linux/drivers/parport/Kconfig
<<
>>
Prefs
   1#
   2# For a description of the syntax of this configuration file,
   3# see Documentation/kbuild/kconfig-language.txt.
   4#
   5# Parport configuration.
   6#
   7
   8menuconfig PARPORT
   9        tristate "Parallel port support"
  10        depends on HAS_IOMEM
  11        ---help---
  12          If you want to use devices connected to your machine's parallel port
  13          (the connector at the computer with 25 holes), e.g. printer, ZIP
  14          drive, PLIP link (Parallel Line Internet Protocol is mainly used to
  15          create a mini network by connecting the parallel ports of two local
  16          machines) etc., then you need to say Y here; please read
  17          <file:Documentation/parport.txt> and
  18          <file:drivers/parport/BUGS-parport>.
  19
  20          For extensive information about drivers for many devices attaching
  21          to the parallel port see <http://www.torque.net/linux-pp.html> on
  22          the WWW.
  23
  24          It is possible to share a single parallel port among several devices
  25          and it is safe to compile all the corresponding drivers into the
  26          kernel. To compile parallel port support as a module, choose M here:
  27          the module will be called parport.
  28          If you have more than one parallel port and want to specify which
  29          port and IRQ to be used by this driver at module load time, take a
  30          look at <file:Documentation/parport.txt>.
  31
  32          If unsure, say Y.
  33
  34if PARPORT
  35
  36config PARPORT_PC
  37        tristate "PC-style hardware"
  38        depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \
  39                (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \
  40                !XTENSA && !CRIS && !H8300
  41
  42        ---help---
  43          You should say Y here if you have a PC-style parallel port. All
  44          IBM PC compatible computers and some Alphas have PC-style
  45          parallel ports.  PA-RISC owners should only say Y here if they
  46          have a SuperIO parallel port.
  47
  48          To compile this driver as a module, choose M here: the
  49          module will be called parport_pc.
  50
  51          If unsure, say Y.
  52
  53config PARPORT_SERIAL
  54        tristate "Multi-IO cards (parallel and serial)"
  55        depends on SERIAL_8250_PCI && PARPORT_PC && PCI
  56        help
  57          This adds support for multi-IO PCI cards that have parallel and
  58          serial ports.  You should say Y or M here.  If you say M, the module
  59          will be called parport_serial.
  60
  61config PARPORT_PC_FIFO
  62        bool "Use FIFO/DMA if available"
  63        depends on PARPORT_PC
  64        help
  65          Many parallel port chipsets provide hardware that can speed up
  66          printing. Say Y here if you want to take advantage of that.
  67
  68          As well as actually having a FIFO, or DMA capability, the kernel
  69          will need to know which IRQ the parallel port has.  By default,
  70          parallel port interrupts will not be used, and so neither will the
  71          FIFO.  See <file:Documentation/parport.txt> to find out how to
  72          specify which IRQ/DMA to use.
  73
  74config PARPORT_PC_SUPERIO
  75        bool "SuperIO chipset support"
  76        depends on PARPORT_PC && !PARISC
  77        help
  78          Saying Y here enables some probes for Super-IO chipsets in order to
  79          find out things like base addresses, IRQ lines and DMA channels.  It
  80          is safe to say N.
  81
  82config PARPORT_PC_PCMCIA
  83        tristate "Support for PCMCIA management for PC-style ports"
  84        depends on PCMCIA && PARPORT_PC
  85        help
  86          Say Y here if you need PCMCIA support for your PC-style parallel
  87          ports. If unsure, say N.
  88
  89config PARPORT_IP32
  90        tristate "SGI IP32 builtin port"
  91        depends on SGI_IP32
  92        select PARPORT_NOT_PC
  93        help
  94          Say Y here if you need support for the parallel port on
  95          SGI O2 machines. This code is also available as a module (say M),
  96          called parport_ip32.  If in doubt, saying N is the safe plan.
  97
  98config PARPORT_AMIGA
  99        tristate "Amiga builtin port"
 100        depends on AMIGA
 101        select PARPORT_NOT_PC
 102        help
 103          Say Y here if you need support for the parallel port hardware on
 104          Amiga machines. This code is also available as a module (say M),
 105          called parport_amiga. If in doubt, saying N is the safe plan.
 106
 107config PARPORT_MFC3
 108        tristate "Multiface III parallel port"
 109        depends on ZORRO
 110        select PARPORT_NOT_PC
 111        help
 112          Say Y here if you need parallel port support for the MFC3 card.
 113          This code is also available as a module (say M), called
 114          parport_mfc3. If in doubt, saying N is the safe plan.
 115
 116config PARPORT_ATARI
 117        tristate "Atari hardware"
 118        depends on ATARI
 119        select PARPORT_NOT_PC
 120        help
 121          Say Y here if you need support for the parallel port hardware on
 122          Atari machines. This code is also available as a module (say M),
 123          called parport_atari. If in doubt, saying N is the safe plan.
 124
 125config PARPORT_GSC
 126        tristate
 127        default GSC
 128        select PARPORT_NOT_PC
 129
 130config PARPORT_SUNBPP
 131        tristate "Sparc hardware"
 132        depends on SBUS
 133        select PARPORT_NOT_PC
 134        help
 135          This driver provides support for the bidirectional parallel port
 136          found on many Sun machines. Note that many of the newer Ultras
 137          actually have pc style hardware instead.
 138
 139config PARPORT_AX88796
 140        tristate "AX88796 Parallel Port"
 141        select PARPORT_NOT_PC
 142        help
 143          Say Y here if you need support for the parallel port hardware on
 144          the AX88796 network controller chip. This code is also available
 145          as a module (say M), called parport_ax88796.
 146
 147          The driver is not dependent on the AX88796 network driver, and
 148          should not interfere with the networking functions of the chip.
 149
 150config PARPORT_1284
 151        bool "IEEE 1284 transfer modes"
 152        help
 153          If you have a printer that supports status readback or device ID, or
 154          want to use a device that uses enhanced parallel port transfer modes
 155          such as EPP and ECP, say Y here to enable advanced IEEE 1284
 156          transfer modes. Also say Y if you want device ID information to
 157          appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
 158
 159config PARPORT_NOT_PC
 160        bool
 161
 162endif # PARPORT
 163
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.