LXR linux/include/scsi/scsi

   1#ifndef _SCSI_SCSI_DEVICE_H
   2#define _SCSI_SCSI_DEVICE_H
   3
   4#include <linux/device.h>
   5#include <linux/list.h>
   6#include <linux/spinlock.h>
   7#include <linux/workqueue.h>
   8#include <linux/blkdev.h>
   9#include <scsi/scsi.h>
  10#include <asm/atomic.h>
  11
  12struct request_queue;
  13struct scsi_cmnd;
  14struct scsi_lun;
  15struct scsi_sense_hdr;
  16
  17struct scsi_mode_data {
  18        __u32   length;
  19        __u16   block_descriptor_length;
  20        __u8    medium_type;
  21        __u8    device_specific;
  22        __u8    header_length;
  23        __u8    longlba:1;
  24};
  25
  26/*
  27 * sdev state: If you alter this, you also need to alter scsi_sysfs.c
  28 * (for the ascii descriptions) and the state model enforcer:
  29 * scsi_lib:scsi_device_set_state().
  30 */
  31enum scsi_device_state {
  32        SDEV_CREATED = 1,       /* device created but not added to sysfs
  33                                 * Only internal commands allowed (for inq) */
  34        SDEV_RUNNING,           /* device properly configured
  35                                 * All commands allowed */
  36        SDEV_CANCEL,            /* beginning to delete device
  37                                 * Only error handler commands allowed */
  38        SDEV_DEL,               /* device deleted 
  39                                 * no commands allowed */
  40        SDEV_QUIESCE,           /* Device quiescent.  No block commands
  41                                 * will be accepted, only specials (which
  42                                 * originate in the mid-layer) */
  43        SDEV_OFFLINE,           /* Device offlined (by error handling or
  44                                 * user request */
  45        SDEV_BLOCK,             /* Device blocked by scsi lld.  No
  46                                 * scsi commands from user or midlayer
  47                                 * should be issued to the scsi
  48                                 * lld. */
  49        SDEV_CREATED_BLOCK,     /* same as above but for created devices */
  50};
  51
  52enum scsi_device_event {
  53        SDEV_EVT_MEDIA_CHANGE   = 1,    /* media has changed */
  54
  55        SDEV_EVT_LAST           = SDEV_EVT_MEDIA_CHANGE,
  56        SDEV_EVT_MAXBITS        = SDEV_EVT_LAST + 1
  57};
  58
  59struct scsi_event {
  60        enum scsi_device_event  evt_type;
  61        struct list_head        node;
  62
  63        /* put union of data structures, for non-simple event types,
  64         * here
  65         */
  66};
  67
  68struct scsi_device {
  69        struct Scsi_Host *host;
  70        struct request_queue *request_queue;
  71
  72        /* the next two are protected by the host->host_lock */
  73        struct list_head    siblings;   /* list of all devices on this host */
  74        struct list_head    same_target_siblings; /* just the devices sharing same target id */
  75
  76        /* this is now protected by the request_queue->queue_lock */
  77        unsigned int device_busy;       /* commands actually active on
  78                                         * low-level. protected by queue_lock. */
  79        spinlock_t list_lock;
  80        struct list_head cmd_list;      /* queue of in use SCSI Command structures */
  81        struct list_head starved_entry;
  82        struct scsi_cmnd *current_cmnd; /* currently active command */
  83        unsigned short queue_depth;     /* How deep of a queue we want */
  84        unsigned short max_queue_depth; /* max queue depth */
  85        unsigned short last_queue_full_depth; /* These two are used by */
  86        unsigned short last_queue_full_count; /* scsi_track_queue_full() */
  87        unsigned long last_queue_full_time;     /* last queue full time */
  88        unsigned long queue_ramp_up_period;     /* ramp up period in jiffies */
  89#define SCSI_DEFAULT_RAMP_UP_PERIOD     (120 * HZ)
  90
  91        unsigned long last_queue_ramp_up;       /* last queue ramp up time */
  92
  93        unsigned int id, lun, channel;
  94
  95        unsigned int manufacturer;      /* Manufacturer of device, for using 
  96                                         * vendor-specific cmd's */
  97        unsigned sector_size;   /* size in bytes */
  98
  99        void *hostdata;         /* available to low-level driver */
 100        char type;
 101        char scsi_level;
 102        char inq_periph_qual;   /* PQ from INQUIRY data */      
 103        unsigned char inquiry_len;      /* valid bytes in 'inquiry' */
 104        unsigned char * inquiry;        /* INQUIRY response data */
 105        const char * vendor;            /* [back_compat] point into 'inquiry' ... */
 106        const char * model;             /* ... after scan; point to static string */
 107        const char * rev;               /* ... "nullnullnullnull" before scan */
 108        unsigned char current_tag;      /* current tag */
 109        struct scsi_target      *sdev_target;   /* used only for single_lun */
 110
 111        unsigned int    sdev_bflags; /* black/white flags as also found in
 112                                 * scsi_devinfo.[hc]. For now used only to
 113                                 * pass settings from slave_alloc to scsi
 114                                 * core. */
 115        unsigned writeable:1;
 116        unsigned removable:1;
 117        unsigned changed:1;     /* Data invalid due to media change */
 118        unsigned busy:1;        /* Used to prevent races */
 119        unsigned lockable:1;    /* Able to prevent media removal */
 120        unsigned locked:1;      /* Media removal disabled */
 121        unsigned borken:1;      /* Tell the Seagate driver to be 
 122                                 * painfully slow on this device */
 123        unsigned disconnect:1;  /* can disconnect */
 124        unsigned soft_reset:1;  /* Uses soft reset option */
 125        unsigned sdtr:1;        /* Device supports SDTR messages */
 126        unsigned wdtr:1;        /* Device supports WDTR messages */
 127        unsigned ppr:1;         /* Device supports PPR messages */
 128        unsigned tagged_supported:1;    /* Supports SCSI-II tagged queuing */
 129        unsigned simple_tags:1; /* simple queue tag messages are enabled */
 130        unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
 131        unsigned was_reset:1;   /* There was a bus reset on the bus for 
 132                                 * this device */
 133        unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
 134                                     * because we did a bus reset. */
 135        unsigned use_10_for_rw:1; /* first try 10-byte read / write */
 136        unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
 137        unsigned skip_ms_page_8:1;      /* do not use MODE SENSE page 0x08 */
 138        unsigned skip_ms_page_3f:1;     /* do not use MODE SENSE page 0x3f */
 139        unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 140        unsigned no_start_on_add:1;     /* do not issue start on add */
 141        unsigned allow_restart:1; /* issue START_UNIT in error handler */
 142        unsigned manage_start_stop:1;   /* Let HLD (sd) manage start/stop */
 143        unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
 144        unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
 145        unsigned select_no_atn:1;
 146        unsigned fix_capacity:1;        /* READ_CAPACITY is too high by 1 */
 147        unsigned guess_capacity:1;      /* READ_CAPACITY might be too high by 1 */
 148        unsigned retry_hwerror:1;       /* Retry HARDWARE_ERROR */
 149        unsigned last_sector_bug:1;     /* do not use multisector accesses on
 150                                           SD_LAST_BUGGY_SECTORS */
 151        unsigned is_visible:1;  /* is the device visible in sysfs */
 152
 153        DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
 154        struct list_head event_list;    /* asserted events */
 155        struct work_struct event_work;
 156
 157        unsigned int device_blocked;    /* Device returned QUEUE_FULL. */
 158
 159        unsigned int max_device_blocked; /* what device_blocked counts down from  */
 160#define SCSI_DEFAULT_DEVICE_BLOCKED     3
 161
 162        atomic_t iorequest_cnt;
 163        atomic_t iodone_cnt;
 164        atomic_t ioerr_cnt;
 165
 166        struct device           sdev_gendev,
 167                                sdev_dev;
 168
 169        struct execute_work     ew; /* used to get process context on put */
 170
 171        struct scsi_dh_data     *scsi_dh_data;
 172        enum scsi_device_state sdev_state;
 173        unsigned long           sdev_data[0];
 174} __attribute__((aligned(sizeof(unsigned long))));
 175
 176struct scsi_dh_devlist {
 177        char *vendor;
 178        char *model;
 179};
 180
 181typedef void (*activate_complete)(void *, int);
 182struct scsi_device_handler {
 183        /* Used by the infrastructure */
 184        struct list_head list; /* list of scsi_device_handlers */
 185
 186        /* Filled by the hardware handler */
 187        struct module *module;
 188        const char *name;
 189        const struct scsi_dh_devlist *devlist;
 190        int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
 191        int (*attach)(struct scsi_device *);
 192        void (*detach)(struct scsi_device *);
 193        int (*activate)(struct scsi_device *, activate_complete, void *);
 194        int (*prep_fn)(struct scsi_device *, struct request *);
 195        int (*set_params)(struct scsi_device *, const char *);
 196};
 197
 198struct scsi_dh_data {
 199        struct scsi_device_handler *scsi_dh;
 200        struct scsi_device *sdev;
 201        struct kref kref;
 202        char buf[0];
 203};
 204
 205#define to_scsi_device(d)       \
 206        container_of(d, struct scsi_device, sdev_gendev)
 207#define class_to_sdev(d)        \
 208        container_of(d, struct scsi_device, sdev_dev)
 209#define transport_class_to_sdev(class_dev) \
 210        to_scsi_device(class_dev->parent)
 211
 212#define sdev_printk(prefix, sdev, fmt, a...)    \
 213        dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
 214
 215#define scmd_printk(prefix, scmd, fmt, a...)                            \
 216        (scmd)->request->rq_disk ?                                      \
 217        sdev_printk(prefix, (scmd)->device, "[%s] " fmt,                \
 218                    (scmd)->request->rq_disk->disk_name, ##a) :         \
 219        sdev_printk(prefix, (scmd)->device, fmt, ##a)
 220
 221enum scsi_target_state {
 222        STARGET_CREATED = 1,
 223        STARGET_RUNNING,
 224        STARGET_DEL,
 225};
 226
 227/*
 228 * scsi_target: representation of a scsi target, for now, this is only
 229 * used for single_lun devices. If no one has active IO to the target,
 230 * starget_sdev_user is NULL, else it points to the active sdev.
 231 */
 232struct scsi_target {
 233        struct scsi_device      *starget_sdev_user;
 234        struct list_head        siblings;
 235        struct list_head        devices;
 236        struct device           dev;
 237        unsigned int            reap_ref; /* protected by the host lock */
 238        unsigned int            channel;
 239        unsigned int            id; /* target id ... replace
 240                                     * scsi_device.id eventually */
 241        unsigned int            create:1; /* signal that it needs to be added */
 242        unsigned int            single_lun:1;   /* Indicates we should only
 243                                                 * allow I/O to one of the luns
 244                                                 * for the device at a time. */
 245        unsigned int            pdt_1f_for_no_lun;      /* PDT = 0x1f */
 246                                                /* means no lun present */
 247        /* commands actually active on LLD. protected by host lock. */
 248        unsigned int            target_busy;
 249        /*
 250         * LLDs should set this in the slave_alloc host template callout.
 251         * If set to zero then there is not limit.
 252         */
 253        unsigned int            can_queue;
 254        unsigned int            target_blocked;
 255        unsigned int            max_target_blocked;
 256#define SCSI_DEFAULT_TARGET_BLOCKED     3
 257
 258        char                    scsi_level;
 259        struct execute_work     ew;
 260        enum scsi_target_state  state;
 261        void                    *hostdata; /* available to low-level driver */
 262        unsigned long           starget_data[0]; /* for the transport */
 263        /* starget_data must be the last element!!!! */
 264} __attribute__((aligned(sizeof(unsigned long))));
 265
 266#define to_scsi_target(d)       container_of(d, struct scsi_target, dev)
 267static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
 268{
 269        return to_scsi_target(sdev->sdev_gendev.parent);
 270}
 271#define transport_class_to_starget(class_dev) \
 272        to_scsi_target(class_dev->parent)
 273
 274#define starget_printk(prefix, starget, fmt, a...)      \
 275        dev_printk(prefix, &(starget)->dev, fmt, ##a)
 276
 277extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
 278                uint, uint, uint, void *hostdata);
 279extern int scsi_add_device(struct Scsi_Host *host, uint channel,
 280                           uint target, uint lun);
 281extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
 282extern void scsi_remove_device(struct scsi_device *);
 283extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
 284
 285extern int scsi_device_get(struct scsi_device *);
 286extern void scsi_device_put(struct scsi_device *);
 287extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
 288                                              uint, uint, uint);
 289extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
 290                                                uint, uint, uint);
 291extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
 292                                                        uint);
 293extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
 294                                                          uint);
 295extern void starget_for_each_device(struct scsi_target *, void *,
 296                     void (*fn)(struct scsi_device *, void *));
 297extern void __starget_for_each_device(struct scsi_target *, void *,
 298                                      void (*fn)(struct scsi_device *,
 299                                                 void *));
 300
 301/* only exposed to implement shost_for_each_device */
 302extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
 303                                                  struct scsi_device *);
 304
 305/**
 306 * shost_for_each_device - iterate over all devices of a host
 307 * @sdev: the &struct scsi_device to use as a cursor
 308 * @shost: the &struct scsi_host to iterate over
 309 *
 310 * Iterator that returns each device attached to @shost.  This loop
 311 * takes a reference on each device and releases it at the end.  If
 312 * you break out of the loop, you must call scsi_device_put(sdev).
 313 */
 314#define shost_for_each_device(sdev, shost) \
 315        for ((sdev) = __scsi_iterate_devices((shost), NULL); \
 316             (sdev); \
 317             (sdev) = __scsi_iterate_devices((shost), (sdev)))
 318
 319/**
 320 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
 321 * @sdev: the &struct scsi_device to use as a cursor
 322 * @shost: the &struct scsi_host to iterate over
 323 *
 324 * Iterator that returns each device attached to @shost.  It does _not_
 325 * take a reference on the scsi_device, so the whole loop must be
 326 * protected by shost->host_lock.
 327 *
 328 * Note: The only reason to use this is because you need to access the
 329 * device list in interrupt context.  Otherwise you really want to use
 330 * shost_for_each_device instead.
 331 */
 332#define __shost_for_each_device(sdev, shost) \
 333        list_for_each_entry((sdev), &((shost)->__devices), siblings)
 334
 335extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
 336extern int scsi_track_queue_full(struct scsi_device *, int);
 337
 338extern int scsi_set_medium_removal(struct scsi_device *, char);
 339
 340extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
 341                           unsigned char *buffer, int len, int timeout,
 342                           int retries, struct scsi_mode_data *data,
 343                           struct scsi_sense_hdr *);
 344extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
 345                            int modepage, unsigned char *buffer, int len,
 346                            int timeout, int retries,
 347                            struct scsi_mode_data *data,
 348                            struct scsi_sense_hdr *);
 349extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
 350                                int retries, struct scsi_sense_hdr *sshdr);
 351extern unsigned char *scsi_get_vpd_page(struct scsi_device *, u8 page);
 352extern int scsi_device_set_state(struct scsi_device *sdev,
 353                                 enum scsi_device_state state);
 354extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
 355                                          gfp_t gfpflags);
 356extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
 357extern void sdev_evt_send_simple(struct scsi_device *sdev,
 358                          enum scsi_device_event evt_type, gfp_t gfpflags);
 359extern int scsi_device_quiesce(struct scsi_device *sdev);
 360extern void scsi_device_resume(struct scsi_device *sdev);
 361extern void scsi_target_quiesce(struct scsi_target *);
 362extern void scsi_target_resume(struct scsi_target *);
 363extern void scsi_scan_target(struct device *parent, unsigned int channel,
 364                             unsigned int id, unsigned int lun, int rescan);
 365extern void scsi_target_reap(struct scsi_target *);
 366extern void scsi_target_block(struct device *);
 367extern void scsi_target_unblock(struct device *);
 368extern void scsi_remove_target(struct device *);
 369extern void int_to_scsilun(unsigned int, struct scsi_lun *);
 370extern int scsilun_to_int(struct scsi_lun *);
 371extern const char *scsi_device_state_name(enum scsi_device_state);
 372extern int scsi_is_sdev_device(const struct device *);
 373extern int scsi_is_target_device(const struct device *);
 374extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
 375                        int data_direction, void *buffer, unsigned bufflen,
 376                        unsigned char *sense, int timeout, int retries,
 377                        int flag, int *resid);
 378extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
 379                            int data_direction, void *buffer, unsigned bufflen,
 380                            struct scsi_sense_hdr *, int timeout, int retries,
 381                            int *resid);
 382
 383static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
 384{
 385        return device_reprobe(&sdev->sdev_gendev);
 386}
 387
 388static inline unsigned int sdev_channel(struct scsi_device *sdev)
 389{
 390        return sdev->channel;
 391}
 392
 393static inline unsigned int sdev_id(struct scsi_device *sdev)
 394{
 395        return sdev->id;
 396}
 397
 398#define scmd_id(scmd) sdev_id((scmd)->device)
 399#define scmd_channel(scmd) sdev_channel((scmd)->device)
 400
 401/*
 402 * checks for positions of the SCSI state machine
 403 */
 404static inline int scsi_device_online(struct scsi_device *sdev)
 405{
 406        return (sdev->sdev_state != SDEV_OFFLINE &&
 407                sdev->sdev_state != SDEV_DEL);
 408}
 409static inline int scsi_device_blocked(struct scsi_device *sdev)
 410{
 411        return sdev->sdev_state == SDEV_BLOCK ||
 412                sdev->sdev_state == SDEV_CREATED_BLOCK;
 413}
 414static inline int scsi_device_created(struct scsi_device *sdev)
 415{
 416        return sdev->sdev_state == SDEV_CREATED ||
 417                sdev->sdev_state == SDEV_CREATED_BLOCK;
 418}
 419
 420/* accessor functions for the SCSI parameters */
 421static inline int scsi_device_sync(struct scsi_device *sdev)
 422{
 423        return sdev->sdtr;
 424}
 425static inline int scsi_device_wide(struct scsi_device *sdev)
 426{
 427        return sdev->wdtr;
 428}
 429static inline int scsi_device_dt(struct scsi_device *sdev)
 430{
 431        return sdev->ppr;
 432}
 433static inline int scsi_device_dt_only(struct scsi_device *sdev)
 434{
 435        if (sdev->inquiry_len < 57)
 436                return 0;
 437        return (sdev->inquiry[56] & 0x0c) == 0x04;
 438}
 439static inline int scsi_device_ius(struct scsi_device *sdev)
 440{
 441        if (sdev->inquiry_len < 57)
 442                return 0;
 443        return sdev->inquiry[56] & 0x01;
 444}
 445static inline int scsi_device_qas(struct scsi_device *sdev)
 446{
 447        if (sdev->inquiry_len < 57)
 448                return 0;
 449        return sdev->inquiry[56] & 0x02;
 450}
 451static inline int scsi_device_enclosure(struct scsi_device *sdev)
 452{
 453        return sdev->inquiry[6] & (1<<6);
 454}
 455
 456static inline int scsi_device_protection(struct scsi_device *sdev)
 457{
 458        return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
 459}
 460
 461#define MODULE_ALIAS_SCSI_DEVICE(type) \
 462        MODULE_ALIAS("scsi:t-" __stringify(type) "*")
 463#define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
 464
 465#endif /* _SCSI_SCSI_DEVICE_H */
 466