1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_V4L2 8 default y 9 ---help--- 10 Say Y here to enable selecting AM/FM radio adapters. 11 12if RADIO_ADAPTERS && VIDEO_V4L2 13 14config RADIO_SI470X 15 bool "Silicon Labs Si470x FM Radio Receiver support" 16 depends on VIDEO_V4L2 17 18source "drivers/media/radio/si470x/Kconfig" 19 20config USB_MR800 21 tristate "AverMedia MR 800 USB FM radio support" 22 depends on USB && VIDEO_V4L2 23 ---help--- 24 Say Y here if you want to connect this type of radio to your 25 computer's USB port. Note that the audio is not digital, and 26 you must connect the line out connector to a sound card or a 27 set of speakers. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-mr800. 31 32config USB_DSBR 33 tristate "D-Link/GemTek USB FM radio support" 34 depends on USB && VIDEO_V4L2 35 ---help--- 36 Say Y here if you want to connect this type of radio to your 37 computer's USB port. Note that the audio is not digital, and 38 you must connect the line out connector to a sound card or a 39 set of speakers. 40 41 To compile this driver as a module, choose M here: the 42 module will be called dsbr100. 43 44config RADIO_MAXIRADIO 45 tristate "Guillemot MAXI Radio FM 2000 radio" 46 depends on VIDEO_V4L2 && PCI 47 ---help--- 48 Choose Y here if you have this radio card. This card may also be 49 found as Gemtek PCI FM. 50 51 In order to control your radio card, you will need to use programs 52 that are compatible with the Video For Linux API. Information on 53 this API and pointers to "v4l" programs may be found at 54 <file:Documentation/video4linux/API.html>. 55 56 To compile this driver as a module, choose M here: the 57 module will be called radio-maxiradio. 58 59 60config I2C_SI4713 61 tristate "I2C driver for Silicon Labs Si4713 device" 62 depends on I2C && VIDEO_V4L2 63 ---help--- 64 Say Y here if you want support to Si4713 I2C device. 65 This device driver supports only i2c bus. 66 67 To compile this driver as a module, choose M here: the 68 module will be called si4713. 69 70config RADIO_SI4713 71 tristate "Silicon Labs Si4713 FM Radio Transmitter support" 72 depends on I2C && VIDEO_V4L2 73 select I2C_SI4713 74 ---help--- 75 Say Y here if you want support to Si4713 FM Radio Transmitter. 76 This device can transmit audio through FM. It can transmit 77 RDS and RBDS signals as well. This module is the v4l2 radio 78 interface for the i2c driver of this device. 79 80 To compile this driver as a module, choose M here: the 81 module will be called radio-si4713. 82 83config RADIO_TEA5764 84 tristate "TEA5764 I2C FM radio support" 85 depends on I2C && VIDEO_V4L2 86 ---help--- 87 Say Y here if you want to use the TEA5764 FM chip found in 88 EZX phones. This FM chip is present in EZX phones from Motorola, 89 connected to internal pxa I2C bus. 90 91 To compile this driver as a module, choose M here: the 92 module will be called radio-tea5764. 93 94config RADIO_TEA5764_XTAL 95 bool "TEA5764 crystal reference" 96 depends on RADIO_TEA5764=y 97 default y 98 help 99 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 100 here if TEA5764 reference frequency is connected in FREQIN. 101 102config RADIO_SAA7706H 103 tristate "SAA7706H Car Radio DSP" 104 depends on I2C && VIDEO_V4L2 105 ---help--- 106 Say Y here if you want to use the SAA7706H Car radio Digital 107 Signal Processor, found for instance on the Russellville development 108 board. On the russellville the device is connected to internal 109 timberdale I2C bus. 110 111 To compile this driver as a module, choose M here: the 112 module will be called SAA7706H. 113 114config RADIO_TEF6862 115 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" 116 depends on I2C && VIDEO_V4L2 117 ---help--- 118 Say Y here if you want to use the TEF6862 Car Radio Enhanced 119 Selectivity Tuner, found for instance on the Russellville development 120 board. On the russellville the device is connected to internal 121 timberdale I2C bus. 122 123 To compile this driver as a module, choose M here: the 124 module will be called TEF6862. 125 126config RADIO_TIMBERDALE 127 tristate "Enable the Timberdale radio driver" 128 depends on MFD_TIMBERDALE && VIDEO_V4L2 129 depends on I2C # for RADIO_SAA7706H 130 select RADIO_TEF6862 131 select RADIO_SAA7706H 132 ---help--- 133 This is a kind of umbrella driver for the Radio Tuner and DSP 134 found behind the Timberdale FPGA on the Russellville board. 135 Enabling this driver will automatically select the DSP and tuner. 136 137config RADIO_WL1273 138 tristate "Texas Instruments WL1273 I2C FM Radio" 139 depends on I2C && VIDEO_V4L2 140 select MFD_CORE 141 select MFD_WL1273_CORE 142 select FW_LOADER 143 ---help--- 144 Choose Y here if you have this FM radio chip. 145 146 In order to control your radio card, you will need to use programs 147 that are compatible with the Video For Linux 2 API. Information on 148 this API and pointers to "v4l2" programs may be found at 149 <file:Documentation/video4linux/API.html>. 150 151 To compile this driver as a module, choose M here: the 152 module will be called radio-wl1273. 153 154# TI's ST based wl128x FM radio 155source "drivers/media/radio/wl128x/Kconfig" 156 157# 158# ISA drivers configuration 159# 160 161menuconfig V4L_RADIO_ISA_DRIVERS 162 bool "ISA radio devices" 163 depends on ISA 164 default n 165 ---help--- 166 Say Y here to enable support for these ISA drivers. 167 168if V4L_RADIO_ISA_DRIVERS 169 170config RADIO_CADET 171 tristate "ADS Cadet AM/FM Tuner" 172 depends on ISA && VIDEO_V4L2 173 ---help--- 174 Choose Y here if you have one of these AM/FM radio cards, and then 175 fill in the port address below. 176 177 In order to control your radio card, you will need to use programs 178 that are compatible with the Video For Linux API. Information on 179 this API and pointers to "v4l" programs may be found at 180 <file:Documentation/video4linux/API.html>. 181 182 Further documentation on this driver can be found on the WWW at 183 <http://linux.blackhawke.net/cadet/>. 184 185 To compile this driver as a module, choose M here: the 186 module will be called radio-cadet. 187 188config RADIO_RTRACK 189 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 190 depends on ISA && VIDEO_V4L2 191 ---help--- 192 Choose Y here if you have one of these FM radio cards, and then fill 193 in the port address below. 194 195 Note that newer AIMSlab RadioTrack cards have a different chipset 196 and are not supported by this driver. For these cards, use the 197 RadioTrack II driver below. 198 199 If you have a GemTeks combined (PnP) sound- and radio card you must 200 use this driver as a module and setup the card with isapnptools. 201 You must also pass the module a suitable io parameter, 0x248 has 202 been reported to be used by these cards. 203 204 In order to control your radio card, you will need to use programs 205 that are compatible with the Video For Linux API. Information on 206 this API and pointers to "v4l" programs may be found at 207 <file:Documentation/video4linux/API.html>. More information is 208 contained in the file 209 <file:Documentation/video4linux/radiotrack.txt>. 210 211 To compile this driver as a module, choose M here: the 212 module will be called radio-aimslab. 213 214config RADIO_RTRACK_PORT 215 hex "RadioTrack i/o port (0x20f or 0x30f)" 216 depends on RADIO_RTRACK=y 217 default "20f" 218 help 219 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 220 haven't changed the jumper setting on the card. 221 222config RADIO_RTRACK2 223 tristate "AIMSlab RadioTrack II support" 224 depends on ISA && VIDEO_V4L2 225 ---help--- 226 Choose Y here if you have this FM radio card, and then fill in the 227 port address below. 228 229 In order to control your radio card, you will need to use programs 230 that are compatible with the Video For Linux API. Information on 231 this API and pointers to "v4l" programs may be found at 232 <file:Documentation/video4linux/API.html>. 233 234 To compile this driver as a module, choose M here: the 235 module will be called radio-rtrack2. 236 237config RADIO_RTRACK2_PORT 238 hex "RadioTrack II i/o port (0x20c or 0x30c)" 239 depends on RADIO_RTRACK2=y 240 default "30c" 241 help 242 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 243 haven't changed the jumper setting on the card. 244 245config RADIO_AZTECH 246 tristate "Aztech/Packard Bell Radio" 247 depends on ISA && VIDEO_V4L2 248 ---help--- 249 Choose Y here if you have one of these FM radio cards, and then fill 250 in the port address below. 251 252 In order to control your radio card, you will need to use programs 253 that are compatible with the Video For Linux API. Information on 254 this API and pointers to "v4l" programs may be found at 255 <file:Documentation/video4linux/API.html>. 256 257 To compile this driver as a module, choose M here: the 258 module will be called radio-aztech. 259 260config RADIO_AZTECH_PORT 261 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 262 depends on RADIO_AZTECH=y 263 default "350" 264 help 265 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 266 haven't changed the setting of jumper JP3 on the card. Removing the 267 jumper sets the card to 0x358. 268 269config RADIO_GEMTEK 270 tristate "GemTek Radio card (or compatible) support" 271 depends on ISA && VIDEO_V4L2 272 ---help--- 273 Choose Y here if you have this FM radio card, and then fill in the 274 I/O port address and settings below. The following cards either have 275 GemTek Radio tuner or are rebranded GemTek Radio cards: 276 277 - Sound Vision 16 Gold with FM Radio 278 - Typhoon Radio card (some models) 279 - Hama Radio card 280 281 In order to control your radio card, you will need to use programs 282 that are compatible with the Video For Linux API. Information on 283 this API and pointers to "v4l" programs may be found at 284 <file:Documentation/video4linux/API.html>. 285 286 To compile this driver as a module, choose M here: the 287 module will be called radio-gemtek. 288 289config RADIO_GEMTEK_PORT 290 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" 291 depends on RADIO_GEMTEK=y 292 default "34c" 293 help 294 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is 295 0x34c, if you haven't changed the jumper setting on the card. On 296 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 297 port is 0x20c, 0x248 or 0x28c. 298 If automatic I/O port probing is enabled this port will be used only 299 in case of automatic probing failure, ie. as a fallback. 300 301config RADIO_GEMTEK_PROBE 302 bool "Automatic I/O port probing" 303 depends on RADIO_GEMTEK=y 304 default y 305 help 306 Say Y here to enable automatic probing for GemTek Radio card. The 307 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 308 0x28c. 309 310config RADIO_MIROPCM20 311 tristate "miroSOUND PCM20 radio" 312 depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND 313 select SND_ISA 314 select SND_MIRO 315 ---help--- 316 Choose Y here if you have this FM radio card. You also need to enable 317 the ALSA sound system. This choice automatically selects the ALSA 318 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this 319 is required for the radio-miropcm20. 320 321 In order to control your radio card, you will need to use programs 322 that are compatible with the Video For Linux API. Information on 323 this API and pointers to "v4l" programs may be found at 324 <file:Documentation/video4linux/API.html>. 325 326 To compile this driver as a module, choose M here: the 327 module will be called radio-miropcm20. 328 329config RADIO_SF16FMI 330 tristate "SF16-FMI/SF16-FMP Radio" 331 depends on ISA && VIDEO_V4L2 332 ---help--- 333 Choose Y here if you have one of these FM radio cards. 334 335 In order to control your radio card, you will need to use programs 336 that are compatible with the Video For Linux API. Information on 337 this API and pointers to "v4l" programs may be found at 338 <file:Documentation/video4linux/API.html>. 339 340 To compile this driver as a module, choose M here: the 341 module will be called radio-sf16fmi. 342 343config RADIO_SF16FMR2 344 tristate "SF16FMR2 Radio" 345 depends on ISA && VIDEO_V4L2 && SND 346 ---help--- 347 Choose Y here if you have one of these FM radio cards. 348 349 In order to control your radio card, you will need to use programs 350 that are compatible with the Video For Linux API. Information on 351 this API and pointers to "v4l" programs may be found on the WWW at 352 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. 353 354 To compile this driver as a module, choose M here: the 355 module will be called radio-sf16fmr2. 356 357config RADIO_TERRATEC 358 tristate "TerraTec ActiveRadio ISA Standalone" 359 depends on ISA && VIDEO_V4L2 360 ---help--- 361 Choose Y here if you have this FM radio card, and then fill in the 362 port address below. (TODO) 363 364 Note: This driver is in its early stages. Right now volume and 365 frequency control and muting works at least for me, but 366 unfortunately I have not found anybody who wants to use this card 367 with Linux. So if it is this what YOU are trying to do right now, 368 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. 369 370 In order to control your radio card, you will need to use programs 371 that are compatible with the Video For Linux API. Information on 372 this API and pointers to "v4l" programs may be found at 373 <file:Documentation/video4linux/API.html>. 374 375 To compile this driver as a module, choose M here: the 376 module will be called radio-terratec. 377 378config RADIO_TERRATEC_PORT 379 hex "Terratec i/o port (normally 0x590)" 380 depends on RADIO_TERRATEC=y 381 default "590" 382 help 383 Fill in the I/O port of your TerraTec FM radio card. If unsure, go 384 with the default. 385 386config RADIO_TRUST 387 tristate "Trust FM radio card" 388 depends on ISA && VIDEO_V4L2 389 help 390 This is a driver for the Trust FM radio cards. Say Y if you have 391 such a card and want to use it under Linux. 392 393 To compile this driver as a module, choose M here: the 394 module will be called radio-trust. 395 396config RADIO_TRUST_PORT 397 hex "Trust i/o port (usually 0x350 or 0x358)" 398 depends on RADIO_TRUST=y 399 default "350" 400 help 401 Enter the I/O port of your Trust FM radio card. If unsure, try the 402 values "0x350" or "0x358". 403 404config RADIO_TYPHOON 405 tristate "Typhoon Radio (a.k.a. EcoRadio)" 406 depends on ISA && VIDEO_V4L2 407 ---help--- 408 Choose Y here if you have one of these FM radio cards, and then fill 409 in the port address and the frequency used for muting below. 410 411 In order to control your radio card, you will need to use programs 412 that are compatible with the Video For Linux API. Information on 413 this API and pointers to "v4l" programs may be found at 414 <file:Documentation/video4linux/API.html>. 415 416 To compile this driver as a module, choose M here: the 417 module will be called radio-typhoon. 418 419config RADIO_TYPHOON_PORT 420 hex "Typhoon I/O port (0x316 or 0x336)" 421 depends on RADIO_TYPHOON=y 422 default "316" 423 help 424 Enter the I/O port of your Typhoon or EcoRadio radio card. 425 426config RADIO_TYPHOON_MUTEFREQ 427 int "Typhoon frequency set when muting the device (kHz)" 428 depends on RADIO_TYPHOON=y 429 default "87500" 430 help 431 Enter the frequency used for muting the radio. The device is never 432 completely silent. If the volume is just turned down, you can still 433 hear silent voices and music. For that reason, the frequency of the 434 radio device is set to the frequency you can enter here whenever 435 the device is muted. There should be no local radio station at that 436 frequency. 437 438config RADIO_ZOLTRIX 439 tristate "Zoltrix Radio" 440 depends on ISA && VIDEO_V4L2 441 ---help--- 442 Choose Y here if you have one of these FM radio cards, and then fill 443 in the port address below. 444 445 In order to control your radio card, you will need to use programs 446 that are compatible with the Video For Linux API. Information on 447 this API and pointers to "v4l" programs may be found at 448 <file:Documentation/video4linux/API.html>. 449 450 To compile this driver as a module, choose M here: the 451 module will be called radio-zoltrix. 452 453config RADIO_ZOLTRIX_PORT 454 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 455 depends on RADIO_ZOLTRIX=y 456 default "20c" 457 help 458 Enter the I/O port of your Zoltrix radio card. 459 460endif # V4L_RADIO_ISA_DRIVERS 461 462endif # RADIO_ADAPTERS 463