linux/Documentation/dma-buf-sharing.txt
<<
>>
Prefs
   1                    DMA Buffer Sharing API Guide
   2                    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   3
   4                            Sumit Semwal
   5                <sumit dot semwal at linaro dot org>
   6                 <sumit dot semwal at ti dot com>
   7
   8This document serves as a guide to device-driver writers on what is the dma-buf
   9buffer sharing API, how to use it for exporting and using shared buffers.
  10
  11Any device driver which wishes to be a part of DMA buffer sharing, can do so as
  12either the 'exporter' of buffers, or the 'user' of buffers.
  13
  14Say a driver A wants to use buffers created by driver B, then we call B as the
  15exporter, and A as buffer-user.
  16
  17The exporter
  18- implements and manages operations[1] for the buffer
  19- allows other users to share the buffer by using dma_buf sharing APIs,
  20- manages the details of buffer allocation,
  21- decides about the actual backing storage where this allocation happens,
  22- takes care of any migration of scatterlist - for all (shared) users of this
  23   buffer,
  24
  25The buffer-user
  26- is one of (many) sharing users of the buffer.
  27- doesn't need to worry about how the buffer is allocated, or where.
  28- needs a mechanism to get access to the scatterlist that makes up this buffer
  29   in memory, mapped into its own address space, so it can access the same area
  30   of memory.
  31
  32dma-buf operations for device dma only
  33--------------------------------------
  34
  35The dma_buf buffer sharing API usage contains the following steps:
  36
  371. Exporter announces that it wishes to export a buffer
  382. Userspace gets the file descriptor associated with the exported buffer, and
  39   passes it around to potential buffer-users based on use case
  403. Each buffer-user 'connects' itself to the buffer
  414. When needed, buffer-user requests access to the buffer from exporter
  425. When finished with its use, the buffer-user notifies end-of-DMA to exporter
  436. when buffer-user is done using this buffer completely, it 'disconnects'
  44   itself from the buffer.
  45
  46
  471. Exporter's announcement of buffer export
  48
  49   The buffer exporter announces its wish to export a buffer. In this, it
  50   connects its own private buffer data, provides implementation for operations
  51   that can be performed on the exported dma_buf, and flags for the file
  52   associated with this buffer.
  53
  54   Interface:
  55      struct dma_buf *dma_buf_export_named(void *priv, struct dma_buf_ops *ops,
  56                                     size_t size, int flags,
  57                                     const char *exp_name)
  58
  59   If this succeeds, dma_buf_export allocates a dma_buf structure, and returns a
  60   pointer to the same. It also associates an anonymous file with this buffer,
  61   so it can be exported. On failure to allocate the dma_buf object, it returns
  62   NULL.
  63
  64   'exp_name' is the name of exporter - to facilitate information while
  65   debugging.
  66
  67   Exporting modules which do not wish to provide any specific name may use the
  68   helper define 'dma_buf_export()', with the same arguments as above, but
  69   without the last argument; a __FILE__ pre-processor directive will be
  70   inserted in place of 'exp_name' instead.
  71
  722. Userspace gets a handle to pass around to potential buffer-users
  73
  74   Userspace entity requests for a file-descriptor (fd) which is a handle to the
  75   anonymous file associated with the buffer. It can then share the fd with other
  76   drivers and/or processes.
  77
  78   Interface:
  79      int dma_buf_fd(struct dma_buf *dmabuf)
  80
  81   This API installs an fd for the anonymous file associated with this buffer;
  82   returns either 'fd', or error.
  83
  843. Each buffer-user 'connects' itself to the buffer
  85
  86   Each buffer-user now gets a reference to the buffer, using the fd passed to
  87   it.
  88
  89   Interface:
  90      struct dma_buf *dma_buf_get(int fd)
  91
  92   This API will return a reference to the dma_buf, and increment refcount for
  93   it.
  94
  95   After this, the buffer-user needs to attach its device with the buffer, which
  96   helps the exporter to know of device buffer constraints.
  97
  98   Interface:
  99      struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf,
 100                                                struct device *dev)
 101
 102   This API returns reference to an attachment structure, which is then used
 103   for scatterlist operations. It will optionally call the 'attach' dma_buf
 104   operation, if provided by the exporter.
 105
 106   The dma-buf sharing framework does the bookkeeping bits related to managing
 107   the list of all attachments to a buffer.
 108
 109Until this stage, the buffer-exporter has the option to choose not to actually
 110allocate the backing storage for this buffer, but wait for the first buffer-user
 111to request use of buffer for allocation.
 112
 113
 1144. When needed, buffer-user requests access to the buffer
 115
 116   Whenever a buffer-user wants to use the buffer for any DMA, it asks for
 117   access to the buffer using dma_buf_map_attachment API. At least one attach to
 118   the buffer must have happened before map_dma_buf can be called.
 119
 120   Interface:
 121      struct sg_table * dma_buf_map_attachment(struct dma_buf_attachment *,
 122                                         enum dma_data_direction);
 123
 124   This is a wrapper to dma_buf->ops->map_dma_buf operation, which hides the
 125   "dma_buf->ops->" indirection from the users of this interface.
 126
 127   In struct dma_buf_ops, map_dma_buf is defined as
 128      struct sg_table * (*map_dma_buf)(struct dma_buf_attachment *,
 129                                                enum dma_data_direction);
 130
 131   It is one of the buffer operations that must be implemented by the exporter.
 132   It should return the sg_table containing scatterlist for this buffer, mapped
 133   into caller's address space.
 134
 135   If this is being called for the first time, the exporter can now choose to
 136   scan through the list of attachments for this buffer, collate the requirements
 137   of the attached devices, and choose an appropriate backing storage for the
 138   buffer.
 139
 140   Based on enum dma_data_direction, it might be possible to have multiple users
 141   accessing at the same time (for reading, maybe), or any other kind of sharing
 142   that the exporter might wish to make available to buffer-users.
 143
 144   map_dma_buf() operation can return -EINTR if it is interrupted by a signal.
 145
 146
 1475. When finished, the buffer-user notifies end-of-DMA to exporter
 148
 149   Once the DMA for the current buffer-user is over, it signals 'end-of-DMA' to
 150   the exporter using the dma_buf_unmap_attachment API.
 151
 152   Interface:
 153      void dma_buf_unmap_attachment(struct dma_buf_attachment *,
 154                                    struct sg_table *);
 155
 156   This is a wrapper to dma_buf->ops->unmap_dma_buf() operation, which hides the
 157   "dma_buf->ops->" indirection from the users of this interface.
 158
 159   In struct dma_buf_ops, unmap_dma_buf is defined as
 160      void (*unmap_dma_buf)(struct dma_buf_attachment *, struct sg_table *);
 161
 162   unmap_dma_buf signifies the end-of-DMA for the attachment provided. Like
 163   map_dma_buf, this API also must be implemented by the exporter.
 164
 165
 1666. when buffer-user is done using this buffer, it 'disconnects' itself from the
 167   buffer.
 168
 169   After the buffer-user has no more interest in using this buffer, it should
 170   disconnect itself from the buffer:
 171
 172   - it first detaches itself from the buffer.
 173
 174   Interface:
 175      void dma_buf_detach(struct dma_buf *dmabuf,
 176                          struct dma_buf_attachment *dmabuf_attach);
 177
 178   This API removes the attachment from the list in dmabuf, and optionally calls
 179   dma_buf->ops->detach(), if provided by exporter, for any housekeeping bits.
 180
 181   - Then, the buffer-user returns the buffer reference to exporter.
 182
 183   Interface:
 184     void dma_buf_put(struct dma_buf *dmabuf);
 185
 186   This API then reduces the refcount for this buffer.
 187
 188   If, as a result of this call, the refcount becomes 0, the 'release' file
 189   operation related to this fd is called. It calls the dmabuf->ops->release()
 190   operation in turn, and frees the memory allocated for dmabuf when exported.
 191
 192NOTES:
 193- Importance of attach-detach and {map,unmap}_dma_buf operation pairs
 194   The attach-detach calls allow the exporter to figure out backing-storage
 195   constraints for the currently-interested devices. This allows preferential
 196   allocation, and/or migration of pages across different types of storage
 197   available, if possible.
 198
 199   Bracketing of DMA access with {map,unmap}_dma_buf operations is essential
 200   to allow just-in-time backing of storage, and migration mid-way through a
 201   use-case.
 202
 203- Migration of backing storage if needed
 204   If after
 205   - at least one map_dma_buf has happened,
 206   - and the backing storage has been allocated for this buffer,
 207   another new buffer-user intends to attach itself to this buffer, it might
 208   be allowed, if possible for the exporter.
 209
 210   In case it is allowed by the exporter:
 211    if the new buffer-user has stricter 'backing-storage constraints', and the
 212    exporter can handle these constraints, the exporter can just stall on the
 213    map_dma_buf until all outstanding access is completed (as signalled by
 214    unmap_dma_buf).
 215    Once all users have finished accessing and have unmapped this buffer, the
 216    exporter could potentially move the buffer to the stricter backing-storage,
 217    and then allow further {map,unmap}_dma_buf operations from any buffer-user
 218    from the migrated backing-storage.
 219
 220   If the exporter cannot fulfil the backing-storage constraints of the new
 221   buffer-user device as requested, dma_buf_attach() would return an error to
 222   denote non-compatibility of the new buffer-sharing request with the current
 223   buffer.
 224
 225   If the exporter chooses not to allow an attach() operation once a
 226   map_dma_buf() API has been called, it simply returns an error.
 227
 228Kernel cpu access to a dma-buf buffer object
 229--------------------------------------------
 230
 231The motivation to allow cpu access from the kernel to a dma-buf object from the
 232importers side are:
 233- fallback operations, e.g. if the devices is connected to a usb bus and the
 234  kernel needs to shuffle the data around first before sending it away.
 235- full transparency for existing users on the importer side, i.e. userspace
 236  should not notice the difference between a normal object from that subsystem
 237  and an imported one backed by a dma-buf. This is really important for drm
 238  opengl drivers that expect to still use all the existing upload/download
 239  paths.
 240
 241Access to a dma_buf from the kernel context involves three steps:
 242
 2431. Prepare access, which invalidate any necessary caches and make the object
 244   available for cpu access.
 2452. Access the object page-by-page with the dma_buf map apis
 2463. Finish access, which will flush any necessary cpu caches and free reserved
 247   resources.
 248
 2491. Prepare access
 250
 251   Before an importer can access a dma_buf object with the cpu from the kernel
 252   context, it needs to notify the exporter of the access that is about to
 253   happen.
 254
 255   Interface:
 256      int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
 257                                   size_t start, size_t len,
 258                                   enum dma_data_direction direction)
 259
 260   This allows the exporter to ensure that the memory is actually available for
 261   cpu access - the exporter might need to allocate or swap-in and pin the
 262   backing storage. The exporter also needs to ensure that cpu access is
 263   coherent for the given range and access direction. The range and access
 264   direction can be used by the exporter to optimize the cache flushing, i.e.
 265   access outside of the range or with a different direction (read instead of
 266   write) might return stale or even bogus data (e.g. when the exporter needs to
 267   copy the data to temporary storage).
 268
 269   This step might fail, e.g. in oom conditions.
 270
 2712. Accessing the buffer
 272
 273   To support dma_buf objects residing in highmem cpu access is page-based using
 274   an api similar to kmap. Accessing a dma_buf is done in aligned chunks of
 275   PAGE_SIZE size. Before accessing a chunk it needs to be mapped, which returns
 276   a pointer in kernel virtual address space. Afterwards the chunk needs to be
 277   unmapped again. There is no limit on how often a given chunk can be mapped
 278   and unmapped, i.e. the importer does not need to call begin_cpu_access again
 279   before mapping the same chunk again.
 280
 281   Interfaces:
 282      void *dma_buf_kmap(struct dma_buf *, unsigned long);
 283      void dma_buf_kunmap(struct dma_buf *, unsigned long, void *);
 284
 285   There are also atomic variants of these interfaces. Like for kmap they
 286   facilitate non-blocking fast-paths. Neither the importer nor the exporter (in
 287   the callback) is allowed to block when using these.
 288
 289   Interfaces:
 290      void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long);
 291      void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *);
 292
 293   For importers all the restrictions of using kmap apply, like the limited
 294   supply of kmap_atomic slots. Hence an importer shall only hold onto at most 2
 295   atomic dma_buf kmaps at the same time (in any given process context).
 296
 297   dma_buf kmap calls outside of the range specified in begin_cpu_access are
 298   undefined. If the range is not PAGE_SIZE aligned, kmap needs to succeed on
 299   the partial chunks at the beginning and end but may return stale or bogus
 300   data outside of the range (in these partial chunks).
 301
 302   Note that these calls need to always succeed. The exporter needs to complete
 303   any preparations that might fail in begin_cpu_access.
 304
 305   For some cases the overhead of kmap can be too high, a vmap interface
 306   is introduced. This interface should be used very carefully, as vmalloc
 307   space is a limited resources on many architectures.
 308
 309   Interfaces:
 310      void *dma_buf_vmap(struct dma_buf *dmabuf)
 311      void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
 312
 313   The vmap call can fail if there is no vmap support in the exporter, or if it
 314   runs out of vmalloc space. Fallback to kmap should be implemented. Note that
 315   the dma-buf layer keeps a reference count for all vmap access and calls down
 316   into the exporter's vmap function only when no vmapping exists, and only
 317   unmaps it once. Protection against concurrent vmap/vunmap calls is provided
 318   by taking the dma_buf->lock mutex.
 319
 3203. Finish access
 321
 322   When the importer is done accessing the range specified in begin_cpu_access,
 323   it needs to announce this to the exporter (to facilitate cache flushing and
 324   unpinning of any pinned resources). The result of of any dma_buf kmap calls
 325   after end_cpu_access is undefined.
 326
 327   Interface:
 328      void dma_buf_end_cpu_access(struct dma_buf *dma_buf,
 329                                  size_t start, size_t len,
 330                                  enum dma_data_direction dir);
 331
 332
 333Direct Userspace Access/mmap Support
 334------------------------------------
 335
 336Being able to mmap an export dma-buf buffer object has 2 main use-cases:
 337- CPU fallback processing in a pipeline and
 338- supporting existing mmap interfaces in importers.
 339
 3401. CPU fallback processing in a pipeline
 341
 342   In many processing pipelines it is sometimes required that the cpu can access
 343   the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid
 344   the need to handle this specially in userspace frameworks for buffer sharing
 345   it's ideal if the dma_buf fd itself can be used to access the backing storage
 346   from userspace using mmap.
 347
 348   Furthermore Android's ION framework already supports this (and is otherwise
 349   rather similar to dma-buf from a userspace consumer side with using fds as
 350   handles, too). So it's beneficial to support this in a similar fashion on
 351   dma-buf to have a good transition path for existing Android userspace.
 352
 353   No special interfaces, userspace simply calls mmap on the dma-buf fd.
 354
 3552. Supporting existing mmap interfaces in exporters
 356
 357   Similar to the motivation for kernel cpu access it is again important that
 358   the userspace code of a given importing subsystem can use the same interfaces
 359   with a imported dma-buf buffer object as with a native buffer object. This is
 360   especially important for drm where the userspace part of contemporary OpenGL,
 361   X, and other drivers is huge, and reworking them to use a different way to
 362   mmap a buffer rather invasive.
 363
 364   The assumption in the current dma-buf interfaces is that redirecting the
 365   initial mmap is all that's needed. A survey of some of the existing
 366   subsystems shows that no driver seems to do any nefarious thing like syncing
 367   up with outstanding asynchronous processing on the device or allocating
 368   special resources at fault time. So hopefully this is good enough, since
 369   adding interfaces to intercept pagefaults and allow pte shootdowns would
 370   increase the complexity quite a bit.
 371
 372   Interface:
 373      int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
 374                       unsigned long);
 375
 376   If the importing subsystem simply provides a special-purpose mmap call to set
 377   up a mapping in userspace, calling do_mmap with dma_buf->file will equally
 378   achieve that for a dma-buf object.
 379
 3803. Implementation notes for exporters
 381
 382   Because dma-buf buffers have invariant size over their lifetime, the dma-buf
 383   core checks whether a vma is too large and rejects such mappings. The
 384   exporter hence does not need to duplicate this check.
 385
 386   Because existing importing subsystems might presume coherent mappings for
 387   userspace, the exporter needs to set up a coherent mapping. If that's not
 388   possible, it needs to fake coherency by manually shooting down ptes when
 389   leaving the cpu domain and flushing caches at fault time. Note that all the
 390   dma_buf files share the same anon inode, hence the exporter needs to replace
 391   the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
 392   required. This is because the kernel uses the underlying inode's address_space
 393   for vma tracking (and hence pte tracking at shootdown time with
 394   unmap_mapping_range).
 395
 396   If the above shootdown dance turns out to be too expensive in certain
 397   scenarios, we can extend dma-buf with a more explicit cache tracking scheme
 398   for userspace mappings. But the current assumption is that using mmap is
 399   always a slower path, so some inefficiencies should be acceptable.
 400
 401   Exporters that shoot down mappings (for any reasons) shall not do any
 402   synchronization at fault time with outstanding device operations.
 403   Synchronization is an orthogonal issue to sharing the backing storage of a
 404   buffer and hence should not be handled by dma-buf itself. This is explicitly
 405   mentioned here because many people seem to want something like this, but if
 406   different exporters handle this differently, buffer sharing can fail in
 407   interesting ways depending upong the exporter (if userspace starts depending
 408   upon this implicit synchronization).
 409
 410Miscellaneous notes
 411-------------------
 412
 413- Any exporters or users of the dma-buf buffer sharing framework must have
 414  a 'select DMA_SHARED_BUFFER' in their respective Kconfigs.
 415
 416- In order to avoid fd leaks on exec, the FD_CLOEXEC flag must be set
 417  on the file descriptor.  This is not just a resource leak, but a
 418  potential security hole.  It could give the newly exec'd application
 419  access to buffers, via the leaked fd, to which it should otherwise
 420  not be permitted access.
 421
 422  The problem with doing this via a separate fcntl() call, versus doing it
 423  atomically when the fd is created, is that this is inherently racy in a
 424  multi-threaded app[3].  The issue is made worse when it is library code
 425  opening/creating the file descriptor, as the application may not even be
 426  aware of the fd's.
 427
 428  To avoid this problem, userspace must have a way to request O_CLOEXEC
 429  flag be set when the dma-buf fd is created.  So any API provided by
 430  the exporting driver to create a dmabuf fd must provide a way to let
 431  userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd().
 432
 433- If an exporter needs to manually flush caches and hence needs to fake
 434  coherency for mmap support, it needs to be able to zap all the ptes pointing
 435  at the backing storage. Now linux mm needs a struct address_space associated
 436  with the struct file stored in vma->vm_file to do that with the function
 437  unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd
 438  with the anon_file struct file, i.e. all dma_bufs share the same file.
 439
 440  Hence exporters need to setup their own file (and address_space) association
 441  by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap
 442  callback. In the specific case of a gem driver the exporter could use the
 443  shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then
 444  zap ptes by unmapping the corresponding range of the struct address_space
 445  associated with their own file.
 446
 447References:
 448[1] struct dma_buf_ops in include/linux/dma-buf.h
 449[2] All interfaces mentioned above defined in include/linux/dma-buf.h
 450[3] https://lwn.net/Articles/236486/
 451
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.