linux/drivers/vlynq/vlynq.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 2006, 2007 Eugene Konev <ejka@openwrt.org>
   3 *
   4 * This program is free software; you can redistribute it and/or modify
   5 * it under the terms of the GNU General Public License as published by
   6 * the Free Software Foundation; either version 2 of the License, or
   7 * (at your option) any later version.
   8 *
   9 * This program is distributed in the hope that it will be useful,
  10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 * GNU General Public License for more details.
  13 *
  14 * You should have received a copy of the GNU General Public License
  15 * along with this program; if not, write to the Free Software
  16 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  17 *
  18 * Parts of the VLYNQ specification can be found here:
  19 * http://www.ti.com/litv/pdf/sprue36a
  20 */
  21
  22#include <linux/init.h>
  23#include <linux/types.h>
  24#include <linux/kernel.h>
  25#include <linux/string.h>
  26#include <linux/device.h>
  27#include <linux/module.h>
  28#include <linux/errno.h>
  29#include <linux/platform_device.h>
  30#include <linux/interrupt.h>
  31#include <linux/delay.h>
  32#include <linux/io.h>
  33#include <linux/slab.h>
  34#include <linux/irq.h>
  35
  36#include <linux/vlynq.h>
  37
  38#define VLYNQ_CTRL_PM_ENABLE            0x80000000
  39#define VLYNQ_CTRL_CLOCK_INT            0x00008000
  40#define VLYNQ_CTRL_CLOCK_DIV(x)         (((x) & 7) << 16)
  41#define VLYNQ_CTRL_INT_LOCAL            0x00004000
  42#define VLYNQ_CTRL_INT_ENABLE           0x00002000
  43#define VLYNQ_CTRL_INT_VECTOR(x)        (((x) & 0x1f) << 8)
  44#define VLYNQ_CTRL_INT2CFG              0x00000080
  45#define VLYNQ_CTRL_RESET                0x00000001
  46
  47#define VLYNQ_CTRL_CLOCK_MASK          (0x7 << 16)
  48
  49#define VLYNQ_INT_OFFSET                0x00000014
  50#define VLYNQ_REMOTE_OFFSET             0x00000080
  51
  52#define VLYNQ_STATUS_LINK               0x00000001
  53#define VLYNQ_STATUS_LERROR             0x00000080
  54#define VLYNQ_STATUS_RERROR             0x00000100
  55
  56#define VINT_ENABLE                     0x00000100
  57#define VINT_TYPE_EDGE                  0x00000080
  58#define VINT_LEVEL_LOW                  0x00000040
  59#define VINT_VECTOR(x)                  ((x) & 0x1f)
  60#define VINT_OFFSET(irq)                (8 * ((irq) % 4))
  61
  62#define VLYNQ_AUTONEGO_V2               0x00010000
  63
  64struct vlynq_regs {
  65        u32 revision;
  66        u32 control;
  67        u32 status;
  68        u32 int_prio;
  69        u32 int_status;
  70        u32 int_pending;
  71        u32 int_ptr;
  72        u32 tx_offset;
  73        struct vlynq_mapping rx_mapping[4];
  74        u32 chip;
  75        u32 autonego;
  76        u32 unused[6];
  77        u32 int_device[8];
  78};
  79
  80#ifdef CONFIG_VLYNQ_DEBUG
  81static void vlynq_dump_regs(struct vlynq_device *dev)
  82{
  83        int i;
  84
  85        printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
  86                        dev->local, dev->remote);
  87        for (i = 0; i < 32; i++) {
  88                printk(KERN_DEBUG "VLYNQ: local %d: %08x\n",
  89                        i + 1, ((u32 *)dev->local)[i]);
  90                printk(KERN_DEBUG "VLYNQ: remote %d: %08x\n",
  91                        i + 1, ((u32 *)dev->remote)[i]);
  92        }
  93}
  94
  95static void vlynq_dump_mem(u32 *base, int count)
  96{
  97        int i;
  98
  99        for (i = 0; i < (count + 3) / 4; i++) {
 100                if (i % 4 == 0)
 101                        printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
 102                printk(KERN_DEBUG " 0x%08x", *(base + i));
 103        }
 104        printk(KERN_DEBUG "\n");
 105}
 106#endif
 107
 108/* Check the VLYNQ link status with a given device */
 109static int vlynq_linked(struct vlynq_device *dev)
 110{
 111        int i;
 112
 113        for (i = 0; i < 100; i++)
 114                if (readl(&dev->local->status) & VLYNQ_STATUS_LINK)
 115                        return 1;
 116                else
 117                        cpu_relax();
 118
 119        return 0;
 120}
 121
 122static void vlynq_reset(struct vlynq_device *dev)
 123{
 124        writel(readl(&dev->local->control) | VLYNQ_CTRL_RESET,
 125                        &dev->local->control);
 126
 127        /* Wait for the devices to finish resetting */
 128        msleep(5);
 129
 130        /* Remove reset bit */
 131        writel(readl(&dev->local->control) & ~VLYNQ_CTRL_RESET,
 132                        &dev->local->control);
 133
 134        /* Give some time for the devices to settle */
 135        msleep(5);
 136}
 137
 138static void vlynq_irq_unmask(unsigned int irq)
 139{
 140        u32 val;
 141        struct vlynq_device *dev = get_irq_chip_data(irq);
 142        int virq;
 143
 144        BUG_ON(!dev);
 145        virq = irq - dev->irq_start;
 146        val = readl(&dev->remote->int_device[virq >> 2]);
 147        val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq);
 148        writel(val, &dev->remote->int_device[virq >> 2]);
 149}
 150
 151static void vlynq_irq_mask(unsigned int irq)
 152{
 153        u32 val;
 154        struct vlynq_device *dev = get_irq_chip_data(irq);
 155        int virq;
 156
 157        BUG_ON(!dev);
 158        virq = irq - dev->irq_start;
 159        val = readl(&dev->remote->int_device[virq >> 2]);
 160        val &= ~(VINT_ENABLE << VINT_OFFSET(virq));
 161        writel(val, &dev->remote->int_device[virq >> 2]);
 162}
 163
 164static int vlynq_irq_type(unsigned int irq, unsigned int flow_type)
 165{
 166        u32 val;
 167        struct vlynq_device *dev = get_irq_chip_data(irq);
 168        int virq;
 169
 170        BUG_ON(!dev);
 171        virq = irq - dev->irq_start;
 172        val = readl(&dev->remote->int_device[virq >> 2]);
 173        switch (flow_type & IRQ_TYPE_SENSE_MASK) {
 174        case IRQ_TYPE_EDGE_RISING:
 175        case IRQ_TYPE_EDGE_FALLING:
 176        case IRQ_TYPE_EDGE_BOTH:
 177                val |= VINT_TYPE_EDGE << VINT_OFFSET(virq);
 178                val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
 179                break;
 180        case IRQ_TYPE_LEVEL_HIGH:
 181                val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
 182                val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq));
 183                break;
 184        case IRQ_TYPE_LEVEL_LOW:
 185                val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq));
 186                val |= VINT_LEVEL_LOW << VINT_OFFSET(virq);
 187                break;
 188        default:
 189                return -EINVAL;
 190        }
 191        writel(val, &dev->remote->int_device[virq >> 2]);
 192        return 0;
 193}
 194
 195static void vlynq_local_ack(unsigned int irq)
 196{
 197        struct vlynq_device *dev = get_irq_chip_data(irq);
 198
 199        u32 status = readl(&dev->local->status);
 200
 201        pr_debug("%s: local status: 0x%08x\n",
 202                       dev_name(&dev->dev), status);
 203        writel(status, &dev->local->status);
 204}
 205
 206static void vlynq_remote_ack(unsigned int irq)
 207{
 208        struct vlynq_device *dev = get_irq_chip_data(irq);
 209
 210        u32 status = readl(&dev->remote->status);
 211
 212        pr_debug("%s: remote status: 0x%08x\n",
 213                       dev_name(&dev->dev), status);
 214        writel(status, &dev->remote->status);
 215}
 216
 217static irqreturn_t vlynq_irq(int irq, void *dev_id)
 218{
 219        struct vlynq_device *dev = dev_id;
 220        u32 status;
 221        int virq = 0;
 222
 223        status = readl(&dev->local->int_status);
 224        writel(status, &dev->local->int_status);
 225
 226        if (unlikely(!status))
 227                spurious_interrupt();
 228
 229        while (status) {
 230                if (status & 1)
 231                        do_IRQ(dev->irq_start + virq);
 232                status >>= 1;
 233                virq++;
 234        }
 235
 236        return IRQ_HANDLED;
 237}
 238
 239static struct irq_chip vlynq_irq_chip = {
 240        .name = "vlynq",
 241        .unmask = vlynq_irq_unmask,
 242        .mask = vlynq_irq_mask,
 243        .set_type = vlynq_irq_type,
 244};
 245
 246static struct irq_chip vlynq_local_chip = {
 247        .name = "vlynq local error",
 248        .unmask = vlynq_irq_unmask,
 249        .mask = vlynq_irq_mask,
 250        .ack = vlynq_local_ack,
 251};
 252
 253static struct irq_chip vlynq_remote_chip = {
 254        .name = "vlynq local error",
 255        .unmask = vlynq_irq_unmask,
 256        .mask = vlynq_irq_mask,
 257        .ack = vlynq_remote_ack,
 258};
 259
 260static int vlynq_setup_irq(struct vlynq_device *dev)
 261{
 262        u32 val;
 263        int i, virq;
 264
 265        if (dev->local_irq == dev->remote_irq) {
 266                printk(KERN_ERR
 267                       "%s: local vlynq irq should be different from remote\n",
 268                       dev_name(&dev->dev));
 269                return -EINVAL;
 270        }
 271
 272        /* Clear local and remote error bits */
 273        writel(readl(&dev->local->status), &dev->local->status);
 274        writel(readl(&dev->remote->status), &dev->remote->status);
 275
 276        /* Now setup interrupts */
 277        val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq);
 278        val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL |
 279                VLYNQ_CTRL_INT2CFG;
 280        val |= readl(&dev->local->control);
 281        writel(VLYNQ_INT_OFFSET, &dev->local->int_ptr);
 282        writel(val, &dev->local->control);
 283
 284        val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq);
 285        val |= VLYNQ_CTRL_INT_ENABLE;
 286        val |= readl(&dev->remote->control);
 287        writel(VLYNQ_INT_OFFSET, &dev->remote->int_ptr);
 288        writel(val, &dev->remote->int_ptr);
 289        writel(val, &dev->remote->control);
 290
 291        for (i = dev->irq_start; i <= dev->irq_end; i++) {
 292                virq = i - dev->irq_start;
 293                if (virq == dev->local_irq) {
 294                        set_irq_chip_and_handler(i, &vlynq_local_chip,
 295                                                 handle_level_irq);
 296                        set_irq_chip_data(i, dev);
 297                } else if (virq == dev->remote_irq) {
 298                        set_irq_chip_and_handler(i, &vlynq_remote_chip,
 299                                                 handle_level_irq);
 300                        set_irq_chip_data(i, dev);
 301                } else {
 302                        set_irq_chip_and_handler(i, &vlynq_irq_chip,
 303                                                 handle_simple_irq);
 304                        set_irq_chip_data(i, dev);
 305                        writel(0, &dev->remote->int_device[virq >> 2]);
 306                }
 307        }
 308
 309        if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
 310                printk(KERN_ERR "%s: request_irq failed\n",
 311                                        dev_name(&dev->dev));
 312                return -EAGAIN;
 313        }
 314
 315        return 0;
 316}
 317
 318static void vlynq_device_release(struct device *dev)
 319{
 320        struct vlynq_device *vdev = to_vlynq_device(dev);
 321        kfree(vdev);
 322}
 323
 324static int vlynq_device_match(struct device *dev,
 325                              struct device_driver *drv)
 326{
 327        struct vlynq_device *vdev = to_vlynq_device(dev);
 328        struct vlynq_driver *vdrv = to_vlynq_driver(drv);
 329        struct vlynq_device_id *ids = vdrv->id_table;
 330
 331        while (ids->id) {
 332                if (ids->id == vdev->dev_id) {
 333                        vdev->divisor = ids->divisor;
 334                        vlynq_set_drvdata(vdev, ids);
 335                        printk(KERN_INFO "Driver found for VLYNQ "
 336                                "device: %08x\n", vdev->dev_id);
 337                        return 1;
 338                }
 339                printk(KERN_DEBUG "Not using the %08x VLYNQ device's driver"
 340                        " for VLYNQ device: %08x\n", ids->id, vdev->dev_id);
 341                ids++;
 342        }
 343        return 0;
 344}
 345
 346static int vlynq_device_probe(struct device *dev)
 347{
 348        struct vlynq_device *vdev = to_vlynq_device(dev);
 349        struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
 350        struct vlynq_device_id *id = vlynq_get_drvdata(vdev);
 351        int result = -ENODEV;
 352
 353        if (drv->probe)
 354                result = drv->probe(vdev, id);
 355        if (result)
 356                put_device(dev);
 357        return result;
 358}
 359
 360static int vlynq_device_remove(struct device *dev)
 361{
 362        struct vlynq_driver *drv = to_vlynq_driver(dev->driver);
 363
 364        if (drv->remove)
 365                drv->remove(to_vlynq_device(dev));
 366
 367        return 0;
 368}
 369
 370int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner)
 371{
 372        driver->driver.name = driver->name;
 373        driver->driver.bus = &vlynq_bus_type;
 374        return driver_register(&driver->driver);
 375}
 376EXPORT_SYMBOL(__vlynq_register_driver);
 377
 378void vlynq_unregister_driver(struct vlynq_driver *driver)
 379{
 380        driver_unregister(&driver->driver);
 381}
 382EXPORT_SYMBOL(vlynq_unregister_driver);
 383
 384/*
 385 * A VLYNQ remote device can clock the VLYNQ bus master
 386 * using a dedicated clock line. In that case, both the
 387 * remove device and the bus master should have the same
 388 * serial clock dividers configured. Iterate through the
 389 * 8 possible dividers until we actually link with the
 390 * device.
 391 */
 392static int __vlynq_try_remote(struct vlynq_device *dev)
 393{
 394        int i;
 395
 396        vlynq_reset(dev);
 397        for (i = dev->dev_id ? vlynq_rdiv2 : vlynq_rdiv8; dev->dev_id ?
 398                        i <= vlynq_rdiv8 : i >= vlynq_rdiv2;
 399                dev->dev_id ? i++ : i--) {
 400
 401                if (!vlynq_linked(dev))
 402                        break;
 403
 404                writel((readl(&dev->remote->control) &
 405                                ~VLYNQ_CTRL_CLOCK_MASK) |
 406                                VLYNQ_CTRL_CLOCK_INT |
 407                                VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
 408                                &dev->remote->control);
 409                writel((readl(&dev->local->control)
 410                                & ~(VLYNQ_CTRL_CLOCK_INT |
 411                                VLYNQ_CTRL_CLOCK_MASK)) |
 412                                VLYNQ_CTRL_CLOCK_DIV(i - vlynq_rdiv1),
 413                                &dev->local->control);
 414
 415                if (vlynq_linked(dev)) {
 416                        printk(KERN_DEBUG
 417                                "%s: using remote clock divisor %d\n",
 418                                dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
 419                        dev->divisor = i;
 420                        return 0;
 421                } else {
 422                        vlynq_reset(dev);
 423                }
 424        }
 425
 426        return -ENODEV;
 427}
 428
 429/*
 430 * A VLYNQ remote device can be clocked by the VLYNQ bus
 431 * master using a dedicated clock line. In that case, only
 432 * the bus master configures the serial clock divider.
 433 * Iterate through the 8 possible dividers until we
 434 * actually get a link with the device.
 435 */
 436static int __vlynq_try_local(struct vlynq_device *dev)
 437{
 438        int i;
 439
 440        vlynq_reset(dev);
 441
 442        for (i = dev->dev_id ? vlynq_ldiv2 : vlynq_ldiv8; dev->dev_id ?
 443                        i <= vlynq_ldiv8 : i >= vlynq_ldiv2;
 444                dev->dev_id ? i++ : i--) {
 445
 446                writel((readl(&dev->local->control) &
 447                                ~VLYNQ_CTRL_CLOCK_MASK) |
 448                                VLYNQ_CTRL_CLOCK_INT |
 449                                VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1),
 450                                &dev->local->control);
 451
 452                if (vlynq_linked(dev)) {
 453                        printk(KERN_DEBUG
 454                                "%s: using local clock divisor %d\n",
 455                                dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
 456                        dev->divisor = i;
 457                        return 0;
 458                } else {
 459                        vlynq_reset(dev);
 460                }
 461        }
 462
 463        return -ENODEV;
 464}
 465
 466/*
 467 * When using external clocking method, serial clock
 468 * is supplied by an external oscillator, therefore we
 469 * should mask the local clock bit in the clock control
 470 * register for both the bus master and the remote device.
 471 */
 472static int __vlynq_try_external(struct vlynq_device *dev)
 473{
 474        vlynq_reset(dev);
 475        if (!vlynq_linked(dev))
 476                return -ENODEV;
 477
 478        writel((readl(&dev->remote->control) &
 479                        ~VLYNQ_CTRL_CLOCK_INT),
 480                        &dev->remote->control);
 481
 482        writel((readl(&dev->local->control) &
 483                        ~VLYNQ_CTRL_CLOCK_INT),
 484                        &dev->local->control);
 485
 486        if (vlynq_linked(dev)) {
 487                printk(KERN_DEBUG "%s: using external clock\n",
 488                        dev_name(&dev->dev));
 489                        dev->divisor = vlynq_div_external;
 490                return 0;
 491        }
 492
 493        return -ENODEV;
 494}
 495
 496static int __vlynq_enable_device(struct vlynq_device *dev)
 497{
 498        int result;
 499        struct plat_vlynq_ops *ops = dev->dev.platform_data;
 500
 501        result = ops->on(dev);
 502        if (result)
 503                return result;
 504
 505        switch (dev->divisor) {
 506        case vlynq_div_external:
 507        case vlynq_div_auto:
 508                /* When the device is brought from reset it should have clock
 509                 * generation negotiated by hardware.
 510                 * Check which device is generating clocks and perform setup
 511                 * accordingly */
 512                if (vlynq_linked(dev) && readl(&dev->remote->control) &
 513                   VLYNQ_CTRL_CLOCK_INT) {
 514                        if (!__vlynq_try_remote(dev) ||
 515                                !__vlynq_try_local(dev)  ||
 516                                !__vlynq_try_external(dev))
 517                                return 0;
 518                } else {
 519                        if (!__vlynq_try_external(dev) ||
 520                                !__vlynq_try_local(dev)    ||
 521                                !__vlynq_try_remote(dev))
 522                                return 0;
 523                }
 524                break;
 525        case vlynq_ldiv1:
 526        case vlynq_ldiv2:
 527        case vlynq_ldiv3:
 528        case vlynq_ldiv4:
 529        case vlynq_ldiv5:
 530        case vlynq_ldiv6:
 531        case vlynq_ldiv7:
 532        case vlynq_ldiv8:
 533                writel(VLYNQ_CTRL_CLOCK_INT |
 534                        VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
 535                        vlynq_ldiv1), &dev->local->control);
 536                writel(0, &dev->remote->control);
 537                if (vlynq_linked(dev)) {
 538                        printk(KERN_DEBUG
 539                                "%s: using local clock divisor %d\n",
 540                                dev_name(&dev->dev),
 541                                dev->divisor - vlynq_ldiv1 + 1);
 542                        return 0;
 543                }
 544                break;
 545        case vlynq_rdiv1:
 546        case vlynq_rdiv2:
 547        case vlynq_rdiv3:
 548        case vlynq_rdiv4:
 549        case vlynq_rdiv5:
 550        case vlynq_rdiv6:
 551        case vlynq_rdiv7:
 552        case vlynq_rdiv8:
 553                writel(0, &dev->local->control);
 554                writel(VLYNQ_CTRL_CLOCK_INT |
 555                        VLYNQ_CTRL_CLOCK_DIV(dev->divisor -
 556                        vlynq_rdiv1), &dev->remote->control);
 557                if (vlynq_linked(dev)) {
 558                        printk(KERN_DEBUG
 559                                "%s: using remote clock divisor %d\n",
 560                                dev_name(&dev->dev),
 561                                dev->divisor - vlynq_rdiv1 + 1);
 562                        return 0;
 563                }
 564                break;
 565        }
 566
 567        ops->off(dev);
 568        return -ENODEV;
 569}
 570
 571int vlynq_enable_device(struct vlynq_device *dev)
 572{
 573        struct plat_vlynq_ops *ops = dev->dev.platform_data;
 574        int result = -ENODEV;
 575
 576        result = __vlynq_enable_device(dev);
 577        if (result)
 578                return result;
 579
 580        result = vlynq_setup_irq(dev);
 581        if (result)
 582                ops->off(dev);
 583
 584        dev->enabled = !result;
 585        return result;
 586}
 587EXPORT_SYMBOL(vlynq_enable_device);
 588
 589
 590void vlynq_disable_device(struct vlynq_device *dev)
 591{
 592        struct plat_vlynq_ops *ops = dev->dev.platform_data;
 593
 594        dev->enabled = 0;
 595        free_irq(dev->irq, dev);
 596        ops->off(dev);
 597}
 598EXPORT_SYMBOL(vlynq_disable_device);
 599
 600int vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset,
 601                            struct vlynq_mapping *mapping)
 602{
 603        int i;
 604
 605        if (!dev->enabled)
 606                return -ENXIO;
 607
 608        writel(tx_offset, &dev->local->tx_offset);
 609        for (i = 0; i < 4; i++) {
 610                writel(mapping[i].offset, &dev->local->rx_mapping[i].offset);
 611                writel(mapping[i].size, &dev->local->rx_mapping[i].size);
 612        }
 613        return 0;
 614}
 615EXPORT_SYMBOL(vlynq_set_local_mapping);
 616
 617int vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset,
 618                             struct vlynq_mapping *mapping)
 619{
 620        int i;
 621
 622        if (!dev->enabled)
 623                return -ENXIO;
 624
 625        writel(tx_offset, &dev->remote->tx_offset);
 626        for (i = 0; i < 4; i++) {
 627                writel(mapping[i].offset, &dev->remote->rx_mapping[i].offset);
 628                writel(mapping[i].size, &dev->remote->rx_mapping[i].size);
 629        }
 630        return 0;
 631}
 632EXPORT_SYMBOL(vlynq_set_remote_mapping);
 633
 634int vlynq_set_local_irq(struct vlynq_device *dev, int virq)
 635{
 636        int irq = dev->irq_start + virq;
 637        if (dev->enabled)
 638                return -EBUSY;
 639
 640        if ((irq < dev->irq_start) || (irq > dev->irq_end))
 641                return -EINVAL;
 642
 643        if (virq == dev->remote_irq)
 644                return -EINVAL;
 645
 646        dev->local_irq = virq;
 647
 648        return 0;
 649}
 650EXPORT_SYMBOL(vlynq_set_local_irq);
 651
 652int vlynq_set_remote_irq(struct vlynq_device *dev, int virq)
 653{
 654        int irq = dev->irq_start + virq;
 655        if (dev->enabled)
 656                return -EBUSY;
 657
 658        if ((irq < dev->irq_start) || (irq > dev->irq_end))
 659                return -EINVAL;
 660
 661        if (virq == dev->local_irq)
 662                return -EINVAL;
 663
 664        dev->remote_irq = virq;
 665
 666        return 0;
 667}
 668EXPORT_SYMBOL(vlynq_set_remote_irq);
 669
 670static int vlynq_probe(struct platform_device *pdev)
 671{
 672        struct vlynq_device *dev;
 673        struct resource *regs_res, *mem_res, *irq_res;
 674        int len, result;
 675
 676        regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
 677        if (!regs_res)
 678                return -ENODEV;
 679
 680        mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
 681        if (!mem_res)
 682                return -ENODEV;
 683
 684        irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq");
 685        if (!irq_res)
 686                return -ENODEV;
 687
 688        dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 689        if (!dev) {
 690                printk(KERN_ERR
 691                       "vlynq: failed to allocate device structure\n");
 692                return -ENOMEM;
 693        }
 694
 695        dev->id = pdev->id;
 696        dev->dev.bus = &vlynq_bus_type;
 697        dev->dev.parent = &pdev->dev;
 698        dev_set_name(&dev->dev, "vlynq%d", dev->id);
 699        dev->dev.platform_data = pdev->dev.platform_data;
 700        dev->dev.release = vlynq_device_release;
 701
 702        dev->regs_start = regs_res->start;
 703        dev->regs_end = regs_res->end;
 704        dev->mem_start = mem_res->start;
 705        dev->mem_end = mem_res->end;
 706
 707        len = resource_size(regs_res);
 708        if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
 709                printk(KERN_ERR "%s: Can't request vlynq registers\n",
 710                       dev_name(&dev->dev));
 711                result = -ENXIO;
 712                goto fail_request;
 713        }
 714
 715        dev->local = ioremap(regs_res->start, len);
 716        if (!dev->local) {
 717                printk(KERN_ERR "%s: Can't remap vlynq registers\n",
 718                       dev_name(&dev->dev));
 719                result = -ENXIO;
 720                goto fail_remap;
 721        }
 722
 723        dev->remote = (struct vlynq_regs *)((void *)dev->local +
 724                                            VLYNQ_REMOTE_OFFSET);
 725
 726        dev->irq = platform_get_irq_byname(pdev, "irq");
 727        dev->irq_start = irq_res->start;
 728        dev->irq_end = irq_res->end;
 729        dev->local_irq = dev->irq_end - dev->irq_start;
 730        dev->remote_irq = dev->local_irq - 1;
 731
 732        if (device_register(&dev->dev))
 733                goto fail_register;
 734        platform_set_drvdata(pdev, dev);
 735
 736        printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
 737               dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
 738               (void *)dev->mem_start);
 739
 740        dev->dev_id = 0;
 741        dev->divisor = vlynq_div_auto;
 742        result = __vlynq_enable_device(dev);
 743        if (result == 0) {
 744                dev->dev_id = readl(&dev->remote->chip);
 745                ((struct plat_vlynq_ops *)(dev->dev.platform_data))->off(dev);
 746        }
 747        if (dev->dev_id)
 748                printk(KERN_INFO "Found a VLYNQ device: %08x\n", dev->dev_id);
 749
 750        return 0;
 751
 752fail_register:
 753        iounmap(dev->local);
 754fail_remap:
 755fail_request:
 756        release_mem_region(regs_res->start, len);
 757        kfree(dev);
 758        return result;
 759}
 760
 761static int vlynq_remove(struct platform_device *pdev)
 762{
 763        struct vlynq_device *dev = platform_get_drvdata(pdev);
 764
 765        device_unregister(&dev->dev);
 766        iounmap(dev->local);
 767        release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start);
 768
 769        kfree(dev);
 770
 771        return 0;
 772}
 773
 774static struct platform_driver vlynq_platform_driver = {
 775        .driver.name = "vlynq",
 776        .probe = vlynq_probe,
 777        .remove = __devexit_p(vlynq_remove),
 778};
 779
 780struct bus_type vlynq_bus_type = {
 781        .name = "vlynq",
 782        .match = vlynq_device_match,
 783        .probe = vlynq_device_probe,
 784        .remove = vlynq_device_remove,
 785};
 786EXPORT_SYMBOL(vlynq_bus_type);
 787
 788static int __devinit vlynq_init(void)
 789{
 790        int res = 0;
 791
 792        res = bus_register(&vlynq_bus_type);
 793        if (res)
 794                goto fail_bus;
 795
 796        res = platform_driver_register(&vlynq_platform_driver);
 797        if (res)
 798                goto fail_platform;
 799
 800        return 0;
 801
 802fail_platform:
 803        bus_unregister(&vlynq_bus_type);
 804fail_bus:
 805        return res;
 806}
 807
 808static void __devexit vlynq_exit(void)
 809{
 810        platform_driver_unregister(&vlynq_platform_driver);
 811        bus_unregister(&vlynq_bus_type);
 812}
 813
 814module_init(vlynq_init);
 815module_exit(vlynq_exit);
 816
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.