linux/drivers/hwmon/fschmd.c
<<
>>
Prefs
   1/*
   2 * fschmd.c
   3 *
   4 * Copyright (C) 2007 - 2009 Hans de Goede <hdegoede@redhat.com>
   5 *
   6 * This program is free software; you can redistribute it and/or modify
   7 * it under the terms of the GNU General Public License as published by
   8 * the Free Software Foundation; either version 2 of the License, or
   9 * (at your option) any later version.
  10 *
  11 * This program is distributed in the hope that it will be useful,
  12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 * GNU General Public License for more details.
  15 *
  16 * You should have received a copy of the GNU General Public License
  17 * along with this program; if not, write to the Free Software
  18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19 */
  20
  21/*
  22 *  Merged Fujitsu Siemens hwmon driver, supporting the Poseidon, Hermes,
  23 *  Scylla, Heracles, Heimdall, Hades and Syleus chips
  24 *
  25 *  Based on the original 2.4 fscscy, 2.6 fscpos, 2.6 fscher and 2.6
  26 *  (candidate) fschmd drivers:
  27 *  Copyright (C) 2006 Thilo Cestonaro
  28 *                      <thilo.cestonaro.external@fujitsu-siemens.com>
  29 *  Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
  30 *  Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
  31 *  Copyright (c) 2001 Martin Knoblauch <mkn@teraport.de, knobi@knobisoft.de>
  32 *  Copyright (C) 2000 Hermann Jung <hej@odn.de>
  33 */
  34
  35#include <linux/module.h>
  36#include <linux/init.h>
  37#include <linux/slab.h>
  38#include <linux/jiffies.h>
  39#include <linux/i2c.h>
  40#include <linux/hwmon.h>
  41#include <linux/hwmon-sysfs.h>
  42#include <linux/err.h>
  43#include <linux/mutex.h>
  44#include <linux/sysfs.h>
  45#include <linux/dmi.h>
  46#include <linux/fs.h>
  47#include <linux/watchdog.h>
  48#include <linux/miscdevice.h>
  49#include <linux/uaccess.h>
  50#include <linux/kref.h>
  51
  52/* Addresses to scan */
  53static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
  54
  55/* Insmod parameters */
  56static bool nowayout = WATCHDOG_NOWAYOUT;
  57module_param(nowayout, bool, 0);
  58MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
  59        __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
  60
  61enum chips { fscpos, fscher, fscscy, fschrc, fschmd, fschds, fscsyl };
  62
  63/*
  64 * The FSCHMD registers and other defines
  65 */
  66
  67/* chip identification */
  68#define FSCHMD_REG_IDENT_0              0x00
  69#define FSCHMD_REG_IDENT_1              0x01
  70#define FSCHMD_REG_IDENT_2              0x02
  71#define FSCHMD_REG_REVISION             0x03
  72
  73/* global control and status */
  74#define FSCHMD_REG_EVENT_STATE          0x04
  75#define FSCHMD_REG_CONTROL              0x05
  76
  77#define FSCHMD_CONTROL_ALERT_LED        0x01
  78
  79/* watchdog */
  80static const u8 FSCHMD_REG_WDOG_CONTROL[7] = {
  81        0x21, 0x21, 0x21, 0x21, 0x21, 0x28, 0x28 };
  82static const u8 FSCHMD_REG_WDOG_STATE[7] = {
  83        0x23, 0x23, 0x23, 0x23, 0x23, 0x29, 0x29 };
  84static const u8 FSCHMD_REG_WDOG_PRESET[7] = {
  85        0x28, 0x28, 0x28, 0x28, 0x28, 0x2a, 0x2a };
  86
  87#define FSCHMD_WDOG_CONTROL_TRIGGER     0x10
  88#define FSCHMD_WDOG_CONTROL_STARTED     0x10 /* the same as trigger */
  89#define FSCHMD_WDOG_CONTROL_STOP        0x20
  90#define FSCHMD_WDOG_CONTROL_RESOLUTION  0x40
  91
  92#define FSCHMD_WDOG_STATE_CARDRESET     0x02
  93
  94/* voltages, weird order is to keep the same order as the old drivers */
  95static const u8 FSCHMD_REG_VOLT[7][6] = {
  96        { 0x45, 0x42, 0x48 },                           /* pos */
  97        { 0x45, 0x42, 0x48 },                           /* her */
  98        { 0x45, 0x42, 0x48 },                           /* scy */
  99        { 0x45, 0x42, 0x48 },                           /* hrc */
 100        { 0x45, 0x42, 0x48 },                           /* hmd */
 101        { 0x21, 0x20, 0x22 },                           /* hds */
 102        { 0x21, 0x20, 0x22, 0x23, 0x24, 0x25 },         /* syl */
 103};
 104
 105static const int FSCHMD_NO_VOLT_SENSORS[7] = { 3, 3, 3, 3, 3, 3, 6 };
 106
 107/*
 108 * minimum pwm at which the fan is driven (pwm can by increased depending on
 109 * the temp. Notice that for the scy some fans share there minimum speed.
 110 * Also notice that with the scy the sensor order is different than with the
 111 * other chips, this order was in the 2.4 driver and kept for consistency.
 112 */
 113static const u8 FSCHMD_REG_FAN_MIN[7][7] = {
 114        { 0x55, 0x65 },                                 /* pos */
 115        { 0x55, 0x65, 0xb5 },                           /* her */
 116        { 0x65, 0x65, 0x55, 0xa5, 0x55, 0xa5 },         /* scy */
 117        { 0x55, 0x65, 0xa5, 0xb5 },                     /* hrc */
 118        { 0x55, 0x65, 0xa5, 0xb5, 0xc5 },               /* hmd */
 119        { 0x55, 0x65, 0xa5, 0xb5, 0xc5 },               /* hds */
 120        { 0x54, 0x64, 0x74, 0x84, 0x94, 0xa4, 0xb4 },   /* syl */
 121};
 122
 123/* actual fan speed */
 124static const u8 FSCHMD_REG_FAN_ACT[7][7] = {
 125        { 0x0e, 0x6b, 0xab },                           /* pos */
 126        { 0x0e, 0x6b, 0xbb },                           /* her */
 127        { 0x6b, 0x6c, 0x0e, 0xab, 0x5c, 0xbb },         /* scy */
 128        { 0x0e, 0x6b, 0xab, 0xbb },                     /* hrc */
 129        { 0x5b, 0x6b, 0xab, 0xbb, 0xcb },               /* hmd */
 130        { 0x5b, 0x6b, 0xab, 0xbb, 0xcb },               /* hds */
 131        { 0x57, 0x67, 0x77, 0x87, 0x97, 0xa7, 0xb7 },   /* syl */
 132};
 133
 134/* fan status registers */
 135static const u8 FSCHMD_REG_FAN_STATE[7][7] = {
 136        { 0x0d, 0x62, 0xa2 },                           /* pos */
 137        { 0x0d, 0x62, 0xb2 },                           /* her */
 138        { 0x62, 0x61, 0x0d, 0xa2, 0x52, 0xb2 },         /* scy */
 139        { 0x0d, 0x62, 0xa2, 0xb2 },                     /* hrc */
 140        { 0x52, 0x62, 0xa2, 0xb2, 0xc2 },               /* hmd */
 141        { 0x52, 0x62, 0xa2, 0xb2, 0xc2 },               /* hds */
 142        { 0x50, 0x60, 0x70, 0x80, 0x90, 0xa0, 0xb0 },   /* syl */
 143};
 144
 145/* fan ripple / divider registers */
 146static const u8 FSCHMD_REG_FAN_RIPPLE[7][7] = {
 147        { 0x0f, 0x6f, 0xaf },                           /* pos */
 148        { 0x0f, 0x6f, 0xbf },                           /* her */
 149        { 0x6f, 0x6f, 0x0f, 0xaf, 0x0f, 0xbf },         /* scy */
 150        { 0x0f, 0x6f, 0xaf, 0xbf },                     /* hrc */
 151        { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf },               /* hmd */
 152        { 0x5f, 0x6f, 0xaf, 0xbf, 0xcf },               /* hds */
 153        { 0x56, 0x66, 0x76, 0x86, 0x96, 0xa6, 0xb6 },   /* syl */
 154};
 155
 156static const int FSCHMD_NO_FAN_SENSORS[7] = { 3, 3, 6, 4, 5, 5, 7 };
 157
 158/* Fan status register bitmasks */
 159#define FSCHMD_FAN_ALARM        0x04 /* called fault by FSC! */
 160#define FSCHMD_FAN_NOT_PRESENT  0x08
 161#define FSCHMD_FAN_DISABLED     0x80
 162
 163
 164/* actual temperature registers */
 165static const u8 FSCHMD_REG_TEMP_ACT[7][11] = {
 166        { 0x64, 0x32, 0x35 },                           /* pos */
 167        { 0x64, 0x32, 0x35 },                           /* her */
 168        { 0x64, 0xD0, 0x32, 0x35 },                     /* scy */
 169        { 0x64, 0x32, 0x35 },                           /* hrc */
 170        { 0x70, 0x80, 0x90, 0xd0, 0xe0 },               /* hmd */
 171        { 0x70, 0x80, 0x90, 0xd0, 0xe0 },               /* hds */
 172        { 0x58, 0x68, 0x78, 0x88, 0x98, 0xa8,           /* syl */
 173          0xb8, 0xc8, 0xd8, 0xe8, 0xf8 },
 174};
 175
 176/* temperature state registers */
 177static const u8 FSCHMD_REG_TEMP_STATE[7][11] = {
 178        { 0x71, 0x81, 0x91 },                           /* pos */
 179        { 0x71, 0x81, 0x91 },                           /* her */
 180        { 0x71, 0xd1, 0x81, 0x91 },                     /* scy */
 181        { 0x71, 0x81, 0x91 },                           /* hrc */
 182        { 0x71, 0x81, 0x91, 0xd1, 0xe1 },               /* hmd */
 183        { 0x71, 0x81, 0x91, 0xd1, 0xe1 },               /* hds */
 184        { 0x59, 0x69, 0x79, 0x89, 0x99, 0xa9,           /* syl */
 185          0xb9, 0xc9, 0xd9, 0xe9, 0xf9 },
 186};
 187
 188/*
 189 * temperature high limit registers, FSC does not document these. Proven to be
 190 * there with field testing on the fscher and fschrc, already supported / used
 191 * in the fscscy 2.4 driver. FSC has confirmed that the fschmd has registers
 192 * at these addresses, but doesn't want to confirm they are the same as with
 193 * the fscher??
 194 */
 195static const u8 FSCHMD_REG_TEMP_LIMIT[7][11] = {
 196        { 0, 0, 0 },                                    /* pos */
 197        { 0x76, 0x86, 0x96 },                           /* her */
 198        { 0x76, 0xd6, 0x86, 0x96 },                     /* scy */
 199        { 0x76, 0x86, 0x96 },                           /* hrc */
 200        { 0x76, 0x86, 0x96, 0xd6, 0xe6 },               /* hmd */
 201        { 0x76, 0x86, 0x96, 0xd6, 0xe6 },               /* hds */
 202        { 0x5a, 0x6a, 0x7a, 0x8a, 0x9a, 0xaa,           /* syl */
 203          0xba, 0xca, 0xda, 0xea, 0xfa },
 204};
 205
 206/*
 207 * These were found through experimenting with an fscher, currently they are
 208 * not used, but we keep them around for future reference.
 209 * On the fscsyl AUTOP1 lives at 0x#c (so 0x5c for fan1, 0x6c for fan2, etc),
 210 * AUTOP2 lives at 0x#e, and 0x#1 is a bitmask defining which temps influence
 211 * the fan speed.
 212 * static const u8 FSCHER_REG_TEMP_AUTOP1[] =   { 0x73, 0x83, 0x93 };
 213 * static const u8 FSCHER_REG_TEMP_AUTOP2[] =   { 0x75, 0x85, 0x95 };
 214 */
 215
 216static const int FSCHMD_NO_TEMP_SENSORS[7] = { 3, 3, 4, 3, 5, 5, 11 };
 217
 218/* temp status register bitmasks */
 219#define FSCHMD_TEMP_WORKING     0x01
 220#define FSCHMD_TEMP_ALERT       0x02
 221#define FSCHMD_TEMP_DISABLED    0x80
 222/* there only really is an alarm if the sensor is working and alert == 1 */
 223#define FSCHMD_TEMP_ALARM_MASK \
 224        (FSCHMD_TEMP_WORKING | FSCHMD_TEMP_ALERT)
 225
 226/*
 227 * Functions declarations
 228 */
 229
 230static int fschmd_probe(struct i2c_client *client,
 231                        const struct i2c_device_id *id);
 232static int fschmd_detect(struct i2c_client *client,
 233                         struct i2c_board_info *info);
 234static int fschmd_remove(struct i2c_client *client);
 235static struct fschmd_data *fschmd_update_device(struct device *dev);
 236
 237/*
 238 * Driver data (common to all clients)
 239 */
 240
 241static const struct i2c_device_id fschmd_id[] = {
 242        { "fscpos", fscpos },
 243        { "fscher", fscher },
 244        { "fscscy", fscscy },
 245        { "fschrc", fschrc },
 246        { "fschmd", fschmd },
 247        { "fschds", fschds },
 248        { "fscsyl", fscsyl },
 249        { }
 250};
 251MODULE_DEVICE_TABLE(i2c, fschmd_id);
 252
 253static struct i2c_driver fschmd_driver = {
 254        .class          = I2C_CLASS_HWMON,
 255        .driver = {
 256                .name   = "fschmd",
 257        },
 258        .probe          = fschmd_probe,
 259        .remove         = fschmd_remove,
 260        .id_table       = fschmd_id,
 261        .detect         = fschmd_detect,
 262        .address_list   = normal_i2c,
 263};
 264
 265/*
 266 * Client data (each client gets its own)
 267 */
 268
 269struct fschmd_data {
 270        struct i2c_client *client;
 271        struct device *hwmon_dev;
 272        struct mutex update_lock;
 273        struct mutex watchdog_lock;
 274        struct list_head list; /* member of the watchdog_data_list */
 275        struct kref kref;
 276        struct miscdevice watchdog_miscdev;
 277        enum chips kind;
 278        unsigned long watchdog_is_open;
 279        char watchdog_expect_close;
 280        char watchdog_name[10]; /* must be unique to avoid sysfs conflict */
 281        char valid; /* zero until following fields are valid */
 282        unsigned long last_updated; /* in jiffies */
 283
 284        /* register values */
 285        u8 revision;            /* chip revision */
 286        u8 global_control;      /* global control register */
 287        u8 watchdog_control;    /* watchdog control register */
 288        u8 watchdog_state;      /* watchdog status register */
 289        u8 watchdog_preset;     /* watchdog counter preset on trigger val */
 290        u8 volt[6];             /* voltage */
 291        u8 temp_act[11];        /* temperature */
 292        u8 temp_status[11];     /* status of sensor */
 293        u8 temp_max[11];        /* high temp limit, notice: undocumented! */
 294        u8 fan_act[7];          /* fans revolutions per second */
 295        u8 fan_status[7];       /* fan status */
 296        u8 fan_min[7];          /* fan min value for rps */
 297        u8 fan_ripple[7];       /* divider for rps */
 298};
 299
 300/*
 301 * Global variables to hold information read from special DMI tables, which are
 302 * available on FSC machines with an fscher or later chip. There is no need to
 303 * protect these with a lock as they are only modified from our attach function
 304 * which always gets called with the i2c-core lock held and never accessed
 305 * before the attach function is done with them.
 306 */
 307static int dmi_mult[6] = { 490, 200, 100, 100, 200, 100 };
 308static int dmi_offset[6] = { 0, 0, 0, 0, 0, 0 };
 309static int dmi_vref = -1;
 310
 311/*
 312 * Somewhat ugly :( global data pointer list with all fschmd devices, so that
 313 * we can find our device data as when using misc_register there is no other
 314 * method to get to ones device data from the open fop.
 315 */
 316static LIST_HEAD(watchdog_data_list);
 317/* Note this lock not only protect list access, but also data.kref access */
 318static DEFINE_MUTEX(watchdog_data_mutex);
 319
 320/*
 321 * Release our data struct when we're detached from the i2c client *and* all
 322 * references to our watchdog device are released
 323 */
 324static void fschmd_release_resources(struct kref *ref)
 325{
 326        struct fschmd_data *data = container_of(ref, struct fschmd_data, kref);
 327        kfree(data);
 328}
 329
 330/*
 331 * Sysfs attr show / store functions
 332 */
 333
 334static ssize_t show_in_value(struct device *dev,
 335        struct device_attribute *devattr, char *buf)
 336{
 337        const int max_reading[3] = { 14200, 6600, 3300 };
 338        int index = to_sensor_dev_attr(devattr)->index;
 339        struct fschmd_data *data = fschmd_update_device(dev);
 340
 341        if (data->kind == fscher || data->kind >= fschrc)
 342                return sprintf(buf, "%d\n", (data->volt[index] * dmi_vref *
 343                        dmi_mult[index]) / 255 + dmi_offset[index]);
 344        else
 345                return sprintf(buf, "%d\n", (data->volt[index] *
 346                        max_reading[index] + 128) / 255);
 347}
 348
 349
 350#define TEMP_FROM_REG(val)      (((val) - 128) * 1000)
 351
 352static ssize_t show_temp_value(struct device *dev,
 353        struct device_attribute *devattr, char *buf)
 354{
 355        int index = to_sensor_dev_attr(devattr)->index;
 356        struct fschmd_data *data = fschmd_update_device(dev);
 357
 358        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[index]));
 359}
 360
 361static ssize_t show_temp_max(struct device *dev,
 362        struct device_attribute *devattr, char *buf)
 363{
 364        int index = to_sensor_dev_attr(devattr)->index;
 365        struct fschmd_data *data = fschmd_update_device(dev);
 366
 367        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
 368}
 369
 370static ssize_t store_temp_max(struct device *dev, struct device_attribute
 371        *devattr, const char *buf, size_t count)
 372{
 373        int index = to_sensor_dev_attr(devattr)->index;
 374        struct fschmd_data *data = dev_get_drvdata(dev);
 375        long v;
 376        int err;
 377
 378        err = kstrtol(buf, 10, &v);
 379        if (err)
 380                return err;
 381
 382        v = clamp_val(v / 1000, -128, 127) + 128;
 383
 384        mutex_lock(&data->update_lock);
 385        i2c_smbus_write_byte_data(to_i2c_client(dev),
 386                FSCHMD_REG_TEMP_LIMIT[data->kind][index], v);
 387        data->temp_max[index] = v;
 388        mutex_unlock(&data->update_lock);
 389
 390        return count;
 391}
 392
 393static ssize_t show_temp_fault(struct device *dev,
 394        struct device_attribute *devattr, char *buf)
 395{
 396        int index = to_sensor_dev_attr(devattr)->index;
 397        struct fschmd_data *data = fschmd_update_device(dev);
 398
 399        /* bit 0 set means sensor working ok, so no fault! */
 400        if (data->temp_status[index] & FSCHMD_TEMP_WORKING)
 401                return sprintf(buf, "0\n");
 402        else
 403                return sprintf(buf, "1\n");
 404}
 405
 406static ssize_t show_temp_alarm(struct device *dev,
 407        struct device_attribute *devattr, char *buf)
 408{
 409        int index = to_sensor_dev_attr(devattr)->index;
 410        struct fschmd_data *data = fschmd_update_device(dev);
 411
 412        if ((data->temp_status[index] & FSCHMD_TEMP_ALARM_MASK) ==
 413                        FSCHMD_TEMP_ALARM_MASK)
 414                return sprintf(buf, "1\n");
 415        else
 416                return sprintf(buf, "0\n");
 417}
 418
 419
 420#define RPM_FROM_REG(val)       ((val) * 60)
 421
 422static ssize_t show_fan_value(struct device *dev,
 423        struct device_attribute *devattr, char *buf)
 424{
 425        int index = to_sensor_dev_attr(devattr)->index;
 426        struct fschmd_data *data = fschmd_update_device(dev);
 427
 428        return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[index]));
 429}
 430
 431static ssize_t show_fan_div(struct device *dev,
 432        struct device_attribute *devattr, char *buf)
 433{
 434        int index = to_sensor_dev_attr(devattr)->index;
 435        struct fschmd_data *data = fschmd_update_device(dev);
 436
 437        /* bits 2..7 reserved => mask with 3 */
 438        return sprintf(buf, "%d\n", 1 << (data->fan_ripple[index] & 3));
 439}
 440
 441static ssize_t store_fan_div(struct device *dev, struct device_attribute
 442        *devattr, const char *buf, size_t count)
 443{
 444        u8 reg;
 445        int index = to_sensor_dev_attr(devattr)->index;
 446        struct fschmd_data *data = dev_get_drvdata(dev);
 447        /* supported values: 2, 4, 8 */
 448        unsigned long v;
 449        int err;
 450
 451        err = kstrtoul(buf, 10, &v);
 452        if (err)
 453                return err;
 454
 455        switch (v) {
 456        case 2:
 457                v = 1;
 458                break;
 459        case 4:
 460                v = 2;
 461                break;
 462        case 8:
 463                v = 3;
 464                break;
 465        default:
 466                dev_err(dev,
 467                        "fan_div value %lu not supported. Choose one of 2, 4 or 8!\n",
 468                        v);
 469                return -EINVAL;
 470        }
 471
 472        mutex_lock(&data->update_lock);
 473
 474        reg = i2c_smbus_read_byte_data(to_i2c_client(dev),
 475                FSCHMD_REG_FAN_RIPPLE[data->kind][index]);
 476
 477        /* bits 2..7 reserved => mask with 0x03 */
 478        reg &= ~0x03;
 479        reg |= v;
 480
 481        i2c_smbus_write_byte_data(to_i2c_client(dev),
 482                FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg);
 483
 484        data->fan_ripple[index] = reg;
 485
 486        mutex_unlock(&data->update_lock);
 487
 488        return count;
 489}
 490
 491static ssize_t show_fan_alarm(struct device *dev,
 492        struct device_attribute *devattr, char *buf)
 493{
 494        int index = to_sensor_dev_attr(devattr)->index;
 495        struct fschmd_data *data = fschmd_update_device(dev);
 496
 497        if (data->fan_status[index] & FSCHMD_FAN_ALARM)
 498                return sprintf(buf, "1\n");
 499        else
 500                return sprintf(buf, "0\n");
 501}
 502
 503static ssize_t show_fan_fault(struct device *dev,
 504        struct device_attribute *devattr, char *buf)
 505{
 506        int index = to_sensor_dev_attr(devattr)->index;
 507        struct fschmd_data *data = fschmd_update_device(dev);
 508
 509        if (data->fan_status[index] & FSCHMD_FAN_NOT_PRESENT)
 510                return sprintf(buf, "1\n");
 511        else
 512                return sprintf(buf, "0\n");
 513}
 514
 515
 516static ssize_t show_pwm_auto_point1_pwm(struct device *dev,
 517        struct device_attribute *devattr, char *buf)
 518{
 519        int index = to_sensor_dev_attr(devattr)->index;
 520        struct fschmd_data *data = fschmd_update_device(dev);
 521        int val = data->fan_min[index];
 522
 523        /* 0 = allow turning off (except on the syl), 1-255 = 50-100% */
 524        if (val || data->kind == fscsyl)
 525                val = val / 2 + 128;
 526
 527        return sprintf(buf, "%d\n", val);
 528}
 529
 530static ssize_t store_pwm_auto_point1_pwm(struct device *dev,
 531        struct device_attribute *devattr, const char *buf, size_t count)
 532{
 533        int index = to_sensor_dev_attr(devattr)->index;
 534        struct fschmd_data *data = dev_get_drvdata(dev);
 535        unsigned long v;
 536        int err;
 537
 538        err = kstrtoul(buf, 10, &v);
 539        if (err)
 540                return err;
 541
 542        /* reg: 0 = allow turning off (except on the syl), 1-255 = 50-100% */
 543        if (v || data->kind == fscsyl) {
 544                v = clamp_val(v, 128, 255);
 545                v = (v - 128) * 2 + 1;
 546        }
 547
 548        mutex_lock(&data->update_lock);
 549
 550        i2c_smbus_write_byte_data(to_i2c_client(dev),
 551                FSCHMD_REG_FAN_MIN[data->kind][index], v);
 552        data->fan_min[index] = v;
 553
 554        mutex_unlock(&data->update_lock);
 555
 556        return count;
 557}
 558
 559
 560/*
 561 * The FSC hwmon family has the ability to force an attached alert led to flash
 562 * from software, we export this as an alert_led sysfs attr
 563 */
 564static ssize_t show_alert_led(struct device *dev,
 565        struct device_attribute *devattr, char *buf)
 566{
 567        struct fschmd_data *data = fschmd_update_device(dev);
 568
 569        if (data->global_control & FSCHMD_CONTROL_ALERT_LED)
 570                return sprintf(buf, "1\n");
 571        else
 572                return sprintf(buf, "0\n");
 573}
 574
 575static ssize_t store_alert_led(struct device *dev,
 576        struct device_attribute *devattr, const char *buf, size_t count)
 577{
 578        u8 reg;
 579        struct fschmd_data *data = dev_get_drvdata(dev);
 580        unsigned long v;
 581        int err;
 582
 583        err = kstrtoul(buf, 10, &v);
 584        if (err)
 585                return err;
 586
 587        mutex_lock(&data->update_lock);
 588
 589        reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL);
 590
 591        if (v)
 592                reg |= FSCHMD_CONTROL_ALERT_LED;
 593        else
 594                reg &= ~FSCHMD_CONTROL_ALERT_LED;
 595
 596        i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg);
 597
 598        data->global_control = reg;
 599
 600        mutex_unlock(&data->update_lock);
 601
 602        return count;
 603}
 604
 605static DEVICE_ATTR(alert_led, 0644, show_alert_led, store_alert_led);
 606
 607static struct sensor_device_attribute fschmd_attr[] = {
 608        SENSOR_ATTR(in0_input, 0444, show_in_value, NULL, 0),
 609        SENSOR_ATTR(in1_input, 0444, show_in_value, NULL, 1),
 610        SENSOR_ATTR(in2_input, 0444, show_in_value, NULL, 2),
 611        SENSOR_ATTR(in3_input, 0444, show_in_value, NULL, 3),
 612        SENSOR_ATTR(in4_input, 0444, show_in_value, NULL, 4),
 613        SENSOR_ATTR(in5_input, 0444, show_in_value, NULL, 5),
 614};
 615
 616static struct sensor_device_attribute fschmd_temp_attr[] = {
 617        SENSOR_ATTR(temp1_input, 0444, show_temp_value, NULL, 0),
 618        SENSOR_ATTR(temp1_max,   0644, show_temp_max, store_temp_max, 0),
 619        SENSOR_ATTR(temp1_fault, 0444, show_temp_fault, NULL, 0),
 620        SENSOR_ATTR(temp1_alarm, 0444, show_temp_alarm, NULL, 0),
 621        SENSOR_ATTR(temp2_input, 0444, show_temp_value, NULL, 1),
 622        SENSOR_ATTR(temp2_max,   0644, show_temp_max, store_temp_max, 1),
 623        SENSOR_ATTR(temp2_fault, 0444, show_temp_fault, NULL, 1),
 624        SENSOR_ATTR(temp2_alarm, 0444, show_temp_alarm, NULL, 1),
 625        SENSOR_ATTR(temp3_input, 0444, show_temp_value, NULL, 2),
 626        SENSOR_ATTR(temp3_max,   0644, show_temp_max, store_temp_max, 2),
 627        SENSOR_ATTR(temp3_fault, 0444, show_temp_fault, NULL, 2),
 628        SENSOR_ATTR(temp3_alarm, 0444, show_temp_alarm, NULL, 2),
 629        SENSOR_ATTR(temp4_input, 0444, show_temp_value, NULL, 3),
 630        SENSOR_ATTR(temp4_max,   0644, show_temp_max, store_temp_max, 3),
 631        SENSOR_ATTR(temp4_fault, 0444, show_temp_fault, NULL, 3),
 632        SENSOR_ATTR(temp4_alarm, 0444, show_temp_alarm, NULL, 3),
 633        SENSOR_ATTR(temp5_input, 0444, show_temp_value, NULL, 4),
 634        SENSOR_ATTR(temp5_max,   0644, show_temp_max, store_temp_max, 4),
 635        SENSOR_ATTR(temp5_fault, 0444, show_temp_fault, NULL, 4),
 636        SENSOR_ATTR(temp5_alarm, 0444, show_temp_alarm, NULL, 4),
 637        SENSOR_ATTR(temp6_input, 0444, show_temp_value, NULL, 5),
 638        SENSOR_ATTR(temp6_max,   0644, show_temp_max, store_temp_max, 5),
 639        SENSOR_ATTR(temp6_fault, 0444, show_temp_fault, NULL, 5),
 640        SENSOR_ATTR(temp6_alarm, 0444, show_temp_alarm, NULL, 5),
 641        SENSOR_ATTR(temp7_input, 0444, show_temp_value, NULL, 6),
 642        SENSOR_ATTR(temp7_max,   0644, show_temp_max, store_temp_max, 6),
 643        SENSOR_ATTR(temp7_fault, 0444, show_temp_fault, NULL, 6),
 644        SENSOR_ATTR(temp7_alarm, 0444, show_temp_alarm, NULL, 6),
 645        SENSOR_ATTR(temp8_input, 0444, show_temp_value, NULL, 7),
 646        SENSOR_ATTR(temp8_max,   0644, show_temp_max, store_temp_max, 7),
 647        SENSOR_ATTR(temp8_fault, 0444, show_temp_fault, NULL, 7),
 648        SENSOR_ATTR(temp8_alarm, 0444, show_temp_alarm, NULL, 7),
 649        SENSOR_ATTR(temp9_input, 0444, show_temp_value, NULL, 8),
 650        SENSOR_ATTR(temp9_max,   0644, show_temp_max, store_temp_max, 8),
 651        SENSOR_ATTR(temp9_fault, 0444, show_temp_fault, NULL, 8),
 652        SENSOR_ATTR(temp9_alarm, 0444, show_temp_alarm, NULL, 8),
 653        SENSOR_ATTR(temp10_input, 0444, show_temp_value, NULL, 9),
 654        SENSOR_ATTR(temp10_max,   0644, show_temp_max, store_temp_max, 9),
 655        SENSOR_ATTR(temp10_fault, 0444, show_temp_fault, NULL, 9),
 656        SENSOR_ATTR(temp10_alarm, 0444, show_temp_alarm, NULL, 9),
 657        SENSOR_ATTR(temp11_input, 0444, show_temp_value, NULL, 10),
 658        SENSOR_ATTR(temp11_max,   0644, show_temp_max, store_temp_max, 10),
 659        SENSOR_ATTR(temp11_fault, 0444, show_temp_fault, NULL, 10),
 660        SENSOR_ATTR(temp11_alarm, 0444, show_temp_alarm, NULL, 10),
 661};
 662
 663static struct sensor_device_attribute fschmd_fan_attr[] = {
 664        SENSOR_ATTR(fan1_input, 0444, show_fan_value, NULL, 0),
 665        SENSOR_ATTR(fan1_div,   0644, show_fan_div, store_fan_div, 0),
 666        SENSOR_ATTR(fan1_alarm, 0444, show_fan_alarm, NULL, 0),
 667        SENSOR_ATTR(fan1_fault, 0444, show_fan_fault, NULL, 0),
 668        SENSOR_ATTR(pwm1_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 669                store_pwm_auto_point1_pwm, 0),
 670        SENSOR_ATTR(fan2_input, 0444, show_fan_value, NULL, 1),
 671        SENSOR_ATTR(fan2_div,   0644, show_fan_div, store_fan_div, 1),
 672        SENSOR_ATTR(fan2_alarm, 0444, show_fan_alarm, NULL, 1),
 673        SENSOR_ATTR(fan2_fault, 0444, show_fan_fault, NULL, 1),
 674        SENSOR_ATTR(pwm2_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 675                store_pwm_auto_point1_pwm, 1),
 676        SENSOR_ATTR(fan3_input, 0444, show_fan_value, NULL, 2),
 677        SENSOR_ATTR(fan3_div,   0644, show_fan_div, store_fan_div, 2),
 678        SENSOR_ATTR(fan3_alarm, 0444, show_fan_alarm, NULL, 2),
 679        SENSOR_ATTR(fan3_fault, 0444, show_fan_fault, NULL, 2),
 680        SENSOR_ATTR(pwm3_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 681                store_pwm_auto_point1_pwm, 2),
 682        SENSOR_ATTR(fan4_input, 0444, show_fan_value, NULL, 3),
 683        SENSOR_ATTR(fan4_div,   0644, show_fan_div, store_fan_div, 3),
 684        SENSOR_ATTR(fan4_alarm, 0444, show_fan_alarm, NULL, 3),
 685        SENSOR_ATTR(fan4_fault, 0444, show_fan_fault, NULL, 3),
 686        SENSOR_ATTR(pwm4_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 687                store_pwm_auto_point1_pwm, 3),
 688        SENSOR_ATTR(fan5_input, 0444, show_fan_value, NULL, 4),
 689        SENSOR_ATTR(fan5_div,   0644, show_fan_div, store_fan_div, 4),
 690        SENSOR_ATTR(fan5_alarm, 0444, show_fan_alarm, NULL, 4),
 691        SENSOR_ATTR(fan5_fault, 0444, show_fan_fault, NULL, 4),
 692        SENSOR_ATTR(pwm5_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 693                store_pwm_auto_point1_pwm, 4),
 694        SENSOR_ATTR(fan6_input, 0444, show_fan_value, NULL, 5),
 695        SENSOR_ATTR(fan6_div,   0644, show_fan_div, store_fan_div, 5),
 696        SENSOR_ATTR(fan6_alarm, 0444, show_fan_alarm, NULL, 5),
 697        SENSOR_ATTR(fan6_fault, 0444, show_fan_fault, NULL, 5),
 698        SENSOR_ATTR(pwm6_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 699                store_pwm_auto_point1_pwm, 5),
 700        SENSOR_ATTR(fan7_input, 0444, show_fan_value, NULL, 6),
 701        SENSOR_ATTR(fan7_div,   0644, show_fan_div, store_fan_div, 6),
 702        SENSOR_ATTR(fan7_alarm, 0444, show_fan_alarm, NULL, 6),
 703        SENSOR_ATTR(fan7_fault, 0444, show_fan_fault, NULL, 6),
 704        SENSOR_ATTR(pwm7_auto_point1_pwm, 0644, show_pwm_auto_point1_pwm,
 705                store_pwm_auto_point1_pwm, 6),
 706};
 707
 708
 709/*
 710 * Watchdog routines
 711 */
 712
 713static int watchdog_set_timeout(struct fschmd_data *data, int timeout)
 714{
 715        int ret, resolution;
 716        int kind = data->kind + 1; /* 0-x array index -> 1-x module param */
 717
 718        /* 2 second or 60 second resolution? */
 719        if (timeout <= 510 || kind == fscpos || kind == fscscy)
 720                resolution = 2;
 721        else
 722                resolution = 60;
 723
 724        if (timeout < resolution || timeout > (resolution * 255))
 725                return -EINVAL;
 726
 727        mutex_lock(&data->watchdog_lock);
 728        if (!data->client) {
 729                ret = -ENODEV;
 730                goto leave;
 731        }
 732
 733        if (resolution == 2)
 734                data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_RESOLUTION;
 735        else
 736                data->watchdog_control |= FSCHMD_WDOG_CONTROL_RESOLUTION;
 737
 738        data->watchdog_preset = DIV_ROUND_UP(timeout, resolution);
 739
 740        /* Write new timeout value */
 741        i2c_smbus_write_byte_data(data->client,
 742                FSCHMD_REG_WDOG_PRESET[data->kind], data->watchdog_preset);
 743        /* Write new control register, do not trigger! */
 744        i2c_smbus_write_byte_data(data->client,
 745                FSCHMD_REG_WDOG_CONTROL[data->kind],
 746                data->watchdog_control & ~FSCHMD_WDOG_CONTROL_TRIGGER);
 747
 748        ret = data->watchdog_preset * resolution;
 749
 750leave:
 751        mutex_unlock(&data->watchdog_lock);
 752        return ret;
 753}
 754
 755static int watchdog_get_timeout(struct fschmd_data *data)
 756{
 757        int timeout;
 758
 759        mutex_lock(&data->watchdog_lock);
 760        if (data->watchdog_control & FSCHMD_WDOG_CONTROL_RESOLUTION)
 761                timeout = data->watchdog_preset * 60;
 762        else
 763                timeout = data->watchdog_preset * 2;
 764        mutex_unlock(&data->watchdog_lock);
 765
 766        return timeout;
 767}
 768
 769static int watchdog_trigger(struct fschmd_data *data)
 770{
 771        int ret = 0;
 772
 773        mutex_lock(&data->watchdog_lock);
 774        if (!data->client) {
 775                ret = -ENODEV;
 776                goto leave;
 777        }
 778
 779        data->watchdog_control |= FSCHMD_WDOG_CONTROL_TRIGGER;
 780        i2c_smbus_write_byte_data(data->client,
 781                                  FSCHMD_REG_WDOG_CONTROL[data->kind],
 782                                  data->watchdog_control);
 783leave:
 784        mutex_unlock(&data->watchdog_lock);
 785        return ret;
 786}
 787
 788static int watchdog_stop(struct fschmd_data *data)
 789{
 790        int ret = 0;
 791
 792        mutex_lock(&data->watchdog_lock);
 793        if (!data->client) {
 794                ret = -ENODEV;
 795                goto leave;
 796        }
 797
 798        data->watchdog_control &= ~FSCHMD_WDOG_CONTROL_STARTED;
 799        /*
 800         * Don't store the stop flag in our watchdog control register copy, as
 801         * its a write only bit (read always returns 0)
 802         */
 803        i2c_smbus_write_byte_data(data->client,
 804                FSCHMD_REG_WDOG_CONTROL[data->kind],
 805                data->watchdog_control | FSCHMD_WDOG_CONTROL_STOP);
 806leave:
 807        mutex_unlock(&data->watchdog_lock);
 808        return ret;
 809}
 810
 811static int watchdog_open(struct inode *inode, struct file *filp)
 812{
 813        struct fschmd_data *pos, *data = NULL;
 814        int watchdog_is_open;
 815
 816        /*
 817         * We get called from drivers/char/misc.c with misc_mtx hold, and we
 818         * call misc_register() from fschmd_probe() with watchdog_data_mutex
 819         * hold, as misc_register() takes the misc_mtx lock, this is a possible
 820         * deadlock, so we use mutex_trylock here.
 821         */
 822        if (!mutex_trylock(&watchdog_data_mutex))
 823                return -ERESTARTSYS;
 824        list_for_each_entry(pos, &watchdog_data_list, list) {
 825                if (pos->watchdog_miscdev.minor == iminor(inode)) {
 826                        data = pos;
 827                        break;
 828                }
 829        }
 830        /* Note we can never not have found data, so we don't check for this */
 831        watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open);
 832        if (!watchdog_is_open)
 833                kref_get(&data->kref);
 834        mutex_unlock(&watchdog_data_mutex);
 835
 836        if (watchdog_is_open)
 837                return -EBUSY;
 838
 839        /* Start the watchdog */
 840        watchdog_trigger(data);
 841        filp->private_data = data;
 842
 843        return nonseekable_open(inode, filp);
 844}
 845
 846static int watchdog_release(struct inode *inode, struct file *filp)
 847{
 848        struct fschmd_data *data = filp->private_data;
 849
 850        if (data->watchdog_expect_close) {
 851                watchdog_stop(data);
 852                data->watchdog_expect_close = 0;
 853        } else {
 854                watchdog_trigger(data);
 855                dev_crit(&data->client->dev,
 856                        "unexpected close, not stopping watchdog!\n");
 857        }
 858
 859        clear_bit(0, &data->watchdog_is_open);
 860
 861        mutex_lock(&watchdog_data_mutex);
 862        kref_put(&data->kref, fschmd_release_resources);
 863        mutex_unlock(&watchdog_data_mutex);
 864
 865        return 0;
 866}
 867
 868static ssize_t watchdog_write(struct file *filp, const char __user *buf,
 869        size_t count, loff_t *offset)
 870{
 871        int ret;
 872        struct fschmd_data *data = filp->private_data;
 873
 874        if (count) {
 875                if (!nowayout) {
 876                        size_t i;
 877
 878                        /* Clear it in case it was set with a previous write */
 879                        data->watchdog_expect_close = 0;
 880
 881                        for (i = 0; i != count; i++) {
 882                                char c;
 883                                if (get_user(c, buf + i))
 884                                        return -EFAULT;
 885                                if (c == 'V')
 886                                        data->watchdog_expect_close = 1;
 887                        }
 888                }
 889                ret = watchdog_trigger(data);
 890                if (ret < 0)
 891                        return ret;
 892        }
 893        return count;
 894}
 895
 896static long watchdog_ioctl(struct file *filp, unsigned int cmd,
 897                           unsigned long arg)
 898{
 899        struct watchdog_info ident = {
 900                .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
 901                                WDIOF_CARDRESET,
 902                .identity = "FSC watchdog"
 903        };
 904        int i, ret = 0;
 905        struct fschmd_data *data = filp->private_data;
 906
 907        switch (cmd) {
 908        case WDIOC_GETSUPPORT:
 909                ident.firmware_version = data->revision;
 910                if (!nowayout)
 911                        ident.options |= WDIOF_MAGICCLOSE;
 912                if (copy_to_user((void __user *)arg, &ident, sizeof(ident)))
 913                        ret = -EFAULT;
 914                break;
 915
 916        case WDIOC_GETSTATUS:
 917                ret = put_user(0, (int __user *)arg);
 918                break;
 919
 920        case WDIOC_GETBOOTSTATUS:
 921                if (data->watchdog_state & FSCHMD_WDOG_STATE_CARDRESET)
 922                        ret = put_user(WDIOF_CARDRESET, (int __user *)arg);
 923                else
 924                        ret = put_user(0, (int __user *)arg);
 925                break;
 926
 927        case WDIOC_KEEPALIVE:
 928                ret = watchdog_trigger(data);
 929                break;
 930
 931        case WDIOC_GETTIMEOUT:
 932                i = watchdog_get_timeout(data);
 933                ret = put_user(i, (int __user *)arg);
 934                break;
 935
 936        case WDIOC_SETTIMEOUT:
 937                if (get_user(i, (int __user *)arg)) {
 938                        ret = -EFAULT;
 939                        break;
 940                }
 941                ret = watchdog_set_timeout(data, i);
 942                if (ret > 0)
 943                        ret = put_user(ret, (int __user *)arg);
 944                break;
 945
 946        case WDIOC_SETOPTIONS:
 947                if (get_user(i, (int __user *)arg)) {
 948                        ret = -EFAULT;
 949                        break;
 950                }
 951
 952                if (i & WDIOS_DISABLECARD)
 953                        ret = watchdog_stop(data);
 954                else if (i & WDIOS_ENABLECARD)
 955                        ret = watchdog_trigger(data);
 956                else
 957                        ret = -EINVAL;
 958
 959                break;
 960        default:
 961                ret = -ENOTTY;
 962        }
 963        return ret;
 964}
 965
 966static const struct file_operations watchdog_fops = {
 967        .owner = THIS_MODULE,
 968        .llseek = no_llseek,
 969        .open = watchdog_open,
 970        .release = watchdog_release,
 971        .write = watchdog_write,
 972        .unlocked_ioctl = watchdog_ioctl,
 973};
 974
 975
 976/*
 977 * Detect, register, unregister and update device functions
 978 */
 979
 980/*
 981 * DMI decode routine to read voltage scaling factors from special DMI tables,
 982 * which are available on FSC machines with an fscher or later chip.
 983 */
 984static void fschmd_dmi_decode(const struct dmi_header *header, void *dummy)
 985{
 986        int i, mult[3] = { 0 }, offset[3] = { 0 }, vref = 0, found = 0;
 987
 988        /*
 989         * dmi code ugliness, we get passed the address of the contents of
 990         * a complete DMI record, but in the form of a dmi_header pointer, in
 991         * reality this address holds header->length bytes of which the header
 992         * are the first 4 bytes
 993         */
 994        u8 *dmi_data = (u8 *)header;
 995
 996        /* We are looking for OEM-specific type 185 */
 997        if (header->type != 185)
 998                return;
 999
1000        /*
1001         * we are looking for what Siemens calls "subtype" 19, the subtype
1002         * is stored in byte 5 of the dmi block
1003         */
1004        if (header->length < 5 || dmi_data[4] != 19)
1005                return;
1006
1007        /*
1008         * After the subtype comes 1 unknown byte and then blocks of 5 bytes,
1009         * consisting of what Siemens calls an "Entity" number, followed by
1010         * 2 16-bit words in LSB first order
1011         */
1012        for (i = 6; (i + 4) < header->length; i += 5) {
1013                /* entity 1 - 3: voltage multiplier and offset */
1014                if (dmi_data[i] >= 1 && dmi_data[i] <= 3) {
1015                        /* Our in sensors order and the DMI order differ */
1016                        const int shuffle[3] = { 1, 0, 2 };
1017                        int in = shuffle[dmi_data[i] - 1];
1018
1019                        /* Check for twice the same entity */
1020                        if (found & (1 << in))
1021                                return;
1022
1023                        mult[in] = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
1024                        offset[in] = dmi_data[i + 3] | (dmi_data[i + 4] << 8);
1025
1026                        found |= 1 << in;
1027                }
1028
1029                /* entity 7: reference voltage */
1030                if (dmi_data[i] == 7) {
1031                        /* Check for twice the same entity */
1032                        if (found & 0x08)
1033                                return;
1034
1035                        vref = dmi_data[i + 1] | (dmi_data[i + 2] << 8);
1036
1037                        found |= 0x08;
1038                }
1039        }
1040
1041        if (found == 0x0F) {
1042                for (i = 0; i < 3; i++) {
1043                        dmi_mult[i] = mult[i] * 10;
1044                        dmi_offset[i] = offset[i] * 10;
1045                }
1046                /*
1047                 * According to the docs there should be separate dmi entries
1048                 * for the mult's and offsets of in3-5 of the syl, but on
1049                 * my test machine these are not present
1050                 */
1051                dmi_mult[3] = dmi_mult[2];
1052                dmi_mult[4] = dmi_mult[1];
1053                dmi_mult[5] = dmi_mult[2];
1054                dmi_offset[3] = dmi_offset[2];
1055                dmi_offset[4] = dmi_offset[1];
1056                dmi_offset[5] = dmi_offset[2];
1057                dmi_vref = vref;
1058        }
1059}
1060
1061static int fschmd_detect(struct i2c_client *client,
1062                         struct i2c_board_info *info)
1063{
1064        enum chips kind;
1065        struct i2c_adapter *adapter = client->adapter;
1066        char id[4];
1067
1068        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1069                return -ENODEV;
1070
1071        /* Detect & Identify the chip */
1072        id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
1073        id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
1074        id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
1075        id[3] = '\0';
1076
1077        if (!strcmp(id, "PEG"))
1078                kind = fscpos;
1079        else if (!strcmp(id, "HER"))
1080                kind = fscher;
1081        else if (!strcmp(id, "SCY"))
1082                kind = fscscy;
1083        else if (!strcmp(id, "HRC"))
1084                kind = fschrc;
1085        else if (!strcmp(id, "HMD"))
1086                kind = fschmd;
1087        else if (!strcmp(id, "HDS"))
1088                kind = fschds;
1089        else if (!strcmp(id, "SYL"))
1090                kind = fscsyl;
1091        else
1092                return -ENODEV;
1093
1094        strlcpy(info->type, fschmd_id[kind].name, I2C_NAME_SIZE);
1095
1096        return 0;
1097}
1098
1099static int fschmd_probe(struct i2c_client *client,
1100                        const struct i2c_device_id *id)
1101{
1102        struct fschmd_data *data;
1103        const char * const names[7] = { "Poseidon", "Hermes", "Scylla",
1104                                "Heracles", "Heimdall", "Hades", "Syleus" };
1105        const int watchdog_minors[] = { WATCHDOG_MINOR, 212, 213, 214, 215 };
1106        int i, err;
1107        enum chips kind = id->driver_data;
1108
1109        data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL);
1110        if (!data)
1111                return -ENOMEM;
1112
1113        i2c_set_clientdata(client, data);
1114        mutex_init(&data->update_lock);
1115        mutex_init(&data->watchdog_lock);
1116        INIT_LIST_HEAD(&data->list);
1117        kref_init(&data->kref);
1118        /*
1119         * Store client pointer in our data struct for watchdog usage
1120         * (where the client is found through a data ptr instead of the
1121         * otherway around)
1122         */
1123        data->client = client;
1124        data->kind = kind;
1125
1126        if (kind == fscpos) {
1127                /*
1128                 * The Poseidon has hardwired temp limits, fill these
1129                 * in for the alarm resetting code
1130                 */
1131                data->temp_max[0] = 70 + 128;
1132                data->temp_max[1] = 50 + 128;
1133                data->temp_max[2] = 50 + 128;
1134        }
1135
1136        /* Read the special DMI table for fscher and newer chips */
1137        if ((kind == fscher || kind >= fschrc) && dmi_vref == -1) {
1138                dmi_walk(fschmd_dmi_decode, NULL);
1139                if (dmi_vref == -1) {
1140                        dev_warn(&client->dev,
1141                                "Couldn't get voltage scaling factors from "
1142                                "BIOS DMI table, using builtin defaults\n");
1143                        dmi_vref = 33;
1144                }
1145        }
1146
1147        /* Read in some never changing registers */
1148        data->revision = i2c_smbus_read_byte_data(client, FSCHMD_REG_REVISION);
1149        data->global_control = i2c_smbus_read_byte_data(client,
1150                                        FSCHMD_REG_CONTROL);
1151        data->watchdog_control = i2c_smbus_read_byte_data(client,
1152                                        FSCHMD_REG_WDOG_CONTROL[data->kind]);
1153        data->watchdog_state = i2c_smbus_read_byte_data(client,
1154                                        FSCHMD_REG_WDOG_STATE[data->kind]);
1155        data->watchdog_preset = i2c_smbus_read_byte_data(client,
1156                                        FSCHMD_REG_WDOG_PRESET[data->kind]);
1157
1158        err = device_create_file(&client->dev, &dev_attr_alert_led);
1159        if (err)
1160                goto exit_detach;
1161
1162        for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++) {
1163                err = device_create_file(&client->dev,
1164                                        &fschmd_attr[i].dev_attr);
1165                if (err)
1166                        goto exit_detach;
1167        }
1168
1169        for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++) {
1170                /* Poseidon doesn't have TEMP_LIMIT registers */
1171                if (kind == fscpos && fschmd_temp_attr[i].dev_attr.show ==
1172                                show_temp_max)
1173                        continue;
1174
1175                if (kind == fscsyl) {
1176                        if (i % 4 == 0)
1177                                data->temp_status[i / 4] =
1178                                        i2c_smbus_read_byte_data(client,
1179                                                FSCHMD_REG_TEMP_STATE
1180                                                [data->kind][i / 4]);
1181                        if (data->temp_status[i / 4] & FSCHMD_TEMP_DISABLED)
1182                                continue;
1183                }
1184
1185                err = device_create_file(&client->dev,
1186                                        &fschmd_temp_attr[i].dev_attr);
1187                if (err)
1188                        goto exit_detach;
1189        }
1190
1191        for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++) {
1192                /* Poseidon doesn't have a FAN_MIN register for its 3rd fan */
1193                if (kind == fscpos &&
1194                                !strcmp(fschmd_fan_attr[i].dev_attr.attr.name,
1195                                        "pwm3_auto_point1_pwm"))
1196                        continue;
1197
1198                if (kind == fscsyl) {
1199                        if (i % 5 == 0)
1200                                data->fan_status[i / 5] =
1201                                        i2c_smbus_read_byte_data(client,
1202                                                FSCHMD_REG_FAN_STATE
1203                                                [data->kind][i / 5]);
1204                        if (data->fan_status[i / 5] & FSCHMD_FAN_DISABLED)
1205                                continue;
1206                }
1207
1208                err = device_create_file(&client->dev,
1209                                        &fschmd_fan_attr[i].dev_attr);
1210                if (err)
1211                        goto exit_detach;
1212        }
1213
1214        data->hwmon_dev = hwmon_device_register(&client->dev);
1215        if (IS_ERR(data->hwmon_dev)) {
1216                err = PTR_ERR(data->hwmon_dev);
1217                data->hwmon_dev = NULL;
1218                goto exit_detach;
1219        }
1220
1221        /*
1222         * We take the data_mutex lock early so that watchdog_open() cannot
1223         * run when misc_register() has completed, but we've not yet added
1224         * our data to the watchdog_data_list (and set the default timeout)
1225         */
1226        mutex_lock(&watchdog_data_mutex);
1227        for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) {
1228                /* Register our watchdog part */
1229                snprintf(data->watchdog_name, sizeof(data->watchdog_name),
1230                        "watchdog%c", (i == 0) ? '\0' : ('0' + i));
1231                data->watchdog_miscdev.name = data->watchdog_name;
1232                data->watchdog_miscdev.fops = &watchdog_fops;
1233                data->watchdog_miscdev.minor = watchdog_minors[i];
1234                err = misc_register(&data->watchdog_miscdev);
1235                if (err == -EBUSY)
1236                        continue;
1237                if (err) {
1238                        data->watchdog_miscdev.minor = 0;
1239                        dev_err(&client->dev,
1240                                "Registering watchdog chardev: %d\n", err);
1241                        break;
1242                }
1243
1244                list_add(&data->list, &watchdog_data_list);
1245                watchdog_set_timeout(data, 60);
1246                dev_info(&client->dev,
1247                        "Registered watchdog chardev major 10, minor: %d\n",
1248                        watchdog_minors[i]);
1249                break;
1250        }
1251        if (i == ARRAY_SIZE(watchdog_minors)) {
1252                data->watchdog_miscdev.minor = 0;
1253                dev_warn(&client->dev,
1254                         "Couldn't register watchdog chardev (due to no free minor)\n");
1255        }
1256        mutex_unlock(&watchdog_data_mutex);
1257
1258        dev_info(&client->dev, "Detected FSC %s chip, revision: %d\n",
1259                names[data->kind], (int) data->revision);
1260
1261        return 0;
1262
1263exit_detach:
1264        fschmd_remove(client); /* will also free data for us */
1265        return err;
1266}
1267
1268static int fschmd_remove(struct i2c_client *client)
1269{
1270        struct fschmd_data *data = i2c_get_clientdata(client);
1271        int i;
1272
1273        /* Unregister the watchdog (if registered) */
1274        if (data->watchdog_miscdev.minor) {
1275                misc_deregister(&data->watchdog_miscdev);
1276                if (data->watchdog_is_open) {
1277                        dev_warn(&client->dev,
1278                                "i2c client detached with watchdog open! "
1279                                "Stopping watchdog.\n");
1280                        watchdog_stop(data);
1281                }
1282                mutex_lock(&watchdog_data_mutex);
1283                list_del(&data->list);
1284                mutex_unlock(&watchdog_data_mutex);
1285                /* Tell the watchdog code the client is gone */
1286                mutex_lock(&data->watchdog_lock);
1287                data->client = NULL;
1288                mutex_unlock(&data->watchdog_lock);
1289        }
1290
1291        /*
1292         * Check if registered in case we're called from fschmd_detect
1293         * to cleanup after an error
1294         */
1295        if (data->hwmon_dev)
1296                hwmon_device_unregister(data->hwmon_dev);
1297
1298        device_remove_file(&client->dev, &dev_attr_alert_led);
1299        for (i = 0; i < (FSCHMD_NO_VOLT_SENSORS[data->kind]); i++)
1300                device_remove_file(&client->dev, &fschmd_attr[i].dev_attr);
1301        for (i = 0; i < (FSCHMD_NO_TEMP_SENSORS[data->kind] * 4); i++)
1302                device_remove_file(&client->dev,
1303                                        &fschmd_temp_attr[i].dev_attr);
1304        for (i = 0; i < (FSCHMD_NO_FAN_SENSORS[data->kind] * 5); i++)
1305                device_remove_file(&client->dev,
1306                                        &fschmd_fan_attr[i].dev_attr);
1307
1308        mutex_lock(&watchdog_data_mutex);
1309        kref_put(&data->kref, fschmd_release_resources);
1310        mutex_unlock(&watchdog_data_mutex);
1311
1312        return 0;
1313}
1314
1315static struct fschmd_data *fschmd_update_device(struct device *dev)
1316{
1317        struct i2c_client *client = to_i2c_client(dev);
1318        struct fschmd_data *data = i2c_get_clientdata(client);
1319        int i;
1320
1321        mutex_lock(&data->update_lock);
1322
1323        if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
1324
1325                for (i = 0; i < FSCHMD_NO_TEMP_SENSORS[data->kind]; i++) {
1326                        data->temp_act[i] = i2c_smbus_read_byte_data(client,
1327                                        FSCHMD_REG_TEMP_ACT[data->kind][i]);
1328                        data->temp_status[i] = i2c_smbus_read_byte_data(client,
1329                                        FSCHMD_REG_TEMP_STATE[data->kind][i]);
1330
1331                        /* The fscpos doesn't have TEMP_LIMIT registers */
1332                        if (FSCHMD_REG_TEMP_LIMIT[data->kind][i])
1333                                data->temp_max[i] = i2c_smbus_read_byte_data(
1334                                        client,
1335                                        FSCHMD_REG_TEMP_LIMIT[data->kind][i]);
1336
1337                        /*
1338                         * reset alarm if the alarm condition is gone,
1339                         * the chip doesn't do this itself
1340                         */
1341                        if ((data->temp_status[i] & FSCHMD_TEMP_ALARM_MASK) ==
1342                                        FSCHMD_TEMP_ALARM_MASK &&
1343                                        data->temp_act[i] < data->temp_max[i])
1344                                i2c_smbus_write_byte_data(client,
1345                                        FSCHMD_REG_TEMP_STATE[data->kind][i],
1346                                        data->temp_status[i]);
1347                }
1348
1349                for (i = 0; i < FSCHMD_NO_FAN_SENSORS[data->kind]; i++) {
1350                        data->fan_act[i] = i2c_smbus_read_byte_data(client,
1351                                        FSCHMD_REG_FAN_ACT[data->kind][i]);
1352                        data->fan_status[i] = i2c_smbus_read_byte_data(client,
1353                                        FSCHMD_REG_FAN_STATE[data->kind][i]);
1354                        data->fan_ripple[i] = i2c_smbus_read_byte_data(client,
1355                                        FSCHMD_REG_FAN_RIPPLE[data->kind][i]);
1356
1357                        /* The fscpos third fan doesn't have a fan_min */
1358                        if (FSCHMD_REG_FAN_MIN[data->kind][i])
1359                                data->fan_min[i] = i2c_smbus_read_byte_data(
1360                                        client,
1361                                        FSCHMD_REG_FAN_MIN[data->kind][i]);
1362
1363                        /* reset fan status if speed is back to > 0 */
1364                        if ((data->fan_status[i] & FSCHMD_FAN_ALARM) &&
1365                                        data->fan_act[i])
1366                                i2c_smbus_write_byte_data(client,
1367                                        FSCHMD_REG_FAN_STATE[data->kind][i],
1368                                        data->fan_status[i]);
1369                }
1370
1371                for (i = 0; i < FSCHMD_NO_VOLT_SENSORS[data->kind]; i++)
1372                        data->volt[i] = i2c_smbus_read_byte_data(client,
1373                                               FSCHMD_REG_VOLT[data->kind][i]);
1374
1375                data->last_updated = jiffies;
1376                data->valid = 1;
1377        }
1378
1379        mutex_unlock(&data->update_lock);
1380
1381        return data;
1382}
1383
1384module_i2c_driver(fschmd_driver);
1385
1386MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
1387MODULE_DESCRIPTION("FSC Poseidon, Hermes, Scylla, Heracles, Heimdall, Hades "
1388                        "and Syleus driver");
1389MODULE_LICENSE("GPL");
1390
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.