1# 2# Input core configuration 3# 4menuconfig INPUT_KEYBOARD 5 bool "Keyboards" if EMBEDDED || !X86 6 default y 7 help 8 Say Y here, and a list of supported keyboards will be displayed. 9 This option doesn't affect the kernel. 10 11 If unsure, say Y. 12 13if INPUT_KEYBOARD 14 15config KEYBOARD_AAED2000 16 tristate "AAED-2000 keyboard" 17 depends on MACH_AAED2000 18 select INPUT_POLLDEV 19 default y 20 help 21 Say Y here to enable the keyboard on the Agilent AAED-2000 22 development board. 23 24 To compile this driver as a module, choose M here: the 25 module will be called aaed2000_kbd. 26 27config KEYBOARD_ADP5520 28 tristate "Keypad Support for ADP5520 PMIC" 29 depends on PMIC_ADP5520 30 help 31 This option enables support for the keypad scan matrix 32 on Analog Devices ADP5520 PMICs. 33 34 To compile this driver as a module, choose M here: the module will 35 be called adp5520-keys. 36 37config KEYBOARD_ADP5588 38 tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" 39 depends on I2C 40 help 41 Say Y here if you want to use a ADP5588/87 attached to your 42 system I2C bus. 43 44 To compile this driver as a module, choose M here: the 45 module will be called adp5588-keys. 46 47config KEYBOARD_AMIGA 48 tristate "Amiga keyboard" 49 depends on AMIGA 50 help 51 Say Y here if you are running Linux on any AMIGA and have a keyboard 52 attached. 53 54 To compile this driver as a module, choose M here: the 55 module will be called amikbd. 56 57config ATARI_KBD_CORE 58 bool 59 60config KEYBOARD_ATARI 61 tristate "Atari keyboard" 62 depends on ATARI 63 select ATARI_KBD_CORE 64 help 65 Say Y here if you are running Linux on any Atari and have a keyboard 66 attached. 67 68 To compile this driver as a module, choose M here: the 69 module will be called atakbd. 70 71config KEYBOARD_ATKBD 72 tristate "AT keyboard" if EMBEDDED || !X86 73 default y 74 select SERIO 75 select SERIO_LIBPS2 76 select SERIO_I8042 if X86 77 select SERIO_GSCPS2 if GSC 78 help 79 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually 80 you'll need this, unless you have a different type keyboard (USB, ADB 81 or other). This also works for AT and PS/2 keyboards connected over a 82 PS/2 to serial converter. 83 84 If unsure, say Y. 85 86 To compile this driver as a module, choose M here: the 87 module will be called atkbd. 88 89config KEYBOARD_ATKBD_HP_KEYCODES 90 bool "Use HP keyboard scancodes" 91 depends on PARISC && KEYBOARD_ATKBD 92 default y 93 help 94 Say Y here if you have a PA-RISC machine and want to use an AT or 95 PS/2 keyboard, and your keyboard uses keycodes that are specific to 96 PA-RISC keyboards. 97 98 Say N if you use a standard keyboard. 99 100config KEYBOARD_ATKBD_RDI_KEYCODES 101 bool "Use PrecisionBook keyboard scancodes" 102 depends on KEYBOARD_ATKBD_HP_KEYCODES 103 default n 104 help 105 If you have an RDI PrecisionBook, say Y here if you want to use its 106 built-in keyboard (as opposed to an external keyboard). 107 108 The PrecisionBook has five keys that conflict with those used by most 109 AT and PS/2 keyboards. These are as follows: 110 111 PrecisionBook Standard AT or PS/2 112 113 F1 F12 114 Left Ctrl Left Alt 115 Caps Lock Left Ctrl 116 Right Ctrl Caps Lock 117 Left 102nd key (the key to the right of Left Shift) 118 119 If you say N here, and use the PrecisionBook keyboard, then each key 120 in the left-hand column will be interpreted as the corresponding key 121 in the right-hand column. 122 123 If you say Y here, and use an external keyboard, then each key in the 124 right-hand column will be interpreted as the key shown in the 125 left-hand column. 126 127config QT2160 128 tristate "Atmel AT42QT2160 Touch Sensor Chip" 129 depends on I2C && EXPERIMENTAL 130 help 131 If you say yes here you get support for Atmel AT42QT2160 Touch 132 Sensor chip as a keyboard input. 133 134 This driver can also be built as a module. If so, the module 135 will be called qt2160. 136 137config KEYBOARD_BFIN 138 tristate "Blackfin BF54x keypad support" 139 depends on (BF54x && !BF544) 140 help 141 Say Y here if you want to use the BF54x keypad. 142 143 To compile this driver as a module, choose M here: the 144 module will be called bf54x-keys. 145 146config KEYBOARD_CORGI 147 tristate "Corgi keyboard (deprecated)" 148 depends on PXA_SHARPSL 149 help 150 Say Y here to enable the keyboard on the Sharp Zaurus SL-C7xx 151 series of PDAs. 152 153 This driver is now deprecated, use generic GPIO based matrix 154 keyboard driver instead. 155 156 To compile this driver as a module, choose M here: the 157 module will be called corgikbd. 158 159config KEYBOARD_LKKBD 160 tristate "DECstation/VAXstation LK201/LK401 keyboard" 161 select SERIO 162 help 163 Say Y here if you want to use a LK201 or LK401 style serial 164 keyboard. This keyboard is also useable on PCs if you attach 165 it with the inputattach program. The connector pinout is 166 described within lkkbd.c. 167 168 To compile this driver as a module, choose M here: the 169 module will be called lkkbd. 170 171config KEYBOARD_EP93XX 172 tristate "EP93xx Matrix Keypad support" 173 depends on ARCH_EP93XX 174 help 175 Say Y here to enable the matrix keypad on the Cirrus EP93XX. 176 177 To compile this driver as a module, choose M here: the 178 module will be called ep93xx_keypad. 179 180config KEYBOARD_GPIO 181 tristate "GPIO Buttons" 182 depends on GENERIC_GPIO 183 help 184 This driver implements support for buttons connected 185 to GPIO pins of various CPUs (and some other chips). 186 187 Say Y here if your device has buttons connected 188 directly to such GPIO pins. Your board-specific 189 setup logic must also provide a platform device, 190 with configuration data saying which GPIOs are used. 191 192 To compile this driver as a module, choose M here: the 193 module will be called gpio_keys. 194 195config KEYBOARD_MATRIX 196 tristate "GPIO driven matrix keypad support" 197 depends on GENERIC_GPIO 198 help 199 Enable support for GPIO driven matrix keypad. 200 201 To compile this driver as a module, choose M here: the 202 module will be called matrix_keypad. 203 204config KEYBOARD_HIL_OLD 205 tristate "HP HIL keyboard support (simple driver)" 206 depends on GSC || HP300 207 default y 208 help 209 The "Human Interface Loop" is a older, 8-channel USB-like 210 controller used in several Hewlett Packard models. This driver 211 was adapted from the one written for m68k/hp300, and implements 212 support for a keyboard attached to the HIL port, but not for 213 any other types of HIL input devices like mice or tablets. 214 However, it has been thoroughly tested and is stable. 215 216 If you want full HIL support including support for multiple 217 keyboards, mice, and tablets, you have to enable the 218 "HP System Device Controller i8042 Support" in the input/serio 219 submenu. 220 221config KEYBOARD_HIL 222 tristate "HP HIL keyboard/pointer support" 223 depends on GSC || HP300 224 default y 225 select HP_SDC 226 select HIL_MLC 227 select SERIO 228 help 229 The "Human Interface Loop" is a older, 8-channel USB-like 230 controller used in several Hewlett Packard models. 231 This driver implements support for HIL-keyboards and pointing 232 devices (mice, tablets, touchscreens) attached 233 to your machine, so normally you should say Y here. 234 235config KEYBOARD_HP6XX 236 tristate "HP Jornada 6xx keyboard" 237 depends on SH_HP6XX 238 select INPUT_POLLDEV 239 help 240 Say Y here if you have a HP Jornada 620/660/680/690 and want to 241 support the built-in keyboard. 242 243 To compile this driver as a module, choose M here: the 244 module will be called jornada680_kbd. 245 246config KEYBOARD_HP7XX 247 tristate "HP Jornada 7xx keyboard" 248 depends on SA1100_JORNADA720_SSP && SA1100_SSP 249 help 250 Say Y here if you have a HP Jornada 710/720/728 and want to 251 support the built-in keyboard. 252 253 To compile this driver as a module, choose M here: the 254 module will be called jornada720_kbd. 255 256config KEYBOARD_LM8323 257 tristate "LM8323 keypad chip" 258 depends on I2C 259 depends on LEDS_CLASS 260 help 261 If you say yes here you get support for the National Semiconductor 262 LM8323 keypad controller. 263 264 To compile this driver as a module, choose M here: the 265 module will be called lm8323. 266 267config KEYBOARD_LOCOMO 268 tristate "LoCoMo Keyboard Support" 269 depends on SHARP_LOCOMO 270 help 271 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA 272 273 To compile this driver as a module, choose M here: the 274 module will be called locomokbd. 275 276config KEYBOARD_MAPLE 277 tristate "Maple bus keyboard" 278 depends on SH_DREAMCAST && MAPLE 279 help 280 Say Y here if you have a Dreamcast console running Linux and have 281 a keyboard attached to its Maple bus. 282 283 To compile this driver as a module, choose M here: the 284 module will be called maple_keyb. 285 286config KEYBOARD_MAX7359 287 tristate "Maxim MAX7359 Key Switch Controller" 288 depends on I2C 289 help 290 If you say yes here you get support for the Maxim MAX7359 Key 291 Switch Controller chip. This providers microprocessors with 292 management of up to 64 key switches 293 294 To compile this driver as a module, choose M here: the 295 module will be called max7359_keypad. 296 297config KEYBOARD_IMX 298 tristate "IMX keypad support" 299 depends on ARCH_MXC 300 help 301 Enable support for IMX keypad port. 302 303 To compile this driver as a module, choose M here: the 304 module will be called imx_keypad. 305 306config KEYBOARD_NEWTON 307 tristate "Newton keyboard" 308 select SERIO 309 help 310 Say Y here if you have a Newton keyboard on a serial port. 311 312 To compile this driver as a module, choose M here: the 313 module will be called newtonkbd. 314 315config KEYBOARD_OPENCORES 316 tristate "OpenCores Keyboard Controller" 317 help 318 Say Y here if you want to use the OpenCores Keyboard Controller 319 http://www.opencores.org/project,keyboardcontroller 320 321 To compile this driver as a module, choose M here; the 322 module will be called opencores-kbd. 323 324config KEYBOARD_PXA27x 325 tristate "PXA27x/PXA3xx keypad support" 326 depends on PXA27x || PXA3xx 327 help 328 Enable support for PXA27x/PXA3xx keypad controller. 329 330 To compile this driver as a module, choose M here: the 331 module will be called pxa27x_keypad. 332 333config KEYBOARD_PXA930_ROTARY 334 tristate "PXA930/PXA935 Enhanced Rotary Controller Support" 335 depends on CPU_PXA930 || CPU_PXA935 336 help 337 Enable support for PXA930/PXA935 Enhanced Rotary Controller. 338 339 To compile this driver as a module, choose M here: the 340 module will be called pxa930_rotary. 341 342config KEYBOARD_SPITZ 343 tristate "Spitz keyboard (deprecated)" 344 depends on PXA_SHARPSL 345 help 346 Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000, 347 SL-C3000 and Sl-C3100 series of PDAs. 348 349 This driver is now deprecated, use generic GPIO based matrix 350 keyboard driver instead. 351 352 To compile this driver as a module, choose M here: the 353 module will be called spitzkbd. 354 355config KEYBOARD_STOWAWAY 356 tristate "Stowaway keyboard" 357 select SERIO 358 help 359 Say Y here if you have a Stowaway keyboard on a serial port. 360 Stowaway compatible keyboards like Dicota Input-PDA keyboard 361 are also supported by this driver. 362 363 To compile this driver as a module, choose M here: the 364 module will be called stowaway. 365 366config KEYBOARD_SUNKBD 367 tristate "Sun Type 4 and Type 5 keyboard" 368 select SERIO 369 help 370 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, 371 connected either to the Sun keyboard connector or to an serial 372 (RS-232) port via a simple adapter. 373 374 To compile this driver as a module, choose M here: the 375 module will be called sunkbd. 376 377config KEYBOARD_SH_KEYSC 378 tristate "SuperH KEYSC keypad support" 379 depends on SUPERH || ARCH_SHMOBILE 380 help 381 Say Y here if you want to use a keypad attached to the KEYSC block 382 on SuperH processors such as sh7722 and sh7343. 383 384 To compile this driver as a module, choose M here: the 385 module will be called sh_keysc. 386 387config KEYBOARD_DAVINCI 388 tristate "TI DaVinci Key Scan" 389 depends on ARCH_DAVINCI_DM365 390 help 391 Say Y to enable keypad module support for the TI DaVinci 392 platforms (DM365). 393 394 To compile this driver as a module, choose M here: the 395 module will be called davinci_keyscan. 396 397config KEYBOARD_OMAP 398 tristate "TI OMAP keypad support" 399 depends on (ARCH_OMAP1 || ARCH_OMAP2) 400 help 401 Say Y here if you want to use the OMAP keypad. 402 403 To compile this driver as a module, choose M here: the 404 module will be called omap-keypad. 405 406config KEYBOARD_TWL4030 407 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" 408 depends on TWL4030_CORE 409 help 410 Say Y here if your board use the keypad controller on 411 TWL4030 family chips. It's safe to say enable this 412 even on boards that don't use the keypad controller. 413 414 To compile this driver as a module, choose M here: the 415 module will be called twl4030_keypad. 416 417config KEYBOARD_TOSA 418 tristate "Tosa keyboard (deprecated)" 419 depends on MACH_TOSA 420 help 421 Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa) 422 423 This driver is now deprecated, use generic GPIO based matrix 424 keyboard driver instead. 425 426 To compile this driver as a module, choose M here: the 427 module will be called tosakbd. 428 429config KEYBOARD_TOSA_USE_EXT_KEYCODES 430 bool "Tosa keyboard: use extended keycodes" 431 depends on KEYBOARD_TOSA 432 help 433 Say Y here to enable the tosa keyboard driver to generate extended 434 (>= 127) keycodes. Be aware, that they can't be correctly interpreted 435 by either console keyboard driver or by Kdrive keybd driver. 436 437 Say Y only if you know, what you are doing! 438 439config KEYBOARD_XTKBD 440 tristate "XT keyboard" 441 select SERIO 442 help 443 Say Y here if you want to use the old IBM PC/XT keyboard (or 444 compatible) on your system. This is only possible with a 445 parallel port keyboard adapter, you cannot connect it to the 446 keyboard port on a PC that runs Linux. 447 448 To compile this driver as a module, choose M here: the 449 module will be called xtkbd. 450 451config KEYBOARD_W90P910 452 tristate "W90P910 Matrix Keypad support" 453 depends on ARCH_W90X900 454 help 455 Say Y here to enable the matrix keypad on evaluation board 456 based on W90P910. 457 458 To compile this driver as a module, choose M here: the 459 module will be called w90p910_keypad. 460 461endif 462