linux/scripts/link-vmlinux.sh
<<
>>
Prefs
   1#!/bin/sh
   2#
   3# link vmlinux
   4#
   5# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_INIT) and
   6# $(KBUILD_VMLINUX_MAIN). Most are built-in.o files from top-level directories
   7# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
   8# Ordering when linking is important, and $(KBUILD_VMLINUX_INIT) must be first.
   9#
  10# vmlinux
  11#   ^
  12#   |
  13#   +-< $(KBUILD_VMLINUX_INIT)
  14#   |   +--< init/version.o + more
  15#   |
  16#   +--< $(KBUILD_VMLINUX_MAIN)
  17#   |    +--< drivers/built-in.o mm/built-in.o + more
  18#   |
  19#   +-< ${kallsymso} (see description in KALLSYMS section)
  20#
  21# vmlinux version (uname -v) cannot be updated during normal
  22# descending-into-subdirs phase since we do not yet know if we need to
  23# update vmlinux.
  24# Therefore this step is delayed until just before final link of vmlinux.
  25#
  26# System.map is generated to document addresses of all kernel symbols
  27
  28# Error out on error
  29set -e
  30
  31# Nice output in kbuild format
  32# Will be supressed by "make -s"
  33info()
  34{
  35        if [ "${quiet}" != "silent_" ]; then
  36                printf "  %-7s %s\n" ${1} ${2}
  37        fi
  38}
  39
  40# Link of vmlinux.o used for section mismatch analysis
  41# ${1} output file
  42modpost_link()
  43{
  44        ${LD} ${LDFLAGS} -r -o ${1} ${KBUILD_VMLINUX_INIT}                   \
  45                --start-group ${KBUILD_VMLINUX_MAIN} --end-group
  46}
  47
  48# Link of vmlinux
  49# ${1} - optional extra .o files
  50# ${2} - output file
  51vmlinux_link()
  52{
  53        local lds="${objtree}/${KBUILD_LDS}"
  54
  55        if [ "${SRCARCH}" != "um" ]; then
  56                ${LD} ${LDFLAGS} ${LDFLAGS_vmlinux} -o ${2}                  \
  57                        -T ${lds} ${KBUILD_VMLINUX_INIT}                     \
  58                        --start-group ${KBUILD_VMLINUX_MAIN} --end-group ${1}
  59        else
  60                ${CC} ${CFLAGS_vmlinux} -o ${2}                              \
  61                        -Wl,-T,${lds} ${KBUILD_VMLINUX_INIT}                 \
  62                        -Wl,--start-group                                    \
  63                                 ${KBUILD_VMLINUX_MAIN}                      \
  64                        -Wl,--end-group                                      \
  65                        -lutil ${1}
  66                rm -f linux
  67        fi
  68}
  69
  70
  71# Create ${2} .o file with all symbols from the ${1} object file
  72kallsyms()
  73{
  74        info KSYM ${2}
  75        local kallsymopt;
  76
  77        if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
  78                kallsymopt=--all-symbols
  79        fi
  80
  81        local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
  82                      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
  83
  84        ${NM} -n ${1} | \
  85                scripts/kallsyms ${kallsymopt} | \
  86                ${CC} ${aflags} -c -o ${2} -x assembler-with-cpp -
  87}
  88
  89# Create map file with all symbols from ${1}
  90# See mksymap for additional details
  91mksysmap()
  92{
  93        ${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2}
  94}
  95
  96sortextable()
  97{
  98        ${objtree}/scripts/sortextable ${1}
  99}
 100
 101# Delete output files in case of error
 102trap cleanup SIGHUP SIGINT SIGQUIT SIGTERM ERR
 103cleanup()
 104{
 105        rm -f .old_version
 106        rm -f .tmp_System.map
 107        rm -f .tmp_kallsyms*
 108        rm -f .tmp_version
 109        rm -f .tmp_vmlinux*
 110        rm -f System.map
 111        rm -f vmlinux
 112        rm -f vmlinux.o
 113}
 114
 115#
 116#
 117# Use "make V=1" to debug this script
 118case "${KBUILD_VERBOSE}" in
 119*1*)
 120        set -x
 121        ;;
 122esac
 123
 124if [ "$1" = "clean" ]; then
 125        cleanup
 126        exit 0
 127fi
 128
 129# We need access to CONFIG_ symbols
 130. ./.config
 131
 132#link vmlinux.o
 133info LD vmlinux.o
 134modpost_link vmlinux.o
 135
 136# modpost vmlinux.o to check for section mismatches
 137${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o
 138
 139# Update version
 140info GEN .version
 141if [ ! -r .version ]; then
 142        rm -f .version;
 143        echo 1 >.version;
 144else
 145        mv .version .old_version;
 146        expr 0$(cat .old_version) + 1 >.version;
 147fi;
 148
 149# final build of init/
 150${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init
 151
 152kallsymso=""
 153kallsyms_vmlinux=""
 154if [ -n "${CONFIG_KALLSYMS}" ]; then
 155
 156        # kallsyms support
 157        # Generate section listing all symbols and add it into vmlinux
 158        # It's a three step process:
 159        # 1)  Link .tmp_vmlinux1 so it has all symbols and sections,
 160        #     but __kallsyms is empty.
 161        #     Running kallsyms on that gives us .tmp_kallsyms1.o with
 162        #     the right size
 163        # 2)  Link .tmp_vmlinux2 so it now has a __kallsyms section of
 164        #     the right size, but due to the added section, some
 165        #     addresses have shifted.
 166        #     From here, we generate a correct .tmp_kallsyms2.o
 167        # 2a) We may use an extra pass as this has been necessary to
 168        #     woraround some alignment related bugs.
 169        #     KALLSYMS_EXTRA_PASS=1 is used to trigger this.
 170        # 3)  The correct ${kallsymso} is linked into the final vmlinux.
 171        #
 172        # a)  Verify that the System.map from vmlinux matches the map from
 173        #     ${kallsymso}.
 174
 175        kallsymso=.tmp_kallsyms2.o
 176        kallsyms_vmlinux=.tmp_vmlinux2
 177
 178        # step 1
 179        vmlinux_link "" .tmp_vmlinux1
 180        kallsyms .tmp_vmlinux1 .tmp_kallsyms1.o
 181
 182        # step 2
 183        vmlinux_link .tmp_kallsyms1.o .tmp_vmlinux2
 184        kallsyms .tmp_vmlinux2 .tmp_kallsyms2.o
 185
 186        # step 2a
 187        if [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
 188                kallsymso=.tmp_kallsyms3.o
 189                kallsyms_vmlinux=.tmp_vmlinux3
 190
 191                vmlinux_link .tmp_kallsyms2.o .tmp_vmlinux3
 192
 193                kallsyms .tmp_vmlinux3 .tmp_kallsyms3.o
 194        fi
 195fi
 196
 197info LD vmlinux
 198vmlinux_link "${kallsymso}" vmlinux
 199
 200if [ -n "${CONFIG_BUILDTIME_EXTABLE_SORT}" ]; then
 201        info SORTEX vmlinux
 202        sortextable vmlinux
 203fi
 204
 205info SYSMAP System.map
 206mksysmap vmlinux System.map
 207
 208# step a (see comment above)
 209if [ -n "${CONFIG_KALLSYMS}" ]; then
 210        mksysmap ${kallsyms_vmlinux} .tmp_System.map
 211
 212        if ! cmp -s System.map .tmp_System.map; then
 213                echo Inconsistent kallsyms data
 214                echo echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
 215                cleanup
 216                exit 1
 217        fi
 218fi
 219
 220# We made a new kernel - delete old version file
 221rm -f .old_version
 222
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.