linux/drivers/net/myri10ge/myri10ge.c
<<
>>
Prefs
   1/*************************************************************************
   2 * myri10ge.c: Myricom Myri-10G Ethernet driver.
   3 *
   4 * Copyright (C) 2005 - 2009 Myricom, Inc.
   5 * All rights reserved.
   6 *
   7 * Redistribution and use in source and binary forms, with or without
   8 * modification, are permitted provided that the following conditions
   9 * are met:
  10 * 1. Redistributions of source code must retain the above copyright
  11 *    notice, this list of conditions and the following disclaimer.
  12 * 2. Redistributions in binary form must reproduce the above copyright
  13 *    notice, this list of conditions and the following disclaimer in the
  14 *    documentation and/or other materials provided with the distribution.
  15 * 3. Neither the name of Myricom, Inc. nor the names of its contributors
  16 *    may be used to endorse or promote products derived from this software
  17 *    without specific prior written permission.
  18 *
  19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  20 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  22 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  23 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 * POSSIBILITY OF SUCH DAMAGE.
  30 *
  31 *
  32 * If the eeprom on your board is not recent enough, you will need to get a
  33 * newer firmware image at:
  34 *   http://www.myri.com/scs/download-Myri10GE.html
  35 *
  36 * Contact Information:
  37 *   <help@myri.com>
  38 *   Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
  39 *************************************************************************/
  40
  41#include <linux/tcp.h>
  42#include <linux/netdevice.h>
  43#include <linux/skbuff.h>
  44#include <linux/string.h>
  45#include <linux/module.h>
  46#include <linux/pci.h>
  47#include <linux/dma-mapping.h>
  48#include <linux/etherdevice.h>
  49#include <linux/if_ether.h>
  50#include <linux/if_vlan.h>
  51#include <linux/inet_lro.h>
  52#include <linux/dca.h>
  53#include <linux/ip.h>
  54#include <linux/inet.h>
  55#include <linux/in.h>
  56#include <linux/ethtool.h>
  57#include <linux/firmware.h>
  58#include <linux/delay.h>
  59#include <linux/timer.h>
  60#include <linux/vmalloc.h>
  61#include <linux/crc32.h>
  62#include <linux/moduleparam.h>
  63#include <linux/io.h>
  64#include <linux/log2.h>
  65#include <net/checksum.h>
  66#include <net/ip.h>
  67#include <net/tcp.h>
  68#include <asm/byteorder.h>
  69#include <asm/io.h>
  70#include <asm/processor.h>
  71#ifdef CONFIG_MTRR
  72#include <asm/mtrr.h>
  73#endif
  74
  75#include "myri10ge_mcp.h"
  76#include "myri10ge_mcp_gen_header.h"
  77
  78#define MYRI10GE_VERSION_STR "1.5.1-1.451"
  79
  80MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
  81MODULE_AUTHOR("Maintainer: help@myri.com");
  82MODULE_VERSION(MYRI10GE_VERSION_STR);
  83MODULE_LICENSE("Dual BSD/GPL");
  84
  85#define MYRI10GE_MAX_ETHER_MTU 9014
  86
  87#define MYRI10GE_ETH_STOPPED 0
  88#define MYRI10GE_ETH_STOPPING 1
  89#define MYRI10GE_ETH_STARTING 2
  90#define MYRI10GE_ETH_RUNNING 3
  91#define MYRI10GE_ETH_OPEN_FAILED 4
  92
  93#define MYRI10GE_EEPROM_STRINGS_SIZE 256
  94#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
  95#define MYRI10GE_MAX_LRO_DESCRIPTORS 8
  96#define MYRI10GE_LRO_MAX_PKTS 64
  97
  98#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
  99#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
 100
 101#define MYRI10GE_ALLOC_ORDER 0
 102#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
 103#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
 104
 105#define MYRI10GE_MAX_SLICES 32
 106
 107struct myri10ge_rx_buffer_state {
 108        struct page *page;
 109        int page_offset;
 110         DECLARE_PCI_UNMAP_ADDR(bus)
 111         DECLARE_PCI_UNMAP_LEN(len)
 112};
 113
 114struct myri10ge_tx_buffer_state {
 115        struct sk_buff *skb;
 116        int last;
 117         DECLARE_PCI_UNMAP_ADDR(bus)
 118         DECLARE_PCI_UNMAP_LEN(len)
 119};
 120
 121struct myri10ge_cmd {
 122        u32 data0;
 123        u32 data1;
 124        u32 data2;
 125};
 126
 127struct myri10ge_rx_buf {
 128        struct mcp_kreq_ether_recv __iomem *lanai;      /* lanai ptr for recv ring */
 129        struct mcp_kreq_ether_recv *shadow;     /* host shadow of recv ring */
 130        struct myri10ge_rx_buffer_state *info;
 131        struct page *page;
 132        dma_addr_t bus;
 133        int page_offset;
 134        int cnt;
 135        int fill_cnt;
 136        int alloc_fail;
 137        int mask;               /* number of rx slots -1 */
 138        int watchdog_needed;
 139};
 140
 141struct myri10ge_tx_buf {
 142        struct mcp_kreq_ether_send __iomem *lanai;      /* lanai ptr for sendq */
 143        __be32 __iomem *send_go;        /* "go" doorbell ptr */
 144        __be32 __iomem *send_stop;      /* "stop" doorbell ptr */
 145        struct mcp_kreq_ether_send *req_list;   /* host shadow of sendq */
 146        char *req_bytes;
 147        struct myri10ge_tx_buffer_state *info;
 148        int mask;               /* number of transmit slots -1  */
 149        int req ____cacheline_aligned;  /* transmit slots submitted     */
 150        int pkt_start;          /* packets started */
 151        int stop_queue;
 152        int linearized;
 153        int done ____cacheline_aligned; /* transmit slots completed     */
 154        int pkt_done;           /* packets completed */
 155        int wake_queue;
 156        int queue_active;
 157};
 158
 159struct myri10ge_rx_done {
 160        struct mcp_slot *entry;
 161        dma_addr_t bus;
 162        int cnt;
 163        int idx;
 164        struct net_lro_mgr lro_mgr;
 165        struct net_lro_desc lro_desc[MYRI10GE_MAX_LRO_DESCRIPTORS];
 166};
 167
 168struct myri10ge_slice_netstats {
 169        unsigned long rx_packets;
 170        unsigned long tx_packets;
 171        unsigned long rx_bytes;
 172        unsigned long tx_bytes;
 173        unsigned long rx_dropped;
 174        unsigned long tx_dropped;
 175};
 176
 177struct myri10ge_slice_state {
 178        struct myri10ge_tx_buf tx;      /* transmit ring        */
 179        struct myri10ge_rx_buf rx_small;
 180        struct myri10ge_rx_buf rx_big;
 181        struct myri10ge_rx_done rx_done;
 182        struct net_device *dev;
 183        struct napi_struct napi;
 184        struct myri10ge_priv *mgp;
 185        struct myri10ge_slice_netstats stats;
 186        __be32 __iomem *irq_claim;
 187        struct mcp_irq_data *fw_stats;
 188        dma_addr_t fw_stats_bus;
 189        int watchdog_tx_done;
 190        int watchdog_tx_req;
 191        int watchdog_rx_done;
 192#ifdef CONFIG_MYRI10GE_DCA
 193        int cached_dca_tag;
 194        int cpu;
 195        __be32 __iomem *dca_tag;
 196#endif
 197        char irq_desc[32];
 198};
 199
 200struct myri10ge_priv {
 201        struct myri10ge_slice_state *ss;
 202        int tx_boundary;        /* boundary transmits cannot cross */
 203        int num_slices;
 204        int running;            /* running?             */
 205        int csum_flag;          /* rx_csums?            */
 206        int small_bytes;
 207        int big_bytes;
 208        int max_intr_slots;
 209        struct net_device *dev;
 210        struct net_device_stats stats;
 211        spinlock_t stats_lock;
 212        u8 __iomem *sram;
 213        int sram_size;
 214        unsigned long board_span;
 215        unsigned long iomem_base;
 216        __be32 __iomem *irq_deassert;
 217        char *mac_addr_string;
 218        struct mcp_cmd_response *cmd;
 219        dma_addr_t cmd_bus;
 220        struct pci_dev *pdev;
 221        int msi_enabled;
 222        int msix_enabled;
 223        struct msix_entry *msix_vectors;
 224#ifdef CONFIG_MYRI10GE_DCA
 225        int dca_enabled;
 226#endif
 227        u32 link_state;
 228        unsigned int rdma_tags_available;
 229        int intr_coal_delay;
 230        __be32 __iomem *intr_coal_delay_ptr;
 231        int mtrr;
 232        int wc_enabled;
 233        int down_cnt;
 234        wait_queue_head_t down_wq;
 235        struct work_struct watchdog_work;
 236        struct timer_list watchdog_timer;
 237        int watchdog_resets;
 238        int watchdog_pause;
 239        int pause;
 240        char *fw_name;
 241        char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
 242        char *product_code_string;
 243        char fw_version[128];
 244        int fw_ver_major;
 245        int fw_ver_minor;
 246        int fw_ver_tiny;
 247        int adopted_rx_filter_bug;
 248        u8 mac_addr[6];         /* eeprom mac address */
 249        unsigned long serial_number;
 250        int vendor_specific_offset;
 251        int fw_multicast_support;
 252        unsigned long features;
 253        u32 max_tso6;
 254        u32 read_dma;
 255        u32 write_dma;
 256        u32 read_write_dma;
 257        u32 link_changes;
 258        u32 msg_enable;
 259        unsigned int board_number;
 260        int rebooted;
 261};
 262
 263static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
 264static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 265static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 266static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
 267
 268static char *myri10ge_fw_name = NULL;
 269module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
 270MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
 271
 272#define MYRI10GE_MAX_BOARDS 8
 273static char *myri10ge_fw_names[MYRI10GE_MAX_BOARDS] =
 274    {[0 ... (MYRI10GE_MAX_BOARDS - 1)] = NULL };
 275module_param_array_named(myri10ge_fw_names, myri10ge_fw_names, charp, NULL,
 276                         0444);
 277MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image names per board");
 278
 279static int myri10ge_ecrc_enable = 1;
 280module_param(myri10ge_ecrc_enable, int, S_IRUGO);
 281MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
 282
 283static int myri10ge_small_bytes = -1;   /* -1 == auto */
 284module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
 285MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
 286
 287static int myri10ge_msi = 1;    /* enable msi by default */
 288module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
 289MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
 290
 291static int myri10ge_intr_coal_delay = 75;
 292module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
 293MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
 294
 295static int myri10ge_flow_control = 1;
 296module_param(myri10ge_flow_control, int, S_IRUGO);
 297MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
 298
 299static int myri10ge_deassert_wait = 1;
 300module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
 301MODULE_PARM_DESC(myri10ge_deassert_wait,
 302                 "Wait when deasserting legacy interrupts");
 303
 304static int myri10ge_force_firmware = 0;
 305module_param(myri10ge_force_firmware, int, S_IRUGO);
 306MODULE_PARM_DESC(myri10ge_force_firmware,
 307                 "Force firmware to assume aligned completions");
 308
 309static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 310module_param(myri10ge_initial_mtu, int, S_IRUGO);
 311MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
 312
 313static int myri10ge_napi_weight = 64;
 314module_param(myri10ge_napi_weight, int, S_IRUGO);
 315MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
 316
 317static int myri10ge_watchdog_timeout = 1;
 318module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
 319MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
 320
 321static int myri10ge_max_irq_loops = 1048576;
 322module_param(myri10ge_max_irq_loops, int, S_IRUGO);
 323MODULE_PARM_DESC(myri10ge_max_irq_loops,
 324                 "Set stuck legacy IRQ detection threshold");
 325
 326#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
 327
 328static int myri10ge_debug = -1; /* defaults above */
 329module_param(myri10ge_debug, int, 0);
 330MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
 331
 332static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
 333module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
 334MODULE_PARM_DESC(myri10ge_lro_max_pkts,
 335                 "Number of LRO packets to be aggregated");
 336
 337static int myri10ge_fill_thresh = 256;
 338module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 339MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
 340
 341static int myri10ge_reset_recover = 1;
 342
 343static int myri10ge_max_slices = 1;
 344module_param(myri10ge_max_slices, int, S_IRUGO);
 345MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
 346
 347static int myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
 348module_param(myri10ge_rss_hash, int, S_IRUGO);
 349MODULE_PARM_DESC(myri10ge_rss_hash, "Type of RSS hashing to do");
 350
 351static int myri10ge_dca = 1;
 352module_param(myri10ge_dca, int, S_IRUGO);
 353MODULE_PARM_DESC(myri10ge_dca, "Enable DCA if possible");
 354
 355#define MYRI10GE_FW_OFFSET 1024*1024
 356#define MYRI10GE_HIGHPART_TO_U32(X) \
 357(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
 358#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
 359
 360#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
 361
 362static void myri10ge_set_multicast_list(struct net_device *dev);
 363static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
 364                                         struct net_device *dev);
 365
 366static inline void put_be32(__be32 val, __be32 __iomem * p)
 367{
 368        __raw_writel((__force __u32) val, (__force void __iomem *)p);
 369}
 370
 371static struct net_device_stats *myri10ge_get_stats(struct net_device *dev);
 372
 373static int
 374myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
 375                  struct myri10ge_cmd *data, int atomic)
 376{
 377        struct mcp_cmd *buf;
 378        char buf_bytes[sizeof(*buf) + 8];
 379        struct mcp_cmd_response *response = mgp->cmd;
 380        char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
 381        u32 dma_low, dma_high, result, value;
 382        int sleep_total = 0;
 383
 384        /* ensure buf is aligned to 8 bytes */
 385        buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
 386
 387        buf->data0 = htonl(data->data0);
 388        buf->data1 = htonl(data->data1);
 389        buf->data2 = htonl(data->data2);
 390        buf->cmd = htonl(cmd);
 391        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 392        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 393
 394        buf->response_addr.low = htonl(dma_low);
 395        buf->response_addr.high = htonl(dma_high);
 396        response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
 397        mb();
 398        myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
 399
 400        /* wait up to 15ms. Longest command is the DMA benchmark,
 401         * which is capped at 5ms, but runs from a timeout handler
 402         * that runs every 7.8ms. So a 15ms timeout leaves us with
 403         * a 2.2ms margin
 404         */
 405        if (atomic) {
 406                /* if atomic is set, do not sleep,
 407                 * and try to get the completion quickly
 408                 * (1ms will be enough for those commands) */
 409                for (sleep_total = 0;
 410                     sleep_total < 1000
 411                     && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 412                     sleep_total += 10) {
 413                        udelay(10);
 414                        mb();
 415                }
 416        } else {
 417                /* use msleep for most command */
 418                for (sleep_total = 0;
 419                     sleep_total < 15
 420                     && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 421                     sleep_total++)
 422                        msleep(1);
 423        }
 424
 425        result = ntohl(response->result);
 426        value = ntohl(response->data);
 427        if (result != MYRI10GE_NO_RESPONSE_RESULT) {
 428                if (result == 0) {
 429                        data->data0 = value;
 430                        return 0;
 431                } else if (result == MXGEFW_CMD_UNKNOWN) {
 432                        return -ENOSYS;
 433                } else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
 434                        return -E2BIG;
 435                } else if (result == MXGEFW_CMD_ERROR_RANGE &&
 436                           cmd == MXGEFW_CMD_ENABLE_RSS_QUEUES &&
 437                           (data->
 438                            data1 & MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES) !=
 439                           0) {
 440                        return -ERANGE;
 441                } else {
 442                        dev_err(&mgp->pdev->dev,
 443                                "command %d failed, result = %d\n",
 444                                cmd, result);
 445                        return -ENXIO;
 446                }
 447        }
 448
 449        dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
 450                cmd, result);
 451        return -EAGAIN;
 452}
 453
 454/*
 455 * The eeprom strings on the lanaiX have the format
 456 * SN=x\0
 457 * MAC=x:x:x:x:x:x\0
 458 * PT:ddd mmm xx xx:xx:xx xx\0
 459 * PV:ddd mmm xx xx:xx:xx xx\0
 460 */
 461static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
 462{
 463        char *ptr, *limit;
 464        int i;
 465
 466        ptr = mgp->eeprom_strings;
 467        limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
 468
 469        while (*ptr != '\0' && ptr < limit) {
 470                if (memcmp(ptr, "MAC=", 4) == 0) {
 471                        ptr += 4;
 472                        mgp->mac_addr_string = ptr;
 473                        for (i = 0; i < 6; i++) {
 474                                if ((ptr + 2) > limit)
 475                                        goto abort;
 476                                mgp->mac_addr[i] =
 477                                    simple_strtoul(ptr, &ptr, 16);
 478                                ptr += 1;
 479                        }
 480                }
 481                if (memcmp(ptr, "PC=", 3) == 0) {
 482                        ptr += 3;
 483                        mgp->product_code_string = ptr;
 484                }
 485                if (memcmp((const void *)ptr, "SN=", 3) == 0) {
 486                        ptr += 3;
 487                        mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
 488                }
 489                while (ptr < limit && *ptr++) ;
 490        }
 491
 492        return 0;
 493
 494abort:
 495        dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
 496        return -ENXIO;
 497}
 498
 499/*
 500 * Enable or disable periodic RDMAs from the host to make certain
 501 * chipsets resend dropped PCIe messages
 502 */
 503
 504static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
 505{
 506        char __iomem *submit;
 507        __be32 buf[16] __attribute__ ((__aligned__(8)));
 508        u32 dma_low, dma_high;
 509        int i;
 510
 511        /* clear confirmation addr */
 512        mgp->cmd->data = 0;
 513        mb();
 514
 515        /* send a rdma command to the PCIe engine, and wait for the
 516         * response in the confirmation address.  The firmware should
 517         * write a -1 there to indicate it is alive and well
 518         */
 519        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 520        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 521
 522        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 523        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 524        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 525        buf[3] = htonl(dma_high);       /* dummy addr MSW */
 526        buf[4] = htonl(dma_low);        /* dummy addr LSW */
 527        buf[5] = htonl(enable); /* enable? */
 528
 529        submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
 530
 531        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 532        for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
 533                msleep(1);
 534        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
 535                dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
 536                        (enable ? "enable" : "disable"));
 537}
 538
 539static int
 540myri10ge_validate_firmware(struct myri10ge_priv *mgp,
 541                           struct mcp_gen_header *hdr)
 542{
 543        struct device *dev = &mgp->pdev->dev;
 544
 545        /* check firmware type */
 546        if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
 547                dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
 548                return -EINVAL;
 549        }
 550
 551        /* save firmware version for ethtool */
 552        strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
 553
 554        sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 555               &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 556
 557        if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR
 558              && mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 559                dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 560                dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 561                        MXGEFW_VERSION_MINOR);
 562                return -EINVAL;
 563        }
 564        return 0;
 565}
 566
 567static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
 568{
 569        unsigned crc, reread_crc;
 570        const struct firmware *fw;
 571        struct device *dev = &mgp->pdev->dev;
 572        unsigned char *fw_readback;
 573        struct mcp_gen_header *hdr;
 574        size_t hdr_offset;
 575        int status;
 576        unsigned i;
 577
 578        if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
 579                dev_err(dev, "Unable to load %s firmware image via hotplug\n",
 580                        mgp->fw_name);
 581                status = -EINVAL;
 582                goto abort_with_nothing;
 583        }
 584
 585        /* check size */
 586
 587        if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
 588            fw->size < MCP_HEADER_PTR_OFFSET + 4) {
 589                dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
 590                status = -EINVAL;
 591                goto abort_with_fw;
 592        }
 593
 594        /* check id */
 595        hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
 596        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
 597                dev_err(dev, "Bad firmware file\n");
 598                status = -EINVAL;
 599                goto abort_with_fw;
 600        }
 601        hdr = (void *)(fw->data + hdr_offset);
 602
 603        status = myri10ge_validate_firmware(mgp, hdr);
 604        if (status != 0)
 605                goto abort_with_fw;
 606
 607        crc = crc32(~0, fw->data, fw->size);
 608        for (i = 0; i < fw->size; i += 256) {
 609                myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
 610                                  fw->data + i,
 611                                  min(256U, (unsigned)(fw->size - i)));
 612                mb();
 613                readb(mgp->sram);
 614        }
 615        fw_readback = vmalloc(fw->size);
 616        if (!fw_readback) {
 617                status = -ENOMEM;
 618                goto abort_with_fw;
 619        }
 620        /* corruption checking is good for parity recovery and buggy chipset */
 621        memcpy_fromio(fw_readback, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
 622        reread_crc = crc32(~0, fw_readback, fw->size);
 623        vfree(fw_readback);
 624        if (crc != reread_crc) {
 625                dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
 626                        (unsigned)fw->size, reread_crc, crc);
 627                status = -EIO;
 628                goto abort_with_fw;
 629        }
 630        *size = (u32) fw->size;
 631
 632abort_with_fw:
 633        release_firmware(fw);
 634
 635abort_with_nothing:
 636        return status;
 637}
 638
 639static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
 640{
 641        struct mcp_gen_header *hdr;
 642        struct device *dev = &mgp->pdev->dev;
 643        const size_t bytes = sizeof(struct mcp_gen_header);
 644        size_t hdr_offset;
 645        int status;
 646
 647        /* find running firmware header */
 648        hdr_offset = swab32(readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
 649
 650        if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
 651                dev_err(dev, "Running firmware has bad header offset (%d)\n",
 652                        (int)hdr_offset);
 653                return -EIO;
 654        }
 655
 656        /* copy header of running firmware from SRAM to host memory to
 657         * validate firmware */
 658        hdr = kmalloc(bytes, GFP_KERNEL);
 659        if (hdr == NULL) {
 660                dev_err(dev, "could not malloc firmware hdr\n");
 661                return -ENOMEM;
 662        }
 663        memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
 664        status = myri10ge_validate_firmware(mgp, hdr);
 665        kfree(hdr);
 666
 667        /* check to see if adopted firmware has bug where adopting
 668         * it will cause broadcasts to be filtered unless the NIC
 669         * is kept in ALLMULTI mode */
 670        if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
 671            mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
 672                mgp->adopted_rx_filter_bug = 1;
 673                dev_warn(dev, "Adopting fw %d.%d.%d: "
 674                         "working around rx filter bug\n",
 675                         mgp->fw_ver_major, mgp->fw_ver_minor,
 676                         mgp->fw_ver_tiny);
 677        }
 678        return status;
 679}
 680
 681static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
 682{
 683        struct myri10ge_cmd cmd;
 684        int status;
 685
 686        /* probe for IPv6 TSO support */
 687        mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
 688        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
 689                                   &cmd, 0);
 690        if (status == 0) {
 691                mgp->max_tso6 = cmd.data0;
 692                mgp->features |= NETIF_F_TSO6;
 693        }
 694
 695        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
 696        if (status != 0) {
 697                dev_err(&mgp->pdev->dev,
 698                        "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
 699                return -ENXIO;
 700        }
 701
 702        mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
 703
 704        return 0;
 705}
 706
 707static int myri10ge_load_firmware(struct myri10ge_priv *mgp, int adopt)
 708{
 709        char __iomem *submit;
 710        __be32 buf[16] __attribute__ ((__aligned__(8)));
 711        u32 dma_low, dma_high, size;
 712        int status, i;
 713
 714        size = 0;
 715        status = myri10ge_load_hotplug_firmware(mgp, &size);
 716        if (status) {
 717                if (!adopt)
 718                        return status;
 719                dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
 720
 721                /* Do not attempt to adopt firmware if there
 722                 * was a bad crc */
 723                if (status == -EIO)
 724                        return status;
 725
 726                status = myri10ge_adopt_running_firmware(mgp);
 727                if (status != 0) {
 728                        dev_err(&mgp->pdev->dev,
 729                                "failed to adopt running firmware\n");
 730                        return status;
 731                }
 732                dev_info(&mgp->pdev->dev,
 733                         "Successfully adopted running firmware\n");
 734                if (mgp->tx_boundary == 4096) {
 735                        dev_warn(&mgp->pdev->dev,
 736                                 "Using firmware currently running on NIC"
 737                                 ".  For optimal\n");
 738                        dev_warn(&mgp->pdev->dev,
 739                                 "performance consider loading optimized "
 740                                 "firmware\n");
 741                        dev_warn(&mgp->pdev->dev, "via hotplug\n");
 742                }
 743
 744                mgp->fw_name = "adopted";
 745                mgp->tx_boundary = 2048;
 746                myri10ge_dummy_rdma(mgp, 1);
 747                status = myri10ge_get_firmware_capabilities(mgp);
 748                return status;
 749        }
 750
 751        /* clear confirmation addr */
 752        mgp->cmd->data = 0;
 753        mb();
 754
 755        /* send a reload command to the bootstrap MCP, and wait for the
 756         *  response in the confirmation address.  The firmware should
 757         * write a -1 there to indicate it is alive and well
 758         */
 759        dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
 760        dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
 761
 762        buf[0] = htonl(dma_high);       /* confirm addr MSW */
 763        buf[1] = htonl(dma_low);        /* confirm addr LSW */
 764        buf[2] = MYRI10GE_NO_CONFIRM_DATA;      /* confirm data */
 765
 766        /* FIX: All newest firmware should un-protect the bottom of
 767         * the sram before handoff. However, the very first interfaces
 768         * do not. Therefore the handoff copy must skip the first 8 bytes
 769         */
 770        buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
 771        buf[4] = htonl(size - 8);       /* length of code */
 772        buf[5] = htonl(8);      /* where to copy to */
 773        buf[6] = htonl(0);      /* where to jump to */
 774
 775        submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
 776
 777        myri10ge_pio_copy(submit, &buf, sizeof(buf));
 778        mb();
 779        msleep(1);
 780        mb();
 781        i = 0;
 782        while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
 783                msleep(1 << i);
 784                i++;
 785        }
 786        if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
 787                dev_err(&mgp->pdev->dev, "handoff failed\n");
 788                return -ENXIO;
 789        }
 790        myri10ge_dummy_rdma(mgp, 1);
 791        status = myri10ge_get_firmware_capabilities(mgp);
 792
 793        return status;
 794}
 795
 796static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
 797{
 798        struct myri10ge_cmd cmd;
 799        int status;
 800
 801        cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
 802                     | (addr[2] << 8) | addr[3]);
 803
 804        cmd.data1 = ((addr[4] << 8) | (addr[5]));
 805
 806        status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
 807        return status;
 808}
 809
 810static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
 811{
 812        struct myri10ge_cmd cmd;
 813        int status, ctl;
 814
 815        ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
 816        status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
 817
 818        if (status) {
 819                printk(KERN_ERR
 820                       "myri10ge: %s: Failed to set flow control mode\n",
 821                       mgp->dev->name);
 822                return status;
 823        }
 824        mgp->pause = pause;
 825        return 0;
 826}
 827
 828static void
 829myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
 830{
 831        struct myri10ge_cmd cmd;
 832        int status, ctl;
 833
 834        ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
 835        status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
 836        if (status)
 837                printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
 838                       mgp->dev->name);
 839}
 840
 841static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
 842{
 843        struct myri10ge_cmd cmd;
 844        int status;
 845        u32 len;
 846        struct page *dmatest_page;
 847        dma_addr_t dmatest_bus;
 848        char *test = " ";
 849
 850        dmatest_page = alloc_page(GFP_KERNEL);
 851        if (!dmatest_page)
 852                return -ENOMEM;
 853        dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
 854                                   DMA_BIDIRECTIONAL);
 855
 856        /* Run a small DMA test.
 857         * The magic multipliers to the length tell the firmware
 858         * to do DMA read, write, or read+write tests.  The
 859         * results are returned in cmd.data0.  The upper 16
 860         * bits or the return is the number of transfers completed.
 861         * The lower 16 bits is the time in 0.5us ticks that the
 862         * transfers took to complete.
 863         */
 864
 865        len = mgp->tx_boundary;
 866
 867        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 868        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 869        cmd.data2 = len * 0x10000;
 870        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 871        if (status != 0) {
 872                test = "read";
 873                goto abort;
 874        }
 875        mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 876        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 877        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 878        cmd.data2 = len * 0x1;
 879        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 880        if (status != 0) {
 881                test = "write";
 882                goto abort;
 883        }
 884        mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
 885
 886        cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
 887        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
 888        cmd.data2 = len * 0x10001;
 889        status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
 890        if (status != 0) {
 891                test = "read/write";
 892                goto abort;
 893        }
 894        mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
 895            (cmd.data0 & 0xffff);
 896
 897abort:
 898        pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
 899        put_page(dmatest_page);
 900
 901        if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
 902                dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
 903                         test, status);
 904
 905        return status;
 906}
 907
 908static int myri10ge_reset(struct myri10ge_priv *mgp)
 909{
 910        struct myri10ge_cmd cmd;
 911        struct myri10ge_slice_state *ss;
 912        int i, status;
 913        size_t bytes;
 914#ifdef CONFIG_MYRI10GE_DCA
 915        unsigned long dca_tag_off;
 916#endif
 917
 918        /* try to send a reset command to the card to see if it
 919         * is alive */
 920        memset(&cmd, 0, sizeof(cmd));
 921        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
 922        if (status != 0) {
 923                dev_err(&mgp->pdev->dev, "failed reset\n");
 924                return -ENXIO;
 925        }
 926
 927        (void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
 928        /*
 929         * Use non-ndis mcp_slot (eg, 4 bytes total,
 930         * no toeplitz hash value returned.  Older firmware will
 931         * not understand this command, but will use the correct
 932         * sized mcp_slot, so we ignore error returns
 933         */
 934        cmd.data0 = MXGEFW_RSS_MCP_SLOT_TYPE_MIN;
 935        (void)myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE, &cmd, 0);
 936
 937        /* Now exchange information about interrupts  */
 938
 939        bytes = mgp->max_intr_slots * sizeof(*mgp->ss[0].rx_done.entry);
 940        cmd.data0 = (u32) bytes;
 941        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
 942
 943        /*
 944         * Even though we already know how many slices are supported
 945         * via myri10ge_probe_slices() MXGEFW_CMD_GET_MAX_RSS_QUEUES
 946         * has magic side effects, and must be called after a reset.
 947         * It must be called prior to calling any RSS related cmds,
 948         * including assigning an interrupt queue for anything but
 949         * slice 0.  It must also be called *after*
 950         * MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
 951         * the firmware to compute offsets.
 952         */
 953
 954        if (mgp->num_slices > 1) {
 955
 956                /* ask the maximum number of slices it supports */
 957                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
 958                                           &cmd, 0);
 959                if (status != 0) {
 960                        dev_err(&mgp->pdev->dev,
 961                                "failed to get number of slices\n");
 962                }
 963
 964                /*
 965                 * MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
 966                 * to setting up the interrupt queue DMA
 967                 */
 968
 969                cmd.data0 = mgp->num_slices;
 970                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 971                if (mgp->dev->real_num_tx_queues > 1)
 972                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
 973                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
 974                                           &cmd, 0);
 975
 976                /* Firmware older than 1.4.32 only supports multiple
 977                 * RX queues, so if we get an error, first retry using a
 978                 * single TX queue before giving up */
 979                if (status != 0 && mgp->dev->real_num_tx_queues > 1) {
 980                        mgp->dev->real_num_tx_queues = 1;
 981                        cmd.data0 = mgp->num_slices;
 982                        cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
 983                        status = myri10ge_send_cmd(mgp,
 984                                                   MXGEFW_CMD_ENABLE_RSS_QUEUES,
 985                                                   &cmd, 0);
 986                }
 987
 988                if (status != 0) {
 989                        dev_err(&mgp->pdev->dev,
 990                                "failed to set number of slices\n");
 991
 992                        return status;
 993                }
 994        }
 995        for (i = 0; i < mgp->num_slices; i++) {
 996                ss = &mgp->ss[i];
 997                cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->rx_done.bus);
 998                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->rx_done.bus);
 999                cmd.data2 = i;
1000                status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA,
1001                                            &cmd, 0);
1002        };
1003
1004        status |=
1005            myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
1006        for (i = 0; i < mgp->num_slices; i++) {
1007                ss = &mgp->ss[i];
1008                ss->irq_claim =
1009                    (__iomem __be32 *) (mgp->sram + cmd.data0 + 8 * i);
1010        }
1011        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
1012                                    &cmd, 0);
1013        mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
1014
1015        status |= myri10ge_send_cmd
1016            (mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
1017        mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
1018        if (status != 0) {
1019                dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
1020                return status;
1021        }
1022        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1023
1024#ifdef CONFIG_MYRI10GE_DCA
1025        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_DCA_OFFSET, &cmd, 0);
1026        dca_tag_off = cmd.data0;
1027        for (i = 0; i < mgp->num_slices; i++) {
1028                ss = &mgp->ss[i];
1029                if (status == 0) {
1030                        ss->dca_tag = (__iomem __be32 *)
1031                            (mgp->sram + dca_tag_off + 4 * i);
1032                } else {
1033                        ss->dca_tag = NULL;
1034                }
1035        }
1036#endif                          /* CONFIG_MYRI10GE_DCA */
1037
1038        /* reset mcp/driver shared state back to 0 */
1039
1040        mgp->link_changes = 0;
1041        for (i = 0; i < mgp->num_slices; i++) {
1042                ss = &mgp->ss[i];
1043
1044                memset(ss->rx_done.entry, 0, bytes);
1045                ss->tx.req = 0;
1046                ss->tx.done = 0;
1047                ss->tx.pkt_start = 0;
1048                ss->tx.pkt_done = 0;
1049                ss->rx_big.cnt = 0;
1050                ss->rx_small.cnt = 0;
1051                ss->rx_done.idx = 0;
1052                ss->rx_done.cnt = 0;
1053                ss->tx.wake_queue = 0;
1054                ss->tx.stop_queue = 0;
1055        }
1056
1057        status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
1058        myri10ge_change_pause(mgp, mgp->pause);
1059        myri10ge_set_multicast_list(mgp->dev);
1060        return status;
1061}
1062
1063#ifdef CONFIG_MYRI10GE_DCA
1064static void
1065myri10ge_write_dca(struct myri10ge_slice_state *ss, int cpu, int tag)
1066{
1067        ss->cpu = cpu;
1068        ss->cached_dca_tag = tag;
1069        put_be32(htonl(tag), ss->dca_tag);
1070}
1071
1072static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)
1073{
1074        int cpu = get_cpu();
1075        int tag;
1076
1077        if (cpu != ss->cpu) {
1078                tag = dca_get_tag(cpu);
1079                if (ss->cached_dca_tag != tag)
1080                        myri10ge_write_dca(ss, cpu, tag);
1081        }
1082        put_cpu();
1083}
1084
1085static void myri10ge_setup_dca(struct myri10ge_priv *mgp)
1086{
1087        int err, i;
1088        struct pci_dev *pdev = mgp->pdev;
1089
1090        if (mgp->ss[0].dca_tag == NULL || mgp->dca_enabled)
1091                return;
1092        if (!myri10ge_dca) {
1093                dev_err(&pdev->dev, "dca disabled by administrator\n");
1094                return;
1095        }
1096        err = dca_add_requester(&pdev->dev);
1097        if (err) {
1098                if (err != -ENODEV)
1099                        dev_err(&pdev->dev,
1100                                "dca_add_requester() failed, err=%d\n", err);
1101                return;
1102        }
1103        mgp->dca_enabled = 1;
1104        for (i = 0; i < mgp->num_slices; i++)
1105                myri10ge_write_dca(&mgp->ss[i], -1, 0);
1106}
1107
1108static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)
1109{
1110        struct pci_dev *pdev = mgp->pdev;
1111        int err;
1112
1113        if (!mgp->dca_enabled)
1114                return;
1115        mgp->dca_enabled = 0;
1116        err = dca_remove_requester(&pdev->dev);
1117}
1118
1119static int myri10ge_notify_dca_device(struct device *dev, void *data)
1120{
1121        struct myri10ge_priv *mgp;
1122        unsigned long event;
1123
1124        mgp = dev_get_drvdata(dev);
1125        event = *(unsigned long *)data;
1126
1127        if (event == DCA_PROVIDER_ADD)
1128                myri10ge_setup_dca(mgp);
1129        else if (event == DCA_PROVIDER_REMOVE)
1130                myri10ge_teardown_dca(mgp);
1131        return 0;
1132}
1133#endif                          /* CONFIG_MYRI10GE_DCA */
1134
1135static inline void
1136myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
1137                    struct mcp_kreq_ether_recv *src)
1138{
1139        __be32 low;
1140
1141        low = src->addr_low;
1142        src->addr_low = htonl(DMA_BIT_MASK(32));
1143        myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
1144        mb();
1145        myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
1146        mb();
1147        src->addr_low = low;
1148        put_be32(low, &dst->addr_low);
1149        mb();
1150}
1151
1152static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
1153{
1154        struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
1155
1156        if ((skb->protocol == htons(ETH_P_8021Q)) &&
1157            (vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
1158             vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
1159                skb->csum = hw_csum;
1160                skb->ip_summed = CHECKSUM_COMPLETE;
1161        }
1162}
1163
1164static inline void
1165myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
1166                      struct skb_frag_struct *rx_frags, int len, int hlen)
1167{
1168        struct skb_frag_struct *skb_frags;
1169
1170        skb->len = skb->data_len = len;
1171        skb->truesize = len + sizeof(struct sk_buff);
1172        /* attach the page(s) */
1173
1174        skb_frags = skb_shinfo(skb)->frags;
1175        while (len > 0) {
1176                memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
1177                len -= rx_frags->size;
1178                skb_frags++;
1179                rx_frags++;
1180                skb_shinfo(skb)->nr_frags++;
1181        }
1182
1183        /* pskb_may_pull is not available in irq context, but
1184         * skb_pull() (for ether_pad and eth_type_trans()) requires
1185         * the beginning of the packet in skb_headlen(), move it
1186         * manually */
1187        skb_copy_to_linear_data(skb, va, hlen);
1188        skb_shinfo(skb)->frags[0].page_offset += hlen;
1189        skb_shinfo(skb)->frags[0].size -= hlen;
1190        skb->data_len -= hlen;
1191        skb->tail += hlen;
1192        skb_pull(skb, MXGEFW_PAD);
1193}
1194
1195static void
1196myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
1197                        int bytes, int watchdog)
1198{
1199        struct page *page;
1200        int idx;
1201
1202        if (unlikely(rx->watchdog_needed && !watchdog))
1203                return;
1204
1205        /* try to refill entire ring */
1206        while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
1207                idx = rx->fill_cnt & rx->mask;
1208                if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
1209                        /* we can use part of previous page */
1210                        get_page(rx->page);
1211                } else {
1212                        /* we need a new page */
1213                        page =
1214                            alloc_pages(GFP_ATOMIC | __GFP_COMP,
1215                                        MYRI10GE_ALLOC_ORDER);
1216                        if (unlikely(page == NULL)) {
1217                                if (rx->fill_cnt - rx->cnt < 16)
1218                                        rx->watchdog_needed = 1;
1219                                return;
1220                        }
1221                        rx->page = page;
1222                        rx->page_offset = 0;
1223                        rx->bus = pci_map_page(mgp->pdev, page, 0,
1224                                               MYRI10GE_ALLOC_SIZE,
1225                                               PCI_DMA_FROMDEVICE);
1226                }
1227                rx->info[idx].page = rx->page;
1228                rx->info[idx].page_offset = rx->page_offset;
1229                /* note that this is the address of the start of the
1230                 * page */
1231                pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
1232                rx->shadow[idx].addr_low =
1233                    htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
1234                rx->shadow[idx].addr_high =
1235                    htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
1236
1237                /* start next packet on a cacheline boundary */
1238                rx->page_offset += SKB_DATA_ALIGN(bytes);
1239
1240#if MYRI10GE_ALLOC_SIZE > 4096
1241                /* don't cross a 4KB boundary */
1242                if ((rx->page_offset >> 12) !=
1243                    ((rx->page_offset + bytes - 1) >> 12))
1244                        rx->page_offset = (rx->page_offset + 4096) & ~4095;
1245#endif
1246                rx->fill_cnt++;
1247
1248                /* copy 8 descriptors to the firmware at a time */
1249                if ((idx & 7) == 7) {
1250                        myri10ge_submit_8rx(&rx->lanai[idx - 7],
1251                                            &rx->shadow[idx - 7]);
1252                }
1253        }
1254}
1255
1256static inline void
1257myri10ge_unmap_rx_page(struct pci_dev *pdev,
1258                       struct myri10ge_rx_buffer_state *info, int bytes)
1259{
1260        /* unmap the recvd page if we're the only or last user of it */
1261        if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
1262            (info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
1263                pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
1264                                      & ~(MYRI10GE_ALLOC_SIZE - 1)),
1265                               MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
1266        }
1267}
1268
1269#define MYRI10GE_HLEN 64        /* The number of bytes to copy from a
1270                                 * page into an skb */
1271
1272static inline int
1273myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
1274                 int bytes, int len, __wsum csum)
1275{
1276        struct myri10ge_priv *mgp = ss->mgp;
1277        struct sk_buff *skb;
1278        struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
1279        int i, idx, hlen, remainder;
1280        struct pci_dev *pdev = mgp->pdev;
1281        struct net_device *dev = mgp->dev;
1282        u8 *va;
1283
1284        len += MXGEFW_PAD;
1285        idx = rx->cnt & rx->mask;
1286        va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
1287        prefetch(va);
1288        /* Fill skb_frag_struct(s) with data from our receive */
1289        for (i = 0, remainder = len; remainder > 0; i++) {
1290                myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
1291                rx_frags[i].page = rx->info[idx].page;
1292                rx_frags[i].page_offset = rx->info[idx].page_offset;
1293                if (remainder < MYRI10GE_ALLOC_SIZE)
1294                        rx_frags[i].size = remainder;
1295                else
1296                        rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
1297                rx->cnt++;
1298                idx = rx->cnt & rx->mask;
1299                remainder -= MYRI10GE_ALLOC_SIZE;
1300        }
1301
1302        if (dev->features & NETIF_F_LRO) {
1303                rx_frags[0].page_offset += MXGEFW_PAD;
1304                rx_frags[0].size -= MXGEFW_PAD;
1305                len -= MXGEFW_PAD;
1306                lro_receive_frags(&ss->rx_done.lro_mgr, rx_frags,
1307                                  /* opaque, will come back in get_frag_header */
1308                                  len, len,
1309                                  (void *)(__force unsigned long)csum, csum);
1310
1311                return 1;
1312        }
1313
1314        hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
1315
1316        /* allocate an skb to attach the page(s) to. This is done
1317         * after trying LRO, so as to avoid skb allocation overheads */
1318
1319        skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
1320        if (unlikely(skb == NULL)) {
1321                ss->stats.rx_dropped++;
1322                do {
1323                        i--;
1324                        put_page(rx_frags[i].page);
1325                } while (i != 0);
1326                return 0;
1327        }
1328
1329        /* Attach the pages to the skb, and trim off any padding */
1330        myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
1331        if (skb_shinfo(skb)->frags[0].size <= 0) {
1332                put_page(skb_shinfo(skb)->frags[0].page);
1333                skb_shinfo(skb)->nr_frags = 0;
1334        }
1335        skb->protocol = eth_type_trans(skb, dev);
1336        skb_record_rx_queue(skb, ss - &mgp->ss[0]);
1337
1338        if (mgp->csum_flag) {
1339                if ((skb->protocol == htons(ETH_P_IP)) ||
1340                    (skb->protocol == htons(ETH_P_IPV6))) {
1341                        skb->csum = csum;
1342                        skb->ip_summed = CHECKSUM_COMPLETE;
1343                } else
1344                        myri10ge_vlan_ip_csum(skb, csum);
1345        }
1346        netif_receive_skb(skb);
1347        return 1;
1348}
1349
1350static inline void
1351myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
1352{
1353        struct pci_dev *pdev = ss->mgp->pdev;
1354        struct myri10ge_tx_buf *tx = &ss->tx;
1355        struct netdev_queue *dev_queue;
1356        struct sk_buff *skb;
1357        int idx, len;
1358
1359        while (tx->pkt_done != mcp_index) {
1360                idx = tx->done & tx->mask;
1361                skb = tx->info[idx].skb;
1362
1363                /* Mark as free */
1364                tx->info[idx].skb = NULL;
1365                if (tx->info[idx].last) {
1366                        tx->pkt_done++;
1367                        tx->info[idx].last = 0;
1368                }
1369                tx->done++;
1370                len = pci_unmap_len(&tx->info[idx], len);
1371                pci_unmap_len_set(&tx->info[idx], len, 0);
1372                if (skb) {
1373                        ss->stats.tx_bytes += skb->len;
1374                        ss->stats.tx_packets++;
1375                        dev_kfree_skb_irq(skb);
1376                        if (len)
1377                                pci_unmap_single(pdev,
1378                                                 pci_unmap_addr(&tx->info[idx],
1379                                                                bus), len,
1380                                                 PCI_DMA_TODEVICE);
1381                } else {
1382                        if (len)
1383                                pci_unmap_page(pdev,
1384                                               pci_unmap_addr(&tx->info[idx],
1385                                                              bus), len,
1386                                               PCI_DMA_TODEVICE);
1387                }
1388        }
1389
1390        dev_queue = netdev_get_tx_queue(ss->dev, ss - ss->mgp->ss);
1391        /*
1392         * Make a minimal effort to prevent the NIC from polling an
1393         * idle tx queue.  If we can't get the lock we leave the queue
1394         * active. In this case, either a thread was about to start
1395         * using the queue anyway, or we lost a race and the NIC will
1396         * waste some of its resources polling an inactive queue for a
1397         * while.
1398         */
1399
1400        if ((ss->mgp->dev->real_num_tx_queues > 1) &&
1401            __netif_tx_trylock(dev_queue)) {
1402                if (tx->req == tx->done) {
1403                        tx->queue_active = 0;
1404                        put_be32(htonl(1), tx->send_stop);
1405                        mb();
1406                        mmiowb();
1407                }
1408                __netif_tx_unlock(dev_queue);
1409        }
1410
1411        /* start the queue if we've stopped it */
1412        if (netif_tx_queue_stopped(dev_queue)
1413            && tx->req - tx->done < (tx->mask >> 1)) {
1414                tx->wake_queue++;
1415                netif_tx_wake_queue(dev_queue);
1416        }
1417}
1418
1419static inline int
1420myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
1421{
1422        struct myri10ge_rx_done *rx_done = &ss->rx_done;
1423        struct myri10ge_priv *mgp = ss->mgp;
1424        struct net_device *netdev = mgp->dev;
1425        unsigned long rx_bytes = 0;
1426        unsigned long rx_packets = 0;
1427        unsigned long rx_ok;
1428
1429        int idx = rx_done->idx;
1430        int cnt = rx_done->cnt;
1431        int work_done = 0;
1432        u16 length;
1433        __wsum checksum;
1434
1435        while (rx_done->entry[idx].length != 0 && work_done < budget) {
1436                length = ntohs(rx_done->entry[idx].length);
1437                rx_done->entry[idx].length = 0;
1438                checksum = csum_unfold(rx_done->entry[idx].checksum);
1439                if (length <= mgp->small_bytes)
1440                        rx_ok = myri10ge_rx_done(ss, &ss->rx_small,
1441                                                 mgp->small_bytes,
1442                                                 length, checksum);
1443                else
1444                        rx_ok = myri10ge_rx_done(ss, &ss->rx_big,
1445                                                 mgp->big_bytes,
1446                                                 length, checksum);
1447                rx_packets += rx_ok;
1448                rx_bytes += rx_ok * (unsigned long)length;
1449                cnt++;
1450                idx = cnt & (mgp->max_intr_slots - 1);
1451                work_done++;
1452        }
1453        rx_done->idx = idx;
1454        rx_done->cnt = cnt;
1455        ss->stats.rx_packets += rx_packets;
1456        ss->stats.rx_bytes += rx_bytes;
1457
1458        if (netdev->features & NETIF_F_LRO)
1459                lro_flush_all(&rx_done->lro_mgr);
1460
1461        /* restock receive rings if needed */
1462        if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
1463                myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
1464                                        mgp->small_bytes + MXGEFW_PAD, 0);
1465        if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
1466                myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
1467
1468        return work_done;
1469}
1470
1471static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
1472{
1473        struct mcp_irq_data *stats = mgp->ss[0].fw_stats;
1474
1475        if (unlikely(stats->stats_updated)) {
1476                unsigned link_up = ntohl(stats->link_up);
1477                if (mgp->link_state != link_up) {
1478                        mgp->link_state = link_up;
1479
1480                        if (mgp->link_state == MXGEFW_LINK_UP) {
1481                                if (netif_msg_link(mgp))
1482                                        printk(KERN_INFO
1483                                               "myri10ge: %s: link up\n",
1484                                               mgp->dev->name);
1485                                netif_carrier_on(mgp->dev);
1486                                mgp->link_changes++;
1487                        } else {
1488                                if (netif_msg_link(mgp))
1489                                        printk(KERN_INFO
1490                                               "myri10ge: %s: link %s\n",
1491                                               mgp->dev->name,
1492                                               (link_up == MXGEFW_LINK_MYRINET ?
1493                                                "mismatch (Myrinet detected)" :
1494                                                "down"));
1495                                netif_carrier_off(mgp->dev);
1496                                mgp->link_changes++;
1497                        }
1498                }
1499                if (mgp->rdma_tags_available !=
1500                    ntohl(stats->rdma_tags_available)) {
1501                        mgp->rdma_tags_available =
1502                            ntohl(stats->rdma_tags_available);
1503                        printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
1504                               "%d tags left\n", mgp->dev->name,
1505                               mgp->rdma_tags_available);
1506                }
1507                mgp->down_cnt += stats->link_down;
1508                if (stats->link_down)
1509                        wake_up(&mgp->down_wq);
1510        }
1511}
1512
1513static int myri10ge_poll(struct napi_struct *napi, int budget)
1514{
1515        struct myri10ge_slice_state *ss =
1516            container_of(napi, struct myri10ge_slice_state, napi);
1517        int work_done;
1518
1519#ifdef CONFIG_MYRI10GE_DCA
1520        if (ss->mgp->dca_enabled)
1521                myri10ge_update_dca(ss);
1522#endif
1523
1524        /* process as many rx events as NAPI will allow */
1525        work_done = myri10ge_clean_rx_done(ss, budget);
1526
1527        if (work_done < budget) {
1528                napi_complete(napi);
1529                put_be32(htonl(3), ss->irq_claim);
1530        }
1531        return work_done;
1532}
1533
1534static irqreturn_t myri10ge_intr(int irq, void *arg)
1535{
1536        struct myri10ge_slice_state *ss = arg;
1537        struct myri10ge_priv *mgp = ss->mgp;
1538        struct mcp_irq_data *stats = ss->fw_stats;
1539        struct myri10ge_tx_buf *tx = &ss->tx;
1540        u32 send_done_count;
1541        int i;
1542
1543        /* an interrupt on a non-zero receive-only slice is implicitly
1544         * valid  since MSI-X irqs are not shared */
1545        if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
1546                napi_schedule(&ss->napi);
1547                return (IRQ_HANDLED);
1548        }
1549
1550        /* make sure it is our IRQ, and that the DMA has finished */
1551        if (unlikely(!stats->valid))
1552                return (IRQ_NONE);
1553
1554        /* low bit indicates receives are present, so schedule
1555         * napi poll handler */
1556        if (stats->valid & 1)
1557                napi_schedule(&ss->napi);
1558
1559        if (!mgp->msi_enabled && !mgp->msix_enabled) {
1560                put_be32(0, mgp->irq_deassert);
1561                if (!myri10ge_deassert_wait)
1562                        stats->valid = 0;
1563                mb();
1564        } else
1565                stats->valid = 0;
1566
1567        /* Wait for IRQ line to go low, if using INTx */
1568        i = 0;
1569        while (1) {
1570                i++;
1571                /* check for transmit completes and receives */
1572                send_done_count = ntohl(stats->send_done_count);
1573                if (send_done_count != tx->pkt_done)
1574                        myri10ge_tx_done(ss, (int)send_done_count);
1575                if (unlikely(i > myri10ge_max_irq_loops)) {
1576                        printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
1577                               mgp->dev->name);
1578                        stats->valid = 0;
1579                        schedule_work(&mgp->watchdog_work);
1580                }
1581                if (likely(stats->valid == 0))
1582                        break;
1583                cpu_relax();
1584                barrier();
1585        }
1586
1587        /* Only slice 0 updates stats */
1588        if (ss == mgp->ss)
1589                myri10ge_check_statblock(mgp);
1590
1591        put_be32(htonl(3), ss->irq_claim + 1);
1592        return (IRQ_HANDLED);
1593}
1594
1595static int
1596myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
1597{
1598        struct myri10ge_priv *mgp = netdev_priv(netdev);
1599        char *ptr;
1600        int i;
1601
1602        cmd->autoneg = AUTONEG_DISABLE;
1603        cmd->speed = SPEED_10000;
1604        cmd->duplex = DUPLEX_FULL;
1605
1606        /*
1607         * parse the product code to deterimine the interface type
1608         * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
1609         * after the 3rd dash in the driver's cached copy of the
1610         * EEPROM's product code string.
1611         */
1612        ptr = mgp->product_code_string;
1613        if (ptr == NULL) {
1614                printk(KERN_ERR "myri10ge: %s: Missing product code\n",
1615                       netdev->name);
1616                return 0;
1617        }
1618        for (i = 0; i < 3; i++, ptr++) {
1619                ptr = strchr(ptr, '-');
1620                if (ptr == NULL) {
1621                        printk(KERN_ERR "myri10ge: %s: Invalid product "
1622                               "code %s\n", netdev->name,
1623                               mgp->product_code_string);
1624                        return 0;
1625                }
1626        }
1627        if (*ptr == '2')
1628                ptr++;
1629        if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
1630                /* We've found either an XFP, quad ribbon fiber, or SFP+ */
1631                cmd->port = PORT_FIBRE;
1632                cmd->supported |= SUPPORTED_FIBRE;
1633                cmd->advertising |= ADVERTISED_FIBRE;
1634        } else {
1635                cmd->port = PORT_OTHER;
1636        }
1637        if (*ptr == 'R' || *ptr == 'S')
1638                cmd->transceiver = XCVR_EXTERNAL;
1639        else
1640                cmd->transceiver = XCVR_INTERNAL;
1641
1642        return 0;
1643}
1644
1645static void
1646myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
1647{
1648        struct myri10ge_priv *mgp = netdev_priv(netdev);
1649
1650        strlcpy(info->driver, "myri10ge", sizeof(info->driver));
1651        strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
1652        strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
1653        strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
1654}
1655
1656static int
1657myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1658{
1659        struct myri10ge_priv *mgp = netdev_priv(netdev);
1660
1661        coal->rx_coalesce_usecs = mgp->intr_coal_delay;
1662        return 0;
1663}
1664
1665static int
1666myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
1667{
1668        struct myri10ge_priv *mgp = netdev_priv(netdev);
1669
1670        mgp->intr_coal_delay = coal->rx_coalesce_usecs;
1671        put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
1672        return 0;
1673}
1674
1675static void
1676myri10ge_get_pauseparam(struct net_device *netdev,
1677                        struct ethtool_pauseparam *pause)
1678{
1679        struct myri10ge_priv *mgp = netdev_priv(netdev);
1680
1681        pause->autoneg = 0;
1682        pause->rx_pause = mgp->pause;
1683        pause->tx_pause = mgp->pause;
1684}
1685
1686static int
1687myri10ge_set_pauseparam(struct net_device *netdev,
1688                        struct ethtool_pauseparam *pause)
1689{
1690        struct myri10ge_priv *mgp = netdev_priv(netdev);
1691
1692        if (pause->tx_pause != mgp->pause)
1693                return myri10ge_change_pause(mgp, pause->tx_pause);
1694        if (pause->rx_pause != mgp->pause)
1695                return myri10ge_change_pause(mgp, pause->tx_pause);
1696        if (pause->autoneg != 0)
1697                return -EINVAL;
1698        return 0;
1699}
1700
1701static void
1702myri10ge_get_ringparam(struct net_device *netdev,
1703                       struct ethtool_ringparam *ring)
1704{
1705        struct myri10ge_priv *mgp = netdev_priv(netdev);
1706
1707        ring->rx_mini_max_pending = mgp->ss[0].rx_small.mask + 1;
1708        ring->rx_max_pending = mgp->ss[0].rx_big.mask + 1;
1709        ring->rx_jumbo_max_pending = 0;
1710        ring->tx_max_pending = mgp->ss[0].tx.mask + 1;
1711        ring->rx_mini_pending = ring->rx_mini_max_pending;
1712        ring->rx_pending = ring->rx_max_pending;
1713        ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
1714        ring->tx_pending = ring->tx_max_pending;
1715}
1716
1717static u32 myri10ge_get_rx_csum(struct net_device *netdev)
1718{
1719        struct myri10ge_priv *mgp = netdev_priv(netdev);
1720
1721        if (mgp->csum_flag)
1722                return 1;
1723        else
1724                return 0;
1725}
1726
1727static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
1728{
1729        struct myri10ge_priv *mgp = netdev_priv(netdev);
1730        int err = 0;
1731
1732        if (csum_enabled)
1733                mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
1734        else {
1735                u32 flags = ethtool_op_get_flags(netdev);
1736                err = ethtool_op_set_flags(netdev, (flags & ~ETH_FLAG_LRO));
1737                mgp->csum_flag = 0;
1738
1739        }
1740        return err;
1741}
1742
1743static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
1744{
1745        struct myri10ge_priv *mgp = netdev_priv(netdev);
1746        unsigned long flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
1747
1748        if (tso_enabled)
1749                netdev->features |= flags;
1750        else
1751                netdev->features &= ~flags;
1752        return 0;
1753}
1754
1755static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
1756        "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
1757        "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
1758        "rx_length_errors", "rx_over_errors", "rx_crc_errors",
1759        "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
1760        "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
1761        "tx_heartbeat_errors", "tx_window_errors",
1762        /* device-specific stats */
1763        "tx_boundary", "WC", "irq", "MSI", "MSIX",
1764        "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
1765        "serial_number", "watchdog_resets",
1766#ifdef CONFIG_MYRI10GE_DCA
1767        "dca_capable_firmware", "dca_device_present",
1768#endif
1769        "link_changes", "link_up", "dropped_link_overflow",
1770        "dropped_link_error_or_filtered",
1771        "dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
1772        "dropped_unicast_filtered", "dropped_multicast_filtered",
1773        "dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
1774        "dropped_no_big_buffer"
1775};
1776
1777static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
1778        "----------- slice ---------",
1779        "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
1780        "rx_small_cnt", "rx_big_cnt",
1781        "wake_queue", "stop_queue", "tx_linearized", "LRO aggregated",
1782            "LRO flushed",
1783        "LRO avg aggr", "LRO no_desc"
1784};
1785
1786#define MYRI10GE_NET_STATS_LEN      21
1787#define MYRI10GE_MAIN_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_main_stats)
1788#define MYRI10GE_SLICE_STATS_LEN  ARRAY_SIZE(myri10ge_gstrings_slice_stats)
1789
1790static void
1791myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
1792{
1793        struct myri10ge_priv *mgp = netdev_priv(netdev);
1794        int i;
1795
1796        switch (stringset) {
1797        case ETH_SS_STATS:
1798                memcpy(data, *myri10ge_gstrings_main_stats,
1799                       sizeof(myri10ge_gstrings_main_stats));
1800                data += sizeof(myri10ge_gstrings_main_stats);
1801                for (i = 0; i < mgp->num_slices; i++) {
1802                        memcpy(data, *myri10ge_gstrings_slice_stats,
1803                               sizeof(myri10ge_gstrings_slice_stats));
1804                        data += sizeof(myri10ge_gstrings_slice_stats);
1805                }
1806                break;
1807        }
1808}
1809
1810static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
1811{
1812        struct myri10ge_priv *mgp = netdev_priv(netdev);
1813
1814        switch (sset) {
1815        case ETH_SS_STATS:
1816                return MYRI10GE_MAIN_STATS_LEN +
1817                    mgp->num_slices * MYRI10GE_SLICE_STATS_LEN;
1818        default:
1819                return -EOPNOTSUPP;
1820        }
1821}
1822
1823static void
1824myri10ge_get_ethtool_stats(struct net_device *netdev,
1825                           struct ethtool_stats *stats, u64 * data)
1826{
1827        struct myri10ge_priv *mgp = netdev_priv(netdev);
1828        struct myri10ge_slice_state *ss;
1829        int slice;
1830        int i;
1831
1832        /* force stats update */
1833        (void)myri10ge_get_stats(netdev);
1834        for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
1835                data[i] = ((unsigned long *)&mgp->stats)[i];
1836
1837        data[i++] = (unsigned int)mgp->tx_boundary;
1838        data[i++] = (unsigned int)mgp->wc_enabled;
1839        data[i++] = (unsigned int)mgp->pdev->irq;
1840        data[i++] = (unsigned int)mgp->msi_enabled;
1841        data[i++] = (unsigned int)mgp->msix_enabled;
1842        data[i++] = (unsigned int)mgp->read_dma;
1843        data[i++] = (unsigned int)mgp->write_dma;
1844        data[i++] = (unsigned int)mgp->read_write_dma;
1845        data[i++] = (unsigned int)mgp->serial_number;
1846        data[i++] = (unsigned int)mgp->watchdog_resets;
1847#ifdef CONFIG_MYRI10GE_DCA
1848        data[i++] = (unsigned int)(mgp->ss[0].dca_tag != NULL);
1849        data[i++] = (unsigned int)(mgp->dca_enabled);
1850#endif
1851        data[i++] = (unsigned int)mgp->link_changes;
1852
1853        /* firmware stats are useful only in the first slice */
1854        ss = &mgp->ss[0];
1855        data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
1856        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
1857        data[i++] =
1858            (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
1859        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
1860        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
1861        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
1862        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
1863        data[i++] =
1864            (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
1865        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
1866        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
1867        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
1868        data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
1869
1870        for (slice = 0; slice < mgp->num_slices; slice++) {
1871                ss = &mgp->ss[slice];
1872                data[i++] = slice;
1873                data[i++] = (unsigned int)ss->tx.pkt_start;
1874                data[i++] = (unsigned int)ss->tx.pkt_done;
1875                data[i++] = (unsigned int)ss->tx.req;
1876                data[i++] = (unsigned int)ss->tx.done;
1877                data[i++] = (unsigned int)ss->rx_small.cnt;
1878                data[i++] = (unsigned int)ss->rx_big.cnt;
1879                data[i++] = (unsigned int)ss->tx.wake_queue;
1880                data[i++] = (unsigned int)ss->tx.stop_queue;
1881                data[i++] = (unsigned int)ss->tx.linearized;
1882                data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
1883                data[i++] = ss->rx_done.lro_mgr.stats.flushed;
1884                if (ss->rx_done.lro_mgr.stats.flushed)
1885                        data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
1886                            ss->rx_done.lro_mgr.stats.flushed;
1887                else
1888                        data[i++] = 0;
1889                data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
1890        }
1891}
1892
1893static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
1894{
1895        struct myri10ge_priv *mgp = netdev_priv(netdev);
1896        mgp->msg_enable = value;
1897}
1898
1899static u32 myri10ge_get_msglevel(struct net_device *netdev)
1900{
1901        struct myri10ge_priv *mgp = netdev_priv(netdev);
1902        return mgp->msg_enable;
1903}
1904
1905static const struct ethtool_ops myri10ge_ethtool_ops = {
1906        .get_settings = myri10ge_get_settings,
1907        .get_drvinfo = myri10ge_get_drvinfo,
1908        .get_coalesce = myri10ge_get_coalesce,
1909        .set_coalesce = myri10ge_set_coalesce,
1910        .get_pauseparam = myri10ge_get_pauseparam,
1911        .set_pauseparam = myri10ge_set_pauseparam,
1912        .get_ringparam = myri10ge_get_ringparam,
1913        .get_rx_csum = myri10ge_get_rx_csum,
1914        .set_rx_csum = myri10ge_set_rx_csum,
1915        .set_tx_csum = ethtool_op_set_tx_hw_csum,
1916        .set_sg = ethtool_op_set_sg,
1917        .set_tso = myri10ge_set_tso,
1918        .get_link = ethtool_op_get_link,
1919        .get_strings = myri10ge_get_strings,
1920        .get_sset_count = myri10ge_get_sset_count,
1921        .get_ethtool_stats = myri10ge_get_ethtool_stats,
1922        .set_msglevel = myri10ge_set_msglevel,
1923        .get_msglevel = myri10ge_get_msglevel,
1924        .get_flags = ethtool_op_get_flags,
1925        .set_flags = ethtool_op_set_flags
1926};
1927
1928static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
1929{
1930        struct myri10ge_priv *mgp = ss->mgp;
1931        struct myri10ge_cmd cmd;
1932        struct net_device *dev = mgp->dev;
1933        int tx_ring_size, rx_ring_size;
1934        int tx_ring_entries, rx_ring_entries;
1935        int i, slice, status;
1936        size_t bytes;
1937
1938        /* get ring sizes */
1939        slice = ss - mgp->ss;
1940        cmd.data0 = slice;
1941        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
1942        tx_ring_size = cmd.data0;
1943        cmd.data0 = slice;
1944        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
1945        if (status != 0)
1946                return status;
1947        rx_ring_size = cmd.data0;
1948
1949        tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
1950        rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
1951        ss->tx.mask = tx_ring_entries - 1;
1952        ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
1953
1954        status = -ENOMEM;
1955
1956        /* allocate the host shadow rings */
1957
1958        bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
1959            * sizeof(*ss->tx.req_list);
1960        ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
1961        if (ss->tx.req_bytes == NULL)
1962                goto abort_with_nothing;
1963
1964        /* ensure req_list entries are aligned to 8 bytes */
1965        ss->tx.req_list = (struct mcp_kreq_ether_send *)
1966            ALIGN((unsigned long)ss->tx.req_bytes, 8);
1967        ss->tx.queue_active = 0;
1968
1969        bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
1970        ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
1971        if (ss->rx_small.shadow == NULL)
1972                goto abort_with_tx_req_bytes;
1973
1974        bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
1975        ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
1976        if (ss->rx_big.shadow == NULL)
1977                goto abort_with_rx_small_shadow;
1978
1979        /* allocate the host info rings */
1980
1981        bytes = tx_ring_entries * sizeof(*ss->tx.info);
1982        ss->tx.info = kzalloc(bytes, GFP_KERNEL);
1983        if (ss->tx.info == NULL)
1984                goto abort_with_rx_big_shadow;
1985
1986        bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
1987        ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
1988        if (ss->rx_small.info == NULL)
1989                goto abort_with_tx_info;
1990
1991        bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
1992        ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
1993        if (ss->rx_big.info == NULL)
1994                goto abort_with_rx_small_info;
1995
1996        /* Fill the receive rings */
1997        ss->rx_big.cnt = 0;
1998        ss->rx_small.cnt = 0;
1999        ss->rx_big.fill_cnt = 0;
2000        ss->rx_small.fill_cnt = 0;
2001        ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
2002        ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
2003        ss->rx_small.watchdog_needed = 0;
2004        ss->rx_big.watchdog_needed = 0;
2005        myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
2006                                mgp->small_bytes + MXGEFW_PAD, 0);
2007
2008        if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
2009                printk(KERN_ERR
2010                       "myri10ge: %s:slice-%d: alloced only %d small bufs\n",
2011                       dev->name, slice, ss->rx_small.fill_cnt);
2012                goto abort_with_rx_small_ring;
2013        }
2014
2015        myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
2016        if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
2017                printk(KERN_ERR
2018                       "myri10ge: %s:slice-%d: alloced only %d big bufs\n",
2019                       dev->name, slice, ss->rx_big.fill_cnt);
2020                goto abort_with_rx_big_ring;
2021        }
2022
2023        return 0;
2024
2025abort_with_rx_big_ring:
2026        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2027                int idx = i & ss->rx_big.mask;
2028                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2029                                       mgp->big_bytes);
2030                put_page(ss->rx_big.info[idx].page);
2031        }
2032
2033abort_with_rx_small_ring:
2034        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2035                int idx = i & ss->rx_small.mask;
2036                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2037                                       mgp->small_bytes + MXGEFW_PAD);
2038                put_page(ss->rx_small.info[idx].page);
2039        }
2040
2041        kfree(ss->rx_big.info);
2042
2043abort_with_rx_small_info:
2044        kfree(ss->rx_small.info);
2045
2046abort_with_tx_info:
2047        kfree(ss->tx.info);
2048
2049abort_with_rx_big_shadow:
2050        kfree(ss->rx_big.shadow);
2051
2052abort_with_rx_small_shadow:
2053        kfree(ss->rx_small.shadow);
2054
2055abort_with_tx_req_bytes:
2056        kfree(ss->tx.req_bytes);
2057        ss->tx.req_bytes = NULL;
2058        ss->tx.req_list = NULL;
2059
2060abort_with_nothing:
2061        return status;
2062}
2063
2064static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
2065{
2066        struct myri10ge_priv *mgp = ss->mgp;
2067        struct sk_buff *skb;
2068        struct myri10ge_tx_buf *tx;
2069        int i, len, idx;
2070
2071        /* If not allocated, skip it */
2072        if (ss->tx.req_list == NULL)
2073                return;
2074
2075        for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
2076                idx = i & ss->rx_big.mask;
2077                if (i == ss->rx_big.fill_cnt - 1)
2078                        ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
2079                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
2080                                       mgp->big_bytes);
2081                put_page(ss->rx_big.info[idx].page);
2082        }
2083
2084        for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
2085                idx = i & ss->rx_small.mask;
2086                if (i == ss->rx_small.fill_cnt - 1)
2087                        ss->rx_small.info[idx].page_offset =
2088                            MYRI10GE_ALLOC_SIZE;
2089                myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
2090                                       mgp->small_bytes + MXGEFW_PAD);
2091                put_page(ss->rx_small.info[idx].page);
2092        }
2093        tx = &ss->tx;
2094        while (tx->done != tx->req) {
2095                idx = tx->done & tx->mask;
2096                skb = tx->info[idx].skb;
2097
2098                /* Mark as free */
2099                tx->info[idx].skb = NULL;
2100                tx->done++;
2101                len = pci_unmap_len(&tx->info[idx], len);
2102                pci_unmap_len_set(&tx->info[idx], len, 0);
2103                if (skb) {
2104                        ss->stats.tx_dropped++;
2105                        dev_kfree_skb_any(skb);
2106                        if (len)
2107                                pci_unmap_single(mgp->pdev,
2108                                                 pci_unmap_addr(&tx->info[idx],
2109                                                                bus), len,
2110                                                 PCI_DMA_TODEVICE);
2111                } else {
2112                        if (len)
2113                                pci_unmap_page(mgp->pdev,
2114                                               pci_unmap_addr(&tx->info[idx],
2115                                                              bus), len,
2116                                               PCI_DMA_TODEVICE);
2117                }
2118        }
2119        kfree(ss->rx_big.info);
2120
2121        kfree(ss->rx_small.info);
2122
2123        kfree(ss->tx.info);
2124
2125        kfree(ss->rx_big.shadow);
2126
2127        kfree(ss->rx_small.shadow);
2128
2129        kfree(ss->tx.req_bytes);
2130        ss->tx.req_bytes = NULL;
2131        ss->tx.req_list = NULL;
2132}
2133
2134static int myri10ge_request_irq(struct myri10ge_priv *mgp)
2135{
2136        struct pci_dev *pdev = mgp->pdev;
2137        struct myri10ge_slice_state *ss;
2138        struct net_device *netdev = mgp->dev;
2139        int i;
2140        int status;
2141
2142        mgp->msi_enabled = 0;
2143        mgp->msix_enabled = 0;
2144        status = 0;
2145        if (myri10ge_msi) {
2146                if (mgp->num_slices > 1) {
2147                        status =
2148                            pci_enable_msix(pdev, mgp->msix_vectors,
2149                                            mgp->num_slices);
2150                        if (status == 0) {
2151                                mgp->msix_enabled = 1;
2152                        } else {
2153                                dev_err(&pdev->dev,
2154                                        "Error %d setting up MSI-X\n", status);
2155                                return status;
2156                        }
2157                }
2158                if (mgp->msix_enabled == 0) {
2159                        status = pci_enable_msi(pdev);
2160                        if (status != 0) {
2161                                dev_err(&pdev->dev,
2162                                        "Error %d setting up MSI; falling back to xPIC\n",
2163                                        status);
2164                        } else {
2165                                mgp->msi_enabled = 1;
2166                        }
2167                }
2168        }
2169        if (mgp->msix_enabled) {
2170                for (i = 0; i < mgp->num_slices; i++) {
2171                        ss = &mgp->ss[i];
2172                        snprintf(ss->irq_desc, sizeof(ss->irq_desc),
2173                                 "%s:slice-%d", netdev->name, i);
2174                        status = request_irq(mgp->msix_vectors[i].vector,
2175                                             myri10ge_intr, 0, ss->irq_desc,
2176                                             ss);
2177                        if (status != 0) {
2178                                dev_err(&pdev->dev,
2179                                        "slice %d failed to allocate IRQ\n", i);
2180                                i--;
2181                                while (i >= 0) {
2182                                        free_irq(mgp->msix_vectors[i].vector,
2183                                                 &mgp->ss[i]);
2184                                        i--;
2185                                }
2186                                pci_disable_msix(pdev);
2187                                return status;
2188                        }
2189                }
2190        } else {
2191                status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
2192                                     mgp->dev->name, &mgp->ss[0]);
2193                if (status != 0) {
2194                        dev_err(&pdev->dev, "failed to allocate IRQ\n");
2195                        if (mgp->msi_enabled)
2196                                pci_disable_msi(pdev);
2197                }
2198        }
2199        return status;
2200}
2201
2202static void myri10ge_free_irq(struct myri10ge_priv *mgp)
2203{
2204        struct pci_dev *pdev = mgp->pdev;
2205        int i;
2206
2207        if (mgp->msix_enabled) {
2208                for (i = 0; i < mgp->num_slices; i++)
2209                        free_irq(mgp->msix_vectors[i].vector, &mgp->ss[i]);
2210        } else {
2211                free_irq(pdev->irq, &mgp->ss[0]);
2212        }
2213        if (mgp->msi_enabled)
2214                pci_disable_msi(pdev);
2215        if (mgp->msix_enabled)
2216                pci_disable_msix(pdev);
2217}
2218
2219static int
2220myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
2221                         void **ip_hdr, void **tcpudp_hdr,
2222                         u64 * hdr_flags, void *priv)
2223{
2224        struct ethhdr *eh;
2225        struct vlan_ethhdr *veh;
2226        struct iphdr *iph;
2227        u8 *va = page_address(frag->page) + frag->page_offset;
2228        unsigned long ll_hlen;
2229        /* passed opaque through lro_receive_frags() */
2230        __wsum csum = (__force __wsum) (unsigned long)priv;
2231
2232        /* find the mac header, aborting if not IPv4 */
2233
2234        eh = (struct ethhdr *)va;
2235        *mac_hdr = eh;
2236        ll_hlen = ETH_HLEN;
2237        if (eh->h_proto != htons(ETH_P_IP)) {
2238                if (eh->h_proto == htons(ETH_P_8021Q)) {
2239                        veh = (struct vlan_ethhdr *)va;
2240                        if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
2241                                return -1;
2242
2243                        ll_hlen += VLAN_HLEN;
2244
2245                        /*
2246                         *  HW checksum starts ETH_HLEN bytes into
2247                         *  frame, so we must subtract off the VLAN
2248                         *  header's checksum before csum can be used
2249                         */
2250                        csum = csum_sub(csum, csum_partial(va + ETH_HLEN,
2251                                                           VLAN_HLEN, 0));
2252                } else {
2253                        return -1;
2254                }
2255        }
2256        *hdr_flags = LRO_IPV4;
2257
2258        iph = (struct iphdr *)(va + ll_hlen);
2259        *ip_hdr = iph;
2260        if (iph->protocol != IPPROTO_TCP)
2261                return -1;
2262        if (iph->frag_off & htons(IP_MF | IP_OFFSET))
2263                return -1;
2264        *hdr_flags |= LRO_TCP;
2265        *tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
2266
2267        /* verify the IP checksum */
2268        if (unlikely(ip_fast_csum((u8 *) iph, iph->ihl)))
2269                return -1;
2270
2271        /* verify the  checksum */
2272        if (unlikely(csum_tcpudp_magic(iph->saddr, iph->daddr,
2273                                       ntohs(iph->tot_len) - (iph->ihl << 2),
2274                                       IPPROTO_TCP, csum)))
2275                return -1;
2276
2277        return 0;
2278}
2279
2280static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
2281{
2282        struct myri10ge_cmd cmd;
2283        struct myri10ge_slice_state *ss;
2284        int status;
2285
2286        ss = &mgp->ss[slice];
2287        status = 0;
2288        if (slice == 0 || (mgp->dev->real_num_tx_queues > 1)) {
2289                cmd.data0 = slice;
2290                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET,
2291                                           &cmd, 0);
2292                ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
2293                    (mgp->sram + cmd.data0);
2294        }
2295        cmd.data0 = slice;
2296        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
2297                                    &cmd, 0);
2298        ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
2299            (mgp->sram + cmd.data0);
2300
2301        cmd.data0 = slice;
2302        status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
2303        ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
2304            (mgp->sram + cmd.data0);
2305
2306        ss->tx.send_go = (__iomem __be32 *)
2307            (mgp->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
2308        ss->tx.send_stop = (__iomem __be32 *)
2309            (mgp->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
2310        return status;
2311
2312}
2313
2314static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
2315{
2316        struct myri10ge_cmd cmd;
2317        struct myri10ge_slice_state *ss;
2318        int status;
2319
2320        ss = &mgp->ss[slice];
2321        cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
2322        cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
2323        cmd.data2 = sizeof(struct mcp_irq_data) | (slice << 16);
2324        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
2325        if (status == -ENOSYS) {
2326                dma_addr_t bus = ss->fw_stats_bus;
2327                if (slice != 0)
2328                        return -EINVAL;
2329                bus += offsetof(struct mcp_irq_data, send_done_count);
2330                cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
2331                cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
2332                status = myri10ge_send_cmd(mgp,
2333                                           MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
2334                                           &cmd, 0);
2335                /* Firmware cannot support multicast without STATS_DMA_V2 */
2336                mgp->fw_multicast_support = 0;
2337        } else {
2338                mgp->fw_multicast_support = 1;
2339        }
2340        return 0;
2341}
2342
2343static int myri10ge_open(struct net_device *dev)
2344{
2345        struct myri10ge_slice_state *ss;
2346        struct myri10ge_priv *mgp = netdev_priv(dev);
2347        struct myri10ge_cmd cmd;
2348        int i, status, big_pow2, slice;
2349        u8 *itable;
2350        struct net_lro_mgr *lro_mgr;
2351
2352        if (mgp->running != MYRI10GE_ETH_STOPPED)
2353                return -EBUSY;
2354
2355        mgp->running = MYRI10GE_ETH_STARTING;
2356        status = myri10ge_reset(mgp);
2357        if (status != 0) {
2358                printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
2359                goto abort_with_nothing;
2360        }
2361
2362        if (mgp->num_slices > 1) {
2363                cmd.data0 = mgp->num_slices;
2364                cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
2365                if (mgp->dev->real_num_tx_queues > 1)
2366                        cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
2367                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
2368                                           &cmd, 0);
2369                if (status != 0) {
2370                        printk(KERN_ERR
2371                               "myri10ge: %s: failed to set number of slices\n",
2372                               dev->name);
2373                        goto abort_with_nothing;
2374                }
2375                /* setup the indirection table */
2376                cmd.data0 = mgp->num_slices;
2377                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
2378                                           &cmd, 0);
2379
2380                status |= myri10ge_send_cmd(mgp,
2381                                            MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
2382                                            &cmd, 0);
2383                if (status != 0) {
2384                        printk(KERN_ERR
2385                               "myri10ge: %s: failed to setup rss tables\n",
2386                               dev->name);
2387                        goto abort_with_nothing;
2388                }
2389
2390                /* just enable an identity mapping */
2391                itable = mgp->sram + cmd.data0;
2392                for (i = 0; i < mgp->num_slices; i++)
2393                        __raw_writeb(i, &itable[i]);
2394
2395                cmd.data0 = 1;
2396                cmd.data1 = myri10ge_rss_hash;
2397                status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
2398                                           &cmd, 0);
2399                if (status != 0) {
2400                        printk(KERN_ERR
2401                               "myri10ge: %s: failed to enable slices\n",
2402                               dev->name);
2403                        goto abort_with_nothing;
2404                }
2405        }
2406
2407        status = myri10ge_request_irq(mgp);
2408        if (status != 0)
2409                goto abort_with_nothing;
2410
2411        /* decide what small buffer size to use.  For good TCP rx
2412         * performance, it is important to not receive 1514 byte
2413         * frames into jumbo buffers, as it confuses the socket buffer
2414         * accounting code, leading to drops and erratic performance.
2415         */
2416
2417        if (dev->mtu <= ETH_DATA_LEN)
2418                /* enough for a TCP header */
2419                mgp->small_bytes = (128 > SMP_CACHE_BYTES)
2420                    ? (128 - MXGEFW_PAD)
2421                    : (SMP_CACHE_BYTES - MXGEFW_PAD);
2422        else
2423                /* enough for a vlan encapsulated ETH_DATA_LEN frame */
2424                mgp->small_bytes = VLAN_ETH_FRAME_LEN;
2425
2426        /* Override the small buffer size? */
2427        if (myri10ge_small_bytes > 0)
2428                mgp->small_bytes = myri10ge_small_bytes;
2429
2430        /* Firmware needs the big buff size as a power of 2.  Lie and
2431         * tell him the buffer is larger, because we only use 1
2432         * buffer/pkt, and the mtu will prevent overruns.
2433         */
2434        big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2435        if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
2436                while (!is_power_of_2(big_pow2))
2437                        big_pow2++;
2438                mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
2439        } else {
2440                big_pow2 = MYRI10GE_ALLOC_SIZE;
2441                mgp->big_bytes = big_pow2;
2442        }
2443
2444        /* setup the per-slice data structures */
2445        for (slice = 0; slice < mgp->num_slices; slice++) {
2446                ss = &mgp->ss[slice];
2447
2448                status = myri10ge_get_txrx(mgp, slice);
2449                if (status != 0) {
2450                        printk(KERN_ERR
2451                               "myri10ge: %s: failed to get ring sizes or locations\n",
2452                               dev->name);
2453                        goto abort_with_rings;
2454                }
2455                status = myri10ge_allocate_rings(ss);
2456                if (status != 0)
2457                        goto abort_with_rings;
2458
2459                /* only firmware which supports multiple TX queues
2460                 * supports setting up the tx stats on non-zero
2461                 * slices */
2462                if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
2463                        status = myri10ge_set_stats(mgp, slice);
2464                if (status) {
2465                        printk(KERN_ERR
2466                               "myri10ge: %s: Couldn't set stats DMA\n",
2467                               dev->name);
2468                        goto abort_with_rings;
2469                }
2470
2471                lro_mgr = &ss->rx_done.lro_mgr;
2472                lro_mgr->dev = dev;
2473                lro_mgr->features = LRO_F_NAPI;
2474                lro_mgr->ip_summed = CHECKSUM_COMPLETE;
2475                lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
2476                lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
2477                lro_mgr->lro_arr = ss->rx_done.lro_desc;
2478                lro_mgr->get_frag_header = myri10ge_get_frag_header;
2479                lro_mgr->max_aggr = myri10ge_lro_max_pkts;
2480                lro_mgr->frag_align_pad = 2;
2481                if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
2482                        lro_mgr->max_aggr = MAX_SKB_FRAGS;
2483
2484                /* must happen prior to any irq */
2485                napi_enable(&(ss)->napi);
2486        }
2487
2488        /* now give firmware buffers sizes, and MTU */
2489        cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
2490        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
2491        cmd.data0 = mgp->small_bytes;
2492        status |=
2493            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
2494        cmd.data0 = big_pow2;
2495        status |=
2496            myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
2497        if (status) {
2498                printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
2499                       dev->name);
2500                goto abort_with_rings;
2501        }
2502
2503        /*
2504         * Set Linux style TSO mode; this is needed only on newer
2505         *  firmware versions.  Older versions default to Linux
2506         *  style TSO
2507         */
2508        cmd.data0 = 0;
2509        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
2510        if (status && status != -ENOSYS) {
2511                printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
2512                       dev->name);
2513                goto abort_with_rings;
2514        }
2515
2516        mgp->link_state = ~0U;
2517        mgp->rdma_tags_available = 15;
2518
2519        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
2520        if (status) {
2521                printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
2522                       dev->name);
2523                goto abort_with_rings;
2524        }
2525
2526        mgp->running = MYRI10GE_ETH_RUNNING;
2527        mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
2528        add_timer(&mgp->watchdog_timer);
2529        netif_tx_wake_all_queues(dev);
2530
2531        return 0;
2532
2533abort_with_rings:
2534        while (slice) {
2535                slice--;
2536                napi_disable(&mgp->ss[slice].napi);
2537        }
2538        for (i = 0; i < mgp->num_slices; i++)
2539                myri10ge_free_rings(&mgp->ss[i]);
2540
2541        myri10ge_free_irq(mgp);
2542
2543abort_with_nothing:
2544        mgp->running = MYRI10GE_ETH_STOPPED;
2545        return -ENOMEM;
2546}
2547
2548static int myri10ge_close(struct net_device *dev)
2549{
2550        struct myri10ge_priv *mgp = netdev_priv(dev);
2551        struct myri10ge_cmd cmd;
2552        int status, old_down_cnt;
2553        int i;
2554
2555        if (mgp->running != MYRI10GE_ETH_RUNNING)
2556                return 0;
2557
2558        if (mgp->ss[0].tx.req_bytes == NULL)
2559                return 0;
2560
2561        del_timer_sync(&mgp->watchdog_timer);
2562        mgp->running = MYRI10GE_ETH_STOPPING;
2563        for (i = 0; i < mgp->num_slices; i++) {
2564                napi_disable(&mgp->ss[i].napi);
2565        }
2566        netif_carrier_off(dev);
2567
2568        netif_tx_stop_all_queues(dev);
2569        if (mgp->rebooted == 0) {
2570                old_down_cnt = mgp->down_cnt;
2571                mb();
2572                status =
2573                    myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
2574                if (status)
2575                        printk(KERN_ERR
2576                               "myri10ge: %s: Couldn't bring down link\n",
2577                               dev->name);
2578
2579                wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
2580                                   HZ);
2581                if (old_down_cnt == mgp->down_cnt)
2582                        printk(KERN_ERR "myri10ge: %s never got down irq\n",
2583                               dev->name);
2584        }
2585        netif_tx_disable(dev);
2586        myri10ge_free_irq(mgp);
2587        for (i = 0; i < mgp->num_slices; i++)
2588                myri10ge_free_rings(&mgp->ss[i]);
2589
2590        mgp->running = MYRI10GE_ETH_STOPPED;
2591        return 0;
2592}
2593
2594/* copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2595 * backwards one at a time and handle ring wraps */
2596
2597static inline void
2598myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
2599                              struct mcp_kreq_ether_send *src, int cnt)
2600{
2601        int idx, starting_slot;
2602        starting_slot = tx->req;
2603        while (cnt > 1) {
2604                cnt--;
2605                idx = (starting_slot + cnt) & tx->mask;
2606                myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
2607                mb();
2608        }
2609}
2610
2611/*
2612 * copy an array of struct mcp_kreq_ether_send's to the mcp.  Copy
2613 * at most 32 bytes at a time, so as to avoid involving the software
2614 * pio handler in the nic.   We re-write the first segment's flags
2615 * to mark them valid only after writing the entire chain.
2616 */
2617
2618static inline void
2619myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
2620                    int cnt)
2621{
2622        int idx, i;
2623        struct mcp_kreq_ether_send __iomem *dstp, *dst;
2624        struct mcp_kreq_ether_send *srcp;
2625        u8 last_flags;
2626
2627        idx = tx->req & tx->mask;
2628
2629        last_flags = src->flags;
2630        src->flags = 0;
2631        mb();
2632        dst = dstp = &tx->lanai[idx];
2633        srcp = src;
2634
2635        if ((idx + cnt) < tx->mask) {
2636                for (i = 0; i < (cnt - 1); i += 2) {
2637                        myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
2638                        mb();   /* force write every 32 bytes */
2639                        srcp += 2;
2640                        dstp += 2;
2641                }
2642        } else {
2643                /* submit all but the first request, and ensure
2644                 * that it is submitted below */
2645                myri10ge_submit_req_backwards(tx, src, cnt);
2646                i = 0;
2647        }
2648        if (i < cnt) {
2649                /* submit the first request */
2650                myri10ge_pio_copy(dstp, srcp, sizeof(*src));
2651                mb();           /* barrier before setting valid flag */
2652        }
2653
2654        /* re-write the last 32-bits with the valid flags */
2655        src->flags = last_flags;
2656        put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
2657        tx->req += cnt;
2658        mb();
2659}
2660
2661/*
2662 * Transmit a packet.  We need to split the packet so that a single
2663 * segment does not cross myri10ge->tx_boundary, so this makes segment
2664 * counting tricky.  So rather than try to count segments up front, we
2665 * just give up if there are too few segments to hold a reasonably
2666 * fragmented packet currently available.  If we run
2667 * out of segments while preparing a packet for DMA, we just linearize
2668 * it and try again.
2669 */
2670
2671static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
2672                                       struct net_device *dev)
2673{
2674        struct myri10ge_priv *mgp = netdev_priv(dev);
2675        struct myri10ge_slice_state *ss;
2676        struct mcp_kreq_ether_send *req;
2677        struct myri10ge_tx_buf *tx;
2678        struct skb_frag_struct *frag;
2679        struct netdev_queue *netdev_queue;
2680        dma_addr_t bus;
2681        u32 low;
2682        __be32 high_swapped;
2683        unsigned int len;
2684        int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
2685        u16 pseudo_hdr_offset, cksum_offset, queue;
2686        int cum_len, seglen, boundary, rdma_count;
2687        u8 flags, odd_flag;
2688
2689        queue = skb_get_queue_mapping(skb);
2690        ss = &mgp->ss[queue];
2691        netdev_queue = netdev_get_tx_queue(mgp->dev, queue);
2692        tx = &ss->tx;
2693
2694again:
2695        req = tx->req_list;
2696        avail = tx->mask - 1 - (tx->req - tx->done);
2697
2698        mss = 0;
2699        max_segments = MXGEFW_MAX_SEND_DESC;
2700
2701        if (skb_is_gso(skb)) {
2702                mss = skb_shinfo(skb)->gso_size;
2703                max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
2704        }
2705
2706        if ((unlikely(avail < max_segments))) {
2707                /* we are out of transmit resources */
2708                tx->stop_queue++;
2709                netif_tx_stop_queue(netdev_queue);
2710                return NETDEV_TX_BUSY;
2711        }
2712
2713        /* Setup checksum offloading, if needed */
2714        cksum_offset = 0;
2715        pseudo_hdr_offset = 0;
2716        odd_flag = 0;
2717        flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
2718        if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2719                cksum_offset = skb_transport_offset(skb);
2720                pseudo_hdr_offset = cksum_offset + skb->csum_offset;
2721                /* If the headers are excessively large, then we must
2722                 * fall back to a software checksum */
2723                if (unlikely(!mss && (cksum_offset > 255 ||
2724                                      pseudo_hdr_offset > 127))) {
2725                        if (skb_checksum_help(skb))
2726                                goto drop;
2727                        cksum_offset = 0;
2728                        pseudo_hdr_offset = 0;
2729                } else {
2730                        odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
2731                        flags |= MXGEFW_FLAGS_CKSUM;
2732                }
2733        }
2734
2735        cum_len = 0;
2736
2737        if (mss) {              /* TSO */
2738                /* this removes any CKSUM flag from before */
2739                flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
2740
2741                /* negative cum_len signifies to the
2742                 * send loop that we are still in the
2743                 * header portion of the TSO packet.
2744                 * TSO header can be at most 1KB long */
2745                cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
2746
2747                /* for IPv6 TSO, the checksum offset stores the
2748                 * TCP header length, to save the firmware from
2749                 * the need to parse the headers */
2750                if (skb_is_gso_v6(skb)) {
2751                        cksum_offset = tcp_hdrlen(skb);
2752                        /* Can only handle headers <= max_tso6 long */
2753                        if (unlikely(-cum_len > mgp->max_tso6))
2754                                return myri10ge_sw_tso(skb, dev);
2755                }
2756                /* for TSO, pseudo_hdr_offset holds mss.
2757                 * The firmware figures out where to put
2758                 * the checksum by parsing the header. */
2759                pseudo_hdr_offset = mss;
2760        } else
2761                /* Mark small packets, and pad out tiny packets */
2762        if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
2763                flags |= MXGEFW_FLAGS_SMALL;
2764
2765                /* pad frames to at least ETH_ZLEN bytes */
2766                if (unlikely(skb->len < ETH_ZLEN)) {
2767                        if (skb_padto(skb, ETH_ZLEN)) {
2768                                /* The packet is gone, so we must
2769                                 * return 0 */
2770                                ss->stats.tx_dropped += 1;
2771                                return NETDEV_TX_OK;
2772                        }
2773                        /* adjust the len to account for the zero pad
2774                         * so that the nic can know how long it is */
2775                        skb->len = ETH_ZLEN;
2776                }
2777        }
2778
2779        /* map the skb for DMA */
2780        len = skb->len - skb->data_len;
2781        idx = tx->req & tx->mask;
2782        tx->info[idx].skb = skb;
2783        bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
2784        pci_unmap_addr_set(&tx->info[idx], bus, bus);
2785        pci_unmap_len_set(&tx->info[idx], len, len);
2786
2787        frag_cnt = skb_shinfo(skb)->nr_frags;
2788        frag_idx = 0;
2789        count = 0;
2790        rdma_count = 0;
2791
2792        /* "rdma_count" is the number of RDMAs belonging to the
2793         * current packet BEFORE the current send request. For
2794         * non-TSO packets, this is equal to "count".
2795         * For TSO packets, rdma_count needs to be reset
2796         * to 0 after a segment cut.
2797         *
2798         * The rdma_count field of the send request is
2799         * the number of RDMAs of the packet starting at
2800         * that request. For TSO send requests with one ore more cuts
2801         * in the middle, this is the number of RDMAs starting
2802         * after the last cut in the request. All previous
2803         * segments before the last cut implicitly have 1 RDMA.
2804         *
2805         * Since the number of RDMAs is not known beforehand,
2806         * it must be filled-in retroactively - after each
2807         * segmentation cut or at the end of the entire packet.
2808         */
2809
2810        while (1) {
2811                /* Break the SKB or Fragment up into pieces which
2812                 * do not cross mgp->tx_boundary */
2813                low = MYRI10GE_LOWPART_TO_U32(bus);
2814                high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
2815                while (len) {
2816                        u8 flags_next;
2817                        int cum_len_next;
2818
2819                        if (unlikely(count == max_segments))
2820                                goto abort_linearize;
2821
2822                        boundary =
2823                            (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
2824                        seglen = boundary - low;
2825                        if (seglen > len)
2826                                seglen = len;
2827                        flags_next = flags & ~MXGEFW_FLAGS_FIRST;
2828                        cum_len_next = cum_len + seglen;
2829                        if (mss) {      /* TSO */
2830                                (req - rdma_count)->rdma_count = rdma_count + 1;
2831
2832                                if (likely(cum_len >= 0)) {     /* payload */
2833                                        int next_is_first, chop;
2834
2835                                        chop = (cum_len_next > mss);
2836                                        cum_len_next = cum_len_next % mss;
2837                                        next_is_first = (cum_len_next == 0);
2838                                        flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
2839                                        flags_next |= next_is_first *
2840                                            MXGEFW_FLAGS_FIRST;
2841                                        rdma_count |= -(chop | next_is_first);
2842                                        rdma_count += chop & !next_is_first;
2843                                } else if (likely(cum_len_next >= 0)) { /* header ends */
2844                                        int small;
2845
2846                                        rdma_count = -1;
2847                                        cum_len_next = 0;
2848                                        seglen = -cum_len;
2849                                        small = (mss <= MXGEFW_SEND_SMALL_SIZE);
2850                                        flags_next = MXGEFW_FLAGS_TSO_PLD |
2851                                            MXGEFW_FLAGS_FIRST |
2852                                            (small * MXGEFW_FLAGS_SMALL);
2853                                }
2854                        }
2855                        req->addr_high = high_swapped;
2856                        req->addr_low = htonl(low);
2857                        req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
2858                        req->pad = 0;   /* complete solid 16-byte block; does this matter? */
2859                        req->rdma_count = 1;
2860                        req->length = htons(seglen);
2861                        req->cksum_offset = cksum_offset;
2862                        req->flags = flags | ((cum_len & 1) * odd_flag);
2863
2864                        low += seglen;
2865                        len -= seglen;
2866                        cum_len = cum_len_next;
2867                        flags = flags_next;
2868                        req++;
2869                        count++;
2870                        rdma_count++;
2871                        if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
2872                                if (unlikely(cksum_offset > seglen))
2873                                        cksum_offset -= seglen;
2874                                else
2875                                        cksum_offset = 0;
2876                        }
2877                }
2878                if (frag_idx == frag_cnt)
2879                        break;
2880
2881                /* map next fragment for DMA */
2882                idx = (count + tx->req) & tx->mask;
2883                frag = &skb_shinfo(skb)->frags[frag_idx];
2884                frag_idx++;
2885                len = frag->size;
2886                bus = pci_map_page(mgp->pdev, frag->page, frag->page_offset,
2887                                   len, PCI_DMA_TODEVICE);
2888                pci_unmap_addr_set(&tx->info[idx], bus, bus);
2889                pci_unmap_len_set(&tx->info[idx], len, len);
2890        }
2891
2892        (req - rdma_count)->rdma_count = rdma_count;
2893        if (mss)
2894                do {
2895                        req--;
2896                        req->flags |= MXGEFW_FLAGS_TSO_LAST;
2897                } while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
2898                                         MXGEFW_FLAGS_FIRST)));
2899        idx = ((count - 1) + tx->req) & tx->mask;
2900        tx->info[idx].last = 1;
2901        myri10ge_submit_req(tx, tx->req_list, count);
2902        /* if using multiple tx queues, make sure NIC polls the
2903         * current slice */
2904        if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) {
2905                tx->queue_active = 1;
2906                put_be32(htonl(1), tx->send_go);
2907                mb();
2908                mmiowb();
2909        }
2910        tx->pkt_start++;
2911        if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
2912                tx->stop_queue++;
2913                netif_tx_stop_queue(netdev_queue);
2914        }
2915        return NETDEV_TX_OK;
2916
2917abort_linearize:
2918        /* Free any DMA resources we've alloced and clear out the skb
2919         * slot so as to not trip up assertions, and to avoid a
2920         * double-free if linearizing fails */
2921
2922        last_idx = (idx + 1) & tx->mask;
2923        idx = tx->req & tx->mask;
2924        tx->info[idx].skb = NULL;
2925        do {
2926                len = pci_unmap_len(&tx->info[idx], len);
2927                if (len) {
2928                        if (tx->info[idx].skb != NULL)
2929                                pci_unmap_single(mgp->pdev,
2930                                                 pci_unmap_addr(&tx->info[idx],
2931                                                                bus), len,
2932                                                 PCI_DMA_TODEVICE);
2933                        else
2934                                pci_unmap_page(mgp->pdev,
2935                                               pci_unmap_addr(&tx->info[idx],
2936                                                              bus), len,
2937                                               PCI_DMA_TODEVICE);
2938                        pci_unmap_len_set(&tx->info[idx], len, 0);
2939                        tx->info[idx].skb = NULL;
2940                }
2941                idx = (idx + 1) & tx->mask;
2942        } while (idx != last_idx);
2943        if (skb_is_gso(skb)) {
2944                printk(KERN_ERR
2945                       "myri10ge: %s: TSO but wanted to linearize?!?!?\n",
2946                       mgp->dev->name);
2947                goto drop;
2948        }
2949
2950        if (skb_linearize(skb))
2951                goto drop;
2952
2953        tx->linearized++;
2954        goto again;
2955
2956drop:
2957        dev_kfree_skb_any(skb);
2958        ss->stats.tx_dropped += 1;
2959        return NETDEV_TX_OK;
2960
2961}
2962
2963static netdev_tx_t myri10ge_sw_tso(struct sk_buff *skb,
2964                                         struct net_device *dev)
2965{
2966        struct sk_buff *segs, *curr;
2967        struct myri10ge_priv *mgp = netdev_priv(dev);
2968        struct myri10ge_slice_state *ss;
2969        netdev_tx_t status;
2970
2971        segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
2972        if (IS_ERR(segs))
2973                goto drop;
2974
2975        while (segs) {
2976                curr = segs;
2977                segs = segs->next;
2978                curr->next = NULL;
2979                status = myri10ge_xmit(curr, dev);
2980                if (status != 0) {
2981                        dev_kfree_skb_any(curr);
2982                        if (segs != NULL) {
2983                                curr = segs;
2984                                segs = segs->next;
2985                                curr->next = NULL;
2986                                dev_kfree_skb_any(segs);
2987                        }
2988                        goto drop;
2989                }
2990        }
2991        dev_kfree_skb_any(skb);
2992        return NETDEV_TX_OK;
2993
2994drop:
2995        ss = &mgp->ss[skb_get_queue_mapping(skb)];
2996        dev_kfree_skb_any(skb);
2997        ss->stats.tx_dropped += 1;
2998        return NETDEV_TX_OK;
2999}
3000
3001static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
3002{
3003        struct myri10ge_priv *mgp = netdev_priv(dev);
3004        struct myri10ge_slice_netstats *slice_stats;
3005        struct net_device_stats *stats = &mgp->stats;
3006        int i;
3007
3008        spin_lock(&mgp->stats_lock);
3009        memset(stats, 0, sizeof(*stats));
3010        for (i = 0; i < mgp->num_slices; i++) {
3011                slice_stats = &mgp->ss[i].stats;
3012                stats->rx_packets += slice_stats->rx_packets;
3013                stats->tx_packets += slice_stats->tx_packets;
3014                stats->rx_bytes += slice_stats->rx_bytes;
3015                stats->tx_bytes += slice_stats->tx_bytes;
3016                stats->rx_dropped += slice_stats->rx_dropped;
3017                stats->tx_dropped += slice_stats->tx_dropped;
3018        }
3019        spin_unlock(&mgp->stats_lock);
3020        return stats;
3021}
3022
3023static void myri10ge_set_multicast_list(struct net_device *dev)
3024{
3025        struct myri10ge_priv *mgp = netdev_priv(dev);
3026        struct myri10ge_cmd cmd;
3027        struct dev_mc_list *mc_list;
3028        __be32 data[2] = { 0, 0 };
3029        int err;
3030
3031        /* can be called from atomic contexts,
3032         * pass 1 to force atomicity in myri10ge_send_cmd() */
3033        myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
3034
3035        /* This firmware is known to not support multicast */
3036        if (!mgp->fw_multicast_support)
3037                return;
3038
3039        /* Disable multicast filtering */
3040
3041        err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
3042        if (err != 0) {
3043                printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
3044                       " error status: %d\n", dev->name, err);
3045                goto abort;
3046        }
3047
3048        if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
3049                /* request to disable multicast filtering, so quit here */
3050                return;
3051        }
3052
3053        /* Flush the filters */
3054
3055        err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
3056                                &cmd, 1);
3057        if (err != 0) {
3058                printk(KERN_ERR
3059                       "myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
3060                       ", error status: %d\n", dev->name, err);
3061                goto abort;
3062        }
3063
3064        /* Walk the multicast list, and add each address */
3065        for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
3066                memcpy(data, &mc_list->dmi_addr, 6);
3067                cmd.data0 = ntohl(data[0]);
3068                cmd.data1 = ntohl(data[1]);
3069                err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
3070                                        &cmd, 1);
3071
3072                if (err != 0) {
3073                        printk(KERN_ERR "myri10ge: %s: Failed "
3074                               "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
3075                               "%d\t", dev->name, err);
3076                        printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
3077                        goto abort;
3078                }
3079        }
3080        /* Enable multicast filtering */
3081        err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
3082        if (err != 0) {
3083                printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
3084                       "error status: %d\n", dev->name, err);
3085                goto abort;
3086        }
3087
3088        return;
3089
3090abort:
3091        return;
3092}
3093
3094static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
3095{
3096        struct sockaddr *sa = addr;
3097        struct myri10ge_priv *mgp = netdev_priv(dev);
3098        int status;
3099
3100        if (!is_valid_ether_addr(sa->sa_data))
3101                return -EADDRNOTAVAIL;
3102
3103        status = myri10ge_update_mac_address(mgp, sa->sa_data);
3104        if (status != 0) {
3105                printk(KERN_ERR
3106                       "myri10ge: %s: changing mac address failed with %d\n",
3107                       dev->name, status);
3108                return status;
3109        }
3110
3111        /* change the dev structure */
3112        memcpy(dev->dev_addr, sa->sa_data, 6);
3113        return 0;
3114}
3115
3116static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
3117{
3118        struct myri10ge_priv *mgp = netdev_priv(dev);
3119        int error = 0;
3120
3121        if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
3122                printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
3123                       dev->name, new_mtu);
3124                return -EINVAL;
3125        }
3126        printk(KERN_INFO "%s: changing mtu from %d to %d\n",
3127               dev->name, dev->mtu, new_mtu);
3128        if (mgp->running) {
3129                /* if we change the mtu on an active device, we must
3130                 * reset the device so the firmware sees the change */
3131                myri10ge_close(dev);
3132                dev->mtu = new_mtu;
3133                myri10ge_open(dev);
3134        } else
3135                dev->mtu = new_mtu;
3136
3137        return error;
3138}
3139
3140/*
3141 * Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
3142 * Only do it if the bridge is a root port since we don't want to disturb
3143 * any other device, except if forced with myri10ge_ecrc_enable > 1.
3144 */
3145
3146static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
3147{
3148        struct pci_dev *bridge = mgp->pdev->bus->self;
3149        struct device *dev = &mgp->pdev->dev;
3150        unsigned cap;
3151        unsigned err_cap;
3152        u16 val;
3153        u8 ext_type;
3154        int ret;
3155
3156        if (!myri10ge_ecrc_enable || !bridge)
3157                return;
3158
3159        /* check that the bridge is a root port */
3160        cap = pci_find_capability(bridge, PCI_CAP_ID_EXP);
3161        pci_read_config_word(bridge, cap + PCI_CAP_FLAGS, &val);
3162        ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
3163        if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
3164                if (myri10ge_ecrc_enable > 1) {
3165                        struct pci_dev *prev_bridge, *old_bridge = bridge;
3166
3167                        /* Walk the hierarchy up to the root port
3168                         * where ECRC has to be enabled */
3169                        do {
3170                                prev_bridge = bridge;
3171                                bridge = bridge->bus->self;
3172                                if (!bridge || prev_bridge == bridge) {
3173                                        dev_err(dev,
3174                                                "Failed to find root port"
3175                                                " to force ECRC\n");
3176                                        return;
3177                                }
3178                                cap =
3179                                    pci_find_capability(bridge, PCI_CAP_ID_EXP);
3180                                pci_read_config_word(bridge,
3181                                                     cap + PCI_CAP_FLAGS, &val);
3182                                ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
3183                        } while (ext_type != PCI_EXP_TYPE_ROOT_PORT);
3184
3185                        dev_info(dev,
3186                                 "Forcing ECRC on non-root port %s"
3187                                 " (enabling on root port %s)\n",
3188                                 pci_name(old_bridge), pci_name(bridge));
3189                } else {
3190                        dev_err(dev,
3191                                "Not enabling ECRC on non-root port %s\n",
3192                                pci_name(bridge));
3193                        return;
3194                }
3195        }
3196
3197        cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
3198        if (!cap)
3199                return;
3200
3201        ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
3202        if (ret) {
3203                dev_err(dev, "failed reading ext-conf-space of %s\n",
3204                        pci_name(bridge));
3205                dev_err(dev, "\t pci=nommconf in use? "
3206                        "or buggy/incomplete/absent ACPI MCFG attr?\n");
3207                return;
3208        }
3209        if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
3210                return;
3211
3212        err_cap |= PCI_ERR_CAP_ECRC_GENE;
3213        pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
3214        dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
3215}
3216
3217/*
3218 * The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
3219 * when the PCI-E Completion packets are aligned on an 8-byte
3220 * boundary.  Some PCI-E chip sets always align Completion packets; on
3221 * the ones that do not, the alignment can be enforced by enabling
3222 * ECRC generation (if supported).
3223 *
3224 * When PCI-E Completion packets are not aligned, it is actually more
3225 * efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
3226 *
3227 * If the driver can neither enable ECRC nor verify that it has
3228 * already been enabled, then it must use a firmware image which works
3229 * around unaligned completion packets (myri10ge_rss_ethp_z8e.dat), and it
3230 * should also ensure that it never gives the device a Read-DMA which is
3231 * larger than 2KB by setting the tx_boundary to 2KB.  If ECRC is
3232 * enabled, then the driver should use the aligned (myri10ge_rss_eth_z8e.dat)
3233 * firmware image, and set tx_boundary to 4KB.
3234 */
3235
3236static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
3237{
3238        struct pci_dev *pdev = mgp->pdev;
3239        struct device *dev = &pdev->dev;
3240        int status;
3241
3242        mgp->tx_boundary = 4096;
3243        /*
3244         * Verify the max read request size was set to 4KB
3245         * before trying the test with 4KB.
3246         */
3247        status = pcie_get_readrq(pdev);
3248        if (status < 0) {
3249                dev_err(dev, "Couldn't read max read req size: %d\n", status);
3250                goto abort;
3251        }
3252        if (status != 4096) {
3253                dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
3254                mgp->tx_boundary = 2048;
3255        }
3256        /*
3257         * load the optimized firmware (which assumes aligned PCIe
3258         * completions) in order to see if it works on this host.
3259         */
3260        mgp->fw_name = myri10ge_fw_aligned;
3261        status = myri10ge_load_firmware(mgp, 1);
3262        if (status != 0) {
3263                goto abort;
3264        }
3265
3266        /*
3267         * Enable ECRC if possible
3268         */
3269        myri10ge_enable_ecrc(mgp);
3270
3271        /*
3272         * Run a DMA test which watches for unaligned completions and
3273         * aborts on the first one seen.
3274         */
3275
3276        status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
3277        if (status == 0)
3278                return;         /* keep the aligned firmware */
3279
3280        if (status != -E2BIG)
3281                dev_warn(dev, "DMA test failed: %d\n", status);
3282        if (status == -ENOSYS)
3283                dev_warn(dev, "Falling back to ethp! "
3284                         "Please install up to date fw\n");
3285abort:
3286        /* fall back to using the unaligned firmware */
3287        mgp->tx_boundary = 2048;
3288        mgp->fw_name = myri10ge_fw_unaligned;
3289
3290}
3291
3292static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
3293{
3294        int overridden = 0;
3295
3296        if (myri10ge_force_firmware == 0) {
3297                int link_width, exp_cap;
3298                u16 lnk;
3299
3300                exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP);
3301                pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
3302                link_width = (lnk >> 4) & 0x3f;
3303
3304                /* Check to see if Link is less than 8 or if the
3305                 * upstream bridge is known to provide aligned
3306                 * completions */
3307                if (link_width < 8) {
3308                        dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
3309                                 link_width);
3310                        mgp->tx_boundary = 4096;
3311                        mgp->fw_name = myri10ge_fw_aligned;
3312                } else {
3313                        myri10ge_firmware_probe(mgp);
3314                }
3315        } else {
3316                if (myri10ge_force_firmware == 1) {
3317                        dev_info(&mgp->pdev->dev,
3318                                 "Assuming aligned completions (forced)\n");
3319                        mgp->tx_boundary = 4096;
3320                        mgp->fw_name = myri10ge_fw_aligned;
3321                } else {
3322                        dev_info(&mgp->pdev->dev,
3323                                 "Assuming unaligned completions (forced)\n");
3324                        mgp->tx_boundary = 2048;
3325                        mgp->fw_name = myri10ge_fw_unaligned;
3326                }
3327        }
3328        if (myri10ge_fw_name != NULL) {
3329                overridden = 1;
3330                mgp->fw_name = myri10ge_fw_name;
3331        }
3332        if (mgp->board_number < MYRI10GE_MAX_BOARDS &&
3333            myri10ge_fw_names[mgp->board_number] != NULL &&
3334            strlen(myri10ge_fw_names[mgp->board_number])) {
3335                mgp->fw_name = myri10ge_fw_names[mgp->board_number];
3336                overridden = 1;
3337        }
3338        if (overridden)
3339                dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
3340                         mgp->fw_name);
3341}
3342
3343#ifdef CONFIG_PM
3344static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
3345{
3346        struct myri10ge_priv *mgp;
3347        struct net_device *netdev;
3348
3349        mgp = pci_get_drvdata(pdev);
3350        if (mgp == NULL)
3351                return -EINVAL;
3352        netdev = mgp->dev;
3353
3354        netif_device_detach(netdev);
3355        if (netif_running(netdev)) {
3356                printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
3357                rtnl_lock();
3358                myri10ge_close(netdev);
3359                rtnl_unlock();
3360        }
3361        myri10ge_dummy_rdma(mgp, 0);
3362        pci_save_state(pdev);
3363        pci_disable_device(pdev);
3364
3365        return pci_set_power_state(pdev, pci_choose_state(pdev, state));
3366}
3367
3368static int myri10ge_resume(struct pci_dev *pdev)
3369{
3370        struct myri10ge_priv *mgp;
3371        struct net_device *netdev;
3372        int status;
3373        u16 vendor;
3374
3375        mgp = pci_get_drvdata(pdev);
3376        if (mgp == NULL)
3377                return -EINVAL;
3378        netdev = mgp->dev;
3379        pci_set_power_state(pdev, 0);   /* zeros conf space as a side effect */
3380        msleep(5);              /* give card time to respond */
3381        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3382        if (vendor == 0xffff) {
3383                printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
3384                       mgp->dev->name);
3385                return -EIO;
3386        }
3387
3388        status = pci_restore_state(pdev);
3389        if (status)
3390                return status;
3391
3392        status = pci_enable_device(pdev);
3393        if (status) {
3394                dev_err(&pdev->dev, "failed to enable device\n");
3395                return status;
3396        }
3397
3398        pci_set_master(pdev);
3399
3400        myri10ge_reset(mgp);
3401        myri10ge_dummy_rdma(mgp, 1);
3402
3403        /* Save configuration space to be restored if the
3404         * nic resets due to a parity error */
3405        pci_save_state(pdev);
3406
3407        if (netif_running(netdev)) {
3408                rtnl_lock();
3409                status = myri10ge_open(netdev);
3410                rtnl_unlock();
3411                if (status != 0)
3412                        goto abort_with_enabled;
3413
3414        }
3415        netif_device_attach(netdev);
3416
3417        return 0;
3418
3419abort_with_enabled:
3420        pci_disable_device(pdev);
3421        return -EIO;
3422
3423}
3424#endif                          /* CONFIG_PM */
3425
3426static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
3427{
3428        struct pci_dev *pdev = mgp->pdev;
3429        int vs = mgp->vendor_specific_offset;
3430        u32 reboot;
3431
3432        /*enter read32 mode */
3433        pci_write_config_byte(pdev, vs + 0x10, 0x3);
3434
3435        /*read REBOOT_STATUS (0xfffffff0) */
3436        pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
3437        pci_read_config_dword(pdev, vs + 0x14, &reboot);
3438        return reboot;
3439}
3440
3441/*
3442 * This watchdog is used to check whether the board has suffered
3443 * from a parity error and needs to be recovered.
3444 */
3445static void myri10ge_watchdog(struct work_struct *work)
3446{
3447        struct myri10ge_priv *mgp =
3448            container_of(work, struct myri10ge_priv, watchdog_work);
3449        struct myri10ge_tx_buf *tx;
3450        u32 reboot;
3451        int status, rebooted;
3452        int i;
3453        u16 cmd, vendor;
3454
3455        mgp->watchdog_resets++;
3456        pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3457        rebooted = 0;
3458        if ((cmd & PCI_COMMAND_MASTER) == 0) {
3459                /* Bus master DMA disabled?  Check to see
3460                 * if the card rebooted due to a parity error
3461                 * For now, just report it */
3462                reboot = myri10ge_read_reboot(mgp);
3463                printk(KERN_ERR
3464                       "myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
3465                       mgp->dev->name, reboot,
3466                       myri10ge_reset_recover ? " " : " not");
3467                if (myri10ge_reset_recover == 0)
3468                        return;
3469                rtnl_lock();
3470                mgp->rebooted = 1;
3471                rebooted = 1;
3472                myri10ge_close(mgp->dev);
3473                myri10ge_reset_recover--;
3474                mgp->rebooted = 0;
3475                /*
3476                 * A rebooted nic will come back with config space as
3477                 * it was after power was applied to PCIe bus.
3478                 * Attempt to restore config space which was saved
3479                 * when the driver was loaded, or the last time the
3480                 * nic was resumed from power saving mode.
3481                 */
3482                pci_restore_state(mgp->pdev);
3483
3484                /* save state again for accounting reasons */
3485                pci_save_state(mgp->pdev);
3486
3487        } else {
3488                /* if we get back -1's from our slot, perhaps somebody
3489                 * powered off our card.  Don't try to reset it in
3490                 * this case */
3491                if (cmd == 0xffff) {
3492                        pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
3493                        if (vendor == 0xffff) {
3494                                printk(KERN_ERR
3495                                       "myri10ge: %s: device disappeared!\n",
3496                                       mgp->dev->name);
3497                                return;
3498                        }
3499                }
3500                /* Perhaps it is a software error.  Try to reset */
3501
3502                printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
3503                       mgp->dev->name);
3504                for (i = 0; i < mgp->num_slices; i++) {
3505                        tx = &mgp->ss[i].tx;
3506                        printk(KERN_INFO
3507                               "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
3508                               mgp->dev->name, i, tx->queue_active, tx->req,
3509                               tx->done, tx->pkt_start, tx->pkt_done,
3510                               (int)ntohl(mgp->ss[i].fw_stats->
3511                                          send_done_count));
3512                        msleep(2000);
3513                        printk(KERN_INFO
3514                               "myri10ge: %s: (%d): %d %d %d %d %d %d\n",
3515                               mgp->dev->name, i, tx->queue_active, tx->req,
3516                               tx->done, tx->pkt_start, tx->pkt_done,
3517                               (int)ntohl(mgp->ss[i].fw_stats->
3518                                          send_done_count));
3519                }
3520        }
3521
3522        if (!rebooted) {
3523                rtnl_lock();
3524                myri10ge_close(mgp->dev);
3525        }
3526        status = myri10ge_load_firmware(mgp, 1);
3527        if (status != 0)
3528                printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
3529                       mgp->dev->name);
3530        else
3531                myri10ge_open(mgp->dev);
3532        rtnl_unlock();
3533}
3534
3535/*
3536 * We use our own timer routine rather than relying upon
3537 * netdev->tx_timeout because we have a very large hardware transmit
3538 * queue.  Due to the large queue, the netdev->tx_timeout function
3539 * cannot detect a NIC with a parity error in a timely fashion if the
3540 * NIC is lightly loaded.
3541 */
3542static void myri10ge_watchdog_timer(unsigned long arg)
3543{
3544        struct myri10ge_priv *mgp;
3545        struct myri10ge_slice_state *ss;
3546        int i, reset_needed, busy_slice_cnt;
3547        u32 rx_pause_cnt;
3548        u16 cmd;
3549
3550        mgp = (struct myri10ge_priv *)arg;
3551
3552        rx_pause_cnt = ntohl(mgp->ss[0].fw_stats->dropped_pause);
3553        busy_slice_cnt = 0;
3554        for (i = 0, reset_needed = 0;
3555             i < mgp->num_slices && reset_needed == 0; ++i) {
3556
3557                ss = &mgp->ss[i];
3558                if (ss->rx_small.watchdog_needed) {
3559                        myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
3560                                                mgp->small_bytes + MXGEFW_PAD,
3561                                                1);
3562                        if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
3563                            myri10ge_fill_thresh)
3564                                ss->rx_small.watchdog_needed = 0;
3565                }
3566                if (ss->rx_big.watchdog_needed) {
3567                        myri10ge_alloc_rx_pages(mgp, &ss->rx_big,
3568                                                mgp->big_bytes, 1);
3569                        if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
3570                            myri10ge_fill_thresh)
3571                                ss->rx_big.watchdog_needed = 0;
3572                }
3573
3574                if (ss->tx.req != ss->tx.done &&
3575                    ss->tx.done == ss->watchdog_tx_done &&
3576                    ss->watchdog_tx_req != ss->watchdog_tx_done) {
3577                        /* nic seems like it might be stuck.. */
3578                        if (rx_pause_cnt != mgp->watchdog_pause) {
3579                                if (net_ratelimit())
3580                                        printk(KERN_WARNING
3581                                               "myri10ge %s slice %d:"
3582                                               "TX paused, check link partner\n",
3583                                               mgp->dev->name, i);
3584                        } else {
3585                                printk(KERN_WARNING
3586                                       "myri10ge %s slice %d stuck:",
3587                                       mgp->dev->name, i);
3588                                reset_needed = 1;
3589                        }
3590                }
3591                if (ss->watchdog_tx_done != ss->tx.done ||
3592                    ss->watchdog_rx_done != ss->rx_done.cnt) {
3593                        busy_slice_cnt++;
3594                }
3595                ss->watchdog_tx_done = ss->tx.done;
3596                ss->watchdog_tx_req = ss->tx.req;
3597                ss->watchdog_rx_done = ss->rx_done.cnt;
3598        }
3599        /* if we've sent or received no traffic, poll the NIC to
3600         * ensure it is still there.  Otherwise, we risk not noticing
3601         * an error in a timely fashion */
3602        if (busy_slice_cnt == 0) {
3603                pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
3604                if ((cmd & PCI_COMMAND_MASTER) == 0) {
3605                        reset_needed = 1;
3606                }
3607        }
3608        mgp->watchdog_pause = rx_pause_cnt;
3609
3610        if (reset_needed) {
3611                schedule_work(&mgp->watchdog_work);
3612        } else {
3613                /* rearm timer */
3614                mod_timer(&mgp->watchdog_timer,
3615                          jiffies + myri10ge_watchdog_timeout * HZ);
3616        }
3617}
3618
3619static void myri10ge_free_slices(struct myri10ge_priv *mgp)
3620{
3621        struct myri10ge_slice_state *ss;
3622        struct pci_dev *pdev = mgp->pdev;
3623        size_t bytes;
3624        int i;
3625
3626        if (mgp->ss == NULL)
3627                return;
3628
3629        for (i = 0; i < mgp->num_slices; i++) {
3630                ss = &mgp->ss[i];
3631                if (ss->rx_done.entry != NULL) {
3632                        bytes = mgp->max_intr_slots *
3633                            sizeof(*ss->rx_done.entry);
3634                        dma_free_coherent(&pdev->dev, bytes,
3635                                          ss->rx_done.entry, ss->rx_done.bus);
3636                        ss->rx_done.entry = NULL;
3637                }
3638                if (ss->fw_stats != NULL) {
3639                        bytes = sizeof(*ss->fw_stats);
3640                        dma_free_coherent(&pdev->dev, bytes,
3641                                          ss->fw_stats, ss->fw_stats_bus);
3642                        ss->fw_stats = NULL;
3643                }
3644        }
3645        kfree(mgp->ss);
3646        mgp->ss = NULL;
3647}
3648
3649static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
3650{
3651        struct myri10ge_slice_state *ss;
3652        struct pci_dev *pdev = mgp->pdev;
3653        size_t bytes;
3654        int i;
3655
3656        bytes = sizeof(*mgp->ss) * mgp->num_slices;
3657        mgp->ss = kzalloc(bytes, GFP_KERNEL);
3658        if (mgp->ss == NULL) {
3659                return -ENOMEM;
3660        }
3661
3662        for (i = 0; i < mgp->num_slices; i++) {
3663                ss = &mgp->ss[i];
3664                bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
3665                ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
3666                                                       &ss->rx_done.bus,
3667                                                       GFP_KERNEL);
3668                if (ss->rx_done.entry == NULL)
3669                        goto abort;
3670                memset(ss->rx_done.entry, 0, bytes);
3671                bytes = sizeof(*ss->fw_stats);
3672                ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
3673                                                  &ss->fw_stats_bus,
3674                                                  GFP_KERNEL);
3675                if (ss->fw_stats == NULL)
3676                        goto abort;
3677                ss->mgp = mgp;
3678                ss->dev = mgp->dev;
3679                netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
3680                               myri10ge_napi_weight);
3681        }
3682        return 0;
3683abort:
3684        myri10ge_free_slices(mgp);
3685        return -ENOMEM;
3686}
3687
3688/*
3689 * This function determines the number of slices supported.
3690 * The number slices is the minumum of the number of CPUS,
3691 * the number of MSI-X irqs supported, the number of slices
3692 * supported by the firmware
3693 */
3694static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
3695{
3696        struct myri10ge_cmd cmd;
3697        struct pci_dev *pdev = mgp->pdev;
3698        char *old_fw;
3699        int i, status, ncpus, msix_cap;
3700
3701        mgp->num_slices = 1;
3702        msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
3703        ncpus = num_online_cpus();
3704
3705        if (myri10ge_max_slices == 1 || msix_cap == 0 ||
3706            (myri10ge_max_slices == -1 && ncpus < 2))
3707                return;
3708
3709        /* try to load the slice aware rss firmware */
3710        old_fw = mgp->fw_name;
3711        if (myri10ge_fw_name != NULL) {
3712                dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
3713                         myri10ge_fw_name);
3714                mgp->fw_name = myri10ge_fw_name;
3715        } else if (old_fw == myri10ge_fw_aligned)
3716                mgp->fw_name = myri10ge_fw_rss_aligned;
3717        else
3718                mgp->fw_name = myri10ge_fw_rss_unaligned;
3719        status = myri10ge_load_firmware(mgp, 0);
3720        if (status != 0) {
3721                dev_info(&pdev->dev, "Rss firmware not found\n");
3722                return;
3723        }
3724
3725        /* hit the board with a reset to ensure it is alive */
3726        memset(&cmd, 0, sizeof(cmd));
3727        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
3728        if (status != 0) {
3729                dev_err(&mgp->pdev->dev, "failed reset\n");
3730                goto abort_with_fw;
3731                return;
3732        }
3733
3734        mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
3735
3736        /* tell it the size of the interrupt queues */
3737        cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
3738        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
3739        if (status != 0) {
3740                dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
3741                goto abort_with_fw;
3742        }
3743
3744        /* ask the maximum number of slices it supports */
3745        status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
3746        if (status != 0)
3747                goto abort_with_fw;
3748        else
3749                mgp->num_slices = cmd.data0;
3750
3751        /* Only allow multiple slices if MSI-X is usable */
3752        if (!myri10ge_msi) {
3753                goto abort_with_fw;
3754        }
3755
3756        /* if the admin did not specify a limit to how many
3757         * slices we should use, cap it automatically to the
3758         * number of CPUs currently online */
3759        if (myri10ge_max_slices == -1)
3760                myri10ge_max_slices = ncpus;
3761
3762        if (mgp->num_slices > myri10ge_max_slices)
3763                mgp->num_slices = myri10ge_max_slices;
3764
3765        /* Now try to allocate as many MSI-X vectors as we have
3766         * slices. We give up on MSI-X if we can only get a single
3767         * vector. */
3768
3769        mgp->msix_vectors = kzalloc(mgp->num_slices *
3770                                    sizeof(*mgp->msix_vectors), GFP_KERNEL);
3771        if (mgp->msix_vectors == NULL)
3772                goto disable_msix;
3773        for (i = 0; i < mgp->num_slices; i++) {
3774                mgp->msix_vectors[i].entry = i;
3775        }
3776
3777        while (mgp->num_slices > 1) {
3778                /* make sure it is a power of two */
3779                while (!is_power_of_2(mgp->num_slices))
3780                        mgp->num_slices--;
3781                if (mgp->num_slices == 1)
3782                        goto disable_msix;
3783                status = pci_enable_msix(pdev, mgp->msix_vectors,
3784                                         mgp->num_slices);
3785                if (status == 0) {
3786                        pci_disable_msix(pdev);
3787                        return;
3788                }
3789                if (status > 0)
3790                        mgp->num_slices = status;
3791                else
3792                        goto disable_msix;
3793        }
3794
3795disable_msix:
3796        if (mgp->msix_vectors != NULL) {
3797                kfree(mgp->msix_vectors);
3798                mgp->msix_vectors = NULL;
3799        }
3800
3801abort_with_fw:
3802        mgp->num_slices = 1;
3803        mgp->fw_name = old_fw;
3804        myri10ge_load_firmware(mgp, 0);
3805}
3806
3807static const struct net_device_ops myri10ge_netdev_ops = {
3808        .ndo_open               = myri10ge_open,
3809        .ndo_stop               = myri10ge_close,
3810        .ndo_start_xmit         = myri10ge_xmit,
3811        .ndo_get_stats          = myri10ge_get_stats,
3812        .ndo_validate_addr      = eth_validate_addr,
3813        .ndo_change_mtu         = myri10ge_change_mtu,
3814        .ndo_set_multicast_list = myri10ge_set_multicast_list,
3815        .ndo_set_mac_address    = myri10ge_set_mac_address,
3816};
3817
3818static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3819{
3820        struct net_device *netdev;
3821        struct myri10ge_priv *mgp;
3822        struct device *dev = &pdev->dev;
3823        int i;
3824        int status = -ENXIO;
3825        int dac_enabled;
3826        unsigned hdr_offset, ss_offset;
3827        static int board_number;
3828
3829        netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
3830        if (netdev == NULL) {
3831                dev_err(dev, "Could not allocate ethernet device\n");
3832                return -ENOMEM;
3833        }
3834
3835        SET_NETDEV_DEV(netdev, &pdev->dev);
3836
3837        mgp = netdev_priv(netdev);
3838        mgp->dev = netdev;
3839        mgp->pdev = pdev;
3840        mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
3841        mgp->pause = myri10ge_flow_control;
3842        mgp->intr_coal_delay = myri10ge_intr_coal_delay;
3843        mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
3844        mgp->board_number = board_number;
3845        init_waitqueue_head(&mgp->down_wq);
3846
3847        if (pci_enable_device(pdev)) {
3848                dev_err(&pdev->dev, "pci_enable_device call failed\n");
3849                status = -ENODEV;
3850                goto abort_with_netdev;
3851        }
3852
3853        /* Find the vendor-specific cap so we can check
3854         * the reboot register later on */
3855        mgp->vendor_specific_offset
3856            = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
3857
3858        /* Set our max read request to 4KB */
3859        status = pcie_set_readrq(pdev, 4096);
3860        if (status != 0) {
3861                dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
3862                        status);
3863                goto abort_with_enabled;
3864        }
3865
3866        pci_set_master(pdev);
3867        dac_enabled = 1;
3868        status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
3869        if (status != 0) {
3870                dac_enabled = 0;
3871                dev_err(&pdev->dev,
3872                        "64-bit pci address mask was refused, "
3873                        "trying 32-bit\n");
3874                status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3875        }
3876        if (status != 0) {
3877                dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
3878                goto abort_with_enabled;
3879        }
3880        (void)pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
3881        mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
3882                                      &mgp->cmd_bus, GFP_KERNEL);
3883        if (mgp->cmd == NULL)
3884                goto abort_with_enabled;
3885
3886        mgp->board_span = pci_resource_len(pdev, 0);
3887        mgp->iomem_base = pci_resource_start(pdev, 0);
3888        mgp->mtrr = -1;
3889        mgp->wc_enabled = 0;
3890#ifdef CONFIG_MTRR
3891        mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
3892                             MTRR_TYPE_WRCOMB, 1);
3893        if (mgp->mtrr >= 0)
3894                mgp->wc_enabled = 1;
3895#endif
3896        mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
3897        if (mgp->sram == NULL) {
3898                dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
3899                        mgp->board_span, mgp->iomem_base);
3900                status = -ENXIO;
3901                goto abort_with_mtrr;
3902        }
3903        hdr_offset =
3904            ntohl(__raw_readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
3905        ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
3906        mgp->sram_size = ntohl(__raw_readl(mgp->sram + ss_offset));
3907        if (mgp->sram_size > mgp->board_span ||
3908            mgp->sram_size <= MYRI10GE_FW_OFFSET) {
3909                dev_err(&pdev->dev,
3910                        "invalid sram_size %dB or board span %ldB\n",
3911                        mgp->sram_size, mgp->board_span);
3912                goto abort_with_ioremap;
3913        }
3914        memcpy_fromio(mgp->eeprom_strings,
3915                      mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
3916        memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
3917        status = myri10ge_read_mac_addr(mgp);
3918        if (status)
3919                goto abort_with_ioremap;
3920
3921        for (i = 0; i < ETH_ALEN; i++)
3922                netdev->dev_addr[i] = mgp->mac_addr[i];
3923
3924        myri10ge_select_firmware(mgp);
3925
3926        status = myri10ge_load_firmware(mgp, 1);
3927        if (status != 0) {
3928                dev_err(&pdev->dev, "failed to load firmware\n");
3929                goto abort_with_ioremap;
3930        }
3931        myri10ge_probe_slices(mgp);
3932        status = myri10ge_alloc_slices(mgp);
3933        if (status != 0) {
3934                dev_err(&pdev->dev, "failed to alloc slice state\n");
3935                goto abort_with_firmware;
3936        }
3937        netdev->real_num_tx_queues = mgp->num_slices;
3938        status = myri10ge_reset(mgp);
3939        if (status != 0) {
3940                dev_err(&pdev->dev, "failed reset\n");
3941                goto abort_with_slices;
3942        }
3943#ifdef CONFIG_MYRI10GE_DCA
3944        myri10ge_setup_dca(mgp);
3945#endif
3946        pci_set_drvdata(pdev, mgp);
3947        if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
3948                myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
3949        if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
3950                myri10ge_initial_mtu = 68;
3951
3952        netdev->netdev_ops = &myri10ge_netdev_ops;
3953        netdev->mtu = myri10ge_initial_mtu;
3954        netdev->base_addr = mgp->iomem_base;
3955        netdev->features = mgp->features;
3956
3957        if (dac_enabled)
3958                netdev->features |= NETIF_F_HIGHDMA;
3959        netdev->features |= NETIF_F_LRO;
3960
3961        netdev->vlan_features |= mgp->features;
3962        if (mgp->fw_ver_tiny < 37)
3963                netdev->vlan_features &= ~NETIF_F_TSO6;
3964        if (mgp->fw_ver_tiny < 32)
3965                netdev->vlan_features &= ~NETIF_F_TSO;
3966
3967        /* make sure we can get an irq, and that MSI can be
3968         * setup (if available).  Also ensure netdev->irq
3969         * is set to correct value if MSI is enabled */
3970        status = myri10ge_request_irq(mgp);
3971        if (status != 0)
3972                goto abort_with_firmware;
3973        netdev->irq = pdev->irq;
3974        myri10ge_free_irq(mgp);
3975
3976        /* Save configuration space to be restored if the
3977         * nic resets due to a parity error */
3978        pci_save_state(pdev);
3979
3980        /* Setup the watchdog timer */
3981        setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
3982                    (unsigned long)mgp);
3983
3984        spin_lock_init(&mgp->stats_lock);
3985        SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
3986        INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
3987        status = register_netdev(netdev);
3988        if (status != 0) {
3989                dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
3990                goto abort_with_state;
3991        }
3992        if (mgp->msix_enabled)
3993                dev_info(dev, "%d MSI-X IRQs, tx bndry %d, fw %s, WC %s\n",
3994                         mgp->num_slices, mgp->tx_boundary, mgp->fw_name,
3995                         (mgp->wc_enabled ? "Enabled" : "Disabled"));
3996        else
3997                dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
3998                         mgp->msi_enabled ? "MSI" : "xPIC",
3999                         netdev->irq, mgp->tx_boundary, mgp->fw_name,
4000                         (mgp->wc_enabled ? "Enabled" : "Disabled"));
4001
4002        board_number++;
4003        return 0;
4004
4005abort_with_state:
4006        pci_restore_state(pdev);
4007
4008abort_with_slices:
4009        myri10ge_free_slices(mgp);
4010
4011abort_with_firmware:
4012        myri10ge_dummy_rdma(mgp, 0);
4013
4014abort_with_ioremap:
4015        if (mgp->mac_addr_string != NULL)
4016                dev_err(&pdev->dev,
4017                        "myri10ge_probe() failed: MAC=%s, SN=%ld\n",
4018                        mgp->mac_addr_string, mgp->serial_number);
4019        iounmap(mgp->sram);
4020
4021abort_with_mtrr:
4022#ifdef CONFIG_MTRR
4023        if (mgp->mtrr >= 0)
4024                mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
4025#endif
4026        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4027                          mgp->cmd, mgp->cmd_bus);
4028
4029abort_with_enabled:
4030        pci_disable_device(pdev);
4031
4032abort_with_netdev:
4033        free_netdev(netdev);
4034        return status;
4035}
4036
4037/*
4038 * myri10ge_remove
4039 *
4040 * Does what is necessary to shutdown one Myrinet device. Called
4041 *   once for each Myrinet card by the kernel when a module is
4042 *   unloaded.
4043 */
4044static void myri10ge_remove(struct pci_dev *pdev)
4045{
4046        struct myri10ge_priv *mgp;
4047        struct net_device *netdev;
4048
4049        mgp = pci_get_drvdata(pdev);
4050        if (mgp == NULL)
4051                return;
4052
4053        flush_scheduled_work();
4054        netdev = mgp->dev;
4055        unregister_netdev(netdev);
4056
4057#ifdef CONFIG_MYRI10GE_DCA
4058        myri10ge_teardown_dca(mgp);
4059#endif
4060        myri10ge_dummy_rdma(mgp, 0);
4061
4062        /* avoid a memory leak */
4063        pci_restore_state(pdev);
4064
4065        iounmap(mgp->sram);
4066
4067#ifdef CONFIG_MTRR
4068        if (mgp->mtrr >= 0)
4069                mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
4070#endif
4071        myri10ge_free_slices(mgp);
4072        if (mgp->msix_vectors != NULL)
4073                kfree(mgp->msix_vectors);
4074        dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
4075                          mgp->cmd, mgp->cmd_bus);
4076
4077        free_netdev(netdev);
4078        pci_disable_device(pdev);
4079        pci_set_drvdata(pdev, NULL);
4080}
4081
4082#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E      0x0008
4083#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9    0x0009
4084
4085static struct pci_device_id myri10ge_pci_tbl[] = {
4086        {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
4087        {PCI_DEVICE
4088         (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
4089        {0},
4090};
4091
4092MODULE_DEVICE_TABLE(pci, myri10ge_pci_tbl);
4093
4094static struct pci_driver myri10ge_driver = {
4095        .name = "myri10ge",
4096        .probe = myri10ge_probe,
4097        .remove = myri10ge_remove,
4098        .id_table = myri10ge_pci_tbl,
4099#ifdef CONFIG_PM
4100        .suspend = myri10ge_suspend,
4101        .resume = myri10ge_resume,
4102#endif
4103};
4104
4105#ifdef CONFIG_MYRI10GE_DCA
4106static int
4107myri10ge_notify_dca(struct notifier_block *nb, unsigned long event, void *p)
4108{
4109        int err = driver_for_each_device(&myri10ge_driver.driver,
4110                                         NULL, &event,
4111                                         myri10ge_notify_dca_device);
4112
4113        if (err)
4114                return NOTIFY_BAD;
4115        return NOTIFY_DONE;
4116}
4117
4118static struct notifier_block myri10ge_dca_notifier = {
4119        .notifier_call = myri10ge_notify_dca,
4120        .next = NULL,
4121        .priority = 0,
4122};
4123#endif                          /* CONFIG_MYRI10GE_DCA */
4124
4125static __init int myri10ge_init_module(void)
4126{
4127        printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
4128               MYRI10GE_VERSION_STR);
4129
4130        if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
4131                printk(KERN_ERR
4132                       "%s: Illegal rssh hash type %d, defaulting to source port\n",
4133                       myri10ge_driver.name, myri10ge_rss_hash);
4134                myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
4135        }
4136#ifdef CONFIG_MYRI10GE_DCA
4137        dca_register_notify(&myri10ge_dca_notifier);
4138#endif
4139        if (myri10ge_max_slices > MYRI10GE_MAX_SLICES)
4140                myri10ge_max_slices = MYRI10GE_MAX_SLICES;
4141
4142        return pci_register_driver(&myri10ge_driver);
4143}
4144
4145module_init(myri10ge_init_module);
4146
4147static __exit void myri10ge_cleanup_module(void)
4148{
4149#ifdef CONFIG_MYRI10GE_DCA
4150        dca_unregister_notify(&myri10ge_dca_notifier);
4151#endif
4152        pci_unregister_driver(&myri10ge_driver);
4153}
4154
4155module_exit(myri10ge_cleanup_module);
4156
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.