linux/arch/m68k/Kconfig.devices
<<
>>
Prefs
   1if MMU
   2
   3config ARCH_MAY_HAVE_PC_FDC
   4        bool
   5        depends on BROKEN && (Q40 || SUN3X)
   6        default y
   7
   8menu "Platform devices"
   9
  10config HEARTBEAT
  11        bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
  12        default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
  13        help
  14          Use the power-on LED on your machine as a load meter.  The exact
  15          behavior is platform-dependent, but normally the flash frequency is
  16          a hyperbolic function of the 5-minute load average.
  17
  18# We have a dedicated heartbeat LED. :-)
  19config PROC_HARDWARE
  20        bool "/proc/hardware support"
  21        help
  22          Say Y here to support the /proc/hardware file, which gives you
  23          access to information about the machine you're running on,
  24          including the model, CPU, MMU, clock speed, BogoMIPS rating,
  25          and memory size.
  26
  27config NATFEAT
  28        bool "ARAnyM emulator support"
  29        depends on ATARI
  30        help
  31          This option enables support for ARAnyM native features, such as
  32          access to a disk image as /dev/hda.
  33
  34config NFBLOCK
  35        tristate "NatFeat block device support"
  36        depends on BLOCK && NATFEAT
  37        help
  38          Say Y to include support for the ARAnyM NatFeat block device
  39          which allows direct access to the hard drives without using
  40          the hardware emulation.
  41
  42config NFCON
  43        tristate "NatFeat console driver"
  44        depends on NATFEAT
  45        help
  46          Say Y to include support for the ARAnyM NatFeat console driver
  47          which allows the console output to be redirected to the stderr
  48          output of ARAnyM.
  49
  50config NFETH
  51        tristate "NatFeat Ethernet support"
  52        depends on ETHERNET && NATFEAT
  53        help
  54          Say Y to include support for the ARAnyM NatFeat network device
  55          which will emulate a regular ethernet device while presenting an
  56          ethertap device to the host system.
  57
  58endmenu
  59
  60menu "Character devices"
  61
  62config ATARI_DSP56K
  63        tristate "Atari DSP56k support (EXPERIMENTAL)"
  64        depends on ATARI && EXPERIMENTAL
  65        help
  66          If you want to be able to use the DSP56001 in Falcons, say Y. This
  67          driver is still experimental, and if you don't know what it is, or
  68          if you don't have this processor, just say N.
  69
  70          To compile this driver as a module, choose M here.
  71
  72config AMIGA_BUILTIN_SERIAL
  73        tristate "Amiga builtin serial support"
  74        depends on AMIGA
  75        help
  76          If you want to use your Amiga's built-in serial port in Linux,
  77          answer Y.
  78
  79          To compile this driver as a module, choose M here.
  80
  81config HPDCA
  82        tristate "HP DCA serial support"
  83        depends on DIO && SERIAL_8250
  84        help
  85          If you want to use the internal "DCA" serial ports on an HP300
  86          machine, say Y here.
  87
  88config HPAPCI
  89        tristate "HP APCI serial support"
  90        depends on HP300 && SERIAL_8250 && EXPERIMENTAL
  91        help
  92          If you want to use the internal "APCI" serial ports on an HP400
  93          machine, say Y here.
  94
  95config SERIAL_CONSOLE
  96        bool "Support for serial port console"
  97        depends on AMIGA_BUILTIN_SERIAL=y
  98        ---help---
  99          If you say Y here, it will be possible to use a serial port as the
 100          system console (the system console is the device which receives all
 101          kernel messages and warnings and which allows logins in single user
 102          mode). This could be useful if some terminal or printer is connected
 103          to that serial port.
 104
 105          Even if you say Y here, the currently visible virtual console
 106          (/dev/tty0) will still be used as the system console by default, but
 107          you can alter that using a kernel command line option such as
 108          "console=ttyS1". (Try "man bootparam" or see the documentation of
 109          your boot loader about how to pass options to the kernel at boot
 110          time.)
 111
 112          If you don't have a graphical console and you say Y here, the
 113          kernel will automatically use the first serial line, /dev/ttyS0, as
 114          system console.
 115
 116          If unsure, say N.
 117
 118endmenu
 119
 120endif
 121
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.