1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_V4L2 8 default y 9 ---help--- 10 Say Y here to enable selecting AM/FM radio adapters. 11 12if RADIO_ADAPTERS && VIDEO_V4L2 13 14config RADIO_CADET 15 tristate "ADS Cadet AM/FM Tuner" 16 depends on ISA && VIDEO_V4L2 17 ---help--- 18 Choose Y here if you have one of these AM/FM radio cards, and then 19 fill in the port address below. 20 21 In order to control your radio card, you will need to use programs 22 that are compatible with the Video For Linux API. Information on 23 this API and pointers to "v4l" programs may be found at 24 <file:Documentation/video4linux/API.html>. 25 26 Further documentation on this driver can be found on the WWW at 27 <http://linux.blackhawke.net/cadet/>. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-cadet. 31 32config RADIO_RTRACK 33 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 34 depends on ISA && VIDEO_V4L2 35 ---help--- 36 Choose Y here if you have one of these FM radio cards, and then fill 37 in the port address below. 38 39 Note that newer AIMSlab RadioTrack cards have a different chipset 40 and are not supported by this driver. For these cards, use the 41 RadioTrack II driver below. 42 43 If you have a GemTeks combined (PnP) sound- and radio card you must 44 use this driver as a module and setup the card with isapnptools. 45 You must also pass the module a suitable io parameter, 0x248 has 46 been reported to be used by these cards. 47 48 In order to control your radio card, you will need to use programs 49 that are compatible with the Video For Linux API. Information on 50 this API and pointers to "v4l" programs may be found at 51 <file:Documentation/video4linux/API.html>. More information is 52 contained in the file 53 <file:Documentation/video4linux/radiotrack.txt>. 54 55 To compile this driver as a module, choose M here: the 56 module will be called radio-aimslab. 57 58config RADIO_RTRACK_PORT 59 hex "RadioTrack i/o port (0x20f or 0x30f)" 60 depends on RADIO_RTRACK=y 61 default "20f" 62 help 63 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 64 haven't changed the jumper setting on the card. 65 66config RADIO_RTRACK2 67 tristate "AIMSlab RadioTrack II support" 68 depends on ISA && VIDEO_V4L2 69 ---help--- 70 Choose Y here if you have this FM radio card, and then fill in the 71 port address below. 72 73 In order to control your radio card, you will need to use programs 74 that are compatible with the Video For Linux API. Information on 75 this API and pointers to "v4l" programs may be found at 76 <file:Documentation/video4linux/API.html>. 77 78 To compile this driver as a module, choose M here: the 79 module will be called radio-rtrack2. 80 81config RADIO_RTRACK2_PORT 82 hex "RadioTrack II i/o port (0x20c or 0x30c)" 83 depends on RADIO_RTRACK2=y 84 default "30c" 85 help 86 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 87 haven't changed the jumper setting on the card. 88 89config RADIO_AZTECH 90 tristate "Aztech/Packard Bell Radio" 91 depends on ISA && VIDEO_V4L2 92 ---help--- 93 Choose Y here if you have one of these FM radio cards, and then fill 94 in the port address below. 95 96 In order to control your radio card, you will need to use programs 97 that are compatible with the Video For Linux API. Information on 98 this API and pointers to "v4l" programs may be found at 99 <file:Documentation/video4linux/API.html>. 100 101 To compile this driver as a module, choose M here: the 102 module will be called radio-aztech. 103 104config RADIO_AZTECH_PORT 105 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 106 depends on RADIO_AZTECH=y 107 default "350" 108 help 109 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 110 haven't changed the setting of jumper JP3 on the card. Removing the 111 jumper sets the card to 0x358. 112 113config RADIO_GEMTEK 114 tristate "GemTek Radio card (or compatible) support" 115 depends on ISA && VIDEO_V4L2 116 ---help--- 117 Choose Y here if you have this FM radio card, and then fill in the 118 I/O port address and settings below. The following cards either have 119 GemTek Radio tuner or are rebranded GemTek Radio cards: 120 121 - Sound Vision 16 Gold with FM Radio 122 - Typhoon Radio card (some models) 123 - Hama Radio card 124 125 In order to control your radio card, you will need to use programs 126 that are compatible with the Video For Linux API. Information on 127 this API and pointers to "v4l" programs may be found at 128 <file:Documentation/video4linux/API.html>. 129 130 To compile this driver as a module, choose M here: the 131 module will be called radio-gemtek. 132 133config RADIO_GEMTEK_PORT 134 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" 135 depends on RADIO_GEMTEK=y 136 default "34c" 137 help 138 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is 139 0x34c, if you haven't changed the jumper setting on the card. On 140 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 141 port is 0x20c, 0x248 or 0x28c. 142 If automatic I/O port probing is enabled this port will be used only 143 in case of automatic probing failure, ie. as a fallback. 144 145config RADIO_GEMTEK_PROBE 146 bool "Automatic I/O port probing" 147 depends on RADIO_GEMTEK=y 148 default y 149 help 150 Say Y here to enable automatic probing for GemTek Radio card. The 151 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 152 0x28c. 153 154config RADIO_GEMTEK_PCI 155 tristate "GemTek PCI Radio Card support" 156 depends on VIDEO_V4L2 && PCI 157 ---help--- 158 Choose Y here if you have this PCI FM radio card. 159 160 In order to control your radio card, you will need to use programs 161 that are compatible with the Video for Linux API. Information on 162 this API and pointers to "v4l" programs may be found at 163 <file:Documentation/video4linux/API.html>. 164 165 To compile this driver as a module, choose M here: the 166 module will be called radio-gemtek-pci. 167 168config RADIO_MAXIRADIO 169 tristate "Guillemot MAXI Radio FM 2000 radio" 170 depends on VIDEO_V4L2 && PCI 171 ---help--- 172 Choose Y here if you have this radio card. This card may also be 173 found as Gemtek PCI FM. 174 175 In order to control your radio card, you will need to use programs 176 that are compatible with the Video For Linux API. Information on 177 this API and pointers to "v4l" programs may be found at 178 <file:Documentation/video4linux/API.html>. 179 180 To compile this driver as a module, choose M here: the 181 module will be called radio-maxiradio. 182 183config RADIO_MAESTRO 184 tristate "Maestro on board radio" 185 depends on VIDEO_V4L2 && PCI 186 ---help--- 187 Say Y here to directly support the on-board radio tuner on the 188 Maestro 2 or 2E sound card. 189 190 In order to control your radio card, you will need to use programs 191 that are compatible with the Video For Linux API. Information on 192 this API and pointers to "v4l" programs may be found at 193 <file:Documentation/video4linux/API.html>. 194 195 To compile this driver as a module, choose M here: the 196 module will be called radio-maestro. 197 198config RADIO_MIROPCM20 199 tristate "miroSOUND PCM20 radio" 200 depends on ISA && VIDEO_V4L2 && SND 201 select SND_ISA 202 select SND_MIRO 203 ---help--- 204 Choose Y here if you have this FM radio card. You also need to enable 205 the ALSA sound system. This choice automatically selects the ALSA 206 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this 207 is required for the radio-miropcm20. 208 209 In order to control your radio card, you will need to use programs 210 that are compatible with the Video For Linux API. Information on 211 this API and pointers to "v4l" programs may be found at 212 <file:Documentation/video4linux/API.html>. 213 214 To compile this driver as a module, choose M here: the 215 module will be called radio-miropcm20. 216 217config RADIO_SF16FMI 218 tristate "SF16-FMI/SF16-FMP Radio" 219 depends on ISA && VIDEO_V4L2 220 ---help--- 221 Choose Y here if you have one of these FM radio cards. 222 223 In order to control your radio card, you will need to use programs 224 that are compatible with the Video For Linux API. Information on 225 this API and pointers to "v4l" programs may be found at 226 <file:Documentation/video4linux/API.html>. 227 228 To compile this driver as a module, choose M here: the 229 module will be called radio-sf16fmi. 230 231config RADIO_SF16FMR2 232 tristate "SF16FMR2 Radio" 233 depends on ISA && VIDEO_V4L2 234 ---help--- 235 Choose Y here if you have one of these FM radio cards. 236 237 In order to control your radio card, you will need to use programs 238 that are compatible with the Video For Linux API. Information on 239 this API and pointers to "v4l" programs may be found on the WWW at 240 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. 241 242 To compile this driver as a module, choose M here: the 243 module will be called radio-sf16fmr2. 244 245config RADIO_TERRATEC 246 tristate "TerraTec ActiveRadio ISA Standalone" 247 depends on ISA && VIDEO_V4L2 248 ---help--- 249 Choose Y here if you have this FM radio card, and then fill in the 250 port address below. (TODO) 251 252 Note: This driver is in its early stages. Right now volume and 253 frequency control and muting works at least for me, but 254 unfortunately I have not found anybody who wants to use this card 255 with Linux. So if it is this what YOU are trying to do right now, 256 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. 257 258 In order to control your radio card, you will need to use programs 259 that are compatible with the Video For Linux API. Information on 260 this API and pointers to "v4l" programs may be found at 261 <file:Documentation/video4linux/API.html>. 262 263 To compile this driver as a module, choose M here: the 264 module will be called radio-terratec. 265 266config RADIO_TERRATEC_PORT 267 hex "Terratec i/o port (normally 0x590)" 268 depends on RADIO_TERRATEC=y 269 default "590" 270 help 271 Fill in the I/O port of your TerraTec FM radio card. If unsure, go 272 with the default. 273 274config RADIO_TRUST 275 tristate "Trust FM radio card" 276 depends on ISA && VIDEO_V4L2 277 help 278 This is a driver for the Trust FM radio cards. Say Y if you have 279 such a card and want to use it under Linux. 280 281 To compile this driver as a module, choose M here: the 282 module will be called radio-trust. 283 284config RADIO_TRUST_PORT 285 hex "Trust i/o port (usually 0x350 or 0x358)" 286 depends on RADIO_TRUST=y 287 default "350" 288 help 289 Enter the I/O port of your Trust FM radio card. If unsure, try the 290 values "0x350" or "0x358". 291 292config RADIO_TYPHOON 293 tristate "Typhoon Radio (a.k.a. EcoRadio)" 294 depends on ISA && VIDEO_V4L2 295 ---help--- 296 Choose Y here if you have one of these FM radio cards, and then fill 297 in the port address and the frequency used for muting below. 298 299 In order to control your radio card, you will need to use programs 300 that are compatible with the Video For Linux API. Information on 301 this API and pointers to "v4l" programs may be found at 302 <file:Documentation/video4linux/API.html>. 303 304 To compile this driver as a module, choose M here: the 305 module will be called radio-typhoon. 306 307config RADIO_TYPHOON_PORT 308 hex "Typhoon I/O port (0x316 or 0x336)" 309 depends on RADIO_TYPHOON=y 310 default "316" 311 help 312 Enter the I/O port of your Typhoon or EcoRadio radio card. 313 314config RADIO_TYPHOON_MUTEFREQ 315 int "Typhoon frequency set when muting the device (kHz)" 316 depends on RADIO_TYPHOON=y 317 default "87500" 318 help 319 Enter the frequency used for muting the radio. The device is never 320 completely silent. If the volume is just turned down, you can still 321 hear silent voices and music. For that reason, the frequency of the 322 radio device is set to the frequency you can enter here whenever 323 the device is muted. There should be no local radio station at that 324 frequency. 325 326config RADIO_ZOLTRIX 327 tristate "Zoltrix Radio" 328 depends on ISA && VIDEO_V4L2 329 ---help--- 330 Choose Y here if you have one of these FM radio cards, and then fill 331 in the port address below. 332 333 In order to control your radio card, you will need to use programs 334 that are compatible with the Video For Linux API. Information on 335 this API and pointers to "v4l" programs may be found at 336 <file:Documentation/video4linux/API.html>. 337 338 To compile this driver as a module, choose M here: the 339 module will be called radio-zoltrix. 340 341config RADIO_ZOLTRIX_PORT 342 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 343 depends on RADIO_ZOLTRIX=y 344 default "20c" 345 help 346 Enter the I/O port of your Zoltrix radio card. 347 348config I2C_SI4713 349 tristate "I2C driver for Silicon Labs Si4713 device" 350 depends on I2C && VIDEO_V4L2 351 ---help--- 352 Say Y here if you want support to Si4713 I2C device. 353 This device driver supports only i2c bus. 354 355 To compile this driver as a module, choose M here: the 356 module will be called si4713. 357 358config RADIO_SI4713 359 tristate "Silicon Labs Si4713 FM Radio Transmitter support" 360 depends on I2C && VIDEO_V4L2 361 select I2C_SI4713 362 ---help--- 363 Say Y here if you want support to Si4713 FM Radio Transmitter. 364 This device can transmit audio through FM. It can transmit 365 RDS and RBDS signals as well. This module is the v4l2 radio 366 interface for the i2c driver of this device. 367 368 To compile this driver as a module, choose M here: the 369 module will be called radio-si4713. 370 371config USB_DSBR 372 tristate "D-Link/GemTek USB FM radio support" 373 depends on USB && VIDEO_V4L2 374 ---help--- 375 Say Y here if you want to connect this type of radio to your 376 computer's USB port. Note that the audio is not digital, and 377 you must connect the line out connector to a sound card or a 378 set of speakers. 379 380 To compile this driver as a module, choose M here: the 381 module will be called dsbr100. 382 383config RADIO_SI470X 384 bool "Silicon Labs Si470x FM Radio Receiver support" 385 depends on VIDEO_V4L2 386 387source "drivers/media/radio/si470x/Kconfig" 388 389config USB_MR800 390 tristate "AverMedia MR 800 USB FM radio support" 391 depends on USB && VIDEO_V4L2 392 ---help--- 393 Say Y here if you want to connect this type of radio to your 394 computer's USB port. Note that the audio is not digital, and 395 you must connect the line out connector to a sound card or a 396 set of speakers. 397 398 To compile this driver as a module, choose M here: the 399 module will be called radio-mr800. 400 401config RADIO_TEA5764 402 tristate "TEA5764 I2C FM radio support" 403 depends on I2C && VIDEO_V4L2 404 ---help--- 405 Say Y here if you want to use the TEA5764 FM chip found in 406 EZX phones. This FM chip is present in EZX phones from Motorola, 407 connected to internal pxa I2C bus. 408 409 To compile this driver as a module, choose M here: the 410 module will be called radio-tea5764. 411 412config RADIO_TEA5764_XTAL 413 bool "TEA5764 crystal reference" 414 depends on RADIO_TEA5764=y 415 default y 416 help 417 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 418 here if TEA5764 reference frequency is connected in FREQIN. 419 420config RADIO_SAA7706H 421 tristate "SAA7706H Car Radio DSP" 422 depends on I2C && VIDEO_V4L2 423 ---help--- 424 Say Y here if you want to use the SAA7706H Car radio Digital 425 Signal Processor, found for instance on the Russellville development 426 board. On the russellville the device is connected to internal 427 timberdale I2C bus. 428 429 To compile this driver as a module, choose M here: the 430 module will be called SAA7706H. 431 432config RADIO_TEF6862 433 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" 434 depends on I2C && VIDEO_V4L2 435 ---help--- 436 Say Y here if you want to use the TEF6862 Car Radio Enhanced 437 Selectivity Tuner, found for instance on the Russellville development 438 board. On the russellville the device is connected to internal 439 timberdale I2C bus. 440 441 To compile this driver as a module, choose M here: the 442 module will be called TEF6862. 443 444config RADIO_TIMBERDALE 445 tristate "Enable the Timberdale radio driver" 446 depends on MFD_TIMBERDALE && VIDEO_V4L2 447 depends on I2C # for RADIO_SAA7706H 448 select RADIO_TEF6862 449 select RADIO_SAA7706H 450 ---help--- 451 This is a kind of umbrella driver for the Radio Tuner and DSP 452 found behind the Timberdale FPGA on the Russellville board. 453 Enabling this driver will automatically select the DSP and tuner. 454 455endif # RADIO_ADAPTERS 456