linux/drivers/media/video/bt8xx/bttv-cards.c
<<
>>
Prefs
   1/*
   2
   3    bttv-cards.c
   4
   5    this file has configuration informations - card-specific stuff
   6    like the big tvcards array for the most part
   7
   8    Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
   9                           & Marcus Metzler (mocm@thp.uni-koeln.de)
  10    (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  11
  12    This program is free software; you can redistribute it and/or modify
  13    it under the terms of the GNU General Public License as published by
  14    the Free Software Foundation; either version 2 of the License, or
  15    (at your option) any later version.
  16
  17    This program is distributed in the hope that it will be useful,
  18    but WITHOUT ANY WARRANTY; without even the implied warranty of
  19    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20    GNU General Public License for more details.
  21
  22    You should have received a copy of the GNU General Public License
  23    along with this program; if not, write to the Free Software
  24    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25
  26*/
  27
  28#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  29
  30#include <linux/delay.h>
  31#include <linux/module.h>
  32#include <linux/kmod.h>
  33#include <linux/init.h>
  34#include <linux/pci.h>
  35#include <linux/vmalloc.h>
  36#include <linux/firmware.h>
  37#include <net/checksum.h>
  38
  39#include <asm/unaligned.h>
  40#include <asm/io.h>
  41
  42#include "bttvp.h"
  43#include <media/v4l2-common.h>
  44#include <media/tvaudio.h>
  45#include "bttv-audio-hook.h"
  46
  47/* fwd decl */
  48static void boot_msp34xx(struct bttv *btv, int pin);
  49static void hauppauge_eeprom(struct bttv *btv);
  50static void avermedia_eeprom(struct bttv *btv);
  51static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  52static void modtec_eeprom(struct bttv *btv);
  53static void init_PXC200(struct bttv *btv);
  54static void init_RTV24(struct bttv *btv);
  55
  56static void rv605_muxsel(struct bttv *btv, unsigned int input);
  57static void eagle_muxsel(struct bttv *btv, unsigned int input);
  58static void xguard_muxsel(struct bttv *btv, unsigned int input);
  59static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  60static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  61
  62static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  63
  64static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  65static void picolo_tetra_init(struct bttv *btv);
  66
  67static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  68static void tibetCS16_init(struct bttv *btv);
  69
  70static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  71static void kodicom4400r_init(struct bttv *btv);
  72
  73static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  74static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  75
  76static void geovision_muxsel(struct bttv *btv, unsigned int input);
  77
  78static void phytec_muxsel(struct bttv *btv, unsigned int input);
  79
  80static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  81static void gv800s_init(struct bttv *btv);
  82
  83static void td3116_muxsel(struct bttv *btv, unsigned int input);
  84
  85static int terratec_active_radio_upgrade(struct bttv *btv);
  86static int tea5757_read(struct bttv *btv);
  87static int tea5757_write(struct bttv *btv, int value);
  88static void identify_by_eeprom(struct bttv *btv,
  89                               unsigned char eeprom_data[256]);
  90static int __devinit pvr_boot(struct bttv *btv);
  91
  92/* config variables */
  93static unsigned int triton1;
  94static unsigned int vsfx;
  95static unsigned int latency = UNSET;
  96int no_overlay=-1;
  97
  98static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  99static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 100static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 101static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 102static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
 103static unsigned int audiodev[BTTV_MAX];
 104static unsigned int saa6588[BTTV_MAX];
 105static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
 106static unsigned int autoload = UNSET;
 107static unsigned int gpiomask = UNSET;
 108static unsigned int audioall = UNSET;
 109static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
 110
 111/* insmod options */
 112module_param(triton1,    int, 0444);
 113module_param(vsfx,       int, 0444);
 114module_param(no_overlay, int, 0444);
 115module_param(latency,    int, 0444);
 116module_param(gpiomask,   int, 0444);
 117module_param(audioall,   int, 0444);
 118module_param(autoload,   int, 0444);
 119
 120module_param_array(card,     int, NULL, 0444);
 121module_param_array(pll,      int, NULL, 0444);
 122module_param_array(tuner,    int, NULL, 0444);
 123module_param_array(svhs,     int, NULL, 0444);
 124module_param_array(remote,   int, NULL, 0444);
 125module_param_array(audiodev, int, NULL, 0444);
 126module_param_array(audiomux, int, NULL, 0444);
 127
 128MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
 129                 "[enable bug compatibility for triton1 + others]");
 130MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
 131                 "[yet another chipset flaw workaround]");
 132MODULE_PARM_DESC(latency,"pci latency timer");
 133MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 134MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
 135MODULE_PARM_DESC(tuner,"specify installed tuner type");
 136MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 137MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 138                "\t\t-1 = no audio\n"
 139                "\t\t 0 = autodetect (default)\n"
 140                "\t\t 1 = msp3400\n"
 141                "\t\t 2 = tda7432\n"
 142                "\t\t 3 = tvaudio");
 143MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 144MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
 145                " [some VIA/SIS chipsets are known to have problem with overlay]");
 146
 147/* ----------------------------------------------------------------------- */
 148/* list of card IDs for bt878+ cards                                       */
 149
 150static struct CARD {
 151        unsigned id;
 152        int cardnr;
 153        char *name;
 154} cards[] __devinitdata = {
 155        { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 156        { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 157        { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 158        { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 159        { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 160        { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 161        { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 162        { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 163        { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 164
 165        { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 166        { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 167
 168        { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 169        { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 170        { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 171        { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 172        { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 173        { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 174        { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 175        { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 176        { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 177
 178        { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 179        /* some cards ship with byteswapped IDs ... */
 180        { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 181        { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 182        /* this seems to happen as well ... */
 183        { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 184
 185        { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 186        { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 187        { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 188
 189        { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 190        { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 191        { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 192        { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 193        { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 194        { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 195        { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 196
 197        { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 198        { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 199        { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 200        { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 201        { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 202
 203        { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 204        { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 205        { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 206        { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 207
 208        { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 209        { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 210        /* clashes with FlyVideo
 211         *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 212        { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 213        { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 214        { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 215        { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 216
 217        { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 218        { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 219        { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 220        { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 221        { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 222
 223        { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 224        { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 225        { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 226        { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 227        { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 228
 229        { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 230        { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 231        { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 232        { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 233
 234        { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 235        { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 236        { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 237        { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 238
 239        { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 240        { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 241        { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 242        { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 243        { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 244        { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 245        { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 246        { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 247        { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 248        { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 249        { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 250        { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 251        { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 252        { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 253        { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 254        { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 255        { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 256        { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 257        { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 258        { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 259        { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 260        { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 261        { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 262        { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 263        { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 264        { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 265        { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 266        { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 267        { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 268        { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 269        { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 270        { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 271        { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 272
 273        { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 274        { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 275
 276        { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 277        { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 278        { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 279        { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 280        { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 281        { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 282
 283        { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 284        { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 285
 286        { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 287        { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 288        { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 289        { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 290        { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 291        { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 292        { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 293        { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 294        { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 295        { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 296
 297        { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 298        { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 299
 300        { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 301        { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 302        { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 303        { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 304
 305        { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 306
 307        { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 308        { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 309
 310        /* likely broken, vendor id doesn't match the other magic views ...
 311         * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 312
 313        /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 314        * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 315
 316        { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 317
 318        /* DVB cards (using pci function .1 for mpeg data xfer) */
 319        { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 320        { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 321        { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 322        { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 323        { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 324        { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 325        { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 326        { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 327        { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 328        { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 329        { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 330        { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 331        { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 332        { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 333        { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 334        { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 335        { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 336        { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 337        { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 338
 339        { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 340        { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 341        { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 342        { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 343        { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 344        { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 345        { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 346        { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 347        { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 348
 349        { 0, -1, NULL }
 350};
 351
 352/* ----------------------------------------------------------------------- */
 353/* array with description for bt848 / bt878 tv/grabber cards               */
 354
 355struct tvcard bttv_tvcards[] = {
 356        /* ---- card 0x00 ---------------------------------- */
 357        [BTTV_BOARD_UNKNOWN] = {
 358                .name           = " *** UNKNOWN/GENERIC *** ",
 359                .video_inputs   = 4,
 360                .svhs           = 2,
 361                .muxsel         = MUXSEL(2, 3, 1, 0),
 362                .tuner_type     = UNSET,
 363                .tuner_addr     = ADDR_UNSET,
 364        },
 365        [BTTV_BOARD_MIRO] = {
 366                .name           = "MIRO PCTV",
 367                .video_inputs   = 4,
 368                /* .audio_inputs= 1, */
 369                .svhs           = 2,
 370                .gpiomask       = 15,
 371                .muxsel         = MUXSEL(2, 3, 1, 1),
 372                .gpiomux        = { 2, 0, 0, 0 },
 373                .gpiomute       = 10,
 374                .needs_tvaudio  = 1,
 375                .tuner_type     = UNSET,
 376                .tuner_addr     = ADDR_UNSET,
 377        },
 378        [BTTV_BOARD_HAUPPAUGE] = {
 379                .name           = "Hauppauge (bt848)",
 380                .video_inputs   = 4,
 381                /* .audio_inputs= 1, */
 382                .svhs           = 2,
 383                .gpiomask       = 7,
 384                .muxsel         = MUXSEL(2, 3, 1, 1),
 385                .gpiomux        = { 0, 1, 2, 3 },
 386                .gpiomute       = 4,
 387                .needs_tvaudio  = 1,
 388                .tuner_type     = UNSET,
 389                .tuner_addr     = ADDR_UNSET,
 390        },
 391        [BTTV_BOARD_STB] = {
 392                .name           = "STB, Gateway P/N 6000699 (bt848)",
 393                .video_inputs   = 3,
 394                /* .audio_inputs= 1, */
 395                .svhs           = 2,
 396                .gpiomask       = 7,
 397                .muxsel         = MUXSEL(2, 3, 1, 1),
 398                .gpiomux        = { 4, 0, 2, 3 },
 399                .gpiomute       = 1,
 400                .no_msp34xx     = 1,
 401                .needs_tvaudio  = 1,
 402                .tuner_type     = TUNER_PHILIPS_NTSC,
 403                .tuner_addr     = ADDR_UNSET,
 404                .pll            = PLL_28,
 405                .has_radio      = 1,
 406        },
 407
 408        /* ---- card 0x04 ---------------------------------- */
 409        [BTTV_BOARD_INTEL] = {
 410                .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 411                .video_inputs   = 4,
 412                /* .audio_inputs= 0, */
 413                .svhs           = 2,
 414                .gpiomask       = 0,
 415                .muxsel         = MUXSEL(2, 3, 1, 1),
 416                .gpiomux        = { 0 },
 417                .needs_tvaudio  = 0,
 418                .tuner_type     = TUNER_ABSENT,
 419                .tuner_addr     = ADDR_UNSET,
 420        },
 421        [BTTV_BOARD_DIAMOND] = {
 422                .name           = "Diamond DTV2000",
 423                .video_inputs   = 4,
 424                /* .audio_inputs= 1, */
 425                .svhs           = 2,
 426                .gpiomask       = 3,
 427                .muxsel         = MUXSEL(2, 3, 1, 0),
 428                .gpiomux        = { 0, 1, 0, 1 },
 429                .gpiomute       = 3,
 430                .needs_tvaudio  = 1,
 431                .tuner_type     = UNSET,
 432                .tuner_addr     = ADDR_UNSET,
 433        },
 434        [BTTV_BOARD_AVERMEDIA] = {
 435                .name           = "AVerMedia TVPhone",
 436                .video_inputs   = 3,
 437                /* .audio_inputs= 1, */
 438                .svhs           = 3,
 439                .muxsel         = MUXSEL(2, 3, 1, 1),
 440                .gpiomask       = 0x0f,
 441                .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 442                /*                0x04 for some cards ?? */
 443                .needs_tvaudio  = 1,
 444                .tuner_type     = UNSET,
 445                .tuner_addr     = ADDR_UNSET,
 446                .audio_mode_gpio= avermedia_tvphone_audio,
 447                .has_remote     = 1,
 448        },
 449        [BTTV_BOARD_MATRIX_VISION] = {
 450                .name           = "MATRIX-Vision MV-Delta",
 451                .video_inputs   = 5,
 452                /* .audio_inputs= 1, */
 453                .svhs           = 3,
 454                .gpiomask       = 0,
 455                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 456                .gpiomux        = { 0 },
 457                .needs_tvaudio  = 1,
 458                .tuner_type     = TUNER_ABSENT,
 459                .tuner_addr     = ADDR_UNSET,
 460        },
 461
 462        /* ---- card 0x08 ---------------------------------- */
 463        [BTTV_BOARD_FLYVIDEO] = {
 464                .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 465                .video_inputs   = 4,
 466                /* .audio_inputs= 1, */
 467                .svhs           = 2,
 468                .gpiomask       = 0xc00,
 469                .muxsel         = MUXSEL(2, 3, 1, 1),
 470                .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 471                .gpiomute       = 0xc00,
 472                .needs_tvaudio  = 1,
 473                .pll            = PLL_28,
 474                .tuner_type     = UNSET,
 475                .tuner_addr     = ADDR_UNSET,
 476        },
 477        [BTTV_BOARD_TURBOTV] = {
 478                .name           = "IMS/IXmicro TurboTV",
 479                .video_inputs   = 3,
 480                /* .audio_inputs= 1, */
 481                .svhs           = 2,
 482                .gpiomask       = 3,
 483                .muxsel         = MUXSEL(2, 3, 1, 1),
 484                .gpiomux        = { 1, 1, 2, 3 },
 485                .needs_tvaudio  = 0,
 486                .pll            = PLL_28,
 487                .tuner_type     = TUNER_TEMIC_PAL,
 488                .tuner_addr     = ADDR_UNSET,
 489        },
 490        [BTTV_BOARD_HAUPPAUGE878] = {
 491                .name           = "Hauppauge (bt878)",
 492                .video_inputs   = 4,
 493                /* .audio_inputs= 1, */
 494                .svhs           = 2,
 495                .gpiomask       = 0x0f, /* old: 7 */
 496                .muxsel         = MUXSEL(2, 0, 1, 1),
 497                .gpiomux        = { 0, 1, 2, 3 },
 498                .gpiomute       = 4,
 499                .needs_tvaudio  = 1,
 500                .pll            = PLL_28,
 501                .tuner_type     = UNSET,
 502                .tuner_addr     = ADDR_UNSET,
 503        },
 504        [BTTV_BOARD_MIROPRO] = {
 505                .name           = "MIRO PCTV pro",
 506                .video_inputs   = 3,
 507                /* .audio_inputs= 1, */
 508                .svhs           = 2,
 509                .gpiomask       = 0x3014f,
 510                .muxsel         = MUXSEL(2, 3, 1, 1),
 511                .gpiomux        = { 0x20001,0x10001, 0, 0 },
 512                .gpiomute       = 10,
 513                .needs_tvaudio  = 1,
 514                .tuner_type     = UNSET,
 515                .tuner_addr     = ADDR_UNSET,
 516        },
 517
 518        /* ---- card 0x0c ---------------------------------- */
 519        [BTTV_BOARD_ADSTECH_TV] = {
 520                .name           = "ADS Technologies Channel Surfer TV (bt848)",
 521                .video_inputs   = 3,
 522                /* .audio_inputs= 1, */
 523                .svhs           = 2,
 524                .gpiomask       = 15,
 525                .muxsel         = MUXSEL(2, 3, 1, 1),
 526                .gpiomux        = { 13, 14, 11, 7 },
 527                .needs_tvaudio  = 1,
 528                .tuner_type     = UNSET,
 529                .tuner_addr     = ADDR_UNSET,
 530        },
 531        [BTTV_BOARD_AVERMEDIA98] = {
 532                .name           = "AVerMedia TVCapture 98",
 533                .video_inputs   = 3,
 534                /* .audio_inputs= 4, */
 535                .svhs           = 2,
 536                .gpiomask       = 15,
 537                .muxsel         = MUXSEL(2, 3, 1, 1),
 538                .gpiomux        = { 13, 14, 11, 7 },
 539                .needs_tvaudio  = 1,
 540                .msp34xx_alt    = 1,
 541                .pll            = PLL_28,
 542                .tuner_type     = TUNER_PHILIPS_PAL,
 543                .tuner_addr     = ADDR_UNSET,
 544                .audio_mode_gpio= avermedia_tv_stereo_audio,
 545                .no_gpioirq     = 1,
 546        },
 547        [BTTV_BOARD_VHX] = {
 548                .name           = "Aimslab Video Highway Xtreme (VHX)",
 549                .video_inputs   = 3,
 550                /* .audio_inputs= 1, */
 551                .svhs           = 2,
 552                .gpiomask       = 7,
 553                .muxsel         = MUXSEL(2, 3, 1, 1),
 554                .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 555                .gpiomute       = 4,
 556                .needs_tvaudio  = 1,
 557                .pll            = PLL_28,
 558                .tuner_type     = UNSET,
 559                .tuner_addr     = ADDR_UNSET,
 560        },
 561        [BTTV_BOARD_ZOLTRIX] = {
 562                .name           = "Zoltrix TV-Max",
 563                .video_inputs   = 3,
 564                /* .audio_inputs= 1, */
 565                .svhs           = 2,
 566                .gpiomask       = 15,
 567                .muxsel         = MUXSEL(2, 3, 1, 1),
 568                .gpiomux        = { 0, 0, 1, 0 },
 569                .gpiomute       = 10,
 570                .needs_tvaudio  = 1,
 571                .tuner_type     = UNSET,
 572                .tuner_addr     = ADDR_UNSET,
 573        },
 574
 575        /* ---- card 0x10 ---------------------------------- */
 576        [BTTV_BOARD_PIXVIEWPLAYTV] = {
 577                .name           = "Prolink Pixelview PlayTV (bt878)",
 578                .video_inputs   = 3,
 579                /* .audio_inputs= 1, */
 580                .svhs           = 2,
 581                .gpiomask       = 0x01fe00,
 582                .muxsel         = MUXSEL(2, 3, 1, 1),
 583                /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 584                .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 585                .gpiomute       = 0x002000,
 586                .needs_tvaudio  = 1,
 587                .pll            = PLL_28,
 588                .tuner_type     = UNSET,
 589                .tuner_addr     = ADDR_UNSET,
 590        },
 591        [BTTV_BOARD_WINVIEW_601] = {
 592                .name           = "Leadtek WinView 601",
 593                .video_inputs   = 3,
 594                /* .audio_inputs= 1, */
 595                .svhs           = 2,
 596                .gpiomask       = 0x8300f8,
 597                .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 598                .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 599                .gpiomute       = 0xcfa007,
 600                .needs_tvaudio  = 1,
 601                .tuner_type     = UNSET,
 602                .tuner_addr     = ADDR_UNSET,
 603                .volume_gpio    = winview_volume,
 604                .has_radio      = 1,
 605        },
 606        [BTTV_BOARD_AVEC_INTERCAP] = {
 607                .name           = "AVEC Intercapture",
 608                .video_inputs   = 3,
 609                /* .audio_inputs= 2, */
 610                .svhs           = 2,
 611                .gpiomask       = 0,
 612                .muxsel         = MUXSEL(2, 3, 1, 1),
 613                .gpiomux        = { 1, 0, 0, 0 },
 614                .needs_tvaudio  = 1,
 615                .tuner_type     = UNSET,
 616                .tuner_addr     = ADDR_UNSET,
 617        },
 618        [BTTV_BOARD_LIFE_FLYKIT] = {
 619                .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 620                .video_inputs   = 4,
 621                /* .audio_inputs= 1, */
 622                .svhs           = NO_SVHS,
 623                .gpiomask       = 0x8dff00,
 624                .muxsel         = MUXSEL(2, 3, 1, 1),
 625                .gpiomux        = { 0 },
 626                .no_msp34xx     = 1,
 627                .tuner_type     = TUNER_ABSENT,
 628                .tuner_addr     = ADDR_UNSET,
 629        },
 630
 631        /* ---- card 0x14 ---------------------------------- */
 632        [BTTV_BOARD_CEI_RAFFLES] = {
 633                .name           = "CEI Raffles Card",
 634                .video_inputs   = 3,
 635                /* .audio_inputs= 3, */
 636                .svhs           = 2,
 637                .muxsel         = MUXSEL(2, 3, 1, 1),
 638                .tuner_type     = UNSET,
 639                .tuner_addr     = ADDR_UNSET,
 640        },
 641        [BTTV_BOARD_CONFERENCETV] = {
 642                .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 643                .video_inputs   = 4,
 644                /* .audio_inputs= 2,  tuner, line in */
 645                .svhs           = 2,
 646                .gpiomask       = 0x1800,
 647                .muxsel         = MUXSEL(2, 3, 1, 1),
 648                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 649                .gpiomute       = 0x1800,
 650                .pll            = PLL_28,
 651                .tuner_type     = TUNER_PHILIPS_PAL_I,
 652                .tuner_addr     = ADDR_UNSET,
 653        },
 654        [BTTV_BOARD_PHOEBE_TVMAS] = {
 655                .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 656                .video_inputs   = 3,
 657                /* .audio_inputs= 1, */
 658                .svhs           = 2,
 659                .gpiomask       = 0xc00,
 660                .muxsel         = MUXSEL(2, 3, 1, 1),
 661                .gpiomux        = { 0, 1, 0x800, 0x400 },
 662                .gpiomute       = 0xc00,
 663                .needs_tvaudio  = 1,
 664                .pll            = PLL_28,
 665                .tuner_type     = UNSET,
 666                .tuner_addr     = ADDR_UNSET,
 667        },
 668        [BTTV_BOARD_MODTEC_205] = {
 669                .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 670                .video_inputs   = 3,
 671                /* .audio_inputs= 1, */
 672                .svhs           = NO_SVHS,
 673                .has_dig_in     = 1,
 674                .gpiomask       = 7,
 675                .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 676                /* .digital_mode= DIGITAL_MODE_CAMERA, */
 677                .gpiomux        = { 0, 0, 0, 0 },
 678                .no_msp34xx     = 1,
 679                .pll            = PLL_28,
 680                .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 681                .tuner_addr     = ADDR_UNSET,
 682        },
 683
 684        /* ---- card 0x18 ---------------------------------- */
 685        [BTTV_BOARD_MAGICTVIEW061] = {
 686                .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 687                .video_inputs   = 3,
 688                /* .audio_inputs= 1, */
 689                .svhs           = 2,
 690                .gpiomask       = 0xe00,
 691                .muxsel         = MUXSEL(2, 3, 1, 1),
 692                .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 693                .gpiomute       = 0xc00,
 694                .needs_tvaudio  = 1,
 695                .pll            = PLL_28,
 696                .tuner_type     = UNSET,
 697                .tuner_addr     = ADDR_UNSET,
 698                .has_remote     = 1,
 699        },
 700        [BTTV_BOARD_VOBIS_BOOSTAR] = {
 701                .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 702                .video_inputs   = 3,
 703                /* .audio_inputs= 1, */
 704                .svhs           = 2,
 705                .gpiomask       = 0x1f0fff,
 706                .muxsel         = MUXSEL(2, 3, 1, 1),
 707                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 708                .gpiomute       = 0x40000,
 709                .needs_tvaudio  = 0,
 710                .tuner_type     = TUNER_PHILIPS_PAL,
 711                .tuner_addr     = ADDR_UNSET,
 712                .audio_mode_gpio= terratv_audio,
 713        },
 714        [BTTV_BOARD_HAUPPAUG_WCAM] = {
 715                .name           = "Hauppauge WinCam newer (bt878)",
 716                .video_inputs   = 4,
 717                /* .audio_inputs= 1, */
 718                .svhs           = 3,
 719                .gpiomask       = 7,
 720                .muxsel         = MUXSEL(2, 0, 1, 1),
 721                .gpiomux        = { 0, 1, 2, 3 },
 722                .gpiomute       = 4,
 723                .needs_tvaudio  = 1,
 724                .tuner_type     = UNSET,
 725                .tuner_addr     = ADDR_UNSET,
 726        },
 727        [BTTV_BOARD_MAXI] = {
 728                .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 729                .video_inputs   = 4,
 730                /* .audio_inputs= 2, */
 731                .svhs           = 2,
 732                .gpiomask       = 0x1800,
 733                .muxsel         = MUXSEL(2, 3, 1, 1),
 734                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 735                .gpiomute       = 0x1800,
 736                .pll            = PLL_28,
 737                .tuner_type     = TUNER_PHILIPS_SECAM,
 738                .tuner_addr     = ADDR_UNSET,
 739        },
 740
 741        /* ---- card 0x1c ---------------------------------- */
 742        [BTTV_BOARD_TERRATV] = {
 743                .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 744                .video_inputs   = 3,
 745                /* .audio_inputs= 1, */
 746                .svhs           = 2,
 747                .gpiomask       = 0x1f0fff,
 748                .muxsel         = MUXSEL(2, 3, 1, 1),
 749                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 750                .gpiomute       = 0x40000,
 751                .needs_tvaudio  = 0,
 752                .tuner_type     = TUNER_PHILIPS_PAL,
 753                .tuner_addr     = ADDR_UNSET,
 754                .audio_mode_gpio= terratv_audio,
 755                /* GPIO wiring:
 756                External 20 pin connector (for Active Radio Upgrade board)
 757                gpio00: i2c-sda
 758                gpio01: i2c-scl
 759                gpio02: om5610-data
 760                gpio03: om5610-clk
 761                gpio04: om5610-wre
 762                gpio05: om5610-stereo
 763                gpio06: rds6588-davn
 764                gpio07: Pin 7 n.c.
 765                gpio08: nIOW
 766                gpio09+10: nIOR, nSEL ?? (bt878)
 767                        gpio09: nIOR (bt848)
 768                        gpio10: nSEL (bt848)
 769                Sound Routing:
 770                gpio16: u2-A0 (1st 4052bt)
 771                gpio17: u2-A1
 772                gpio18: u2-nEN
 773                gpio19: u4-A0 (2nd 4052)
 774                gpio20: u4-A1
 775                        u4-nEN - GND
 776                Btspy:
 777                        00000 : Cdrom (internal audio input)
 778                        10000 : ext. Video audio input
 779                        20000 : TV Mono
 780                        a0000 : TV Mono/2
 781                1a0000 : TV Stereo
 782                        30000 : Radio
 783                        40000 : Mute
 784        */
 785
 786        },
 787        [BTTV_BOARD_PXC200] = {
 788                /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 789                .name           = "Imagenation PXC200",
 790                .video_inputs   = 5,
 791                /* .audio_inputs= 1, */
 792                .svhs           = 1, /* was: 4 */
 793                .gpiomask       = 0,
 794                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 795                .gpiomux        = { 0 },
 796                .needs_tvaudio  = 1,
 797                .tuner_type     = TUNER_ABSENT,
 798                .tuner_addr     = ADDR_UNSET,
 799                .muxsel_hook    = PXC200_muxsel,
 800
 801        },
 802        [BTTV_BOARD_FLYVIDEO_98] = {
 803                .name           = "Lifeview FlyVideo 98 LR50",
 804                .video_inputs   = 4,
 805                /* .audio_inputs= 1, */
 806                .svhs           = 2,
 807                .gpiomask       = 0x1800,  /* 0x8dfe00 */
 808                .muxsel         = MUXSEL(2, 3, 1, 1),
 809                .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 810                .gpiomute       = 0x1800,
 811                .pll            = PLL_28,
 812                .tuner_type     = UNSET,
 813                .tuner_addr     = ADDR_UNSET,
 814        },
 815        [BTTV_BOARD_IPROTV] = {
 816                .name           = "Formac iProTV, Formac ProTV I (bt848)",
 817                .video_inputs   = 4,
 818                /* .audio_inputs= 1, */
 819                .svhs           = 3,
 820                .gpiomask       = 1,
 821                .muxsel         = MUXSEL(2, 3, 1, 1),
 822                .gpiomux        = { 1, 0, 0, 0 },
 823                .pll            = PLL_28,
 824                .tuner_type     = TUNER_PHILIPS_PAL,
 825                .tuner_addr     = ADDR_UNSET,
 826        },
 827
 828        /* ---- card 0x20 ---------------------------------- */
 829        [BTTV_BOARD_INTEL_C_S_PCI] = {
 830                .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 831                .video_inputs   = 4,
 832                /* .audio_inputs= 0, */
 833                .svhs           = 2,
 834                .gpiomask       = 0,
 835                .muxsel         = MUXSEL(2, 3, 1, 1),
 836                .gpiomux        = { 0 },
 837                .needs_tvaudio  = 0,
 838                .tuner_type     = TUNER_ABSENT,
 839                .tuner_addr     = ADDR_UNSET,
 840        },
 841        [BTTV_BOARD_TERRATVALUE] = {
 842                .name           = "Terratec TerraTValue Version Bt878",
 843                .video_inputs   = 3,
 844                /* .audio_inputs= 1, */
 845                .svhs           = 2,
 846                .gpiomask       = 0xffff00,
 847                .muxsel         = MUXSEL(2, 3, 1, 1),
 848                .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 849                .gpiomute       = 0x900,
 850                .needs_tvaudio  = 1,
 851                .pll            = PLL_28,
 852                .tuner_type     = TUNER_PHILIPS_PAL,
 853                .tuner_addr     = ADDR_UNSET,
 854        },
 855        [BTTV_BOARD_WINFAST2000] = {
 856                .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 857                .video_inputs   = 4,
 858                /* .audio_inputs= 1, */
 859                .svhs           = 2,
 860                /* TV, CVid, SVid, CVid over SVid connector */
 861                .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 862                /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 863                .gpiomask       = 0xb33000,
 864                .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 865                .gpiomute       = 0x800000,
 866                /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 867                        gpio23 -- hef4052:nEnable (0x800000)
 868                        gpio12 -- hef4052:A1
 869                        gpio13 -- hef4052:A0
 870                0x0000: external audio
 871                0x1000: FM
 872                0x2000: TV
 873                0x3000: n.c.
 874                Note: There exists another variant "Winfast 2000" with tv stereo !?
 875                Note: eeprom only contains FF and pci subsystem id 107d:6606
 876                */
 877                .needs_tvaudio  = 0,
 878                .pll            = PLL_28,
 879                .has_radio      = 1,
 880                .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 881                .tuner_addr     = ADDR_UNSET,
 882                .audio_mode_gpio= winfast2000_audio,
 883                .has_remote     = 1,
 884        },
 885        [BTTV_BOARD_CHRONOS_VS2] = {
 886                .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 887                .video_inputs   = 4,
 888                /* .audio_inputs= 3, */
 889                .svhs           = 2,
 890                .gpiomask       = 0x1800,
 891                .muxsel         = MUXSEL(2, 3, 1, 1),
 892                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 893                .gpiomute       = 0x1800,
 894                .pll            = PLL_28,
 895                .tuner_type     = UNSET,
 896                .tuner_addr     = ADDR_UNSET,
 897        },
 898
 899        /* ---- card 0x24 ---------------------------------- */
 900        [BTTV_BOARD_TYPHOON_TVIEW] = {
 901                .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 902                .video_inputs   = 4,
 903                /* .audio_inputs= 3, */
 904                .svhs           = 2,
 905                .gpiomask       = 0x1800,
 906                .muxsel         = MUXSEL(2, 3, 1, 1),
 907                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 908                .gpiomute       = 0x1800,
 909                .pll            = PLL_28,
 910                .tuner_type     = UNSET,
 911                .tuner_addr     = ADDR_UNSET,
 912                .has_radio      = 1,
 913        },
 914        [BTTV_BOARD_PXELVWPLTVPRO] = {
 915                .name           = "Prolink PixelView PlayTV pro",
 916                .video_inputs   = 3,
 917                /* .audio_inputs= 1, */
 918                .svhs           = 2,
 919                .gpiomask       = 0xff,
 920                .muxsel         = MUXSEL(2, 3, 1, 1),
 921                .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 922                .gpiomute       = 0x29,
 923                .no_msp34xx     = 1,
 924                .pll            = PLL_28,
 925                .tuner_type     = UNSET,
 926                .tuner_addr     = ADDR_UNSET,
 927        },
 928        [BTTV_BOARD_MAGICTVIEW063] = {
 929                .name           = "Askey CPH06X TView99",
 930                .video_inputs   = 4,
 931                /* .audio_inputs= 1, */
 932                .svhs           = 2,
 933                .gpiomask       = 0x551e00,
 934                .muxsel         = MUXSEL(2, 3, 1, 0),
 935                .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 936                .gpiomute       = 0x551c00,
 937                .needs_tvaudio  = 1,
 938                .pll            = PLL_28,
 939                .tuner_type     = TUNER_PHILIPS_PAL_I,
 940                .tuner_addr     = ADDR_UNSET,
 941                .has_remote     = 1,
 942        },
 943        [BTTV_BOARD_PINNACLE] = {
 944                .name           = "Pinnacle PCTV Studio/Rave",
 945                .video_inputs   = 3,
 946                /* .audio_inputs= 1, */
 947                .svhs           = 2,
 948                .gpiomask       = 0x03000F,
 949                .muxsel         = MUXSEL(2, 3, 1, 1),
 950                .gpiomux        = { 2, 0xd0001, 0, 0 },
 951                .gpiomute       = 1,
 952                .needs_tvaudio  = 0,
 953                .pll            = PLL_28,
 954                .tuner_type     = UNSET,
 955                .tuner_addr     = ADDR_UNSET,
 956        },
 957
 958        /* ---- card 0x28 ---------------------------------- */
 959        [BTTV_BOARD_STB2] = {
 960                .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 961                .video_inputs   = 3,
 962                /* .audio_inputs= 1, */
 963                .svhs           = 2,
 964                .gpiomask       = 7,
 965                .muxsel         = MUXSEL(2, 3, 1, 1),
 966                .gpiomux        = { 4, 0, 2, 3 },
 967                .gpiomute       = 1,
 968                .no_msp34xx     = 1,
 969                .needs_tvaudio  = 1,
 970                .tuner_type     = TUNER_PHILIPS_NTSC,
 971                .tuner_addr     = ADDR_UNSET,
 972                .pll            = PLL_28,
 973                .has_radio      = 1,
 974        },
 975        [BTTV_BOARD_AVPHONE98] = {
 976                .name           = "AVerMedia TVPhone 98",
 977                .video_inputs   = 3,
 978                /* .audio_inputs= 4, */
 979                .svhs           = 2,
 980                .gpiomask       = 15,
 981                .muxsel         = MUXSEL(2, 3, 1, 1),
 982                .gpiomux        = { 13, 4, 11, 7 },
 983                .needs_tvaudio  = 1,
 984                .pll            = PLL_28,
 985                .tuner_type     = UNSET,
 986                .tuner_addr     = ADDR_UNSET,
 987                .has_radio      = 1,
 988                .audio_mode_gpio= avermedia_tvphone_audio,
 989        },
 990        [BTTV_BOARD_PV951] = {
 991                .name           = "ProVideo PV951", /* pic16c54 */
 992                .video_inputs   = 3,
 993                /* .audio_inputs= 1, */
 994                .svhs           = 2,
 995                .gpiomask       = 0,
 996                .muxsel         = MUXSEL(2, 3, 1, 1),
 997                .gpiomux        = { 0, 0, 0, 0},
 998                .needs_tvaudio  = 1,
 999                .no_msp34xx     = 1,
1000                .pll            = PLL_28,
1001                .tuner_type     = TUNER_PHILIPS_PAL_I,
1002                .tuner_addr     = ADDR_UNSET,
1003        },
1004        [BTTV_BOARD_ONAIR_TV] = {
1005                .name           = "Little OnAir TV",
1006                .video_inputs   = 3,
1007                /* .audio_inputs= 1, */
1008                .svhs           = 2,
1009                .gpiomask       = 0xe00b,
1010                .muxsel         = MUXSEL(2, 3, 1, 1),
1011                .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1012                .gpiomute       = 0xff3ffc,
1013                .no_msp34xx     = 1,
1014                .tuner_type     = UNSET,
1015                .tuner_addr     = ADDR_UNSET,
1016        },
1017
1018        /* ---- card 0x2c ---------------------------------- */
1019        [BTTV_BOARD_SIGMA_TVII_FM] = {
1020                .name           = "Sigma TVII-FM",
1021                .video_inputs   = 2,
1022                /* .audio_inputs= 1, */
1023                .svhs           = NO_SVHS,
1024                .gpiomask       = 3,
1025                .muxsel         = MUXSEL(2, 3, 1, 1),
1026                .gpiomux        = { 1, 1, 0, 2 },
1027                .gpiomute       = 3,
1028                .no_msp34xx     = 1,
1029                .pll            = PLL_NONE,
1030                .tuner_type     = UNSET,
1031                .tuner_addr     = ADDR_UNSET,
1032        },
1033        [BTTV_BOARD_MATRIX_VISION2] = {
1034                .name           = "MATRIX-Vision MV-Delta 2",
1035                .video_inputs   = 5,
1036                /* .audio_inputs= 1, */
1037                .svhs           = 3,
1038                .gpiomask       = 0,
1039                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1040                .gpiomux        = { 0 },
1041                .no_msp34xx     = 1,
1042                .pll            = PLL_28,
1043                .tuner_type     = TUNER_ABSENT,
1044                .tuner_addr     = ADDR_UNSET,
1045        },
1046        [BTTV_BOARD_ZOLTRIX_GENIE] = {
1047                .name           = "Zoltrix Genie TV/FM",
1048                .video_inputs   = 3,
1049                /* .audio_inputs= 1, */
1050                .svhs           = 2,
1051                .gpiomask       = 0xbcf03f,
1052                .muxsel         = MUXSEL(2, 3, 1, 1),
1053                .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1054                .gpiomute       = 0xbcb03f,
1055                .no_msp34xx     = 1,
1056                .pll            = PLL_28,
1057                .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1058                .tuner_addr     = ADDR_UNSET,
1059        },
1060        [BTTV_BOARD_TERRATVRADIO] = {
1061                .name           = "Terratec TV/Radio+",
1062                .video_inputs   = 3,
1063                /* .audio_inputs= 1, */
1064                .svhs           = 2,
1065                .gpiomask       = 0x70000,
1066                .muxsel         = MUXSEL(2, 3, 1, 1),
1067                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1068                .gpiomute       = 0x40000,
1069                .needs_tvaudio  = 1,
1070                .no_msp34xx     = 1,
1071                .pll            = PLL_35,
1072                .tuner_type     = TUNER_PHILIPS_PAL_I,
1073                .tuner_addr     = ADDR_UNSET,
1074                .has_radio      = 1,
1075        },
1076
1077        /* ---- card 0x30 ---------------------------------- */
1078        [BTTV_BOARD_DYNALINK] = {
1079                .name           = "Askey CPH03x/ Dynalink Magic TView",
1080                .video_inputs   = 3,
1081                /* .audio_inputs= 1, */
1082                .svhs           = 2,
1083                .gpiomask       = 15,
1084                .muxsel         = MUXSEL(2, 3, 1, 1),
1085                .gpiomux        = {2,0,0,0 },
1086                .gpiomute       = 1,
1087                .needs_tvaudio  = 1,
1088                .pll            = PLL_28,
1089                .tuner_type     = UNSET,
1090                .tuner_addr     = ADDR_UNSET,
1091        },
1092        [BTTV_BOARD_GVBCTV3PCI] = {
1093                .name           = "IODATA GV-BCTV3/PCI",
1094                .video_inputs   = 3,
1095                /* .audio_inputs= 1, */
1096                .svhs           = 2,
1097                .gpiomask       = 0x010f00,
1098                .muxsel         = MUXSEL(2, 3, 0, 0),
1099                .gpiomux        = {0x10000, 0, 0x10000, 0 },
1100                .no_msp34xx     = 1,
1101                .pll            = PLL_28,
1102                .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1103                .tuner_addr     = ADDR_UNSET,
1104                .audio_mode_gpio= gvbctv3pci_audio,
1105        },
1106        [BTTV_BOARD_PXELVWPLTVPAK] = {
1107                .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1108                .video_inputs   = 5,
1109                /* .audio_inputs= 1, */
1110                .svhs           = 3,
1111                .has_dig_in     = 1,
1112                .gpiomask       = 0xAA0000,
1113                .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1114                /* .digital_mode= DIGITAL_MODE_CAMERA, */
1115                .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1116                .gpiomute       = 0xa8000,
1117                .no_msp34xx     = 1,
1118                .pll            = PLL_28,
1119                .tuner_type     = TUNER_PHILIPS_PAL_I,
1120                .tuner_addr     = ADDR_UNSET,
1121                .has_remote     = 1,
1122                /* GPIO wiring: (different from Rev.4C !)
1123                        GPIO17: U4.A0 (first hef4052bt)
1124                        GPIO19: U4.A1
1125                        GPIO20: U5.A1 (second hef4052bt)
1126                        GPIO21: U4.nEN
1127                        GPIO22: BT832 Reset Line
1128                        GPIO23: A5,A0, U5,nEN
1129                Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1130                */
1131        },
1132        [BTTV_BOARD_EAGLE] = {
1133                .name           = "Eagle Wireless Capricorn2 (bt878A)",
1134                .video_inputs   = 4,
1135                /* .audio_inputs= 1, */
1136                .svhs           = 2,
1137                .gpiomask       = 7,
1138                .muxsel         = MUXSEL(2, 0, 1, 1),
1139                .gpiomux        = { 0, 1, 2, 3 },
1140                .gpiomute       = 4,
1141                .pll            = PLL_28,
1142                .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1143                .tuner_addr     = ADDR_UNSET,
1144        },
1145
1146        /* ---- card 0x34 ---------------------------------- */
1147        [BTTV_BOARD_PINNACLEPRO] = {
1148                /* David Härdeman <david@2gen.com> */
1149                .name           = "Pinnacle PCTV Studio Pro",
1150                .video_inputs   = 4,
1151                /* .audio_inputs= 1, */
1152                .svhs           = 3,
1153                .gpiomask       = 0x03000F,
1154                .muxsel         = MUXSEL(2, 3, 1, 1),
1155                .gpiomux        = { 1, 0xd0001, 0, 0 },
1156                .gpiomute       = 10,
1157                                /* sound path (5 sources):
1158                                MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1159                                        0= ext. Audio IN
1160                                        1= from MUX2
1161                                        2= Mono TV sound from Tuner
1162                                        3= not connected
1163                                MUX2 (mask 0x30000):
1164                                        0,2,3= from MSP34xx
1165                                        1= FM stereo Radio from Tuner */
1166                .needs_tvaudio  = 0,
1167                .pll            = PLL_28,
1168                .tuner_type     = UNSET,
1169                .tuner_addr     = ADDR_UNSET,
1170        },
1171        [BTTV_BOARD_TVIEW_RDS_FM] = {
1172                /* Claas Langbehn <claas@bigfoot.com>,
1173                Sven Grothklags <sven@upb.de> */
1174                .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1175                .video_inputs   = 4,
1176                /* .audio_inputs= 3, */
1177                .svhs           = 2,
1178                .gpiomask       = 0x1c,
1179                .muxsel         = MUXSEL(2, 3, 1, 1),
1180                .gpiomux        = { 0, 0, 0x10, 8 },
1181                .gpiomute       = 4,
1182                .needs_tvaudio  = 1,
1183                .pll            = PLL_28,
1184                .tuner_type     = TUNER_PHILIPS_PAL,
1185                .tuner_addr     = ADDR_UNSET,
1186                .has_radio      = 1,
1187        },
1188        [BTTV_BOARD_LIFETEC_9415] = {
1189                /* Tim Röstermundt <rosterm@uni-muenster.de>
1190                in de.comp.os.unix.linux.hardware:
1191                        options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1192                        gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1193                        options tuner type=5 */
1194                .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1195                .video_inputs   = 4,
1196                /* .audio_inputs= 1, */
1197                .svhs           = 2,
1198                .gpiomask       = 0x18e0,
1199                .muxsel         = MUXSEL(2, 3, 1, 1),
1200                .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1201                .gpiomute       = 0x18e0,
1202                        /* For cards with tda9820/tda9821:
1203                                0x0000: Tuner normal stereo
1204                                0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1205                                0x0880: Tuner A2 stereo */
1206                .pll            = PLL_28,
1207                .tuner_type     = UNSET,
1208                .tuner_addr     = ADDR_UNSET,
1209        },
1210        [BTTV_BOARD_BESTBUY_EASYTV] = {
1211                /* Miguel Angel Alvarez <maacruz@navegalia.com>
1212                old Easy TV BT848 version (model CPH031) */
1213                .name           = "Askey CPH031/ BESTBUY Easy TV",
1214                .video_inputs   = 4,
1215                /* .audio_inputs= 1, */
1216                .svhs           = 2,
1217                .gpiomask       = 0xF,
1218                .muxsel         = MUXSEL(2, 3, 1, 0),
1219                .gpiomux        = { 2, 0, 0, 0 },
1220                .gpiomute       = 10,
1221                .needs_tvaudio  = 0,
1222                .pll            = PLL_28,
1223                .tuner_type     = TUNER_TEMIC_PAL,
1224                .tuner_addr     = ADDR_UNSET,
1225        },
1226
1227        /* ---- card 0x38 ---------------------------------- */
1228        [BTTV_BOARD_FLYVIDEO_98FM] = {
1229                /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1230                .name           = "Lifeview FlyVideo 98FM LR50",
1231                .video_inputs   = 4,
1232                /* .audio_inputs= 3, */
1233                .svhs           = 2,
1234                .gpiomask       = 0x1800,
1235                .muxsel         = MUXSEL(2, 3, 1, 1),
1236                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1237                .gpiomute       = 0x1800,
1238                .pll            = PLL_28,
1239                .tuner_type     = TUNER_PHILIPS_PAL,
1240                .tuner_addr     = ADDR_UNSET,
1241        },
1242                /* This is the ultimate cheapo capture card
1243                * just a BT848A on a small PCB!
1244                * Steve Hosgood <steve@equiinet.com> */
1245        [BTTV_BOARD_GRANDTEC] = {
1246                .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1247                .video_inputs   = 2,
1248                /* .audio_inputs= 0, */
1249                .svhs           = 1,
1250                .gpiomask       = 0,
1251                .muxsel         = MUXSEL(3, 1),
1252                .gpiomux        = { 0 },
1253                .needs_tvaudio  = 0,
1254                .no_msp34xx     = 1,
1255                .pll            = PLL_35,
1256                .tuner_type     = TUNER_ABSENT,
1257                .tuner_addr     = ADDR_UNSET,
1258        },
1259        [BTTV_BOARD_ASKEY_CPH060] = {
1260                /* Daniel Herrington <daniel.herrington@home.com> */
1261                .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1262                .video_inputs   = 3,
1263                /* .audio_inputs= 1, */
1264                .svhs           = 2,
1265                .gpiomask       = 0xe00,
1266                .muxsel         = MUXSEL(2, 3, 1, 1),
1267                .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1268                .gpiomute       = 0x800,
1269                .needs_tvaudio  = 1,
1270                .pll            = PLL_28,
1271                .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1272                .tuner_addr     = ADDR_UNSET,
1273        },
1274        [BTTV_BOARD_ASKEY_CPH03X] = {
1275                /* Matti Mottus <mottus@physic.ut.ee> */
1276                .name           = "Askey CPH03x TV Capturer",
1277                .video_inputs   = 4,
1278                /* .audio_inputs= 1, */
1279                .svhs           = 2,
1280                .gpiomask       = 0x03000F,
1281                .muxsel         = MUXSEL(2, 3, 1, 0),
1282                .gpiomux        = { 2, 0, 0, 0 },
1283                .gpiomute       = 1,
1284                .pll            = PLL_28,
1285                .tuner_type     = TUNER_TEMIC_PAL,
1286                .tuner_addr     = ADDR_UNSET,
1287                .has_remote     = 1,
1288        },
1289
1290        /* ---- card 0x3c ---------------------------------- */
1291        [BTTV_BOARD_MM100PCTV] = {
1292                /* Philip Blundell <philb@gnu.org> */
1293                .name           = "Modular Technology MM100PCTV",
1294                .video_inputs   = 2,
1295                /* .audio_inputs= 2, */
1296                .svhs           = NO_SVHS,
1297                .gpiomask       = 11,
1298                .muxsel         = MUXSEL(2, 3, 1, 1),
1299                .gpiomux        = { 2, 0, 0, 1 },
1300                .gpiomute       = 8,
1301                .pll            = PLL_35,
1302                .tuner_type     = TUNER_TEMIC_PAL,
1303                .tuner_addr     = ADDR_UNSET,
1304        },
1305        [BTTV_BOARD_GMV1] = {
1306                /* Adrian Cox <adrian@humboldt.co.uk */
1307                .name           = "AG Electronics GMV1",
1308                .video_inputs   = 2,
1309                /* .audio_inputs= 0, */
1310                .svhs           = 1,
1311                .gpiomask       = 0xF,
1312                .muxsel         = MUXSEL(2, 2),
1313                .gpiomux        = { },
1314                .no_msp34xx     = 1,
1315                .needs_tvaudio  = 0,
1316                .pll            = PLL_28,
1317                .tuner_type     = TUNER_ABSENT,
1318                .tuner_addr     = ADDR_UNSET,
1319        },
1320        [BTTV_BOARD_BESTBUY_EASYTV2] = {
1321                /* Miguel Angel Alvarez <maacruz@navegalia.com>
1322                new Easy TV BT878 version (model CPH061)
1323                special thanks to Informatica Mieres for providing the card */
1324                .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1325                .video_inputs   = 3,
1326                /* .audio_inputs= 2, */
1327                .svhs           = 2,
1328                .gpiomask       = 0xFF,
1329                .muxsel         = MUXSEL(2, 3, 1, 0),
1330                .gpiomux        = { 1, 0, 4, 4 },
1331                .gpiomute       = 9,
1332                .needs_tvaudio  = 0,
1333                .pll            = PLL_28,
1334                .tuner_type     = TUNER_PHILIPS_PAL,
1335                .tuner_addr     = ADDR_UNSET,
1336        },
1337        [BTTV_BOARD_ATI_TVWONDER] = {
1338                /* Lukas Gebauer <geby@volny.cz> */
1339                .name           = "ATI TV-Wonder",
1340                .video_inputs   = 3,
1341                /* .audio_inputs= 1, */
1342                .svhs           = 2,
1343                .gpiomask       = 0xf03f,
1344                .muxsel         = MUXSEL(2, 3, 1, 0),
1345                .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1346                .gpiomute       = 0xbffe,
1347                .pll            = PLL_28,
1348                .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1349                .tuner_addr     = ADDR_UNSET,
1350        },
1351
1352        /* ---- card 0x40 ---------------------------------- */
1353        [BTTV_BOARD_ATI_TVWONDERVE] = {
1354                /* Lukas Gebauer <geby@volny.cz> */
1355                .name           = "ATI TV-Wonder VE",
1356                .video_inputs   = 2,
1357                /* .audio_inputs= 1, */
1358                .svhs           = NO_SVHS,
1359                .gpiomask       = 1,
1360                .muxsel         = MUXSEL(2, 3, 0, 1),
1361                .gpiomux        = { 0, 0, 1, 0 },
1362                .no_msp34xx     = 1,
1363                .pll            = PLL_28,
1364                .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1365                .tuner_addr     = ADDR_UNSET,
1366        },
1367        [BTTV_BOARD_FLYVIDEO2000] = {
1368                /* DeeJay <deejay@westel900.net (2000S) */
1369                .name           = "Lifeview FlyVideo 2000S LR90",
1370                .video_inputs   = 3,
1371                /* .audio_inputs= 3, */
1372                .svhs           = 2,
1373                .gpiomask       = 0x18e0,
1374                .muxsel         = MUXSEL(2, 3, 0, 1),
1375                                /* Radio changed from 1e80 to 0x800 to make
1376                                FlyVideo2000S in .hu happy (gm)*/
1377                                /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1378                .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1379                .gpiomute       = 0x1800,
1380                .audio_mode_gpio= fv2000s_audio,
1381                .no_msp34xx     = 1,
1382                .needs_tvaudio  = 1,
1383                .pll            = PLL_28,
1384                .tuner_type     = TUNER_PHILIPS_PAL,
1385                .tuner_addr     = ADDR_UNSET,
1386        },
1387        [BTTV_BOARD_TERRATVALUER] = {
1388                .name           = "Terratec TValueRadio",
1389                .video_inputs   = 3,
1390                /* .audio_inputs= 1, */
1391                .svhs           = 2,
1392                .gpiomask       = 0xffff00,
1393                .muxsel         = MUXSEL(2, 3, 1, 1),
1394                .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1395                .gpiomute       = 0x900,
1396                .needs_tvaudio  = 1,
1397                .pll            = PLL_28,
1398                .tuner_type     = TUNER_PHILIPS_PAL,
1399                .tuner_addr     = ADDR_UNSET,
1400                .has_radio      = 1,
1401        },
1402        [BTTV_BOARD_GVBCTV4PCI] = {
1403                /* TANAKA Kei <peg00625@nifty.com> */
1404                .name           = "IODATA GV-BCTV4/PCI",
1405                .video_inputs   = 3,
1406                /* .audio_inputs= 1, */
1407                .svhs           = 2,
1408                .gpiomask       = 0x010f00,
1409                .muxsel         = MUXSEL(2, 3, 0, 0),
1410                .gpiomux        = {0x10000, 0, 0x10000, 0 },
1411                .no_msp34xx     = 1,
1412                .pll            = PLL_28,
1413                .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1414                .tuner_addr     = ADDR_UNSET,
1415                .audio_mode_gpio= gvbctv3pci_audio,
1416        },
1417
1418        /* ---- card 0x44 ---------------------------------- */
1419        [BTTV_BOARD_VOODOOTV_FM] = {
1420                .name           = "3Dfx VoodooTV FM (Euro)",
1421                /* try "insmod msp3400 simple=0" if you have
1422                * sound problems with this card. */
1423                .video_inputs   = 4,
1424                /* .audio_inputs= 1, */
1425                .svhs           = NO_SVHS,
1426                .gpiomask       = 0x4f8a00,
1427                /* 0x100000: 1=MSP enabled (0=disable again)
1428                * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1429                .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1430                .gpiomute       = 0x947fff,
1431                /* tvtuner, radio,   external,internal, mute,  stereo
1432                * tuner, Composit, SVid, Composit-on-Svid-adapter */
1433                .muxsel         = MUXSEL(2, 3, 0, 1),
1434                .tuner_type     = TUNER_MT2032,
1435                .tuner_addr     = ADDR_UNSET,
1436                .pll            = PLL_28,
1437                .has_radio      = 1,
1438        },
1439        [BTTV_BOARD_VOODOOTV_200] = {
1440                .name           = "VoodooTV 200 (USA)",
1441                /* try "insmod msp3400 simple=0" if you have
1442                * sound problems with this card. */
1443                .video_inputs   = 4,
1444                /* .audio_inputs= 1, */
1445                .svhs           = NO_SVHS,
1446                .gpiomask       = 0x4f8a00,
1447                /* 0x100000: 1=MSP enabled (0=disable again)
1448                * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1449                .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1450                .gpiomute       = 0x947fff,
1451                /* tvtuner, radio,   external,internal, mute,  stereo
1452                * tuner, Composit, SVid, Composit-on-Svid-adapter */
1453                .muxsel         = MUXSEL(2, 3, 0, 1),
1454                .tuner_type     = TUNER_MT2032,
1455                .tuner_addr     = ADDR_UNSET,
1456                .pll            = PLL_28,
1457                .has_radio      = 1,
1458        },
1459        [BTTV_BOARD_AIMMS] = {
1460                /* Philip Blundell <pb@nexus.co.uk> */
1461                .name           = "Active Imaging AIMMS",
1462                .video_inputs   = 1,
1463                /* .audio_inputs= 0, */
1464                .tuner_type     = TUNER_ABSENT,
1465                .tuner_addr     = ADDR_UNSET,
1466                .pll            = PLL_28,
1467                .muxsel         = MUXSEL(2),
1468                .gpiomask       = 0
1469        },
1470        [BTTV_BOARD_PV_BT878P_PLUS] = {
1471                /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1472                .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1473                .video_inputs   = 3,
1474                /* .audio_inputs= 4, */
1475                .svhs           = 2,
1476                .gpiomask       = 15,
1477                .muxsel         = MUXSEL(2, 3, 1, 1),
1478                .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1479                .gpiomute       = 13,
1480                .needs_tvaudio  = 1,
1481                .pll            = PLL_28,
1482                .tuner_type     = TUNER_LG_PAL_I_FM,
1483                .tuner_addr     = ADDR_UNSET,
1484                .has_remote     = 1,
1485                /* GPIO wiring:
1486                        GPIO0: U4.A0 (hef4052bt)
1487                        GPIO1: U4.A1
1488                        GPIO2: U4.A1 (second hef4052bt)
1489                        GPIO3: U4.nEN, U5.A0, A5.nEN
1490                        GPIO8-15: vrd866b ?
1491                */
1492        },
1493        [BTTV_BOARD_FLYVIDEO98EZ] = {
1494                .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1495                .video_inputs   = 4,
1496                /* .audio_inputs= 0, */
1497                .svhs           = 2,
1498                /* AV1, AV2, SVHS, CVid adapter on SVHS */
1499                .muxsel         = MUXSEL(2, 3, 1, 1),
1500                .pll            = PLL_28,
1501                .no_msp34xx     = 1,
1502                .tuner_type     = TUNER_ABSENT,
1503                .tuner_addr     = ADDR_UNSET,
1504        },
1505
1506        /* ---- card 0x48 ---------------------------------- */
1507        [BTTV_BOARD_PV_BT878P_9B] = {
1508                /* Dariusz Kowalewski <darekk@automex.pl> */
1509                .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1510                .video_inputs   = 4,
1511                /* .audio_inputs= 1, */
1512                .svhs           = 2,
1513                .gpiomask       = 0x3f,
1514                .muxsel         = MUXSEL(2, 3, 1, 1),
1515                .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1516                .gpiomute       = 0x09,
1517                .needs_tvaudio  = 1,
1518                .no_msp34xx     = 1,
1519                .pll            = PLL_28,
1520                .tuner_type     = TUNER_PHILIPS_PAL,
1521                .tuner_addr     = ADDR_UNSET,
1522                .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1523                .has_radio      = 1,  /* Note: not all cards have radio */
1524                .has_remote     = 1,
1525                /* GPIO wiring:
1526                        GPIO0: A0 hef4052
1527                        GPIO1: A1 hef4052
1528                        GPIO3: nEN hef4052
1529                        GPIO8-15: vrd866b
1530                        GPIO20,22,23: R30,R29,R28
1531                */
1532        },
1533        [BTTV_BOARD_SENSORAY311_611] = {
1534                /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1535                /* you must jumper JP5 for the 311 card (PC/104+) to work */
1536                .name           = "Sensoray 311/611",
1537                .video_inputs   = 5,
1538                /* .audio_inputs= 0, */
1539                .svhs           = 4,
1540                .gpiomask       = 0,
1541                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1542                .gpiomux        = { 0 },
1543                .needs_tvaudio  = 0,
1544                .tuner_type     = TUNER_ABSENT,
1545                .tuner_addr     = ADDR_UNSET,
1546        },
1547        [BTTV_BOARD_RV605] = {
1548                /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1549                .name           = "RemoteVision MX (RV605)",
1550                .video_inputs   = 16,
1551                /* .audio_inputs= 0, */
1552                .svhs           = NO_SVHS,
1553                .gpiomask       = 0x00,
1554                .gpiomask2      = 0x07ff,
1555                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1556                .no_msp34xx     = 1,
1557                .tuner_type     = TUNER_ABSENT,
1558                .tuner_addr     = ADDR_UNSET,
1559                .muxsel_hook    = rv605_muxsel,
1560        },
1561        [BTTV_BOARD_POWERCLR_MTV878] = {
1562                .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1563                .video_inputs   = 3,
1564                /* .audio_inputs= 2, */
1565                .svhs           = 2,
1566                .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1567                .muxsel         = MUXSEL(2, 1, 1),
1568                .gpiomux        = { 0, 1, 2, 2 },
1569                .gpiomute       = 4,
1570                .needs_tvaudio  = 0,
1571                .tuner_type     = TUNER_PHILIPS_PAL,
1572                .tuner_addr     = ADDR_UNSET,
1573                .pll            = PLL_28,
1574                .has_radio      = 1,
1575        },
1576
1577        /* ---- card 0x4c ---------------------------------- */
1578        [BTTV_BOARD_WINDVR] = {
1579                /* Masaki Suzuki <masaki@btree.org> */
1580                .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1581                .video_inputs   = 3,
1582                /* .audio_inputs= 1, */
1583                .svhs           = 2,
1584                .gpiomask       = 0x140007,
1585                .muxsel         = MUXSEL(2, 3, 1, 1),
1586                .gpiomux        = { 0, 1, 2, 3 },
1587                .gpiomute       = 4,
1588                .tuner_type     = TUNER_PHILIPS_NTSC,
1589                .tuner_addr     = ADDR_UNSET,
1590                .audio_mode_gpio= windvr_audio,
1591        },
1592        [BTTV_BOARD_GRANDTEC_MULTI] = {
1593                .name           = "GrandTec Multi Capture Card (Bt878)",
1594                .video_inputs   = 4,
1595                /* .audio_inputs= 0, */
1596                .svhs           = NO_SVHS,
1597                .gpiomask       = 0,
1598                .muxsel         = MUXSEL(2, 3, 1, 0),
1599                .gpiomux        = { 0 },
1600                .needs_tvaudio  = 0,
1601                .no_msp34xx     = 1,
1602                .pll            = PLL_28,
1603                .tuner_type     = TUNER_ABSENT,
1604                .tuner_addr     = ADDR_UNSET,
1605        },
1606        [BTTV_BOARD_KWORLD] = {
1607                .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1608                .video_inputs   = 4,
1609                /* .audio_inputs= 3, */
1610                .svhs           = 2,
1611                .gpiomask       = 7,
1612                /* Tuner, SVid, SVHS, SVid to SVHS connector */
1613                .muxsel         = MUXSEL(2, 3, 1, 1),
1614                .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1615                                                * This card lacks external Audio In, so we mute it on Ext. & Int.
1616                                                * The PCB can take a sbx1637/sbx1673, wiring unknown.
1617                                                * This card lacks PCI subsystem ID, sigh.
1618                                                * gpiomux =1: lower volume, 2+3: mute
1619                                                * btwincap uses 0x80000/0x80003
1620                                                */
1621                .gpiomute       = 4,
1622                .needs_tvaudio  = 0,
1623                .no_msp34xx     = 1,
1624                .pll            = PLL_28,
1625                .tuner_type     = TUNER_PHILIPS_PAL,
1626                .tuner_addr     = ADDR_UNSET,
1627                /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1628                radio signal strength indicators work fine. */
1629                .has_radio      = 1,
1630                /* GPIO Info:
1631                        GPIO0,1:   HEF4052 A0,A1
1632                        GPIO2:     HEF4052 nENABLE
1633                        GPIO3-7:   n.c.
1634                        GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1635                        GPIO14,15: ??
1636                        GPIO16-21: n.c.
1637                        GPIO22,23: ??
1638                        ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1639        },
1640        [BTTV_BOARD_DSP_TCVIDEO] = {
1641                /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1642                .name           = "DSP Design TCVIDEO",
1643                .video_inputs   = 4,
1644                .svhs           = NO_SVHS,
1645                .muxsel         = MUXSEL(2, 3, 1, 0),
1646                .pll            = PLL_28,
1647                .tuner_type     = UNSET,
1648                .tuner_addr     = ADDR_UNSET,
1649        },
1650
1651                /* ---- card 0x50 ---------------------------------- */
1652        [BTTV_BOARD_HAUPPAUGEPVR] = {
1653                .name           = "Hauppauge WinTV PVR",
1654                .video_inputs   = 4,
1655                /* .audio_inputs= 1, */
1656                .svhs           = 2,
1657                .muxsel         = MUXSEL(2, 0, 1, 1),
1658                .needs_tvaudio  = 1,
1659                .pll            = PLL_28,
1660                .tuner_type     = UNSET,
1661                .tuner_addr     = ADDR_UNSET,
1662
1663                .gpiomask       = 7,
1664                .gpiomux        = {7},
1665        },
1666        [BTTV_BOARD_GVBCTV5PCI] = {
1667                .name           = "IODATA GV-BCTV5/PCI",
1668                .video_inputs   = 3,
1669                /* .audio_inputs= 1, */
1670                .svhs           = 2,
1671                .gpiomask       = 0x0f0f80,
1672                .muxsel         = MUXSEL(2, 3, 1, 0),
1673                .gpiomux        = {0x030000, 0x010000, 0, 0 },
1674                .gpiomute       = 0x020000,
1675                .no_msp34xx     = 1,
1676                .pll            = PLL_28,
1677                .tuner_type     = TUNER_PHILIPS_NTSC_M,
1678                .tuner_addr     = ADDR_UNSET,
1679                .audio_mode_gpio= gvbctv5pci_audio,
1680                .has_radio      = 1,
1681        },
1682        [BTTV_BOARD_OSPREY1x0] = {
1683                .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1684                .video_inputs   = 4,                  /* id-inputs-clock */
1685                /* .audio_inputs= 0, */
1686                .svhs           = 3,
1687                .muxsel         = MUXSEL(3, 2, 0, 1),
1688                .pll            = PLL_28,
1689                .tuner_type     = TUNER_ABSENT,
1690                .tuner_addr     = ADDR_UNSET,
1691                .no_msp34xx     = 1,
1692                .no_tda7432     = 1,
1693        },
1694        [BTTV_BOARD_OSPREY1x0_848] = {
1695                .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1696                .video_inputs   = 3,
1697                /* .audio_inputs= 0, */
1698                .svhs           = 2,
1699                .muxsel         = MUXSEL(2, 3, 1),
1700                .pll            = PLL_28,
1701                .tuner_type     = TUNER_ABSENT,
1702                .tuner_addr     = ADDR_UNSET,
1703                .no_msp34xx     = 1,
1704                .no_tda7432     = 1,
1705        },
1706
1707                /* ---- card 0x54 ---------------------------------- */
1708        [BTTV_BOARD_OSPREY101_848] = {
1709                .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1710                .video_inputs   = 2,
1711                /* .audio_inputs= 0, */
1712                .svhs           = 1,
1713                .muxsel         = MUXSEL(3, 1),
1714                .pll            = PLL_28,
1715                .tuner_type     = TUNER_ABSENT,
1716                .tuner_addr     = ADDR_UNSET,
1717                .no_msp34xx     = 1,
1718                .no_tda7432     = 1,
1719        },
1720        [BTTV_BOARD_OSPREY1x1] = {
1721                .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1722                .video_inputs   = 1,
1723                /* .audio_inputs= 0, */
1724                .svhs           = NO_SVHS,
1725                .muxsel         = MUXSEL(0),
1726                .pll            = PLL_28,
1727                .tuner_type     = TUNER_ABSENT,
1728                .tuner_addr     = ADDR_UNSET,
1729                .no_msp34xx     = 1,
1730                .no_tda7432     = 1,
1731        },
1732        [BTTV_BOARD_OSPREY1x1_SVID] = {
1733                .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1734                .video_inputs   = 2,
1735                /* .audio_inputs= 0, */
1736                .svhs           = 1,
1737                .muxsel         = MUXSEL(0, 1),
1738                .pll            = PLL_28,
1739                .tuner_type     = TUNER_ABSENT,
1740                .tuner_addr     = ADDR_UNSET,
1741                .no_msp34xx     = 1,
1742                .no_tda7432     = 1,
1743        },
1744        [BTTV_BOARD_OSPREY2xx] = {
1745                .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1746                .video_inputs   = 1,
1747                /* .audio_inputs= 1, */
1748                .svhs           = NO_SVHS,
1749                .muxsel         = MUXSEL(0),
1750                .pll            = PLL_28,
1751                .tuner_type     = TUNER_ABSENT,
1752                .tuner_addr     = ADDR_UNSET,
1753                .no_msp34xx     = 1,
1754                .no_tda7432     = 1,
1755        },
1756
1757                /* ---- card 0x58 ---------------------------------- */
1758        [BTTV_BOARD_OSPREY2x0_SVID] = {
1759                .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1760                .video_inputs   = 2,
1761                /* .audio_inputs= 1, */
1762                .svhs           = 1,
1763                .muxsel         = MUXSEL(0, 1),
1764                .pll            = PLL_28,
1765                .tuner_type     = TUNER_ABSENT,
1766                .tuner_addr     = ADDR_UNSET,
1767                .no_msp34xx     = 1,
1768                .no_tda7432     = 1,
1769        },
1770        [BTTV_BOARD_OSPREY2x0] = {
1771                .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1772                .video_inputs   = 2,
1773                /* .audio_inputs= 1, */
1774                .svhs           = 1,
1775                .muxsel         = MUXSEL(2, 3),
1776                .pll            = PLL_28,
1777                .tuner_type     = TUNER_ABSENT,
1778                .tuner_addr     = ADDR_UNSET,
1779                .no_msp34xx     = 1,
1780                .no_tda7432     = 1,
1781        },
1782        [BTTV_BOARD_OSPREY500] = {
1783                .name           = "Osprey 500",   /* 500 */
1784                .video_inputs   = 2,
1785                /* .audio_inputs= 1, */
1786                .svhs           = 1,
1787                .muxsel         = MUXSEL(2, 3),
1788                .pll            = PLL_28,
1789                .tuner_type     = TUNER_ABSENT,
1790                .tuner_addr     = ADDR_UNSET,
1791                .no_msp34xx     = 1,
1792                .no_tda7432     = 1,
1793        },
1794        [BTTV_BOARD_OSPREY540] = {
1795                .name           = "Osprey 540",   /* 540 */
1796                .video_inputs   = 4,
1797                /* .audio_inputs= 1, */
1798                .pll            = PLL_28,
1799                .tuner_type     = TUNER_ABSENT,
1800                .tuner_addr     = ADDR_UNSET,
1801                .no_msp34xx     = 1,
1802                .no_tda7432     = 1,
1803        },
1804
1805                /* ---- card 0x5C ---------------------------------- */
1806        [BTTV_BOARD_OSPREY2000] = {
1807                .name           = "Osprey 2000",  /* 2000 */
1808                .video_inputs   = 2,
1809                /* .audio_inputs= 1, */
1810                .svhs           = 1,
1811                .muxsel         = MUXSEL(2, 3),
1812                .pll            = PLL_28,
1813                .tuner_type     = TUNER_ABSENT,
1814                .tuner_addr     = ADDR_UNSET,
1815                .no_msp34xx     = 1,
1816                .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1817        },
1818        [BTTV_BOARD_IDS_EAGLE] = {
1819                /* M G Berberich <berberic@forwiss.uni-passau.de> */
1820                .name           = "IDS Eagle",
1821                .video_inputs   = 4,
1822                /* .audio_inputs= 0, */
1823                .tuner_type     = TUNER_ABSENT,
1824                .tuner_addr     = ADDR_UNSET,
1825                .svhs           = NO_SVHS,
1826                .gpiomask       = 0,
1827                .muxsel         = MUXSEL(2, 2, 2, 2),
1828                .muxsel_hook    = eagle_muxsel,
1829                .no_msp34xx     = 1,
1830                .pll            = PLL_28,
1831        },
1832        [BTTV_BOARD_PINNACLESAT] = {
1833                .name           = "Pinnacle PCTV Sat",
1834                .video_inputs   = 2,
1835                /* .audio_inputs= 0, */
1836                .svhs           = 1,
1837                .tuner_type     = TUNER_ABSENT,
1838                .tuner_addr     = ADDR_UNSET,
1839                .no_msp34xx     = 1,
1840                .no_tda7432     = 1,
1841                .muxsel         = MUXSEL(3, 1),
1842                .pll            = PLL_28,
1843                .no_gpioirq     = 1,
1844                .has_dvb        = 1,
1845        },
1846        [BTTV_BOARD_FORMAC_PROTV] = {
1847                .name           = "Formac ProTV II (bt878)",
1848                .video_inputs   = 4,
1849                /* .audio_inputs= 1, */
1850                .svhs           = 3,
1851                .gpiomask       = 2,
1852                /* TV, Comp1, Composite over SVID con, SVID */
1853                .muxsel         = MUXSEL(2, 3, 1, 1),
1854                .gpiomux        = { 2, 2, 0, 0 },
1855                .pll            = PLL_28,
1856                .has_radio      = 1,
1857                .tuner_type     = TUNER_PHILIPS_PAL,
1858                .tuner_addr     = ADDR_UNSET,
1859        /* sound routing:
1860                GPIO=0x00,0x01,0x03: mute (?)
1861                0x02: both TV and radio (tuner: FM1216/I)
1862                The card has onboard audio connectors labeled "cdrom" and "board",
1863                not soldered here, though unknown wiring.
1864                Card lacks: external audio in, pci subsystem id.
1865        */
1866        },
1867
1868                /* ---- card 0x60 ---------------------------------- */
1869        [BTTV_BOARD_MACHTV] = {
1870                .name           = "MachTV",
1871                .video_inputs   = 3,
1872                /* .audio_inputs= 1, */
1873                .svhs           = NO_SVHS,
1874                .gpiomask       = 7,
1875                .muxsel         = MUXSEL(2, 3, 1, 1),
1876                .gpiomux        = { 0, 1, 2, 3},
1877                .gpiomute       = 4,
1878                .needs_tvaudio  = 1,
1879                .tuner_type     = TUNER_PHILIPS_PAL,
1880                .tuner_addr     = ADDR_UNSET,
1881                .pll            = PLL_28,
1882        },
1883        [BTTV_BOARD_EURESYS_PICOLO] = {
1884                .name           = "Euresys Picolo",
1885                .video_inputs   = 3,
1886                /* .audio_inputs= 0, */
1887                .svhs           = 2,
1888                .gpiomask       = 0,
1889                .no_msp34xx     = 1,
1890                .no_tda7432     = 1,
1891                .muxsel         = MUXSEL(2, 0, 1),
1892                .pll            = PLL_28,
1893                .tuner_type     = TUNER_ABSENT,
1894                .tuner_addr     = ADDR_UNSET,
1895        },
1896        [BTTV_BOARD_PV150] = {
1897                /* Luc Van Hoeylandt <luc@e-magic.be> */
1898                .name           = "ProVideo PV150", /* 0x4f */
1899                .video_inputs   = 2,
1900                /* .audio_inputs= 0, */
1901                .svhs           = NO_SVHS,
1902                .gpiomask       = 0,
1903                .muxsel         = MUXSEL(2, 3),
1904                .gpiomux        = { 0 },
1905                .needs_tvaudio  = 0,
1906                .no_msp34xx     = 1,
1907                .pll            = PLL_28,
1908                .tuner_type     = TUNER_ABSENT,
1909                .tuner_addr     = ADDR_UNSET,
1910        },
1911        [BTTV_BOARD_AD_TVK503] = {
1912                /* Hiroshi Takekawa <sian@big.or.jp> */
1913                /* This card lacks subsystem ID */
1914                .name           = "AD-TVK503", /* 0x63 */
1915                .video_inputs   = 4,
1916                /* .audio_inputs= 1, */
1917                .svhs           = 2,
1918                .gpiomask       = 0x001e8007,
1919                .muxsel         = MUXSEL(2, 3, 1, 0),
1920                /*                  Tuner, Radio, external, internal, off,  on */
1921                .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1922                .gpiomute       = 0x0f,
1923                .needs_tvaudio  = 0,
1924                .no_msp34xx     = 1,
1925                .pll            = PLL_28,
1926                .tuner_type     = TUNER_PHILIPS_NTSC,
1927                .tuner_addr     = ADDR_UNSET,
1928                .audio_mode_gpio= adtvk503_audio,
1929        },
1930
1931                /* ---- card 0x64 ---------------------------------- */
1932        [BTTV_BOARD_HERCULES_SM_TV] = {
1933                .name           = "Hercules Smart TV Stereo",
1934                .video_inputs   = 4,
1935                /* .audio_inputs= 1, */
1936                .svhs           = 2,
1937                .gpiomask       = 0x00,
1938                .muxsel         = MUXSEL(2, 3, 1, 1),
1939                .needs_tvaudio  = 1,
1940                .no_msp34xx     = 1,
1941                .pll            = PLL_28,
1942                .tuner_type     = TUNER_PHILIPS_PAL,
1943                .tuner_addr     = ADDR_UNSET,
1944                /* Notes:
1945                - card lacks subsystem ID
1946                - stereo variant w/ daughter board with tda9874a @0xb0
1947                - Audio Routing:
1948                        always from tda9874 independent of GPIO (?)
1949                        external line in: unknown
1950                - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1951                        hef4053 (instead 4052) for unknown function
1952                */
1953        },
1954        [BTTV_BOARD_PACETV] = {
1955                .name           = "Pace TV & Radio Card",
1956                .video_inputs   = 4,
1957                /* .audio_inputs= 1, */
1958                .svhs           = 2,
1959                /* Tuner, CVid, SVid, CVid over SVid connector */
1960                .muxsel         = MUXSEL(2, 3, 1, 1),
1961                .gpiomask       = 0,
1962                .no_tda7432     = 1,
1963                .tuner_type     = TUNER_PHILIPS_PAL_I,
1964                .tuner_addr     = ADDR_UNSET,
1965                .has_radio      = 1,
1966                .pll            = PLL_28,
1967                /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1968                only internal line out: (4pin header) RGGL
1969                Radio must be decoded by msp3410d (not routed through)*/
1970                /*
1971                .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1972                */
1973        },
1974        [BTTV_BOARD_IVC200] = {
1975                /* Chris Willing <chris@vislab.usyd.edu.au> */
1976                .name           = "IVC-200",
1977                .video_inputs   = 1,
1978                /* .audio_inputs= 0, */
1979                .tuner_type     = TUNER_ABSENT,
1980                .tuner_addr     = ADDR_UNSET,
1981                .svhs           = NO_SVHS,
1982                .gpiomask       = 0xdf,
1983                .muxsel         = MUXSEL(2),
1984                .pll            = PLL_28,
1985        },
1986        [BTTV_BOARD_IVCE8784] = {
1987                .name           = "IVCE-8784",
1988                .video_inputs   = 1,
1989                /* .audio_inputs= 0, */
1990                .tuner_type     = TUNER_ABSENT,
1991                .tuner_addr     = ADDR_UNSET,
1992                .svhs           = NO_SVHS,
1993                .gpiomask       = 0xdf,
1994                .muxsel         = MUXSEL(2),
1995                .pll            = PLL_28,
1996        },
1997        [BTTV_BOARD_XGUARD] = {
1998                .name           = "Grand X-Guard / Trust 814PCI",
1999                .video_inputs   = 16,
2000                /* .audio_inputs= 0, */
2001                .svhs           = NO_SVHS,
2002                .tuner_type     = TUNER_ABSENT,
2003                .tuner_addr     = ADDR_UNSET,
2004                .gpiomask2      = 0xff,
2005                .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2006                .muxsel_hook    = xguard_muxsel,
2007                .no_msp34xx     = 1,
2008                .no_tda7432     = 1,
2009                .pll            = PLL_28,
2010        },
2011
2012                /* ---- card 0x68 ---------------------------------- */
2013        [BTTV_BOARD_NEBULA_DIGITV] = {
2014                .name           = "Nebula Electronics DigiTV",
2015                .video_inputs   = 1,
2016                .svhs           = NO_SVHS,
2017                .muxsel         = MUXSEL(2, 3, 1, 0),
2018                .no_msp34xx     = 1,
2019                .no_tda7432     = 1,
2020                .pll            = PLL_28,
2021                .tuner_type     = TUNER_ABSENT,
2022                .tuner_addr     = ADDR_UNSET,
2023                .has_dvb        = 1,
2024                .has_remote     = 1,
2025                .gpiomask       = 0x1b,
2026                .no_gpioirq     = 1,
2027        },
2028        [BTTV_BOARD_PV143] = {
2029                /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2030                .name           = "ProVideo PV143",
2031                .video_inputs   = 4,
2032                /* .audio_inputs= 0, */
2033                .svhs           = NO_SVHS,
2034                .gpiomask       = 0,
2035                .muxsel         = MUXSEL(2, 3, 1, 0),
2036                .gpiomux        = { 0 },
2037                .needs_tvaudio  = 0,
2038                .no_msp34xx     = 1,
2039                .pll            = PLL_28,
2040                .tuner_type     = TUNER_ABSENT,
2041                .tuner_addr     = ADDR_UNSET,
2042        },
2043        [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2044                /* M.Klahr@phytec.de */
2045                .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2046                .video_inputs   = 4,
2047                /* .audio_inputs= 0, */
2048                .svhs           = 3,
2049                .gpiomask       = 0x00,
2050                .muxsel         = MUXSEL(2, 3, 1, 0),
2051                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2052                .needs_tvaudio  = 0,
2053                .pll            = PLL_28,
2054                .tuner_type     = TUNER_ABSENT,
2055                .tuner_addr     = ADDR_UNSET,
2056        },
2057        [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2058                .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2059                .video_inputs   = 4,
2060                /* .audio_inputs= 0, */
2061                .svhs           = 3,
2062                .gpiomask       = 0x00,
2063                .muxsel         = MUXSEL(2, 3, 1, 1),
2064                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2065                .needs_tvaudio  = 0,
2066                .pll            = PLL_28,
2067                .tuner_type     = TUNER_ABSENT,
2068                .tuner_addr     = ADDR_UNSET,
2069        },
2070
2071                /* ---- card 0x6c ---------------------------------- */
2072        [BTTV_BOARD_VD009_MINIDIN] = {
2073                .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2074                .video_inputs   = 10,
2075                /* .audio_inputs= 0, */
2076                .svhs           = 9,
2077                .gpiomask       = 0x00,
2078                .gpiomask2      = 0x03, /* used for external vodeo mux */
2079                .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2080                .muxsel_hook    = phytec_muxsel,
2081                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2082                .needs_tvaudio  = 1,
2083                .pll            = PLL_28,
2084                .tuner_type     = TUNER_ABSENT,
2085                .tuner_addr     = ADDR_UNSET,
2086        },
2087        [BTTV_BOARD_VD009_COMBI] = {
2088                .name           = "PHYTEC VD-009 Combi (bt878)",
2089                .video_inputs   = 10,
2090                /* .audio_inputs= 0, */
2091                .svhs           = 9,
2092                .gpiomask       = 0x00,
2093                .gpiomask2      = 0x03, /* used for external vodeo mux */
2094                .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2095                .muxsel_hook    = phytec_muxsel,
2096                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2097                .needs_tvaudio  = 1,
2098                .pll            = PLL_28,
2099                .tuner_type     = TUNER_ABSENT,
2100                .tuner_addr     = ADDR_UNSET,
2101        },
2102        [BTTV_BOARD_IVC100] = {
2103                .name           = "IVC-100",
2104                .video_inputs   = 4,
2105                /* .audio_inputs= 0, */
2106                .tuner_type     = TUNER_ABSENT,
2107                .tuner_addr     = ADDR_UNSET,
2108                .svhs           = NO_SVHS,
2109                .gpiomask       = 0xdf,
2110                .muxsel         = MUXSEL(2, 3, 1, 0),
2111                .pll            = PLL_28,
2112        },
2113        [BTTV_BOARD_IVC120] = {
2114                /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2115                .name           = "IVC-120G",
2116                .video_inputs   = 16,
2117                /* .audio_inputs= 0, */
2118                .tuner_type     = TUNER_ABSENT,
2119                .tuner_addr     = ADDR_UNSET,
2120                .svhs           = NO_SVHS,   /* card has no svhs */
2121                .needs_tvaudio  = 0,
2122                .no_msp34xx     = 1,
2123                .no_tda7432     = 1,
2124                .gpiomask       = 0x00,
2125                .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2126                .muxsel_hook    = ivc120_muxsel,
2127                .pll            = PLL_28,
2128        },
2129
2130                /* ---- card 0x70 ---------------------------------- */
2131        [BTTV_BOARD_PC_HDTV] = {
2132                .name           = "pcHDTV HD-2000 TV",
2133                .video_inputs   = 4,
2134                /* .audio_inputs= 1, */
2135                .svhs           = 2,
2136                .muxsel         = MUXSEL(2, 3, 1, 0),
2137                .tuner_type     = TUNER_PHILIPS_FCV1236D,
2138                .tuner_addr     = ADDR_UNSET,
2139                .has_dvb        = 1,
2140        },
2141        [BTTV_BOARD_TWINHAN_DST] = {
2142                .name           = "Twinhan DST + clones",
2143                .no_msp34xx     = 1,
2144                .no_tda7432     = 1,
2145                .tuner_type     = TUNER_ABSENT,
2146                .tuner_addr     = ADDR_UNSET,
2147                .no_video       = 1,
2148                .has_dvb        = 1,
2149        },
2150        [BTTV_BOARD_WINFASTVC100] = {
2151                .name           = "Winfast VC100",
2152                .video_inputs   = 3,
2153                /* .audio_inputs= 0, */
2154                .svhs           = 1,
2155                /* Vid In, SVid In, Vid over SVid in connector */
2156                .muxsel         = MUXSEL(3, 1, 1, 3),
2157                .no_msp34xx     = 1,
2158                .no_tda7432     = 1,
2159                .tuner_type     = TUNER_ABSENT,
2160                .tuner_addr     = ADDR_UNSET,
2161                .pll            = PLL_28,
2162        },
2163        [BTTV_BOARD_TEV560] = {
2164                .name           = "Teppro TEV-560/InterVision IV-560",
2165                .video_inputs   = 3,
2166                /* .audio_inputs= 1, */
2167                .svhs           = 2,
2168                .gpiomask       = 3,
2169                .muxsel         = MUXSEL(2, 3, 1, 1),
2170                .gpiomux        = { 1, 1, 1, 1 },
2171                .needs_tvaudio  = 1,
2172                .tuner_type     = TUNER_PHILIPS_PAL,
2173                .tuner_addr     = ADDR_UNSET,
2174                .pll            = PLL_35,
2175        },
2176
2177                /* ---- card 0x74 ---------------------------------- */
2178        [BTTV_BOARD_SIMUS_GVC1100] = {
2179                .name           = "SIMUS GVC1100",
2180                .video_inputs   = 4,
2181                /* .audio_inputs= 0, */
2182                .svhs           = NO_SVHS,
2183                .tuner_type     = TUNER_ABSENT,
2184                .tuner_addr     = ADDR_UNSET,
2185                .pll            = PLL_28,
2186                .muxsel         = MUXSEL(2, 2, 2, 2),
2187                .gpiomask       = 0x3F,
2188                .muxsel_hook    = gvc1100_muxsel,
2189        },
2190        [BTTV_BOARD_NGSTV_PLUS] = {
2191                /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2192                .name           = "NGS NGSTV+",
2193                .video_inputs   = 3,
2194                .svhs           = 2,
2195                .gpiomask       = 0x008007,
2196                .muxsel         = MUXSEL(2, 3, 0, 0),
2197                .gpiomux        = { 0, 0, 0, 0 },
2198                .gpiomute       = 0x000003,
2199                .pll            = PLL_28,
2200                .tuner_type     = TUNER_PHILIPS_PAL,
2201                .tuner_addr     = ADDR_UNSET,
2202                .has_remote     = 1,
2203        },
2204        [BTTV_BOARD_LMLBT4] = {
2205                /* http://linuxmedialabs.com */
2206                .name           = "LMLBT4",
2207                .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2208                /* .audio_inputs= 0, */
2209                .svhs           = NO_SVHS,
2210                .muxsel         = MUXSEL(2, 3, 1, 0),
2211                .no_msp34xx     = 1,
2212                .no_tda7432     = 1,
2213                .needs_tvaudio  = 0,
2214                .tuner_type     = TUNER_ABSENT,
2215                .tuner_addr     = ADDR_UNSET,
2216        },
2217        [BTTV_BOARD_TEKRAM_M205] = {
2218                /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2219                .name           = "Tekram M205 PRO",
2220                .video_inputs   = 3,
2221                /* .audio_inputs= 1, */
2222                .tuner_type     = TUNER_PHILIPS_PAL,
2223                .tuner_addr     = ADDR_UNSET,
2224                .svhs           = 2,
2225                .needs_tvaudio  = 0,
2226                .gpiomask       = 0x68,
2227                .muxsel         = MUXSEL(2, 3, 1),
2228                .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2229                .pll            = PLL_28,
2230        },
2231
2232                /* ---- card 0x78 ---------------------------------- */
2233        [BTTV_BOARD_CONTVFMI] = {
2234                /* Javier Cendan Ares <jcendan@lycos.es> */
2235                /* bt878 TV + FM without subsystem ID */
2236                .name           = "Conceptronic CONTVFMi",
2237                .video_inputs   = 3,
2238                /* .audio_inputs= 1, */
2239                .svhs           = 2,
2240                .gpiomask       = 0x008007,
2241                .muxsel         = MUXSEL(2, 3, 1, 1),
2242                .gpiomux        = { 0, 1, 2, 2 },
2243                .gpiomute       = 3,
2244                .needs_tvaudio  = 0,
2245                .pll            = PLL_28,
2246                .tuner_type     = TUNER_PHILIPS_PAL,
2247                .tuner_addr     = ADDR_UNSET,
2248                .has_remote     = 1,
2249                .has_radio      = 1,
2250        },
2251        [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2252                /*Eric DEBIEF <debief@telemsa.com>*/
2253                /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2254                /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2255                /*0x79 in bttv.h*/
2256                .name           = "Euresys Picolo Tetra",
2257                .video_inputs   = 4,
2258                /* .audio_inputs= 0, */
2259                .svhs           = NO_SVHS,
2260                .gpiomask       = 0,
2261                .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2262                .no_msp34xx     = 1,
2263                .no_tda7432     = 1,
2264                /*878A input is always MUX0, see above.*/
2265                .muxsel         = MUXSEL(2, 2, 2, 2),
2266                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2267                .pll            = PLL_28,
2268                .needs_tvaudio  = 0,
2269                .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2270                .tuner_type     = TUNER_ABSENT,
2271                .tuner_addr     = ADDR_UNSET,
2272        },
2273        [BTTV_BOARD_SPIRIT_TV] = {
2274                /* Spirit TV Tuner from http://spiritmodems.com.au */
2275                /* Stafford Goodsell <surge@goliath.homeunix.org> */
2276                .name           = "Spirit TV Tuner",
2277                .video_inputs   = 3,
2278                /* .audio_inputs= 1, */
2279                .svhs           = 2,
2280                .gpiomask       = 0x0000000f,
2281                .muxsel         = MUXSEL(2, 1, 1),
2282                .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2283                .tuner_type     = TUNER_TEMIC_PAL,
2284                .tuner_addr     = ADDR_UNSET,
2285                .no_msp34xx     = 1,
2286        },
2287        [BTTV_BOARD_AVDVBT_771] = {
2288                /* Wolfram Joost <wojo@frokaschwei.de> */
2289                .name           = "AVerMedia AVerTV DVB-T 771",
2290                .video_inputs   = 2,
2291                .svhs           = 1,
2292                .tuner_type     = TUNER_ABSENT,
2293                .tuner_addr     = ADDR_UNSET,
2294                .muxsel         = MUXSEL(3, 3),
2295                .no_msp34xx     = 1,
2296                .no_tda7432     = 1,
2297                .pll            = PLL_28,
2298                .has_dvb        = 1,
2299                .no_gpioirq     = 1,
2300                .has_remote     = 1,
2301        },
2302                /* ---- card 0x7c ---------------------------------- */
2303        [BTTV_BOARD_AVDVBT_761] = {
2304                /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2305                /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2306                .name           = "AverMedia AverTV DVB-T 761",
2307                .video_inputs   = 2,
2308                .svhs           = 1,
2309                .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2310                .no_msp34xx     = 1,
2311                .no_tda7432     = 1,
2312                .pll            = PLL_28,
2313                .tuner_type     = TUNER_ABSENT,
2314                .tuner_addr     = ADDR_UNSET,
2315                .has_dvb        = 1,
2316                .no_gpioirq     = 1,
2317                .has_remote     = 1,
2318        },
2319        [BTTV_BOARD_MATRIX_VISIONSQ] = {
2320                /* andre.schwarz@matrix-vision.de */
2321                .name           = "MATRIX Vision Sigma-SQ",
2322                .video_inputs   = 16,
2323                /* .audio_inputs= 0, */
2324                .svhs           = NO_SVHS,
2325                .gpiomask       = 0x0,
2326                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2327                .muxsel_hook    = sigmaSQ_muxsel,
2328                .gpiomux        = { 0 },
2329                .no_msp34xx     = 1,
2330                .pll            = PLL_28,
2331                .tuner_type     = TUNER_ABSENT,
2332                .tuner_addr     = ADDR_UNSET,
2333        },
2334        [BTTV_BOARD_MATRIX_VISIONSLC] = {
2335                /* andre.schwarz@matrix-vision.de */
2336                .name           = "MATRIX Vision Sigma-SLC",
2337                .video_inputs   = 4,
2338                /* .audio_inputs= 0, */
2339                .svhs           = NO_SVHS,
2340                .gpiomask       = 0x0,
2341                .muxsel         = MUXSEL(2, 2, 2, 2),
2342                .muxsel_hook    = sigmaSLC_muxsel,
2343                .gpiomux        = { 0 },
2344                .no_msp34xx     = 1,
2345                .pll            = PLL_28,
2346                .tuner_type     = TUNER_ABSENT,
2347                .tuner_addr     = ADDR_UNSET,
2348        },
2349                /* BTTV_BOARD_APAC_VIEWCOMP */
2350        [BTTV_BOARD_APAC_VIEWCOMP] = {
2351                /* Attila Kondoros <attila.kondoros@chello.hu> */
2352                /* bt878 TV + FM 0x00000000 subsystem ID */
2353                .name           = "APAC Viewcomp 878(AMAX)",
2354                .video_inputs   = 2,
2355                /* .audio_inputs= 1, */
2356                .svhs           = NO_SVHS,
2357                .gpiomask       = 0xFF,
2358                .muxsel         = MUXSEL(2, 3, 1, 1),
2359                .gpiomux        = { 2, 0, 0, 0 },
2360                .gpiomute       = 10,
2361                .needs_tvaudio  = 0,
2362                .pll            = PLL_28,
2363                .tuner_type     = TUNER_PHILIPS_PAL,
2364                .tuner_addr     = ADDR_UNSET,
2365                .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2366                .has_radio      = 1,   /* not every card has radio */
2367        },
2368
2369                /* ---- card 0x80 ---------------------------------- */
2370        [BTTV_BOARD_DVICO_DVBT_LITE] = {
2371                /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2372                .name           = "DViCO FusionHDTV DVB-T Lite",
2373                .no_msp34xx     = 1,
2374                .no_tda7432     = 1,
2375                .pll            = PLL_28,
2376                .no_video       = 1,
2377                .has_dvb        = 1,
2378                .tuner_type     = TUNER_ABSENT,
2379                .tuner_addr     = ADDR_UNSET,
2380        },
2381        [BTTV_BOARD_VGEAR_MYVCD] = {
2382                /* Steven <photon38@pchome.com.tw> */
2383                .name           = "V-Gear MyVCD",
2384                .video_inputs   = 3,
2385                /* .audio_inputs= 1, */
2386                .svhs           = 2,
2387                .gpiomask       = 0x3f,
2388                .muxsel         = MUXSEL(2, 3, 1, 0),
2389                .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2390                .gpiomute       = 0x31,
2391                .no_msp34xx     = 1,
2392                .pll            = PLL_28,
2393                .tuner_type     = TUNER_PHILIPS_NTSC_M,
2394                .tuner_addr     = ADDR_UNSET,
2395                .has_radio      = 0,
2396        },
2397        [BTTV_BOARD_SUPER_TV] = {
2398                /* Rick C <cryptdragoon@gmail.com> */
2399                .name           = "Super TV Tuner",
2400                .video_inputs   = 4,
2401                /* .audio_inputs= 1, */
2402                .svhs           = 2,
2403                .muxsel         = MUXSEL(2, 3, 1, 0),
2404                .tuner_type     = TUNER_PHILIPS_NTSC,
2405                .tuner_addr     = ADDR_UNSET,
2406                .gpiomask       = 0x008007,
2407                .gpiomux        = { 0, 0x000001,0,0 },
2408                .needs_tvaudio  = 1,
2409                .has_radio      = 1,
2410        },
2411        [BTTV_BOARD_TIBET_CS16] = {
2412                /* Chris Fanning <video4linux@haydon.net> */
2413                .name           = "Tibet Systems 'Progress DVR' CS16",
2414                .video_inputs   = 16,
2415                /* .audio_inputs= 0, */
2416                .svhs           = NO_SVHS,
2417                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2418                .pll            = PLL_28,
2419                .no_msp34xx     = 1,
2420                .no_tda7432     = 1,
2421                .tuner_type     = TUNER_ABSENT,
2422                .tuner_addr     = ADDR_UNSET,
2423                .muxsel_hook    = tibetCS16_muxsel,
2424        },
2425        [BTTV_BOARD_KODICOM_4400R] = {
2426                /* Bill Brack <wbrack@mmm.com.hk> */
2427                /*
2428                * Note that, because of the card's wiring, the "master"
2429                * BT878A chip (i.e. the one which controls the analog switch
2430                * and must use this card type) is the 2nd one detected.  The
2431                * other 3 chips should use card type 0x85, whose description
2432                * follows this one.  There is a EEPROM on the card (which is
2433                * connected to the I2C of one of those other chips), but is
2434                * not currently handled.  There is also a facility for a
2435                * "monitor", which is also not currently implemented.
2436                */
2437                .name           = "Kodicom 4400R (master)",
2438                .video_inputs   = 16,
2439                /* .audio_inputs= 0, */
2440                .tuner_type     = TUNER_ABSENT,
2441                .tuner_addr     = ADDR_UNSET,
2442                .svhs           = NO_SVHS,
2443                /* GPIO bits 0-9 used for analog switch:
2444                *   00 - 03:    camera selector
2445                *   04 - 06:    channel (controller) selector
2446                *   07: data (1->on, 0->off)
2447                *   08: strobe
2448                *   09: reset
2449                * bit 16 is input from sync separator for the channel
2450                */
2451                .gpiomask       = 0x0003ff,
2452                .no_gpioirq     = 1,
2453                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2454                .pll            = PLL_28,
2455                .no_msp34xx     = 1,
2456                .no_tda7432     = 1,
2457                .muxsel_hook    = kodicom4400r_muxsel,
2458        },
2459        [BTTV_BOARD_KODICOM_4400R_SL] = {
2460                /* Bill Brack <wbrack@mmm.com.hk> */
2461                /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2462                * one which controls the analog switch, and must use the card type)
2463                * is the 2nd one detected.  The other 3 chips should use this card
2464                * type
2465                */
2466                .name           = "Kodicom 4400R (slave)",
2467                .video_inputs   = 16,
2468                /* .audio_inputs= 0, */
2469                .tuner_type     = TUNER_ABSENT,
2470                .tuner_addr     = ADDR_UNSET,
2471                .svhs           = NO_SVHS,
2472                .gpiomask       = 0x010000,
2473                .no_gpioirq     = 1,
2474                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2475                .pll            = PLL_28,
2476                .no_msp34xx     = 1,
2477                .no_tda7432     = 1,
2478                .muxsel_hook    = kodicom4400r_muxsel,
2479        },
2480                /* ---- card 0x86---------------------------------- */
2481        [BTTV_BOARD_ADLINK_RTV24] = {
2482                /* Michael Henson <mhenson@clarityvi.com> */
2483                /* Adlink RTV24 with special unlock codes */
2484                .name           = "Adlink RTV24",
2485                .video_inputs   = 4,
2486                /* .audio_inputs= 1, */
2487                .svhs           = 2,
2488                .muxsel         = MUXSEL(2, 3, 1, 0),
2489                .tuner_type     = UNSET,
2490                .tuner_addr     = ADDR_UNSET,
2491                .pll            = PLL_28,
2492        },
2493                /* ---- card 0x87---------------------------------- */
2494        [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2495                /* Michael Krufky <mkrufky@m1k.net> */
2496                .name           = "DViCO FusionHDTV 5 Lite",
2497                .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2498                .tuner_addr     = ADDR_UNSET,
2499                .video_inputs   = 3,
2500                /* .audio_inputs= 1, */
2501                .svhs           = 2,
2502                .muxsel         = MUXSEL(2, 3, 1),
2503                .gpiomask       = 0x00e00007,
2504                .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2505                .gpiomute       = 0x00c00007,
2506                .no_msp34xx     = 1,
2507                .no_tda7432     = 1,
2508                .has_dvb        = 1,
2509        },
2510                /* ---- card 0x88---------------------------------- */
2511        [BTTV_BOARD_ACORP_Y878F] = {
2512                /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2513                .name           = "Acorp Y878F",
2514                .video_inputs   = 3,
2515                /* .audio_inputs= 1, */
2516                .svhs           = 2,
2517                .gpiomask       = 0x01fe00,
2518                .muxsel         = MUXSEL(2, 3, 1, 1),
2519                .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2520                .gpiomute       = 0x002000,
2521                .needs_tvaudio  = 1,
2522                .pll            = PLL_28,
2523                .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2524                .tuner_addr     = 0xc1 >>1,
2525                .has_radio      = 1,
2526        },
2527                /* ---- card 0x89 ---------------------------------- */
2528        [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2529                .name           = "Conceptronic CTVFMi v2",
2530                .video_inputs   = 3,
2531                /* .audio_inputs= 1, */
2532                .svhs           = 2,
2533                .gpiomask       = 0x001c0007,
2534                .muxsel         = MUXSEL(2, 3, 1, 1),
2535                .gpiomux        = { 0, 1, 2, 2 },
2536                .gpiomute       = 3,
2537                .needs_tvaudio  = 0,
2538                .pll            = PLL_28,
2539                .tuner_type     = TUNER_TENA_9533_DI,
2540                .tuner_addr     = ADDR_UNSET,
2541                .has_remote     = 1,
2542                .has_radio      = 1,
2543        },
2544                /* ---- card 0x8a ---------------------------------- */
2545        [BTTV_BOARD_PV_BT878P_2E] = {
2546                .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2547                .video_inputs   = 5,
2548                /* .audio_inputs= 1, */
2549                .svhs           = 3,
2550                .has_dig_in     = 1,
2551                .gpiomask       = 0x01fe00,
2552                .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2553                /* .digital_mode= DIGITAL_MODE_CAMERA, */
2554                .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2555                .gpiomute       = 0x12400,
2556                .no_msp34xx     = 1,
2557                .pll            = PLL_28,
2558                .tuner_type     = TUNER_LG_PAL_FM,
2559                .tuner_addr     = ADDR_UNSET,
2560                .has_remote     = 1,
2561        },
2562                /* ---- card 0x8b ---------------------------------- */
2563        [BTTV_BOARD_PV_M4900] = {
2564                /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2565                .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2566                .video_inputs   = 3,
2567                /* .audio_inputs= 1, */
2568                .svhs           = 2,
2569                .gpiomask       = 0x3f,
2570                .muxsel         = MUXSEL(2, 3, 1, 1),
2571                .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2572                .gpiomute       = 0x29,
2573                .no_msp34xx     = 1,
2574                .pll            = PLL_28,
2575                .tuner_type     = TUNER_YMEC_TVF_5533MF,
2576                .tuner_addr     = ADDR_UNSET,
2577                .has_radio      = 1,
2578                .has_remote     = 1,
2579        },
2580                /* ---- card 0x8c ---------------------------------- */
2581        /* Has four Bt878 chips behind a PCI bridge, each chip has:
2582             one external BNC composite input (mux 2)
2583             three internal composite inputs (unknown muxes)
2584             an 18-bit stereo A/D (CS5331A), which has:
2585               one external stereo unblanced (RCA) audio connection
2586               one (or 3?) internal stereo balanced (XLR) audio connection
2587               input is selected via gpio to a 14052B mux
2588                 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2589               gain is controlled via an X9221A chip on the I2C bus @0x28
2590               sample rate is controlled via gpio to an MK1413S
2591                 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2592             There is neither a tuner nor an svideo input. */
2593        [BTTV_BOARD_OSPREY440]  = {
2594                .name           = "Osprey 440",
2595                .video_inputs   = 4,
2596                /* .audio_inputs= 2, */
2597                .svhs           = NO_SVHS,
2598                .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2599                .gpiomask       = 0x303,
2600                .gpiomute       = 0x000, /* int + 32kHz */
2601                .gpiomux        = { 0, 0, 0x000, 0x100},
2602                .pll            = PLL_28,
2603                .tuner_type     = TUNER_ABSENT,
2604                .tuner_addr     = ADDR_UNSET,
2605                .no_msp34xx     = 1,
2606                .no_tda7432     = 1,
2607        },
2608                /* ---- card 0x8d ---------------------------------- */
2609        [BTTV_BOARD_ASOUND_SKYEYE] = {
2610                .name           = "Asound Skyeye PCTV",
2611                .video_inputs   = 3,
2612                /* .audio_inputs= 1, */
2613                .svhs           = 2,
2614                .gpiomask       = 15,
2615                .muxsel         = MUXSEL(2, 3, 1, 1),
2616                .gpiomux        = { 2, 0, 0, 0 },
2617                .gpiomute       = 1,
2618                .needs_tvaudio  = 1,
2619                .pll            = PLL_28,
2620                .tuner_type     = TUNER_PHILIPS_NTSC,
2621                .tuner_addr     = ADDR_UNSET,
2622        },
2623                /* ---- card 0x8e ---------------------------------- */
2624        [BTTV_BOARD_SABRENT_TVFM] = {
2625                .name           = "Sabrent TV-FM (bttv version)",
2626                .video_inputs   = 3,
2627                /* .audio_inputs= 1, */
2628                .svhs           = 2,
2629                .gpiomask       = 0x108007,
2630                .muxsel         = MUXSEL(2, 3, 1, 1),
2631                .gpiomux        = { 100000, 100002, 100002, 100000 },
2632                .no_msp34xx     = 1,
2633                .no_tda7432     = 1,
2634                .pll            = PLL_28,
2635                .tuner_type     = TUNER_TNF_5335MF,
2636                .tuner_addr     = ADDR_UNSET,
2637                .has_radio      = 1,
2638        },
2639        /* ---- card 0x8f ---------------------------------- */
2640        [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2641                .name           = "Hauppauge ImpactVCB (bt878)",
2642                .video_inputs   = 4,
2643                /* .audio_inputs= 0, */
2644                .svhs           = NO_SVHS,
2645                .gpiomask       = 0x0f, /* old: 7 */
2646                .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2647                .no_msp34xx     = 1,
2648                .no_tda7432     = 1,
2649                .tuner_type     = TUNER_ABSENT,
2650                .tuner_addr     = ADDR_UNSET,
2651        },
2652        [BTTV_BOARD_MACHTV_MAGICTV] = {
2653                /* Julian Calaby <julian.calaby@gmail.com>
2654                 * Slightly different from original MachTV definition (0x60)
2655
2656                 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2657                 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2658                 * properly (methinks) causing no keyup bits being set */
2659
2660                .name           = "MagicTV", /* rebranded MachTV */
2661                .video_inputs   = 3,
2662                /* .audio_inputs= 1, */
2663                .svhs           = 2,
2664                .gpiomask       = 7,
2665                .muxsel         = MUXSEL(2, 3, 1, 1),
2666                .gpiomux        = { 0, 1, 2, 3 },
2667                .gpiomute       = 4,
2668                .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2669                .tuner_addr     = ADDR_UNSET,
2670                .pll            = PLL_28,
2671                .has_radio      = 1,
2672                .has_remote     = 1,
2673        },
2674        [BTTV_BOARD_SSAI_SECURITY] = {
2675                .name           = "SSAI Security Video Interface",
2676                .video_inputs   = 4,
2677                /* .audio_inputs= 0, */
2678                .svhs           = NO_SVHS,
2679                .muxsel         = MUXSEL(0, 1, 2, 3),
2680                .tuner_type     = TUNER_ABSENT,
2681                .tuner_addr     = ADDR_UNSET,
2682        },
2683        [BTTV_BOARD_SSAI_ULTRASOUND] = {
2684                .name           = "SSAI Ultrasound Video Interface",
2685                .video_inputs   = 2,
2686                /* .audio_inputs= 0, */
2687                .svhs           = 1,
2688                .muxsel         = MUXSEL(2, 0, 1, 3),
2689                .tuner_type     = TUNER_ABSENT,
2690                .tuner_addr     = ADDR_UNSET,
2691        },
2692        /* ---- card 0x94---------------------------------- */
2693        [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2694                .name           = "DViCO FusionHDTV 2",
2695                .tuner_type     = TUNER_PHILIPS_FCV1236D,
2696                .tuner_addr     = ADDR_UNSET,
2697                .video_inputs   = 3,
2698                /* .audio_inputs= 1, */
2699                .svhs           = 2,
2700                .muxsel         = MUXSEL(2, 3, 1),
2701                .gpiomask       = 0x00e00007,
2702                .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2703                .gpiomute       = 0x00c00007,
2704                .no_msp34xx     = 1,
2705                .no_tda7432     = 1,
2706        },
2707        /* ---- card 0x95---------------------------------- */
2708        [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2709                .name           = "Typhoon TV-Tuner PCI (50684)",
2710                .video_inputs   = 3,
2711                /* .audio_inputs= 1, */
2712                .svhs           = 2,
2713                .gpiomask       = 0x3014f,
2714                .muxsel         = MUXSEL(2, 3, 1, 1),
2715                .gpiomux        = { 0x20001,0x10001, 0, 0 },
2716                .gpiomute       = 10,
2717                .needs_tvaudio  = 1,
2718                .pll            = PLL_28,
2719                .tuner_type     = TUNER_PHILIPS_PAL_I,
2720                .tuner_addr     = ADDR_UNSET,
2721        },
2722        [BTTV_BOARD_GEOVISION_GV600] = {
2723                /* emhn@usb.ve */
2724                .name           = "Geovision GV-600",
2725                .video_inputs   = 16,
2726                /* .audio_inputs= 0, */
2727                .svhs           = NO_SVHS,
2728                .gpiomask       = 0x0,
2729                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2730                .muxsel_hook    = geovision_muxsel,
2731                .gpiomux        = { 0 },
2732                .no_msp34xx     = 1,
2733                .pll            = PLL_28,
2734                .tuner_type     = TUNER_ABSENT,
2735                .tuner_addr     = ADDR_UNSET,
2736        },
2737        [BTTV_BOARD_KOZUMI_KTV_01C] = {
2738                /* Mauro Lacy <mauro@lacy.com.ar>
2739                 * Based on MagicTV and Conceptronic CONTVFMi */
2740
2741                .name           = "Kozumi KTV-01C",
2742                .video_inputs   = 3,
2743                /* .audio_inputs= 1, */
2744                .svhs           = 2,
2745                .gpiomask       = 0x008007,
2746                .muxsel         = MUXSEL(2, 3, 1, 1),
2747                .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2748                .gpiomute       = 3, /* CONTVFMi */
2749                .needs_tvaudio  = 0,
2750                .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2751                .tuner_addr     = ADDR_UNSET,
2752                .pll            = PLL_28,
2753                .has_radio      = 1,
2754                .has_remote     = 1,
2755        },
2756        [BTTV_BOARD_ENLTV_FM_2] = {
2757                /* Encore TV Tuner Pro ENL TV-FM-2
2758                   Mauro Carvalho Chehab <mchehab@infradead.org */
2759                .name           = "Encore ENL TV-FM-2",
2760                .video_inputs   = 3,
2761                /* .audio_inputs= 1, */
2762                .svhs           = 2,
2763                /* bit 6          -> IR disabled
2764                   bit 18/17 = 00 -> mute
2765                               01 -> enable external audio input
2766                               10 -> internal audio input (mono?)
2767                               11 -> internal audio input
2768                 */
2769                .gpiomask       = 0x060040,
2770                .muxsel         = MUXSEL(2, 3, 3),
2771                .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2772                .gpiomute       = 0,
2773                .tuner_type     = TUNER_TCL_MF02GIP_5N,
2774                .tuner_addr     = ADDR_UNSET,
2775                .pll            = PLL_28,
2776                .has_radio      = 1,
2777                .has_remote     = 1,
2778        },
2779                [BTTV_BOARD_VD012] = {
2780                /* D.Heer@Phytec.de */
2781                .name           = "PHYTEC VD-012 (bt878)",
2782                .video_inputs   = 4,
2783                /* .audio_inputs= 0, */
2784                .svhs           = NO_SVHS,
2785                .gpiomask       = 0x00,
2786                .muxsel         = MUXSEL(0, 2, 3, 1),
2787                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2788                .needs_tvaudio  = 0,
2789                .pll            = PLL_28,
2790                .tuner_type     = TUNER_ABSENT,
2791                .tuner_addr     = ADDR_UNSET,
2792        },
2793                [BTTV_BOARD_VD012_X1] = {
2794                /* D.Heer@Phytec.de */
2795                .name           = "PHYTEC VD-012-X1 (bt878)",
2796                .video_inputs   = 4,
2797                /* .audio_inputs= 0, */
2798                .svhs           = 3,
2799                .gpiomask       = 0x00,
2800                .muxsel         = MUXSEL(2, 3, 1),
2801                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2802                .needs_tvaudio  = 0,
2803                .pll            = PLL_28,
2804                .tuner_type     = TUNER_ABSENT,
2805                .tuner_addr     = ADDR_UNSET,
2806        },
2807                [BTTV_BOARD_VD012_X2] = {
2808                /* D.Heer@Phytec.de */
2809                .name           = "PHYTEC VD-012-X2 (bt878)",
2810                .video_inputs   = 4,
2811                /* .audio_inputs= 0, */
2812                .svhs           = 3,
2813                .gpiomask       = 0x00,
2814                .muxsel         = MUXSEL(3, 2, 1),
2815                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2816                .needs_tvaudio  = 0,
2817                .pll            = PLL_28,
2818                .tuner_type     = TUNER_ABSENT,
2819                .tuner_addr     = ADDR_UNSET,
2820        },
2821                [BTTV_BOARD_GEOVISION_GV800S] = {
2822                /* Bruno Christo <bchristo@inf.ufsm.br>
2823                 *
2824                 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2825                 *      1 audio input  per BT878A = 4 audio inputs
2826                 *      4 video inputs per BT878A = 16 video inputs
2827                 * This is the first BT878A chip of the GV-800(S). It's the
2828                 * "master" chip and it controls the video inputs through an
2829                 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2830                 * slaves should use card type 0x9e (following this one).
2831                 * There is a EEPROM on the card which is currently not handled.
2832                 * The audio input is not working yet.
2833                 */
2834                .name           = "Geovision GV-800(S) (master)",
2835                .video_inputs   = 4,
2836                /* .audio_inputs= 1, */
2837                .tuner_type     = TUNER_ABSENT,
2838                .tuner_addr     = ADDR_UNSET,
2839                .svhs           = NO_SVHS,
2840                .gpiomask       = 0xf107f,
2841                .no_gpioirq     = 1,
2842                .muxsel         = MUXSEL(2, 2, 2, 2),
2843                .pll            = PLL_28,
2844                .no_msp34xx     = 1,
2845                .no_tda7432     = 1,
2846                .muxsel_hook    = gv800s_muxsel,
2847        },
2848                [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2849                /* Bruno Christo <bchristo@inf.ufsm.br>
2850                 *
2851                 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2852                 *      1 audio input  per BT878A = 4 audio inputs
2853                 *      4 video inputs per BT878A = 16 video inputs
2854                 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2855                 * and should use this card type.
2856                 * The audio input is not working yet.
2857                 */
2858                .name           = "Geovision GV-800(S) (slave)",
2859                .video_inputs   = 4,
2860                /* .audio_inputs= 1, */
2861                .tuner_type     = TUNER_ABSENT,
2862                .tuner_addr     = ADDR_UNSET,
2863                .svhs           = NO_SVHS,
2864                .gpiomask       = 0x00,
2865                .no_gpioirq     = 1,
2866                .muxsel         = MUXSEL(2, 2, 2, 2),
2867                .pll            = PLL_28,
2868                .no_msp34xx     = 1,
2869                .no_tda7432     = 1,
2870                .muxsel_hook    = gv800s_muxsel,
2871        },
2872        [BTTV_BOARD_PV183] = {
2873                .name           = "ProVideo PV183", /* 0x9f */
2874                .video_inputs   = 2,
2875                /* .audio_inputs= 0, */
2876                .svhs           = NO_SVHS,
2877                .gpiomask       = 0,
2878                .muxsel         = MUXSEL(2, 3),
2879                .gpiomux        = { 0 },
2880                .needs_tvaudio  = 0,
2881                .no_msp34xx     = 1,
2882                .pll            = PLL_28,
2883                .tuner_type     = TUNER_ABSENT,
2884                .tuner_addr     = ADDR_UNSET,
2885        },
2886        [BTTV_BOARD_TVT_TD3116] = {
2887                .name           = "Tongwei Video Technology TD-3116",
2888                .video_inputs   = 16,
2889                .gpiomask       = 0xc00ff,
2890                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2891                .muxsel_hook    = td3116_muxsel,
2892                .svhs           = NO_SVHS,
2893                .pll            = PLL_28,
2894                .tuner_type     = TUNER_ABSENT,
2895        },
2896};
2897
2898static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2899
2900/* ----------------------------------------------------------------------- */
2901
2902static unsigned char eeprom_data[256];
2903
2904/*
2905 * identify card
2906 */
2907void __devinit bttv_idcard(struct bttv *btv)
2908{
2909        unsigned int gpiobits;
2910        int i,type;
2911
2912        /* read PCI subsystem ID */
2913        btv->cardid  = btv->c.pci->subsystem_device << 16;
2914        btv->cardid |= btv->c.pci->subsystem_vendor;
2915
2916        if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2917                /* look for the card */
2918                for (type = -1, i = 0; cards[i].id != 0; i++)
2919                        if (cards[i].id  == btv->cardid)
2920                                type = i;
2921
2922                if (type != -1) {
2923                        /* found it */
2924                        pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2925                                btv->c.nr, cards[type].name, cards[type].cardnr,
2926                                btv->cardid & 0xffff,
2927                                (btv->cardid >> 16) & 0xffff);
2928                        btv->c.type = cards[type].cardnr;
2929                } else {
2930                        /* 404 */
2931                        pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2932                                btv->c.nr, btv->cardid & 0xffff,
2933                                (btv->cardid >> 16) & 0xffff);
2934                        pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2935                }
2936        }
2937
2938        /* let the user override the autodetected type */
2939        if (card[btv->c.nr] < bttv_num_tvcards)
2940                btv->c.type=card[btv->c.nr];
2941
2942        /* print which card config we are using */
2943        pr_info("%d: using: %s [card=%d,%s]\n",
2944                btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2945                card[btv->c.nr] < bttv_num_tvcards
2946                ? "insmod option" : "autodetected");
2947
2948        /* overwrite gpio stuff ?? */
2949        if (UNSET == audioall && UNSET == audiomux[0])
2950                return;
2951
2952        if (UNSET != audiomux[0]) {
2953                gpiobits = 0;
2954                for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2955                        bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2956                        gpiobits |= audiomux[i];
2957                }
2958        } else {
2959                gpiobits = audioall;
2960                for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2961                        bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2962                }
2963        }
2964        bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2965        pr_info("%d: gpio config override: mask=0x%x, mux=",
2966                btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2967        for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2968                pr_cont("%s0x%x",
2969                        i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2970        }
2971        pr_cont("\n");
2972}
2973
2974/*
2975 * (most) board specific initialisations goes here
2976 */
2977
2978/* Some Modular Technology cards have an eeprom, but no subsystem ID */
2979static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2980{
2981        int type = -1;
2982
2983        if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2984                type = BTTV_BOARD_MODTEC_205;
2985        else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2986                type = BTTV_BOARD_EURESYS_PICOLO;
2987        else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2988                type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2989
2990        if (-1 != type) {
2991                btv->c.type = type;
2992                pr_info("%d: detected by eeprom: %s [card=%d]\n",
2993                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2994        }
2995}
2996
2997static void flyvideo_gpio(struct bttv *btv)
2998{
2999        int gpio, has_remote, has_radio, is_capture_only;
3000        int is_lr90, has_tda9820_tda9821;
3001        int tuner_type = UNSET, ttype;
3002
3003        gpio_inout(0xffffff, 0);
3004        udelay(8);  /* without this we would see the 0x1800 mask */
3005        gpio = gpio_read();
3006        /* FIXME: must restore OUR_EN ??? */
3007
3008        /* all cards provide GPIO info, some have an additional eeprom
3009         * LR50: GPIO coding can be found lower right CP1 .. CP9
3010         *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3011         *       GPIO14-12: n.c.
3012         * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3013
3014         * lowest 3 bytes are remote control codes (no handshake needed)
3015         * xxxFFF: No remote control chip soldered
3016         * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3017         * Note: Some bits are Audio_Mask !
3018         */
3019        ttype = (gpio & 0x0f0000) >> 16;
3020        switch (ttype) {
3021        case 0x0:
3022                tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3023                break;
3024        case 0x2:
3025                tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3026                break;
3027        case 0x4:
3028                tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3029                break;
3030        case 0x6:
3031                tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3032                break;
3033        case 0xC:
3034                tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3035                break;
3036        default:
3037                pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3038                break;
3039        }
3040
3041        has_remote          =   gpio & 0x800000;
3042        has_radio           =   gpio & 0x400000;
3043        /*   unknown                   0x200000;
3044         *   unknown2                  0x100000; */
3045        is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3046        has_tda9820_tda9821 = !(gpio & 0x004000);
3047        is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3048        /*
3049         * gpio & 0x001000    output bit for audio routing */
3050
3051        if (is_capture_only)
3052                tuner_type = TUNER_ABSENT; /* No tuner present */
3053
3054        pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3055                btv->c.nr, has_radio ? "yes" : "no",
3056                has_remote ? "yes" : "no", tuner_type, gpio);
3057        pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3058                btv->c.nr, is_lr90 ? "yes" : "no",
3059                has_tda9820_tda9821 ? "yes" : "no",
3060                is_capture_only ? "yes" : "no");
3061
3062        if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3063                btv->tuner_type = tuner_type;
3064        btv->has_radio = has_radio;
3065
3066        /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3067         * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3068         * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3069        if (has_tda9820_tda9821)
3070                btv->audio_mode_gpio = lt9415_audio;
3071        /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3072}
3073
3074static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3075                               14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3076static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3077                               1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3078
3079static void miro_pinnacle_gpio(struct bttv *btv)
3080{
3081        int id,msp,gpio;
3082        char *info;
3083
3084        gpio_inout(0xffffff, 0);
3085        gpio = gpio_read();
3086        id   = ((gpio>>10) & 63) -1;
3087        msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3088        if (id < 32) {
3089                btv->tuner_type = miro_tunermap[id];
3090                if (0 == (gpio & 0x20)) {
3091                        btv->has_radio = 1;
3092                        if (!miro_fmtuner[id]) {
3093                                btv->has_matchbox = 1;
3094                                btv->mbox_we    = (1<<6);
3095                                btv->mbox_most  = (1<<7);
3096                                btv->mbox_clk   = (1<<8);
3097                                btv->mbox_data  = (1<<9);
3098                                btv->mbox_mask  = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3099                        }
3100                } else {
3101                        btv->has_radio = 0;
3102                }
3103                if (-1 != msp) {
3104                        if (btv->c.type == BTTV_BOARD_MIRO)
3105                                btv->c.type = BTTV_BOARD_MIROPRO;
3106                        if (btv->c.type == BTTV_BOARD_PINNACLE)
3107                                btv->c.type = BTTV_BOARD_PINNACLEPRO;
3108                }
3109                pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3110                        btv->c.nr, id+1, btv->tuner_type,
3111                        !btv->has_radio ? "no" :
3112                        (btv->has_matchbox ? "matchbox" : "fmtuner"),
3113                        (-1 == msp) ? "no" : "yes");
3114        } else {
3115                /* new cards with microtune tuner */
3116                id = 63 - id;
3117                btv->has_radio = 0;
3118                switch (id) {
3119                case 1:
3120                        info = "PAL / mono";
3121                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3122                        break;
3123                case 2:
3124                        info = "PAL+SECAM / stereo";
3125                        btv->has_radio = 1;
3126                        btv->tda9887_conf = TDA9887_QSS;
3127                        break;
3128                case 3:
3129                        info = "NTSC / stereo";
3130                        btv->has_radio = 1;
3131                        btv->tda9887_conf = TDA9887_QSS;
3132                        break;
3133                case 4:
3134                        info = "PAL+SECAM / mono";
3135                        btv->tda9887_conf = TDA9887_QSS;
3136                        break;
3137                case 5:
3138                        info = "NTSC / mono";
3139                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3140                        break;
3141                case 6:
3142                        info = "NTSC / stereo";
3143                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3144                        break;
3145                case 7:
3146                        info = "PAL / stereo";
3147                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3148                        break;
3149                default:
3150                        info = "oops: unknown card";
3151                        break;
3152                }
3153                if (-1 != msp)
3154                        btv->c.type = BTTV_BOARD_PINNACLEPRO;
3155                pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3156                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3157                btv->tuner_type = TUNER_MT2032;
3158        }
3159}
3160
3161/* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3162#define LM1882_SYNC_DRIVE     0x200000L
3163
3164static void init_ids_eagle(struct bttv *btv)
3165{
3166        gpio_inout(0xffffff,0xFFFF37);
3167        gpio_write(0x200020);
3168
3169        /* flash strobe inverter ?! */
3170        gpio_write(0x200024);
3171
3172        /* switch sync drive off */
3173        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3174
3175        /* set BT848 muxel to 2 */
3176        btaor((2)<<5, ~(2<<5), BT848_IFORM);
3177}
3178
3179/* Muxsel helper for the IDS Eagle.
3180 * the eagles does not use the standard muxsel-bits but
3181 * has its own multiplexer */
3182static void eagle_muxsel(struct bttv *btv, unsigned int input)
3183{
3184        gpio_bits(3, input & 3);
3185
3186        /* composite */
3187        /* set chroma ADC to sleep */
3188        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3189        /* set to composite video */
3190        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3191        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3192
3193        /* switch sync drive off */
3194        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3195}
3196
3197static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3198{
3199        static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3200        gpio_write(masks[input%4]);
3201}
3202
3203/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3204   alarms output
3205
3206   GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3207   assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3208
3209   IN - sensor inputs, INx - sensor inputs and TI XORed together
3210   O1,O2,O3 - alarm outputs (relays)
3211
3212   OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3213
3214*/
3215
3216static void init_lmlbt4x(struct bttv *btv)
3217{
3218        pr_debug("LMLBT4x init\n");
3219        btwrite(0x000000, BT848_GPIO_REG_INP);
3220        gpio_inout(0xffffff, 0x0006C0);
3221        gpio_write(0x000000);
3222}
3223
3224static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3225{
3226        unsigned int inmux = input % 8;
3227        gpio_inout( 0xf, 0xf );
3228        gpio_bits( 0xf, inmux );
3229}
3230
3231static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3232{
3233        unsigned int inmux = input % 4;
3234        gpio_inout( 3<<9, 3<<9 );
3235        gpio_bits( 3<<9, inmux<<9 );
3236}
3237
3238static void geovision_muxsel(struct bttv *btv, unsigned int input)
3239{
3240        unsigned int inmux = input % 16;
3241        gpio_inout(0xf, 0xf);
3242        gpio_bits(0xf, inmux);
3243}
3244
3245/*
3246 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3247 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3248 * The muxes are controlled via a 74HC373 latch which is connected to
3249 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3250 * Q0 of the latch is connected to the Enable (~E) input of the first
3251 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3252 * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3253 */
3254
3255static void td3116_latch_value(struct bttv *btv, u32 value)
3256{
3257        gpio_bits((1<<18) | 0xff, value);
3258        gpio_bits((1<<18) | 0xff, (1<<18) | value);
3259        udelay(1);
3260        gpio_bits((1<<18) | 0xff, value);
3261}
3262
3263static void td3116_muxsel(struct bttv *btv, unsigned int input)
3264{
3265        u32 value;
3266        u32 highbit;
3267
3268        highbit = (input & 0x8) >> 3 ;
3269
3270        /* Disable outputs and set value in the mux */
3271        value = 0x11; /* Disable outputs */
3272        value |= ((input & 0x7) << 1)  << (4 * highbit);
3273        td3116_latch_value(btv, value);
3274
3275        /* Enable the correct output */
3276        value &= ~0x11;
3277        value |= ((highbit ^ 0x1) << 4) | highbit;
3278        td3116_latch_value(btv, value);
3279}
3280
3281/* ----------------------------------------------------------------------- */
3282
3283static void bttv_reset_audio(struct bttv *btv)
3284{
3285        /*
3286         * BT878A has a audio-reset register.
3287         * 1. This register is an audio reset function but it is in
3288         *    function-0 (video capture) address space.
3289         * 2. It is enough to do this once per power-up of the card.
3290         * 3. There is a typo in the Conexant doc -- it is not at
3291         *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3292         * --//Shrikumar 030609
3293         */
3294        if (btv->id != 878)
3295                return;
3296
3297        if (bttv_debug)
3298                pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3299        btwrite((1<<7), 0x058);
3300        udelay(10);
3301        btwrite(     0, 0x058);
3302}
3303
3304/* initialization part one -- before registering i2c bus */
3305void __devinit bttv_init_card1(struct bttv *btv)
3306{
3307        switch (btv->c.type) {
3308        case BTTV_BOARD_HAUPPAUGE:
3309        case BTTV_BOARD_HAUPPAUGE878:
3310                boot_msp34xx(btv,5);
3311                break;
3312        case BTTV_BOARD_VOODOOTV_200:
3313        case BTTV_BOARD_VOODOOTV_FM:
3314                boot_msp34xx(btv,20);
3315                break;
3316        case BTTV_BOARD_AVERMEDIA98:
3317                boot_msp34xx(btv,11);
3318                break;
3319        case BTTV_BOARD_HAUPPAUGEPVR:
3320                pvr_boot(btv);
3321                break;
3322        case BTTV_BOARD_TWINHAN_DST:
3323        case BTTV_BOARD_AVDVBT_771:
3324        case BTTV_BOARD_PINNACLESAT:
3325                btv->use_i2c_hw = 1;
3326                break;
3327        case BTTV_BOARD_ADLINK_RTV24:
3328                init_RTV24( btv );
3329                break;
3330
3331        }
3332        if (!bttv_tvcards[btv->c.type].has_dvb)
3333                bttv_reset_audio(btv);
3334}
3335
3336/* initialization part two -- after registering i2c bus */
3337void __devinit bttv_init_card2(struct bttv *btv)
3338{
3339        btv->tuner_type = UNSET;
3340
3341        if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3342                bttv_readee(btv,eeprom_data,0xa0);
3343                identify_by_eeprom(btv,eeprom_data);
3344        }
3345
3346        switch (btv->c.type) {
3347        case BTTV_BOARD_MIRO:
3348        case BTTV_BOARD_MIROPRO:
3349        case BTTV_BOARD_PINNACLE:
3350        case BTTV_BOARD_PINNACLEPRO:
3351                /* miro/pinnacle */
3352                miro_pinnacle_gpio(btv);
3353                break;
3354        case BTTV_BOARD_FLYVIDEO_98:
3355        case BTTV_BOARD_MAXI:
3356        case BTTV_BOARD_LIFE_FLYKIT:
3357        case BTTV_BOARD_FLYVIDEO:
3358        case BTTV_BOARD_TYPHOON_TVIEW:
3359        case BTTV_BOARD_CHRONOS_VS2:
3360        case BTTV_BOARD_FLYVIDEO_98FM:
3361        case BTTV_BOARD_FLYVIDEO2000:
3362        case BTTV_BOARD_FLYVIDEO98EZ:
3363        case BTTV_BOARD_CONFERENCETV:
3364        case BTTV_BOARD_LIFETEC_9415:
3365                flyvideo_gpio(btv);
3366                break;
3367        case BTTV_BOARD_HAUPPAUGE:
3368        case BTTV_BOARD_HAUPPAUGE878:
3369        case BTTV_BOARD_HAUPPAUGEPVR:
3370                /* pick up some config infos from the eeprom */
3371                bttv_readee(btv,eeprom_data,0xa0);
3372                hauppauge_eeprom(btv);
3373                break;
3374        case BTTV_BOARD_AVERMEDIA98:
3375        case BTTV_BOARD_AVPHONE98:
3376                bttv_readee(btv,eeprom_data,0xa0);
3377                avermedia_eeprom(btv);
3378                break;
3379        case BTTV_BOARD_PXC200:
3380                init_PXC200(btv);
3381                break;
3382        case BTTV_BOARD_PICOLO_TETRA_CHIP:
3383                picolo_tetra_init(btv);
3384                break;
3385        case BTTV_BOARD_VHX:
3386                btv->has_radio    = 1;
3387                btv->has_matchbox = 1;
3388                btv->mbox_we      = 0x20;
3389                btv->mbox_most    = 0;
3390                btv->mbox_clk     = 0x08;
3391                btv->mbox_data    = 0x10;
3392                btv->mbox_mask    = 0x38;
3393                break;
3394        case BTTV_BOARD_VOBIS_BOOSTAR:
3395        case BTTV_BOARD_TERRATV:
3396                terratec_active_radio_upgrade(btv);
3397                break;
3398        case BTTV_BOARD_MAGICTVIEW061:
3399                if (btv->cardid == 0x3002144f) {
3400                        btv->has_radio=1;
3401                        pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3402                                btv->c.nr);
3403                }
3404                break;
3405        case BTTV_BOARD_STB2:
3406                if (btv->cardid == 0x3060121a) {
3407                        /* Fix up entry for 3DFX VoodooTV 100,
3408                           which is an OEM STB card variant. */
3409                        btv->has_radio=0;
3410                        btv->tuner_type=TUNER_TEMIC_NTSC;
3411                }
3412                break;
3413        case BTTV_BOARD_OSPREY1x0:
3414        case BTTV_BOARD_OSPREY1x0_848:
3415        case BTTV_BOARD_OSPREY101_848:
3416        case BTTV_BOARD_OSPREY1x1:
3417        case BTTV_BOARD_OSPREY1x1_SVID:
3418        case BTTV_BOARD_OSPREY2xx:
3419        case BTTV_BOARD_OSPREY2x0_SVID:
3420        case BTTV_BOARD_OSPREY2x0:
3421        case BTTV_BOARD_OSPREY440:
3422        case BTTV_BOARD_OSPREY500:
3423        case BTTV_BOARD_OSPREY540:
3424        case BTTV_BOARD_OSPREY2000:
3425                bttv_readee(btv,eeprom_data,0xa0);
3426                osprey_eeprom(btv, eeprom_data);
3427                break;
3428        case BTTV_BOARD_IDS_EAGLE:
3429                init_ids_eagle(btv);
3430                break;
3431        case BTTV_BOARD_MODTEC_205:
3432                bttv_readee(btv,eeprom_data,0xa0);
3433                modtec_eeprom(btv);
3434                break;
3435        case BTTV_BOARD_LMLBT4:
3436                init_lmlbt4x(btv);
3437                break;
3438        case BTTV_BOARD_TIBET_CS16:
3439                tibetCS16_init(btv);
3440                break;
3441        case BTTV_BOARD_KODICOM_4400R:
3442                kodicom4400r_init(btv);
3443                break;
3444        case BTTV_BOARD_GEOVISION_GV800S:
3445                gv800s_init(btv);
3446                break;
3447        }
3448
3449        /* pll configuration */
3450        if (!(btv->id==848 && btv->revision==0x11)) {
3451                /* defaults from card list */
3452                if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3453                        btv->pll.pll_ifreq=28636363;
3454                        btv->pll.pll_crystal=BT848_IFORM_XT0;
3455                }
3456                if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3457                        btv->pll.pll_ifreq=35468950;
3458                        btv->pll.pll_crystal=BT848_IFORM_XT1;
3459                }
3460                /* insmod options can override */
3461                switch (pll[btv->c.nr]) {
3462                case 0: /* none */
3463                        btv->pll.pll_crystal = 0;
3464                        btv->pll.pll_ifreq   = 0;
3465                        btv->pll.pll_ofreq   = 0;
3466                        break;
3467                case 1: /* 28 MHz */
3468                case 28:
3469                        btv->pll.pll_ifreq   = 28636363;
3470                        btv->pll.pll_ofreq   = 0;
3471                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3472                        break;
3473                case 2: /* 35 MHz */
3474                case 35:
3475                        btv->pll.pll_ifreq   = 35468950;
3476                        btv->pll.pll_ofreq   = 0;
3477                        btv->pll.pll_crystal = BT848_IFORM_XT1;
3478                        break;
3479                }
3480        }
3481        btv->pll.pll_current = -1;
3482
3483        /* tuner configuration (from card list / autodetect / insmod option) */
3484        if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3485                if (UNSET == btv->tuner_type)
3486                        btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3487        if (UNSET != tuner[btv->c.nr])
3488                btv->tuner_type = tuner[btv->c.nr];
3489
3490        if (btv->tuner_type == TUNER_ABSENT)
3491                pr_info("%d: tuner absent\n", btv->c.nr);
3492        else if (btv->tuner_type == UNSET)
3493                pr_warn("%d: tuner type unset\n", btv->c.nr);
3494        else
3495                pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3496
3497        if (autoload != UNSET) {
3498                pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3499                pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3500                        btv->c.nr);
3501        }
3502
3503        if (UNSET == btv->tuner_type)
3504                btv->tuner_type = TUNER_ABSENT;
3505
3506        btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3507                   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3508        btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3509                    UNSET : bttv_tvcards[btv->c.type].svhs;
3510        if (svhs[btv->c.nr] != UNSET)
3511                btv->svhs = svhs[btv->c.nr];
3512        if (remote[btv->c.nr] != UNSET)
3513                btv->has_remote = remote[btv->c.nr];
3514
3515        if (bttv_tvcards[btv->c.type].has_radio)
3516                btv->has_radio = 1;
3517        if (bttv_tvcards[btv->c.type].has_remote)
3518                btv->has_remote = 1;
3519        if (!bttv_tvcards[btv->c.type].no_gpioirq)
3520                btv->gpioirq = 1;
3521        if (bttv_tvcards[btv->c.type].volume_gpio)
3522                btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3523        if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3524                btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3525
3526        if (btv->tuner_type == TUNER_ABSENT)
3527                return;  /* no tuner or related drivers to load */
3528
3529        if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3530                /* Probe for RDS receiver chip */
3531                static const unsigned short addrs[] = {
3532                        0x20 >> 1,
3533                        0x22 >> 1,
3534                        I2C_CLIENT_END
3535                };
3536                struct v4l2_subdev *sd;
3537
3538                sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3539                        &btv->c.i2c_adap, "saa6588", 0, addrs);
3540                btv->has_saa6588 = (sd != NULL);
3541        }
3542
3543        /* try to detect audio/fader chips */
3544
3545        /* First check if the user specified the audio chip via a module
3546           option. */
3547
3548        switch (audiodev[btv->c.nr]) {
3549        case -1:
3550                return; /* do not load any audio module */
3551
3552        case 0: /* autodetect */
3553                break;
3554
3555        case 1: {
3556                /* The user specified that we should probe for msp3400 */
3557                static const unsigned short addrs[] = {
3558                        I2C_ADDR_MSP3400 >> 1,
3559                        I2C_ADDR_MSP3400_ALT >> 1,
3560                        I2C_CLIENT_END
3561                };
3562
3563                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3564                        &btv->c.i2c_adap, "msp3400", 0, addrs);
3565                if (btv->sd_msp34xx)
3566                        return;
3567                goto no_audio;
3568        }
3569
3570        case 2: {
3571                /* The user specified that we should probe for tda7432 */
3572                static const unsigned short addrs[] = {
3573                        I2C_ADDR_TDA7432 >> 1,
3574                        I2C_CLIENT_END
3575                };
3576
3577                if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3578                                &btv->c.i2c_adap, "tda7432", 0, addrs))
3579                        return;
3580                goto no_audio;
3581        }
3582
3583        case 3: {
3584                /* The user specified that we should probe for tvaudio */
3585                btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3586                        &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3587                if (btv->sd_tvaudio)
3588                        return;
3589                goto no_audio;
3590        }
3591
3592        default:
3593                pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3594                return;
3595        }
3596
3597        /* There were no overrides, so now we try to discover this through the
3598           card definition */
3599
3600        /* probe for msp3400 first: this driver can detect whether or not
3601           it really is a msp3400, so it will return NULL when the device
3602           found is really something else (e.g. a tea6300). */
3603        if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3604                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3605                        &btv->c.i2c_adap, "msp3400",
3606                        0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3607        } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3608                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3609                        &btv->c.i2c_adap, "msp3400",
3610                        0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3611        }
3612
3613        /* If we found a msp34xx, then we're done. */
3614        if (btv->sd_msp34xx)
3615                return;
3616
3617        /* it might also be a tda7432. */
3618        if (!bttv_tvcards[btv->c.type].no_tda7432) {
3619                static const unsigned short addrs[] = {
3620                        I2C_ADDR_TDA7432 >> 1,
3621                        I2C_CLIENT_END
3622                };
3623
3624                if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3625                                &btv->c.i2c_adap, "tda7432", 0, addrs))
3626                        return;
3627        }
3628
3629        /* Now see if we can find one of the tvaudio devices. */
3630        btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3631                &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3632        if (btv->sd_tvaudio)
3633                return;
3634
3635no_audio:
3636        pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3637}
3638
3639
3640/* initialize the tuner */
3641void __devinit bttv_init_tuner(struct bttv *btv)
3642{
3643        int addr = ADDR_UNSET;
3644
3645        if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3646                addr = bttv_tvcards[btv->c.type].tuner_addr;
3647
3648        if (btv->tuner_type != TUNER_ABSENT) {
3649                struct tuner_setup tun_setup;
3650
3651                /* Load tuner module before issuing tuner config call! */
3652                if (bttv_tvcards[btv->c.type].has_radio)
3653                        v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3654                                &btv->c.i2c_adap, "tuner",
3655                                0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3656                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3657                                &btv->c.i2c_adap, "tuner",
3658                                0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3659                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3660                                &btv->c.i2c_adap, "tuner",
3661                                0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3662
3663                tun_setup.mode_mask = T_ANALOG_TV;
3664                tun_setup.type = btv->tuner_type;
3665                tun_setup.addr = addr;
3666
3667                if (bttv_tvcards[btv->c.type].has_radio)
3668                        tun_setup.mode_mask |= T_RADIO;
3669
3670                bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3671        }
3672
3673        if (btv->tda9887_conf) {
3674                struct v4l2_priv_tun_config tda9887_cfg;
3675
3676                tda9887_cfg.tuner = TUNER_TDA9887;
3677                tda9887_cfg.priv = &btv->tda9887_conf;
3678
3679                bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3680        }
3681}
3682
3683/* ----------------------------------------------------------------------- */
3684
3685static void modtec_eeprom(struct bttv *btv)
3686{
3687        if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3688                btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3689                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3690                        btv->c.nr, &eeprom_data[0x1e]);
3691        } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3692                btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3693                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3694                        btv->c.nr, &eeprom_data[0x1e]);
3695        } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3696                btv->tuner_type=TUNER_PHILIPS_NTSC;
3697                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3698                        btv->c.nr, &eeprom_data[0x1e]);
3699        } else {
3700                pr_info("%d: Modtec: Unknown TunerString: %s\n",
3701                        btv->c.nr, &eeprom_data[0x1e]);
3702        }
3703}
3704
3705static void __devinit hauppauge_eeprom(struct bttv *btv)
3706{
3707        struct tveeprom tv;
3708
3709        tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3710        btv->tuner_type = tv.tuner_type;
3711        btv->has_radio  = tv.has_radio;
3712
3713        pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3714                btv->c.nr, tv.model);
3715
3716        /*
3717         * Some of the 878 boards have duplicate PCI IDs. Switch the board
3718         * type based on model #.
3719         */
3720        if(tv.model == 64900) {
3721                pr_info("%d: Switching board type from %s to %s\n",
3722                        btv->c.nr,
3723                        bttv_tvcards[btv->c.type].name,
3724                        bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3725                btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3726        }
3727}
3728
3729static int terratec_active_radio_upgrade(struct bttv *btv)
3730{
3731        int freq;
3732
3733        btv->has_radio    = 1;
3734        btv->has_matchbox = 1;
3735        btv->mbox_we      = 0x10;
3736        btv->mbox_most    = 0x20;
3737        btv->mbox_clk     = 0x08;
3738        btv->mbox_data    = 0x04;
3739        btv->mbox_mask    = 0x3c;
3740
3741        btv->mbox_iow     = 1 <<  8;
3742        btv->mbox_ior     = 1 <<  9;
3743        btv->mbox_csel    = 1 << 10;
3744
3745        freq=88000/62.5;
3746        tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3747        if (0x1ed8 == tea5757_read(btv)) {
3748                pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3749                btv->has_radio    = 1;
3750                btv->has_saa6588  = 1;
3751                btv->has_matchbox = 1;
3752        } else {
3753                btv->has_radio    = 0;
3754                btv->has_matchbox = 0;
3755        }
3756        return 0;
3757}
3758
3759
3760/* ----------------------------------------------------------------------- */
3761
3762/*
3763 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3764 *
3765 * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3766 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3767 * unpacked with unzip).
3768 */
3769#define PVR_GPIO_DELAY          10
3770
3771#define BTTV_ALT_DATA           0x000001
3772#define BTTV_ALT_DCLK           0x100000
3773#define BTTV_ALT_NCONFIG        0x800000
3774
3775static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3776                                     u32 microlen)
3777{
3778        u32 n;
3779        u8 bits;
3780        int i;
3781
3782        gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3783        gpio_write(0);
3784        udelay(PVR_GPIO_DELAY);
3785
3786        gpio_write(BTTV_ALT_NCONFIG);
3787        udelay(PVR_GPIO_DELAY);
3788
3789        for (n = 0; n < microlen; n++) {
3790                bits = micro[n];
3791                for (i = 0 ; i < 8 ; i++) {
3792                        gpio_bits(BTTV_ALT_DCLK,0);
3793                        if (bits & 0x01)
3794                                gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3795                        else
3796                                gpio_bits(BTTV_ALT_DATA,0);
3797                        gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3798                        bits >>= 1;
3799                }
3800        }
3801        gpio_bits(BTTV_ALT_DCLK,0);
3802        udelay(PVR_GPIO_DELAY);
3803
3804        /* begin Altera init loop (Not necessary,but doesn't hurt) */
3805        for (i = 0 ; i < 30 ; i++) {
3806                gpio_bits(BTTV_ALT_DCLK,0);
3807                gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3808        }
3809        gpio_bits(BTTV_ALT_DCLK,0);
3810        return 0;
3811}
3812
3813static int __devinit pvr_boot(struct bttv *btv)
3814{
3815        const struct firmware *fw_entry;
3816        int rc;
3817
3818        rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3819        if (rc != 0) {
3820                pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3821                return rc;
3822        }
3823        rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3824        pr_info("%d: altera firmware upload %s\n",
3825                btv->c.nr, (rc < 0) ? "failed" : "ok");
3826        release_firmware(fw_entry);
3827        return rc;
3828}
3829
3830/* ----------------------------------------------------------------------- */
3831/* some osprey specific stuff                                              */
3832
3833static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3834{
3835        int i;
3836        u32 serial = 0;
3837        int cardid = -1;
3838
3839        /* This code will nevery actually get called in this case.... */
3840        if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3841                /* this might be an antique... check for MMAC label in eeprom */
3842                if (!strncmp(ee, "MMAC", 4)) {
3843                        u8 checksum = 0;
3844                        for (i = 0; i < 21; i++)
3845                                checksum += ee[i];
3846                        if (checksum != ee[21])
3847                                return;
3848                        cardid = BTTV_BOARD_OSPREY1x0_848;
3849                        for (i = 12; i < 21; i++)
3850                                serial *= 10, serial += ee[i] - '0';
3851                }
3852        } else {
3853                unsigned short type;
3854
3855                for (i = 4*16; i < 8*16; i += 16) {
3856                        u16 checksum = ip_compute_csum(ee + i, 16);
3857
3858                        if ((checksum&0xff) + (checksum>>8) == 0xff)
3859                                break;
3860                }
3861                if (i >= 8*16)
3862                        return;
3863                ee += i;
3864
3865                /* found a valid descriptor */
3866                type = get_unaligned_be16((__be16 *)(ee+4));
3867
3868                switch(type) {
3869                /* 848 based */
3870                case 0x0004:
3871                        cardid = BTTV_BOARD_OSPREY1x0_848;
3872                        break;
3873                case 0x0005:
3874                        cardid = BTTV_BOARD_OSPREY101_848;
3875                        break;
3876
3877                /* 878 based */
3878                case 0x0012:
3879                case 0x0013:
3880                        cardid = BTTV_BOARD_OSPREY1x0;
3881                        break;
3882                case 0x0014:
3883                case 0x0015:
3884                        cardid = BTTV_BOARD_OSPREY1x1;
3885                        break;
3886                case 0x0016:
3887                case 0x0017:
3888                case 0x0020:
3889                        cardid = BTTV_BOARD_OSPREY1x1_SVID;
3890                        break;
3891                case 0x0018:
3892                case 0x0019:
3893                case 0x001E:
3894                case 0x001F:
3895                        cardid = BTTV_BOARD_OSPREY2xx;
3896                        break;
3897                case 0x001A:
3898                case 0x001B:
3899                        cardid = BTTV_BOARD_OSPREY2x0_SVID;
3900                        break;
3901                case 0x0040:
3902                        cardid = BTTV_BOARD_OSPREY500;
3903                        break;
3904                case 0x0050:
3905                case 0x0056:
3906                        cardid = BTTV_BOARD_OSPREY540;
3907                        /* bttv_osprey_540_init(btv); */
3908                        break;
3909                case 0x0060:
3910                case 0x0070:
3911                case 0x00A0:
3912                        cardid = BTTV_BOARD_OSPREY2x0;
3913                        /* enable output on select control lines */
3914                        gpio_inout(0xffffff,0x000303);
3915                        break;
3916                case 0x00D8:
3917                        cardid = BTTV_BOARD_OSPREY440;
3918                        break;
3919                default:
3920                        /* unknown...leave generic, but get serial # */
3921                        pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
3922                                btv->c.nr, type);
3923                        break;
3924                }
3925                serial = get_unaligned_be32((__be32 *)(ee+6));
3926        }
3927
3928        pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
3929                btv->c.nr, cardid,
3930                cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3931
3932        if (cardid<0 || btv->c.type == cardid)
3933                return;
3934
3935        /* card type isn't set correctly */
3936        if (card[btv->c.nr] < bttv_num_tvcards) {
3937                pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
3938                        btv->c.nr);
3939        } else {
3940                pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
3941                        btv->c.nr, btv->c.type, cardid);
3942                btv->c.type = cardid;
3943        }
3944}
3945
3946/* ----------------------------------------------------------------------- */
3947/* AVermedia specific stuff, from  bktr_card.c                             */
3948
3949static int tuner_0_table[] = {
3950        TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
3951        TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
3952        TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
3953        TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3954        TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3955        TUNER_PHILIPS_FM1216ME_MK3 };
3956
3957static int tuner_1_table[] = {
3958        TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
3959        TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3960        TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
3961        TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3962        TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3963
3964static void __devinit avermedia_eeprom(struct bttv *btv)
3965{
3966        int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3967
3968        tuner_make      = (eeprom_data[0x41] & 0x7);
3969        tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
3970        tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
3971        btv->has_remote = (eeprom_data[0x42] & 0x01);
3972
3973        if (tuner_make == 0 || tuner_make == 2)
3974                if (tuner_format <= 0x0a)
3975                        tuner_type = tuner_0_table[tuner_format];
3976        if (tuner_make == 1)
3977                if (tuner_format <= 9)
3978                        tuner_type = tuner_1_table[tuner_format];
3979
3980        if (tuner_make == 4)
3981                if (tuner_format == 0x09)
3982                        tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3983
3984        pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3985                btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3986        if (tuner_type) {
3987                btv->tuner_type = tuner_type;
3988                pr_cont("%d", tuner_type);
3989        } else
3990                pr_cont("Unknown type");
3991        pr_cont(" radio:%s remote control:%s\n",
3992               tuner_tv_fm     ? "yes" : "no",
3993               btv->has_remote ? "yes" : "no");
3994}
3995
3996/*
3997 * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
3998 * analog demod, which is not I2C controlled like the newer and more common
3999 * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
4000 * that control the IF for the video and audio.  Apparently, bttv GPIO
4001 * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4002 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4003 */
4004u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4005{
4006
4007        if (btv->audio == TVAUDIO_INPUT_TUNER) {
4008                if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4009                        gpiobits |= 0x10000;
4010                else
4011                        gpiobits &= ~0x10000;
4012        }
4013
4014        gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4015        return gpiobits;
4016}
4017
4018
4019/*
4020 * reset/enable the MSP on some Hauppauge cards
4021 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4022 *
4023 * Hauppauge:  pin  5
4024 * Voodoo:     pin 20
4025 */
4026static void __devinit boot_msp34xx(struct bttv *btv, int pin)
4027{
4028        int mask = (1 << pin);
4029
4030        gpio_inout(mask,mask);
4031        gpio_bits(mask,0);
4032        mdelay(2);
4033        udelay(500);
4034        gpio_bits(mask,mask);
4035
4036        if (bttv_gpio)
4037                bttv_gpio_tracking(btv,"msp34xx");
4038        if (bttv_verbose)
4039                pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4040                        btv->c.nr, pin);
4041}
4042
4043/* ----------------------------------------------------------------------- */
4044/*  Imagenation L-Model PXC200 Framegrabber */
4045/*  This is basically the same procedure as
4046 *  used by Alessandro Rubini in his pxc200
4047 *  driver, but using BTTV functions */
4048
4049static void __devinit init_PXC200(struct bttv *btv)
4050{
4051        static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4052                                            0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4053                                            0x00 };
4054        unsigned int i;
4055        int tmp;
4056        u32 val;
4057
4058        /* Initialise GPIO-connevted stuff */
4059        gpio_inout(0xffffff, (1<<13));
4060        gpio_write(0);
4061        udelay(3);
4062        gpio_write(1<<13);
4063        /* GPIO inputs are pulled up, so no need to drive
4064         * reset pin any longer */
4065        gpio_bits(0xffffff, 0);
4066        if (bttv_gpio)
4067                bttv_gpio_tracking(btv,"pxc200");
4068
4069        /*  we could/should try and reset/control the AD pots? but
4070            right now  we simply  turned off the crushing.  Without
4071            this the AGC drifts drifts
4072            remember the EN is reverse logic -->
4073            setting BT848_ADC_AGC_EN disable the AGC
4074            tboult@eecs.lehigh.edu
4075        */
4076
4077        btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4078
4079        /*      Initialise MAX517 DAC */
4080        pr_info("Setting DAC reference voltage level ...\n");
4081        bttv_I2CWrite(btv,0x5E,0,0x80,1);
4082
4083        /*      Initialise 12C508 PIC */
4084        /*      The I2CWrite and I2CRead commmands are actually to the
4085         *      same chips - but the R/W bit is included in the address
4086         *      argument so the numbers are different */
4087
4088
4089        pr_info("Initialising 12C508 PIC chip ...\n");
4090
4091        /* First of all, enable the clock line. This is used in the PXC200-F */
4092        val = btread(BT848_GPIO_DMA_CTL);
4093        val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4094        btwrite(val, BT848_GPIO_DMA_CTL);
4095
4096        /* Then, push to 0 the reset pin long enough to reset the *
4097         * device same as above for the reset line, but not the same
4098         * value sent to the GPIO-connected stuff
4099         * which one is the good one? */
4100        gpio_inout(0xffffff,(1<<2));
4101        gpio_write(0);
4102        udelay(10);
4103        gpio_write(1<<2);
4104
4105        for (i = 0; i < ARRAY_SIZE(vals); i++) {
4106                tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4107                if (tmp != -1) {
4108                        pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4109                               vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4110                }
4111        }
4112
4113        pr_info("PXC200 Initialised\n");
4114}
4115
4116
4117
4118/* ----------------------------------------------------------------------- */
4119/*
4120 *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4121 *  it. This apparently involves the following procedure for each 878 chip:
4122 *
4123 *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4124 *
4125 *  2)  write to GPIO_DATA
4126 *      - 0x0E
4127 *      - sleep 1ms
4128 *      - 0x10 + 0x0E
4129 *      - sleep 10ms
4130 *      - 0x0E
4131 *     read from GPIO_DATA into buf (uint_32)
4132 *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4133 *                 error. ERROR_CPLD_Check_Failed stop.
4134 *
4135 *  3) write to GPIO_DATA
4136 *      - write 0x4400 + 0x0E
4137 *      - sleep 10ms
4138 *      - write 0x4410 + 0x0E
4139 *      - sleep 1ms
4140 *      - write 0x0E
4141 *     read from GPIO_DATA into buf (uint_32)
4142 *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4143 *                error. ERROR_CPLD_Check_Failed.
4144 */
4145/* ----------------------------------------------------------------------- */
4146static void
4147init_RTV24 (struct bttv *btv)
4148{
4149        uint32_t dataRead = 0;
4150        long watchdog_value = 0x0E;
4151
4152        pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4153                btv->c.nr);
4154
4155        btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4156
4157        btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4158        msleep (1);
4159        btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4160        msleep (10);
4161        btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4162
4163        dataRead = btread (BT848_GPIO_DATA);
4164
4165        if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4166                pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4167                        btv->c.nr, dataRead);
4168        }
4169
4170        btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4171        msleep (10);
4172        btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4173        msleep (1);
4174        btwrite (watchdog_value, BT848_GPIO_DATA);
4175        msleep (1);
4176        dataRead = btread (BT848_GPIO_DATA);
4177
4178        if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4179                pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4180                        btv->c.nr, dataRead);
4181
4182                return;
4183        }
4184
4185        pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4186}
4187
4188
4189
4190/* ----------------------------------------------------------------------- */
4191/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports     */
4192/*
4193 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4194 * This code is placed under the terms of the GNU General Public License
4195 *
4196 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4197 */
4198
4199static void bus_low(struct bttv *btv, int bit)
4200{
4201        if (btv->mbox_ior) {
4202                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4203                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4204                udelay(5);
4205        }
4206
4207        gpio_bits(bit,0);
4208        udelay(5);
4209
4210        if (btv->mbox_ior) {
4211                gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4212                udelay(5);
4213        }
4214}
4215
4216static void bus_high(struct bttv *btv, int bit)
4217{
4218        if (btv->mbox_ior) {
4219                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4220                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4221                udelay(5);
4222        }
4223
4224        gpio_bits(bit,bit);
4225        udelay(5);
4226
4227        if (btv->mbox_ior) {
4228                gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4229                udelay(5);
4230        }
4231}
4232
4233static int bus_in(struct bttv *btv, int bit)
4234{
4235        if (btv->mbox_ior) {
4236                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4237                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4238                udelay(5);
4239
4240                gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4241                udelay(5);
4242        }
4243        return gpio_read() & (bit);
4244}
4245
4246/* TEA5757 register bits */
4247#define TEA_FREQ                0:14
4248#define TEA_BUFFER              15:15
4249
4250#define TEA_SIGNAL_STRENGTH     16:17
4251
4252#define TEA_PORT1               18:18
4253#define TEA_PORT0               19:19
4254
4255#define TEA_BAND                20:21
4256#define TEA_BAND_FM             0
4257#define TEA_BAND_MW             1
4258#define TEA_BAND_LW             2
4259#define TEA_BAND_SW             3
4260
4261#define TEA_MONO                22:22
4262#define TEA_ALLOW_STEREO        0
4263#define TEA_FORCE_MONO          1
4264
4265#define TEA_SEARCH_DIRECTION    23:23
4266#define TEA_SEARCH_DOWN         0
4267#define TEA_SEARCH_UP           1
4268
4269#define TEA_STATUS              24:24
4270#define TEA_STATUS_TUNED        0
4271#define TEA_STATUS_SEARCHING    1
4272
4273/* Low-level stuff */
4274static int tea5757_read(struct bttv *btv)
4275{
4276        unsigned long timeout;
4277        int value = 0;
4278        int i;
4279
4280        /* better safe than sorry */
4281        gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4282
4283        if (btv->mbox_ior) {
4284                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4285                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4286                udelay(5);
4287        }
4288
4289        if (bttv_gpio)
4290                bttv_gpio_tracking(btv,"tea5757 read");
4291
4292        bus_low(btv,btv->mbox_we);
4293        bus_low(btv,btv->mbox_clk);
4294
4295        udelay(10);
4296        timeout= jiffies + msecs_to_jiffies(1000);
4297
4298        /* wait for DATA line to go low; error if it doesn't */
4299        while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4300                schedule();
4301        if (bus_in(btv,btv->mbox_data)) {
4302                pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
4303                return -1;
4304        }
4305
4306        dprintk("%d: tea5757:", btv->c.nr);
4307        for (i = 0; i < 24; i++) {
4308                udelay(5);
4309                bus_high(btv,btv->mbox_clk);
4310                udelay(5);
4311                dprintk_cont("%c",
4312                             bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
4313                bus_low(btv,btv->mbox_clk);
4314                value <<= 1;
4315                value |= (bus_in(btv,btv->mbox_data) == 0)?0:1;  /* MSB first */
4316                dprintk_cont("%c",
4317                             bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
4318        }
4319        dprintk_cont("\n");
4320        dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
4321        return value;
4322}
4323
4324static int tea5757_write(struct bttv *btv, int value)
4325{
4326        int i;
4327        int reg = value;
4328
4329        gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4330
4331        if (btv->mbox_ior) {
4332                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4333                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4334                udelay(5);
4335        }
4336        if (bttv_gpio)
4337                bttv_gpio_tracking(btv,"tea5757 write");
4338
4339        dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
4340        bus_low(btv,btv->mbox_clk);
4341        bus_high(btv,btv->mbox_we);
4342        for (i = 0; i < 25; i++) {
4343                if (reg & 0x1000000)
4344                        bus_high(btv,btv->mbox_data);
4345                else
4346                        bus_low(btv,btv->mbox_data);
4347                reg <<= 1;
4348                bus_high(btv,btv->mbox_clk);
4349                udelay(10);
4350                bus_low(btv,btv->mbox_clk);
4351                udelay(10);
4352        }
4353        bus_low(btv,btv->mbox_we);  /* unmute !!! */
4354        return 0;
4355}
4356
4357void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4358{
4359        dprintk("tea5757_set_freq %d\n",freq);
4360        tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4361}
4362
4363/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4364 *
4365 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4366 * switch instead (CD22M3494E). This IC can have multiple active connections
4367 * between Xn (input) and Yn (output) pins. We need to clear any existing
4368 * connection prior to establish a new one, pulsing the STROBE pin.
4369 *
4370 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4371 * GPIO pins are wired as:
4372 *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4373 *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4374 *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4375 *  GPIO[8]   -                  - P3[5] (microcontroller)
4376 *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4377 *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4378 *  GPINTR    -                  - P3[4] (microcontroller)
4379 *
4380 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4381 * configuration either directly (as we are doing) or using the microcontroller
4382 * which is also wired to I2C interface. I have no further info on the
4383 * microcontroller features, one would need to disassembly the firmware.
4384 * note: the vendor refused to give any information on this product, all
4385 *       that stuff was found using a multimeter! :)
4386 */
4387static void rv605_muxsel(struct bttv *btv, unsigned int input)
4388{
4389        static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4390                                      0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4391
4392        gpio_bits(0x07f, muxgpio[input]);
4393
4394        /* reset all conections */
4395        gpio_bits(0x200,0x200);
4396        mdelay(1);
4397        gpio_bits(0x200,0x000);
4398        mdelay(1);
4399
4400        /* create a new connection */
4401        gpio_bits(0x480,0x480);
4402        mdelay(1);
4403        gpio_bits(0x480,0x080);
4404        mdelay(1);
4405}
4406
4407/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4408 *
4409 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4410 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4411 * chips, ten eight input analog multiplexors, a not chip and a few
4412 * other components.
4413 *
4414 * 16 inputs on a secondary bracket are provided and can be selected
4415 * from each of the four capture chips.  Two of the eight input
4416 * multiplexors are used to select from any of the 16 input signals.
4417 *
4418 * Unsupported hardware capabilities:
4419 *  . A video output monitor on the secondary bracket can be selected from
4420 *    one of the 878A chips.
4421 *  . Another passthrough but I haven't spent any time investigating it.
4422 *  . Digital I/O (logic level connected to GPIO) is available from an
4423 *    onboard header.
4424 *
4425 * The on chip input mux should always be set to 2.
4426 * GPIO[16:19] - Video input selection
4427 * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4428 * GPIO[?:?]   - Digital I/O.
4429 *
4430 * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4431 * determined what function (if any) it provides.  With the microcontroller
4432 * and sync separator chips a guess is that it might have to do with video
4433 * switching and maybe some digital I/O.
4434 */
4435static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4436{
4437        /* video mux */
4438        gpio_bits(0x0f0000, input << 16);
4439}
4440
4441static void tibetCS16_init(struct bttv *btv)
4442{
4443        /* enable gpio bits, mask obtained via btSpy */
4444        gpio_inout(0xffffff, 0x0f7fff);
4445        gpio_write(0x0f7fff);
4446}
4447
4448/*
4449 * The following routines for the Kodicom-4400r get a little mind-twisting.
4450 * There is a "master" controller and three "slave" controllers, together
4451 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4452 * The analog switch is controlled by the "master", but the detection order
4453 * of the four BT878A chips is in an order which I just don't understand.
4454 * The "master" is actually the second controller to be detected.  The
4455 * logic on the board uses logical numbers for the 4 controllers, but
4456 * those numbers are different from the detection sequence.  When working
4457 * with the analog switch, we need to "map" from the detection sequence
4458 * over to the board's logical controller number.  This mapping sequence
4459 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4460 * unit 3, the second (which is the master) is logical unit 0, etc.
4461 * We need to maintain the status of the analog switch (which of the 16
4462 * cameras is connected to which of the 4 controllers).  Rather than
4463 * add to the bttv structure for this, we use the data reserved for
4464 * the mbox (unused for this card type).
4465 */
4466
4467/*
4468 * First a routine to set the analog switch, which controls which camera
4469 * is routed to which controller.  The switch comprises an X-address
4470 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4471 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4472 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4473 * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4474 * specified address.  The idea is to set the address and data, then bring
4475 * STROBE high, and finally bring STROBE back to low.
4476 */
4477static void kodicom4400r_write(struct bttv *btv,
4478                               unsigned char xaddr,
4479                               unsigned char yaddr,
4480                               unsigned char data) {
4481        unsigned int udata;
4482
4483        udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4484        gpio_bits(0x1ff, udata);                /* write ADDR and DAT */
4485        gpio_bits(0x1ff, udata | (1 << 8));     /* strobe high */
4486        gpio_bits(0x1ff, udata);                /* strobe low */
4487}
4488
4489/*
4490 * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4491 * use this routine.  The routine finds the "master" for the card, maps
4492 * the controller number from the detected position over to the logical
4493 * number, writes the appropriate data to the analog switch, and housekeeps
4494 * the local copy of the switch information.  The parameter 'input' is the
4495 * requested camera number (0 - 15).
4496 */
4497static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4498{
4499        char *sw_status;
4500        int xaddr, yaddr;
4501        struct bttv *mctlr;
4502        static unsigned char map[4] = {3, 0, 2, 1};
4503
4504        mctlr = master[btv->c.nr];
4505        if (mctlr == NULL) {    /* ignore if master not yet detected */
4506                return;
4507        }
4508        yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4509        yaddr = map[yaddr];
4510        sw_status = (char *)(&mctlr->mbox_we);
4511        xaddr = input & 0xf;
4512        /* Check if the controller/camera pair has changed, else ignore */
4513        if (sw_status[yaddr] != xaddr)
4514        {
4515                /* "open" the old switch, "close" the new one, save the new */
4516                kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4517                sw_status[yaddr] = xaddr;
4518                kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4519        }
4520}
4521
4522/*
4523 * During initialisation, we need to reset the analog switch.  We
4524 * also preset the switch to map the 4 connectors on the card to the
4525 * *user's* (see above description of kodicom4400r_muxsel) channels
4526 * 0 through 3
4527 */
4528static void kodicom4400r_init(struct bttv *btv)
4529{
4530        char *sw_status = (char *)(&btv->mbox_we);
4531        int ix;
4532
4533        gpio_inout(0x0003ff, 0x0003ff);
4534        gpio_write(1 << 9);     /* reset MUX */
4535        gpio_write(0);
4536        /* Preset camera 0 to the 4 controllers */
4537        for (ix = 0; ix < 4; ix++) {
4538                sw_status[ix] = ix;
4539                kodicom4400r_write(btv, ix, ix, 1);
4540        }
4541        /*
4542         * Since this is the "master", we need to set up the
4543         * other three controller chips' pointers to this structure
4544         * for later use in the muxsel routine.
4545         */
4546        if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4547            return;
4548        master[btv->c.nr-1] = btv;
4549        master[btv->c.nr]   = btv;
4550        master[btv->c.nr+1] = btv;
4551        master[btv->c.nr+2] = btv;
4552}
4553
4554/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4555 * video multiplexers to provide up to 16 video inputs. These
4556 * multiplexers are controlled by the lower 8 GPIO pins of the
4557 * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4558
4559 * xxx0 is pin xxx of multiplexer U5,
4560 * yyy1 is pin yyy of multiplexer U2
4561 */
4562#define ENA0    0x01
4563#define ENB0    0x02
4564#define ENA1    0x04
4565#define ENB1    0x08
4566
4567#define IN10    0x10
4568#define IN00    0x20
4569#define IN11    0x40
4570#define IN01    0x80
4571
4572static void xguard_muxsel(struct bttv *btv, unsigned int input)
4573{
4574        static const int masks[] = {
4575                ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4576                ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4577                ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4578                ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4579        };
4580        gpio_write(masks[input%16]);
4581}
4582static void picolo_tetra_init(struct bttv *btv)
4583{
4584        /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4585        btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4586        btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4587}
4588static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4589{
4590
4591        dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4592        /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4593        /*GPIO[20]&GPIO[21] used to choose the right input*/
4594        btwrite (input<<20,BT848_GPIO_DATA);
4595
4596}
4597
4598/*
4599 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4600 *
4601 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4602 * swichers to provide 16 channels to MUX0. The TDA8540's have
4603 * 4 independent outputs and as such the IVC120G also has the
4604 * optional "Monitor Out" bus. This allows the card to be looking
4605 * at one input while the monitor is looking at another.
4606 *
4607 * Since I've couldn't be bothered figuring out how to add an
4608 * independent muxsel for the monitor bus, I've just set it to
4609 * whatever the card is looking at.
4610 *
4611 *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4612 *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4613 *
4614 *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4615 *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4616 *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4617 *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4618 *
4619 */
4620
4621/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4622#define I2C_TDA8540        0x90
4623#define I2C_TDA8540_ALT1   0x92
4624#define I2C_TDA8540_ALT2   0x94
4625#define I2C_TDA8540_ALT3   0x96
4626#define I2C_TDA8540_ALT4   0x98
4627#define I2C_TDA8540_ALT5   0x9a
4628#define I2C_TDA8540_ALT6   0x9c
4629
4630static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4631{
4632        /* Simple maths */
4633        int key = input % 4;
4634        int matrix = input / 4;
4635
4636        dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4637                btv->c.nr, input, matrix, key);
4638
4639        /* Handles the input selection on the TDA8540's */
4640        bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4641                      ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4642        bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4643                      ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4644        bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4645                      ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4646        bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4647                      ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4648
4649        /* Handles the output enables on the TDA8540's */
4650        bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4651                      ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4652        bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4653                      ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4654        bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4655                      ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4656        bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4657                      ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4658
4659        /* 878's MUX0 is already selected for input via muxsel values */
4660}
4661
4662
4663/* PXC200 muxsel helper
4664 * luke@syseng.anu.edu.au
4665 * another transplant
4666 * from Alessandro Rubini (rubini@linux.it)
4667 *
4668 * There are 4 kinds of cards:
4669 * PXC200L which is bt848
4670 * PXC200F which is bt848 with PIC controlling mux
4671 * PXC200AL which is bt878
4672 * PXC200AF which is bt878 with PIC controlling mux
4673 */
4674#define PX_CFG_PXC200F 0x01
4675#define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4676#define PX_I2C_PIC       0x0f
4677#define PX_PXC200A_CARDID 0x200a1295
4678#define PX_I2C_CMD_CFG   0x00
4679
4680static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4681{
4682        int rc;
4683        long mux;
4684        int bitmask;
4685        unsigned char buf[2];
4686
4687        /* Read PIC config to determine if this is a PXC200F */
4688        /* PX_I2C_CMD_CFG*/
4689        buf[0]=0;
4690        buf[1]=0;
4691        rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4692        if (rc) {
4693                pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4694                         btv->c.nr, rc);
4695          /* not PXC ? do nothing */
4696                return;
4697        }
4698
4699        rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4700        if (!(rc & PX_CFG_PXC200F)) {
4701                pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4702                         btv->c.nr, rc);
4703                return;
4704        }
4705
4706
4707        /* The multiplexer in the 200F is handled by the GPIO port */
4708        /* get correct mapping between inputs  */
4709        /*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4710        /* ** not needed!?   */
4711        mux = input;
4712
4713        /* make sure output pins are enabled */
4714        /* bitmask=0x30f; */
4715        bitmask=0x302;
4716        /* check whether we have a PXC200A */
4717        if (btv->cardid == PX_PXC200A_CARDID)  {
4718           bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4719           bitmask |= 7<<4; /* the DAC */
4720        }
4721        btwrite(bitmask, BT848_GPIO_OUT_EN);
4722
4723        bitmask = btread(BT848_GPIO_DATA);
4724        if (btv->cardid == PX_PXC200A_CARDID)
4725          bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4726        else /* older device */
4727          bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4728        btwrite(bitmask,BT848_GPIO_DATA);
4729
4730        /*
4731         * Was "to be safe, set the bt848 to input 0"
4732         * Actually, since it's ok at load time, better not messing
4733         * with these bits (on PXC200AF you need to set mux 2 here)
4734         *
4735         * needed because bttv-driver sets mux before calling this function
4736         */
4737        if (btv->cardid == PX_PXC200A_CARDID)
4738          btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4739        else /* older device */
4740          btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4741
4742        pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4743}
4744
4745static void phytec_muxsel(struct bttv *btv, unsigned int input)
4746{
4747        unsigned int mux = input % 4;
4748
4749        if (input == btv->svhs)
4750                mux = 0;
4751
4752        gpio_bits(0x3, mux);
4753}
4754
4755/*
4756 * GeoVision GV-800(S) functions
4757 * Bruno Christo <bchristo@inf.ufsm.br>
4758*/
4759
4760/* This is a function to control the analog switch, which determines which
4761 * camera is routed to which controller.  The switch comprises an X-address
4762 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4763 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4764 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4765 * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4766 * specified address. There is also a chip select (gpio bit 16).
4767 * The idea is to set the address and chip select together, bring
4768 * STROBE high, write the data, and finally bring STROBE back to low.
4769 */
4770static void gv800s_write(struct bttv *btv,
4771                         unsigned char xaddr,
4772                         unsigned char yaddr,
4773                         unsigned char data) {
4774        /* On the "master" 878A:
4775        * GPIO bits 0-9 are used for the analog switch:
4776        *   00 - 03:    camera selector
4777        *   04 - 06:    878A (controller) selector
4778        *   16:         cselect
4779        *   17:         strobe
4780        *   18:         data (1->on, 0->off)
4781        *   19:         reset
4782        */
4783        const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4784        const u32 CSELECT = 1<<16;
4785        const u32 STROBE = 1<<17;
4786        const u32 DATA = data<<18;
4787
4788        gpio_bits(0x1007f, ADDRESS | CSELECT);  /* write ADDRESS and CSELECT */
4789        gpio_bits(0x20000, STROBE);             /* STROBE high */
4790        gpio_bits(0x40000, DATA);               /* write DATA */
4791        gpio_bits(0x20000, ~STROBE);            /* STROBE low */
4792}
4793
4794/*
4795 * GeoVision GV-800(S) muxsel
4796 *
4797 * Each of the 4 cards (controllers) use this function.
4798 * The controller using this function selects the input through the GPIO pins
4799 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4800 *
4801 * The parameter 'input' is the requested camera number (0-4) on the controller.
4802 * The map array has the address of each input. Note that the addresses in the
4803 * array are in the sequence the original GeoVision driver uses, that is, set
4804 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4805 * the physical "camera 1" connector corresponds to controller 0 input 0,
4806 * "camera 2" corresponds to controller 1 input 0, and so on.
4807 *
4808 * After getting the input address, the function then writes the appropriate
4809 * data to the analog switch, and housekeeps the local copy of the switch
4810 * information.
4811 */
4812static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4813{
4814        struct bttv *mctlr;
4815        char *sw_status;
4816        int xaddr, yaddr;
4817        static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4818                                          { 0x1, 0x5, 0xb, 0x7 },
4819                                          { 0x2, 0x8, 0xc, 0xe },
4820                                          { 0x3, 0x9, 0xd, 0xf } };
4821        input = input%4;
4822        mctlr = master[btv->c.nr];
4823        if (mctlr == NULL) {
4824                /* do nothing until the "master" is detected */
4825                return;
4826        }
4827        yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4828        sw_status = (char *)(&mctlr->mbox_we);
4829        xaddr = map[yaddr][input] & 0xf;
4830
4831        /* Check if the controller/camera pair has changed, ignore otherwise */
4832        if (sw_status[yaddr] != xaddr) {
4833                /* disable the old switch, enable the new one and save status */
4834                gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4835                sw_status[yaddr] = xaddr;
4836                gv800s_write(mctlr, xaddr, yaddr, 1);
4837        }
4838}
4839
4840/* GeoVision GV-800(S) "master" chip init */
4841static void gv800s_init(struct bttv *btv)
4842{
4843        char *sw_status = (char *)(&btv->mbox_we);
4844        int ix;
4845
4846        gpio_inout(0xf107f, 0xf107f);
4847        gpio_write(1<<19); /* reset the analog MUX */
4848        gpio_write(0);
4849
4850        /* Preset camera 0 to the 4 controllers */
4851        for (ix = 0; ix < 4; ix++) {
4852                sw_status[ix] = ix;
4853                gv800s_write(btv, ix, ix, 1);
4854        }
4855
4856        /* Inputs on the "master" controller need this brightness fix */
4857        bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4858
4859        if (btv->c.nr > BTTV_MAX-4)
4860                return;
4861        /*
4862         * Store the "master" controller pointer in the master
4863         * array for later use in the muxsel function.
4864         */
4865        master[btv->c.nr]   = btv;
4866        master[btv->c.nr+1] = btv;
4867        master[btv->c.nr+2] = btv;
4868        master[btv->c.nr+3] = btv;
4869}
4870
4871/* ----------------------------------------------------------------------- */
4872/* motherboard chipset specific stuff                                      */
4873
4874void __init bttv_check_chipset(void)
4875{
4876        int pcipci_fail = 0;
4877        struct pci_dev *dev = NULL;
4878
4879        if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))       /* should check if target is AGP */
4880                pcipci_fail = 1;
4881        if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4882                triton1 = 1;
4883        if (pci_pci_problems & PCIPCI_VSFX)
4884                vsfx = 1;
4885#ifdef PCIPCI_ALIMAGIK
4886        if (pci_pci_problems & PCIPCI_ALIMAGIK)
4887                latency = 0x0A;
4888#endif
4889
4890
4891        /* print warnings about any quirks found */
4892        if (triton1)
4893                pr_info("Host bridge needs ETBF enabled\n");
4894        if (vsfx)
4895                pr_info("Host bridge needs VSFX enabled\n");
4896        if (pcipci_fail) {
4897                pr_info("bttv and your chipset may not work together\n");
4898                if (!no_overlay) {
4899                        pr_info("overlay will be disabled\n");
4900                        no_overlay = 1;
4901                } else {
4902                        pr_info("overlay forced. Use this option at your own risk.\n");
4903                }
4904        }
4905        if (UNSET != latency)
4906                pr_info("pci latency fixup [%d]\n", latency);
4907        while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4908                                      PCI_DEVICE_ID_INTEL_82441, dev))) {
4909                unsigned char b;
4910                pci_read_config_byte(dev, 0x53, &b);
4911                if (bttv_debug)
4912                        pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4913                                b);
4914        }
4915}
4916
4917int __devinit bttv_handle_chipset(struct bttv *btv)
4918{
4919        unsigned char command;
4920
4921        if (!triton1 && !vsfx && UNSET == latency)
4922                return 0;
4923
4924        if (bttv_verbose) {
4925                if (triton1)
4926                        pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4927                                btv->c.nr);
4928                if (vsfx && btv->id >= 878)
4929                        pr_info("%d: enabling VSFX\n", btv->c.nr);
4930                if (UNSET != latency)
4931                        pr_info("%d: setting pci timer to %d\n",
4932                                btv->c.nr, latency);
4933        }
4934
4935        if (btv->id < 878) {
4936                /* bt848 (mis)uses a bit in the irq mask for etbf */
4937                if (triton1)
4938                        btv->triton1 = BT848_INT_ETBF;
4939        } else {
4940                /* bt878 has a bit in the pci config space for it */
4941                pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4942                if (triton1)
4943                        command |= BT878_EN_TBFX;
4944                if (vsfx)
4945                        command |= BT878_EN_VSFX;
4946                pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4947        }
4948        if (UNSET != latency)
4949                pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4950        return 0;
4951}
4952
4953
4954/*
4955 * Local variables:
4956 * c-basic-offset: 8
4957 * End:
4958 */
4959
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.