/*
 *  linux/drivers/video/amba-clcd.c
 *
 * Copyright (C) 2001 ARM Limited, by David A Rusling
 * Updated to 2.5, Deep Blue Solutions Ltd.
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file COPYING in the main directory of this archive
 * for more details.
 *
 *  ARM PrimeCell PL110 Color LCD Controller
 */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/clk.h>
#include <linux/hardirq.h>

#include <asm/sizes.h>

#define to_clcd(info)   container_of(info, struct clcd_fb, fb)

/* This is limited to 16 characters when displayed by X startup */
static const char *clcd_name = "CLCD FB";

/*
 * Unfortunately, the enable/disable functions may be called either from
 * process or IRQ context, and we _need_ to delay.  This is _not_ good.
 */
static inline void clcdfb_sleep(unsigned int ms)
{
        if (in_atomic()) {
                mdelay(ms);
        } else {
                msleep(ms);
        }
}

static inline void clcdfb_set_start(struct clcd_fb *fb)
{
        unsigned long ustart = fb->fb.fix.smem_start;
        unsigned long lstart;

        ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
        lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;

        writel(ustart, fb->regs + CLCD_UBAS);
        writel(lstart, fb->regs + CLCD_LBAS);
}

static void clcdfb_disable(struct clcd_fb *fb)
{
        u32 val;

        if (fb->board->disable)
                fb->board->disable(fb);

        val = readl(fb->regs + fb->off_cntl);
        if (val & CNTL_LCDPWR) {
                val &= ~CNTL_LCDPWR;
                writel(val, fb->regs + fb->off_cntl);

                clcdfb_sleep(20);
        }
        if (val & CNTL_LCDEN) {
                val &= ~CNTL_LCDEN;
                writel(val, fb->regs + fb->off_cntl);
        }

        /*
         * Disable CLCD clock source.
         */
        clk_disable(fb->clk);
}

static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
{
        /*
         * Enable the CLCD clock source.
         */
        clk_enable(fb->clk);

        /*
         * Bring up by first enabling..
         */
        cntl |= CNTL_LCDEN;
        writel(cntl, fb->regs + fb->off_cntl);

        clcdfb_sleep(20);

        /*
         * and now apply power.
         */
        cntl |= CNTL_LCDPWR;
        writel(cntl, fb->regs + fb->off_cntl);

        /*
         * finally, enable the interface.
         */
        if (fb->board->enable)
                fb->board->enable(fb);
}

static int
clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
        int ret = 0;

        memset(&var->transp, 0, sizeof(var->transp));

        var->red.msb_right = 0;
        var->green.msb_right = 0;
        var->blue.msb_right = 0;

        switch (var->bits_per_pixel) {
        case 1:
        case 2:
        case 4:
        case 8:
                var->red.length         = var->bits_per_pixel;
                var->red.offset         = 0;
                var->green.length       = var->bits_per_pixel;
                var->green.offset       = 0;
                var->blue.length        = var->bits_per_pixel;
                var->blue.offset        = 0;
                break;
        case 16:
                var->red.length = 5;
                var->blue.length = 5;
                /*
                 * Green length can be 5 or 6 depending whether
                 * we're operating in RGB555 or RGB565 mode.
                 */
                if (var->green.length != 5 && var->green.length != 6)
                        var->green.length = 6;
                break;
        case 32:
                if (fb->panel->cntl & CNTL_LCDTFT) {
                        var->red.length         = 8;
                        var->green.length       = 8;
                        var->blue.length        = 8;
                        break;
                }
        default:
                ret = -EINVAL;
                break;
        }

        /*
         * >= 16bpp displays have separate colour component bitfields
         * encoded in the pixel data.  Calculate their position from
         * the bitfield length defined above.
         */
        if (ret == 0 && var->bits_per_pixel >= 16) {
                if (fb->panel->cntl & CNTL_BGR) {
                        var->blue.offset = 0;
                        var->green.offset = var->blue.offset + var->blue.length;
                        var->red.offset = var->green.offset + var->green.length;
                } else {
                        var->red.offset = 0;
                        var->green.offset = var->red.offset + var->red.length;
                        var->blue.offset = var->green.offset + var->green.length;
                }
        }

        return ret;
}

static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
        struct clcd_fb *fb = to_clcd(info);
        int ret = -EINVAL;

        if (fb->board->check)
                ret = fb->board->check(fb, var);

        if (ret == 0 &&
            var->xres_virtual * var->bits_per_pixel / 8 *
            var->yres_virtual > fb->fb.fix.smem_len)
                ret = -EINVAL;

        if (ret == 0)
                ret = clcdfb_set_bitfields(fb, var);

        return ret;
}

static int clcdfb_set_par(struct fb_info *info)
{
        struct clcd_fb *fb = to_clcd(info);
        struct clcd_regs regs;

        fb->fb.fix.line_length = fb->fb.var.xres_virtual *
                                 fb->fb.var.bits_per_pixel / 8;

        if (fb->fb.var.bits_per_pixel <= 8)
                fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
        else
                fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;

        fb->board->decode(fb, &regs);

        clcdfb_disable(fb);

        writel(regs.tim0, fb->regs + CLCD_TIM0);
        writel(regs.tim1, fb->regs + CLCD_TIM1);
        writel(regs.tim2, fb->regs + CLCD_TIM2);
        writel(regs.tim3, fb->regs + CLCD_TIM3);

        clcdfb_set_start(fb);

        clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);

        fb->clcd_cntl = regs.cntl;

        clcdfb_enable(fb, regs.cntl);

#ifdef DEBUG
        printk(KERN_INFO
               "CLCD: Registers set to\n"
               "  %08x %08x %08x %08x\n"
               "  %08x %08x %08x %08x\n",
                readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
                readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
                readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
                readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
#endif

        return 0;
}

static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
{
        unsigned int mask = (1 << bf->length) - 1;

        return (val >> (16 - bf->length) & mask) << bf->offset;
}

/*
 *  Set a single color register. The values supplied have a 16 bit
 *  magnitude.  Return != 0 for invalid regno.
 */
static int
clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
                 unsigned int blue, unsigned int transp, struct fb_info *info)
{
        struct clcd_fb *fb = to_clcd(info);

        if (regno < 16)
                fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
                                  convert_bitfield(blue, &fb->fb.var.blue) |
                                  convert_bitfield(green, &fb->fb.var.green) |
                                  convert_bitfield(red, &fb->fb.var.red);

        if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
                int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
                u32 val, mask, newval;

                newval  = (red >> 11)  & 0x001f;
                newval |= (green >> 6) & 0x03e0;
                newval |= (blue >> 1)  & 0x7c00;

                /*
                 * 3.2.11: if we're configured for big endian
                 * byte order, the palette entries are swapped.
                 */
                if (fb->clcd_cntl & CNTL_BEBO)
                        regno ^= 1;

                if (regno & 1) {
                        newval <<= 16;
                        mask = 0x0000ffff;
                } else {
                        mask = 0xffff0000;
                }

                val = readl(fb->regs + hw_reg) & mask;
                writel(val | newval, fb->regs + hw_reg);
        }

        return regno > 255;
}

/*
 *  Blank the screen if blank_mode != 0, else unblank. If blank == NULL
 *  then the caller blanks by setting the CLUT (Color Look Up Table) to all
 *  black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
 *  to e.g. a video mode which doesn't support it. Implements VESA suspend
 *  and powerdown modes on hardware that supports disabling hsync/vsync:
 *    blank_mode == 2: suspend vsync
 *    blank_mode == 3: suspend hsync
 *    blank_mode == 4: powerdown
 */
static int clcdfb_blank(int blank_mode, struct fb_info *info)
{
        struct clcd_fb *fb = to_clcd(info);

        if (blank_mode != 0) {
                clcdfb_disable(fb);
        } else {
                clcdfb_enable(fb, fb->clcd_cntl);
        }
        return 0;
}

static int clcdfb_mmap(struct fb_info *info,
                       struct vm_area_struct *vma)
{
        struct clcd_fb *fb = to_clcd(info);
        unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
        int ret = -EINVAL;

        len = info->fix.smem_len;

        if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
            fb->board->mmap)
                ret = fb->board->mmap(fb, vma);

        return ret;
}

static struct fb_ops clcdfb_ops = {
        .owner          = THIS_MODULE,
        .fb_check_var   = clcdfb_check_var,
        .fb_set_par     = clcdfb_set_par,
        .fb_setcolreg   = clcdfb_setcolreg,
        .fb_blank       = clcdfb_blank,
        .fb_fillrect    = cfb_fillrect,
        .fb_copyarea    = cfb_copyarea,
        .fb_imageblit   = cfb_imageblit,
        .fb_mmap        = clcdfb_mmap,
};

static int clcdfb_register(struct clcd_fb *fb)
{
        int ret;

        /*
         * ARM PL111 always has IENB at 0x1c; it's only PL110
         * which is reversed on some platforms.
         */
        if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
                fb->off_ienb = CLCD_PL111_IENB;
                fb->off_cntl = CLCD_PL111_CNTL;
        } else {
#ifdef CONFIG_ARCH_VERSATILE
                fb->off_ienb = CLCD_PL111_IENB;
                fb->off_cntl = CLCD_PL111_CNTL;
#else
                fb->off_ienb = CLCD_PL110_IENB;
                fb->off_cntl = CLCD_PL110_CNTL;
#endif
        }

        fb->clk = clk_get(&fb->dev->dev, NULL);
        if (IS_ERR(fb->clk)) {
                ret = PTR_ERR(fb->clk);
                goto out;
        }

        fb->fb.fix.mmio_start   = fb->dev->res.start;
        fb->fb.fix.mmio_len     = resource_size(&fb->dev->res);

        fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
        if (!fb->regs) {
                printk(KERN_ERR "CLCD: unable to remap registers\n");
                ret = -ENOMEM;
                goto free_clk;
        }

        fb->fb.fbops            = &clcdfb_ops;
        fb->fb.flags            = FBINFO_FLAG_DEFAULT;
        fb->fb.pseudo_palette   = fb->cmap;

        strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
        fb->fb.fix.type         = FB_TYPE_PACKED_PIXELS;
        fb->fb.fix.type_aux     = 0;
        fb->fb.fix.xpanstep     = 0;
        fb->fb.fix.ypanstep     = 0;
        fb->fb.fix.ywrapstep    = 0;
        fb->fb.fix.accel        = FB_ACCEL_NONE;

        fb->fb.var.xres         = fb->panel->mode.xres;
        fb->fb.var.yres         = fb->panel->mode.yres;
        fb->fb.var.xres_virtual = fb->panel->mode.xres;
        fb->fb.var.yres_virtual = fb->panel->mode.yres;
        fb->fb.var.bits_per_pixel = fb->panel->bpp;
        fb->fb.var.grayscale    = fb->panel->grayscale;
        fb->fb.var.pixclock     = fb->panel->mode.pixclock;
        fb->fb.var.left_margin  = fb->panel->mode.left_margin;
        fb->fb.var.right_margin = fb->panel->mode.right_margin;
        fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
        fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
        fb->fb.var.hsync_len    = fb->panel->mode.hsync_len;
        fb->fb.var.vsync_len    = fb->panel->mode.vsync_len;
        fb->fb.var.sync         = fb->panel->mode.sync;
        fb->fb.var.vmode        = fb->panel->mode.vmode;
        fb->fb.var.activate     = FB_ACTIVATE_NOW;
        fb->fb.var.nonstd       = 0;
        fb->fb.var.height       = fb->panel->height;
        fb->fb.var.width        = fb->panel->width;
        fb->fb.var.accel_flags  = 0;

        fb->fb.monspecs.hfmin   = 0;
        fb->fb.monspecs.hfmax   = 100000;
        fb->fb.monspecs.vfmin   = 0;
        fb->fb.monspecs.vfmax   = 400;
        fb->fb.monspecs.dclkmin = 1000000;
        fb->fb.monspecs.dclkmax = 100000000;

        /*
         * Make sure that the bitfields are set appropriately.
         */
        clcdfb_set_bitfields(fb, &fb->fb.var);

        /*
         * Allocate colourmap.
         */
        ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
        if (ret)
                goto unmap;

        /*
         * Ensure interrupts are disabled.
         */
        writel(0, fb->regs + fb->off_ienb);

        fb_set_var(&fb->fb, &fb->fb.var);

        printk(KERN_INFO "CLCD: %s hardware, %s display\n",
               fb->board->name, fb->panel->mode.name);

        ret = register_framebuffer(&fb->fb);
        if (ret == 0)
                goto out;

        printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);

        fb_dealloc_cmap(&fb->fb.cmap);
 unmap:
        iounmap(fb->regs);
 free_clk:
        clk_put(fb->clk);
 out:
        return ret;
}

static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
{
        struct clcd_board *board = dev->dev.platform_data;
        struct clcd_fb *fb;
        int ret;

        if (!board)
                return -EINVAL;

        ret = amba_request_regions(dev, NULL);
        if (ret) {
                printk(KERN_ERR "CLCD: unable to reserve regs region\n");
                goto out;
        }

        fb = kzalloc(sizeof(struct clcd_fb), GFP_KERNEL);
        if (!fb) {
                printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
                ret = -ENOMEM;
                goto free_region;
        }

        fb->dev = dev;
        fb->board = board;

        ret = fb->board->setup(fb);
        if (ret)
                goto free_fb;

        ret = clcdfb_register(fb); 
        if (ret == 0) {
                amba_set_drvdata(dev, fb);
                goto out;
        }

        fb->board->remove(fb);
 free_fb:
        kfree(fb);
 free_region:
        amba_release_regions(dev);
 out:
        return ret;
}

static int clcdfb_remove(struct amba_device *dev)
{
        struct clcd_fb *fb = amba_get_drvdata(dev);

        amba_set_drvdata(dev, NULL);

        clcdfb_disable(fb);
        unregister_framebuffer(&fb->fb);
        if (fb->fb.cmap.len)
                fb_dealloc_cmap(&fb->fb.cmap);
        iounmap(fb->regs);
        clk_put(fb->clk);

        fb->board->remove(fb);

        kfree(fb);

        amba_release_regions(dev);

        return 0;
}

static struct amba_id clcdfb_id_table[] = {
        {
                .id     = 0x00041110,
                .mask   = 0x000ffffe,
        },
        { 0, 0 },
};

static struct amba_driver clcd_driver = {
        .drv            = {
                .name   = "clcd-pl11x",
        },
        .probe          = clcdfb_probe,
        .remove         = clcdfb_remove,
        .id_table       = clcdfb_id_table,
};

static int __init amba_clcdfb_init(void)
{
        if (fb_get_options("ambafb", NULL))
                return -ENODEV;

        return amba_driver_register(&clcd_driver);
}

module_init(amba_clcdfb_init);

static void __exit amba_clcdfb_exit(void)
{
        amba_driver_unregister(&clcd_driver);
}

module_exit(amba_clcdfb_exit);

MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
MODULE_LICENSE("GPL");