linux/Documentation/devicetree/bindings/sound/cs4271.txt
<<
>>
Prefs
   1Cirrus Logic CS4271 DT bindings
   2
   3This driver supports both the I2C and the SPI bus.
   4
   5Required properties:
   6
   7 - compatible: "cirrus,cs4271"
   8
   9For required properties on SPI, please consult
  10Documentation/devicetree/bindings/spi/spi-bus.txt
  11
  12Required properties on I2C:
  13
  14 - reg: the i2c address
  15
  16
  17Optional properties:
  18
  19 - reset-gpio:  a GPIO spec to define which pin is connected to the chip's
  20                !RESET pin
  21 - cirrus,amuteb-eq-bmutec:     When given, the Codec's AMUTEB=BMUTEC flag
  22                                is enabled.
  23 - cirrus,enable-soft-reset:
  24        The CS4271 requires its LRCLK and MCLK to be stable before its RESET
  25        line is de-asserted. That also means that clocks cannot be changed
  26        without putting the chip back into hardware reset, which also requires
  27        a complete re-initialization of all registers.
  28
  29        One (undocumented) workaround is to assert and de-assert the PDN bit
  30        in the MODE2 register. This workaround can be enabled with this DT
  31        property.
  32
  33        Note that this is not needed in case the clocks are stable
  34        throughout the entire runtime of the codec.
  35
  36Examples:
  37
  38        codec_i2c: cs4271@10 {
  39                compatible = "cirrus,cs4271";
  40                reg = <0x10>;
  41                reset-gpio = <&gpio 23 0>;
  42        };
  43
  44        codec_spi: cs4271@0 {
  45                compatible = "cirrus,cs4271";
  46                reg = <0x0>;
  47                reset-gpio = <&gpio 23 0>;
  48                spi-max-frequency = <6000000>;
  49        };
  50
  51