linux/drivers/net/ethernet/realtek/Kconfig
<<
>>
Prefs
   1#
   2# Realtek device configuration
   3#
   4
   5config NET_VENDOR_REALTEK
   6        bool "Realtek devices"
   7        default y
   8        depends on PCI || (PARPORT && X86)
   9        ---help---
  10          If you have a network (Ethernet) card belonging to this class, say Y
  11          and read the Ethernet-HOWTO, available from
  12          <http://www.tldp.org/docs.html#howto>.
  13
  14          Note that the answer to this question doesn't directly affect the
  15          kernel: saying N will just cause the configurator to skip all
  16          the questions about Realtek devices. If you say Y, you will be asked for
  17          your specific card in the following questions.
  18
  19if NET_VENDOR_REALTEK
  20
  21config ATP
  22        tristate "AT-LAN-TEC/RealTek pocket adapter support"
  23        depends on PARPORT && X86
  24        select CRC32
  25        ---help---
  26          This is a network (Ethernet) device which attaches to your parallel
  27          port. Read <file:drivers/net/atp.c> as well as the Ethernet-HOWTO,
  28          available from <http://www.tldp.org/docs.html#howto>, if you
  29          want to use this.  If you intend to use this driver, you should have
  30          said N to the "Parallel printer support", because the two drivers
  31          don't like each other.
  32
  33          To compile this driver as a module, choose M here: the module
  34          will be called atp.
  35
  36config 8139CP
  37        tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
  38        depends on PCI && EXPERIMENTAL
  39        select CRC32
  40        select NET_CORE
  41        select MII
  42        ---help---
  43          This is a driver for the Fast Ethernet PCI network cards based on
  44          the RTL8139C+ chips. If you have one of those, say Y and read
  45          the Ethernet-HOWTO, available from
  46          <http://www.tldp.org/docs.html#howto>.
  47
  48          To compile this driver as a module, choose M here: the module
  49          will be called 8139cp.  This is recommended.
  50
  51config 8139TOO
  52        tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
  53        depends on PCI
  54        select CRC32
  55        select NET_CORE
  56        select MII
  57        ---help---
  58          This is a driver for the Fast Ethernet PCI network cards based on
  59          the RTL 8129/8130/8139 chips. If you have one of those, say Y and
  60          read the Ethernet-HOWTO <http://www.tldp.org/docs.html#howto>.
  61
  62          To compile this driver as a module, choose M here: the module
  63          will be called 8139too.  This is recommended.
  64
  65config 8139TOO_PIO
  66        bool "Use PIO instead of MMIO"
  67        default y
  68        depends on 8139TOO
  69        ---help---
  70          This instructs the driver to use programmed I/O ports (PIO) instead
  71          of PCI shared memory (MMIO).  This can possibly solve some problems
  72          in case your mainboard has memory consistency issues.  If unsure,
  73          say N.
  74
  75config 8139TOO_TUNE_TWISTER
  76        bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
  77        depends on 8139TOO
  78        ---help---
  79          This implements a function which might come in handy in case you
  80          are using low quality on long cabling. It is required for RealTek
  81          RTL-8139 revision K boards, and totally unused otherwise.  It tries
  82          to match the transceiver to the cable characteristics. This is
  83          experimental since hardly documented by the manufacturer.
  84          If unsure, say Y.
  85
  86config 8139TOO_8129
  87        bool "Support for older RTL-8129/8130 boards"
  88        depends on 8139TOO
  89        ---help---
  90          This enables support for the older and uncommon RTL-8129 and
  91          RTL-8130 chips, which support MII via an external transceiver,
  92          instead of an internal one.  Disabling this option will save some
  93          memory by making the code size smaller.  If unsure, say Y.
  94
  95config 8139_OLD_RX_RESET
  96        bool "Use older RX-reset method"
  97        depends on 8139TOO
  98        ---help---
  99          The 8139too driver was recently updated to contain a more rapid
 100          reset sequence, in the face of severe receive errors.  This "new"
 101          RX-reset method should be adequate for all boards.  But if you
 102          experience problems, you can enable this option to restore the
 103          old RX-reset behavior.  If unsure, say N.
 104
 105config R8169
 106        tristate "Realtek 8169 gigabit ethernet support"
 107        depends on PCI
 108        select FW_LOADER
 109        select CRC32
 110        select NET_CORE
 111        select MII
 112        ---help---
 113          Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
 114
 115          To compile this driver as a module, choose M here: the module
 116          will be called r8169.  This is recommended.
 117
 118endif # NET_VENDOR_REALTEK
 119
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.