/*
 * i2c-smbus.c - SMBus extensions to the I2C protocol
 *
 * Copyright (C) 2008 David Brownell
 * Copyright (C) 2010 Jean Delvare <khali@linux-fr.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/i2c-smbus.h>
#include <linux/slab.h>

struct i2c_smbus_alert {
        unsigned int            alert_edge_triggered:1;
        int                     irq;
        struct work_struct      alert;
        struct i2c_client       *ara;           /* Alert response address */
};

struct alert_data {
        unsigned short          addr;
        u8                      flag:1;
};

/* If this is the alerting device, notify its driver */
static int smbus_do_alert(struct device *dev, void *addrp)
{
        struct i2c_client *client = i2c_verify_client(dev);
        struct alert_data *data = addrp;

        if (!client || client->addr != data->addr)
                return 0;
        if (client->flags & I2C_CLIENT_TEN)
                return 0;

        /*
         * Drivers should either disable alerts, or provide at least
         * a minimal handler.  Lock so client->driver won't change.
         */
        device_lock(dev);
        if (client->driver) {
                if (client->driver->alert)
                        client->driver->alert(client, data->flag);
                else
                        dev_warn(&client->dev, "no driver alert()!\n");
        } else
                dev_dbg(&client->dev, "alert with no driver\n");
        device_unlock(dev);

        /* Stop iterating after we find the device */
        return -EBUSY;
}

/*
 * The alert IRQ handler needs to hand work off to a task which can issue
 * SMBus calls, because those sleeping calls can't be made in IRQ context.
 */
static void smbus_alert(struct work_struct *work)
{
        struct i2c_smbus_alert *alert;
        struct i2c_client *ara;
        unsigned short prev_addr = 0;   /* Not a valid address */

        alert = container_of(work, struct i2c_smbus_alert, alert);
        ara = alert->ara;

        for (;;) {
                s32 status;
                struct alert_data data;

                /*
                 * Devices with pending alerts reply in address order, low
                 * to high, because of slave transmit arbitration.  After
                 * responding, an SMBus device stops asserting SMBALERT#.
                 *
                 * Note that SMBus 2.0 reserves 10-bit addresess for future
                 * use.  We neither handle them, nor try to use PEC here.
                 */
                status = i2c_smbus_read_byte(ara);
                if (status < 0)
                        break;

                data.flag = status & 1;
                data.addr = status >> 1;

                if (data.addr == prev_addr) {
                        dev_warn(&ara->dev, "Duplicate SMBALERT# from dev "
                                "0x%02x, skipping\n", data.addr);
                        break;
                }
                dev_dbg(&ara->dev, "SMBALERT# from dev 0x%02x, flag %d\n",
                        data.addr, data.flag);

                /* Notify driver for the device which issued the alert */
                device_for_each_child(&ara->adapter->dev, &data,
                                      smbus_do_alert);
                prev_addr = data.addr;
        }

        /* We handled all alerts; re-enable level-triggered IRQs */
        if (!alert->alert_edge_triggered)
                enable_irq(alert->irq);
}

static irqreturn_t smbalert_irq(int irq, void *d)
{
        struct i2c_smbus_alert *alert = d;

        /* Disable level-triggered IRQs until we handle them */
        if (!alert->alert_edge_triggered)
                disable_irq_nosync(irq);

        schedule_work(&alert->alert);
        return IRQ_HANDLED;
}

/* Setup SMBALERT# infrastructure */
static int smbalert_probe(struct i2c_client *ara,
                          const struct i2c_device_id *id)
{
        struct i2c_smbus_alert_setup *setup = ara->dev.platform_data;
        struct i2c_smbus_alert *alert;
        struct i2c_adapter *adapter = ara->adapter;
        int res;

        alert = kzalloc(sizeof(struct i2c_smbus_alert), GFP_KERNEL);
        if (!alert)
                return -ENOMEM;

        alert->alert_edge_triggered = setup->alert_edge_triggered;
        alert->irq = setup->irq;
        INIT_WORK(&alert->alert, smbus_alert);
        alert->ara = ara;

        if (setup->irq > 0) {
                res = devm_request_irq(&ara->dev, setup->irq, smbalert_irq,
                                       0, "smbus_alert", alert);
                if (res) {
                        kfree(alert);
                        return res;
                }
        }

        i2c_set_clientdata(ara, alert);
        dev_info(&adapter->dev, "supports SMBALERT#, %s trigger\n",
                 setup->alert_edge_triggered ? "edge" : "level");

        return 0;
}

/* IRQ resource is managed so it is freed automatically */
static int smbalert_remove(struct i2c_client *ara)
{
        struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);

        cancel_work_sync(&alert->alert);

        kfree(alert);
        return 0;
}

static const struct i2c_device_id smbalert_ids[] = {
        { "smbus_alert", 0 },
        { /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, smbalert_ids);

static struct i2c_driver smbalert_driver = {
        .driver = {
                .name   = "smbus_alert",
        },
        .probe          = smbalert_probe,
        .remove         = smbalert_remove,
        .id_table       = smbalert_ids,
};

/**
 * i2c_setup_smbus_alert - Setup SMBus alert support
 * @adapter: the target adapter
 * @setup: setup data for the SMBus alert handler
 * Context: can sleep
 *
 * Setup handling of the SMBus alert protocol on a given I2C bus segment.
 *
 * Handling can be done either through our IRQ handler, or by the
 * adapter (from its handler, periodic polling, or whatever).
 *
 * NOTE that if we manage the IRQ, we *MUST* know if it's level or
 * edge triggered in order to hand it to the workqueue correctly.
 * If triggering the alert seems to wedge the system, you probably
 * should have said it's level triggered.
 *
 * This returns the ara client, which should be saved for later use with
 * i2c_handle_smbus_alert() and ultimately i2c_unregister_device(); or NULL
 * to indicate an error.
 */
struct i2c_client *i2c_setup_smbus_alert(struct i2c_adapter *adapter,
                                         struct i2c_smbus_alert_setup *setup)
{
        struct i2c_board_info ara_board_info = {
                I2C_BOARD_INFO("smbus_alert", 0x0c),
                .platform_data = setup,
        };

        return i2c_new_device(adapter, &ara_board_info);
}
EXPORT_SYMBOL_GPL(i2c_setup_smbus_alert);

/**
 * i2c_handle_smbus_alert - Handle an SMBus alert
 * @ara: the ARA client on the relevant adapter
 * Context: can't sleep
 *
 * Helper function to be called from an I2C bus driver's interrupt
 * handler. It will schedule the alert work, in turn calling the
 * corresponding I2C device driver's alert function.
 *
 * It is assumed that ara is a valid i2c client previously returned by
 * i2c_setup_smbus_alert().
 */
int i2c_handle_smbus_alert(struct i2c_client *ara)
{
        struct i2c_smbus_alert *alert = i2c_get_clientdata(ara);

        return schedule_work(&alert->alert);
}
EXPORT_SYMBOL_GPL(i2c_handle_smbus_alert);

static int __init i2c_smbus_init(void)
{
        return i2c_add_driver(&smbalert_driver);
}

static void __exit i2c_smbus_exit(void)
{
        i2c_del_driver(&smbalert_driver);
}

module_init(i2c_smbus_init);
module_exit(i2c_smbus_exit);

MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("SMBus protocol extensions support");
MODULE_LICENSE("GPL");