/*
 *
 * arch/arm/mach-u300/include/mach/syscon.h
 *
 *
 * Copyright (C) 2008 ST-Ericsson AB
 *
 * Author: Rickard Andersson <rickard.andersson@stericsson.com>
 */

#ifndef __MACH_SYSCON_H
#define __MACH_SYSCON_H

/*
 * All register defines for SYSCON registers that concerns individual
 * block clocks and reset lines are registered here. This is because
 * we don't want any other file to try to fool around with this stuff.
 */

/* APP side SYSCON registers */
/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
/* CLK Control Register 16bit (R/W) */
#define U300_SYSCON_CCR                                         (0x0000)
#define U300_SYSCON_CCR_I2S1_USE_VCXO                           (0x0040)
#define U300_SYSCON_CCR_I2S0_USE_VCXO                           (0x0020)
#define U300_SYSCON_CCR_TURN_VCXO_ON                            (0x0008)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK                 (0x0007)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER            (0x04)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW                  (0x03)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE         (0x02)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH                 (0x01)
#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST                 (0x00)
/* CLK Status Register 16bit (R/W) */
#define U300_SYSCON_CSR                                         (0x0004)
#define U300_SYSCON_CSR_PLL208_LOCK_IND                         (0x0002)
#define U300_SYSCON_CSR_PLL13_LOCK_IND                          (0x0001)
/* Reset lines for SLOW devices 16bit (R/W) */
#define U300_SYSCON_RSR                                         (0x0014)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RSR_PPM_RESET_EN                            (0x0200)
#endif
#define U300_SYSCON_RSR_ACC_TMR_RESET_EN                        (0x0100)
#define U300_SYSCON_RSR_APP_TMR_RESET_EN                        (0x0080)
#define U300_SYSCON_RSR_RTC_RESET_EN                            (0x0040)
#define U300_SYSCON_RSR_KEYPAD_RESET_EN                         (0x0020)
#define U300_SYSCON_RSR_GPIO_RESET_EN                           (0x0010)
#define U300_SYSCON_RSR_EH_RESET_EN                             (0x0008)
#define U300_SYSCON_RSR_BTR_RESET_EN                            (0x0004)
#define U300_SYSCON_RSR_UART_RESET_EN                           (0x0002)
#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN                    (0x0001)
/* Reset lines for FAST devices 16bit (R/W) */
#define U300_SYSCON_RFR                                         (0x0018)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RFR_UART1_RESET_ENABLE                      (0x0080)
#endif
#define U300_SYSCON_RFR_SPI_RESET_ENABLE                        (0x0040)
#define U300_SYSCON_RFR_MMC_RESET_ENABLE                        (0x0020)
#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE                   (0x0010)
#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE                   (0x0008)
#define U300_SYSCON_RFR_I2C1_RESET_ENABLE                       (0x0004)
#define U300_SYSCON_RFR_I2C0_RESET_ENABLE                       (0x0002)
#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE                (0x0001)
/* Reset lines for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_RRR                                         (0x001c)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_RRR_CDS_RESET_EN                            (0x4000)
#define U300_SYSCON_RRR_ISP_RESET_EN                            (0x2000)
#endif
#define U300_SYSCON_RRR_INTCON_RESET_EN                         (0x1000)
#define U300_SYSCON_RRR_MSPRO_RESET_EN                          (0x0800)
#define U300_SYSCON_RRR_XGAM_RESET_EN                           (0x0100)
#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN                   (0x0080)
#define U300_SYSCON_RRR_NANDIF_RESET_EN                         (0x0040)
#define U300_SYSCON_RRR_EMIF_RESET_EN                           (0x0020)
#define U300_SYSCON_RRR_DMAC_RESET_EN                           (0x0010)
#define U300_SYSCON_RRR_CPU_RESET_EN                            (0x0008)
#define U300_SYSCON_RRR_APEX_RESET_EN                           (0x0004)
#define U300_SYSCON_RRR_AHB_RESET_EN                            (0x0002)
#define U300_SYSCON_RRR_AAIF_RESET_EN                           (0x0001)
/* Clock enable for SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CESR                                        (0x0020)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CESR_PPM_CLK_EN                             (0x0200)
#endif
#define U300_SYSCON_CESR_ACC_TMR_CLK_EN                         (0x0100)
#define U300_SYSCON_CESR_APP_TMR_CLK_EN                         (0x0080)
#define U300_SYSCON_CESR_KEYPAD_CLK_EN                          (0x0040)
#define U300_SYSCON_CESR_GPIO_CLK_EN                            (0x0010)
#define U300_SYSCON_CESR_EH_CLK_EN                              (0x0008)
#define U300_SYSCON_CESR_BTR_CLK_EN                             (0x0004)
#define U300_SYSCON_CESR_UART_CLK_EN                            (0x0002)
#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN                     (0x0001)
/* Clock enable for FAST peripherals 16bit (R/W) */
#define U300_SYSCON_CEFR                                        (0x0024)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CEFR_UART1_CLK_EN                           (0x0200)
#endif
#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN                       (0x0100)
#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN                       (0x0080)
#define U300_SYSCON_CEFR_SPI_CLK_EN                             (0x0040)
#define U300_SYSCON_CEFR_MMC_CLK_EN                             (0x0020)
#define U300_SYSCON_CEFR_I2S1_CLK_EN                            (0x0010)
#define U300_SYSCON_CEFR_I2S0_CLK_EN                            (0x0008)
#define U300_SYSCON_CEFR_I2C1_CLK_EN                            (0x0004)
#define U300_SYSCON_CEFR_I2C0_CLK_EN                            (0x0002)
#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN                     (0x0001)
/* Clock enable for the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CERR                                        (0x0028)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CERR_CDS_CLK_EN                             (0x2000)
#define U300_SYSCON_CERR_ISP_CLK_EN                             (0x1000)
#endif
#define U300_SYSCON_CERR_MSPRO_CLK_EN                           (0x0800)
#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN               (0x0400)
#define U300_SYSCON_CERR_SEMI_CLK_EN                            (0x0200)
#define U300_SYSCON_CERR_XGAM_CLK_EN                            (0x0100)
#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN                       (0x0080)
#define U300_SYSCON_CERR_NANDIF_CLK_EN                          (0x0040)
#define U300_SYSCON_CERR_EMIF_CLK_EN                            (0x0020)
#define U300_SYSCON_CERR_DMAC_CLK_EN                            (0x0010)
#define U300_SYSCON_CERR_CPU_CLK_EN                             (0x0008)
#define U300_SYSCON_CERR_APEX_CLK_EN                            (0x0004)
#define U300_SYSCON_CERR_AHB_CLK_EN                             (0x0002)
#define U300_SYSCON_CERR_AAIF_CLK_EN                            (0x0001)
/* Single block clock enable 16bit (-/W) */
#define U300_SYSCON_SBCER                                       (0x002c)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_PPM_CLK_EN                            (0x0009)
#endif
#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN                        (0x0008)
#define U300_SYSCON_SBCER_APP_TMR_CLK_EN                        (0x0007)
#define U300_SYSCON_SBCER_KEYPAD_CLK_EN                         (0x0006)
#define U300_SYSCON_SBCER_GPIO_CLK_EN                           (0x0004)
#define U300_SYSCON_SBCER_EH_CLK_EN                             (0x0003)
#define U300_SYSCON_SBCER_BTR_CLK_EN                            (0x0002)
#define U300_SYSCON_SBCER_UART_CLK_EN                           (0x0001)
#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN                    (0x0000)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_UART1_CLK_EN                          (0x0019)
#endif
#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN                      (0x0018)
#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN                      (0x0017)
#define U300_SYSCON_SBCER_SPI_CLK_EN                            (0x0016)
#define U300_SYSCON_SBCER_MMC_CLK_EN                            (0x0015)
#define U300_SYSCON_SBCER_I2S1_CLK_EN                           (0x0014)
#define U300_SYSCON_SBCER_I2S0_CLK_EN                           (0x0013)
#define U300_SYSCON_SBCER_I2C1_CLK_EN                           (0x0012)
#define U300_SYSCON_SBCER_I2C0_CLK_EN                           (0x0011)
#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN                    (0x0010)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_SBCER_CDS_CLK_EN                            (0x002D)
#define U300_SYSCON_SBCER_ISP_CLK_EN                            (0x002C)
#endif
#define U300_SYSCON_SBCER_MSPRO_CLK_EN                          (0x002B)
#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN              (0x002A)
#define U300_SYSCON_SBCER_SEMI_CLK_EN                           (0x0029)
#define U300_SYSCON_SBCER_XGAM_CLK_EN                           (0x0028)
#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN                      (0x0027)
#define U300_SYSCON_SBCER_NANDIF_CLK_EN                         (0x0026)
#define U300_SYSCON_SBCER_EMIF_CLK_EN                           (0x0025)
#define U300_SYSCON_SBCER_DMAC_CLK_EN                           (0x0024)
#define U300_SYSCON_SBCER_CPU_CLK_EN                            (0x0023)
#define U300_SYSCON_SBCER_APEX_CLK_EN                           (0x0022)
#define U300_SYSCON_SBCER_AHB_CLK_EN                            (0x0021)
#define U300_SYSCON_SBCER_AAIF_CLK_EN                           (0x0020)
/* Single block clock disable 16bit (-/W) */
#define U300_SYSCON_SBCDR                                       (0x0030)
/* Same values as above for SBCER */
/* Clock force SLOW peripherals 16bit (R/W) */
#define U300_SYSCON_CFSR                                        (0x003c)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN                       (0x0200)
#endif
#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN                   (0x0100)
#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN                   (0x0080)
#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN                    (0x0020)
#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN                      (0x0010)
#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN                        (0x0008)
#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN                       (0x0004)
#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN                      (0x0002)
#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN               (0x0001)
/* Clock force FAST peripherals 16bit (R/W) */
#define U300_SYSCON_CFFR                                        (0x40)
/* Values not defined. Define if you want to use them. */
/* Clock force the rest of the peripherals 16bit (R/W) */
#define U300_SYSCON_CFRR                                        (0x44)
#ifdef CONFIG_MACH_U300_BS335
#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN                       (0x2000)
#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN                       (0x1000)
#endif
#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN                     (0x0800)
#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN         (0x0400)
#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN                      (0x0200)
#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN                      (0x0100)
#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN                 (0x0080)
#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN                    (0x0040)
#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN                      (0x0020)
#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN                      (0x0010)
#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN                       (0x0008)
#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN                      (0x0004)
#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN                       (0x0002)
#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN                      (0x0001)
/* PLL208 Frequency Control 16bit (R/W) */
#define U300_SYSCON_PFCR                                        (0x48)
#define U300_SYSCON_PFCR_DPLL_MULT_NUM                          (0x000F)
/* Power Management Control 16bit (R/W) */
#define U300_SYSCON_PMCR                                        (0x50)
#define U300_SYSCON_PMCR_DCON_ENABLE                            (0x0002)
#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE                        (0x0001)
/*
 * All other clocking registers moved to clock.c!
 */
/* Reset Out 16bit (R/W) */
#define U300_SYSCON_RCR                                         (0x6c)
#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE                   (0x0001)
/* EMIF Slew Rate Control 16bit (R/W) */
#define U300_SYSCON_SRCLR                                       (0x70)
#define U300_SYSCON_SRCLR_MASK                                  (0x03FF)
#define U300_SYSCON_SRCLR_VALUE                                 (0x03FF)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B                       (0x0200)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A                       (0x0100)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B                       (0x0080)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A                       (0x0040)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B                       (0x0020)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A                       (0x0010)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B                       (0x0008)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A                       (0x0004)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B                       (0x0002)
#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A                       (0x0001)
/* EMIF Clock Control Register 16bit (R/W) */
#define U300_SYSCON_ECCR                                        (0x0078)
#define U300_SYSCON_ECCR_MASK                                   (0x000F)
#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE         (0x0008)
#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE        (0x0004)
#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE           (0x0002)
#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE           (0x0001)
/* Step one for killing the applications system 16bit (-/W) */
#define U300_SYSCON_KA1R                                        (0x0080)
#define U300_SYSCON_KA1R_MASK                                   (0xFFFF)
#define U300_SYSCON_KA1R_VALUE                                  (0xFFFF)
/* Step two for killing the application system 16bit (-/W) */
#define U300_SYSCON_KA2R                                        (0x0084)
#define U300_SYSCON_KA2R_MASK                                   (0xFFFF)
#define U300_SYSCON_KA2R_VALUE                                  (0xFFFF)
/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
#define U300_SYSCON_MMF0R                                       (0x90)
#define U300_SYSCON_MMF0R_MASK                                  (0x00FF)
#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK                      (0x00F0)
#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK                       (0x000F)
/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
#define U300_SYSCON_MMF1R                                       (0x94)
#define U300_SYSCON_MMF1R_MASK                                  (0x00FF)
#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK                      (0x00F0)
#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK                       (0x000F)
/* AAIF control register 16 bit (R/W) */
#define U300_SYSCON_AAIFCR                                      (0x98)
#define U300_SYSCON_AAIFCR_MASK                                 (0x0003)
#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK                       (0x0003)
#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL                 (0x0000)
#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING                 (0x0001)
#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT                 (0x0002)
#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT                 (0x0003)
/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
#define U300_SYSCON_MMCR                                        (0x9C)
#define U300_SYSCON_MMCR_MASK                                   (0x0003)
#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE                  (0x0002)
#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE                   (0x0001)
/* Pull up/down control (R/W) */
#define U300_SYSCON_PUCR                                        (0x104)
#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE                (0x0200)
#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE            (0x0100)
#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE                 (0x0080)
#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE                  (0x0040)
#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK                      (0x003F)
/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
#define U300_SYSCON_S0CCR                                       (0x120)
#define U300_SYSCON_S0CCR_FIELD_MASK                            (0x43FF)
#define U300_SYSCON_S0CCR_CLOCK_REQ                             (0x4000)
#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR                     (0x2000)
#define U300_SYSCON_S0CCR_CLOCK_INV                             (0x0200)
#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK                       (0x01E0)
#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK                     (0x001E)
#define U300_SYSCON_S0CCR_CLOCK_ENABLE                          (0x0001)
#define U300_SYSCON_S0CCR_SEL_MCLK                              (0x8<<1)
#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK                       (0xA<<1)
#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK                      (0xC<<1)
#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK                      (0xD<<1)
#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK                    (0xE<<1)
#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK                     (0x0<<1)
#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK                       (0x2<<1)
#define U300_SYSCON_S0CCR_SEL_RTC_CLK                           (0x4<<1)
#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK                    (0x6<<1)
/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
#define U300_SYSCON_S1CCR                                       (0x124)
#define U300_SYSCON_S1CCR_FIELD_MASK                            (0x43FF)
#define U300_SYSCON_S1CCR_CLOCK_REQ                             (0x4000)
#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR                     (0x2000)
#define U300_SYSCON_S1CCR_CLOCK_INV                             (0x0200)
#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK                       (0x01E0)
#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK                     (0x001E)
#define U300_SYSCON_S1CCR_CLOCK_ENABLE                          (0x0001)
#define U300_SYSCON_S1CCR_SEL_MCLK                              (0x8<<1)
#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK                       (0xA<<1)
#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK                      (0xC<<1)
#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK                      (0xD<<1)
#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK                    (0xE<<1)
#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK                     (0x0<<1)
#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK                       (0x2<<1)
#define U300_SYSCON_S1CCR_SEL_RTC_CLK                           (0x4<<1)
#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK                    (0x6<<1)
/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
#define U300_SYSCON_S2CCR                                       (0x128)
#define U300_SYSCON_S2CCR_FIELD_MASK                            (0xC3FF)
#define U300_SYSCON_S2CCR_CLK_STEAL                             (0x8000)
#define U300_SYSCON_S2CCR_CLOCK_REQ                             (0x4000)
#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR                     (0x2000)
#define U300_SYSCON_S2CCR_CLOCK_INV                             (0x0200)
#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK                       (0x01E0)
#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK                     (0x001E)
#define U300_SYSCON_S2CCR_CLOCK_ENABLE                          (0x0001)
#define U300_SYSCON_S2CCR_SEL_MCLK                              (0x8<<1)
#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK                       (0xA<<1)
#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK                      (0xC<<1)
#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK                      (0xD<<1)
#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK                    (0xE<<1)
#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK                     (0x0<<1)
#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK                       (0x2<<1)
#define U300_SYSCON_S2CCR_SEL_RTC_CLK                           (0x4<<1)
#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK                    (0x6<<1)
/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
#define U300_SYSCON_MCR                                         (0x12c)
#define U300_SYSCON_MCR_FIELD_MASK                              (0x00FF)
#define U300_SYSCON_MCR_PMGEN_CR_4_MASK                         (0x00C0)
#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO                         (0x0000)
#define U300_SYSCON_MCR_PMGEN_CR_4_SPI                          (0x0040)
#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF                         (0x00C0)
#define U300_SYSCON_MCR_PMGEN_CR_2_MASK                         (0x0030)
#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO                         (0x0000)
#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC                (0x0010)
#define U300_SYSCON_MCR_PMGEN_CR_2_DSP                          (0x0020)
#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF                         (0x0030)
#define U300_SYSCON_MCR_PMGEN_CR_0_MASK                         (0x000C)
#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1              (0x0000)
#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2              (0x0004)
#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3              (0x0008)
#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM                 (0x000C)
#define U300_SYSCON_MCR_PM1G_MODE_ENABLE                        (0x0002)
#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE                       (0x0001)
/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
#define U300_SYSCON_PICR                                        (0x0130)
#define U300_SYSCON_PICR_MASK                                   (0x00FF)
#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE           (0x0080)
#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE          (0x0040)
#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE            (0x0020)
#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE           (0x0010)
#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE            (0x0008)
#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE              (0x0004)
#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE           (0x0002)
#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE             (0x0001)
/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
#define U300_SYSCON_PISR                                        (0x0134)
#define U300_SYSCON_PISR_MASK                                   (0x000F)
#define U300_SYSCON_PISR_PLL13_UNLOCK_IND                       (0x0008)
#define U300_SYSCON_PISR_PLL13_LOCK_IND                         (0x0004)
#define U300_SYSCON_PISR_PLL208_UNLOCK_IND                      (0x0002)
#define U300_SYSCON_PISR_PLL208_LOCK_IND                        (0x0001)
/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
#define U300_SYSCON_PICLR                                       (0x0138)
#define U300_SYSCON_PICLR_MASK                                  (0x000F)
#define U300_SYSCON_PICLR_RWMASK                                (0x0000)
#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC                       (0x0008)
#define U300_SYSCON_PICLR_PLL13_LOCK_SC                         (0x0004)
#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC                      (0x0002)
#define U300_SYSCON_PICLR_PLL208_LOCK_SC                        (0x0001)
/* CAMIF_CONTROL 16 bit (-/W) */
#define U300_SYSCON_CICR                                        (0x013C)
#define U300_SYSCON_CICR_MASK                                   (0x0FFF)
#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK              (0x0F00)
#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1             (0x0C00)
#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0             (0x0300)
#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK                (0x00F0)
#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1               (0x00C0)
#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0               (0x0030)
#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK             (0x000F)
#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1            (0x000C)
#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0            (0x0003)
/* Clock activity observability register 0 */
#define U300_SYSCON_C0OAR                                       (0x140)
#define U300_SYSCON_C0OAR_MASK                                  (0xFFFF)
#define U300_SYSCON_C0OAR_VALUE                                 (0xFFFF)
#define U300_SYSCON_C0OAR_BT_H_CLK                              (0x8000)
#define U300_SYSCON_C0OAR_ASPB_P_CLK                            (0x4000)
#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK                        (0x2000)
#define U300_SYSCON_C0OAR_APP_SEMI_CLK                          (0x1000)
#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK                     (0x0800)
#define U300_SYSCON_C0OAR_APP_I2S1_CLK                          (0x0400)
#define U300_SYSCON_C0OAR_APP_I2S0_CLK                          (0x0200)
#define U300_SYSCON_C0OAR_APP_CPU_CLK                           (0x0100)
#define U300_SYSCON_C0OAR_APP_52_CLK                            (0x0080)
#define U300_SYSCON_C0OAR_APP_208_CLK                           (0x0040)
#define U300_SYSCON_C0OAR_APP_104_CLK                           (0x0020)
#define U300_SYSCON_C0OAR_APEX_CLK                              (0x0010)
#define U300_SYSCON_C0OAR_AHPB_M_H_CLK                          (0x0008)
#define U300_SYSCON_C0OAR_AHB_CLK                               (0x0004)
#define U300_SYSCON_C0OAR_AFPB_P_CLK                            (0x0002)
#define U300_SYSCON_C0OAR_AAIF_CLK                              (0x0001)
/* Clock activity observability register 1 */
#define U300_SYSCON_C1OAR                                       (0x144)
#define U300_SYSCON_C1OAR_MASK                                  (0x3FFE)
#define U300_SYSCON_C1OAR_VALUE                                 (0x3FFE)
#define U300_SYSCON_C1OAR_NFIF_F_CLK                            (0x2000)
#define U300_SYSCON_C1OAR_MSPRO_CLK                             (0x1000)
#define U300_SYSCON_C1OAR_MMC_P_CLK                             (0x0800)
#define U300_SYSCON_C1OAR_MMC_CLK                               (0x0400)
#define U300_SYSCON_C1OAR_KP_P_CLK                              (0x0200)
#define U300_SYSCON_C1OAR_I2C1_P_CLK                            (0x0100)
#define U300_SYSCON_C1OAR_I2C0_P_CLK                            (0x0080)
#define U300_SYSCON_C1OAR_GPIO_CLK                              (0x0040)
#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK                         (0x0020)
#define U300_SYSCON_C1OAR_EMIF_H_CLK                            (0x0010)
#define U300_SYSCON_C1OAR_EVHIST_CLK                            (0x0008)
#define U300_SYSCON_C1OAR_PPM_CLK                               (0x0004)
#define U300_SYSCON_C1OAR_DMA_CLK                               (0x0002)
/* Clock activity observability register 2 */
#define U300_SYSCON_C2OAR                                       (0x148)
#define U300_SYSCON_C2OAR_MASK                                  (0x0FFF)
#define U300_SYSCON_C2OAR_VALUE                                 (0x0FFF)
#define U300_SYSCON_C2OAR_XGAM_CDI_CLK                          (0x0800)
#define U300_SYSCON_C2OAR_XGAM_CLK                              (0x0400)
#define U300_SYSCON_C2OAR_VC_H_CLK                              (0x0200)
#define U300_SYSCON_C2OAR_VC_CLK                                (0x0100)
#define U300_SYSCON_C2OAR_UA_P_CLK                              (0x0080)
#define U300_SYSCON_C2OAR_TMR1_CLK                              (0x0040)
#define U300_SYSCON_C2OAR_TMR0_CLK                              (0x0020)
#define U300_SYSCON_C2OAR_SPI_P_CLK                             (0x0010)
#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK                     (0x0008)
#define U300_SYSCON_C2OAR_PCM_I2S1_CLK                          (0x0004)
#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK                     (0x0002)
#define U300_SYSCON_C2OAR_PCM_I2S0_CLK                          (0x0001)

/* Chip ID register 16bit (R/-) */
#define U300_SYSCON_CIDR                                        (0x400)
/* Video IRQ clear 16bit (R/W) */
#define U300_SYSCON_VICR                                        (0x404)
#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE                (0x0002)
#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE                (0x0001)
/* SMCR */
#define U300_SYSCON_SMCR                                        (0x4d0)
#define U300_SYSCON_SMCR_FIELD_MASK                             (0x000e)
#define U300_SYSCON_SMCR_SEMI_SREFACK_IND                       (0x0008)
#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE                    (0x0004)
#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE              (0x0002)
/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
#define U300_SYSCON_CSDR                                        (0x4f0)
#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE                        (0x0001)
/* PRINT_CONTROL Print Control 16bit (R/-) */
#define U300_SYSCON_PCR                                         (0x4f8)
#define U300_SYSCON_PCR_SERV_IND                                (0x0001)
/* BOOT_CONTROL 16bit (R/-) */
#define U300_SYSCON_BCR                                         (0x4fc)
#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND              (0x0400)
#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND              (0x0200)
#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK                  (0x01FC)
#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK                      (0x0003)


/* CPU clock defines */
/**
 * CPU high frequency in MHz
 */
#define SYSCON_CPU_CLOCK_HIGH    208
/**
 * CPU medium frequency in MHz
 */
#define SYSCON_CPU_CLOCK_MEDIUM   52
/**
 * CPU low frequency in MHz
 */
#define SYSCON_CPU_CLOCK_LOW      13

/* EMIF clock defines */
/**
 * EMIF high frequency in MHz
 */
#define SYSCON_EMIF_CLOCK_HIGH   104
/**
 * EMIF medium frequency in MHz
 */
#define SYSCON_EMIF_CLOCK_MEDIUM  52
/**
 * EMIF low frequency in MHz
 */
#define SYSCON_EMIF_CLOCK_LOW     13

/* AHB clock defines */
/**
 * AHB high frequency in MHz
 */
#define SYSCON_AHB_CLOCK_HIGH     52
/**
 * AHB medium frequency in MHz
 */
#define SYSCON_AHB_CLOCK_MEDIUM   26
/**
 * AHB low frequency in MHz
 */
#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */

enum syscon_busmaster {
  SYSCON_BM_DMAC,
  SYSCON_BM_XGAM,
  SYSCON_BM_VIDEO_ENC
};

/* Selectr a resistor or a set of resistors */
enum syscon_pull_up_down {
  SYSCON_PU_KEY_IN_EN,
  SYSCON_PU_EMIF_1_8_BIT_EN,
  SYSCON_PU_EMIF_1_16_BIT_EN,
  SYSCON_PU_EMIF_1_NFIF_READY_EN,
  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
};

/*
 * Note that this array must match the order of the array "clk_reg"
 * in syscon.c
 */
enum syscon_clk {
  SYSCON_CLKCONTROL_SLOW_BRIDGE,
  SYSCON_CLKCONTROL_UART,
  SYSCON_CLKCONTROL_BTR,
  SYSCON_CLKCONTROL_EH,
  SYSCON_CLKCONTROL_GPIO,
  SYSCON_CLKCONTROL_KEYPAD,
  SYSCON_CLKCONTROL_APP_TIMER,
  SYSCON_CLKCONTROL_ACC_TIMER,
  SYSCON_CLKCONTROL_FAST_BRIDGE,
  SYSCON_CLKCONTROL_I2C0,
  SYSCON_CLKCONTROL_I2C1,
  SYSCON_CLKCONTROL_I2S0,
  SYSCON_CLKCONTROL_I2S1,
  SYSCON_CLKCONTROL_MMC,
  SYSCON_CLKCONTROL_SPI,
  SYSCON_CLKCONTROL_I2S0_CORE,
  SYSCON_CLKCONTROL_I2S1_CORE,
  SYSCON_CLKCONTROL_UART1,
  SYSCON_CLKCONTROL_AAIF,
  SYSCON_CLKCONTROL_AHB,
  SYSCON_CLKCONTROL_APEX,
  SYSCON_CLKCONTROL_CPU,
  SYSCON_CLKCONTROL_DMA,
  SYSCON_CLKCONTROL_EMIF,
  SYSCON_CLKCONTROL_NAND_IF,
  SYSCON_CLKCONTROL_VIDEO_ENC,
  SYSCON_CLKCONTROL_XGAM,
  SYSCON_CLKCONTROL_SEMI,
  SYSCON_CLKCONTROL_AHB_SUBSYS,
  SYSCON_CLKCONTROL_MSPRO
};

enum syscon_sysclk_mode {
  SYSCON_SYSCLK_DISABLED,
  SYSCON_SYSCLK_M_CLK,
  SYSCON_SYSCLK_ACC_FSM,
  SYSCON_SYSCLK_PLL60_48,
  SYSCON_SYSCLK_PLL60_60,
  SYSCON_SYSCLK_ACC_PLL208,
  SYSCON_SYSCLK_APP_PLL13,
  SYSCON_SYSCLK_APP_FSM,
  SYSCON_SYSCLK_RTC,
  SYSCON_SYSCLK_APP_PLL208
};

enum syscon_sysclk_req {
  SYSCON_SYSCLKREQ_DISABLED,
  SYSCON_SYSCLKREQ_ACTIVE_LOW,
  SYSCON_SYSCLKREQ_MONITOR
};

enum syscon_clk_mode {
  SYSCON_CLKMODE_OFF,
  SYSCON_CLKMODE_DEFAULT,
  SYSCON_CLKMODE_LOW,
  SYSCON_CLKMODE_MEDIUM,
  SYSCON_CLKMODE_HIGH,
  SYSCON_CLKMODE_PERMANENT,
  SYSCON_CLKMODE_ON,
};

enum syscon_call_mode {
  SYSCON_CLKCALL_NOWAIT,
  SYSCON_CLKCALL_WAIT,
};

int syscon_dc_on(bool keep_power_on);
int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
                                      bool active);
bool syscon_get_busmaster_active_state(void);
int syscon_set_sleep_mask(enum syscon_clk,
                          bool sleep_ctrl);
int syscon_config_sysclk(u32 sysclk,
                         enum syscon_sysclk_mode sysclkmode,
                         bool inverse,
                         u32 divisor,
                         enum syscon_sysclk_req sysclkreq);
bool syscon_can_turn_off_semi_clock(void);

/* This function is restricted to core.c */
int syscon_request_normal_power(bool req);

/* This function is restricted to be used by platform_speed.c */
int syscon_speed_request(enum syscon_call_mode wait_mode,
                         enum syscon_clk_mode req_clk_mode);
#endif /* __MACH_SYSCON_H */