linux/drivers/hwmon/Kconfig
<<
>>
Prefs
   1#
   2# Hardware monitoring chip drivers configuration
   3#
   4
   5menuconfig HWMON
   6        tristate "Hardware Monitoring support"
   7        depends on HAS_IOMEM
   8        default y
   9        help
  10          Hardware monitoring devices let you monitor the hardware health
  11          of a system. Most modern motherboards include such a device. It
  12          can include temperature sensors, voltage sensors, fan speed
  13          sensors and various additional features such as the ability to
  14          control the speed of the fans.  If you want this support you
  15          should say Y here and also to the specific driver(s) for your
  16          sensors chip(s) below.
  17
  18          To find out which specific driver(s) you need, use the
  19          sensors-detect script from the lm_sensors package.  Read
  20          <file:Documentation/hwmon/userspace-tools> for details.
  21
  22          This support can also be built as a module.  If so, the module
  23          will be called hwmon.
  24
  25if HWMON
  26
  27config HWMON_VID
  28        tristate
  29        default n
  30
  31config HWMON_DEBUG_CHIP
  32        bool "Hardware Monitoring Chip debugging messages"
  33        default n
  34        help
  35          Say Y here if you want the I2C chip drivers to produce a bunch of
  36          debug messages to the system log.  Select this if you are having
  37          a problem with I2C support and want to see more of what is going
  38          on.
  39
  40comment "Native drivers"
  41
  42config SENSORS_AB8500
  43        tristate "AB8500 thermal monitoring"
  44        depends on AB8500_GPADC && AB8500_BM
  45        default n
  46        help
  47          If you say yes here you get support for the thermal sensor part
  48          of the AB8500 chip. The driver includes thermal management for
  49          AB8500 die and two GPADC channels. The GPADC channel are preferably
  50          used to access sensors outside the AB8500 chip.
  51
  52          This driver can also be built as a module.  If so, the module
  53          will be called abx500-temp.
  54
  55config SENSORS_ABITUGURU
  56        tristate "Abit uGuru (rev 1 & 2)"
  57        depends on X86 && DMI
  58        help
  59          If you say yes here you get support for the sensor part of the first
  60          and second revision of the Abit uGuru chip. The voltage and frequency
  61          control parts of the Abit uGuru are not supported. The Abit uGuru
  62          chip can be found on Abit uGuru featuring motherboards (most modern
  63          Abit motherboards from before end 2005). For more info and a list
  64          of which motherboards have which revision see
  65          Documentation/hwmon/abituguru
  66
  67          This driver can also be built as a module.  If so, the module
  68          will be called abituguru.
  69
  70config SENSORS_ABITUGURU3
  71        tristate "Abit uGuru (rev 3)"
  72        depends on X86 && DMI
  73        help
  74          If you say yes here you get support for the sensor part of the
  75          third revision of the Abit uGuru chip. Only reading the sensors
  76          and their settings is supported. The third revision of the Abit
  77          uGuru chip can be found on recent Abit motherboards (since end
  78          2005). For more info and a list of which motherboards have which
  79          revision see Documentation/hwmon/abituguru3
  80
  81          This driver can also be built as a module.  If so, the module
  82          will be called abituguru3.
  83
  84config SENSORS_AD7314
  85        tristate "Analog Devices AD7314 and compatibles"
  86        depends on SPI
  87        help
  88          If you say yes here you get support for the Analog Devices
  89          AD7314, ADT7301 and ADT7302 temperature sensors.
  90
  91          This driver can also be built as a module. If so, the module
  92          will be called ad7314.
  93
  94config SENSORS_AD7414
  95        tristate "Analog Devices AD7414"
  96        depends on I2C
  97        help
  98          If you say yes here you get support for the Analog Devices
  99          AD7414 temperature monitoring chip.
 100
 101          This driver can also be built as a module. If so, the module
 102          will be called ad7414.
 103
 104config SENSORS_AD7418
 105        tristate "Analog Devices AD7416, AD7417 and AD7418"
 106        depends on I2C
 107        help
 108          If you say yes here you get support for the Analog Devices
 109          AD7416, AD7417 and AD7418 temperature monitoring chips.
 110
 111          This driver can also be built as a module. If so, the module
 112          will be called ad7418.
 113
 114config SENSORS_ADCXX
 115        tristate "National Semiconductor ADCxxxSxxx"
 116        depends on SPI_MASTER
 117        help
 118          If you say yes here you get support for the National Semiconductor
 119          ADC<bb><c>S<sss> chip family, where
 120          * bb  is the resolution in number of bits (8, 10, 12)
 121          * c   is the number of channels (1, 2, 4, 8)
 122          * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 123            kSPS and 101 for 1 MSPS)
 124
 125          Examples : ADC081S101, ADC124S501, ...
 126
 127          This driver can also be built as a module.  If so, the module
 128          will be called adcxx.
 129
 130config SENSORS_ADM1021
 131        tristate "Analog Devices ADM1021 and compatibles"
 132        depends on I2C
 133        help
 134          If you say yes here you get support for Analog Devices ADM1021
 135          and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 136          Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 137
 138          This driver can also be built as a module.  If so, the module
 139          will be called adm1021.
 140
 141config SENSORS_ADM1025
 142        tristate "Analog Devices ADM1025 and compatibles"
 143        depends on I2C
 144        select HWMON_VID
 145        help
 146          If you say yes here you get support for Analog Devices ADM1025
 147          and Philips NE1619 sensor chips.
 148
 149          This driver can also be built as a module.  If so, the module
 150          will be called adm1025.
 151
 152config SENSORS_ADM1026
 153        tristate "Analog Devices ADM1026 and compatibles"
 154        depends on I2C
 155        select HWMON_VID
 156        help
 157          If you say yes here you get support for Analog Devices ADM1026
 158          sensor chip.
 159
 160          This driver can also be built as a module.  If so, the module
 161          will be called adm1026.
 162
 163config SENSORS_ADM1029
 164        tristate "Analog Devices ADM1029"
 165        depends on I2C
 166        help
 167          If you say yes here you get support for Analog Devices ADM1029
 168          sensor chip.
 169          Very rare chip, please let us know you use it.
 170
 171          This driver can also be built as a module.  If so, the module
 172          will be called adm1029.
 173
 174config SENSORS_ADM1031
 175        tristate "Analog Devices ADM1031 and compatibles"
 176        depends on I2C
 177        help
 178          If you say yes here you get support for Analog Devices ADM1031
 179          and ADM1030 sensor chips.
 180
 181          This driver can also be built as a module.  If so, the module
 182          will be called adm1031.
 183
 184config SENSORS_ADM9240
 185        tristate "Analog Devices ADM9240 and compatibles"
 186        depends on I2C
 187        select HWMON_VID
 188        help
 189          If you say yes here you get support for Analog Devices ADM9240,
 190          Dallas DS1780, National Semiconductor LM81 sensor chips.
 191
 192          This driver can also be built as a module.  If so, the module
 193          will be called adm9240.
 194
 195config SENSORS_ADT7X10
 196        tristate
 197        help
 198          This module contains common code shared by the ADT7310/ADT7320 and
 199          ADT7410/ADT7420 temperature monitoring chip drivers.
 200
 201          If build as a module, the module will be called adt7x10.
 202
 203config SENSORS_ADT7310
 204        tristate "Analog Devices ADT7310/ADT7320"
 205        depends on SPI_MASTER
 206        select SENSORS_ADT7X10
 207        help
 208          If you say yes here you get support for the Analog Devices
 209          ADT7310 and ADT7320 temperature monitoring chips.
 210
 211          This driver can also be built as a module. If so, the module
 212          will be called adt7310.
 213
 214config SENSORS_ADT7410
 215        tristate "Analog Devices ADT7410/ADT7420"
 216        depends on I2C
 217        select SENSORS_ADT7X10
 218        help
 219          If you say yes here you get support for the Analog Devices
 220          ADT7410 and ADT7420 temperature monitoring chips.
 221
 222          This driver can also be built as a module. If so, the module
 223          will be called adt7410.
 224
 225config SENSORS_ADT7411
 226        tristate "Analog Devices ADT7411"
 227        depends on I2C
 228        help
 229          If you say yes here you get support for the Analog Devices
 230          ADT7411 voltage and temperature monitoring chip.
 231
 232          This driver can also be built as a module. If so, the module
 233          will be called adt7411.
 234
 235config SENSORS_ADT7462
 236        tristate "Analog Devices ADT7462"
 237        depends on I2C
 238        help
 239          If you say yes here you get support for the Analog Devices
 240          ADT7462 temperature monitoring chips.
 241
 242          This driver can also be built as a module. If so, the module
 243          will be called adt7462.
 244
 245config SENSORS_ADT7470
 246        tristate "Analog Devices ADT7470"
 247        depends on I2C
 248        help
 249          If you say yes here you get support for the Analog Devices
 250          ADT7470 temperature monitoring chips.
 251
 252          This driver can also be built as a module. If so, the module
 253          will be called adt7470.
 254
 255config SENSORS_ADT7475
 256        tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 257        depends on I2C
 258        select HWMON_VID
 259        help
 260          If you say yes here you get support for the Analog Devices
 261          ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 262          chips.
 263
 264          This driver can also be build as a module.  If so, the module
 265          will be called adt7475.
 266
 267config SENSORS_ASC7621
 268        tristate "Andigilog aSC7621"
 269        depends on I2C
 270        help
 271          If you say yes here you get support for the aSC7621
 272          family of SMBus sensors chip found on most Intel X38, X48, X58,
 273          945, 965 and 975 desktop boards.  Currently supported chips:
 274          aSC7621
 275          aSC7621a
 276
 277          This driver can also be built as a module.  If so, the module
 278          will be called asc7621.
 279
 280config SENSORS_K8TEMP
 281        tristate "AMD Athlon64/FX or Opteron temperature sensor"
 282        depends on X86 && PCI
 283        help
 284          If you say yes here you get support for the temperature
 285          sensor(s) inside your CPU. Supported is whole AMD K8
 286          microarchitecture. Please note that you will need at least
 287          lm-sensors 2.10.1 for proper userspace support.
 288
 289          This driver can also be built as a module.  If so, the module
 290          will be called k8temp.
 291
 292config SENSORS_K10TEMP
 293        tristate "AMD Family 10h+ temperature sensor"
 294        depends on X86 && PCI
 295        help
 296          If you say yes here you get support for the temperature
 297          sensor(s) inside your CPU. Supported are later revisions of
 298          the AMD Family 10h and all revisions of the AMD Family 11h,
 299          12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
 300          16h (Kabini) microarchitectures.
 301
 302          This driver can also be built as a module.  If so, the module
 303          will be called k10temp.
 304
 305config SENSORS_FAM15H_POWER
 306        tristate "AMD Family 15h processor power"
 307        depends on X86 && PCI
 308        help
 309          If you say yes here you get support for processor power
 310          information of your AMD family 15h CPU.
 311
 312          This driver can also be built as a module.  If so, the module
 313          will be called fam15h_power.
 314
 315config SENSORS_ASB100
 316        tristate "Asus ASB100 Bach"
 317        depends on X86 && I2C
 318        select HWMON_VID
 319        help
 320          If you say yes here you get support for the ASB100 Bach sensor
 321          chip found on some Asus mainboards.
 322
 323          This driver can also be built as a module.  If so, the module
 324          will be called asb100.
 325
 326config SENSORS_ATXP1
 327        tristate "Attansic ATXP1 VID controller"
 328        depends on I2C
 329        select HWMON_VID
 330        help
 331          If you say yes here you get support for the Attansic ATXP1 VID
 332          controller.
 333
 334          If your board have such a chip, you are able to control your CPU
 335          core and other voltages.
 336
 337          This driver can also be built as a module.  If so, the module
 338          will be called atxp1.
 339
 340config SENSORS_DS620
 341        tristate "Dallas Semiconductor DS620"
 342        depends on I2C
 343        help
 344          If you say yes here you get support for Dallas Semiconductor
 345          DS620 sensor chip.
 346
 347          This driver can also be built as a module.  If so, the module
 348          will be called ds620.
 349
 350config SENSORS_DS1621
 351        tristate "Dallas Semiconductor DS1621 and compatibles"
 352        depends on I2C
 353        help
 354          If you say yes here you get support for Dallas Semiconductor/Maxim
 355          Integrated DS1621 sensor chips and compatible models including:
 356
 357          - Dallas Semiconductor DS1625
 358          - Maxim Integrated DS1631
 359          - Maxim Integrated DS1721
 360          - Maxim Integrated DS1731
 361
 362          This driver can also be built as a module.  If so, the module
 363          will be called ds1621.
 364
 365config SENSORS_DA9052_ADC
 366        tristate "Dialog DA9052/DA9053 ADC"
 367        depends on PMIC_DA9052
 368        help
 369          Say y here to support the ADC found on Dialog Semiconductor
 370          DA9052-BC and DA9053-AA/Bx PMICs.
 371
 372          This driver can also be built as module. If so, the module
 373          will be called da9052-hwmon.
 374
 375config SENSORS_DA9055
 376        tristate "Dialog Semiconductor DA9055 ADC"
 377        depends on MFD_DA9055
 378        help
 379          If you say yes here you get support for ADC on the Dialog
 380          Semiconductor DA9055 PMIC.
 381
 382          This driver can also be built as a module.  If so, the module
 383          will be called da9055-hwmon.
 384
 385config SENSORS_I5K_AMB
 386        tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 387        depends on PCI
 388        help
 389          If you say yes here you get support for FB-DIMM AMB temperature
 390          monitoring chips on systems with the Intel 5000 series chipset.
 391
 392          This driver can also be built as a module. If so, the module
 393          will be called i5k_amb.
 394
 395config SENSORS_F71805F
 396        tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 397        depends on !PPC
 398        help
 399          If you say yes here you get support for hardware monitoring
 400          features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 401          Super-I/O chips.
 402
 403          This driver can also be built as a module.  If so, the module
 404          will be called f71805f.
 405
 406config SENSORS_F71882FG
 407        tristate "Fintek F71882FG and compatibles"
 408        depends on !PPC
 409        help
 410          If you say yes here you get support for hardware monitoring
 411          features of many Fintek Super-I/O (LPC) chips. The currently
 412          supported chips are:
 413            F71808E/A
 414            F71858FG
 415            F71862FG
 416            F71863FG
 417            F71869F/E/A
 418            F71882FG
 419            F71883FG
 420            F71889FG/ED/A
 421            F8000
 422            F81801U
 423            F81865F
 424
 425          This driver can also be built as a module.  If so, the module
 426          will be called f71882fg.
 427
 428config SENSORS_F75375S
 429        tristate "Fintek F75375S/SP, F75373 and F75387"
 430        depends on I2C
 431        help
 432          If you say yes here you get support for hardware monitoring
 433          features of the Fintek F75375S/SP, F75373 and F75387
 434
 435          This driver can also be built as a module.  If so, the module
 436          will be called f75375s.
 437
 438config SENSORS_FSCHMD
 439        tristate "Fujitsu Siemens Computers sensor chips"
 440        depends on X86 && I2C
 441        help
 442          If you say yes here you get support for the following Fujitsu
 443          Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 444          Heimdall, Heracles, Hades and Syleus including support for the
 445          integrated watchdog.
 446
 447          This is a merged driver for FSC sensor chips replacing the fscpos,
 448          fscscy and fscher drivers and adding support for several other FSC
 449          sensor chips.
 450
 451          This driver can also be built as a module.  If so, the module
 452          will be called fschmd.
 453
 454config SENSORS_G760A
 455        tristate "GMT G760A"
 456        depends on I2C
 457        help
 458          If you say yes here you get support for Global Mixed-mode
 459          Technology Inc G760A fan speed PWM controller chips.
 460
 461          This driver can also be built as a module.  If so, the module
 462          will be called g760a.
 463
 464config SENSORS_G762
 465        tristate "GMT G762 and G763"
 466        depends on I2C
 467        help
 468          If you say yes here you get support for Global Mixed-mode
 469          Technology Inc G762 and G763 fan speed PWM controller chips.
 470
 471          This driver can also be built as a module.  If so, the module
 472          will be called g762.
 473
 474config SENSORS_GL518SM
 475        tristate "Genesys Logic GL518SM"
 476        depends on I2C
 477        help
 478          If you say yes here you get support for Genesys Logic GL518SM
 479          sensor chips.
 480
 481          This driver can also be built as a module.  If so, the module
 482          will be called gl518sm.
 483
 484config SENSORS_GL520SM
 485        tristate "Genesys Logic GL520SM"
 486        depends on I2C
 487        select HWMON_VID
 488        help
 489          If you say yes here you get support for Genesys Logic GL520SM
 490          sensor chips.
 491
 492          This driver can also be built as a module.  If so, the module
 493          will be called gl520sm.
 494
 495config SENSORS_GPIO_FAN
 496        tristate "GPIO fan"
 497        depends on GPIOLIB
 498        help
 499          If you say yes here you get support for fans connected to GPIO lines.
 500
 501          This driver can also be built as a module.  If so, the module
 502          will be called gpio-fan.
 503
 504config SENSORS_HIH6130
 505        tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 506        depends on I2C
 507        help
 508          If you say yes here you get support for Honeywell Humidicon
 509          HIH-6130 and HIH-6131 Humidicon humidity sensors.
 510
 511          This driver can also be built as a module.  If so, the module
 512          will be called hih6130.
 513
 514config SENSORS_HTU21
 515        tristate "Measurement Specialties HTU21D humidity/temperature sensors"
 516        depends on I2C
 517        help
 518          If you say yes here you get support for the Measurement Specialties
 519          HTU21D humidity and temperature sensors.
 520
 521          This driver can also be built as a module.  If so, the module
 522          will be called htu21.
 523
 524config SENSORS_CORETEMP
 525        tristate "Intel Core/Core2/Atom temperature sensor"
 526        depends on X86
 527        help
 528          If you say yes here you get support for the temperature
 529          sensor inside your CPU. Most of the family 6 CPUs
 530          are supported. Check Documentation/hwmon/coretemp for details.
 531
 532config SENSORS_IBMAEM
 533        tristate "IBM Active Energy Manager temperature/power sensors and control"
 534        select IPMI_SI
 535        depends on IPMI_HANDLER
 536        help
 537          If you say yes here you get support for the temperature and
 538          power sensors and capping hardware in various IBM System X
 539          servers that support Active Energy Manager.  This includes
 540          the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 541          and certain HC10/HS2x/LS2x/QS2x blades.
 542
 543          This driver can also be built as a module.  If so, the module
 544          will be called ibmaem.
 545
 546config SENSORS_IBMPEX
 547        tristate "IBM PowerExecutive temperature/power sensors"
 548        select IPMI_SI
 549        depends on IPMI_HANDLER
 550        help
 551          If you say yes here you get support for the temperature and
 552          power sensors in various IBM System X servers that support
 553          PowerExecutive.  So far this includes the x3350, x3550, x3650,
 554          x3655, and x3755; the x3800, x3850, and x3950 models that have
 555          PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 556
 557          This driver can also be built as a module.  If so, the module
 558          will be called ibmpex.
 559
 560config SENSORS_IIO_HWMON
 561        tristate "Hwmon driver that uses channels specified via iio maps"
 562        depends on IIO
 563        help
 564          This is a platform driver that in combination with a suitable
 565          map allows IIO devices to provide basic hwmon functionality
 566          for those channels specified in the map.  This map can be provided
 567          either via platform data or the device tree bindings.
 568
 569config SENSORS_IT87
 570        tristate "ITE IT87xx and compatibles"
 571        depends on !PPC
 572        select HWMON_VID
 573        help
 574          If you say yes here you get support for ITE IT8705F, IT8712F,
 575          IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 576          IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
 577          SiS950 clone.
 578
 579          This driver can also be built as a module.  If so, the module
 580          will be called it87.
 581
 582config SENSORS_JZ4740
 583        tristate "Ingenic JZ4740 SoC ADC driver"
 584        depends on MACH_JZ4740 && MFD_JZ4740_ADC
 585        help
 586          If you say yes here you get support for reading adc values from the ADCIN
 587          pin on Ingenic JZ4740 SoC based boards.
 588
 589          This driver can also be build as a module. If so, the module will be
 590          called jz4740-hwmon.
 591
 592config SENSORS_JC42
 593        tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 594        depends on I2C
 595        help
 596          If you say yes here, you get support for JEDEC JC42.4 compliant
 597          temperature sensors, which are used on many DDR3 memory modules for
 598          mobile devices and servers.  Support will include, but not be limited
 599          to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 600          MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 601          STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 602
 603          This driver can also be built as a module.  If so, the module
 604          will be called jc42.
 605
 606config SENSORS_LINEAGE
 607        tristate "Lineage Compact Power Line Power Entry Module"
 608        depends on I2C
 609        help
 610          If you say yes here you get support for the Lineage Compact Power Line
 611          series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 612          CP2000DC, CP2725, and others.
 613
 614          This driver can also be built as a module.  If so, the module
 615          will be called lineage-pem.
 616
 617config SENSORS_LM63
 618        tristate "National Semiconductor LM63 and compatibles"
 619        depends on I2C
 620        help
 621          If you say yes here you get support for the National
 622          Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 623          sensors with integrated fan control.  Such chips are found
 624          on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 625          others.
 626
 627          This driver can also be built as a module.  If so, the module
 628          will be called lm63.
 629
 630config SENSORS_LM70
 631        tristate "National Semiconductor LM70 and compatibles"
 632        depends on SPI_MASTER
 633        help
 634          If you say yes here you get support for the National Semiconductor
 635          LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 636          ture sensor chips.
 637
 638          This driver can also be built as a module.  If so, the module
 639          will be called lm70.
 640
 641config SENSORS_LM73
 642        tristate "National Semiconductor LM73"
 643        depends on I2C
 644        help
 645          If you say yes here you get support for National Semiconductor LM73
 646          sensor chips.
 647          This driver can also be built as a module.  If so, the module
 648          will be called lm73.
 649
 650config SENSORS_LM75
 651        tristate "National Semiconductor LM75 and compatibles"
 652        depends on I2C
 653        help
 654          If you say yes here you get support for one common type of
 655          temperature sensor chip, with models including:
 656
 657                - Analog Devices ADT75
 658                - Dallas Semiconductor DS75, DS1775 and DS7505
 659                - Maxim MAX6625 and MAX6626
 660                - Microchip MCP980x
 661                - National Semiconductor LM75, LM75A
 662                - NXP's LM75A
 663                - ST Microelectronics STDS75
 664                - TelCom (now Microchip) TCN75
 665                - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 666                  TMP275
 667
 668          This driver supports driver model based binding through board
 669          specific I2C device tables.
 670
 671          It also supports the "legacy" style of driver binding.  To use
 672          that with some chips which don't replicate LM75 quirks exactly,
 673          you may need the "force" module parameter.
 674
 675          This driver can also be built as a module.  If so, the module
 676          will be called lm75.
 677
 678config SENSORS_LM77
 679        tristate "National Semiconductor LM77"
 680        depends on I2C
 681        help
 682          If you say yes here you get support for National Semiconductor LM77
 683          sensor chips.
 684
 685          This driver can also be built as a module.  If so, the module
 686          will be called lm77.
 687
 688config SENSORS_LM78
 689        tristate "National Semiconductor LM78 and compatibles"
 690        depends on I2C
 691        select HWMON_VID
 692        help
 693          If you say yes here you get support for National Semiconductor LM78,
 694          LM78-J and LM79.
 695
 696          This driver can also be built as a module.  If so, the module
 697          will be called lm78.
 698
 699config SENSORS_LM80
 700        tristate "National Semiconductor LM80 and LM96080"
 701        depends on I2C
 702        help
 703          If you say yes here you get support for National Semiconductor
 704          LM80 and LM96080 sensor chips.
 705
 706          This driver can also be built as a module.  If so, the module
 707          will be called lm80.
 708
 709config SENSORS_LM83
 710        tristate "National Semiconductor LM83 and compatibles"
 711        depends on I2C
 712        help
 713          If you say yes here you get support for National Semiconductor
 714          LM82 and LM83 sensor chips.
 715
 716          This driver can also be built as a module.  If so, the module
 717          will be called lm83.
 718
 719config SENSORS_LM85
 720        tristate "National Semiconductor LM85 and compatibles"
 721        depends on I2C
 722        select HWMON_VID
 723        help
 724          If you say yes here you get support for National Semiconductor LM85
 725          sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 726          EMC6D101, EMC6D102, and EMC6D103.
 727
 728          This driver can also be built as a module.  If so, the module
 729          will be called lm85.
 730
 731config SENSORS_LM87
 732        tristate "National Semiconductor LM87 and compatibles"
 733        depends on I2C
 734        select HWMON_VID
 735        help
 736          If you say yes here you get support for National Semiconductor LM87
 737          and Analog Devices ADM1024 sensor chips.
 738
 739          This driver can also be built as a module.  If so, the module
 740          will be called lm87.
 741
 742config SENSORS_LM90
 743        tristate "National Semiconductor LM90 and compatibles"
 744        depends on I2C
 745        help
 746          If you say yes here you get support for National Semiconductor LM90,
 747          LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 748          Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 749          MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 750          Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 751          sensor chips.
 752
 753          This driver can also be built as a module.  If so, the module
 754          will be called lm90.
 755
 756config SENSORS_LM92
 757        tristate "National Semiconductor LM92 and compatibles"
 758        depends on I2C
 759        help
 760          If you say yes here you get support for National Semiconductor LM92
 761          and Maxim MAX6635 sensor chips.
 762
 763          This driver can also be built as a module.  If so, the module
 764          will be called lm92.
 765
 766config SENSORS_LM93
 767        tristate "National Semiconductor LM93 and compatibles"
 768        depends on I2C
 769        select HWMON_VID
 770        help
 771          If you say yes here you get support for National Semiconductor LM93,
 772          LM94, and compatible sensor chips.
 773
 774          This driver can also be built as a module.  If so, the module
 775          will be called lm93.
 776
 777config SENSORS_LTC4151
 778        tristate "Linear Technology LTC4151"
 779        depends on I2C
 780        default n
 781        help
 782          If you say yes here you get support for Linear Technology LTC4151
 783          High Voltage I2C Current and Voltage Monitor interface.
 784
 785          This driver can also be built as a module. If so, the module will
 786          be called ltc4151.
 787
 788config SENSORS_LTC4215
 789        tristate "Linear Technology LTC4215"
 790        depends on I2C
 791        default n
 792        help
 793          If you say yes here you get support for Linear Technology LTC4215
 794          Hot Swap Controller I2C interface.
 795
 796          This driver can also be built as a module. If so, the module will
 797          be called ltc4215.
 798
 799config SENSORS_LTC4245
 800        tristate "Linear Technology LTC4245"
 801        depends on I2C
 802        default n
 803        help
 804          If you say yes here you get support for Linear Technology LTC4245
 805          Multiple Supply Hot Swap Controller I2C interface.
 806
 807          This driver can also be built as a module. If so, the module will
 808          be called ltc4245.
 809
 810config SENSORS_LTC4261
 811        tristate "Linear Technology LTC4261"
 812        depends on I2C
 813        default n
 814        help
 815          If you say yes here you get support for Linear Technology LTC4261
 816          Negative Voltage Hot Swap Controller I2C interface.
 817
 818          This driver can also be built as a module. If so, the module will
 819          be called ltc4261.
 820
 821config SENSORS_LM95234
 822        tristate "National Semiconductor LM95234"
 823        depends on I2C
 824        help
 825          If you say yes here you get support for the LM95234 temperature
 826          sensor.
 827
 828          This driver can also be built as a module.  If so, the module
 829          will be called lm95234.
 830
 831config SENSORS_LM95241
 832        tristate "National Semiconductor LM95241 and compatibles"
 833        depends on I2C
 834        help
 835          If you say yes here you get support for LM95231 and LM95241 sensor
 836          chips.
 837
 838          This driver can also be built as a module.  If so, the module
 839          will be called lm95241.
 840
 841config SENSORS_LM95245
 842        tristate "National Semiconductor LM95245 sensor chip"
 843        depends on I2C
 844        help
 845          If you say yes here you get support for LM95245 sensor chip.
 846
 847          This driver can also be built as a module.  If so, the module
 848          will be called lm95245.
 849
 850config SENSORS_MAX1111
 851        tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 852        depends on SPI_MASTER
 853        help
 854          Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 855          ADC chips.
 856
 857          This driver can also be built as a module.  If so, the module
 858          will be called max1111.
 859
 860config SENSORS_MAX16065
 861        tristate "Maxim MAX16065 System Manager and compatibles"
 862        depends on I2C
 863        help
 864          If you say yes here you get support for hardware monitoring
 865          capabilities of the following Maxim System Manager chips.
 866            MAX16065
 867            MAX16066
 868            MAX16067
 869            MAX16068
 870            MAX16070
 871            MAX16071
 872
 873          This driver can also be built as a module.  If so, the module
 874          will be called max16065.
 875
 876config SENSORS_MAX1619
 877        tristate "Maxim MAX1619 sensor chip"
 878        depends on I2C
 879        help
 880          If you say yes here you get support for MAX1619 sensor chip.
 881
 882          This driver can also be built as a module.  If so, the module
 883          will be called max1619.
 884
 885config SENSORS_MAX1668
 886        tristate "Maxim MAX1668 and compatibles"
 887        depends on I2C
 888        help
 889          If you say yes here you get support for MAX1668, MAX1989 and
 890          MAX1805 chips.
 891
 892          This driver can also be built as a module.  If so, the module
 893          will be called max1668.
 894
 895config SENSORS_MAX197
 896        tristate "Maxim MAX197 and compatibles"
 897        help
 898          Support for the Maxim MAX197 A/D converter.
 899          Support will include, but not be limited to, MAX197, and MAX199.
 900
 901          This driver can also be built as a module. If so, the module
 902          will be called max197.
 903
 904config SENSORS_MAX6639
 905        tristate "Maxim MAX6639 sensor chip"
 906        depends on I2C
 907        help
 908          If you say yes here you get support for the MAX6639
 909          sensor chips.
 910
 911          This driver can also be built as a module.  If so, the module
 912          will be called max6639.
 913
 914config SENSORS_MAX6642
 915        tristate "Maxim MAX6642 sensor chip"
 916        depends on I2C
 917        help
 918          If you say yes here you get support for MAX6642 sensor chip.
 919          MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 920          with Overtemperature Alarm from Maxim.
 921
 922          This driver can also be built as a module.  If so, the module
 923          will be called max6642.
 924
 925config SENSORS_MAX6650
 926        tristate "Maxim MAX6650 sensor chip"
 927        depends on I2C
 928        help
 929          If you say yes here you get support for the MAX6650 / MAX6651
 930          sensor chips.
 931
 932          This driver can also be built as a module.  If so, the module
 933          will be called max6650.
 934
 935config SENSORS_MAX6697
 936        tristate "Maxim MAX6697 and compatibles"
 937        depends on I2C
 938        help
 939          If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 940          MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 941          temperature sensor chips.
 942
 943          This driver can also be built as a module.  If so, the module
 944          will be called max6697.
 945
 946config SENSORS_MCP3021
 947        tristate "Microchip MCP3021 and compatibles"
 948        depends on I2C
 949        help
 950          If you say yes here you get support for MCP3021 and MCP3221.
 951          The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 952          with 12-bit resolution.
 953
 954          This driver can also be built as a module.  If so, the module
 955          will be called mcp3021.
 956
 957config SENSORS_NCT6775
 958        tristate "Nuvoton NCT6775F and compatibles"
 959        depends on !PPC
 960        select HWMON_VID
 961        help
 962          If you say yes here you get support for the hardware monitoring
 963          functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D
 964          and compatible Super-I/O chips. This driver replaces the
 965          w83627ehf driver for NCT6775F and NCT6776F.
 966
 967          This driver can also be built as a module.  If so, the module
 968          will be called nct6775.
 969
 970config SENSORS_NTC_THERMISTOR
 971        tristate "NTC thermistor support"
 972        depends on (!OF && !IIO) || (OF && IIO)
 973        help
 974          This driver supports NTC thermistors sensor reading and its
 975          interpretation. The driver can also monitor the temperature and
 976          send notifications about the temperature.
 977
 978          Currently, this driver supports
 979          NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 980
 981          This driver can also be built as a module.  If so, the module
 982          will be called ntc-thermistor.
 983
 984config SENSORS_PC87360
 985        tristate "National Semiconductor PC87360 family"
 986        depends on !PPC
 987        select HWMON_VID
 988        help
 989          If you say yes here you get access to the hardware monitoring
 990          functions of the National Semiconductor PC8736x Super-I/O chips.
 991          The PC87360, PC87363 and PC87364 only have fan monitoring and
 992          control.  The PC87365 and PC87366 additionally have voltage and
 993          temperature monitoring.
 994
 995          This driver can also be built as a module.  If so, the module
 996          will be called pc87360.
 997
 998config SENSORS_PC87427
 999        tristate "National Semiconductor PC87427"
1000        depends on !PPC
1001        help
1002          If you say yes here you get access to the hardware monitoring
1003          functions of the National Semiconductor PC87427 Super-I/O chip.
1004          The chip has two distinct logical devices, one for fan speed
1005          monitoring and control, and one for voltage and temperature
1006          monitoring. Fan speed monitoring and control are supported, as
1007          well as temperature monitoring. Voltages aren't supported yet.
1008
1009          This driver can also be built as a module.  If so, the module
1010          will be called pc87427.
1011
1012config SENSORS_PCF8591
1013        tristate "Philips PCF8591 ADC/DAC"
1014        depends on I2C
1015        default n
1016        help
1017          If you say yes here you get support for Philips PCF8591 4-channel
1018          ADC, 1-channel DAC chips.
1019
1020          This driver can also be built as a module.  If so, the module
1021          will be called pcf8591.
1022
1023          These devices are hard to detect and rarely found on mainstream
1024          hardware.  If unsure, say N.
1025
1026source drivers/hwmon/pmbus/Kconfig
1027
1028config SENSORS_SHT15
1029        tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
1030        depends on GPIOLIB
1031        help
1032          If you say yes here you get support for the Sensiron SHT10, SHT11,
1033          SHT15, SHT71, SHT75 humidity and temperature sensors.
1034
1035          This driver can also be built as a module.  If so, the module
1036          will be called sht15.
1037
1038config SENSORS_SHT21
1039        tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
1040        depends on I2C
1041        help
1042          If you say yes here you get support for the Sensiron SHT21, SHT25
1043          humidity and temperature sensors.
1044
1045          This driver can also be built as a module.  If so, the module
1046          will be called sht21.
1047
1048config SENSORS_S3C
1049        tristate "Samsung built-in ADC"
1050        depends on S3C_ADC
1051        help
1052          If you say yes here you get support for the on-board ADCs of
1053          the Samsung S3C24XX, S3C64XX and other series of SoC
1054
1055          This driver can also be built as a module. If so, the module
1056          will be called s3c-hwmon.
1057
1058config SENSORS_S3C_RAW
1059        bool "Include raw channel attributes in sysfs"
1060        depends on SENSORS_S3C
1061        help
1062          Say Y here if you want to include raw copies of all the ADC
1063          channels in sysfs.
1064
1065config SENSORS_SIS5595
1066        tristate "Silicon Integrated Systems Corp. SiS5595"
1067        depends on PCI
1068        help
1069          If you say yes here you get support for the integrated sensors in
1070          SiS5595 South Bridges.
1071
1072          This driver can also be built as a module.  If so, the module
1073          will be called sis5595.
1074
1075config SENSORS_SMM665
1076        tristate "Summit Microelectronics SMM665"
1077        depends on I2C
1078        default n
1079        help
1080          If you say yes here you get support for the hardware monitoring
1081          features of the Summit Microelectronics SMM665/SMM665B Six-Channel
1082          Active DC Output Controller / Monitor.
1083
1084          Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
1085          Support for those chips is untested.
1086
1087          This driver can also be built as a module. If so, the module will
1088          be called smm665.
1089
1090config SENSORS_DME1737
1091        tristate "SMSC DME1737, SCH311x and compatibles"
1092        depends on I2C && !PPC
1093        select HWMON_VID
1094        help
1095          If you say yes here you get support for the hardware monitoring
1096          and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1097          Asus A8000 Super-I/O chips.
1098
1099          This driver can also be built as a module.  If so, the module
1100          will be called dme1737.
1101
1102config SENSORS_EMC1403
1103        tristate "SMSC EMC1403/23 thermal sensor"
1104        depends on I2C
1105        help
1106          If you say yes here you get support for the SMSC EMC1403/23
1107          temperature monitoring chip.
1108
1109          Threshold values can be configured using sysfs.
1110          Data from the different diodes are accessible via sysfs.
1111
1112config SENSORS_EMC2103
1113        tristate "SMSC EMC2103"
1114        depends on I2C
1115        help
1116          If you say yes here you get support for the temperature
1117          and fan sensors of the SMSC EMC2103 chips.
1118
1119          This driver can also be built as a module.  If so, the module
1120          will be called emc2103.
1121
1122config SENSORS_EMC6W201
1123        tristate "SMSC EMC6W201"
1124        depends on I2C
1125        help
1126          If you say yes here you get support for the SMSC EMC6W201
1127          hardware monitoring chip.
1128
1129          This driver can also be built as a module.  If so, the module
1130          will be called emc6w201.
1131
1132config SENSORS_SMSC47M1
1133        tristate "SMSC LPC47M10x and compatibles"
1134        depends on !PPC
1135        help
1136          If you say yes here you get support for the integrated fan
1137          monitoring and control capabilities of the SMSC LPC47B27x,
1138          LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1139          LPC47M192, LPC47M292 and LPC47M997 chips.
1140
1141          The temperature and voltage sensor features of the LPC47M15x,
1142          LPC47M192, LPC47M292 and LPC47M997 are supported by another
1143          driver, select also "SMSC LPC47M192 and compatibles" below for
1144          those.
1145
1146          This driver can also be built as a module.  If so, the module
1147          will be called smsc47m1.
1148
1149config SENSORS_SMSC47M192
1150        tristate "SMSC LPC47M192 and compatibles"
1151        depends on I2C
1152        select HWMON_VID
1153        help
1154          If you say yes here you get support for the temperature and
1155          voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1156          and LPC47M997 chips.
1157
1158          The fan monitoring and control capabilities of these chips
1159          are supported by another driver, select
1160          "SMSC LPC47M10x and compatibles" above. You need both drivers
1161          if you want fan control and voltage/temperature sensor support.
1162
1163          This driver can also be built as a module.  If so, the module
1164          will be called smsc47m192.
1165
1166config SENSORS_SMSC47B397
1167        tristate "SMSC LPC47B397-NC"
1168        depends on !PPC
1169        help
1170          If you say yes here you get support for the SMSC LPC47B397-NC
1171          sensor chip.
1172
1173          This driver can also be built as a module.  If so, the module
1174          will be called smsc47b397.
1175
1176config SENSORS_SCH56XX_COMMON
1177        tristate
1178        default n
1179
1180config SENSORS_SCH5627
1181        tristate "SMSC SCH5627"
1182        depends on !PPC && WATCHDOG
1183        select SENSORS_SCH56XX_COMMON
1184        select WATCHDOG_CORE
1185        help
1186          If you say yes here you get support for the hardware monitoring
1187          features of the SMSC SCH5627 Super-I/O chip including support for
1188          the integrated watchdog.
1189
1190          This driver can also be built as a module.  If so, the module
1191          will be called sch5627.
1192
1193config SENSORS_SCH5636
1194        tristate "SMSC SCH5636"
1195        depends on !PPC && WATCHDOG
1196        select SENSORS_SCH56XX_COMMON
1197        select WATCHDOG_CORE
1198        help
1199          SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1200          hardware monitoring solutions, allowing motherboard manufacturers to
1201          create their own custom hwmon solution based upon the SCH5636.
1202
1203          Currently this driver only supports the Fujitsu Theseus SCH5636 based
1204          hwmon solution. Say yes here if you want support for the Fujitsu
1205          Theseus' hardware monitoring features including support for the
1206          integrated watchdog.
1207
1208          This driver can also be built as a module.  If so, the module
1209          will be called sch5636.
1210
1211config SENSORS_ADS1015
1212        tristate "Texas Instruments ADS1015"
1213        depends on I2C
1214        help
1215          If you say yes here you get support for Texas Instruments
1216          ADS1015/ADS1115 12/16-bit 4-input ADC device.
1217
1218          This driver can also be built as a module.  If so, the module
1219          will be called ads1015.
1220
1221config SENSORS_ADS7828
1222        tristate "Texas Instruments ADS7828 and compatibles"
1223        depends on I2C
1224        help
1225          If you say yes here you get support for Texas Instruments ADS7828 and
1226          ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1227          it is 8-bit on ADS7830.
1228
1229          This driver can also be built as a module.  If so, the module
1230          will be called ads7828.
1231
1232config SENSORS_ADS7871
1233        tristate "Texas Instruments ADS7871 A/D converter"
1234        depends on SPI
1235        help
1236          If you say yes here you get support for TI ADS7871 & ADS7870
1237
1238          This driver can also be built as a module.  If so, the module
1239          will be called ads7871.
1240
1241config SENSORS_AMC6821
1242        tristate "Texas Instruments AMC6821"
1243        depends on I2C 
1244        help
1245          If you say yes here you get support for the Texas Instruments
1246          AMC6821 hardware monitoring chips.
1247
1248          This driver can also be build as a module.  If so, the module
1249          will be called amc6821.
1250
1251config SENSORS_INA209
1252        tristate "TI / Burr Brown INA209"
1253        depends on I2C
1254        help
1255          If you say yes here you get support for the TI / Burr Brown INA209
1256          voltage / current / power monitor I2C interface.
1257
1258          This driver can also be built as a module. If so, the module will
1259          be called ina209.
1260
1261config SENSORS_INA2XX
1262        tristate "Texas Instruments INA219 and compatibles"
1263        depends on I2C
1264        help
1265          If you say yes here you get support for INA219, INA220, INA226, and
1266          INA230 power monitor chips.
1267
1268          The INA2xx driver is configured for the default configuration of
1269          the part as described in the datasheet.
1270          Default value for Rshunt is 10 mOhms.
1271          This driver can also be built as a module.  If so, the module
1272          will be called ina2xx.
1273
1274config SENSORS_THMC50
1275        tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1276        depends on I2C
1277        help
1278          If you say yes here you get support for Texas Instruments THMC50
1279          sensor chips and clones: the Analog Devices ADM1022.
1280
1281          This driver can also be built as a module.  If so, the module
1282          will be called thmc50.
1283
1284config SENSORS_TMP102
1285        tristate "Texas Instruments TMP102"
1286        depends on I2C
1287        help
1288          If you say yes here you get support for Texas Instruments TMP102
1289          sensor chips.
1290
1291          This driver can also be built as a module.  If so, the module
1292          will be called tmp102.
1293
1294config SENSORS_TMP401
1295        tristate "Texas Instruments TMP401 and compatibles"
1296        depends on I2C
1297        help
1298          If you say yes here you get support for Texas Instruments TMP401,
1299          TMP411, TMP431, and TMP432 temperature sensor chips.
1300
1301          This driver can also be built as a module.  If so, the module
1302          will be called tmp401.
1303
1304config SENSORS_TMP421
1305        tristate "Texas Instruments TMP421 and compatible"
1306        depends on I2C
1307        help
1308          If you say yes here you get support for Texas Instruments TMP421,
1309          TMP422 and TMP423 temperature sensor chips.
1310
1311          This driver can also be built as a module.  If so, the module
1312          will be called tmp421.
1313
1314config SENSORS_TWL4030_MADC
1315        tristate "Texas Instruments TWL4030 MADC Hwmon"
1316        depends on TWL4030_MADC
1317        help
1318        If you say yes here you get hwmon support for triton
1319        TWL4030-MADC.
1320
1321        This driver can also be built as a module. If so it will be called
1322        twl4030-madc-hwmon.
1323
1324config SENSORS_VEXPRESS
1325        tristate "Versatile Express"
1326        depends on VEXPRESS_CONFIG
1327        help
1328          This driver provides support for hardware sensors available on
1329          the ARM Ltd's Versatile Express platform. It can provide wide
1330          range of information like temperature, power, energy.
1331
1332config SENSORS_VIA_CPUTEMP
1333        tristate "VIA CPU temperature sensor"
1334        depends on X86
1335        select HWMON_VID
1336        help
1337          If you say yes here you get support for the temperature
1338          sensor inside your CPU. Supported are all known variants of
1339          the VIA C7 and Nano.
1340
1341config SENSORS_VIA686A
1342        tristate "VIA686A"
1343        depends on PCI
1344        help
1345          If you say yes here you get support for the integrated sensors in
1346          Via 686A/B South Bridges.
1347
1348          This driver can also be built as a module.  If so, the module
1349          will be called via686a.
1350
1351config SENSORS_VT1211
1352        tristate "VIA VT1211"
1353        depends on !PPC
1354        select HWMON_VID
1355        help
1356          If you say yes here then you get support for hardware monitoring
1357          features of the VIA VT1211 Super-I/O chip.
1358
1359          This driver can also be built as a module.  If so, the module
1360          will be called vt1211.
1361
1362config SENSORS_VT8231
1363        tristate "VIA VT8231"
1364        depends on PCI
1365        select HWMON_VID
1366        help
1367          If you say yes here then you get support for the integrated sensors
1368          in the VIA VT8231 device.
1369
1370          This driver can also be built as a module.  If so, the module
1371          will be called vt8231.
1372
1373config SENSORS_W83781D
1374        tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1375        depends on I2C
1376        select HWMON_VID
1377        help
1378          If you say yes here you get support for the Winbond W8378x series
1379          of sensor chips: the W83781D, W83782D and W83783S, and the similar
1380          Asus AS99127F.
1381
1382          This driver can also be built as a module.  If so, the module
1383          will be called w83781d.
1384
1385config SENSORS_W83791D
1386        tristate "Winbond W83791D"
1387        depends on I2C
1388        select HWMON_VID
1389        help
1390          If you say yes here you get support for the Winbond W83791D chip.
1391
1392          This driver can also be built as a module.  If so, the module
1393          will be called w83791d.
1394
1395config SENSORS_W83792D
1396        tristate "Winbond W83792D"
1397        depends on I2C
1398        help
1399          If you say yes here you get support for the Winbond W83792D chip.
1400
1401          This driver can also be built as a module.  If so, the module
1402          will be called w83792d.
1403
1404config SENSORS_W83793
1405        tristate "Winbond W83793"
1406        depends on I2C
1407        select HWMON_VID
1408        help
1409          If you say yes here you get support for the Winbond W83793
1410          hardware monitoring chip, including support for the integrated
1411          watchdog.
1412
1413          This driver can also be built as a module.  If so, the module
1414          will be called w83793.
1415
1416config SENSORS_W83795
1417        tristate "Winbond/Nuvoton W83795G/ADG"
1418        depends on I2C
1419        help
1420          If you say yes here you get support for the Winbond W83795G and
1421          W83795ADG hardware monitoring chip, including manual fan speed
1422          control.
1423
1424          This driver can also be built as a module.  If so, the module
1425          will be called w83795.
1426
1427config SENSORS_W83795_FANCTRL
1428        boolean "Include automatic fan control support (DANGEROUS)"
1429        depends on SENSORS_W83795
1430        default n
1431        help
1432          If you say yes here, support for automatic fan speed control
1433          will be included in the driver.
1434
1435          This part of the code wasn't carefully reviewed and tested yet,
1436          so enabling this option is strongly discouraged on production
1437          servers. Only developers and testers should enable it for the
1438          time being.
1439
1440          Please also note that this option will create sysfs attribute
1441          files which may change in the future, so you shouldn't rely
1442          on them being stable.
1443
1444config SENSORS_W83L785TS
1445        tristate "Winbond W83L785TS-S"
1446        depends on I2C
1447        help
1448          If you say yes here you get support for the Winbond W83L785TS-S
1449          sensor chip, which is used on the Asus A7N8X, among other
1450          motherboards.
1451
1452          This driver can also be built as a module.  If so, the module
1453          will be called w83l785ts.
1454
1455config SENSORS_W83L786NG
1456        tristate "Winbond W83L786NG, W83L786NR"
1457        depends on I2C
1458        help
1459          If you say yes here you get support for the Winbond W83L786NG
1460          and W83L786NR sensor chips.
1461
1462          This driver can also be built as a module.  If so, the module
1463          will be called w83l786ng.
1464
1465config SENSORS_W83627HF
1466        tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1467        depends on !PPC
1468        select HWMON_VID
1469        help
1470          If you say yes here you get support for the Winbond W836X7 series
1471          of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1472          W83697HF.
1473
1474          This driver can also be built as a module.  If so, the module
1475          will be called w83627hf.
1476
1477config SENSORS_W83627EHF
1478        tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1479        depends on !PPC
1480        select HWMON_VID
1481        help
1482          If you say yes here you get support for the hardware
1483          monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1484
1485          This driver also supports the W83627EHG, which is the lead-free
1486          version of the W83627EHF, and the W83627DHG, which is a similar
1487          chip suited for specific Intel processors that use PECI such as
1488          the Core 2 Duo. And also the W83627UHG, which is a stripped down
1489          version of the W83627DHG (as far as hardware monitoring goes.)
1490
1491          This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1492          (also known as W83667HG-I), and NCT6776F.
1493
1494          This driver can also be built as a module.  If so, the module
1495          will be called w83627ehf.
1496
1497config SENSORS_WM831X
1498        tristate "WM831x PMICs"
1499        depends on MFD_WM831X
1500        help
1501          If you say yes here you get support for the hardware
1502          monitoring functionality of the Wolfson Microelectronics
1503          WM831x series of PMICs.
1504
1505          This driver can also be built as a module.  If so, the module
1506          will be called wm831x-hwmon.
1507
1508config SENSORS_WM8350
1509        tristate "Wolfson Microelectronics WM835x"
1510        depends on MFD_WM8350
1511        help
1512          If you say yes here you get support for the hardware
1513          monitoring features of the WM835x series of PMICs.
1514
1515          This driver can also be built as a module.  If so, the module
1516          will be called wm8350-hwmon.
1517
1518config SENSORS_ULTRA45
1519        tristate "Sun Ultra45 PIC16F747"
1520        depends on SPARC64
1521        help
1522          This driver provides support for the Ultra45 workstation environmental
1523          sensors.
1524
1525config SENSORS_APPLESMC
1526        tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1527        depends on INPUT && X86
1528        select NEW_LEDS
1529        select LEDS_CLASS
1530        select INPUT_POLLDEV
1531        default n
1532        help
1533          This driver provides support for the Apple System Management
1534          Controller, which provides an accelerometer (Apple Sudden Motion
1535          Sensor), light sensors, temperature sensors, keyboard backlight
1536          control and fan control.
1537
1538          Only Intel-based Apple's computers are supported (MacBook Pro,
1539          MacBook, MacMini).
1540
1541          Data from the different sensors, keyboard backlight control and fan
1542          control are accessible via sysfs.
1543
1544          This driver also provides an absolute input class device, allowing
1545          the laptop to act as a pinball machine-esque joystick.
1546
1547          Say Y here if you have an applicable laptop and want to experience
1548          the awesome power of applesmc.
1549
1550config SENSORS_MC13783_ADC
1551        tristate "Freescale MC13783/MC13892 ADC"
1552        depends on MFD_MC13XXX
1553        help
1554          Support for the A/D converter on MC13783 and MC13892 PMIC.
1555
1556if ACPI
1557
1558comment "ACPI drivers"
1559
1560config SENSORS_ACPI_POWER
1561        tristate "ACPI 4.0 power meter"
1562        help
1563          This driver exposes ACPI 4.0 power meters as hardware monitoring
1564          devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1565          and a power meter.
1566
1567          To compile this driver as a module, choose M here:
1568          the module will be called acpi_power_meter.
1569
1570config SENSORS_ATK0110
1571        tristate "ASUS ATK0110"
1572        depends on X86
1573        help
1574          If you say yes here you get support for the ACPI hardware
1575          monitoring interface found in many ASUS motherboards. This
1576          driver will provide readings of fans, voltages and temperatures
1577          through the system firmware.
1578
1579          This driver can also be built as a module. If so, the module
1580          will be called asus_atk0110.
1581
1582endif # ACPI
1583
1584endif # HWMON
1585
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.