linux/scripts/Makefile.lib
<<
>>
Prefs
   1# Backward compatibility
   2asflags-y  += $(EXTRA_AFLAGS)
   3ccflags-y  += $(EXTRA_CFLAGS)
   4cppflags-y += $(EXTRA_CPPFLAGS)
   5ldflags-y  += $(EXTRA_LDFLAGS)
   6
   7#
   8# flags that take effect in sub directories
   9export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
  10export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
  11
  12# Figure out what we need to build from the various variables
  13# ===========================================================================
  14
  15# When an object is listed to be built compiled-in and modular,
  16# only build the compiled-in version
  17
  18obj-m := $(filter-out $(obj-y),$(obj-m))
  19
  20# Libraries are always collected in one lib file.
  21# Filter out objects already built-in
  22
  23lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
  24
  25
  26# Handle objects in subdirs
  27# ---------------------------------------------------------------------------
  28# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
  29#   and add the directory to the list of dirs to descend into: $(subdir-y)
  30# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 
  31#   and add the directory to the list of dirs to descend into: $(subdir-m)
  32
  33# Determine modorder.
  34# Unfortunately, we don't have information about ordering between -y
  35# and -m subdirs.  Just put -y's first.
  36modorder        := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
  37
  38__subdir-y      := $(patsubst %/,%,$(filter %/, $(obj-y)))
  39subdir-y        += $(__subdir-y)
  40__subdir-m      := $(patsubst %/,%,$(filter %/, $(obj-m)))
  41subdir-m        += $(__subdir-m)
  42obj-y           := $(patsubst %/, %/built-in.o, $(obj-y))
  43obj-m           := $(filter-out %/, $(obj-m))
  44
  45# Subdirectories we need to descend into
  46
  47subdir-ym       := $(sort $(subdir-y) $(subdir-m))
  48
  49# if $(foo-objs) exists, foo.o is a composite object 
  50multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
  51multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
  52multi-used   := $(multi-used-y) $(multi-used-m)
  53single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
  54
  55# Build list of the parts of our composite objects, our composite
  56# objects depend on those (obviously)
  57multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
  58multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
  59multi-objs   := $(multi-objs-y) $(multi-objs-m)
  60
  61# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
  62# tell kbuild to descend
  63subdir-obj-y := $(filter %/built-in.o, $(obj-y))
  64
  65# $(obj-dirs) is a list of directories that contain object files
  66obj-dirs := $(dir $(multi-objs) $(subdir-obj-y))
  67
  68# Replace multi-part objects by their individual parts, look at local dir only
  69real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
  70real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
  71
  72# Add subdir path
  73
  74extra-y         := $(addprefix $(obj)/,$(extra-y))
  75always          := $(addprefix $(obj)/,$(always))
  76targets         := $(addprefix $(obj)/,$(targets))
  77modorder        := $(addprefix $(obj)/,$(modorder))
  78obj-y           := $(addprefix $(obj)/,$(obj-y))
  79obj-m           := $(addprefix $(obj)/,$(obj-m))
  80lib-y           := $(addprefix $(obj)/,$(lib-y))
  81subdir-obj-y    := $(addprefix $(obj)/,$(subdir-obj-y))
  82real-objs-y     := $(addprefix $(obj)/,$(real-objs-y))
  83real-objs-m     := $(addprefix $(obj)/,$(real-objs-m))
  84single-used-m   := $(addprefix $(obj)/,$(single-used-m))
  85multi-used-y    := $(addprefix $(obj)/,$(multi-used-y))
  86multi-used-m    := $(addprefix $(obj)/,$(multi-used-m))
  87multi-objs-y    := $(addprefix $(obj)/,$(multi-objs-y))
  88multi-objs-m    := $(addprefix $(obj)/,$(multi-objs-m))
  89subdir-ym       := $(addprefix $(obj)/,$(subdir-ym))
  90obj-dirs        := $(addprefix $(obj)/,$(obj-dirs))
  91
  92# These flags are needed for modversions and compiling, so we define them here
  93# already
  94# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 
  95# end up in (or would, if it gets compiled in)
  96# Note: Files that end up in two or more modules are compiled without the
  97#       KBUILD_MODNAME definition. The reason is that any made-up name would
  98#       differ in different configs.
  99name-fix = $(subst $(comma),_,$(subst -,_,$1))
 100basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
 101modname_flags  = $(if $(filter 1,$(words $(modname))),\
 102                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
 103
 104orig_c_flags   = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
 105                 $(ccflags-y) $(CFLAGS_$(basetarget).o)
 106_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
 107_a_flags       = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
 108                 $(asflags-y) $(AFLAGS_$(basetarget).o)
 109_cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
 110
 111#
 112# Enable gcov profiling flags for a file, directory or for all files depending
 113# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
 114# (in this order)
 115#
 116ifeq ($(CONFIG_GCOV_KERNEL),y)
 117_c_flags += $(if $(patsubst n%,, \
 118                $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
 119                $(CFLAGS_GCOV))
 120endif
 121
 122# If building the kernel in a separate objtree expand all occurrences
 123# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
 124
 125ifeq ($(KBUILD_SRC),)
 126__c_flags       = $(_c_flags)
 127__a_flags       = $(_a_flags)
 128__cpp_flags     = $(_cpp_flags)
 129else
 130
 131# -I$(obj) locates generated .h files
 132# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
 133#   and locates generated .h files
 134# FIXME: Replace both with specific CFLAGS* statements in the makefiles
 135__c_flags       = $(call addtree,-I$(obj)) $(call flags,_c_flags)
 136__a_flags       =                          $(call flags,_a_flags)
 137__cpp_flags     =                          $(call flags,_cpp_flags)
 138endif
 139
 140c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 141                 $(__c_flags) $(modkern_cflags)                           \
 142                 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
 143
 144a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 145                 $(__a_flags) $(modkern_aflags)
 146
 147cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
 148                 $(__cpp_flags)
 149
 150ld_flags       = $(LDFLAGS) $(ldflags-y)
 151
 152dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
 153                 -I$(srctree)/arch/$(SRCARCH)/boot/dts                   \
 154                 -I$(srctree)/arch/$(SRCARCH)/boot/dts/include           \
 155                 -undef -D__DTS__
 156
 157# Finds the multi-part object the current object will be linked into
 158modname-multi = $(sort $(foreach m,$(multi-used),\
 159                $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
 160
 161ifdef REGENERATE_PARSERS
 162
 163# GPERF
 164# ---------------------------------------------------------------------------
 165quiet_cmd_gperf = GPERF $@
 166      cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
 167
 168.PRECIOUS: $(src)/%.hash.c_shipped
 169$(src)/%.hash.c_shipped: $(src)/%.gperf
 170        $(call cmd,gperf)
 171
 172# LEX
 173# ---------------------------------------------------------------------------
 174LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
 175
 176quiet_cmd_flex = LEX     $@
 177      cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
 178
 179.PRECIOUS: $(src)/%.lex.c_shipped
 180$(src)/%.lex.c_shipped: $(src)/%.l
 181        $(call cmd,flex)
 182
 183# YACC
 184# ---------------------------------------------------------------------------
 185YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
 186
 187quiet_cmd_bison = YACC    $@
 188      cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
 189
 190.PRECIOUS: $(src)/%.tab.c_shipped
 191$(src)/%.tab.c_shipped: $(src)/%.y
 192        $(call cmd,bison)
 193
 194quiet_cmd_bison_h = YACC    $@
 195      cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
 196
 197.PRECIOUS: $(src)/%.tab.h_shipped
 198$(src)/%.tab.h_shipped: $(src)/%.y
 199        $(call cmd,bison_h)
 200
 201endif
 202
 203# Shipped files
 204# ===========================================================================
 205
 206quiet_cmd_shipped = SHIPPED $@
 207cmd_shipped = cat $< > $@
 208
 209$(obj)/%: $(src)/%_shipped
 210        $(call cmd,shipped)
 211
 212# Commands useful for building a boot image
 213# ===========================================================================
 214# 
 215#       Use as following:
 216#
 217#       target: source(s) FORCE
 218#               $(if_changed,ld/objcopy/gzip)
 219#
 220#       and add target to extra-y so that we know we have to
 221#       read in the saved command line
 222
 223# Linking
 224# ---------------------------------------------------------------------------
 225
 226quiet_cmd_ld = LD      $@
 227cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
 228               $(filter-out FORCE,$^) -o $@ 
 229
 230# Objcopy
 231# ---------------------------------------------------------------------------
 232
 233quiet_cmd_objcopy = OBJCOPY $@
 234cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 235
 236# Gzip
 237# ---------------------------------------------------------------------------
 238
 239quiet_cmd_gzip = GZIP    $@
 240cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
 241        (rm -f $@ ; false)
 242
 243# DTC
 244# ---------------------------------------------------------------------------
 245
 246# Generate an assembly file to wrap the output of the device tree compiler
 247quiet_cmd_dt_S_dtb= DTB    $@
 248cmd_dt_S_dtb=                                           \
 249(                                                       \
 250        echo '\#include <asm-generic/vmlinux.lds.h>';   \
 251        echo '.section .dtb.init.rodata,"a"';           \
 252        echo '.balign STRUCT_ALIGNMENT';                \
 253        echo '.global __dtb_$(*F)_begin';               \
 254        echo '__dtb_$(*F)_begin:';                      \
 255        echo '.incbin "$<" ';                           \
 256        echo '__dtb_$(*F)_end:';                        \
 257        echo '.global __dtb_$(*F)_end';                 \
 258        echo '.balign STRUCT_ALIGNMENT';                \
 259) > $@
 260
 261$(obj)/%.dtb.S: $(obj)/%.dtb
 262        $(call cmd,dt_S_dtb)
 263
 264quiet_cmd_dtc = DTC     $@
 265cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
 266        $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
 267                -i $(dir $<) $(DTC_FLAGS) \
 268                -d $(depfile).dtc.tmp $(dtc-tmp) ; \
 269        cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
 270
 271$(obj)/%.dtb: $(src)/%.dts FORCE
 272        $(call if_changed_dep,dtc)
 273
 274dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
 275
 276# Bzip2
 277# ---------------------------------------------------------------------------
 278
 279# Bzip2 and LZMA do not include size in file... so we have to fake that;
 280# append the size as a 32-bit littleendian number as gzip does.
 281size_append = printf $(shell                                            \
 282dec_size=0;                                                             \
 283for F in $1; do                                                         \
 284        fsize=$$(stat -c "%s" $$F);                                     \
 285        dec_size=$$(expr $$dec_size + $$fsize);                         \
 286done;                                                                   \
 287printf "%08x\n" $$dec_size |                                            \
 288        sed 's/\(..\)/\1 /g' | {                                        \
 289                read ch0 ch1 ch2 ch3;                                   \
 290                for ch in $$ch3 $$ch2 $$ch1 $$ch0; do                   \
 291                        printf '%s%03o' '\\' $$((0x$$ch));              \
 292                done;                                                   \
 293        }                                                               \
 294)
 295
 296quiet_cmd_bzip2 = BZIP2   $@
 297cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
 298        bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 299        (rm -f $@ ; false)
 300
 301# Lzma
 302# ---------------------------------------------------------------------------
 303
 304quiet_cmd_lzma = LZMA    $@
 305cmd_lzma = (cat $(filter-out FORCE,$^) | \
 306        lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 307        (rm -f $@ ; false)
 308
 309quiet_cmd_lzo = LZO     $@
 310cmd_lzo = (cat $(filter-out FORCE,$^) | \
 311        lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 312        (rm -f $@ ; false)
 313
 314# U-Boot mkimage
 315# ---------------------------------------------------------------------------
 316
 317MKIMAGE := $(srctree)/scripts/mkuboot.sh
 318
 319# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
 320# the number of overrides in arch makefiles
 321UIMAGE_ARCH ?= $(SRCARCH)
 322UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
 323UIMAGE_OPTS-y ?=
 324UIMAGE_TYPE ?= kernel
 325UIMAGE_LOADADDR ?= arch_must_set_this
 326UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
 327UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
 328UIMAGE_IN ?= $<
 329UIMAGE_OUT ?= $@
 330
 331quiet_cmd_uimage = UIMAGE  $(UIMAGE_OUT)
 332      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
 333                        -C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
 334                        -T $(UIMAGE_TYPE) \
 335                        -a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
 336                        -n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
 337
 338# XZ
 339# ---------------------------------------------------------------------------
 340# Use xzkern to compress the kernel image and xzmisc to compress other things.
 341#
 342# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
 343# of the kernel decompressor. A BCJ filter is used if it is available for
 344# the target architecture. xzkern also appends uncompressed size of the data
 345# using size_append. The .xz format has the size information available at
 346# the end of the file too, but it's in more complex format and it's good to
 347# avoid changing the part of the boot code that reads the uncompressed size.
 348# Note that the bytes added by size_append will make the xz tool think that
 349# the file is corrupt. This is expected.
 350#
 351# xzmisc doesn't use size_append, so it can be used to create normal .xz
 352# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
 353# big dictionary would increase the memory usage too much in the multi-call
 354# decompression mode. A BCJ filter isn't used either.
 355quiet_cmd_xzkern = XZKERN  $@
 356cmd_xzkern = (cat $(filter-out FORCE,$^) | \
 357        sh $(srctree)/scripts/xz_wrap.sh && \
 358        $(call size_append, $(filter-out FORCE,$^))) > $@ || \
 359        (rm -f $@ ; false)
 360
 361quiet_cmd_xzmisc = XZMISC  $@
 362cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
 363        xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
 364        (rm -f $@ ; false)
 365
 366# misc stuff
 367# ---------------------------------------------------------------------------
 368quote:="
 369
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.