupt Enable            */
 924                                         /* Reserved (3)                     */
 925        SUNI_RPOP_PATH_SIG      = 0x0dc, /* RPOP Path Signal Label           */
 926        SUNI_RPOP_BIP8L         = 0x0e0, /* RPOP Path BIP-8 LSB              */
 927        SUNI_RPOP_BIP8M         = 0x0e4, /* RPOP Path BIP-8 MSB              */
 928        SUNI_RPOP_FEBEL         = 0x0e8, /* RPOP Path FEBE LSB               */
 929        SUNI_RPOP_FEBEM         = 0x0ec, /* RPOP Path FEBE MSB               */
 930                                         /* Reserved (4)                     */
 931        SUNI_TPOP_CNTRL_DAIG    = 0x100, /* TPOP Control/Disgnostics         */
 932        SUNI_TPOP_POINTER_CTRL  = 0x104, /* TPOP Pointer Control             */
 933        SUNI_TPOP_SOURCER_CTRL  = 0x108, /* TPOP Source Control              */
 934                                         /* Reserved (2)                     */
 935        SUNI_TPOP_ARB_PRTL      = 0x114, /* TPOP Arbitrary Pointer LSB       */
 936        SUNI_TPOP_ARB_PRTM      = 0x118, /* TPOP Arbitrary Pointer MSB       */
 937        SUNI_TPOP_RESERVED2     = 0x11c, /* TPOP Reserved                    */
 938        SUNI_TPOP_PATH_SIG      = 0x120, /* TPOP Path Signal Lable           */
 939        SUNI_TPOP_PATH_STATUS   = 0x124, /* TPOP Path Status                 */
 940                                         /* Reserved (6)                     */
 941        SUNI_RACP_CS            = 0x140, /* RACP Control/Status              */
 942        SUNI_RACP_INTR          = 0x144, /* RACP Interrupt Enable/Status     */
 943        SUNI_RACP_HDR_PATTERN   = 0x148, /* RACP Match Header Pattern        */
 944        SUNI_RACP_HDR_MASK      = 0x14c, /* RACP Match Header Mask           */
 945        SUNI_RACP_CORR_HCS      = 0x150, /* RACP Correctable HCS Error Count */
 946        SUNI_RACP_UNCORR_HCS    = 0x154, /* RACP Uncorrectable HCS Err Count */
 947                                         /* Reserved (10)                    */
 948        SUNI_TACP_CONTROL       = 0x180, /* TACP Control                     */
 949        SUNI_TACP_IDLE_HDR_PAT  = 0x184, /* TACP Idle Cell Header Pattern    */
 950        SUNI_TACP_IDLE_PAY_PAY  = 0x188, /* TACP Idle Cell Payld Octet Patrn */
 951                                         /* Reserved (5)                     */
 952                                         /* Reserved (24)                    */
 953        /* FIXME: unused but name conflicts.
 954         * SUNI_MASTER_TEST     = 0x200,    SUNI Master Test                 */
 955        SUNI_RESERVED_TEST      = 0x204  /* SUNI Reserved for Test           */
 956};
 957
 958typedef struct _SUNI_STATS_
 959{
 960   u32 valid;                       // 1 = oc3 PHY card
 961   u32 carrier_detect;              // GPIN input
 962   // RSOP: receive section overhead processor
 963   u16 rsop_oof_state;              // 1 = out of frame
 964   u16 rsop_lof_state;              // 1 = loss of frame
 965   u16 rsop_los_state;              // 1 = loss of signal
 966   u32 rsop_los_count;              // loss of signal count
 967   u32 rsop_bse_count;              // section BIP-8 error count
 968   // RLOP: receive line overhead processor
 969   u16 rlop_ferf_state;             // 1 = far end receive failure
 970   u16 rlop_lais_state;             // 1 = line AIS
 971   u32 rlop_lbe_count;              // BIP-24 count
 972   u32 rlop_febe_count;             // FEBE count;
 973   // RPOP: receive path overhead processor
 974   u16 rpop_lop_state;              // 1 = LOP
 975   u16 rpop_pais_state;             // 1 = path AIS
 976   u16 rpop_pyel_state;             // 1 = path yellow alert
 977   u32 rpop_bip_count;              // path BIP-8 error count
 978   u32 rpop_febe_count;             // path FEBE error count
 979   u16 rpop_psig;                   // path signal label value
 980   // RACP: receive ATM cell processor
 981   u16 racp_hp_state;               // hunt/presync state
 982   u32 racp_fu_count;               // FIFO underrun count
 983   u32 racp_fo_count;               // FIFO overrun count
 984   u32 racp_chcs_count;             // correctable HCS error count
 985   u32 racp_uchcs_count;            // uncorrectable HCS error count
 986} IA_SUNI_STATS; 
 987
 988typedef struct iadev_priv {
 989        /*-----base pointers into (i)chipSAR+ address space */   
 990        u32 __iomem *phy;       /* Base pointer into phy (SUNI). */
 991        u32 __iomem *dma;       /* Base pointer into DMA control registers. */
 992        u32 __iomem *reg;       /* Base pointer to SAR registers. */
 993        u32 __iomem *seg_reg;           /* base pointer to segmentation engine  
 994                                                internal registers */  
 995        u32 __iomem *reass_reg;         /* base pointer to reassemble engine  
 996                                                internal registers */  
 997        u32 __iomem *ram;               /* base pointer to SAR RAM */  
 998        void __iomem *seg_ram;  
 999        void __iomem *reass_ram;  
1000        struct dle_q tx_dle_q;  
1001        struct free_desc_q *tx_free_desc_qhead;  
1002        struct sk_buff_head tx_dma_q, tx_backlog;  
1003        spinlock_t            tx_lock;
1004        IARTN_Q               tx_return_q;
1005        u32                   close_pending;
1006        wait_queue_head_t    close_wait;
1007        wait_queue_head_t    timeout_wait;
1008        struct cpcs_trailer_desc *tx_buf;
1009        u16 num_tx_desc, tx_buf_sz, rate_limit;
1010        u32 tx_cell_cnt, tx_pkt_cnt;
1011        void __iomem *MAIN_VC_TABLE_ADDR, *EXT_VC_TABLE_ADDR, *ABR_SCHED_TABLE_ADDR;
1012        struct dle_q rx_dle_q;  
1013        struct free_desc_q *rx_free_desc_qhead;  
1014        struct sk_buff_head rx_dma_q;  
1015        spinlock_t rx_lock;
1016        struct atm_vcc **rx_open;       /* list of all open VCs */  
1017        u16 num_rx_desc, rx_buf_sz, rxing;
1018        u32 rx_pkt_ram, rx_tmp_cnt;
1019        unsigned long rx_tmp_jif;
1020        void __iomem *RX_DESC_BASE_ADDR;
1021        u32 drop_rxpkt, drop_rxcell, rx_cell_cnt, rx_pkt_cnt;
1022        struct atm_dev *next_board;     /* other iphase devices */  
1023        struct pci_dev *pci;  
1024        int mem;  
1025        unsigned int real_base; /* real and virtual base address */  
1026        void __iomem *base;
1027        unsigned int pci_map_size;      /*pci map size of board */  
1028        unsigned char irq;  
1029        unsigned char bus;  
1030        unsigned char dev_fn;  
1031        u_short  phy_type;
1032        u_short  num_vc, memSize, memType;
1033        struct ia_ffL_t ffL;
1034        struct ia_rfL_t rfL;
1035        /* Suni stat */
1036        // IA_SUNI_STATS suni_stats;
1037        unsigned char carrier_detect;
1038        /* CBR related */
1039        // transmit DMA & Receive
1040        unsigned int tx_dma_cnt;     // number of elements on dma queue
1041        unsigned int rx_dma_cnt;     // number of elements on rx dma queue
1042        unsigned int NumEnabledCBR;  // number of CBR VCI's enabled.     CBR
1043        // receive MARK  for Cell FIFO
1044        unsigned int rx_mark_cnt;    // number of elements on mark queue
1045        unsigned int CbrTotEntries;  // Total CBR Entries in Scheduling Table.
1046        unsigned int CbrRemEntries;  // Remaining CBR Entries in Scheduling Table.
1047        unsigned int CbrEntryPt;     // CBR Sched Table Entry Point.
1048        unsigned int Granularity;    // CBR Granularity given Table Size.
1049        /* ABR related */
1050        unsigned int  sum_mcr, sum_cbr, LineRate;
1051        unsigned int  n_abr;
1052        struct desc_tbl_t *desc_tbl;
1053        u_short host_tcq_wr;
1054        struct testTable_t **testTable;
1055        dma_addr_t tx_dle_dma;
1056        dma_addr_t rx_dle_dma;
1057} IADEV;
1058  
1059  
1060#define INPH_IA_DEV(d) ((IADEV *) (d)->dev_data)  
1061#define INPH_IA_VCC(v) ((struct ia_vcc *) (v)->dev_data)  
1062
1063/******************* IDT77105 25MB/s PHY DEFINE *****************************/
1064enum ia_mb25 {
1065        MB25_MASTER_CTRL        = 0x00, /* Master control                    */
1066        MB25_INTR_STATUS        = 0x04, /* Interrupt status                  */
1067        MB25_DIAG_CONTROL       = 0x08, /* Diagnostic control                */
1068        MB25_LED_HEC            = 0x0c, /* LED driver and HEC status/control */
1069        MB25_LOW_BYTE_COUNTER   = 0x10,
1070        MB25_HIGH_BYTE_COUNTER  = 0x14
1071};
1072
1073/*
1074 * Master Control
1075 */
1076#define MB25_MC_UPLO    0x80            /* UPLO                              */
1077#define MB25_MC_DREC    0x40            /* Discard receive cell errors       */
1078#define MB25_MC_ECEIO   0x20            /* Enable Cell Error Interrupts Only */
1079#define MB25_MC_TDPC    0x10            /* Transmit data parity check        */
1080#define MB25_MC_DRIC    0x08            /* Discard receive idle cells        */
1081#define MB25_MC_HALTTX  0x04            /* Halt Tx                           */
1082#define MB25_MC_UMS     0x02            /* UTOPIA mode select                */
1083#define MB25_MC_ENABLED 0x01            /* Enable interrupt                  */
1084
1085/*
1086 * Interrupt Status
1087 */
1088#define MB25_IS_GSB     0x40            /* GOOD Symbol Bit                   */ 
1089#define MB25_IS_HECECR  0x20            /* HEC error cell received           */
1090#define MB25_IS_SCR     0x10            /* "Short Cell" Received             */
1091#define MB25_IS_TPE     0x08            /* Trnamsit Parity Error             */
1092#define MB25_IS_RSCC    0x04            /* Receive Signal Condition change   */
1093#define MB25_IS_RCSE    0x02            /* Received Cell Symbol Error        */
1094#define MB25_IS_RFIFOO  0x01            /* Received FIFO Overrun             */
1095
1096/*
1097 * Diagnostic Control
1098 */
1099#define MB25_DC_FTXCD   0x80            /* Force TxClav deassert             */ 
1100#define MB25_DC_RXCOS   0x40            /* RxClav operation select           */
1101#define MB25_DC_ECEIO   0x20            /* Single/Multi-PHY config select    */
1102#define MB25_DC_RLFLUSH 0x10            /* Clear receive FIFO                */
1103#define MB25_DC_IXPE    0x08            /* Insert xmit payload error         */
1104#define MB25_DC_IXHECE  0x04            /* Insert Xmit HEC Error             */
1105#define MB25_DC_LB_MASK 0x03            /* Loopback control mask             */
1106
1107#define MB25_DC_LL      0x03            /* Line Loopback                     */
1108#define MB25_DC_PL      0x02            /* PHY Loopback                      */
1109#define MB25_DC_NM      0x00            
1110
1111#define FE_MASK         0x00F0
1112#define FE_MULTI_MODE   0x0000
1113#define FE_SINGLE_MODE  0x0010 
1114#define FE_UTP_OPTION   0x0020
1115#define FE_25MBIT_PHY   0x0040
1116#define FE_DS3_PHY      0x0080          /* DS3 */
1117#define FE_E3_PHY       0x0090          /* E3 */
1118                     
1119/*********************** SUNI_PM7345 PHY DEFINE HERE *********************/
1120enum suni_pm7345 {
1121        SUNI_CONFIG                     = 0x000, /* SUNI Configuration */
1122        SUNI_INTR_ENBL                  = 0x004, /* SUNI Interrupt Enable */
1123        SUNI_INTR_STAT                  = 0x008, /* SUNI Interrupt Status */
1124        SUNI_CONTROL                    = 0x00c, /* SUNI Control */
1125        SUNI_ID_RESET                   = 0x010, /* SUNI Reset and Identity */
1126        SUNI_DATA_LINK_CTRL             = 0x014,
1127        SUNI_RBOC_CONF_INTR_ENBL        = 0x018,
1128        SUNI_RBOC_STAT                  = 0x01c,
1129        SUNI_DS3_FRM_CFG                = 0x020,
1130        SUNI_DS3_FRM_INTR_ENBL          = 0x024,
1131        SUNI_DS3_FRM_INTR_STAT          = 0x028,
1132        SUNI_DS3_FRM_STAT               = 0x02c,
1133        SUNI_RFDL_CFG                   = 0x030,
1134        SUNI_RFDL_ENBL_STAT             = 0x034,
1135        SUNI_RFDL_STAT                  = 0x038,
1136        SUNI_RFDL_DATA                  = 0x03c,
1137        SUNI_PMON_CHNG                  = 0x040,
1138        SUNI_PMON_INTR_ENBL_STAT        = 0x044,
1139        /* SUNI_RESERVED1 (0x13 - 0x11) */
1140        SUNI_PMON_LCV_EVT_CNT_LSB       = 0x050,
1141        SUNI_PMON_LCV_EVT_CNT_MSB       = 0x054,
1142        SUNI_PMON_FBE_EVT_CNT_LSB       = 0x058,
1143        SUNI_PMON_FBE_EVT_CNT_MSB       = 0x05c,
1144        SUNI_PMON_SEZ_DET_CNT_LSB       = 0x060,
1145        SUNI_PMON_SEZ_DET_CNT_MSB       = 0x064,
1146        SUNI_PMON_PE_EVT_CNT_LSB        = 0x068,
1147        SUNI_PMON_PE_EVT_CNT_MSB        = 0x06c,
1148        SUNI_PMON_PPE_EVT_CNT_LSB       = 0x070,
1149        SUNI_PMON_PPE_EVT_CNT_MSB       = 0x074,
1150        SUNI_PMON_FEBE_EVT_CNT_LSB      = 0x078,
1151        SUNI_PMON_FEBE_EVT_CNT_MSB      = 0x07c,
1152        SUNI_DS3_TRAN_CFG               = 0x080,
1153        SUNI_DS3_TRAN_DIAG              = 0x084,
1154        /* SUNI_RESERVED2 (0x23 - 0x21) */
1155        SUNI_XFDL_CFG                   = 0x090,
1156        SUNI_XFDL_INTR_ST               = 0x094,
1157        SUNI_XFDL_XMIT_DATA             = 0x098,
1158        SUNI_XBOC_CODE                  = 0x09c,
1159        SUNI_SPLR_CFG                   = 0x0a0,
1160        SUNI_SPLR_INTR_EN               = 0x0a4,
1161        SUNI_SPLR_INTR_ST               = 0x0a8,
1162        SUNI_SPLR_STATUS                = 0x0ac,
1163        SUNI_SPLT_CFG                   = 0x0b0,
1164        SUNI_SPLT_CNTL                  = 0x0b4,
1165        SUNI_SPLT_DIAG_G1               = 0x0b8,
1166        SUNI_SPLT_F1                    = 0x0bc,
1167        SUNI_CPPM_LOC_METERS            = 0x0c0,
1168        SUNI_CPPM_CHG_OF_CPPM_PERF_METR = 0x0c4,
1169        SUNI_CPPM_B1_ERR_CNT_LSB        = 0x0c8,
1170        SUNI_CPPM_B1_ERR_CNT_MSB        = 0x0cc,
1171        SUNI_CPPM_FRAMING_ERR_CNT_LSB   = 0x0d0,
1172        SUNI_CPPM_FRAMING_ERR_CNT_MSB   = 0x0d4,
1173        SUNI_CPPM_FEBE_CNT_LSB          = 0x0d8,
1174        SUNI_CPPM_FEBE_CNT_MSB          = 0x0dc,
1175        SUNI_CPPM_HCS_ERR_CNT_LSB       = 0x0e0,
1176        SUNI_CPPM_HCS_ERR_CNT_MSB       = 0x0e4,
1177        SUNI_CPPM_IDLE_UN_CELL_CNT_LSB  = 0x0e8,
1178        SUNI_CPPM_IDLE_UN_CELL_CNT_MSB  = 0x0ec,
1179        SUNI_CPPM_RCV_CELL_CNT_LSB      = 0x0f0,
1180        SUNI_CPPM_RCV_CELL_CNT_MSB      = 0x0f4,
1181        SUNI_CPPM_XMIT_CELL_CNT_LSB     = 0x0f8,
1182        SUNI_CPPM_XMIT_CELL_CNT_MSB     = 0x0fc,
1183        SUNI_RXCP_CTRL                  = 0x100,
1184        SUNI_RXCP_FCTRL                 = 0x104,
1185        SUNI_RXCP_INTR_EN_STS           = 0x108,
1186        SUNI_RXCP_IDLE_PAT_H1           = 0x10c,
1187        SUNI_RXCP_IDLE_PAT_H2           = 0x110,
1188        SUNI_RXCP_IDLE_PAT_H3           = 0x114,
1189        SUNI_RXCP_IDLE_PAT_H4           = 0x118,
1190        SUNI_RXCP_IDLE_MASK_H1          = 0x11c,
1191        SUNI_RXCP_IDLE_MASK_H2          = 0x120,
1192        SUNI_RXCP_IDLE_MASK_H3          = 0x124,
1193        SUNI_RXCP_IDLE_MASK_H4          = 0x128,
1194        SUNI_RXCP_CELL_PAT_H1           = 0x12c,
1195        SUNI_RXCP_CELL_PAT_H2           = 0x130,
1196        SUNI_RXCP_CELL_PAT_H3           = 0x134,
1197        SUNI_RXCP_CELL_PAT_H4           = 0x138,
1198        SUNI_RXCP_CELL_MASK_H1          = 0x13c,
1199        SUNI_RXCP_CELL_MASK_H2          = 0x140,
1200        SUNI_RXCP_CELL_MASK_H3          = 0x144,
1201        SUNI_RXCP_CELL_MASK_H4          = 0x148,
1202        SUNI_RXCP_HCS_CS                = 0x14c,
1203        SUNI_RXCP_LCD_CNT_THRESHOLD     = 0x150,
1204        /* SUNI_RESERVED3 (0x57 - 0x54) */
1205        SUNI_TXCP_CTRL                  = 0x160,
1206        SUNI_TXCP_INTR_EN_STS           = 0x164,
1207        SUNI_TXCP_IDLE_PAT_H1           = 0x168,
1208        SUNI_TXCP_IDLE_PAT_H2           = 0x16c,
1209        SUNI_TXCP_IDLE_PAT_H3           = 0x170,
1210        SUNI_TXCP_IDLE_PAT_H4           = 0x174,
1211        SUNI_TXCP_IDLE_PAT_H5           = 0x178,
1212        SUNI_TXCP_IDLE_PAYLOAD          = 0x17c,
1213        SUNI_E3_FRM_FRAM_OPTIONS        = 0x180,
1214        SUNI_E3_FRM_MAINT_OPTIONS       = 0x184,
1215        SUNI_E3_FRM_FRAM_INTR_ENBL      = 0x188,
1216        SUNI_E3_FRM_FRAM_INTR_IND_STAT  = 0x18c,
1217        SUNI_E3_FRM_MAINT_INTR_ENBL     = 0x190,
1218        SUNI_E3_FRM_MAINT_INTR_IND      = 0x194,
1219        SUNI_E3_FRM_MAINT_STAT          = 0x198,
1220        SUNI_RESERVED4                  = 0x19c,
1221        SUNI_E3_TRAN_FRAM_OPTIONS       = 0x1a0,
1222        SUNI_E3_TRAN_STAT_DIAG_OPTIONS  = 0x1a4,
1223        SUNI_E3_TRAN_BIP_8_ERR_MASK     = 0x1a8,
1224        SUNI_E3_TRAN_MAINT_ADAPT_OPTS   = 0x1ac,
1225        SUNI_TTB_CTRL                   = 0x1b0,
1226        SUNI_TTB_TRAIL_TRACE_ID_STAT    = 0x1b4,
1227        SUNI_TTB_IND_ADDR               = 0x1b8,
1228        SUNI_TTB_IND_DATA               = 0x1bc,
1229        SUNI_TTB_EXP_PAYLOAD_TYPE       = 0x1c0,
1230        SUNI_TTB_PAYLOAD_TYPE_CTRL_STAT = 0x1c4,
1231        /* SUNI_PAD5 (0x7f - 0x71) */
1232        SUNI_MASTER_TEST                = 0x200,
1233        /* SUNI_PAD6 (0xff - 0x80) */
1234};
1235
1236#define SUNI_PM7345_T suni_pm7345_t
1237#define SUNI_PM7345     0x20            /* Suni chip type */
1238#define SUNI_PM5346     0x30            /* Suni chip type */
1239/*
1240 * SUNI_PM7345 Configuration
1241 */
1242#define SUNI_PM7345_CLB         0x01    /* Cell loopback        */
1243#define SUNI_PM7345_PLB         0x02    /* Payload loopback     */
1244#define SUNI_PM7345_DLB         0x04    /* Diagnostic loopback  */
1245#define SUNI_PM7345_LLB         0x80    /* Line loopback        */
1246#define SUNI_PM7345_E3ENBL      0x40    /* E3 enable bit        */
1247#define SUNI_PM7345_LOOPT       0x10    /* LOOPT enable bit     */
1248#define SUNI_PM7345_FIFOBP      0x20    /* FIFO bypass          */
1249#define SUNI_PM7345_FRMRBP      0x08    /* Framer bypass        */
1250/*
1251 * DS3 FRMR Interrupt Enable
1252 */
1253#define SUNI_DS3_COFAE  0x80            /* Enable change of frame align */
1254#define SUNI_DS3_REDE   0x40            /* Enable DS3 RED state intr    */
1255#define SUNI_DS3_CBITE  0x20            /* Enable Appl ID channel intr  */
1256#define SUNI_DS3_FERFE  0x10            /* Enable Far End Receive Failure intr*/
1257#define SUNI_DS3_IDLE   0x08            /* Enable Idle signal intr      */
1258#define SUNI_DS3_AISE   0x04            /* Enable Alarm Indication signal intr*/
1259#define SUNI_DS3_OOFE   0x02            /* Enable Out of frame intr     */
1260#define SUNI_DS3_LOSE   0x01            /* Enable Loss of signal intr   */
1261 
1262/*
1263 * DS3 FRMR Status
1264 */
1265#define SUNI_DS3_ACE    0x80            /* Additional Configuration Reg */
1266#define SUNI_DS3_REDV   0x40            /* DS3 RED state                */
1267#define SUNI_DS3_CBITV  0x20            /* Application ID channel state */
1268#define SUNI_DS3_FERFV  0x10            /* Far End Receive Failure state*/
1269#define SUNI_DS3_IDLV   0x08            /* Idle signal state            */
1270#define SUNI_DS3_AISV   0x04            /* Alarm Indication signal state*/
1271#define SUNI_DS3_OOFV   0x02            /* Out of frame state           */
1272#define SUNI_DS3_LOSV   0x01            /* Loss of signal state         */
1273
1274/*
1275 * E3 FRMR Interrupt/Status
1276 */
1277#define SUNI_E3_CZDI    0x40            /* Consecutive Zeros indicator  */
1278#define SUNI_E3_LOSI    0x20            /* Loss of signal intr status   */
1279#define SUNI_E3_LCVI    0x10            /* Line code violation intr     */
1280#define SUNI_E3_COFAI   0x08            /* Change of frame align intr   */
1281#define SUNI_E3_OOFI    0x04            /* Out of frame intr status     */
1282#define SUNI_E3_LOS     0x02            /* Loss of signal state         */
1283#define SUNI_E3_OOF     0x01            /* Out of frame state           */
1284
1285/*
1286 * E3 FRMR Maintenance Status
1287 */
1288#define SUNI_E3_AISD    0x80            /* Alarm Indication signal state*/
1289#define SUNI_E3_FERF_RAI        0x40    /* FERF/RAI indicator           */
1290#define SUNI_E3_FEBE    0x20            /* Far End Block Error indicator*/
1291
1292/*
1293 * RXCP Control/Status
1294 */
1295#define SUNI_DS3_HCSPASS        0x80    /* Pass cell with HEC errors    */
1296#define SUNI_DS3_HCSDQDB        0x40    /* Control octets in HCS calc   */
1297#define SUNI_DS3_HCSADD         0x20    /* Add coset poly               */
1298#define SUNI_DS3_HCK            0x10    /* Control FIFO data path integ chk*/
1299#define SUNI_DS3_BLOCK          0x08    /* Enable cell filtering        */
1300#define SUNI_DS3_DSCR           0x04    /* Disable payload descrambling */
1301#define SUNI_DS3_OOCDV          0x02    /* Cell delineation state       */
1302#define SUNI_DS3_FIFORST        0x01    /* Cell FIFO reset              */
1303
1304/*
1305 * RXCP Interrupt Enable/Status
1306 */
1307#define SUNI_DS3_OOCDE  0x80            /* Intr enable, change in CDS   */
1308#define SUNI_DS3_HCSE   0x40            /* Intr enable, corr HCS errors */
1309#define SUNI_DS3_FIFOE  0x20            /* Intr enable, unco HCS errors */
1310#define SUNI_DS3_OOCDI  0x10            /* SYNC state                   */
1311#define SUNI_DS3_UHCSI  0x08            /* Uncorr. HCS errors detected  */
1312#define SUNI_DS3_COCAI  0x04            /* Corr. HCS errors detected    */
1313#define SUNI_DS3_FOVRI  0x02            /* FIFO overrun                 */
1314#define SUNI_DS3_FUDRI  0x01            /* FIFO underrun                */
1315
1316///////////////////SUNI_PM7345 PHY DEFINE END /////////////////////////////
1317
1318/* ia_eeprom define*/
1319#define MEM_SIZE_MASK   0x000F          /* mask of 4 bits defining memory size*/
1320#define MEM_SIZE_128K   0x0000          /* board has 128k buffer */
1321#define MEM_SIZE_512K   0x0001          /* board has 512K of buffer */
1322#define MEM_SIZE_1M     0x0002          /* board has 1M of buffer */
1323                                        /* 0x3 to 0xF are reserved for future */
1324
1325#define FE_MASK         0x00F0          /* mask of 4 bits defining FE type */
1326#define FE_MULTI_MODE   0x0000          /* 155 MBit multimode fiber */
1327#define FE_SINGLE_MODE  0x0010          /* 155 MBit single mode laser */
1328#define FE_UTP_OPTION   0x0020          /* 155 MBit UTP front end */
1329
1330#define NOVRAM_SIZE     64
1331#define CMD_LEN         10
1332
1333/***********
1334 *
1335 *      Switches and defines for header files.
1336 *
1337 *      The following defines are used to turn on and off
1338 *      various options in the header files. Primarily useful
1339 *      for debugging.
1340 *
1341 ***********/
1342
1343/*
1344 * a list of the commands that can be sent to the NOVRAM
1345 */
1346
1347#define EXTEND  0x100
1348#define IAWRITE 0x140
1349#define IAREAD  0x180
1350#define ERASE   0x1c0
1351
1352#define EWDS    0x00
1353#define WRAL    0x10
1354#define ERAL    0x20
1355#define EWEN    0x30
1356
1357/*
1358 * these bits duplicate the hw_flip.h register settings
1359 * note: how the data in / out bits are defined in the flipper specification 
1360 */
1361
1362#define NVCE    0x02
1363#define NVSK    0x01
1364#define NVDO    0x08    
1365#define NVDI    0x04
1366/***********************
1367 *
1368 * This define ands the value and the current config register and puts
1369 * the result in the config register
1370 *
1371 ***********************/
1372
1373#define CFG_AND(val) { \
1374                u32 t; \
1375                t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \
1376                t &= (val); \
1377                writel(t, iadev->reg+IPHASE5575_EEPROM_ACCESS); \
1378        }
1379
1380/***********************
1381 *
1382 * This define ors the value and the current config register and puts
1383 * the result in the config register
1384 *
1385 ***********************/
1386
1387#define CFG_OR(val) { \
1388                u32 t; \
1389                t =  readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \
1390                t |= (val); \
1391                writel(t, iadev->reg+IPHASE5575_EEPROM_ACCESS); \
1392        }
1393
1394/***********************
1395 *
1396 * Send a command to the NOVRAM, the command is in cmd.
1397 *
1398 * clear CE and SK. Then assert CE.
1399 * Clock each of the command bits out in the correct order with SK
1400 * exit with CE still asserted
1401 *
1402 ***********************/
1403
1404#define NVRAM_CMD(cmd) { \
1405                int     i; \
1406                u_short c = cmd; \
1407                CFG_AND(~(NVCE|NVSK)); \
1408                CFG_OR(NVCE); \
1409                for (i=0; i<CMD_LEN; i++) { \
1410                        NVRAM_CLKOUT((c & (1 << (CMD_LEN - 1))) ? 1 : 0); \
1411                        c <<= 1; \
1412                } \
1413        }
1414
1415/***********************
1416 *
1417 * clear the CE, this must be used after each command is complete
1418 *
1419 ***********************/
1420
1421#define NVRAM_CLR_CE    {CFG_AND(~NVCE)}
1422
1423/***********************
1424 *
1425 * clock the data bit in bitval out to the NOVRAM.  The bitval must be
1426 * a 1 or 0, or the clockout operation is undefined
1427 *
1428 ***********************/
1429
1430#define NVRAM_CLKOUT(bitval) { \
1431                CFG_AND(~NVDI); \
1432                CFG_OR((bitval) ? NVDI : 0); \
1433                CFG_OR(NVSK); \
1434                CFG_AND( ~NVSK); \
1435        }
1436
1437/***********************
1438 *
1439 * clock the data bit in and return a 1 or 0, depending on the value
1440 * that was received from the NOVRAM
1441 *
1442 ***********************/
1443
1444#define NVRAM_CLKIN(value) { \
1445                u32 _t; \
1446                CFG_OR(NVSK); \
1447                CFG_AND(~NVSK); \
1448                _t = readl(iadev->reg+IPHASE5575_EEPROM_ACCESS); \
1449                value = (_t & NVDO) ? 1 : 0; \
1450        }
1451
1452
1453#endif /* IPHASE_H */
1454
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.