LXR linux/drivers/pcmcia/Kconfig

   1#
   2# PCCARD (PCMCIA/CardBus) bus subsystem configuration
   3#
   4
   5menuconfig PCCARD
   6        tristate "PCCard (PCMCIA/CardBus) support"
   7        depends on HOTPLUG
   8        ---help---
   9          Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  10          computer.  These are credit-card size devices such as network cards,
  11          modems or hard drives often used with laptops computers.  There are
  12          actually two varieties of these cards: 16 bit PCMCIA and 32 bit
  13          CardBus cards.
  14
  15          To compile this driver as modules, choose M here: the
  16          module will be called pcmcia_core.
  17
  18if PCCARD
  19
  20config PCMCIA
  21        tristate "16-bit PCMCIA support"
  22        select CRC32
  23        default y
  24        ---help---
  25           This option enables support for 16-bit PCMCIA cards. Most older
  26           PC-cards are such 16-bit PCMCIA cards, so unless you know you're
  27           only using 32-bit CardBus cards, say Y or M here.
  28
  29           To use 16-bit PCMCIA cards, you will need supporting software in
  30           most cases. (see the file <file:Documentation/Changes> for
  31           location and details).
  32
  33           To compile this driver as modules, choose M here: the
  34           module will be called pcmcia.
  35
  36           If unsure, say Y.
  37
  38config PCMCIA_LOAD_CIS
  39        bool "Load CIS updates from userspace (EXPERIMENTAL)"
  40        depends on PCMCIA && EXPERIMENTAL
  41        select FW_LOADER
  42        default y
  43        help
  44          Some PCMCIA cards require an updated Card Information Structure (CIS)
  45          to be loaded from userspace to work correctly. If you say Y here,
  46          and your userspace is arranged correctly, this will be loaded
  47          automatically using the in-kernel firmware loader and the hotplug
  48          subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
  49
  50          If unsure, say Y.
  51
  52config PCMCIA_IOCTL
  53        bool "PCMCIA control ioctl (obsolete)"
  54        depends on PCMCIA && ARM && !SMP && !PREEMPT
  55        default y
  56        help
  57          If you say Y here, the deprecated ioctl interface to the PCMCIA
  58          subsystem will be built. It is needed by the deprecated pcmcia-cs
  59          tools (cardmgr, cardctl) to function properly.
  60
  61          You should use the new pcmciautils package instead (see
  62          <file:Documentation/Changes> for location and details).
  63
  64          This config option will most likely be removed from kernel 2.6.35,
  65          the associated code from kernel 2.6.36.
  66
  67          As the PCMCIA ioctl is not locking safe, it depends on !SMP and
  68          !PREEMPT.
  69
  70          If unsure, say N.
  71
  72config CARDBUS
  73        bool "32-bit CardBus support"
  74        depends on PCI
  75        default y
  76        ---help---
  77          CardBus is a bus mastering architecture for PC-cards, which allows
  78          for 32 bit PC-cards (the original PCMCIA standard specifies only
  79          a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
  80
  81          To use 32 bit PC-cards, you also need a CardBus compatible host
  82          bridge. Virtually all modern PCMCIA bridges do this, and most of
  83          them are "yenta-compatible", so say Y or M there, too.
  84
  85          If unsure, say Y.
  86
  87comment "PC-card bridges"
  88
  89config YENTA
  90        tristate "CardBus yenta-compatible bridge support"
  91        depends on PCI
  92        select CARDBUS if !EMBEDDED
  93        select PCCARD_NONSTATIC if PCMCIA != n
  94        ---help---
  95          This option enables support for CardBus host bridges.  Virtually
  96          all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
  97          the hardware inside your computer that PCMCIA cards are plugged
  98          into.
  99
 100          To compile this driver as modules, choose M here: the
 101          module will be called yenta_socket.
 102
 103          If unsure, say Y.
 104
 105config YENTA_O2
 106        default y
 107        bool "Special initialization for O2Micro bridges" if EMBEDDED
 108        depends on YENTA
 109
 110config YENTA_RICOH
 111        default y
 112        bool "Special initialization for Ricoh bridges" if EMBEDDED
 113        depends on YENTA
 114
 115config YENTA_TI
 116        default y
 117        bool "Special initialization for TI and EnE bridges" if EMBEDDED
 118        depends on YENTA
 119
 120config YENTA_ENE_TUNE
 121        default y
 122        bool "Auto-tune EnE bridges for CB cards" if EMBEDDED
 123        depends on YENTA_TI && CARDBUS
 124
 125config YENTA_TOSHIBA
 126        default y
 127        bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED
 128        depends on YENTA
 129
 130config PD6729
 131        tristate "Cirrus PD6729 compatible bridge support"
 132        depends on PCMCIA && PCI
 133        select PCCARD_NONSTATIC
 134        help
 135          This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 136          device, found in some older laptops and PCMCIA card readers.
 137
 138config I82092
 139        tristate "i82092 compatible bridge support"
 140        depends on PCMCIA && PCI
 141        select PCCARD_NONSTATIC
 142        help
 143          This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 144          found in some older laptops and more commonly in evaluation boards for the
 145          chip.
 146
 147config I82365
 148        tristate "i82365 compatible bridge support"
 149        depends on PCMCIA && ISA
 150        select PCCARD_NONSTATIC
 151        help
 152          Say Y here to include support for ISA-bus PCMCIA host bridges that
 153          are register compatible with the Intel i82365.  These are found on
 154          older laptops and ISA-bus card readers for desktop systems.  A
 155          "bridge" is the hardware inside your computer that PCMCIA cards are
 156          plugged into. If unsure, say N.
 157
 158config TCIC
 159        tristate "Databook TCIC host bridge support"
 160        depends on PCMCIA && ISA
 161        select PCCARD_NONSTATIC
 162        help
 163          Say Y here to include support for the Databook TCIC family of PCMCIA
 164          host bridges. These are only found on a handful of old systems.
 165          "Bridge" is the name used for the hardware inside your computer that
 166          PCMCIA cards are plugged into. If unsure, say N.
 167
 168config PCMCIA_M8XX
 169        tristate "MPC8xx PCMCIA support"
 170        depends on PCCARD && PPC && 8xx
 171        select PCCARD_IODYN if PCMCIA != n
 172        help
 173          Say Y here to include support for PowerPC 8xx series PCMCIA
 174          controller.
 175
 176          This driver is also available as a module called m8xx_pcmcia.
 177
 178config PCMCIA_AU1X00
 179        tristate "Au1x00 pcmcia support"
 180        depends on SOC_AU1X00 && PCMCIA
 181
 182config PCMCIA_ALCHEMY_DEVBOARD
 183        tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 184        depends on SOC_AU1X00 && PCMCIA
 185        select 64BIT_PHYS_ADDR
 186        help
 187          Enable this driver of you want PCMCIA support on your Alchemy
 188          Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
 189          NOT suitable for the PB1000!
 190
 191          This driver is also available as a module called db1xxx_ss.ko
 192
 193config PCMCIA_XXS1500
 194        tristate "MyCable XXS1500 PCMCIA socket support"
 195        depends on PCMCIA && MIPS_XXS1500
 196        select 64BIT_PHYS_ADDR
 197        help
 198          Support for the PCMCIA/CF socket interface on MyCable XXS1500
 199          systems.
 200
 201          This driver is also available as a module called xxs1500_ss.ko
 202
 203config PCMCIA_BCM63XX
 204        tristate "bcm63xx pcmcia support"
 205        depends on BCM63XX && PCMCIA
 206
 207config PCMCIA_SOC_COMMON
 208        tristate
 209
 210config PCMCIA_SA1100
 211        tristate "SA1100 support"
 212        depends on ARM && ARCH_SA1100 && PCMCIA
 213        select PCMCIA_SOC_COMMON
 214        help
 215          Say Y here to include support for SA11x0-based PCMCIA or CF
 216          sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 217          Xscale(R) embedded machines.
 218
 219          This driver is also available as a module called sa1100_cs.
 220
 221config PCMCIA_SA1111
 222        tristate "SA1111 support"
 223        depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
 224        select PCMCIA_SOC_COMMON
 225        help
 226          Say Y  here to include support for SA1111-based PCMCIA or CF
 227          sockets, found on the Jornada 720, Graphicsmaster and other
 228          StrongARM(R)/Xscale(R) embedded machines.
 229
 230          This driver is also available as a module called sa1111_cs.
 231
 232config PCMCIA_PXA2XX
 233        tristate "PXA2xx support"
 234        depends on ARM && ARCH_PXA && PCMCIA
 235        depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 236                    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 237                    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2)
 238        select PCMCIA_SOC_COMMON
 239        help
 240          Say Y here to include support for the PXA2xx PCMCIA controller
 241
 242config PCMCIA_DEBUG
 243        bool "Enable debugging"
 244        depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
 245        help
 246          Say Y here to enable debugging for the SoC PCMCIA layer.
 247          You will need to choose the debugging level either via the
 248          kernel command line, or module options depending whether
 249          you build the drivers as modules.
 250
 251          The kernel command line options are:
 252            sa11xx_core.pc_debug=N
 253            pxa2xx_core.pc_debug=N
 254
 255          The module option is called pc_debug=N
 256
 257          In all the above examples, N is the debugging verbosity
 258          level.
 259
 260config PCMCIA_PROBE
 261        bool
 262        default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
 263
 264config M32R_PCC
 265        bool "M32R PCMCIA I/F"
 266        depends on M32R && CHIP_M32700 && PCMCIA
 267        help
 268          Say Y here to use the M32R PCMCIA controller.
 269
 270config M32R_CFC
 271        bool "M32R CF I/F Controller"
 272        depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
 273        help
 274          Say Y here to use the M32R CompactFlash controller.
 275
 276config M32R_CFC_NUM
 277        int "M32R CF I/F number"
 278        depends on M32R_CFC
 279        default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
 280        help
 281          Set the number of M32R CF slots.
 282
 283config PCMCIA_VRC4171
 284        tristate "NEC VRC4171 Card Controllers support"
 285        depends on CPU_VR41XX && ISA && PCMCIA
 286
 287config PCMCIA_VRC4173
 288        tristate "NEC VRC4173 CARDU support"
 289        depends on CPU_VR41XX && PCI && PCMCIA
 290
 291config OMAP_CF
 292        tristate "OMAP CompactFlash Controller"
 293        depends on PCMCIA && ARCH_OMAP16XX
 294        help
 295          Say Y here to support the CompactFlash controller on OMAP.
 296          Note that this doesn't support "True IDE" mode.
 297
 298config BFIN_CFPCMCIA
 299        tristate "Blackfin CompactFlash PCMCIA Driver"
 300        depends on PCMCIA && BLACKFIN
 301        help
 302          Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
 303
 304
 305config AT91_CF
 306        tristate "AT91 CompactFlash Controller"
 307        depends on PCMCIA && ARCH_AT91RM9200
 308        help
 309          Say Y here to support the CompactFlash controller on AT91 chips.
 310          Or choose M to compile the driver as a module named "at91_cf".
 311
 312config ELECTRA_CF
 313        tristate "Electra CompactFlash Controller"
 314        depends on PCMCIA && PPC_PASEMI
 315        help
 316          Say Y here to support the CompactFlash controller on the
 317          PA Semi Electra eval board.
 318
 319config PCCARD_NONSTATIC
 320        tristate
 321
 322config PCCARD_IODYN
 323        bool
 324
 325endif   # PCCARD
 326