linux/drivers/usb/serial/Kconfig
<<
>>
Prefs
   1#
   2# USB Serial device configuration
   3#
   4
   5menuconfig USB_SERIAL
   6        tristate "USB Serial Converter support"
   7        depends on USB
   8        ---help---
   9          Say Y here if you have a USB device that provides normal serial
  10          ports, or acts like a serial device, and you want to connect it to
  11          your USB bus.
  12
  13          Please read <file:Documentation/usb/usb-serial.txt> for more
  14          information on the specifics of the different devices that are
  15          supported, and on how to use them.
  16
  17          To compile this driver as a module, choose M here: the
  18          module will be called usbserial.
  19
  20if USB_SERIAL
  21
  22config USB_SERIAL_CONSOLE
  23        bool "USB Serial Console device support"
  24        depends on USB_SERIAL=y
  25        ---help---
  26          If you say Y here, it will be possible to use a USB to serial
  27          converter port as the system console (the system console is the
  28          device which receives all kernel messages and warnings and which
  29          allows logins in single user mode). This could be useful if some
  30          terminal or printer is connected to that serial port.
  31
  32          Even if you say Y here, the currently visible virtual console
  33          (/dev/tty0) will still be used as the system console by default, but
  34          you can alter that using a kernel command line option such as
  35          "console=ttyUSB0". (Try "man bootparam" or see the documentation of
  36          your boot loader (lilo or loadlin) about how to pass options to the
  37          kernel at boot time.)
  38
  39          If you don't have a VGA card installed and you say Y here, the
  40          kernel will automatically use the first USB to serial converter
  41          port, /dev/ttyUSB0, as system console.
  42
  43          If unsure, say N.
  44
  45config USB_EZUSB
  46        bool "Functions for loading firmware on EZUSB chips"
  47        help
  48            Say Y here if you need EZUSB device support.
  49
  50config USB_SERIAL_GENERIC
  51        bool "USB Generic Serial Driver"
  52        help
  53          Say Y here if you want to use the generic USB serial driver.  Please
  54          read <file:Documentation/usb/usb-serial.txt> for more information on
  55          using this driver.  It is recommended that the "USB Serial converter
  56          support" be compiled as a module for this driver to be used
  57          properly.
  58
  59config USB_SERIAL_AIRCABLE
  60        tristate "USB AIRcable Bluetooth Dongle Driver"
  61        help
  62            Say Y here if you want to use USB AIRcable Bluetooth Dongle.
  63
  64            To compile this driver as a module, choose M here: the module
  65            will be called aircable.
  66
  67config USB_SERIAL_ARK3116
  68        tristate "USB ARK Micro 3116 USB Serial Driver"
  69        help
  70          Say Y here if you want to use a ARK Micro 3116 USB to Serial
  71          device.
  72
  73          To compile this driver as a module, choose M here: the
  74          module will be called ark3116
  75
  76config USB_SERIAL_BELKIN
  77        tristate "USB Belkin and Peracom Single Port Serial Driver"
  78        help
  79          Say Y here if you want to use a Belkin USB Serial single port
  80          adaptor (F5U103 is one of the model numbers) or the Peracom single
  81          port USB to serial adapter.
  82
  83          To compile this driver as a module, choose M here: the
  84          module will be called belkin_sa.
  85
  86config USB_SERIAL_CH341
  87        tristate "USB Winchiphead CH341 Single Port Serial Driver"
  88        help
  89          Say Y here if you want to use a Winchiphead CH341 single port
  90          USB to serial adapter.
  91
  92          To compile this driver as a module, choose M here: the
  93          module will be called ch341.
  94
  95config USB_SERIAL_WHITEHEAT
  96        tristate "USB ConnectTech WhiteHEAT Serial Driver"
  97        select USB_EZUSB
  98        help
  99          Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
 100          USB to serial converter device.
 101
 102          To compile this driver as a module, choose M here: the
 103          module will be called whiteheat.
 104
 105config USB_SERIAL_DIGI_ACCELEPORT
 106        tristate "USB Digi International AccelePort USB Serial Driver"
 107        ---help---
 108          Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
 109          2 port (plus parallel port) and 4 port USB serial converters.  The
 110          parallel port on the USB 2 appears as a third serial port on Linux.
 111          The Digi Acceleport USB 8 is not yet supported by this driver.
 112
 113          This driver works under SMP with the usb-uhci driver.  It does not
 114          work under SMP with the uhci driver.
 115
 116          To compile this driver as a module, choose M here: the
 117          module will be called digi_acceleport.
 118
 119config USB_SERIAL_CP210X
 120        tristate "USB CP210x family of UART Bridge Controllers"
 121        help
 122          Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
 123          to RS232 converters.
 124
 125          To compile this driver as a module, choose M here: the
 126          module will be called cp210x.
 127
 128config USB_SERIAL_CYPRESS_M8
 129        tristate "USB Cypress M8 USB Serial Driver"
 130        help
 131          Say Y here if you want to use a device that contains the Cypress
 132          USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
 133
 134                Attempted SMP support... send bug reports!
 135
 136          Supported microcontrollers in the CY4601 family are:
 137                CY7C63741 CY7C63742 CY7C63743 CY7C64013
 138        
 139          To compile this driver as a module, choose M here: the
 140          module will be called cypress_m8.
 141
 142config USB_SERIAL_EMPEG
 143        tristate "USB Empeg empeg-car Mark I/II Driver"
 144        help
 145          Say Y here if you want to connect to your Empeg empeg-car Mark I/II
 146          mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
 147          device node.  See <file:Documentation/usb/usb-serial.txt> for more
 148          tidbits of information.
 149
 150          To compile this driver as a module, choose M here: the
 151          module will be called empeg.
 152
 153config USB_SERIAL_FTDI_SIO
 154        tristate "USB FTDI Single Port Serial Driver"
 155        ---help---
 156          Say Y here if you want to use a FTDI SIO single port USB to serial
 157          converter device. The implementation I have is called the USC-1000.
 158          This driver has also be tested with the 245 and 232 devices.
 159
 160          See <http://ftdi-usb-sio.sourceforge.net/> for more
 161          information on this driver and the device.
 162
 163          To compile this driver as a module, choose M here: the
 164          module will be called ftdi_sio.
 165
 166config USB_SERIAL_FUNSOFT
 167        tristate "USB Fundamental Software Dongle Driver"
 168        ---help---
 169          Say Y here if you want to use the Fundamental Software dongle.
 170
 171          To compile this driver as a module, choose M here: the
 172          module will be called funsoft.
 173
 174config USB_SERIAL_VISOR
 175        tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 176        help
 177          Say Y here if you want to connect to your HandSpring Visor, Palm
 178          m500 or m505 through its USB docking station. See
 179          <http://usbvisor.sourceforge.net/index.php3> for more information on using this
 180          driver.
 181
 182          To compile this driver as a module, choose M here: the
 183          module will be called visor.
 184
 185config USB_SERIAL_IPAQ
 186        tristate "USB PocketPC PDA Driver"
 187        help
 188          Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
 189          or any other PDA running Windows CE 3.0 or PocketPC 2002
 190          using a USB cradle/cable. For information on using the driver,
 191          read <file:Documentation/usb/usb-serial.txt>.
 192
 193          To compile this driver as a module, choose M here: the
 194          module will be called ipaq.
 195
 196config USB_SERIAL_IR
 197        tristate "USB IR Dongle Serial Driver"
 198        help
 199          Say Y here if you want to enable simple serial support for USB IrDA
 200          devices.  This is useful if you do not want to use the full IrDA
 201          stack.
 202
 203          To compile this driver as a module, choose M here: the
 204          module will be called ir-usb.
 205
 206config USB_SERIAL_EDGEPORT
 207        tristate "USB Inside Out Edgeport Serial Driver"
 208        ---help---
 209          Say Y here if you want to use any of the following devices from
 210          Inside Out Networks (Digi):
 211          Edgeport/4
 212          Rapidport/4
 213          Edgeport/4t
 214          Edgeport/2
 215          Edgeport/4i
 216          Edgeport/2i
 217          Edgeport/421
 218          Edgeport/21
 219          Edgeport/8
 220          Edgeport/8 Dual
 221          Edgeport/2D8
 222          Edgeport/4D8
 223          Edgeport/8i
 224          Edgeport/2 DIN
 225          Edgeport/4 DIN
 226          Edgeport/16 Dual
 227
 228          To compile this driver as a module, choose M here: the
 229          module will be called io_edgeport.
 230
 231config USB_SERIAL_EDGEPORT_TI
 232        tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
 233        help
 234          Say Y here if you want to use any of the devices from Inside Out
 235          Networks (Digi) that are not supported by the io_edgeport driver.
 236          This includes the Edgeport/1 device.
 237
 238          To compile this driver as a module, choose M here: the
 239          module will be called io_ti.
 240
 241config USB_SERIAL_GARMIN
 242       tristate "USB Garmin GPS driver"
 243       help
 244         Say Y here if you want to connect to your Garmin GPS.
 245         Should work with most Garmin GPS devices which have a native USB port.
 246
 247         See <http://sourceforge.net/projects/garmin-gps> for the latest
 248         version of the driver.
 249
 250         To compile this driver as a module, choose M here: the
 251         module will be called garmin_gps.
 252
 253config USB_SERIAL_IPW
 254        tristate "USB IPWireless (3G UMTS TDD) Driver"
 255        select USB_SERIAL_WWAN
 256        help
 257          Say Y here if you want to use a IPWireless USB modem such as
 258          the ones supplied by Axity3G/Sentech South Africa.
 259
 260          To compile this driver as a module, choose M here: the
 261          module will be called ipw.
 262
 263config USB_SERIAL_IUU
 264        tristate "USB Infinity USB Unlimited Phoenix Driver"
 265        help
 266          Say Y here if you want to use a IUU in phoenix mode and get
 267          an extra ttyUSBx device. More information available on
 268          http://eczema.ecze.com/iuu_phoenix.html
 269
 270          To compile this driver as a module, choose M here: the
 271          module will be called iuu_phoenix.o
 272
 273config USB_SERIAL_KEYSPAN_PDA
 274        tristate "USB Keyspan PDA Single Port Serial Driver"
 275        select USB_EZUSB
 276        help
 277          Say Y here if you want to use a Keyspan PDA single port USB to
 278          serial converter device.  This driver makes use of firmware
 279          developed from scratch by Brian Warner.
 280
 281          To compile this driver as a module, choose M here: the
 282          module will be called keyspan_pda.
 283
 284config USB_SERIAL_KEYSPAN
 285        tristate "USB Keyspan USA-xxx Serial Driver"
 286        select USB_EZUSB
 287        ---help---
 288          Say Y here if you want to use Keyspan USB to serial converter
 289          devices.  This driver makes use of Keyspan's official firmware
 290          and was developed with their support.  You must also include
 291          firmware to support your particular device(s).
 292
 293          See <http://blemings.org/hugh/keyspan.html> for more information.
 294
 295          To compile this driver as a module, choose M here: the
 296          module will be called keyspan.
 297
 298config USB_SERIAL_KEYSPAN_MPR
 299        bool "USB Keyspan MPR Firmware"
 300        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 301        help
 302          Say Y here to include firmware for the Keyspan MPR converter.
 303
 304config USB_SERIAL_KEYSPAN_USA28
 305        bool "USB Keyspan USA-28 Firmware"
 306        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 307        help
 308          Say Y here to include firmware for the USA-28 converter.
 309
 310config USB_SERIAL_KEYSPAN_USA28X
 311        bool "USB Keyspan USA-28X Firmware"
 312        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 313        help
 314          Say Y here to include firmware for the USA-28X converter.
 315          Be sure you have a USA-28X, there are also 28XA and 28XB
 316          models, the label underneath has the actual part number.
 317
 318config USB_SERIAL_KEYSPAN_USA28XA
 319        bool "USB Keyspan USA-28XA Firmware"
 320        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 321        help
 322          Say Y here to include firmware for the USA-28XA converter.
 323          Be sure you have a USA-28XA, there are also 28X and 28XB
 324          models, the label underneath has the actual part number.
 325
 326config USB_SERIAL_KEYSPAN_USA28XB
 327        bool "USB Keyspan USA-28XB Firmware"
 328        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 329        help
 330          Say Y here to include firmware for the USA-28XB converter.
 331          Be sure you have a USA-28XB, there are also 28X and 28XA
 332          models, the label underneath has the actual part number.
 333
 334config USB_SERIAL_KEYSPAN_USA19
 335        bool "USB Keyspan USA-19 Firmware"
 336        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 337        help
 338          Say Y here to include firmware for the USA-19 converter.
 339
 340config USB_SERIAL_KEYSPAN_USA18X
 341        bool "USB Keyspan USA-18X Firmware"
 342        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 343        help
 344          Say Y here to include firmware for the USA-18X converter.
 345
 346config USB_SERIAL_KEYSPAN_USA19W
 347        bool "USB Keyspan USA-19W Firmware"
 348        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 349        help
 350          Say Y here to include firmware for the USA-19W converter.
 351
 352config USB_SERIAL_KEYSPAN_USA19QW
 353        bool "USB Keyspan USA-19QW Firmware"
 354        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 355        help
 356          Say Y here to include firmware for the USA-19QW converter.
 357
 358config USB_SERIAL_KEYSPAN_USA19QI
 359        bool "USB Keyspan USA-19QI Firmware"
 360        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 361        help
 362          Say Y here to include firmware for the USA-19QI converter.
 363
 364config USB_SERIAL_KEYSPAN_USA49W
 365        bool "USB Keyspan USA-49W Firmware"
 366        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 367        help
 368          Say Y here to include firmware for the USA-49W converter.
 369
 370config USB_SERIAL_KEYSPAN_USA49WLC
 371        bool "USB Keyspan USA-49WLC Firmware"
 372        depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
 373        help
 374          Say Y here to include firmware for the USA-49WLC converter.
 375
 376config USB_SERIAL_KLSI
 377        tristate "USB KL5KUSB105 (Palmconnect) Driver"
 378        ---help---
 379          Say Y here if you want to use a KL5KUSB105 - based single port
 380          serial adapter. The most widely known -- and currently the only
 381          tested -- device in this category is the PalmConnect USB Serial
 382          adapter sold by Palm Inc. for use with their Palm III and Palm V
 383          series PDAs.
 384
 385          Please read <file:Documentation/usb/usb-serial.txt> for more
 386          information.
 387
 388          To compile this driver as a module, choose M here: the
 389          module will be called kl5kusb105.
 390
 391config USB_SERIAL_KOBIL_SCT
 392        tristate "USB KOBIL chipcard reader"
 393        ---help---
 394          Say Y here if you want to use one of the following KOBIL USB chipcard
 395          readers:
 396
 397            - USB TWIN
 398            - KAAN Standard Plus
 399            - KAAN SIM
 400            - SecOVID Reader Plus
 401            - B1 Professional
 402            - KAAN Professional
 403
 404          Note that you need a current CT-API.
 405          To compile this driver as a module, choose M here: the
 406          module will be called kobil_sct.
 407
 408config USB_SERIAL_MCT_U232
 409        tristate "USB MCT Single Port Serial Driver"
 410        ---help---
 411          Say Y here if you want to use a USB Serial single port adapter from
 412          Magic Control Technology Corp. (U232 is one of the model numbers).
 413
 414          This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
 415          BAY, Belkin F5U109, and Belkin F5U409 devices.
 416
 417          To compile this driver as a module, choose M here: the
 418          module will be called mct_u232.
 419
 420config USB_SERIAL_MOS7720
 421        tristate "USB Moschip 7720 Serial Driver"
 422        ---help---
 423          Say Y here if you want to use USB Serial single and double
 424          port adapters from Moschip Semiconductor Tech.
 425
 426          To compile this driver as a module, choose M here: the
 427          module will be called mos7720.
 428
 429config USB_SERIAL_MOS7715_PARPORT
 430        bool "Support for parallel port on the Moschip 7715"
 431        depends on USB_SERIAL_MOS7720
 432        depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
 433        select PARPORT_NOT_PC
 434        ---help---
 435        Say Y if you have a Moschip 7715 device and would like to use
 436        the parallel port it provides.  The port will register with
 437        the parport subsystem as a low-level driver.
 438
 439config USB_SERIAL_MOS7840
 440        tristate "USB Moschip 7840/7820 USB Serial Driver"
 441        ---help---
 442          Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
 443          Dual-Serial port device from MosChip Semiconductor.
 444
 445          The MCS7840 and MCS7820 have been developed to connect a wide range
 446          of standard serial devices to a USB host.  The MCS7840 has a USB
 447          device controller connected to four (4) individual UARTs while the
 448          MCS7820 controller connects to two (2) individual UARTs.
 449
 450          To compile this driver as a module, choose M here: the
 451          module will be called mos7840.  If unsure, choose N.
 452
 453config USB_SERIAL_MOTOROLA
 454        tristate "USB Motorola Phone modem driver"
 455        ---help---
 456          Say Y here if you want to use a Motorola phone with a USB
 457          connector as a modem link.
 458
 459          To compile this driver as a module, choose M here: the
 460          module will be called moto_modem.  If unsure, choose N.
 461
 462config USB_SERIAL_NAVMAN
 463        tristate "USB Navman GPS device"
 464        help
 465          To compile this driver as a module, choose M here: the
 466          module will be called navman.
 467
 468config USB_SERIAL_PL2303
 469        tristate "USB Prolific 2303 Single Port Serial Driver"
 470        help
 471          Say Y here if you want to use the PL2303 USB Serial single port
 472          adapter from Prolific.
 473
 474          To compile this driver as a module, choose M here: the
 475          module will be called pl2303.
 476
 477config USB_SERIAL_OTI6858
 478        tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
 479        help
 480          Say Y here if you want to use the OTi-6858 single port USB to serial
 481          converter device.
 482
 483          To compile this driver as a module, choose M here: the
 484          module will be called oti6858.
 485
 486config USB_SERIAL_QCAUX
 487        tristate "USB Qualcomm Auxiliary Serial Port Driver"
 488        help
 489          Say Y here if you want to use the auxiliary serial ports provided
 490          by many modems based on Qualcomm chipsets.  These ports often use
 491          a proprietary protocol called DM and cannot be used for AT- or
 492          PPP-based communication.
 493
 494          To compile this driver as a module, choose M here: the
 495          module will be called qcaux.  If unsure, choose N.
 496
 497config USB_SERIAL_QUALCOMM
 498        tristate "USB Qualcomm Serial modem"
 499        select USB_SERIAL_WWAN
 500        help
 501          Say Y here if you have a Qualcomm USB modem device.  These are
 502          usually wireless cellular modems.
 503
 504          To compile this driver as a module, choose M here: the
 505          module will be called qcserial.
 506
 507config USB_SERIAL_SPCP8X5
 508        tristate "USB SPCP8x5 USB To Serial Driver"
 509        help
 510          Say Y here if you want to use the spcp8x5 converter chip.  This is
 511          commonly found in some Z-Wave USB devices.
 512
 513          To compile this driver as a module, choose M here: the
 514          module will be called spcp8x5.
 515
 516config USB_SERIAL_HP4X
 517        tristate "USB HP4x Calculators support"
 518        help
 519          Say Y here if you want to use an Hewlett-Packard 4x Calculator.
 520
 521          To compile this driver as a module, choose M here: the
 522          module will be called hp4x.
 523
 524config USB_SERIAL_SAFE
 525        tristate "USB Safe Serial (Encapsulated) Driver"
 526
 527config USB_SERIAL_SAFE_PADDED
 528        bool "USB Secure Encapsulated Driver - Padded"
 529        depends on USB_SERIAL_SAFE
 530
 531config USB_SERIAL_SIEMENS_MPI
 532        tristate "USB Siemens MPI driver"
 533        help
 534          Say M here if you want to use a Siemens USB/MPI adapter.
 535
 536          To compile this driver as a module, choose M here: the
 537          module will be called siemens_mpi.
 538
 539config USB_SERIAL_SIERRAWIRELESS
 540        tristate "USB Sierra Wireless Driver"
 541        help
 542          Say M here if you want to use Sierra Wireless devices.
 543
 544          Many devices have a feature known as TRU-Install. For those devices
 545          to work properly, the USB Storage Sierra feature must be enabled.
 546
 547          To compile this driver as a module, choose M here: the
 548          module will be called sierra.
 549
 550config USB_SERIAL_SYMBOL
 551        tristate "USB Symbol Barcode driver (serial mode)"
 552        help
 553          Say Y here if you want to use a Symbol USB Barcode device
 554          in serial emulation mode.
 555
 556          To compile this driver as a module, choose M here: the
 557          module will be called symbolserial.
 558
 559config USB_SERIAL_TI
 560        tristate "USB TI 3410/5052 Serial Driver"
 561        help
 562          Say Y here if you want to use the TI USB 3410 or 5052
 563          serial devices.
 564
 565          To compile this driver as a module, choose M here: the
 566          module will be called ti_usb_3410_5052.
 567
 568config USB_SERIAL_CYBERJACK
 569        tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
 570        ---help---
 571          Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
 572          reader. This is an interface to ISO 7816 compatible contact-based
 573          chipcards, e.g. GSM SIMs.
 574
 575          To compile this driver as a module, choose M here: the
 576          module will be called cyberjack.
 577
 578          If unsure, say N.
 579
 580config USB_SERIAL_XIRCOM
 581        tristate "USB Xircom / Entregra Single Port Serial Driver"
 582        select USB_EZUSB
 583        help
 584          Say Y here if you want to use a Xircom or Entregra single port USB to
 585          serial converter device.  This driver makes use of firmware
 586          developed from scratch by Brian Warner.
 587
 588          To compile this driver as a module, choose M here: the
 589          module will be called keyspan_pda.
 590
 591config USB_SERIAL_WWAN
 592        tristate
 593
 594config USB_SERIAL_OPTION
 595        tristate "USB driver for GSM and CDMA modems"
 596        select USB_SERIAL_WWAN
 597        help
 598          Say Y here if you have a GSM or CDMA modem that's connected to USB.
 599
 600          This driver also supports several PCMCIA cards which have a
 601          built-in OHCI-USB adapter and an internally-connected GSM modem.
 602          The USB bus on these cards is not accessible externally.
 603
 604          Supported devices include (some of?) those made by:
 605          Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
 606
 607          To compile this driver as a module, choose M here: the
 608          module will be called option.
 609
 610          If this driver doesn't recognize your device,
 611          it might be accessible via the FTDI_SIO driver.
 612
 613config USB_SERIAL_OMNINET
 614        tristate "USB ZyXEL omni.net LCD Plus Driver"
 615        help
 616          Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
 617
 618          To compile this driver as a module, choose M here: the
 619          module will be called omninet.
 620
 621config USB_SERIAL_OPTICON
 622        tristate "USB Opticon Barcode driver (serial mode)"
 623        help
 624          Say Y here if you want to use a Opticon USB Barcode device
 625          in serial emulation mode.
 626
 627          To compile this driver as a module, choose M here: the
 628          module will be called opticon.
 629
 630config USB_SERIAL_VIVOPAY_SERIAL
 631        tristate "USB ViVOpay serial interface driver"
 632        help
 633          Say Y here if you want to use a ViVOtech ViVOpay USB device.
 634
 635          To compile this driver as a module, choose M here: the
 636          module will be called vivopay-serial.
 637
 638config USB_SERIAL_ZIO
 639        tristate "ZIO Motherboard USB serial interface driver"
 640        help
 641          Say Y here if you want to use ZIO Motherboard.
 642
 643          To compile this driver as a module, choose M here: the
 644          module will be called zio.
 645
 646config USB_SERIAL_SSU100
 647        tristate "USB Quatech SSU-100 Single Port Serial Driver"
 648        help
 649          Say Y here if you want to use the Quatech SSU-100 single
 650          port usb to serial adapter.
 651
 652          To compile this driver as a module, choose M here: the
 653          module will be called ssu100.
 654
 655config USB_SERIAL_DEBUG
 656        tristate "USB Debugging Device"
 657        help
 658          Say Y here if you have a USB debugging device used to receive
 659          debugging data from another machine.  The most common of these
 660          devices is the NetChip TurboCONNECT device.
 661
 662          To compile this driver as a module, choose M here: the
 663          module will be called usb-debug.
 664
 665endif # USB_SERIAL
 666
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.