/*
 *  linux/drivers/serial/imx.c
 *
 *  Driver for Motorola IMX serial ports
 *
 *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
 *
 *  Author: Sascha Hauer <sascha@saschahauer.de>
 *  Copyright (C) 2004 Pengutronix
 *
 *  Copyright (C) 2009 emlix GmbH
 *  Author: Fabian Godehardt (added IrDA support for iMX)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 * [29-Mar-2005] Mike Lee
 * Added hardware handshake
 */

#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif

#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/rational.h>
#include <linux/slab.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>

/* Register definitions */
#define URXD0 0x0  /* Receiver Register */
#define URTX0 0x40 /* Transmitter Register */
#define UCR1  0x80 /* Control Register 1 */
#define UCR2  0x84 /* Control Register 2 */
#define UCR3  0x88 /* Control Register 3 */
#define UCR4  0x8c /* Control Register 4 */
#define UFCR  0x90 /* FIFO Control Register */
#define USR1  0x94 /* Status Register 1 */
#define USR2  0x98 /* Status Register 2 */
#define UESC  0x9c /* Escape Character Register */
#define UTIM  0xa0 /* Escape Timer Register */
#define UBIR  0xa4 /* BRM Incremental Register */
#define UBMR  0xa8 /* BRM Modulator Register */
#define UBRC  0xac /* Baud Rate Count Register */
#define MX2_ONEMS 0xb0 /* One Millisecond register */
#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */

/* UART Control Register Bit Fields.*/
#define  URXD_CHARRDY    (1<<15)
#define  URXD_ERR        (1<<14)
#define  URXD_OVRRUN     (1<<13)
#define  URXD_FRMERR     (1<<12)
#define  URXD_BRK        (1<<11)
#define  URXD_PRERR      (1<<10)
#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
#define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
#define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
#define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
#define  UCR1_RRDYEN     (1<<9)  /* Recv ready interrupt enable */
#define  UCR1_RDMAEN     (1<<8)  /* Recv ready DMA enable */
#define  UCR1_IREN       (1<<7)  /* Infrared interface enable */
#define  UCR1_TXMPTYEN   (1<<6)  /* Transimitter empty interrupt enable */
#define  UCR1_RTSDEN     (1<<5)  /* RTS delta interrupt enable */
#define  UCR1_SNDBRK     (1<<4)  /* Send break */
#define  UCR1_TDMAEN     (1<<3)  /* Transmitter ready DMA enable */
#define  MX1_UCR1_UARTCLKEN  (1<<2)      /* UART clock enabled, mx1 only */
#define  UCR1_DOZE       (1<<1)  /* Doze */
#define  UCR1_UARTEN     (1<<0)  /* UART enabled */
#define  UCR2_ESCI       (1<<15) /* Escape seq interrupt enable */
#define  UCR2_IRTS       (1<<14) /* Ignore RTS pin */
#define  UCR2_CTSC       (1<<13) /* CTS pin control */
#define  UCR2_CTS        (1<<12) /* Clear to send */
#define  UCR2_ESCEN      (1<<11) /* Escape enable */
#define  UCR2_PREN       (1<<8)  /* Parity enable */
#define  UCR2_PROE       (1<<7)  /* Parity odd/even */
#define  UCR2_STPB       (1<<6)  /* Stop */
#define  UCR2_WS         (1<<5)  /* Word size */
#define  UCR2_RTSEN      (1<<4)  /* Request to send interrupt enable */
#define  UCR2_TXEN       (1<<2)  /* Transmitter enabled */
#define  UCR2_RXEN       (1<<1)  /* Receiver enabled */
#define  UCR2_SRST       (1<<0)  /* SW reset */
#define  UCR3_DTREN      (1<<13) /* DTR interrupt enable */
#define  UCR3_PARERREN   (1<<12) /* Parity enable */
#define  UCR3_FRAERREN   (1<<11) /* Frame error interrupt enable */
#define  UCR3_DSR        (1<<10) /* Data set ready */
#define  UCR3_DCD        (1<<9)  /* Data carrier detect */
#define  UCR3_RI         (1<<8)  /* Ring indicator */
#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
#define  UCR3_RXDSEN     (1<<6)  /* Receive status interrupt enable */
#define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
#define  UCR3_AWAKEN     (1<<4)  /* Async wake interrupt enable */
#define  MX1_UCR3_REF25          (1<<3)  /* Ref freq 25 MHz, only on mx1 */
#define  MX1_UCR3_REF30          (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
#define  MX2_UCR3_RXDMUXSEL      (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
#define  UCR3_INVT       (1<<1)  /* Inverted Infrared transmission */
#define  UCR3_BPEN       (1<<0)  /* Preset registers enable */
#define  UCR4_CTSTL_SHF  10      /* CTS trigger level shift */
#define  UCR4_CTSTL_MASK 0x3F    /* CTS trigger is 6 bits wide */
#define  UCR4_INVR       (1<<9)  /* Inverted infrared reception */
#define  UCR4_ENIRI      (1<<8)  /* Serial infrared interrupt enable */
#define  UCR4_WKEN       (1<<7)  /* Wake interrupt enable */
#define  UCR4_REF16      (1<<6)  /* Ref freq 16 MHz */
#define  UCR4_IRSC       (1<<5)  /* IR special case */
#define  UCR4_TCEN       (1<<3)  /* Transmit complete interrupt enable */
#define  UCR4_BKEN       (1<<2)  /* Break condition interrupt enable */
#define  UCR4_OREN       (1<<1)  /* Receiver overrun interrupt enable */
#define  UCR4_DREN       (1<<0)  /* Recv data ready interrupt enable */
#define  UFCR_RXTL_SHF   0       /* Receiver trigger level shift */
#define  UFCR_RFDIV      (7<<7)  /* Reference freq divider mask */
#define  UFCR_RFDIV_REG(x)      (((x) < 7 ? 6 - (x) : 6) << 7)
#define  UFCR_TXTL_SHF   10      /* Transmitter trigger level shift */
#define  USR1_PARITYERR  (1<<15) /* Parity error interrupt flag */
#define  USR1_RTSS       (1<<14) /* RTS pin status */
#define  USR1_TRDY       (1<<13) /* Transmitter ready interrupt/dma flag */
#define  USR1_RTSD       (1<<12) /* RTS delta */
#define  USR1_ESCF       (1<<11) /* Escape seq interrupt flag */
#define  USR1_FRAMERR    (1<<10) /* Frame error interrupt flag */
#define  USR1_RRDY       (1<<9)  /* Receiver ready interrupt/dma flag */
#define  USR1_TIMEOUT    (1<<7)  /* Receive timeout interrupt status */
#define  USR1_RXDS       (1<<6)  /* Receiver idle interrupt flag */
#define  USR1_AIRINT     (1<<5)  /* Async IR wake interrupt flag */
#define  USR1_AWAKE      (1<<4)  /* Aysnc wake interrupt flag */
#define  USR2_ADET       (1<<15) /* Auto baud rate detect complete */
#define  USR2_TXFE       (1<<14) /* Transmit buffer FIFO empty */
#define  USR2_DTRF       (1<<13) /* DTR edge interrupt flag */
#define  USR2_IDLE       (1<<12) /* Idle condition */
#define  USR2_IRINT      (1<<8)  /* Serial infrared interrupt flag */
#define  USR2_WAKE       (1<<7)  /* Wake */
#define  USR2_RTSF       (1<<4)  /* RTS edge interrupt flag */
#define  USR2_TXDC       (1<<3)  /* Transmitter complete */
#define  USR2_BRCD       (1<<2)  /* Break condition */
#define  USR2_ORE        (1<<1)  /* Overrun error */
#define  USR2_RDR        (1<<0)  /* Recv data ready */
#define  UTS_FRCPERR     (1<<13) /* Force parity error */
#define  UTS_LOOP        (1<<12) /* Loop tx and rx */
#define  UTS_TXEMPTY     (1<<6)  /* TxFIFO empty */
#define  UTS_RXEMPTY     (1<<5)  /* RxFIFO empty */
#define  UTS_TXFULL      (1<<4)  /* TxFIFO full */
#define  UTS_RXFULL      (1<<3)  /* RxFIFO full */
#define  UTS_SOFTRST     (1<<0)  /* Software reset */

/* We've been assigned a range on the "Low-density serial ports" major */
#define SERIAL_IMX_MAJOR        207
#define MINOR_START             16
#define DEV_NAME                "ttymxc"
#define MAX_INTERNAL_IRQ        MXC_INTERNAL_IRQS

/*
 * This determines how often we check the modem status signals
 * for any change.  They generally aren't connected to an IRQ
 * so we have to poll them.  We also check immediately before
 * filling the TX fifo incase CTS has been dropped.
 */
#define MCTRL_TIMEOUT   (250*HZ/1000)

#define DRIVER_NAME "IMX-uart"

#define UART_NR 8

struct imx_port {
        struct uart_port        port;
        struct timer_list       timer;
        unsigned int            old_status;
        int                     txirq,rxirq,rtsirq;
        unsigned int            have_rtscts:1;
        unsigned int            use_irda:1;
        unsigned int            irda_inv_rx:1;
        unsigned int            irda_inv_tx:1;
        unsigned short          trcv_delay; /* transceiver delay */
        struct clk              *clk;
};

#ifdef CONFIG_IRDA
#define USE_IRDA(sport) ((sport)->use_irda)
#else
#define USE_IRDA(sport) (0)
#endif

/*
 * Handle any change of modem status signal since we were last called.
 */
static void imx_mctrl_check(struct imx_port *sport)
{
        unsigned int status, changed;

        status = sport->port.ops->get_mctrl(&sport->port);
        changed = status ^ sport->old_status;

        if (changed == 0)
                return;

        sport->old_status = status;

        if (changed & TIOCM_RI)
                sport->port.icount.rng++;
        if (changed & TIOCM_DSR)
                sport->port.icount.dsr++;
        if (changed & TIOCM_CAR)
                uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
        if (changed & TIOCM_CTS)
                uart_handle_cts_change(&sport->port, status & TIOCM_CTS);

        wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
}

/*
 * This is our per-port timeout handler, for checking the
 * modem status signals.
 */
static void imx_timeout(unsigned long data)
{
        struct imx_port *sport = (struct imx_port *)data;
        unsigned long flags;

        if (sport->port.state) {
                spin_lock_irqsave(&sport->port.lock, flags);
                imx_mctrl_check(sport);
                spin_unlock_irqrestore(&sport->port.lock, flags);

                mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
        }
}

/*
 * interrupts disabled on entry
 */
static void imx_stop_tx(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;

        if (USE_IRDA(sport)) {
                /* half duplex - wait for end of transmission */
                int n = 256;
                while ((--n > 0) &&
                      !(readl(sport->port.membase + USR2) & USR2_TXDC)) {
                        udelay(5);
                        barrier();
                }
                /*
                 * irda transceiver - wait a bit more to avoid
                 * cutoff, hardware dependent
                 */
                udelay(sport->trcv_delay);

                /*
                 * half duplex - reactivate receive mode,
                 * flush receive pipe echo crap
                 */
                if (readl(sport->port.membase + USR2) & USR2_TXDC) {
                        temp = readl(sport->port.membase + UCR1);
                        temp &= ~(UCR1_TXMPTYEN | UCR1_TRDYEN);
                        writel(temp, sport->port.membase + UCR1);

                        temp = readl(sport->port.membase + UCR4);
                        temp &= ~(UCR4_TCEN);
                        writel(temp, sport->port.membase + UCR4);

                        while (readl(sport->port.membase + URXD0) &
                               URXD_CHARRDY)
                                barrier();

                        temp = readl(sport->port.membase + UCR1);
                        temp |= UCR1_RRDYEN;
                        writel(temp, sport->port.membase + UCR1);

                        temp = readl(sport->port.membase + UCR4);
                        temp |= UCR4_DREN;
                        writel(temp, sport->port.membase + UCR4);
                }
                return;
        }

        temp = readl(sport->port.membase + UCR1);
        writel(temp & ~UCR1_TXMPTYEN, sport->port.membase + UCR1);
}

/*
 * interrupts disabled on entry
 */
static void imx_stop_rx(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;

        temp = readl(sport->port.membase + UCR2);
        writel(temp &~ UCR2_RXEN, sport->port.membase + UCR2);
}

/*
 * Set the modem control timer to fire immediately.
 */
static void imx_enable_ms(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;

        mod_timer(&sport->timer, jiffies);
}

static inline void imx_transmit_buffer(struct imx_port *sport)
{
        struct circ_buf *xmit = &sport->port.state->xmit;

        while (!(readl(sport->port.membase + UTS) & UTS_TXFULL)) {
                /* send xmit->buf[xmit->tail]
                 * out the port here */
                writel(xmit->buf[xmit->tail], sport->port.membase + URTX0);
                xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
                sport->port.icount.tx++;
                if (uart_circ_empty(xmit))
                        break;
        }

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&sport->port);

        if (uart_circ_empty(xmit))
                imx_stop_tx(&sport->port);
}

/*
 * interrupts disabled on entry
 */
static void imx_start_tx(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;

        if (USE_IRDA(sport)) {
                /* half duplex in IrDA mode; have to disable receive mode */
                temp = readl(sport->port.membase + UCR4);
                temp &= ~(UCR4_DREN);
                writel(temp, sport->port.membase + UCR4);

                temp = readl(sport->port.membase + UCR1);
                temp &= ~(UCR1_RRDYEN);
                writel(temp, sport->port.membase + UCR1);
        }

        temp = readl(sport->port.membase + UCR1);
        writel(temp | UCR1_TXMPTYEN, sport->port.membase + UCR1);

        if (USE_IRDA(sport)) {
                temp = readl(sport->port.membase + UCR1);
                temp |= UCR1_TRDYEN;
                writel(temp, sport->port.membase + UCR1);

                temp = readl(sport->port.membase + UCR4);
                temp |= UCR4_TCEN;
                writel(temp, sport->port.membase + UCR4);
        }

        if (readl(sport->port.membase + UTS) & UTS_TXEMPTY)
                imx_transmit_buffer(sport);
}

static irqreturn_t imx_rtsint(int irq, void *dev_id)
{
        struct imx_port *sport = dev_id;
        unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
        unsigned long flags;

        spin_lock_irqsave(&sport->port.lock, flags);

        writel(USR1_RTSD, sport->port.membase + USR1);
        uart_handle_cts_change(&sport->port, !!val);
        wake_up_interruptible(&sport->port.state->port.delta_msr_wait);

        spin_unlock_irqrestore(&sport->port.lock, flags);
        return IRQ_HANDLED;
}

static irqreturn_t imx_txint(int irq, void *dev_id)
{
        struct imx_port *sport = dev_id;
        struct circ_buf *xmit = &sport->port.state->xmit;
        unsigned long flags;

        spin_lock_irqsave(&sport->port.lock,flags);
        if (sport->port.x_char)
        {
                /* Send next char */
                writel(sport->port.x_char, sport->port.membase + URTX0);
                goto out;
        }

        if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
                imx_stop_tx(&sport->port);
                goto out;
        }

        imx_transmit_buffer(sport);

        if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
                uart_write_wakeup(&sport->port);

out:
        spin_unlock_irqrestore(&sport->port.lock,flags);
        return IRQ_HANDLED;
}

static irqreturn_t imx_rxint(int irq, void *dev_id)
{
        struct imx_port *sport = dev_id;
        unsigned int rx,flg,ignored = 0;
        struct tty_struct *tty = sport->port.state->port.tty;
        unsigned long flags, temp;

        spin_lock_irqsave(&sport->port.lock,flags);

        while (readl(sport->port.membase + USR2) & USR2_RDR) {
                flg = TTY_NORMAL;
                sport->port.icount.rx++;

                rx = readl(sport->port.membase + URXD0);

                temp = readl(sport->port.membase + USR2);
                if (temp & USR2_BRCD) {
                        writel(USR2_BRCD, sport->port.membase + USR2);
                        if (uart_handle_break(&sport->port))
                                continue;
                }

                if (uart_handle_sysrq_char(&sport->port, (unsigned char)rx))
                        continue;

                if (rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) {
                        if (rx & URXD_PRERR)
                                sport->port.icount.parity++;
                        else if (rx & URXD_FRMERR)
                                sport->port.icount.frame++;
                        if (rx & URXD_OVRRUN)
                                sport->port.icount.overrun++;

                        if (rx & sport->port.ignore_status_mask) {
                                if (++ignored > 100)
                                        goto out;
                                continue;
                        }

                        rx &= sport->port.read_status_mask;

                        if (rx & URXD_PRERR)
                                flg = TTY_PARITY;
                        else if (rx & URXD_FRMERR)
                                flg = TTY_FRAME;
                        if (rx & URXD_OVRRUN)
                                flg = TTY_OVERRUN;

#ifdef SUPPORT_SYSRQ
                        sport->port.sysrq = 0;
#endif
                }

                tty_insert_flip_char(tty, rx, flg);
        }

out:
        spin_unlock_irqrestore(&sport->port.lock,flags);
        tty_flip_buffer_push(tty);
        return IRQ_HANDLED;
}

static irqreturn_t imx_int(int irq, void *dev_id)
{
        struct imx_port *sport = dev_id;
        unsigned int sts;

        sts = readl(sport->port.membase + USR1);

        if (sts & USR1_RRDY)
                imx_rxint(irq, dev_id);

        if (sts & USR1_TRDY &&
                        readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN)
                imx_txint(irq, dev_id);

        if (sts & USR1_RTSD)
                imx_rtsint(irq, dev_id);

        return IRQ_HANDLED;
}

/*
 * Return TIOCSER_TEMT when transmitter is not busy.
 */
static unsigned int imx_tx_empty(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;

        return (readl(sport->port.membase + USR2) & USR2_TXDC) ?  TIOCSER_TEMT : 0;
}

/*
 * We have a modem side uart, so the meanings of RTS and CTS are inverted.
 */
static unsigned int imx_get_mctrl(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned int tmp = TIOCM_DSR | TIOCM_CAR;

        if (readl(sport->port.membase + USR1) & USR1_RTSS)
                tmp |= TIOCM_CTS;

        if (readl(sport->port.membase + UCR2) & UCR2_CTS)
                tmp |= TIOCM_RTS;

        return tmp;
}

static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;

        temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS;

        if (mctrl & TIOCM_RTS)
                temp |= UCR2_CTS;

        writel(temp, sport->port.membase + UCR2);
}

/*
 * Interrupts always disabled.
 */
static void imx_break_ctl(struct uart_port *port, int break_state)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long flags, temp;

        spin_lock_irqsave(&sport->port.lock, flags);

        temp = readl(sport->port.membase + UCR1) & ~UCR1_SNDBRK;

        if ( break_state != 0 )
                temp |= UCR1_SNDBRK;

        writel(temp, sport->port.membase + UCR1);

        spin_unlock_irqrestore(&sport->port.lock, flags);
}

#define TXTL 2 /* reset default */
#define RXTL 1 /* reset default */

static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
{
        unsigned int val;
        unsigned int ufcr_rfdiv;

        /* set receiver / transmitter trigger level.
         * RFDIV is set such way to satisfy requested uartclk value
         */
        val = TXTL << 10 | RXTL;
        ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2)
                        / sport->port.uartclk;

        if(!ufcr_rfdiv)
                ufcr_rfdiv = 1;

        val |= UFCR_RFDIV_REG(ufcr_rfdiv);

        writel(val, sport->port.membase + UFCR);

        return 0;
}

/* half the RX buffer size */
#define CTSTL 16

static int imx_startup(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;
        int retval;
        unsigned long flags, temp;

        imx_setup_ufcr(sport, 0);

        /* disable the DREN bit (Data Ready interrupt enable) before
         * requesting IRQs
         */
        temp = readl(sport->port.membase + UCR4);

        if (USE_IRDA(sport))
                temp |= UCR4_IRSC;

        /* set the trigger level for CTS */
        temp &= ~(UCR4_CTSTL_MASK<<  UCR4_CTSTL_SHF);
        temp |= CTSTL<<  UCR4_CTSTL_SHF;

        writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);

        if (USE_IRDA(sport)) {
                /* reset fifo's and state machines */
                int i = 100;
                temp = readl(sport->port.membase + UCR2);
                temp &= ~UCR2_SRST;
                writel(temp, sport->port.membase + UCR2);
                while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
                    (--i > 0)) {
                        udelay(1);
                }
        }

        /*
         * Allocate the IRQ(s) i.MX1 has three interrupts whereas later
         * chips only have one interrupt.
         */
        if (sport->txirq > 0) {
                retval = request_irq(sport->rxirq, imx_rxint, 0,
                                DRIVER_NAME, sport);
                if (retval)
                        goto error_out1;

                retval = request_irq(sport->txirq, imx_txint, 0,
                                DRIVER_NAME, sport);
                if (retval)
                        goto error_out2;

                /* do not use RTS IRQ on IrDA */
                if (!USE_IRDA(sport)) {
                        retval = request_irq(sport->rtsirq, imx_rtsint,
                                     (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 :
                                       IRQF_TRIGGER_FALLING |
                                       IRQF_TRIGGER_RISING,
                                        DRIVER_NAME, sport);
                        if (retval)
                                goto error_out3;
                }
        } else {
                retval = request_irq(sport->port.irq, imx_int, 0,
                                DRIVER_NAME, sport);
                if (retval) {
                        free_irq(sport->port.irq, sport);
                        goto error_out1;
                }
        }

        /*
         * Finally, clear and enable interrupts
         */
        writel(USR1_RTSD, sport->port.membase + USR1);

        temp = readl(sport->port.membase + UCR1);
        temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;

        if (USE_IRDA(sport)) {
                temp |= UCR1_IREN;
                temp &= ~(UCR1_RTSDEN);
        }

        writel(temp, sport->port.membase + UCR1);

        temp = readl(sport->port.membase + UCR2);
        temp |= (UCR2_RXEN | UCR2_TXEN);
        writel(temp, sport->port.membase + UCR2);

        if (USE_IRDA(sport)) {
                /* clear RX-FIFO */
                int i = 64;
                while ((--i > 0) &&
                        (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
                        barrier();
                }
        }

        if (!cpu_is_mx1()) {
                temp = readl(sport->port.membase + UCR3);
                temp |= MX2_UCR3_RXDMUXSEL;
                writel(temp, sport->port.membase + UCR3);
        }

        if (USE_IRDA(sport)) {
                temp = readl(sport->port.membase + UCR4);
                if (sport->irda_inv_rx)
                        temp |= UCR4_INVR;
                else
                        temp &= ~(UCR4_INVR);
                writel(temp | UCR4_DREN, sport->port.membase + UCR4);

                temp = readl(sport->port.membase + UCR3);
                if (sport->irda_inv_tx)
                        temp |= UCR3_INVT;
                else
                        temp &= ~(UCR3_INVT);
                writel(temp, sport->port.membase + UCR3);
        }

        /*
         * Enable modem status interrupts
         */
        spin_lock_irqsave(&sport->port.lock,flags);
        imx_enable_ms(&sport->port);
        spin_unlock_irqrestore(&sport->port.lock,flags);

        if (USE_IRDA(sport)) {
                struct imxuart_platform_data *pdata;
                pdata = sport->port.dev->platform_data;
                sport->irda_inv_rx = pdata->irda_inv_rx;
                sport->irda_inv_tx = pdata->irda_inv_tx;
                sport->trcv_delay = pdata->transceiver_delay;
                if (pdata->irda_enable)
                        pdata->irda_enable(1);
        }

        return 0;

error_out3:
        if (sport->txirq)
                free_irq(sport->txirq, sport);
error_out2:
        if (sport->rxirq)
                free_irq(sport->rxirq, sport);
error_out1:
        return retval;
}

static void imx_shutdown(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long temp;

        temp = readl(sport->port.membase + UCR2);
        temp &= ~(UCR2_TXEN);
        writel(temp, sport->port.membase + UCR2);

        if (USE_IRDA(sport)) {
                struct imxuart_platform_data *pdata;
                pdata = sport->port.dev->platform_data;
                if (pdata->irda_enable)
                        pdata->irda_enable(0);
        }

        /*
         * Stop our timer.
         */
        del_timer_sync(&sport->timer);

        /*
         * Free the interrupts
         */
        if (sport->txirq > 0) {
                if (!USE_IRDA(sport))
                        free_irq(sport->rtsirq, sport);
                free_irq(sport->txirq, sport);
                free_irq(sport->rxirq, sport);
        } else
                free_irq(sport->port.irq, sport);

        /*
         * Disable all interrupts, port and break condition.
         */

        temp = readl(sport->port.membase + UCR1);
        temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
        if (USE_IRDA(sport))
                temp &= ~(UCR1_IREN);

        writel(temp, sport->port.membase + UCR1);
}

static void
imx_set_termios(struct uart_port *port, struct ktermios *termios,
                   struct ktermios *old)
{
        struct imx_port *sport = (struct imx_port *)port;
        unsigned long flags;
        unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
        unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
        unsigned int div, ufcr;
        unsigned long num, denom;
        uint64_t tdiv64;

        /*
         * If we don't support modem control lines, don't allow
         * these to be set.
         */
        if (0) {
                termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
                termios->c_cflag |= CLOCAL;
        }

        /*
         * We only support CS7 and CS8.
         */
        while ((termios->c_cflag & CSIZE) != CS7 &&
               (termios->c_cflag & CSIZE) != CS8) {
                termios->c_cflag &= ~CSIZE;
                termios->c_cflag |= old_csize;
                old_csize = CS8;
        }

        if ((termios->c_cflag & CSIZE) == CS8)
                ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
        else
                ucr2 = UCR2_SRST | UCR2_IRTS;

        if (termios->c_cflag & CRTSCTS) {
                if( sport->have_rtscts ) {
                        ucr2 &= ~UCR2_IRTS;
                        ucr2 |= UCR2_CTSC;
                } else {
                        termios->c_cflag &= ~CRTSCTS;
                }
        }

        if (termios->c_cflag & CSTOPB)
                ucr2 |= UCR2_STPB;
        if (termios->c_cflag & PARENB) {
                ucr2 |= UCR2_PREN;
                if (termios->c_cflag & PARODD)
                        ucr2 |= UCR2_PROE;
        }

        /*
         * Ask the core to calculate the divisor for us.
         */
        baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
        quot = uart_get_divisor(port, baud);

        spin_lock_irqsave(&sport->port.lock, flags);

        sport->port.read_status_mask = 0;
        if (termios->c_iflag & INPCK)
                sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
        if (termios->c_iflag & (BRKINT | PARMRK))
                sport->port.read_status_mask |= URXD_BRK;

        /*
         * Characters to ignore
         */
        sport->port.ignore_status_mask = 0;
        if (termios->c_iflag & IGNPAR)
                sport->port.ignore_status_mask |= URXD_PRERR;
        if (termios->c_iflag & IGNBRK) {
                sport->port.ignore_status_mask |= URXD_BRK;
                /*
                 * If we're ignoring parity and break indicators,
                 * ignore overruns too (for real raw support).
                 */
                if (termios->c_iflag & IGNPAR)
                        sport->port.ignore_status_mask |= URXD_OVRRUN;
        }

        del_timer_sync(&sport->timer);

        /*
         * Update the per-port timeout.
         */
        uart_update_timeout(port, termios->c_cflag, baud);

        /*
         * disable interrupts and drain transmitter
         */
        old_ucr1 = readl(sport->port.membase + UCR1);
        writel(old_ucr1 & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
                        sport->port.membase + UCR1);

        while ( !(readl(sport->port.membase + USR2) & USR2_TXDC))
                barrier();

        /* then, disable everything */
        old_txrxen = readl(sport->port.membase + UCR2);
        writel(old_txrxen & ~( UCR2_TXEN | UCR2_RXEN),
                        sport->port.membase + UCR2);
        old_txrxen &= (UCR2_TXEN | UCR2_RXEN);

        if (USE_IRDA(sport)) {
                /*
                 * use maximum available submodule frequency to
                 * avoid missing short pulses due to low sampling rate
                 */
                div = 1;
        } else {
                div = sport->port.uartclk / (baud * 16);
                if (div > 7)
                        div = 7;
                if (!div)
                        div = 1;
        }

        rational_best_approximation(16 * div * baud, sport->port.uartclk,
                1 << 16, 1 << 16, &num, &denom);

        tdiv64 = sport->port.uartclk;
        tdiv64 *= num;
        do_div(tdiv64, denom * 16 * div);
        tty_termios_encode_baud_rate(termios,
                                (speed_t)tdiv64, (speed_t)tdiv64);

        num -= 1;
        denom -= 1;

        ufcr = readl(sport->port.membase + UFCR);
        ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
        writel(ufcr, sport->port.membase + UFCR);

        writel(num, sport->port.membase + UBIR);
        writel(denom, sport->port.membase + UBMR);

        if (!cpu_is_mx1())
                writel(sport->port.uartclk / div / 1000,
                                sport->port.membase + MX2_ONEMS);

        writel(old_ucr1, sport->port.membase + UCR1);

        /* set the parity, stop bits and data size */
        writel(ucr2 | old_txrxen, sport->port.membase + UCR2);

        if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
                imx_enable_ms(&sport->port);

        spin_unlock_irqrestore(&sport->port.lock, flags);
}

static const char *imx_type(struct uart_port *port)
{
        struct imx_port *sport = (struct imx_port *)port;

        return sport->port.type == PORT_IMX ? "IMX" : NULL;
}

/*
 * Release the memory region(s) being used by 'port'.
 */
static void imx_release_port(struct uart_port *port)
{
        struct platform_device *pdev = to_platform_device(port->dev);
        struct resource *mmres;

        mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        release_mem_region(mmres->start, mmres->end - mmres->start + 1);
}

/*
 * Request the memory region(s) being used by 'port'.
 */
static int imx_request_port(struct uart_port *port)
{
        struct platform_device *pdev = to_platform_device(port->dev);
        struct resource *mmres;
        void *ret;

        mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!mmres)
                return -ENODEV;

        ret = request_mem_region(mmres->start, mmres->end - mmres->start + 1,
                        "imx-uart");

        return  ret ? 0 : -EBUSY;
}

/*
 * Configure/autoconfigure the port.
 */
static void imx_config_port(struct uart_port *port, int flags)
{
        struct imx_port *sport = (struct imx_port *)port;

        if (flags & UART_CONFIG_TYPE &&
            imx_request_port(&sport->port) == 0)
                sport->port.type = PORT_IMX;
}

/*
 * Verify the new serial_struct (for TIOCSSERIAL).
 * The only change we allow are to the flags and type, and
 * even then only between PORT_IMX and PORT_UNKNOWN
 */
static int
imx_verify_port(struct uart_port *port, struct serial_struct *ser)
{

        struct imx_port *sport = (struct imx_port *)port;
        int ret = 0;

        if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
                ret = -EINVAL;
        if (sport->port.irq != ser->irq)
                ret = -EINVAL;
        if (ser->io_type != UPIO_MEM)
                ret = -EINVAL;
        if (sport->port.uartclk / 16 != ser->baud_base)
                ret = -EINVAL;
        if ((void *)sport->port.mapbase != ser->iomem_base)
                ret = -EINVAL;
        if (sport->port.iobase != ser->port)
                ret = -EINVAL;
        if (ser->hub6 != 0)
                ret = -EINVAL;
        return ret;
}

static struct uart_ops imx_pops = {
        .tx_empty       = imx_tx_empty,
        .set_mctrl      = imx_set_mctrl,
        .get_mctrl      = imx_get_mctrl,
        .stop_tx        = imx_stop_tx,
        .start_tx       = imx_start_tx,
        .stop_rx        = imx_stop_rx,
        .enable_ms      = imx_enable_ms,
        .break_ctl      = imx_break_ctl,
        .startup        = imx_startup,
        .shutdown       = imx_shutdown,
        .set_termios    = imx_set_termios,
        .type           = imx_type,
        .release_port   = imx_release_port,
        .request_port   = imx_request_port,
        .config_port    = imx_config_port,
        .verify_port    = imx_verify_port,
};

static struct imx_port *imx_ports[UART_NR];

#ifdef CONFIG_SERIAL_IMX_CONSOLE
static void imx_console_putchar(struct uart_port *port, int ch)
{
        struct imx_port *sport = (struct imx_port *)port;

        while (readl(sport->port.membase + UTS) & UTS_TXFULL)
                barrier();

        writel(ch, sport->port.membase + URTX0);
}

/*
 * Interrupts are disabled on entering
 */
static void
imx_console_write(struct console *co, const char *s, unsigned int count)
{
        struct imx_port *sport = imx_ports[co->index];
        unsigned int old_ucr1, old_ucr2, ucr1;

        /*
         *      First, save UCR1/2 and then disable interrupts
         */
        ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
        old_ucr2 = readl(sport->port.membase + UCR2);

        if (cpu_is_mx1())
                ucr1 |= MX1_UCR1_UARTCLKEN;
        ucr1 |= UCR1_UARTEN;
        ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);

        writel(ucr1, sport->port.membase + UCR1);

        writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);

        uart_console_write(&sport->port, s, count, imx_console_putchar);

        /*
         *      Finally, wait for transmitter to become empty
         *      and restore UCR1/2
         */
        while (!(readl(sport->port.membase + USR2) & USR2_TXDC));

        writel(old_ucr1, sport->port.membase + UCR1);
        writel(old_ucr2, sport->port.membase + UCR2);
}

/*
 * If the port was already initialised (eg, by a boot loader),
 * try to determine the current setup.
 */
static void __init
imx_console_get_options(struct imx_port *sport, int *baud,
                           int *parity, int *bits)
{

        if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
                /* ok, the port was enabled */
                unsigned int ucr2, ubir,ubmr, uartclk;
                unsigned int baud_raw;
                unsigned int ucfr_rfdiv;

                ucr2 = readl(sport->port.membase + UCR2);

                *parity = 'n';
                if (ucr2 & UCR2_PREN) {
                        if (ucr2 & UCR2_PROE)
                                *parity = 'o';
                        else
                                *parity = 'e';
                }

                if (ucr2 & UCR2_WS)
                        *bits = 8;
                else
                        *bits = 7;

                ubir = readl(sport->port.membase + UBIR) & 0xffff;
                ubmr = readl(sport->port.membase + UBMR) & 0xffff;

                ucfr_rfdiv = (readl(sport->port.membase + UFCR) & UFCR_RFDIV) >> 7;
                if (ucfr_rfdiv == 6)
                        ucfr_rfdiv = 7;
                else
                        ucfr_rfdiv = 6 - ucfr_rfdiv;

                uartclk = clk_get_rate(sport->clk);
                uartclk /= ucfr_rfdiv;

                {       /*
                         * The next code provides exact computation of
                         *   baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
                         * without need of float support or long long division,
                         * which would be required to prevent 32bit arithmetic overflow
                         */
                        unsigned int mul = ubir + 1;
                        unsigned int div = 16 * (ubmr + 1);
                        unsigned int rem = uartclk % div;

                        baud_raw = (uartclk / div) * mul;
                        baud_raw += (rem * mul + div / 2) / div;
                        *baud = (baud_raw + 50) / 100 * 100;
                }

                if(*baud != baud_raw)
                        printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
                                baud_raw, *baud);
        }
}

static int __init
imx_console_setup(struct console *co, char *options)
{
        struct imx_port *sport;
        int baud = 9600;
        int bits = 8;
        int parity = 'n';
        int flow = 'n';

        /*
         * Check whether an invalid uart number has been specified, and
         * if so, search for the first available port that does have
         * console support.
         */
        if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
                co->index = 0;
        sport = imx_ports[co->index];
        if(sport == NULL)
                return -ENODEV;

        if (options)
                uart_parse_options(options, &baud, &parity, &bits, &flow);
        else
                imx_console_get_options(sport, &baud, &parity, &bits);

        imx_setup_ufcr(sport, 0);

        return uart_set_options(&sport->port, co, baud, parity, bits, flow);
}

static struct uart_driver imx_reg;
static struct console imx_console = {
        .name           = DEV_NAME,
        .write          = imx_console_write,
        .device         = uart_console_device,
        .setup          = imx_console_setup,
        .flags          = CON_PRINTBUFFER,
        .index          = -1,
        .data           = &imx_reg,
};

#define IMX_CONSOLE     &imx_console
#else
#define IMX_CONSOLE     NULL
#endif

static struct uart_driver imx_reg = {
        .owner          = THIS_MODULE,
        .driver_name    = DRIVER_NAME,
        .dev_name       = DEV_NAME,
        .major          = SERIAL_IMX_MAJOR,
        .minor          = MINOR_START,
        .nr             = ARRAY_SIZE(imx_ports),
        .cons           = IMX_CONSOLE,
};

static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
{
        struct imx_port *sport = platform_get_drvdata(dev);

        if (sport)
                uart_suspend_port(&imx_reg, &sport->port);

        return 0;
}

static int serial_imx_resume(struct platform_device *dev)
{
        struct imx_port *sport = platform_get_drvdata(dev);

        if (sport)
                uart_resume_port(&imx_reg, &sport->port);

        return 0;
}

static int serial_imx_probe(struct platform_device *pdev)
{
        struct imx_port *sport;
        struct imxuart_platform_data *pdata;
        void __iomem *base;
        int ret = 0;
        struct resource *res;

        sport = kzalloc(sizeof(*sport), GFP_KERNEL);
        if (!sport)
                return -ENOMEM;

        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!res) {
                ret = -ENODEV;
                goto free;
        }

        base = ioremap(res->start, PAGE_SIZE);
        if (!base) {
                ret = -ENOMEM;
                goto free;
        }

        sport->port.dev = &pdev->dev;
        sport->port.mapbase = res->start;
        sport->port.membase = base;
        sport->port.type = PORT_IMX,
        sport->port.iotype = UPIO_MEM;
        sport->port.irq = platform_get_irq(pdev, 0);
        sport->rxirq = platform_get_irq(pdev, 0);
        sport->txirq = platform_get_irq(pdev, 1);
        sport->rtsirq = platform_get_irq(pdev, 2);
        sport->port.fifosize = 32;
        sport->port.ops = &imx_pops;
        sport->port.flags = UPF_BOOT_AUTOCONF;
        sport->port.line = pdev->id;
        init_timer(&sport->timer);
        sport->timer.function = imx_timeout;
        sport->timer.data     = (unsigned long)sport;

        sport->clk = clk_get(&pdev->dev, "uart");
        if (IS_ERR(sport->clk)) {
                ret = PTR_ERR(sport->clk);
                goto unmap;
        }
        clk_enable(sport->clk);

        sport->port.uartclk = clk_get_rate(sport->clk);

        imx_ports[pdev->id] = sport;

        pdata = pdev->dev.platform_data;
        if (pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
                sport->have_rtscts = 1;

#ifdef CONFIG_IRDA
        if (pdata && (pdata->flags & IMXUART_IRDA))
                sport->use_irda = 1;
#endif

        if (pdata && pdata->init) {
                ret = pdata->init(pdev);
                if (ret)
                        goto clkput;
        }

        ret = uart_add_one_port(&imx_reg, &sport->port);
        if (ret)
                goto deinit;
        platform_set_drvdata(pdev, &sport->port);

        return 0;
deinit:
        if (pdata && pdata->exit)
                pdata->exit(pdev);
clkput:
        clk_put(sport->clk);
        clk_disable(sport->clk);
unmap:
        iounmap(sport->port.membase);
free:
        kfree(sport);

        return ret;
}

static int serial_imx_remove(struct platform_device *pdev)
{
        struct imxuart_platform_data *pdata;
        struct imx_port *sport = platform_get_drvdata(pdev);

        pdata = pdev->dev.platform_data;

        platform_set_drvdata(pdev, NULL);

        if (sport) {
                uart_remove_one_port(&imx_reg, &sport->port);
                clk_put(sport->clk);
        }

        clk_disable(sport->clk);

        if (pdata && pdata->exit)
                pdata->exit(pdev);

        iounmap(sport->port.membase);
        kfree(sport);

        return 0;
}

static struct platform_driver serial_imx_driver = {
        .probe          = serial_imx_probe,
        .remove         = serial_imx_remove,

        .suspend        = serial_imx_suspend,
        .resume         = serial_imx_resume,
        .driver         = {
                .name   = "imx-uart",
                .owner  = THIS_MODULE,
        },
};

static int __init imx_serial_init(void)
{
        int ret;

        printk(KERN_INFO "Serial: IMX driver\n");

        ret = uart_register_driver(&imx_reg);
        if (ret)
                return ret;

        ret = platform_driver_register(&serial_imx_driver);
        if (ret != 0)
                uart_unregister_driver(&imx_reg);

        return 0;
}

static void __exit imx_serial_exit(void)
{
        platform_driver_unregister(&serial_imx_driver);
        uart_unregister_driver(&imx_reg);
}

module_init(imx_serial_init);
module_exit(imx_serial_exit);

MODULE_AUTHOR("Sascha Hauer");
MODULE_DESCRIPTION("IMX generic serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:imx-uart");