LXR linux/arch/mn10300/unit-asb2303/include/unit/serial.h

   1/* ASB2303-specific 8250 serial ports
   2 *
   3 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
   4 * Written by David Howells (dhowells@redhat.com)
   5 *
   6 * This program is free software; you can redistribute it and/or
   7 * modify it under the terms of the GNU General Public Licence
   8 * as published by the Free Software Foundation; either version
   9 * 2 of the Licence, or (at your option) any later version.
  10 */
  11
  12#ifndef _ASM_UNIT_SERIAL_H
  13#define _ASM_UNIT_SERIAL_H
  14
  15#include <asm/cpu-regs.h>
  16#include <proc/irq.h>
  17#include <linux/serial_reg.h>
  18
  19#define SERIAL_PORT0_BASE_ADDRESS       0xA6FB0000
  20#define SERIAL_PORT1_BASE_ADDRESS       0xA6FC0000
  21
  22#define SERIAL_IRQ      XIRQ0   /* Dual serial (PC16552)        (Hi) */
  23
  24/*
  25 * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
  26 */
  27#ifndef CONFIG_GDBSTUB_ON_TTYSx
  28
  29#define SERIAL_PORT_DFNS                                                \
  30        {                                                               \
  31        .baud_base              = BASE_BAUD,                            \
  32        .irq                    = SERIAL_IRQ,                           \
  33        .flags                  = STD_COM_FLAGS,                        \
  34        .iomem_base             = (u8 *) SERIAL_PORT0_BASE_ADDRESS,     \
  35        .iomem_reg_shift        = 2,                                    \
  36        .io_type                = SERIAL_IO_MEM,                        \
  37        },                                                              \
  38        {                                                               \
  39        .baud_base              = BASE_BAUD,                            \
  40        .irq                    = SERIAL_IRQ,                           \
  41        .flags                  = STD_COM_FLAGS,                        \
  42        .iomem_base             = (u8 *) SERIAL_PORT1_BASE_ADDRESS,     \
  43        .iomem_reg_shift        = 2,                                    \
  44        .io_type                = SERIAL_IO_MEM,                        \
  45        },
  46
  47#ifndef __ASSEMBLY__
  48
  49static inline void __debug_to_serial(const char *p, int n)
  50{
  51}
  52
  53#endif /* !__ASSEMBLY__ */
  54
  55#else /* CONFIG_GDBSTUB_ON_TTYSx */
  56
  57#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
  58
  59#if defined(CONFIG_GDBSTUB_ON_TTYS0)
  60#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
  61#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
  62#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
  63#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
  64#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
  65#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
  66#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
  67#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
  68#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
  69#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
  70#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
  71#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
  72#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
  73
  74#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
  75#define GDBPORT_SERIAL_RX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
  76#define GDBPORT_SERIAL_TX       __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
  77#define GDBPORT_SERIAL_DLL      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
  78#define GDBPORT_SERIAL_DLM      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
  79#define GDBPORT_SERIAL_IER      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
  80#define GDBPORT_SERIAL_IIR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
  81#define GDBPORT_SERIAL_FCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
  82#define GDBPORT_SERIAL_LCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
  83#define GDBPORT_SERIAL_MCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
  84#define GDBPORT_SERIAL_LSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
  85#define GDBPORT_SERIAL_MSR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
  86#define GDBPORT_SERIAL_SCR      __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
  87#define GDBPORT_SERIAL_IRQ      SERIAL_IRQ
  88#endif
  89
  90#ifndef __ASSEMBLY__
  91
  92#define LSR_WAIT_FOR(STATE)                                     \
  93do {                                                            \
  94        while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}     \
  95} while (0)
  96#define FLOWCTL_WAIT_FOR(LINE)                                  \
  97do {                                                            \
  98        while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}      \
  99} while (0)
 100#define FLOWCTL_CLEAR(LINE)                     \
 101do {                                            \
 102        GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
 103} while (0)
 104#define FLOWCTL_SET(LINE)                       \
 105do {                                            \
 106        GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;  \
 107} while (0)
 108#define FLOWCTL_QUERY(LINE)     ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
 109
 110static inline void __debug_to_serial(const char *p, int n)
 111{
 112        char ch;
 113
 114        FLOWCTL_SET(DTR);
 115
 116        for (; n > 0; n--) {
 117                LSR_WAIT_FOR(THRE);
 118                FLOWCTL_WAIT_FOR(CTS);
 119
 120                ch = *p++;
 121                if (ch == 0x0a) {
 122                        GDBPORT_SERIAL_TX = 0x0d;
 123                        LSR_WAIT_FOR(THRE);
 124                        FLOWCTL_WAIT_FOR(CTS);
 125                }
 126                GDBPORT_SERIAL_TX = ch;
 127        }
 128
 129        FLOWCTL_CLEAR(DTR);
 130}
 131
 132#endif /* !__ASSEMBLY__ */
 133
 134#endif /* CONFIG_GDBSTUB_ON_TTYSx */
 135
 136#endif /* _ASM_UNIT_SERIAL_H */
 137