linux/drivers/ata/pata_pcmcia.c
<<
>>
Prefs
   1/*
   2 *   pata_pcmcia.c - PCMCIA PATA controller driver.
   3 *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
   4 *   PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
   5 *                                              <openembedded@hrw.one.pl>
   6 *
   7 *  This program is free software; you can redistribute it and/or modify
   8 *  it under the terms of the GNU General Public License as published by
   9 *  the Free Software Foundation; either version 2, or (at your option)
  10 *  any later version.
  11 *
  12 *  This program is distributed in the hope that it will be useful,
  13 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 *  GNU General Public License for more details.
  16 *
  17 *  You should have received a copy of the GNU General Public License
  18 *  along with this program; see the file COPYING.  If not, write to
  19 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  20 *
  21 *   Heavily based upon ide-cs.c
  22 *   The initial developer of the original code is David A. Hinds
  23 *   <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  24 *   are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  25 */
  26
  27#include <linux/kernel.h>
  28#include <linux/module.h>
  29#include <linux/init.h>
  30#include <linux/blkdev.h>
  31#include <linux/delay.h>
  32#include <linux/slab.h>
  33#include <scsi/scsi_host.h>
  34#include <linux/ata.h>
  35#include <linux/libata.h>
  36
  37#include <pcmcia/cistpl.h>
  38#include <pcmcia/ds.h>
  39#include <pcmcia/cisreg.h>
  40#include <pcmcia/ciscode.h>
  41
  42
  43#define DRV_NAME "pata_pcmcia"
  44#define DRV_VERSION "0.3.5"
  45
  46/**
  47 *      pcmcia_set_mode -       PCMCIA specific mode setup
  48 *      @link: link
  49 *      @r_failed_dev: Return pointer for failed device
  50 *
  51 *      Perform the tuning and setup of the devices and timings, which
  52 *      for PCMCIA is the same as any other controller. We wrap it however
  53 *      as we need to spot hardware with incorrect or missing master/slave
  54 *      decode, which alas is embarrassingly common in the PC world
  55 */
  56
  57static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
  58{
  59        struct ata_device *master = &link->device[0];
  60        struct ata_device *slave = &link->device[1];
  61
  62        if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
  63                return ata_do_set_mode(link, r_failed_dev);
  64
  65        if (memcmp(master->id + ATA_ID_FW_REV,  slave->id + ATA_ID_FW_REV,
  66                           ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) {
  67                /* Suspicious match, but could be two cards from
  68                   the same vendor - check serial */
  69                if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
  70                           ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
  71                        ata_dev_warn(slave, "is a ghost device, ignoring\n");
  72                        ata_dev_disable(slave);
  73                }
  74        }
  75        return ata_do_set_mode(link, r_failed_dev);
  76}
  77
  78/**
  79 *      pcmcia_set_mode_8bit    -       PCMCIA specific mode setup
  80 *      @link: link
  81 *      @r_failed_dev: Return pointer for failed device
  82 *
  83 *      For the simple emulated 8bit stuff the less we do the better.
  84 */
  85
  86static int pcmcia_set_mode_8bit(struct ata_link *link,
  87                                struct ata_device **r_failed_dev)
  88{
  89        return 0;
  90}
  91
  92/**
  93 *      ata_data_xfer_8bit       -      Transfer data by 8bit PIO
  94 *      @dev: device to target
  95 *      @buf: data buffer
  96 *      @buflen: buffer length
  97 *      @rw: read/write
  98 *
  99 *      Transfer data from/to the device data register by 8 bit PIO.
 100 *
 101 *      LOCKING:
 102 *      Inherited from caller.
 103 */
 104
 105static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
 106                                unsigned char *buf, unsigned int buflen, int rw)
 107{
 108        struct ata_port *ap = dev->link->ap;
 109
 110        if (rw == READ)
 111                ioread8_rep(ap->ioaddr.data_addr, buf, buflen);
 112        else
 113                iowrite8_rep(ap->ioaddr.data_addr, buf, buflen);
 114
 115        return buflen;
 116}
 117
 118/**
 119 *      pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers
 120 *      @qc: command
 121 *
 122 *      Drain the FIFO and device of any stuck data following a command
 123 *      failing to complete. In some cases this is necessary before a
 124 *      reset will recover the device.
 125 *
 126 */
 127
 128static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
 129{
 130        int count;
 131        struct ata_port *ap;
 132
 133        /* We only need to flush incoming data when a command was running */
 134        if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
 135                return;
 136
 137        ap = qc->ap;
 138
 139        /* Drain up to 64K of data before we give up this recovery method */
 140        for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
 141                                                        && count++ < 65536;)
 142                ioread8(ap->ioaddr.data_addr);
 143
 144        if (count)
 145                ata_port_warn(ap, "drained %d bytes to clear DRQ\n", count);
 146
 147}
 148
 149static struct scsi_host_template pcmcia_sht = {
 150        ATA_PIO_SHT(DRV_NAME),
 151};
 152
 153static struct ata_port_operations pcmcia_port_ops = {
 154        .inherits       = &ata_sff_port_ops,
 155        .sff_data_xfer  = ata_sff_data_xfer_noirq,
 156        .cable_detect   = ata_cable_40wire,
 157        .set_mode       = pcmcia_set_mode,
 158};
 159
 160static struct ata_port_operations pcmcia_8bit_port_ops = {
 161        .inherits       = &ata_sff_port_ops,
 162        .sff_data_xfer  = ata_data_xfer_8bit,
 163        .cable_detect   = ata_cable_40wire,
 164        .set_mode       = pcmcia_set_mode_8bit,
 165        .sff_drain_fifo = pcmcia_8bit_drain_fifo,
 166};
 167
 168
 169static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
 170{
 171        int *is_kme = priv_data;
 172
 173        if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
 174            != IO_DATA_PATH_WIDTH_8) {
 175                pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 176                pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 177        }
 178        pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
 179        pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
 180
 181        if (pdev->resource[1]->end) {
 182                pdev->resource[0]->end = 8;
 183                pdev->resource[1]->end = (*is_kme) ? 2 : 1;
 184        } else {
 185                if (pdev->resource[0]->end < 16)
 186                        return -ENODEV;
 187        }
 188
 189        return pcmcia_request_io(pdev);
 190}
 191
 192/**
 193 *      pcmcia_init_one         -       attach a PCMCIA interface
 194 *      @pdev: pcmcia device
 195 *
 196 *      Register a PCMCIA IDE interface. Such interfaces are PIO 0 and
 197 *      shared IRQ.
 198 */
 199
 200static int pcmcia_init_one(struct pcmcia_device *pdev)
 201{
 202        struct ata_host *host;
 203        struct ata_port *ap;
 204        int is_kme = 0, ret = -ENOMEM, p;
 205        unsigned long io_base, ctl_base;
 206        void __iomem *io_addr, *ctl_addr;
 207        int n_ports = 1;
 208        struct ata_port_operations *ops = &pcmcia_port_ops;
 209
 210        /* Set up attributes in order to probe card and get resources */
 211        pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
 212                CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
 213
 214        /* See if we have a manufacturer identifier. Use it to set is_kme for
 215           vendor quirks */
 216        is_kme = ((pdev->manf_id == MANFID_KME) &&
 217                  ((pdev->card_id == PRODID_KME_KXLC005_A) ||
 218                   (pdev->card_id == PRODID_KME_KXLC005_B)));
 219
 220        if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) {
 221                pdev->config_flags &= ~CONF_AUTO_CHECK_VCC;
 222                if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme))
 223                        goto failed; /* No suitable config found */
 224        }
 225        io_base = pdev->resource[0]->start;
 226        if (pdev->resource[1]->end)
 227                ctl_base = pdev->resource[1]->start;
 228        else
 229                ctl_base = pdev->resource[0]->start + 0x0e;
 230
 231        if (!pdev->irq)
 232                goto failed;
 233
 234        ret = pcmcia_enable_device(pdev);
 235        if (ret)
 236                goto failed;
 237
 238        /* iomap */
 239        ret = -ENOMEM;
 240        io_addr = devm_ioport_map(&pdev->dev, io_base, 8);
 241        ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1);
 242        if (!io_addr || !ctl_addr)
 243                goto failed;
 244
 245        /* Success. Disable the IRQ nIEN line, do quirks */
 246        iowrite8(0x02, ctl_addr);
 247        if (is_kme)
 248                iowrite8(0x81, ctl_addr + 0x01);
 249
 250        /* FIXME: Could be more ports at base + 0x10 but we only deal with
 251           one right now */
 252        if (resource_size(pdev->resource[0]) >= 0x20)
 253                n_ports = 2;
 254
 255        if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
 256                ops = &pcmcia_8bit_port_ops;
 257        /*
 258         *      Having done the PCMCIA plumbing the ATA side is relatively
 259         *      sane.
 260         */
 261        ret = -ENOMEM;
 262        host = ata_host_alloc(&pdev->dev, n_ports);
 263        if (!host)
 264                goto failed;
 265
 266        for (p = 0; p < n_ports; p++) {
 267                ap = host->ports[p];
 268
 269                ap->ops = ops;
 270                ap->pio_mask = ATA_PIO0;        /* ISA so PIO 0 cycles */
 271                ap->flags |= ATA_FLAG_SLAVE_POSS;
 272                ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
 273                ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
 274                ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
 275                ata_sff_std_ports(&ap->ioaddr);
 276
 277                ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
 278        }
 279
 280        /* activate */
 281        ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
 282                                IRQF_SHARED, &pcmcia_sht);
 283        if (ret)
 284                goto failed;
 285
 286        pdev->priv = host;
 287        return 0;
 288
 289failed:
 290        pcmcia_disable_device(pdev);
 291        return ret;
 292}
 293
 294/**
 295 *      pcmcia_remove_one       -       unplug an pcmcia interface
 296 *      @pdev: pcmcia device
 297 *
 298 *      A PCMCIA ATA device has been unplugged. Perform the needed
 299 *      cleanup. Also called on module unload for any active devices.
 300 */
 301
 302static void pcmcia_remove_one(struct pcmcia_device *pdev)
 303{
 304        struct ata_host *host = pdev->priv;
 305
 306        if (host)
 307                ata_host_detach(host);
 308
 309        pcmcia_disable_device(pdev);
 310}
 311
 312static const struct pcmcia_device_id pcmcia_devices[] = {
 313        PCMCIA_DEVICE_FUNC_ID(4),
 314        PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),        /* Corsair */
 315        PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),        /* Hitachi */
 316        PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000),        /* I-O Data CFA */
 317        PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),        /* Mitsubishi CFA */
 318        PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
 319        PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
 320        PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),        /* SanDisk CFA */
 321        PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000),        /* Kingston */
 322        PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620),        /* TI emulated */
 323        PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),        /* Toshiba */
 324        PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 325        PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),        /* Samsung */
 326        PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000),        /* Hitachi */
 327        PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
 328        PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100),        /* Viking CFA */
 329        PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200),        /* Lexar, Viking CFA */
 330        PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
 331        PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
 332        PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 333        PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 334        PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
 335        PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
 336        PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 337        PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 338        PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
 339        PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
 340        PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
 341        PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
 342        PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 343        PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 344        PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
 345        PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 346        PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 347        PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 348        PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
 349        PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
 350        PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 351        PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 352        PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 353        PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 354        PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
 355        PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
 356        PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
 357        PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 358        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
 359        PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
 360        PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
 361        PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
 362        PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
 363        PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
 364        PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 365        PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
 366        PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
 367        PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 368        PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 369        PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
 370        PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
 371        PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
 372        PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 373        PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
 374        PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
 375        PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
 376        PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
 377        PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
 378        PCMCIA_DEVICE_NULL,
 379};
 380
 381MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices);
 382
 383static struct pcmcia_driver pcmcia_driver = {
 384        .owner          = THIS_MODULE,
 385        .name           = DRV_NAME,
 386        .id_table       = pcmcia_devices,
 387        .probe          = pcmcia_init_one,
 388        .remove         = pcmcia_remove_one,
 389};
 390module_pcmcia_driver(pcmcia_driver);
 391
 392MODULE_AUTHOR("Alan Cox");
 393MODULE_DESCRIPTION("low-level driver for PCMCIA ATA");
 394MODULE_LICENSE("GPL");
 395MODULE_VERSION(DRV_VERSION);
 396
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.