linux/drivers/uio/Kconfig
<<
>>
Prefs
   1menuconfig UIO
   2        tristate "Userspace I/O drivers"
   3        depends on MMU
   4        help
   5          Enable this to allow the userspace driver core code to be
   6          built.  This code allows userspace programs easy access to
   7          kernel interrupts and memory locations, allowing some drivers
   8          to be written in userspace.  Note that a small kernel driver
   9          is also required for interrupt handling to work properly.
  10
  11          If you don't know what to do here, say N.
  12
  13if UIO
  14
  15config UIO_CIF
  16        tristate "generic Hilscher CIF Card driver"
  17        depends on PCI
  18        help
  19          Driver for Hilscher CIF DeviceNet and Profibus cards.  This
  20          driver requires a userspace component called cif that handles
  21          all of the heavy lifting and can be found at:
  22                <http://www.osadl.org/projects/downloads/UIO/user/>
  23
  24          To compile this driver as a module, choose M here: the module
  25          will be called uio_cif.
  26
  27config UIO_PDRV_GENIRQ
  28        tristate "Userspace I/O platform driver with generic IRQ handling"
  29        help
  30          Platform driver for Userspace I/O devices, including generic
  31          interrupt handling code. Shared interrupts are not supported.
  32
  33          This kernel driver requires that the matching userspace driver
  34          handles interrupts in a special way. Userspace is responsible
  35          for acknowledging the hardware device if needed, and re-enabling
  36          interrupts in the interrupt controller using the write() syscall.
  37
  38          If you don't know what to do here, say N.
  39
  40config UIO_DMEM_GENIRQ
  41        tristate "Userspace platform driver with generic irq and dynamic memory"
  42        depends on HAS_DMA
  43        help
  44          Platform driver for Userspace I/O devices, including generic
  45          interrupt handling code. Shared interrupts are not supported.
  46
  47          Memory regions can be specified with the same platform device
  48          resources as the UIO_PDRV drivers, but dynamic regions can also
  49          be specified.
  50          The number and size of these regions is static,
  51          but the memory allocation is not performed until
  52          the associated device file is opened. The
  53          memory is freed once the uio device is closed.
  54
  55          If you don't know what to do here, say N.
  56
  57config UIO_AEC
  58        tristate "AEC video timestamp device"
  59        depends on PCI
  60        help
  61
  62          UIO driver for the Adrienne Electronics Corporation PCI time
  63          code device.
  64
  65          This device differs from other UIO devices since it uses I/O
  66          ports instead of memory mapped I/O. In order to make it
  67          possible for UIO to work with this device a utility, uioport,
  68          can be used to read and write the ports:
  69
  70            git clone git://ifup.org/philips/uioport.git
  71
  72          If you compile this as a module, it will be called uio_aec.
  73
  74config UIO_SERCOS3
  75        tristate "Automata Sercos III PCI card driver"
  76        depends on PCI
  77        help
  78          Userspace I/O interface for the Sercos III PCI card from
  79          Automata GmbH. The userspace part of this driver will be
  80          available for download from the Automata GmbH web site.
  81
  82          Automata GmbH:        http://www.automataweb.com
  83          Sercos III interface: http://www.sercos.com
  84
  85          If you compile this as a module, it will be called uio_sercos3.
  86
  87config UIO_PCI_GENERIC
  88        tristate "Generic driver for PCI 2.3 and PCI Express cards"
  89        depends on PCI
  90        help
  91          Generic driver that you can bind, dynamically, to any
  92          PCI 2.3 compliant and PCI Express card. It is useful,
  93          primarily, for virtualization scenarios.
  94          If you compile this as a module, it will be called uio_pci_generic.
  95
  96config UIO_NETX
  97        tristate "Hilscher NetX Card driver"
  98        depends on PCI
  99        help
 100          Driver for Hilscher NetX based fieldbus cards (cifX, comX).
 101          This driver requires a userspace component that comes with the card
 102          or is available from Hilscher (http://www.hilscher.com).
 103
 104          To compile this driver as a module, choose M here; the module
 105          will be called uio_netx.
 106
 107config UIO_PRUSS
 108        tristate "Texas Instruments PRUSS driver"
 109        depends on ARCH_DAVINCI_DA850
 110        select GENERIC_ALLOCATOR
 111        help
 112          PRUSS driver for OMAPL138/DA850/AM18XX devices
 113          PRUSS driver requires user space components, examples and user space
 114          driver is available from below SVN repo - you may use anonymous login
 115
 116          https://gforge.ti.com/gf/project/pru_sw/
 117
 118          More info on API is available at below wiki
 119
 120          http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
 121
 122          To compile this driver as a module, choose M here: the module
 123          will be called uio_pruss.
 124
 125config UIO_MF624
 126        tristate "Humusoft MF624 DAQ PCI card driver"
 127        depends on PCI
 128        help
 129          Userspace I/O interface for the Humusoft MF624 PCI card.
 130          A sample userspace application using this driver is available
 131          (among other MF624 related information and software components)
 132          for download in a git repository:
 133
 134            git clone git://rtime.felk.cvut.cz/mf6xx.git
 135
 136          If you compile this as a module, it will be called uio_mf624.
 137
 138endif
 139
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.