linux/drivers/misc/Kconfig
<<
>>
Prefs
   1#
   2# Misc strange devices
   3#
   4
   5# This one has to live outside of the MISC_DEVICES conditional,
   6# because it may be selected by drivers/platform/x86/hp_accel.
   7config SENSORS_LIS3LV02D
   8        tristate
   9        depends on INPUT
  10        select INPUT_POLLDEV
  11        default n
  12
  13menuconfig MISC_DEVICES
  14        bool "Misc devices"
  15        ---help---
  16          Say Y here to get to see options for device drivers from various
  17          different categories. This option alone does not add any kernel code.
  18
  19          If you say N, all options in this submenu will be skipped and disabled.
  20
  21if MISC_DEVICES
  22
  23config AD525X_DPOT
  24        tristate "Analog Devices Digital Potentiometers"
  25        depends on (I2C || SPI) && SYSFS
  26        help
  27          If you say yes here, you get support for the Analog Devices
  28          AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
  29          AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
  30          AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
  31          AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
  32          AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
  33          AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
  34          ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173, AD5270,
  35          AD5271, AD5272, AD5274
  36          digital potentiometer chips.
  37
  38          See Documentation/misc-devices/ad525x_dpot.txt for the
  39          userspace interface.
  40
  41          This driver can also be built as a module.  If so, the module
  42          will be called ad525x_dpot.
  43
  44config AD525X_DPOT_I2C
  45        tristate "support I2C bus connection"
  46        depends on AD525X_DPOT && I2C
  47        help
  48          Say Y here if you have a digital potentiometers hooked to an I2C bus.
  49
  50          To compile this driver as a module, choose M here: the
  51          module will be called ad525x_dpot-i2c.
  52
  53config AD525X_DPOT_SPI
  54        tristate "support SPI bus connection"
  55        depends on AD525X_DPOT && SPI_MASTER
  56        help
  57          Say Y here if you have a digital potentiometers hooked to an SPI bus.
  58
  59          If unsure, say N (but it's safe to say "Y").
  60
  61          To compile this driver as a module, choose M here: the
  62          module will be called ad525x_dpot-spi.
  63
  64config ATMEL_PWM
  65        tristate "Atmel AT32/AT91 PWM support"
  66        depends on HAVE_CLK
  67        help
  68          This option enables device driver support for the PWM channels
  69          on certain Atmel processors.  Pulse Width Modulation is used for
  70          purposes including software controlled power-efficient backlights
  71          on LCD displays, motor control, and waveform generation.
  72
  73config AB8500_PWM
  74        bool "AB8500 PWM support"
  75        depends on AB8500_CORE && ARCH_U8500
  76        select HAVE_PWM
  77        help
  78          This driver exports functions to enable/disble/config/free Pulse
  79          Width Modulation in the Analog Baseband Chip AB8500.
  80          It is used by led and backlight driver to control the intensity.
  81
  82config ATMEL_TCLIB
  83        bool "Atmel AT32/AT91 Timer/Counter Library"
  84        depends on (AVR32 || ARCH_AT91)
  85        help
  86          Select this if you want a library to allocate the Timer/Counter
  87          blocks found on many Atmel processors.  This facilitates using
  88          these blocks by different drivers despite processor differences.
  89
  90config ATMEL_TCB_CLKSRC
  91        bool "TC Block Clocksource"
  92        depends on ATMEL_TCLIB
  93        default y
  94        help
  95          Select this to get a high precision clocksource based on a
  96          TC block with a 5+ MHz base clock rate.  Two timer channels
  97          are combined to make a single 32-bit timer.
  98
  99          When GENERIC_CLOCKEVENTS is defined, the third timer channel
 100          may be used as a clock event device supporting oneshot mode
 101          (delays of up to two seconds) based on the 32 KiHz clock.
 102
 103config ATMEL_TCB_CLKSRC_BLOCK
 104        int
 105        depends on ATMEL_TCB_CLKSRC
 106        prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
 107        default 0
 108        range 0 1
 109        help
 110          Some chips provide more than one TC block, so you have the
 111          choice of which one to use for the clock framework.  The other
 112          TC can be used for other purposes, such as PWM generation and
 113          interval timing.
 114
 115config IBM_ASM
 116        tristate "Device driver for IBM RSA service processor"
 117        depends on X86 && PCI && INPUT && EXPERIMENTAL
 118        ---help---
 119          This option enables device driver support for in-band access to the
 120          IBM RSA (Condor) service processor in eServer xSeries systems.
 121          The ibmasm device driver allows user space application to access
 122          ASM (Advanced Systems Management) functions on the service
 123          processor. The driver is meant to be used in conjunction with
 124          a user space API.
 125          The ibmasm driver also enables the OS to use the UART on the
 126          service processor board as a regular serial port. To make use of
 127          this feature serial driver support (CONFIG_SERIAL_8250) must be
 128          enabled.
 129
 130          WARNING: This software may not be supported or function
 131          correctly on your IBM server. Please consult the IBM ServerProven
 132          website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
 133          for information on the specific driver level and support statement
 134          for your IBM server.
 135
 136config PHANTOM
 137        tristate "Sensable PHANToM (PCI)"
 138        depends on PCI
 139        help
 140          Say Y here if you want to build a driver for Sensable PHANToM device.
 141
 142          This driver is only for PCI PHANToMs.
 143
 144          If you choose to build module, its name will be phantom. If unsure,
 145          say N here.
 146
 147config INTEL_MID_PTI
 148        tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
 149        depends on PCI
 150        default n
 151        help
 152          The PTI (Parallel Trace Interface) driver directs
 153          trace data routed from various parts in the system out
 154          through an Intel Penwell PTI port and out of the mobile
 155          device for analysis with a debugging tool (Lauterbach or Fido).
 156
 157          You should select this driver if the target kernel is meant for
 158          an Intel Atom (non-netbook) mobile device containing a MIPI
 159          P1149.7 standard implementation.
 160
 161config SGI_IOC4
 162        tristate "SGI IOC4 Base IO support"
 163        depends on PCI
 164        ---help---
 165          This option enables basic support for the IOC4 chip on certain
 166          SGI IO controller cards (IO9, IO10, and PCI-RT).  This option
 167          does not enable any specific functions on such a card, but provides
 168          necessary infrastructure for other drivers to utilize.
 169
 170          If you have an SGI Altix with an IOC4-based card say Y.
 171          Otherwise say N.
 172
 173config TIFM_CORE
 174        tristate "TI Flash Media interface support (EXPERIMENTAL)"
 175        depends on EXPERIMENTAL && PCI
 176        help
 177          If you want support for Texas Instruments(R) Flash Media adapters
 178          you should select this option and then also choose an appropriate
 179          host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
 180          support', if you have a TI PCI74xx compatible card reader, for
 181          example.
 182          You will also have to select some flash card format drivers. MMC/SD
 183          cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
 184          Interface support (MMC_TIFM_SD)'.
 185
 186          To compile this driver as a module, choose M here: the module will
 187          be called tifm_core.
 188
 189config TIFM_7XX1
 190        tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
 191        depends on PCI && TIFM_CORE && EXPERIMENTAL
 192        default TIFM_CORE
 193        help
 194          This option enables support for Texas Instruments(R) PCI74xx and
 195          PCI76xx families of Flash Media adapters, found in many laptops.
 196          To make actual use of the device, you will have to select some
 197          flash card format drivers, as outlined in the TIFM_CORE Help.
 198
 199          To compile this driver as a module, choose M here: the module will
 200          be called tifm_7xx1.
 201
 202config ICS932S401
 203        tristate "Integrated Circuits ICS932S401"
 204        depends on I2C && EXPERIMENTAL
 205        help
 206          If you say yes here you get support for the Integrated Circuits
 207          ICS932S401 clock control chips.
 208
 209          This driver can also be built as a module. If so, the module
 210          will be called ics932s401.
 211
 212config ATMEL_SSC
 213        tristate "Device driver for Atmel SSC peripheral"
 214        depends on AVR32 || ARCH_AT91
 215        ---help---
 216          This option enables device driver support for Atmel Synchronized
 217          Serial Communication peripheral (SSC).
 218
 219          The SSC peripheral supports a wide variety of serial frame based
 220          communications, i.e. I2S, SPI, etc.
 221
 222          If unsure, say N.
 223
 224config ENCLOSURE_SERVICES
 225        tristate "Enclosure Services"
 226        default n
 227        help
 228          Provides support for intelligent enclosures (bays which
 229          contain storage devices).  You also need either a host
 230          driver (SCSI/ATA) which supports enclosures
 231          or a SCSI enclosure device (SES) to use these services.
 232
 233config SGI_XP
 234        tristate "Support communication between SGI SSIs"
 235        depends on NET
 236        depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP
 237        select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 238        select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
 239        select SGI_GRU if X86_64 && SMP
 240        ---help---
 241          An SGI machine can be divided into multiple Single System
 242          Images which act independently of each other and have
 243          hardware based memory protection from the others.  Enabling
 244          this feature will allow for direct communication between SSIs
 245          based on a network adapter and DMA messaging.
 246
 247config CS5535_MFGPT
 248        tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
 249        depends on PCI && X86 && MFD_CS5535
 250        default n
 251        help
 252          This driver provides access to MFGPT functionality for other
 253          drivers that need timers.  MFGPTs are available in the CS5535 and
 254          CS5536 companion chips that are found in AMD Geode and several
 255          other platforms.  They have a better resolution and max interval
 256          than the generic PIT, and are suitable for use as high-res timers.
 257          You probably don't want to enable this manually; other drivers that
 258          make use of it should enable it.
 259
 260config CS5535_MFGPT_DEFAULT_IRQ
 261        int
 262        depends on CS5535_MFGPT
 263        default 7
 264        help
 265          MFGPTs on the CS5535 require an interrupt.  The selected IRQ
 266          can be overridden as a module option as well as by driver that
 267          use the cs5535_mfgpt_ API; however, different architectures might
 268          want to use a different IRQ by default.  This is here for
 269          architectures to set as necessary.
 270
 271config CS5535_CLOCK_EVENT_SRC
 272        tristate "CS5535/CS5536 high-res timer (MFGPT) events"
 273        depends on GENERIC_CLOCKEVENTS && CS5535_MFGPT
 274        help
 275          This driver provides a clock event source based on the MFGPT
 276          timer(s) in the CS5535 and CS5536 companion chips.
 277          MFGPTs have a better resolution and max interval than the
 278          generic PIT, and are suitable for use as high-res timers.
 279
 280config HP_ILO
 281        tristate "Channel interface driver for the HP iLO processor"
 282        depends on PCI
 283        default n
 284        help
 285          The channel interface driver allows applications to communicate
 286          with iLO management processors present on HP ProLiant servers.
 287          Upon loading, the driver creates /dev/hpilo/dXccbN files, which
 288          can be used to gather data from the management processor, via
 289          read and write system calls.
 290
 291          To compile this driver as a module, choose M here: the
 292          module will be called hpilo.
 293
 294config SGI_GRU
 295        tristate "SGI GRU driver"
 296        depends on X86_UV && SMP
 297        default n
 298        select MMU_NOTIFIER
 299        ---help---
 300        The GRU is a hardware resource located in the system chipset. The GRU
 301        contains memory that can be mmapped into the user address space. This memory is
 302        used to communicate with the GRU to perform functions such as load/store,
 303        scatter/gather, bcopy, AMOs, etc.  The GRU is directly accessed by user
 304        instructions using user virtual addresses. GRU instructions (ex., bcopy) use
 305        user virtual addresses for operands.
 306
 307        If you are not running on a SGI UV system, say N.
 308
 309config SGI_GRU_DEBUG
 310        bool  "SGI GRU driver debug"
 311        depends on SGI_GRU
 312        default n
 313        ---help---
 314        This option enables addition debugging code for the SGI GRU driver. If
 315        you are unsure, say N.
 316
 317config APDS9802ALS
 318        tristate "Medfield Avago APDS9802 ALS Sensor module"
 319        depends on I2C
 320        help
 321          If you say yes here you get support for the ALS APDS9802 ambient
 322          light sensor.
 323
 324          This driver can also be built as a module.  If so, the module
 325          will be called apds9802als.
 326
 327config ISL29003
 328        tristate "Intersil ISL29003 ambient light sensor"
 329        depends on I2C && SYSFS
 330        help
 331          If you say yes here you get support for the Intersil ISL29003
 332          ambient light sensor.
 333
 334          This driver can also be built as a module.  If so, the module
 335          will be called isl29003.
 336
 337config ISL29020
 338        tristate "Intersil ISL29020 ambient light sensor"
 339        depends on I2C
 340        help
 341          If you say yes here you get support for the Intersil ISL29020
 342          ambient light sensor.
 343
 344          This driver can also be built as a module.  If so, the module
 345          will be called isl29020.
 346
 347config SENSORS_TSL2550
 348        tristate "Taos TSL2550 ambient light sensor"
 349        depends on I2C && SYSFS
 350        help
 351          If you say yes here you get support for the Taos TSL2550
 352          ambient light sensor.
 353
 354          This driver can also be built as a module.  If so, the module
 355          will be called tsl2550.
 356
 357config SENSORS_BH1780
 358        tristate "ROHM BH1780GLI ambient light sensor"
 359        depends on I2C && SYSFS
 360        help
 361          If you say yes here you get support for the ROHM BH1780GLI
 362          ambient light sensor.
 363
 364          This driver can also be built as a module.  If so, the module
 365          will be called bh1780gli.
 366
 367config SENSORS_BH1770
 368         tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
 369         depends on I2C
 370         ---help---
 371           Say Y here if you want to build a driver for BH1770GLC (ROHM) or
 372           SFH7770 (Osram) combined ambient light and proximity sensor chip.
 373
 374           To compile this driver as a module, choose M here: the
 375           module will be called bh1770glc. If unsure, say N here.
 376
 377config SENSORS_APDS990X
 378         tristate "APDS990X combined als and proximity sensors"
 379         depends on I2C
 380         default n
 381         ---help---
 382           Say Y here if you want to build a driver for Avago APDS990x
 383           combined ambient light and proximity sensor chip.
 384
 385           To compile this driver as a module, choose M here: the
 386           module will be called apds990x. If unsure, say N here.
 387
 388config HMC6352
 389        tristate "Honeywell HMC6352 compass"
 390        depends on I2C
 391        help
 392          This driver provides support for the Honeywell HMC6352 compass,
 393          providing configuration and heading data via sysfs.
 394
 395config EP93XX_PWM
 396        tristate "EP93xx PWM support"
 397        depends on ARCH_EP93XX
 398        help
 399          This option enables device driver support for the PWM channels
 400          on the Cirrus EP93xx processors.  The EP9307 chip only has one
 401          PWM channel all the others have two, the second channel is an
 402          alternate function of the EGPIO14 pin.  A sysfs interface is
 403          provided to control the PWM channels.
 404
 405          To compile this driver as a module, choose M here: the module will
 406          be called ep93xx_pwm.
 407
 408config DS1682
 409        tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
 410        depends on I2C && EXPERIMENTAL
 411        help
 412          If you say yes here you get support for Dallas Semiconductor
 413          DS1682 Total Elapsed Time Recorder.
 414
 415          This driver can also be built as a module.  If so, the module
 416          will be called ds1682.
 417
 418config SPEAR13XX_PCIE_GADGET
 419        bool "PCIe gadget support for SPEAr13XX platform"
 420        depends on ARCH_SPEAR13XX
 421        default n
 422        help
 423         This option enables gadget support for PCIe controller. If
 424         board file defines any controller as PCIe endpoint then a sysfs
 425         entry will be created for that controller. User can use these
 426         sysfs node to configure PCIe EP as per his requirements.
 427
 428config TI_DAC7512
 429        tristate "Texas Instruments DAC7512"
 430        depends on SPI && SYSFS
 431        help
 432          If you say yes here you get support for the Texas Instruments
 433          DAC7512 16-bit digital-to-analog converter.
 434
 435          This driver can also be built as a module. If so, the module
 436          will be called ti_dac7512.
 437
 438config VMWARE_BALLOON
 439        tristate "VMware Balloon Driver"
 440        depends on X86
 441        help
 442          This is VMware physical memory management driver which acts
 443          like a "balloon" that can be inflated to reclaim physical pages
 444          by reserving them in the guest and invalidating them in the
 445          monitor, freeing up the underlying machine pages so they can
 446          be allocated to other guests. The balloon can also be deflated
 447          to allow the guest to use more physical memory.
 448
 449          If unsure, say N.
 450
 451          To compile this driver as a module, choose M here: the
 452          module will be called vmw_balloon.
 453
 454config ARM_CHARLCD
 455        bool "ARM Ltd. Character LCD Driver"
 456        depends on PLAT_VERSATILE
 457        help
 458          This is a driver for the character LCD found on the ARM Ltd.
 459          Versatile and RealView Platform Baseboards. It doesn't do
 460          very much more than display the text "ARM Linux" on the first
 461          line and the Linux version on the second line, but that's
 462          still useful.
 463
 464config BMP085
 465        tristate "BMP085 digital pressure sensor"
 466        depends on I2C && SYSFS
 467        help
 468          If you say yes here you get support for the Bosch Sensortec
 469          BMP085 digital pressure sensor.
 470
 471          To compile this driver as a module, choose M here: the
 472          module will be called bmp085.
 473
 474config PCH_PHUB
 475        tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 476        depends on PCI
 477        help
 478          This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
 479          Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded
 480          processor. The Topcliff has MAC address and Option ROM data in SROM.
 481          This driver can access MAC address and Option ROM data in SROM.
 482
 483          This driver also can be used for LAPIS Semiconductor's IOH,
 484          ML7213/ML7223/ML7831.
 485          ML7213 which is for IVI(In-Vehicle Infotainment) use.
 486          ML7223 IOH is for MP(Media Phone) use.
 487          ML7831 IOH is for general purpose use.
 488          ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 489          ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 490
 491          To compile this driver as a module, choose M here: the module will
 492          be called pch_phub.
 493
 494config USB_SWITCH_FSA9480
 495        tristate "FSA9480 USB Switch"
 496        depends on I2C
 497        help
 498          The FSA9480 is a USB port accessory detector and switch.
 499          The FSA9480 is fully controlled using I2C and enables USB data,
 500          stereo and mono audio, video, microphone and UART data to use
 501          a common connector port.
 502
 503source "drivers/misc/c2port/Kconfig"
 504source "drivers/misc/eeprom/Kconfig"
 505source "drivers/misc/cb710/Kconfig"
 506source "drivers/misc/iwmc3200top/Kconfig"
 507source "drivers/misc/ti-st/Kconfig"
 508source "drivers/misc/lis3lv02d/Kconfig"
 509source "drivers/misc/carma/Kconfig"
 510source "drivers/misc/altera-stapl/Kconfig"
 511
 512endif # MISC_DEVICES
 513
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.