linux/arch/arm/mach-at91/Kconfig
<<
>>
Prefs
   1if ARCH_AT91
   2
   3config HAVE_AT91_DATAFLASH_CARD
   4        bool
   5
   6config HAVE_AT91_DBGU0
   7        bool
   8
   9config HAVE_AT91_DBGU1
  10        bool
  11
  12config HAVE_AT91_USART3
  13        bool
  14
  15config HAVE_AT91_USART4
  16        bool
  17
  18config HAVE_AT91_USART5
  19        bool
  20
  21config AT91_SAM9_ALT_RESET
  22        bool
  23
  24config AT91_SAM9G45_RESET
  25        bool
  26
  27menu "Atmel AT91 System-on-Chip"
  28
  29choice
  30        prompt "Atmel AT91 Processor"
  31
  32config ARCH_AT91RM9200
  33        bool "AT91RM9200"
  34        select CPU_ARM920T
  35        select GENERIC_CLOCKEVENTS
  36        select HAVE_AT91_DBGU0
  37        select HAVE_AT91_USART3
  38
  39config ARCH_AT91SAM9260
  40        bool "AT91SAM9260 or AT91SAM9XE"
  41        select CPU_ARM926T
  42        select GENERIC_CLOCKEVENTS
  43        select HAVE_AT91_DBGU0
  44        select HAVE_AT91_USART3
  45        select HAVE_AT91_USART4
  46        select HAVE_AT91_USART5
  47        select HAVE_NET_MACB
  48        select AT91_SAM9_ALT_RESET
  49
  50config ARCH_AT91SAM9261
  51        bool "AT91SAM9261"
  52        select CPU_ARM926T
  53        select GENERIC_CLOCKEVENTS
  54        select HAVE_FB_ATMEL
  55        select HAVE_AT91_DBGU0
  56        select AT91_SAM9_ALT_RESET
  57
  58config ARCH_AT91SAM9G10
  59        bool "AT91SAM9G10"
  60        select CPU_ARM926T
  61        select GENERIC_CLOCKEVENTS
  62        select HAVE_AT91_DBGU0
  63        select HAVE_FB_ATMEL
  64        select AT91_SAM9_ALT_RESET
  65
  66config ARCH_AT91SAM9263
  67        bool "AT91SAM9263"
  68        select CPU_ARM926T
  69        select GENERIC_CLOCKEVENTS
  70        select HAVE_FB_ATMEL
  71        select HAVE_NET_MACB
  72        select HAVE_AT91_DBGU1
  73        select AT91_SAM9_ALT_RESET
  74
  75config ARCH_AT91SAM9RL
  76        bool "AT91SAM9RL"
  77        select CPU_ARM926T
  78        select GENERIC_CLOCKEVENTS
  79        select HAVE_AT91_USART3
  80        select HAVE_FB_ATMEL
  81        select HAVE_AT91_DBGU0
  82        select AT91_SAM9_ALT_RESET
  83
  84config ARCH_AT91SAM9G20
  85        bool "AT91SAM9G20"
  86        select CPU_ARM926T
  87        select GENERIC_CLOCKEVENTS
  88        select HAVE_AT91_DBGU0
  89        select HAVE_AT91_USART3
  90        select HAVE_AT91_USART4
  91        select HAVE_AT91_USART5
  92        select HAVE_NET_MACB
  93        select AT91_SAM9_ALT_RESET
  94
  95config ARCH_AT91SAM9G45
  96        bool "AT91SAM9G45"
  97        select CPU_ARM926T
  98        select GENERIC_CLOCKEVENTS
  99        select HAVE_AT91_USART3
 100        select HAVE_FB_ATMEL
 101        select HAVE_NET_MACB
 102        select HAVE_AT91_DBGU1
 103        select AT91_SAM9G45_RESET
 104
 105config ARCH_AT91CAP9
 106        bool "AT91CAP9"
 107        select CPU_ARM926T
 108        select GENERIC_CLOCKEVENTS
 109        select HAVE_FB_ATMEL
 110        select HAVE_NET_MACB
 111        select HAVE_AT91_DBGU1
 112        select AT91_SAM9G45_RESET
 113
 114config ARCH_AT91X40
 115        bool "AT91x40"
 116        select ARCH_USES_GETTIMEOFFSET
 117
 118endchoice
 119
 120config AT91_PMC_UNIT
 121        bool
 122        default !ARCH_AT91X40
 123
 124# ----------------------------------------------------------
 125
 126if ARCH_AT91RM9200
 127
 128comment "AT91RM9200 Board Type"
 129
 130config MACH_ONEARM
 131        bool "Ajeco 1ARM Single Board Computer"
 132        help
 133          Select this if you are using Ajeco's 1ARM Single Board Computer.
 134          <http://www.ajeco.fi/>
 135
 136config ARCH_AT91RM9200DK
 137        bool "Atmel AT91RM9200-DK Development board"
 138        select HAVE_AT91_DATAFLASH_CARD
 139        help
 140          Select this if you are using Atmel's AT91RM9200-DK Development board.
 141          (Discontinued)
 142
 143config MACH_AT91RM9200EK
 144        bool "Atmel AT91RM9200-EK Evaluation Kit"
 145        select HAVE_AT91_DATAFLASH_CARD
 146        help
 147          Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 148          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 149
 150config MACH_CSB337
 151        bool "Cogent CSB337"
 152        help
 153          Select this if you are using Cogent's CSB337 board.
 154          <http://www.cogcomp.com/csb_csb337.htm>
 155
 156config MACH_CSB637
 157        bool "Cogent CSB637"
 158        help
 159          Select this if you are using Cogent's CSB637 board.
 160          <http://www.cogcomp.com/csb_csb637.htm>
 161
 162config MACH_CARMEVA
 163        bool "Conitec ARM&EVA"
 164        help
 165          Select this if you are using Conitec's AT91RM9200-MCU-Module.
 166          <http://www.conitec.net/english/linuxboard.php>
 167
 168config MACH_ATEB9200
 169        bool "Embest ATEB9200"
 170        help
 171          Select this if you are using Embest's ATEB9200 board.
 172          <http://www.embedinfo.com/english/product/ATEB9200.asp>
 173
 174config MACH_KB9200
 175        bool "KwikByte KB920x"
 176        help
 177          Select this if you are using KwikByte's KB920x board.
 178          <http://www.kwikbyte.com/KB9202.html>
 179
 180config MACH_PICOTUX2XX
 181        bool "picotux 200"
 182        help
 183          Select this if you are using a picotux 200.
 184          <http://www.picotux.com/>
 185
 186config MACH_KAFA
 187        bool "Sperry-Sun KAFA board"
 188        help
 189          Select this if you are using Sperry-Sun's KAFA board.
 190
 191config MACH_ECBAT91
 192        bool "emQbit ECB_AT91 SBC"
 193        select HAVE_AT91_DATAFLASH_CARD
 194        help
 195          Select this if you are using emQbit's ECB_AT91 board.
 196          <http://wiki.emqbit.com/free-ecb-at91>
 197
 198config MACH_YL9200
 199        bool "ucDragon YL-9200"
 200        help
 201          Select this if you are using the ucDragon YL-9200 board.
 202
 203config MACH_CPUAT91
 204        bool "Eukrea CPUAT91"
 205        help
 206          Select this if you are using the Eukrea Electromatique's
 207          CPUAT91 board <http://www.eukrea.com/>.
 208
 209config MACH_ECO920
 210        bool "eco920"
 211        help
 212          Select this if you are using the eco920 board
 213
 214config MACH_RSI_EWS
 215        bool "RSI Embedded Webserver"
 216        depends on ARCH_AT91RM9200
 217        help
 218          Select this if you are using RSIs EWS board.
 219endif
 220
 221# ----------------------------------------------------------
 222
 223if ARCH_AT91SAM9260
 224
 225comment "AT91SAM9260 Variants"
 226
 227comment "AT91SAM9260 / AT91SAM9XE Board Type"
 228
 229config MACH_AT91SAM9260EK
 230        bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 231        select HAVE_AT91_DATAFLASH_CARD
 232        help
 233          Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 234          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 235
 236config MACH_CAM60
 237        bool "KwikByte KB9260 (CAM60) board"
 238        help
 239          Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 240          <http://www.kwikbyte.com/KB9260.html>
 241
 242config MACH_SAM9_L9260
 243        bool "Olimex SAM9-L9260 board"
 244        select HAVE_AT91_DATAFLASH_CARD
 245        help
 246          Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 247          <http://www.olimex.com/dev/sam9-L9260.html>
 248
 249config MACH_AFEB9260
 250        bool "Custom afeb9260 board v1"
 251        help
 252          Select this if you are using custom afeb9260 board based on
 253          open hardware design. Select this for revision 1 of the board.
 254          <svn://194.85.238.22/home/users/george/svn/arm9eb>
 255          <http://groups.google.com/group/arm9fpga-evolution-board>
 256
 257config MACH_USB_A9260
 258        bool "CALAO USB-A9260"
 259        help
 260          Select this if you are using a Calao Systems USB-A9260.
 261          <http://www.calao-systems.com>
 262
 263config MACH_QIL_A9260
 264        bool "CALAO QIL-A9260 board"
 265        help
 266          Select this if you are using a Calao Systems QIL-A9260 Board.
 267          <http://www.calao-systems.com>
 268
 269config MACH_CPU9260
 270        bool "Eukrea CPU9260 board"
 271        help
 272          Select this if you are using a Eukrea Electromatique's
 273          CPU9260 Board <http://www.eukrea.com/>
 274
 275config MACH_FLEXIBITY
 276        bool "Flexibity Connect board"
 277        help
 278          Select this if you are using Flexibity Connect board
 279          <http://www.flexibity.com>
 280
 281endif
 282
 283# ----------------------------------------------------------
 284
 285if ARCH_AT91SAM9261
 286
 287comment "AT91SAM9261 Board Type"
 288
 289config MACH_AT91SAM9261EK
 290        bool "Atmel AT91SAM9261-EK Evaluation Kit"
 291        select HAVE_AT91_DATAFLASH_CARD
 292        help
 293          Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 294          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
 295
 296endif
 297
 298# ----------------------------------------------------------
 299
 300if ARCH_AT91SAM9G10
 301
 302comment "AT91SAM9G10 Board Type"
 303
 304config MACH_AT91SAM9G10EK
 305        bool "Atmel AT91SAM9G10-EK Evaluation Kit"
 306        select HAVE_AT91_DATAFLASH_CARD
 307        help
 308          Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 309          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
 310
 311endif
 312
 313# ----------------------------------------------------------
 314
 315if ARCH_AT91SAM9263
 316
 317comment "AT91SAM9263 Board Type"
 318
 319config MACH_AT91SAM9263EK
 320        bool "Atmel AT91SAM9263-EK Evaluation Kit"
 321        select HAVE_AT91_DATAFLASH_CARD
 322        help
 323          Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 324          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 325
 326config MACH_USB_A9263
 327        bool "CALAO USB-A9263"
 328        help
 329          Select this if you are using a Calao Systems USB-A9263.
 330          <http://www.calao-systems.com>
 331
 332config MACH_NEOCORE926
 333        bool "Adeneo NEOCORE926"
 334        select HAVE_AT91_DATAFLASH_CARD
 335        help
 336          Select this if you are using the Adeneo Neocore 926 board.
 337
 338endif
 339
 340# ----------------------------------------------------------
 341
 342if ARCH_AT91SAM9RL
 343
 344comment "AT91SAM9RL Board Type"
 345
 346config MACH_AT91SAM9RLEK
 347        bool "Atmel AT91SAM9RL-EK Evaluation Kit"
 348        help
 349          Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 350
 351endif
 352
 353# ----------------------------------------------------------
 354
 355if ARCH_AT91SAM9G20
 356
 357comment "AT91SAM9G20 Board Type"
 358
 359config MACH_AT91SAM9G20EK
 360        bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 361        select HAVE_AT91_DATAFLASH_CARD
 362        help
 363          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 364          that embeds only one SD/MMC slot.
 365
 366config MACH_AT91SAM9G20EK_2MMC
 367        depends on MACH_AT91SAM9G20EK
 368        bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
 369        help
 370          Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 371          with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 372          onwards.
 373
 374config MACH_CPU9G20
 375        bool "Eukrea CPU9G20 board"
 376        help
 377          Select this if you are using a Eukrea Electromatique's
 378          CPU9G20 Board <http://www.eukrea.com/>
 379
 380config MACH_ACMENETUSFOXG20
 381        bool "Acme Systems srl FOX Board G20"
 382        help
 383          Select this if you are using Acme Systems
 384          FOX Board G20 <http://www.acmesystems.it>
 385
 386config MACH_PORTUXG20
 387        bool "taskit PortuxG20"
 388        help
 389          Select this if you are using taskit's PortuxG20.
 390          <http://www.taskit.de/en/>
 391
 392config MACH_STAMP9G20
 393        bool "taskit Stamp9G20 CPU module"
 394        help
 395          Select this if you are using taskit's Stamp9G20 CPU module on its
 396          evaluation board.
 397          <http://www.taskit.de/en/>
 398
 399config MACH_PCONTROL_G20
 400        bool "PControl G20 CPU module"
 401        help
 402          Select this if you are using taskit's Stamp9G20 CPU module on this
 403          carrier board, beeing the decentralized unit of a building automation
 404          system; featuring nvram, eth-switch, iso-rs485, display, io
 405
 406config MACH_GSIA18S
 407        bool "GS_IA18_S board"
 408        help
 409          This enables support for the GS_IA18_S board
 410          produced by GeoSIG Ltd company. This is an internet accelerograph.
 411          <http://www.geosig.com>
 412
 413config MACH_USB_A9G20
 414        bool "CALAO USB-A9G20"
 415        depends on ARCH_AT91SAM9G20
 416        help
 417          Select this if you are using a Calao Systems USB-A9G20.
 418          <http://www.calao-systems.com>
 419
 420endif
 421
 422if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
 423comment "AT91SAM9260/AT91SAM9G20 boards"
 424
 425config MACH_SNAPPER_9260
 426        bool "Bluewater Systems Snapper 9260/9G20 module"
 427        help
 428          Select this if you are using the Bluewater Systems Snapper 9260 or
 429          Snapper 9G20 modules.
 430          <http://www.bluewatersys.com/>
 431endif
 432
 433# ----------------------------------------------------------
 434
 435if ARCH_AT91SAM9G45
 436
 437comment "AT91SAM9G45 Board Type"
 438
 439config MACH_AT91SAM9M10G45EK
 440        bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 441        help
 442          Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 443          "ES" at the end of the name means that this board is an
 444          Engineering Sample.
 445
 446endif
 447
 448# ----------------------------------------------------------
 449
 450if ARCH_AT91CAP9
 451
 452comment "AT91CAP9 Board Type"
 453
 454config MACH_AT91CAP9ADK
 455        bool "Atmel AT91CAP9A-DK Evaluation Kit"
 456        select HAVE_AT91_DATAFLASH_CARD
 457        help
 458          Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 459          <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
 460
 461endif
 462
 463# ----------------------------------------------------------
 464
 465if ARCH_AT91X40
 466
 467comment "AT91X40 Board Type"
 468
 469config MACH_AT91EB01
 470        bool "Atmel AT91EB01 Evaluation Kit"
 471        help
 472          Select this if you are using Atmel's AT91EB01 Evaluation Kit.
 473          It is also a popular target for simulators such as GDB's
 474          ARM simulator (commonly known as the ARMulator) and the
 475          Skyeye simulator.
 476
 477endif
 478
 479# ----------------------------------------------------------
 480
 481comment "Generic Board Type"
 482
 483config MACH_AT91SAM_DT
 484        bool "Atmel AT91SAM Evaluation Kits with device-tree support"
 485        select USE_OF
 486        help
 487          Select this if you want to experiment device-tree with
 488          an Atmel Evaluation Kit.
 489
 490# ----------------------------------------------------------
 491
 492comment "AT91 Board Options"
 493
 494config MTD_AT91_DATAFLASH_CARD
 495        bool "Enable DataFlash Card support"
 496        depends on HAVE_AT91_DATAFLASH_CARD
 497        help
 498          Enable support for the DataFlash card.
 499
 500# ----------------------------------------------------------
 501
 502comment "AT91 Feature Selections"
 503
 504config AT91_PROGRAMMABLE_CLOCKS
 505        bool "Programmable Clocks"
 506        help
 507          Select this if you need to program one or more of the PCK0..PCK3
 508          programmable clock outputs.
 509
 510config AT91_SLOW_CLOCK
 511        bool "Suspend-to-RAM disables main oscillator"
 512        depends on SUSPEND
 513        help
 514          Select this if you want Suspend-to-RAM to save the most power
 515          possible (without powering off the CPU) by disabling the PLLs
 516          and main oscillator so that only the 32 KiHz clock is available.
 517
 518          When only that slow-clock is available, some peripherals lose
 519          functionality.  Many can't issue wakeup events unless faster
 520          clocks are available.  Some lose their operating state and
 521          need to be completely re-initialized.
 522
 523config AT91_TIMER_HZ
 524       int "Kernel HZ (jiffies per second)"
 525       range 32 1024
 526       depends on ARCH_AT91
 527       default "128" if ARCH_AT91RM9200
 528       default "100"
 529       help
 530          On AT91rm9200 chips where you're using a system clock derived
 531          from the 32768 Hz hardware clock, this tick rate should divide
 532          it exactly: use a power-of-two value, such as 128 or 256, to
 533          reduce timing errors caused by rounding.
 534
 535          On AT91sam926x chips, or otherwise when using a higher precision
 536          system clock (of at least several MHz), rounding is less of a
 537          problem so it can be safer to use a decimal values like 100.
 538
 539choice
 540        prompt "Select a UART for early kernel messages"
 541
 542config AT91_EARLY_DBGU0
 543        bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 544        depends on HAVE_AT91_DBGU0
 545
 546config AT91_EARLY_DBGU1
 547        bool "DBGU on 9263, 9g45 and cap9"
 548        depends on HAVE_AT91_DBGU1
 549
 550config AT91_EARLY_USART0
 551        bool "USART0"
 552
 553config AT91_EARLY_USART1
 554        bool "USART1"
 555
 556config AT91_EARLY_USART2
 557        bool "USART2"
 558        depends on ! ARCH_AT91X40
 559
 560config AT91_EARLY_USART3
 561        bool "USART3"
 562        depends on HAVE_AT91_USART3
 563
 564config AT91_EARLY_USART4
 565        bool "USART4"
 566        depends on HAVE_AT91_USART4
 567
 568config AT91_EARLY_USART5
 569        bool "USART5"
 570        depends on HAVE_AT91_USART5
 571
 572endchoice
 573
 574endmenu
 575
 576endif
 577
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.