linux/drivers/net/phy/Kconfig
<<
>>
Prefs
   1#
   2# PHY Layer Configuration
   3#
   4
   5menuconfig PHYLIB
   6        tristate "PHY Device support and infrastructure"
   7        depends on !S390
   8        depends on NETDEVICES
   9        help
  10          Ethernet controllers are usually attached to PHY
  11          devices.  This option provides infrastructure for
  12          managing PHY devices.
  13
  14if PHYLIB
  15
  16comment "MII PHY device drivers"
  17
  18config MARVELL_PHY
  19        tristate "Drivers for Marvell PHYs"
  20        ---help---
  21          Currently has a driver for the 88E1011S
  22        
  23config DAVICOM_PHY
  24        tristate "Drivers for Davicom PHYs"
  25        ---help---
  26          Currently supports dm9161e and dm9131
  27
  28config QSEMI_PHY
  29        tristate "Drivers for Quality Semiconductor PHYs"
  30        ---help---
  31          Currently supports the qs6612
  32
  33config LXT_PHY
  34        tristate "Drivers for the Intel LXT PHYs"
  35        ---help---
  36          Currently supports the lxt970, lxt971
  37
  38config CICADA_PHY
  39        tristate "Drivers for the Cicada PHYs"
  40        ---help---
  41          Currently supports the cis8204
  42
  43config VITESSE_PHY
  44        tristate "Drivers for the Vitesse PHYs"
  45        ---help---
  46          Currently supports the vsc8244
  47
  48config SMSC_PHY
  49        tristate "Drivers for SMSC PHYs"
  50        ---help---
  51          Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  52
  53config BROADCOM_PHY
  54        tristate "Drivers for Broadcom PHYs"
  55        ---help---
  56          Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
  57          and BCM5482 PHYs.
  58
  59config BCM63XX_PHY
  60        tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  61        depends on BCM63XX
  62        ---help---
  63          Currently supports the 6348 and 6358 PHYs.
  64
  65config ICPLUS_PHY
  66        tristate "Drivers for ICPlus PHYs"
  67        ---help---
  68          Currently supports the IP175C and IP1001 PHYs.
  69
  70config REALTEK_PHY
  71        tristate "Drivers for Realtek PHYs"
  72        ---help---
  73          Supports the Realtek 821x PHY.
  74
  75config NATIONAL_PHY
  76        tristate "Drivers for National Semiconductor PHYs"
  77        ---help---
  78          Currently supports the DP83865 PHY.
  79
  80config STE10XP
  81        tristate "Driver for STMicroelectronics STe10Xp PHYs"
  82        ---help---
  83          This is the driver for the STe100p and STe101p PHYs.
  84
  85config LSI_ET1011C_PHY
  86        tristate "Driver for LSI ET1011C PHY"
  87        ---help---
  88          Supports the LSI ET1011C PHY.
  89
  90config MICREL_PHY
  91        tristate "Driver for Micrel PHYs"
  92        ---help---
  93          Supports the KSZ9021, VSC8201, KS8001 PHYs.
  94
  95config FIXED_PHY
  96        bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
  97        depends on PHYLIB=y
  98        ---help---
  99          Adds the platform "fixed" MDIO Bus to cover the boards that use
 100          PHYs that are not connected to the real MDIO bus.
 101
 102          Currently tested with mpc866ads and mpc8349e-mitx.
 103
 104config MDIO_BITBANG
 105        tristate "Support for bitbanged MDIO buses"
 106        help
 107          This module implements the MDIO bus protocol in software,
 108          for use by low level drivers that export the ability to
 109          drive the relevant pins.
 110
 111          If in doubt, say N.
 112
 113config MDIO_GPIO
 114        tristate "Support for GPIO lib-based bitbanged MDIO buses"
 115        depends on MDIO_BITBANG && GENERIC_GPIO
 116        ---help---
 117          Supports GPIO lib-based MDIO busses.
 118
 119          To compile this driver as a module, choose M here: the module
 120          will be called mdio-gpio.
 121
 122config MDIO_OCTEON
 123        tristate "Support for MDIO buses on Octeon SOCs"
 124        depends on  CPU_CAVIUM_OCTEON
 125        default y
 126        help
 127
 128          This module provides a driver for the Octeon MDIO busses.
 129          It is required by the Octeon Ethernet device drivers.
 130
 131          If in doubt, say Y.
 132
 133endif # PHYLIB
 134
 135config MICREL_KS8995MA
 136        tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 137        depends on SPI
 138
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.