linux/include/pcmcia/ss.h
<<
>>
Prefs
   1/*
   2 * ss.h
   3 *
   4 * This program is free software; you can redistribute it and/or modify
   5 * it under the terms of the GNU General Public License version 2 as
   6 * published by the Free Software Foundation.
   7 *
   8 * The initial developer of the original code is David A. Hinds
   9 * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
  10 * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
  11 *
  12 * (C) 1999             David A. Hinds
  13 */
  14
  15#ifndef _LINUX_SS_H
  16#define _LINUX_SS_H
  17
  18#include <linux/device.h>
  19#include <linux/sched.h>        /* task_struct, completion */
  20#include <linux/mutex.h>
  21
  22#include <pcmcia/cs_types.h>
  23#include <pcmcia/cs.h>
  24#ifdef CONFIG_CARDBUS
  25#include <linux/pci.h>
  26#endif
  27
  28/* Definitions for card status flags for GetStatus */
  29#define SS_WRPROT       0x0001
  30#define SS_CARDLOCK     0x0002
  31#define SS_EJECTION     0x0004
  32#define SS_INSERTION    0x0008
  33#define SS_BATDEAD      0x0010
  34#define SS_BATWARN      0x0020
  35#define SS_READY        0x0040
  36#define SS_DETECT       0x0080
  37#define SS_POWERON      0x0100
  38#define SS_GPI          0x0200
  39#define SS_STSCHG       0x0400
  40#define SS_CARDBUS      0x0800
  41#define SS_3VCARD       0x1000
  42#define SS_XVCARD       0x2000
  43#define SS_PENDING      0x4000
  44#define SS_ZVCARD       0x8000
  45
  46/* InquireSocket capabilities */
  47#define SS_CAP_PAGE_REGS        0x0001
  48#define SS_CAP_VIRTUAL_BUS      0x0002
  49#define SS_CAP_MEM_ALIGN        0x0004
  50#define SS_CAP_STATIC_MAP       0x0008
  51#define SS_CAP_PCCARD           0x4000
  52#define SS_CAP_CARDBUS          0x8000
  53
  54/* for GetSocket, SetSocket */
  55typedef struct socket_state_t {
  56        u_int   flags;
  57        u_int   csc_mask;
  58        u_char  Vcc, Vpp;
  59        u_char  io_irq;
  60} socket_state_t;
  61
  62extern socket_state_t dead_socket;
  63
  64/* Socket configuration flags */
  65#define SS_PWR_AUTO     0x0010
  66#define SS_IOCARD       0x0020
  67#define SS_RESET        0x0040
  68#define SS_DMA_MODE     0x0080
  69#define SS_SPKR_ENA     0x0100
  70#define SS_OUTPUT_ENA   0x0200
  71
  72/* Flags for I/O port and memory windows */
  73#define MAP_ACTIVE      0x01
  74#define MAP_16BIT       0x02
  75#define MAP_AUTOSZ      0x04
  76#define MAP_0WS         0x08
  77#define MAP_WRPROT      0x10
  78#define MAP_ATTRIB      0x20
  79#define MAP_USE_WAIT    0x40
  80#define MAP_PREFETCH    0x80
  81
  82/* Use this just for bridge windows */
  83#define MAP_IOSPACE     0x20
  84
  85/* power hook operations */
  86#define HOOK_POWER_PRE  0x01
  87#define HOOK_POWER_POST 0x02
  88
  89typedef struct pccard_io_map {
  90        u_char  map;
  91        u_char  flags;
  92        u_short speed;
  93        phys_addr_t start, stop;
  94} pccard_io_map;
  95
  96typedef struct pccard_mem_map {
  97        u_char          map;
  98        u_char          flags;
  99        u_short         speed;
 100        phys_addr_t     static_start;
 101        u_int           card_start;
 102        struct resource *res;
 103} pccard_mem_map;
 104
 105typedef struct io_window_t {
 106        u_int                   InUse, Config;
 107        struct resource         *res;
 108} io_window_t;
 109
 110/* Maximum number of IO windows per socket */
 111#define MAX_IO_WIN 2
 112
 113/* Maximum number of memory windows per socket */
 114#define MAX_WIN 4
 115
 116
 117/*
 118 * Socket operations.
 119 */
 120struct pcmcia_socket;
 121struct pccard_resource_ops;
 122struct config_t;
 123struct pcmcia_callback;
 124struct user_info_t;
 125
 126struct pccard_operations {
 127        int (*init)(struct pcmcia_socket *s);
 128        int (*suspend)(struct pcmcia_socket *s);
 129        int (*get_status)(struct pcmcia_socket *s, u_int *value);
 130        int (*set_socket)(struct pcmcia_socket *s, socket_state_t *state);
 131        int (*set_io_map)(struct pcmcia_socket *s, struct pccard_io_map *io);
 132        int (*set_mem_map)(struct pcmcia_socket *s, struct pccard_mem_map *mem);
 133};
 134
 135struct pcmcia_socket {
 136        struct module                   *owner;
 137        socket_state_t                  socket;
 138        u_int                           state;
 139        u_int                           suspended_state;        /* state before suspend */
 140        u_short                         functions;
 141        u_short                         lock_count;
 142        pccard_mem_map                  cis_mem;
 143        void __iomem                    *cis_virt;
 144        struct {
 145                u_int                   AssignedIRQ;
 146                u_int                   Config;
 147        } irq;
 148        io_window_t                     io[MAX_IO_WIN];
 149        pccard_mem_map                  win[MAX_WIN];
 150        struct list_head                cis_cache;
 151        size_t                          fake_cis_len;
 152        u8                              *fake_cis;
 153
 154        struct list_head                socket_list;
 155        struct completion               socket_released;
 156
 157        /* deprecated */
 158        unsigned int                    sock;           /* socket number */
 159
 160
 161        /* socket capabilities */
 162        u_int                           features;
 163        u_int                           irq_mask;
 164        u_int                           map_size;
 165        u_int                           io_offset;
 166        u_int                           pci_irq;
 167        struct pci_dev                  *cb_dev;
 168
 169
 170        /* socket setup is done so resources should be able to be allocated.
 171         * Only if set to 1, calls to find_{io,mem}_region are handled, and
 172         * insertio events are actually managed by the PCMCIA layer.*/
 173        u8                              resource_setup_done:1;
 174
 175        /* It's old if resource setup is done using adjust_resource_info() */
 176        u8                              resource_setup_old:1;
 177        u8                              resource_setup_new:1;
 178
 179        u8                              reserved:5;
 180
 181        /* socket operations */
 182        struct pccard_operations        *ops;
 183        struct pccard_resource_ops      *resource_ops;
 184        void                            *resource_data;
 185
 186        /* Zoom video behaviour is so chip specific its not worth adding
 187           this to _ops */
 188        void                            (*zoom_video)(struct pcmcia_socket *,
 189                                                      int);
 190
 191        /* so is power hook */
 192        int (*power_hook)(struct pcmcia_socket *sock, int operation);
 193
 194        /* allows tuning the CB bridge before loading driver for the CB card */
 195#ifdef CONFIG_CARDBUS
 196        void (*tune_bridge)(struct pcmcia_socket *sock, struct pci_bus *bus);
 197#endif
 198
 199        /* state thread */
 200        struct task_struct              *thread;
 201        struct completion               thread_done;
 202        unsigned int                    thread_events;
 203        unsigned int                    sysfs_events;
 204
 205        /* For the non-trivial interaction between these locks,
 206         * see Documentation/pcmcia/locking.txt */
 207        struct mutex                    skt_mutex;
 208        struct mutex                    ops_mutex;
 209
 210        /* protects thread_events and sysfs_events */
 211        spinlock_t                      thread_lock;
 212
 213        /* pcmcia (16-bit) */
 214        struct pcmcia_callback          *callback;
 215
 216#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
 217        /* The following elements refer to 16-bit PCMCIA devices inserted
 218         * into the socket */
 219        struct list_head                devices_list;
 220
 221        /* the number of devices, used only internally and subject to
 222         * incorrectness and change */
 223        u8                              device_count;
 224
 225        /* 16-bit state: */
 226        struct {
 227                /* "master" ioctl is used */
 228                u8                      busy:1;
 229                /* the PCMCIA card consists of two pseudo devices */
 230                u8                      has_pfc:1;
 231
 232                u8                      reserved:6;
 233        } pcmcia_state;
 234
 235        /* non-zero if PCMCIA card is present */
 236        atomic_t                        present;
 237
 238#ifdef CONFIG_PCMCIA_IOCTL
 239        struct user_info_t              *user;
 240        wait_queue_head_t               queue;
 241#endif /* CONFIG_PCMCIA_IOCTL */
 242#endif /* CONFIG_PCMCIA */
 243
 244        /* socket device */
 245        struct device                   dev;
 246        /* data internal to the socket driver */
 247        void                            *driver_data;
 248        /* status of the card during resume from a system sleep state */
 249        int                             resume_status;
 250};
 251
 252
 253/* socket drivers must define the resource operations type they use. There
 254 * are three options:
 255 * - pccard_static_ops          iomem and ioport areas are assigned statically
 256 * - pccard_iodyn_ops           iomem areas is assigned statically, ioport
 257 *                              areas dynamically
 258 *                              If this option is selected, use
 259 *                              "select PCCARD_IODYN" in Kconfig.
 260 * - pccard_nonstatic_ops       iomem and ioport areas are assigned dynamically.
 261 *                              If this option is selected, use
 262 *                              "select PCCARD_NONSTATIC" in Kconfig.
 263 *
 264 */
 265extern struct pccard_resource_ops pccard_static_ops;
 266#if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
 267extern struct pccard_resource_ops pccard_iodyn_ops;
 268extern struct pccard_resource_ops pccard_nonstatic_ops;
 269#else
 270/* If PCMCIA is not used, but only CARDBUS, these functions are not used
 271 * at all. Therefore, do not use the large (240K!) rsrc_nonstatic module
 272 */
 273#define pccard_iodyn_ops pccard_static_ops
 274#define pccard_nonstatic_ops pccard_static_ops
 275#endif
 276
 277
 278/* socket drivers use this callback in their IRQ handler */
 279extern void pcmcia_parse_events(struct pcmcia_socket *socket,
 280                                unsigned int events);
 281
 282/* to register and unregister a socket */
 283extern int pcmcia_register_socket(struct pcmcia_socket *socket);
 284extern void pcmcia_unregister_socket(struct pcmcia_socket *socket);
 285
 286
 287#endif /* _LINUX_SS_H */
 288
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.