/*
 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
 * Copyright (c) 2008-2009 Marvell Semiconductor
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include "dsa_priv.h"

#define REG_PORT(p)             (8 + (p))
#define REG_GLOBAL              0x0f

static int reg_read(struct dsa_switch *ds, int addr, int reg)
{
        return mdiobus_read(ds->master_mii_bus, addr, reg);
}

#define REG_READ(addr, reg)                                     \
        ({                                                      \
                int __ret;                                      \
                                                                \
                __ret = reg_read(ds, addr, reg);                \
                if (__ret < 0)                                  \
                        return __ret;                           \
                __ret;                                          \
        })


static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
{
        return mdiobus_write(ds->master_mii_bus, addr, reg, val);
}

#define REG_WRITE(addr, reg, val)                               \
        ({                                                      \
                int __ret;                                      \
                                                                \
                __ret = reg_write(ds, addr, reg, val);          \
                if (__ret < 0)                                  \
                        return __ret;                           \
        })

static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
{
        int ret;

        ret = mdiobus_read(bus, REG_PORT(0), 0x03);
        if (ret >= 0) {
                ret &= 0xfff0;
                if (ret == 0x0600)
                        return "Marvell 88E6060";
        }

        return NULL;
}

static int mv88e6060_switch_reset(struct dsa_switch *ds)
{
        int i;
        int ret;

        /*
         * Set all ports to the disabled state.
         */
        for (i = 0; i < 6; i++) {
                ret = REG_READ(REG_PORT(i), 0x04);
                REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
        }

        /*
         * Wait for transmit queues to drain.
         */
        msleep(2);

        /*
         * Reset the switch.
         */
        REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);

        /*
         * Wait up to one second for reset to complete.
         */
        for (i = 0; i < 1000; i++) {
                ret = REG_READ(REG_GLOBAL, 0x00);
                if ((ret & 0x8000) == 0x0000)
                        break;

                msleep(1);
        }
        if (i == 1000)
                return -ETIMEDOUT;

        return 0;
}

static int mv88e6060_setup_global(struct dsa_switch *ds)
{
        /*
         * Disable discarding of frames with excessive collisions,
         * set the maximum frame size to 1536 bytes, and mask all
         * interrupt sources.
         */
        REG_WRITE(REG_GLOBAL, 0x04, 0x0800);

        /*
         * Enable automatic address learning, set the address
         * database size to 1024 entries, and set the default aging
         * time to 5 minutes.
         */
        REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);

        return 0;
}

static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
{
        int addr = REG_PORT(p);

        /*
         * Do not force flow control, disable Ingress and Egress
         * Header tagging, disable VLAN tunneling, and set the port
         * state to Forwarding.  Additionally, if this is the CPU
         * port, enable Ingress and Egress Trailer tagging mode.
         */
        REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ?  0x4103 : 0x0003);

        /*
         * Port based VLAN map: give each port its own address
         * database, allow the CPU port to talk to each of the 'real'
         * ports, and allow each of the 'real' ports to only talk to
         * the CPU port.
         */
        REG_WRITE(addr, 0x06,
                        ((p & 0xf) << 12) |
                         (dsa_is_cpu_port(ds, p) ?
                                ds->phys_port_mask :
                                (1 << ds->dst->cpu_port)));

        /*
         * Port Association Vector: when learning source addresses
         * of packets, add the address to the address database using
         * a port bitmap that has only the bit for this port set and
         * the other bits clear.
         */
        REG_WRITE(addr, 0x0b, 1 << p);

        return 0;
}

static int mv88e6060_setup(struct dsa_switch *ds)
{
        int i;
        int ret;

        ret = mv88e6060_switch_reset(ds);
        if (ret < 0)
                return ret;

        /* @@@ initialise atu */

        ret = mv88e6060_setup_global(ds);
        if (ret < 0)
                return ret;

        for (i = 0; i < 6; i++) {
                ret = mv88e6060_setup_port(ds, i);
                if (ret < 0)
                        return ret;
        }

        return 0;
}

static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
{
        REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
        REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
        REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);

        return 0;
}

static int mv88e6060_port_to_phy_addr(int port)
{
        if (port >= 0 && port <= 5)
                return port;
        return -1;
}

static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
{
        int addr;

        addr = mv88e6060_port_to_phy_addr(port);
        if (addr == -1)
                return 0xffff;

        return reg_read(ds, addr, regnum);
}

static int
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
{
        int addr;

        addr = mv88e6060_port_to_phy_addr(port);
        if (addr == -1)
                return 0xffff;

        return reg_write(ds, addr, regnum, val);
}

static void mv88e6060_poll_link(struct dsa_switch *ds)
{
        int i;

        for (i = 0; i < DSA_MAX_PORTS; i++) {
                struct net_device *dev;
                int uninitialized_var(port_status);
                int link;
                int speed;
                int duplex;
                int fc;

                dev = ds->ports[i];
                if (dev == NULL)
                        continue;

                link = 0;
                if (dev->flags & IFF_UP) {
                        port_status = reg_read(ds, REG_PORT(i), 0x00);
                        if (port_status < 0)
                                continue;

                        link = !!(port_status & 0x1000);
                }

                if (!link) {
                        if (netif_carrier_ok(dev)) {
                                printk(KERN_INFO "%s: link down\n", dev->name);
                                netif_carrier_off(dev);
                        }
                        continue;
                }

                speed = (port_status & 0x0100) ? 100 : 10;
                duplex = (port_status & 0x0200) ? 1 : 0;
                fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;

                if (!netif_carrier_ok(dev)) {
                        printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
                                         "flow control %sabled\n", dev->name,
                                         speed, duplex ? "full" : "half",
                                         fc ? "en" : "dis");
                        netif_carrier_on(dev);
                }
        }
}

static struct dsa_switch_driver mv88e6060_switch_driver = {
        .tag_protocol   = htons(ETH_P_TRAILER),
        .probe          = mv88e6060_probe,
        .setup          = mv88e6060_setup,
        .set_addr       = mv88e6060_set_addr,
        .phy_read       = mv88e6060_phy_read,
        .phy_write      = mv88e6060_phy_write,
        .poll_link      = mv88e6060_poll_link,
};

static int __init mv88e6060_init(void)
{
        register_switch_driver(&mv88e6060_switch_driver);
        return 0;
}
module_init(mv88e6060_init);

static void __exit mv88e6060_cleanup(void)
{
        unregister_switch_driver(&mv88e6060_switch_driver);
}
module_exit(mv88e6060_cleanup);