linux/drivers/ata/sata_sil24.c
<<
>>
Prefs
   1/*
   2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
   3 *
   4 * Copyright 2005  Tejun Heo
   5 *
   6 * Based on preview driver from Silicon Image.
   7 *
   8 * This program is free software; you can redistribute it and/or modify it
   9 * under the terms of the GNU General Public License as published by the
  10 * Free Software Foundation; either version 2, or (at your option) any
  11 * later version.
  12 *
  13 * This program is distributed in the hope that it will be useful, but
  14 * WITHOUT ANY WARRANTY; without even the implied warranty of
  15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  16 * General Public License for more details.
  17 *
  18 */
  19
  20#include <linux/kernel.h>
  21#include <linux/module.h>
  22#include <linux/pci.h>
  23#include <linux/blkdev.h>
  24#include <linux/delay.h>
  25#include <linux/interrupt.h>
  26#include <linux/dma-mapping.h>
  27#include <linux/device.h>
  28#include <scsi/scsi_host.h>
  29#include <scsi/scsi_cmnd.h>
  30#include <linux/libata.h>
  31
  32#define DRV_NAME        "sata_sil24"
  33#define DRV_VERSION     "1.1"
  34
  35/*
  36 * Port request block (PRB) 32 bytes
  37 */
  38struct sil24_prb {
  39        __le16  ctrl;
  40        __le16  prot;
  41        __le32  rx_cnt;
  42        u8      fis[6 * 4];
  43};
  44
  45/*
  46 * Scatter gather entry (SGE) 16 bytes
  47 */
  48struct sil24_sge {
  49        __le64  addr;
  50        __le32  cnt;
  51        __le32  flags;
  52};
  53
  54
  55enum {
  56        SIL24_HOST_BAR          = 0,
  57        SIL24_PORT_BAR          = 2,
  58
  59        /* sil24 fetches in chunks of 64bytes.  The first block
  60         * contains the PRB and two SGEs.  From the second block, it's
  61         * consisted of four SGEs and called SGT.  Calculate the
  62         * number of SGTs that fit into one page.
  63         */
  64        SIL24_PRB_SZ            = sizeof(struct sil24_prb)
  65                                  + 2 * sizeof(struct sil24_sge),
  66        SIL24_MAX_SGT           = (PAGE_SIZE - SIL24_PRB_SZ)
  67                                  / (4 * sizeof(struct sil24_sge)),
  68
  69        /* This will give us one unused SGEs for ATA.  This extra SGE
  70         * will be used to store CDB for ATAPI devices.
  71         */
  72        SIL24_MAX_SGE           = 4 * SIL24_MAX_SGT + 1,
  73
  74        /*
  75         * Global controller registers (128 bytes @ BAR0)
  76         */
  77                /* 32 bit regs */
  78        HOST_SLOT_STAT          = 0x00, /* 32 bit slot stat * 4 */
  79        HOST_CTRL               = 0x40,
  80        HOST_IRQ_STAT           = 0x44,
  81        HOST_PHY_CFG            = 0x48,
  82        HOST_BIST_CTRL          = 0x50,
  83        HOST_BIST_PTRN          = 0x54,
  84        HOST_BIST_STAT          = 0x58,
  85        HOST_MEM_BIST_STAT      = 0x5c,
  86        HOST_FLASH_CMD          = 0x70,
  87                /* 8 bit regs */
  88        HOST_FLASH_DATA         = 0x74,
  89        HOST_TRANSITION_DETECT  = 0x75,
  90        HOST_GPIO_CTRL          = 0x76,
  91        HOST_I2C_ADDR           = 0x78, /* 32 bit */
  92        HOST_I2C_DATA           = 0x7c,
  93        HOST_I2C_XFER_CNT       = 0x7e,
  94        HOST_I2C_CTRL           = 0x7f,
  95
  96        /* HOST_SLOT_STAT bits */
  97        HOST_SSTAT_ATTN         = (1 << 31),
  98
  99        /* HOST_CTRL bits */
 100        HOST_CTRL_M66EN         = (1 << 16), /* M66EN PCI bus signal */
 101        HOST_CTRL_TRDY          = (1 << 17), /* latched PCI TRDY */
 102        HOST_CTRL_STOP          = (1 << 18), /* latched PCI STOP */
 103        HOST_CTRL_DEVSEL        = (1 << 19), /* latched PCI DEVSEL */
 104        HOST_CTRL_REQ64         = (1 << 20), /* latched PCI REQ64 */
 105        HOST_CTRL_GLOBAL_RST    = (1 << 31), /* global reset */
 106
 107        /*
 108         * Port registers
 109         * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
 110         */
 111        PORT_REGS_SIZE          = 0x2000,
 112
 113        PORT_LRAM               = 0x0000, /* 31 LRAM slots and PMP regs */
 114        PORT_LRAM_SLOT_SZ       = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
 115
 116        PORT_PMP                = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
 117        PORT_PMP_STATUS         = 0x0000, /* port device status offset */
 118        PORT_PMP_QACTIVE        = 0x0004, /* port device QActive offset */
 119        PORT_PMP_SIZE           = 0x0008, /* 8 bytes per PMP */
 120
 121                /* 32 bit regs */
 122        PORT_CTRL_STAT          = 0x1000, /* write: ctrl-set, read: stat */
 123        PORT_CTRL_CLR           = 0x1004, /* write: ctrl-clear */
 124        PORT_IRQ_STAT           = 0x1008, /* high: status, low: interrupt */
 125        PORT_IRQ_ENABLE_SET     = 0x1010, /* write: enable-set */
 126        PORT_IRQ_ENABLE_CLR     = 0x1014, /* write: enable-clear */
 127        PORT_ACTIVATE_UPPER_ADDR= 0x101c,
 128        PORT_EXEC_FIFO          = 0x1020, /* command execution fifo */
 129        PORT_CMD_ERR            = 0x1024, /* command error number */
 130        PORT_FIS_CFG            = 0x1028,
 131        PORT_FIFO_THRES         = 0x102c,
 132                /* 16 bit regs */
 133        PORT_DECODE_ERR_CNT     = 0x1040,
 134        PORT_DECODE_ERR_THRESH  = 0x1042,
 135        PORT_CRC_ERR_CNT        = 0x1044,
 136        PORT_CRC_ERR_THRESH     = 0x1046,
 137        PORT_HSHK_ERR_CNT       = 0x1048,
 138        PORT_HSHK_ERR_THRESH    = 0x104a,
 139                /* 32 bit regs */
 140        PORT_PHY_CFG            = 0x1050,
 141        PORT_SLOT_STAT          = 0x1800,
 142        PORT_CMD_ACTIVATE       = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
 143        PORT_CONTEXT            = 0x1e04,
 144        PORT_EXEC_DIAG          = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
 145        PORT_PSD_DIAG           = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
 146        PORT_SCONTROL           = 0x1f00,
 147        PORT_SSTATUS            = 0x1f04,
 148        PORT_SERROR             = 0x1f08,
 149        PORT_SACTIVE            = 0x1f0c,
 150
 151        /* PORT_CTRL_STAT bits */
 152        PORT_CS_PORT_RST        = (1 << 0), /* port reset */
 153        PORT_CS_DEV_RST         = (1 << 1), /* device reset */
 154        PORT_CS_INIT            = (1 << 2), /* port initialize */
 155        PORT_CS_IRQ_WOC         = (1 << 3), /* interrupt write one to clear */
 156        PORT_CS_CDB16           = (1 << 5), /* 0=12b cdb, 1=16b cdb */
 157        PORT_CS_PMP_RESUME      = (1 << 6), /* PMP resume */
 158        PORT_CS_32BIT_ACTV      = (1 << 10), /* 32-bit activation */
 159        PORT_CS_PMP_EN          = (1 << 13), /* port multiplier enable */
 160        PORT_CS_RDY             = (1 << 31), /* port ready to accept commands */
 161
 162        /* PORT_IRQ_STAT/ENABLE_SET/CLR */
 163        /* bits[11:0] are masked */
 164        PORT_IRQ_COMPLETE       = (1 << 0), /* command(s) completed */
 165        PORT_IRQ_ERROR          = (1 << 1), /* command execution error */
 166        PORT_IRQ_PORTRDY_CHG    = (1 << 2), /* port ready change */
 167        PORT_IRQ_PWR_CHG        = (1 << 3), /* power management change */
 168        PORT_IRQ_PHYRDY_CHG     = (1 << 4), /* PHY ready change */
 169        PORT_IRQ_COMWAKE        = (1 << 5), /* COMWAKE received */
 170        PORT_IRQ_UNK_FIS        = (1 << 6), /* unknown FIS received */
 171        PORT_IRQ_DEV_XCHG       = (1 << 7), /* device exchanged */
 172        PORT_IRQ_8B10B          = (1 << 8), /* 8b/10b decode error threshold */
 173        PORT_IRQ_CRC            = (1 << 9), /* CRC error threshold */
 174        PORT_IRQ_HANDSHAKE      = (1 << 10), /* handshake error threshold */
 175        PORT_IRQ_SDB_NOTIFY     = (1 << 11), /* SDB notify received */
 176
 177        DEF_PORT_IRQ            = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
 178                                  PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
 179                                  PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
 180
 181        /* bits[27:16] are unmasked (raw) */
 182        PORT_IRQ_RAW_SHIFT      = 16,
 183        PORT_IRQ_MASKED_MASK    = 0x7ff,
 184        PORT_IRQ_RAW_MASK       = (0x7ff << PORT_IRQ_RAW_SHIFT),
 185
 186        /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
 187        PORT_IRQ_STEER_SHIFT    = 30,
 188        PORT_IRQ_STEER_MASK     = (3 << PORT_IRQ_STEER_SHIFT),
 189
 190        /* PORT_CMD_ERR constants */
 191        PORT_CERR_DEV           = 1, /* Error bit in D2H Register FIS */
 192        PORT_CERR_SDB           = 2, /* Error bit in SDB FIS */
 193        PORT_CERR_DATA          = 3, /* Error in data FIS not detected by dev */
 194        PORT_CERR_SEND          = 4, /* Initial cmd FIS transmission failure */
 195        PORT_CERR_INCONSISTENT  = 5, /* Protocol mismatch */
 196        PORT_CERR_DIRECTION     = 6, /* Data direction mismatch */
 197        PORT_CERR_UNDERRUN      = 7, /* Ran out of SGEs while writing */
 198        PORT_CERR_OVERRUN       = 8, /* Ran out of SGEs while reading */
 199        PORT_CERR_PKT_PROT      = 11, /* DIR invalid in 1st PIO setup of ATAPI */
 200        PORT_CERR_SGT_BOUNDARY  = 16, /* PLD ecode 00 - SGT not on qword boundary */
 201        PORT_CERR_SGT_TGTABRT   = 17, /* PLD ecode 01 - target abort */
 202        PORT_CERR_SGT_MSTABRT   = 18, /* PLD ecode 10 - master abort */
 203        PORT_CERR_SGT_PCIPERR   = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
 204        PORT_CERR_CMD_BOUNDARY  = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
 205        PORT_CERR_CMD_TGTABRT   = 25, /* ctrl[15:13] 010 - target abort */
 206        PORT_CERR_CMD_MSTABRT   = 26, /* ctrl[15:13] 100 - master abort */
 207        PORT_CERR_CMD_PCIPERR   = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
 208        PORT_CERR_XFR_UNDEF     = 32, /* PSD ecode 00 - undefined */
 209        PORT_CERR_XFR_TGTABRT   = 33, /* PSD ecode 01 - target abort */
 210        PORT_CERR_XFR_MSTABRT   = 34, /* PSD ecode 10 - master abort */
 211        PORT_CERR_XFR_PCIPERR   = 35, /* PSD ecode 11 - PCI prity err during transfer */
 212        PORT_CERR_SENDSERVICE   = 36, /* FIS received while sending service */
 213
 214        /* bits of PRB control field */
 215        PRB_CTRL_PROTOCOL       = (1 << 0), /* override def. ATA protocol */
 216        PRB_CTRL_PACKET_READ    = (1 << 4), /* PACKET cmd read */
 217        PRB_CTRL_PACKET_WRITE   = (1 << 5), /* PACKET cmd write */
 218        PRB_CTRL_NIEN           = (1 << 6), /* Mask completion irq */
 219        PRB_CTRL_SRST           = (1 << 7), /* Soft reset request (ign BSY?) */
 220
 221        /* PRB protocol field */
 222        PRB_PROT_PACKET         = (1 << 0),
 223        PRB_PROT_TCQ            = (1 << 1),
 224        PRB_PROT_NCQ            = (1 << 2),
 225        PRB_PROT_READ           = (1 << 3),
 226        PRB_PROT_WRITE          = (1 << 4),
 227        PRB_PROT_TRANSPARENT    = (1 << 5),
 228
 229        /*
 230         * Other constants
 231         */
 232        SGE_TRM                 = (1 << 31), /* Last SGE in chain */
 233        SGE_LNK                 = (1 << 30), /* linked list
 234                                                Points to SGT, not SGE */
 235        SGE_DRD                 = (1 << 29), /* discard data read (/dev/null)
 236                                                data address ignored */
 237
 238        SIL24_MAX_CMDS          = 31,
 239
 240        /* board id */
 241        BID_SIL3124             = 0,
 242        BID_SIL3132             = 1,
 243        BID_SIL3131             = 2,
 244
 245        /* host flags */
 246        SIL24_COMMON_FLAGS      = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 247                                  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
 248                                  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
 249                                  ATA_FLAG_AN | ATA_FLAG_PMP,
 250        SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
 251
 252        IRQ_STAT_4PORTS         = 0xf,
 253};
 254
 255struct sil24_ata_block {
 256        struct sil24_prb prb;
 257        struct sil24_sge sge[SIL24_MAX_SGE];
 258};
 259
 260struct sil24_atapi_block {
 261        struct sil24_prb prb;
 262        u8 cdb[16];
 263        struct sil24_sge sge[SIL24_MAX_SGE];
 264};
 265
 266union sil24_cmd_block {
 267        struct sil24_ata_block ata;
 268        struct sil24_atapi_block atapi;
 269};
 270
 271static struct sil24_cerr_info {
 272        unsigned int err_mask, action;
 273        const char *desc;
 274} sil24_cerr_db[] = {
 275        [0]                     = { AC_ERR_DEV, 0,
 276                                    "device error" },
 277        [PORT_CERR_DEV]         = { AC_ERR_DEV, 0,
 278                                    "device error via D2H FIS" },
 279        [PORT_CERR_SDB]         = { AC_ERR_DEV, 0,
 280                                    "device error via SDB FIS" },
 281        [PORT_CERR_DATA]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
 282                                    "error in data FIS" },
 283        [PORT_CERR_SEND]        = { AC_ERR_ATA_BUS, ATA_EH_RESET,
 284                                    "failed to transmit command FIS" },
 285        [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
 286                                     "protocol mismatch" },
 287        [PORT_CERR_DIRECTION]   = { AC_ERR_HSM, ATA_EH_RESET,
 288                                    "data directon mismatch" },
 289        [PORT_CERR_UNDERRUN]    = { AC_ERR_HSM, ATA_EH_RESET,
 290                                    "ran out of SGEs while writing" },
 291        [PORT_CERR_OVERRUN]     = { AC_ERR_HSM, ATA_EH_RESET,
 292                                    "ran out of SGEs while reading" },
 293        [PORT_CERR_PKT_PROT]    = { AC_ERR_HSM, ATA_EH_RESET,
 294                                    "invalid data directon for ATAPI CDB" },
 295        [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 296                                     "SGT not on qword boundary" },
 297        [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 298                                    "PCI target abort while fetching SGT" },
 299        [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 300                                    "PCI master abort while fetching SGT" },
 301        [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 302                                    "PCI parity error while fetching SGT" },
 303        [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
 304                                     "PRB not on qword boundary" },
 305        [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 306                                    "PCI target abort while fetching PRB" },
 307        [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 308                                    "PCI master abort while fetching PRB" },
 309        [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 310                                    "PCI parity error while fetching PRB" },
 311        [PORT_CERR_XFR_UNDEF]   = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 312                                    "undefined error while transferring data" },
 313        [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 314                                    "PCI target abort while transferring data" },
 315        [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 316                                    "PCI master abort while transferring data" },
 317        [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
 318                                    "PCI parity error while transferring data" },
 319        [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
 320                                    "FIS received while sending service FIS" },
 321};
 322
 323/*
 324 * ap->private_data
 325 *
 326 * The preview driver always returned 0 for status.  We emulate it
 327 * here from the previous interrupt.
 328 */
 329struct sil24_port_priv {
 330        union sil24_cmd_block *cmd_block;       /* 32 cmd blocks */
 331        dma_addr_t cmd_block_dma;               /* DMA base addr for them */
 332        int do_port_rst;
 333};
 334
 335static void sil24_dev_config(struct ata_device *dev);
 336static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
 337static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
 338static int sil24_qc_defer(struct ata_queued_cmd *qc);
 339static void sil24_qc_prep(struct ata_queued_cmd *qc);
 340static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
 341static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
 342static void sil24_pmp_attach(struct ata_port *ap);
 343static void sil24_pmp_detach(struct ata_port *ap);
 344static void sil24_freeze(struct ata_port *ap);
 345static void sil24_thaw(struct ata_port *ap);
 346static int sil24_softreset(struct ata_link *link, unsigned int *class,
 347                           unsigned long deadline);
 348static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 349                           unsigned long deadline);
 350static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 351                               unsigned long deadline);
 352static void sil24_error_handler(struct ata_port *ap);
 353static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
 354static int sil24_port_start(struct ata_port *ap);
 355static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 356#ifdef CONFIG_PM
 357static int sil24_pci_device_resume(struct pci_dev *pdev);
 358static int sil24_port_resume(struct ata_port *ap);
 359#endif
 360
 361static const struct pci_device_id sil24_pci_tbl[] = {
 362        { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
 363        { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
 364        { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
 365        { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
 366        { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
 367        { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
 368        { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
 369
 370        { } /* terminate list */
 371};
 372
 373static struct pci_driver sil24_pci_driver = {
 374        .name                   = DRV_NAME,
 375        .id_table               = sil24_pci_tbl,
 376        .probe                  = sil24_init_one,
 377        .remove                 = ata_pci_remove_one,
 378#ifdef CONFIG_PM
 379        .suspend                = ata_pci_device_suspend,
 380        .resume                 = sil24_pci_device_resume,
 381#endif
 382};
 383
 384static struct scsi_host_template sil24_sht = {
 385        ATA_NCQ_SHT(DRV_NAME),
 386        .can_queue              = SIL24_MAX_CMDS,
 387        .sg_tablesize           = SIL24_MAX_SGE,
 388        .dma_boundary           = ATA_DMA_BOUNDARY,
 389};
 390
 391static struct ata_port_operations sil24_ops = {
 392        .inherits               = &sata_pmp_port_ops,
 393
 394        .qc_defer               = sil24_qc_defer,
 395        .qc_prep                = sil24_qc_prep,
 396        .qc_issue               = sil24_qc_issue,
 397        .qc_fill_rtf            = sil24_qc_fill_rtf,
 398
 399        .freeze                 = sil24_freeze,
 400        .thaw                   = sil24_thaw,
 401        .softreset              = sil24_softreset,
 402        .hardreset              = sil24_hardreset,
 403        .pmp_softreset          = sil24_softreset,
 404        .pmp_hardreset          = sil24_pmp_hardreset,
 405        .error_handler          = sil24_error_handler,
 406        .post_internal_cmd      = sil24_post_internal_cmd,
 407        .dev_config             = sil24_dev_config,
 408
 409        .scr_read               = sil24_scr_read,
 410        .scr_write              = sil24_scr_write,
 411        .pmp_attach             = sil24_pmp_attach,
 412        .pmp_detach             = sil24_pmp_detach,
 413
 414        .port_start             = sil24_port_start,
 415#ifdef CONFIG_PM
 416        .port_resume            = sil24_port_resume,
 417#endif
 418};
 419
 420/*
 421 * Use bits 30-31 of port_flags to encode available port numbers.
 422 * Current maxium is 4.
 423 */
 424#define SIL24_NPORTS2FLAG(nports)       ((((unsigned)(nports) - 1) & 0x3) << 30)
 425#define SIL24_FLAG2NPORTS(flag)         ((((flag) >> 30) & 0x3) + 1)
 426
 427static const struct ata_port_info sil24_port_info[] = {
 428        /* sil_3124 */
 429        {
 430                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 431                                  SIL24_FLAG_PCIX_IRQ_WOC,
 432                .pio_mask       = ATA_PIO4,
 433                .mwdma_mask     = ATA_MWDMA2,
 434                .udma_mask      = ATA_UDMA5,
 435                .port_ops       = &sil24_ops,
 436        },
 437        /* sil_3132 */
 438        {
 439                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
 440                .pio_mask       = ATA_PIO4,
 441                .mwdma_mask     = ATA_MWDMA2,
 442                .udma_mask      = ATA_UDMA5,
 443                .port_ops       = &sil24_ops,
 444        },
 445        /* sil_3131/sil_3531 */
 446        {
 447                .flags          = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
 448                .pio_mask       = ATA_PIO4,
 449                .mwdma_mask     = ATA_MWDMA2,
 450                .udma_mask      = ATA_UDMA5,
 451                .port_ops       = &sil24_ops,
 452        },
 453};
 454
 455static int sil24_tag(int tag)
 456{
 457        if (unlikely(ata_tag_internal(tag)))
 458                return 0;
 459        return tag;
 460}
 461
 462static unsigned long sil24_port_offset(struct ata_port *ap)
 463{
 464        return ap->port_no * PORT_REGS_SIZE;
 465}
 466
 467static void __iomem *sil24_port_base(struct ata_port *ap)
 468{
 469        return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
 470}
 471
 472static void sil24_dev_config(struct ata_device *dev)
 473{
 474        void __iomem *port = sil24_port_base(dev->link->ap);
 475
 476        if (dev->cdb_len == 16)
 477                writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
 478        else
 479                writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
 480}
 481
 482static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
 483{
 484        void __iomem *port = sil24_port_base(ap);
 485        struct sil24_prb __iomem *prb;
 486        u8 fis[6 * 4];
 487
 488        prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
 489        memcpy_fromio(fis, prb->fis, sizeof(fis));
 490        ata_tf_from_fis(fis, tf);
 491}
 492
 493static int sil24_scr_map[] = {
 494        [SCR_CONTROL]   = 0,
 495        [SCR_STATUS]    = 1,
 496        [SCR_ERROR]     = 2,
 497        [SCR_ACTIVE]    = 3,
 498};
 499
 500static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
 501{
 502        void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
 503
 504        if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 505                void __iomem *addr;
 506                addr = scr_addr + sil24_scr_map[sc_reg] * 4;
 507                *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
 508                return 0;
 509        }
 510        return -EINVAL;
 511}
 512
 513static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
 514{
 515        void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
 516
 517        if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
 518                void __iomem *addr;
 519                addr = scr_addr + sil24_scr_map[sc_reg] * 4;
 520                writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
 521                return 0;
 522        }
 523        return -EINVAL;
 524}
 525
 526static void sil24_config_port(struct ata_port *ap)
 527{
 528        void __iomem *port = sil24_port_base(ap);
 529
 530        /* configure IRQ WoC */
 531        if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
 532                writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
 533        else
 534                writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
 535
 536        /* zero error counters. */
 537        writel(0x8000, port + PORT_DECODE_ERR_THRESH);
 538        writel(0x8000, port + PORT_CRC_ERR_THRESH);
 539        writel(0x8000, port + PORT_HSHK_ERR_THRESH);
 540        writel(0x0000, port + PORT_DECODE_ERR_CNT);
 541        writel(0x0000, port + PORT_CRC_ERR_CNT);
 542        writel(0x0000, port + PORT_HSHK_ERR_CNT);
 543
 544        /* always use 64bit activation */
 545        writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
 546
 547        /* clear port multiplier enable and resume bits */
 548        writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
 549}
 550
 551static void sil24_config_pmp(struct ata_port *ap, int attached)
 552{
 553        void __iomem *port = sil24_port_base(ap);
 554
 555        if (attached)
 556                writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
 557        else
 558                writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
 559}
 560
 561static void sil24_clear_pmp(struct ata_port *ap)
 562{
 563        void __iomem *port = sil24_port_base(ap);
 564        int i;
 565
 566        writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
 567
 568        for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
 569                void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
 570
 571                writel(0, pmp_base + PORT_PMP_STATUS);
 572                writel(0, pmp_base + PORT_PMP_QACTIVE);
 573        }
 574}
 575
 576static int sil24_init_port(struct ata_port *ap)
 577{
 578        void __iomem *port = sil24_port_base(ap);
 579        struct sil24_port_priv *pp = ap->private_data;
 580        u32 tmp;
 581
 582        /* clear PMP error status */
 583        if (sata_pmp_attached(ap))
 584                sil24_clear_pmp(ap);
 585
 586        writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
 587        ata_wait_register(port + PORT_CTRL_STAT,
 588                          PORT_CS_INIT, PORT_CS_INIT, 10, 100);
 589        tmp = ata_wait_register(port + PORT_CTRL_STAT,
 590                                PORT_CS_RDY, 0, 10, 100);
 591
 592        if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
 593                pp->do_port_rst = 1;
 594                ap->link.eh_context.i.action |= ATA_EH_RESET;
 595                return -EIO;
 596        }
 597
 598        return 0;
 599}
 600
 601static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
 602                                 const struct ata_taskfile *tf,
 603                                 int is_cmd, u32 ctrl,
 604                                 unsigned long timeout_msec)
 605{
 606        void __iomem *port = sil24_port_base(ap);
 607        struct sil24_port_priv *pp = ap->private_data;
 608        struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
 609        dma_addr_t paddr = pp->cmd_block_dma;
 610        u32 irq_enabled, irq_mask, irq_stat;
 611        int rc;
 612
 613        prb->ctrl = cpu_to_le16(ctrl);
 614        ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
 615
 616        /* temporarily plug completion and error interrupts */
 617        irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
 618        writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
 619
 620        writel((u32)paddr, port + PORT_CMD_ACTIVATE);
 621        writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
 622
 623        irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
 624        irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask, 0x0,
 625                                     10, timeout_msec);
 626
 627        writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
 628        irq_stat >>= PORT_IRQ_RAW_SHIFT;
 629
 630        if (irq_stat & PORT_IRQ_COMPLETE)
 631                rc = 0;
 632        else {
 633                /* force port into known state */
 634                sil24_init_port(ap);
 635
 636                if (irq_stat & PORT_IRQ_ERROR)
 637                        rc = -EIO;
 638                else
 639                        rc = -EBUSY;
 640        }
 641
 642        /* restore IRQ enabled */
 643        writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
 644
 645        return rc;
 646}
 647
 648static int sil24_softreset(struct ata_link *link, unsigned int *class,
 649                           unsigned long deadline)
 650{
 651        struct ata_port *ap = link->ap;
 652        int pmp = sata_srst_pmp(link);
 653        unsigned long timeout_msec = 0;
 654        struct ata_taskfile tf;
 655        const char *reason;
 656        int rc;
 657
 658        DPRINTK("ENTER\n");
 659
 660        /* put the port into known state */
 661        if (sil24_init_port(ap)) {
 662                reason = "port not ready";
 663                goto err;
 664        }
 665
 666        /* do SRST */
 667        if (time_after(deadline, jiffies))
 668                timeout_msec = jiffies_to_msecs(deadline - jiffies);
 669
 670        ata_tf_init(link->device, &tf); /* doesn't really matter */
 671        rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
 672                                   timeout_msec);
 673        if (rc == -EBUSY) {
 674                reason = "timeout";
 675                goto err;
 676        } else if (rc) {
 677                reason = "SRST command error";
 678                goto err;
 679        }
 680
 681        sil24_read_tf(ap, 0, &tf);
 682        *class = ata_dev_classify(&tf);
 683
 684        DPRINTK("EXIT, class=%u\n", *class);
 685        return 0;
 686
 687 err:
 688        ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
 689        return -EIO;
 690}
 691
 692static int sil24_hardreset(struct ata_link *link, unsigned int *class,
 693                           unsigned long deadline)
 694{
 695        struct ata_port *ap = link->ap;
 696        void __iomem *port = sil24_port_base(ap);
 697        struct sil24_port_priv *pp = ap->private_data;
 698        int did_port_rst = 0;
 699        const char *reason;
 700        int tout_msec, rc;
 701        u32 tmp;
 702
 703 retry:
 704        /* Sometimes, DEV_RST is not enough to recover the controller.
 705         * This happens often after PM DMA CS errata.
 706         */
 707        if (pp->do_port_rst) {
 708                ata_port_printk(ap, KERN_WARNING, "controller in dubious "
 709                                "state, performing PORT_RST\n");
 710
 711                writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
 712                msleep(10);
 713                writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
 714                ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
 715                                  10, 5000);
 716
 717                /* restore port configuration */
 718                sil24_config_port(ap);
 719                sil24_config_pmp(ap, ap->nr_pmp_links);
 720
 721                pp->do_port_rst = 0;
 722                did_port_rst = 1;
 723        }
 724
 725        /* sil24 does the right thing(tm) without any protection */
 726        sata_set_spd(link);
 727
 728        tout_msec = 100;
 729        if (ata_link_online(link))
 730                tout_msec = 5000;
 731
 732        writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
 733        tmp = ata_wait_register(port + PORT_CTRL_STAT,
 734                                PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
 735                                tout_msec);
 736
 737        /* SStatus oscillates between zero and valid status after
 738         * DEV_RST, debounce it.
 739         */
 740        rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
 741        if (rc) {
 742                reason = "PHY debouncing failed";
 743                goto err;
 744        }
 745
 746        if (tmp & PORT_CS_DEV_RST) {
 747                if (ata_link_offline(link))
 748                        return 0;
 749                reason = "link not ready";
 750                goto err;
 751        }
 752
 753        /* Sil24 doesn't store signature FIS after hardreset, so we
 754         * can't wait for BSY to clear.  Some devices take a long time
 755         * to get ready and those devices will choke if we don't wait
 756         * for BSY clearance here.  Tell libata to perform follow-up
 757         * softreset.
 758         */
 759        return -EAGAIN;
 760
 761 err:
 762        if (!did_port_rst) {
 763                pp->do_port_rst = 1;
 764                goto retry;
 765        }
 766
 767        ata_link_printk(link, KERN_ERR, "hardreset failed (%s)\n", reason);
 768        return -EIO;
 769}
 770
 771static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
 772                                 struct sil24_sge *sge)
 773{
 774        struct scatterlist *sg;
 775        struct sil24_sge *last_sge = NULL;
 776        unsigned int si;
 777
 778        for_each_sg(qc->sg, sg, qc->n_elem, si) {
 779                sge->addr = cpu_to_le64(sg_dma_address(sg));
 780                sge->cnt = cpu_to_le32(sg_dma_len(sg));
 781                sge->flags = 0;
 782
 783                last_sge = sge;
 784                sge++;
 785        }
 786
 787        last_sge->flags = cpu_to_le32(SGE_TRM);
 788}
 789
 790static int sil24_qc_defer(struct ata_queued_cmd *qc)
 791{
 792        struct ata_link *link = qc->dev->link;
 793        struct ata_port *ap = link->ap;
 794        u8 prot = qc->tf.protocol;
 795
 796        /*
 797         * There is a bug in the chip:
 798         * Port LRAM Causes the PRB/SGT Data to be Corrupted
 799         * If the host issues a read request for LRAM and SActive registers
 800         * while active commands are available in the port, PRB/SGT data in
 801         * the LRAM can become corrupted. This issue applies only when
 802         * reading from, but not writing to, the LRAM.
 803         *
 804         * Therefore, reading LRAM when there is no particular error [and
 805         * other commands may be outstanding] is prohibited.
 806         *
 807         * To avoid this bug there are two situations where a command must run
 808         * exclusive of any other commands on the port:
 809         *
 810         * - ATAPI commands which check the sense data
 811         * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
 812         *   set.
 813         *
 814         */
 815        int is_excl = (ata_is_atapi(prot) ||
 816                       (qc->flags & ATA_QCFLAG_RESULT_TF));
 817
 818        if (unlikely(ap->excl_link)) {
 819                if (link == ap->excl_link) {
 820                        if (ap->nr_active_links)
 821                                return ATA_DEFER_PORT;
 822                        qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
 823                } else
 824                        return ATA_DEFER_PORT;
 825        } else if (unlikely(is_excl)) {
 826                ap->excl_link = link;
 827                if (ap->nr_active_links)
 828                        return ATA_DEFER_PORT;
 829                qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
 830        }
 831
 832        return ata_std_qc_defer(qc);
 833}
 834
 835static void sil24_qc_prep(struct ata_queued_cmd *qc)
 836{
 837        struct ata_port *ap = qc->ap;
 838        struct sil24_port_priv *pp = ap->private_data;
 839        union sil24_cmd_block *cb;
 840        struct sil24_prb *prb;
 841        struct sil24_sge *sge;
 842        u16 ctrl = 0;
 843
 844        cb = &pp->cmd_block[sil24_tag(qc->tag)];
 845
 846        if (!ata_is_atapi(qc->tf.protocol)) {
 847                prb = &cb->ata.prb;
 848                sge = cb->ata.sge;
 849                if (ata_is_data(qc->tf.protocol)) {
 850                        u16 prot = 0;
 851                        ctrl = PRB_CTRL_PROTOCOL;
 852                        if (ata_is_ncq(qc->tf.protocol))
 853                                prot |= PRB_PROT_NCQ;
 854                        if (qc->tf.flags & ATA_TFLAG_WRITE)
 855                                prot |= PRB_PROT_WRITE;
 856                        else
 857                                prot |= PRB_PROT_READ;
 858                        prb->prot = cpu_to_le16(prot);
 859                }
 860        } else {
 861                prb = &cb->atapi.prb;
 862                sge = cb->atapi.sge;
 863                memset(cb->atapi.cdb, 0, 32);
 864                memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
 865
 866                if (ata_is_data(qc->tf.protocol)) {
 867                        if (qc->tf.flags & ATA_TFLAG_WRITE)
 868                                ctrl = PRB_CTRL_PACKET_WRITE;
 869                        else
 870                                ctrl = PRB_CTRL_PACKET_READ;
 871                }
 872        }
 873
 874        prb->ctrl = cpu_to_le16(ctrl);
 875        ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
 876
 877        if (qc->flags & ATA_QCFLAG_DMAMAP)
 878                sil24_fill_sg(qc, sge);
 879}
 880
 881static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
 882{
 883        struct ata_port *ap = qc->ap;
 884        struct sil24_port_priv *pp = ap->private_data;
 885        void __iomem *port = sil24_port_base(ap);
 886        unsigned int tag = sil24_tag(qc->tag);
 887        dma_addr_t paddr;
 888        void __iomem *activate;
 889
 890        paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
 891        activate = port + PORT_CMD_ACTIVATE + tag * 8;
 892
 893        writel((u32)paddr, activate);
 894        writel((u64)paddr >> 32, activate + 4);
 895
 896        return 0;
 897}
 898
 899static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
 900{
 901        sil24_read_tf(qc->ap, qc->tag, &qc->result_tf);
 902        return true;
 903}
 904
 905static void sil24_pmp_attach(struct ata_port *ap)
 906{
 907        u32 *gscr = ap->link.device->gscr;
 908
 909        sil24_config_pmp(ap, 1);
 910        sil24_init_port(ap);
 911
 912        if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
 913            sata_pmp_gscr_devid(gscr) == 0x4140) {
 914                ata_port_printk(ap, KERN_INFO,
 915                        "disabling NCQ support due to sil24-mv4140 quirk\n");
 916                ap->flags &= ~ATA_FLAG_NCQ;
 917        }
 918}
 919
 920static void sil24_pmp_detach(struct ata_port *ap)
 921{
 922        sil24_init_port(ap);
 923        sil24_config_pmp(ap, 0);
 924
 925        ap->flags |= ATA_FLAG_NCQ;
 926}
 927
 928static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
 929                               unsigned long deadline)
 930{
 931        int rc;
 932
 933        rc = sil24_init_port(link->ap);
 934        if (rc) {
 935                ata_link_printk(link, KERN_ERR,
 936                                "hardreset failed (port not ready)\n");
 937                return rc;
 938        }
 939
 940        return sata_std_hardreset(link, class, deadline);
 941}
 942
 943static void sil24_freeze(struct ata_port *ap)
 944{
 945        void __iomem *port = sil24_port_base(ap);
 946
 947        /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
 948         * PORT_IRQ_ENABLE instead.
 949         */
 950        writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
 951}
 952
 953static void sil24_thaw(struct ata_port *ap)
 954{
 955        void __iomem *port = sil24_port_base(ap);
 956        u32 tmp;
 957
 958        /* clear IRQ */
 959        tmp = readl(port + PORT_IRQ_STAT);
 960        writel(tmp, port + PORT_IRQ_STAT);
 961
 962        /* turn IRQ back on */
 963        writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
 964}
 965
 966static void sil24_error_intr(struct ata_port *ap)
 967{
 968        void __iomem *port = sil24_port_base(ap);
 969        struct sil24_port_priv *pp = ap->private_data;
 970        struct ata_queued_cmd *qc = NULL;
 971        struct ata_link *link;
 972        struct ata_eh_info *ehi;
 973        int abort = 0, freeze = 0;
 974        u32 irq_stat;
 975
 976        /* on error, we need to clear IRQ explicitly */
 977        irq_stat = readl(port + PORT_IRQ_STAT);
 978        writel(irq_stat, port + PORT_IRQ_STAT);
 979
 980        /* first, analyze and record host port events */
 981        link = &ap->link;
 982        ehi = &link->eh_info;
 983        ata_ehi_clear_desc(ehi);
 984
 985        ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
 986
 987        if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
 988                ata_ehi_push_desc(ehi, "SDB notify");
 989                sata_async_notification(ap);
 990        }
 991
 992        if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
 993                ata_ehi_hotplugged(ehi);
 994                ata_ehi_push_desc(ehi, "%s",
 995                                  irq_stat & PORT_IRQ_PHYRDY_CHG ?
 996                                  "PHY RDY changed" : "device exchanged");
 997                freeze = 1;
 998        }
 999
1000        if (irq_stat & PORT_IRQ_UNK_FIS) {
1001                ehi->err_mask |= AC_ERR_HSM;
1002                ehi->action |= ATA_EH_RESET;
1003                ata_ehi_push_desc(ehi, "unknown FIS");
1004                freeze = 1;
1005        }
1006
1007        /* deal with command error */
1008        if (irq_stat & PORT_IRQ_ERROR) {
1009                struct sil24_cerr_info *ci = NULL;
1010                unsigned int err_mask = 0, action = 0;
1011                u32 context, cerr;
1012                int pmp;
1013
1014                abort = 1;
1015
1016                /* DMA Context Switch Failure in Port Multiplier Mode
1017                 * errata.  If we have active commands to 3 or more
1018                 * devices, any error condition on active devices can
1019                 * corrupt DMA context switching.
1020                 */
1021                if (ap->nr_active_links >= 3) {
1022                        ehi->err_mask |= AC_ERR_OTHER;
1023                        ehi->action |= ATA_EH_RESET;
1024                        ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1025                        pp->do_port_rst = 1;
1026                        freeze = 1;
1027                }
1028
1029                /* find out the offending link and qc */
1030                if (sata_pmp_attached(ap)) {
1031                        context = readl(port + PORT_CONTEXT);
1032                        pmp = (context >> 5) & 0xf;
1033
1034                        if (pmp < ap->nr_pmp_links) {
1035                                link = &ap->pmp_link[pmp];
1036                                ehi = &link->eh_info;
1037                                qc = ata_qc_from_tag(ap, link->active_tag);
1038
1039                                ata_ehi_clear_desc(ehi);
1040                                ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1041                                                  irq_stat);
1042                        } else {
1043                                err_mask |= AC_ERR_HSM;
1044                                action |= ATA_EH_RESET;
1045                                freeze = 1;
1046                        }
1047                } else
1048                        qc = ata_qc_from_tag(ap, link->active_tag);
1049
1050                /* analyze CMD_ERR */
1051                cerr = readl(port + PORT_CMD_ERR);
1052                if (cerr < ARRAY_SIZE(sil24_cerr_db))
1053                        ci = &sil24_cerr_db[cerr];
1054
1055                if (ci && ci->desc) {
1056                        err_mask |= ci->err_mask;
1057                        action |= ci->action;
1058                        if (action & ATA_EH_RESET)
1059                                freeze = 1;
1060                        ata_ehi_push_desc(ehi, "%s", ci->desc);
1061                } else {
1062                        err_mask |= AC_ERR_OTHER;
1063                        action |= ATA_EH_RESET;
1064                        freeze = 1;
1065                        ata_ehi_push_desc(ehi, "unknown command error %d",
1066                                          cerr);
1067                }
1068
1069                /* record error info */
1070                if (qc)
1071                        qc->err_mask |= err_mask;
1072                else
1073                        ehi->err_mask |= err_mask;
1074
1075                ehi->action |= action;
1076
1077                /* if PMP, resume */
1078                if (sata_pmp_attached(ap))
1079                        writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1080        }
1081
1082        /* freeze or abort */
1083        if (freeze)
1084                ata_port_freeze(ap);
1085        else if (abort) {
1086                if (qc)
1087                        ata_link_abort(qc->dev->link);
1088                else
1089                        ata_port_abort(ap);
1090        }
1091}
1092
1093static inline void sil24_host_intr(struct ata_port *ap)
1094{
1095        void __iomem *port = sil24_port_base(ap);
1096        u32 slot_stat, qc_active;
1097        int rc;
1098
1099        /* If PCIX_IRQ_WOC, there's an inherent race window between
1100         * clearing IRQ pending status and reading PORT_SLOT_STAT
1101         * which may cause spurious interrupts afterwards.  This is
1102         * unavoidable and much better than losing interrupts which
1103         * happens if IRQ pending is cleared after reading
1104         * PORT_SLOT_STAT.
1105         */
1106        if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1107                writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1108
1109        slot_stat = readl(port + PORT_SLOT_STAT);
1110
1111        if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1112                sil24_error_intr(ap);
1113                return;
1114        }
1115
1116        qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1117        rc = ata_qc_complete_multiple(ap, qc_active);
1118        if (rc > 0)
1119                return;
1120        if (rc < 0) {
1121                struct ata_eh_info *ehi = &ap->link.eh_info;
1122                ehi->err_mask |= AC_ERR_HSM;
1123                ehi->action |= ATA_EH_RESET;
1124                ata_port_freeze(ap);
1125                return;
1126        }
1127
1128        /* spurious interrupts are expected if PCIX_IRQ_WOC */
1129        if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1130                ata_port_printk(ap, KERN_INFO, "spurious interrupt "
1131                        "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1132                        slot_stat, ap->link.active_tag, ap->link.sactive);
1133}
1134
1135static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1136{
1137        struct ata_host *host = dev_instance;
1138        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1139        unsigned handled = 0;
1140        u32 status;
1141        int i;
1142
1143        status = readl(host_base + HOST_IRQ_STAT);
1144
1145        if (status == 0xffffffff) {
1146                printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
1147                       "PCI fault or device removal?\n");
1148                goto out;
1149        }
1150
1151        if (!(status & IRQ_STAT_4PORTS))
1152                goto out;
1153
1154        spin_lock(&host->lock);
1155
1156        for (i = 0; i < host->n_ports; i++)
1157                if (status & (1 << i)) {
1158                        struct ata_port *ap = host->ports[i];
1159                        if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
1160                                sil24_host_intr(ap);
1161                                handled++;
1162                        } else
1163                                printk(KERN_ERR DRV_NAME
1164                                       ": interrupt from disabled port %d\n", i);
1165                }
1166
1167        spin_unlock(&host->lock);
1168 out:
1169        return IRQ_RETVAL(handled);
1170}
1171
1172static void sil24_error_handler(struct ata_port *ap)
1173{
1174        struct sil24_port_priv *pp = ap->private_data;
1175
1176        if (sil24_init_port(ap))
1177                ata_eh_freeze_port(ap);
1178
1179        sata_pmp_error_handler(ap);
1180
1181        pp->do_port_rst = 0;
1182}
1183
1184static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1185{
1186        struct ata_port *ap = qc->ap;
1187
1188        /* make DMA engine forget about the failed command */
1189        if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1190                ata_eh_freeze_port(ap);
1191}
1192
1193static int sil24_port_start(struct ata_port *ap)
1194{
1195        struct device *dev = ap->host->dev;
1196        struct sil24_port_priv *pp;
1197        union sil24_cmd_block *cb;
1198        size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1199        dma_addr_t cb_dma;
1200
1201        pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1202        if (!pp)
1203                return -ENOMEM;
1204
1205        cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1206        if (!cb)
1207                return -ENOMEM;
1208        memset(cb, 0, cb_size);
1209
1210        pp->cmd_block = cb;
1211        pp->cmd_block_dma = cb_dma;
1212
1213        ap->private_data = pp;
1214
1215        ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1216        ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1217
1218        return 0;
1219}
1220
1221static void sil24_init_controller(struct ata_host *host)
1222{
1223        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1224        u32 tmp;
1225        int i;
1226
1227        /* GPIO off */
1228        writel(0, host_base + HOST_FLASH_CMD);
1229
1230        /* clear global reset & mask interrupts during initialization */
1231        writel(0, host_base + HOST_CTRL);
1232
1233        /* init ports */
1234        for (i = 0; i < host->n_ports; i++) {
1235                struct ata_port *ap = host->ports[i];
1236                void __iomem *port = sil24_port_base(ap);
1237
1238
1239                /* Initial PHY setting */
1240                writel(0x20c, port + PORT_PHY_CFG);
1241
1242                /* Clear port RST */
1243                tmp = readl(port + PORT_CTRL_STAT);
1244                if (tmp & PORT_CS_PORT_RST) {
1245                        writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1246                        tmp = ata_wait_register(port + PORT_CTRL_STAT,
1247                                                PORT_CS_PORT_RST,
1248                                                PORT_CS_PORT_RST, 10, 100);
1249                        if (tmp & PORT_CS_PORT_RST)
1250                                dev_printk(KERN_ERR, host->dev,
1251                                           "failed to clear port RST\n");
1252                }
1253
1254                /* configure port */
1255                sil24_config_port(ap);
1256        }
1257
1258        /* Turn on interrupts */
1259        writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1260}
1261
1262static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1263{
1264        extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1265        static int printed_version;
1266        struct ata_port_info pi = sil24_port_info[ent->driver_data];
1267        const struct ata_port_info *ppi[] = { &pi, NULL };
1268        void __iomem * const *iomap;
1269        struct ata_host *host;
1270        int rc;
1271        u32 tmp;
1272
1273        /* cause link error if sil24_cmd_block is sized wrongly */
1274        if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1275                __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1276
1277        if (!printed_version++)
1278                dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
1279
1280        /* acquire resources */
1281        rc = pcim_enable_device(pdev);
1282        if (rc)
1283                return rc;
1284
1285        rc = pcim_iomap_regions(pdev,
1286                                (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1287                                DRV_NAME);
1288        if (rc)
1289                return rc;
1290        iomap = pcim_iomap_table(pdev);
1291
1292        /* apply workaround for completion IRQ loss on PCI-X errata */
1293        if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1294                tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1295                if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1296                        dev_printk(KERN_INFO, &pdev->dev,
1297                                   "Applying completion IRQ loss on PCI-X "
1298                                   "errata fix\n");
1299                else
1300                        pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1301        }
1302
1303        /* allocate and fill host */
1304        host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1305                                    SIL24_FLAG2NPORTS(ppi[0]->flags));
1306        if (!host)
1307                return -ENOMEM;
1308        host->iomap = iomap;
1309
1310        /* configure and activate the device */
1311        if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
1312                rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
1313                if (rc) {
1314                        rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
1315                        if (rc) {
1316                                dev_printk(KERN_ERR, &pdev->dev,
1317                                           "64-bit DMA enable failed\n");
1318                                return rc;
1319                        }
1320                }
1321        } else {
1322                rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
1323                if (rc) {
1324                        dev_printk(KERN_ERR, &pdev->dev,
1325                                   "32-bit DMA enable failed\n");
1326                        return rc;
1327                }
1328                rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
1329                if (rc) {
1330                        dev_printk(KERN_ERR, &pdev->dev,
1331                                   "32-bit consistent DMA enable failed\n");
1332                        return rc;
1333                }
1334        }
1335
1336        /* Set max read request size to 4096.  This slightly increases
1337         * write throughput for pci-e variants.
1338         */
1339        pcie_set_readrq(pdev, 4096);
1340
1341        sil24_init_controller(host);
1342
1343        pci_set_master(pdev);
1344        return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1345                                 &sil24_sht);
1346}
1347
1348#ifdef CONFIG_PM
1349static int sil24_pci_device_resume(struct pci_dev *pdev)
1350{
1351        struct ata_host *host = dev_get_drvdata(&pdev->dev);
1352        void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1353        int rc;
1354
1355        rc = ata_pci_device_do_resume(pdev);
1356        if (rc)
1357                return rc;
1358
1359        if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1360                writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1361
1362        sil24_init_controller(host);
1363
1364        ata_host_resume(host);
1365
1366        return 0;
1367}
1368
1369static int sil24_port_resume(struct ata_port *ap)
1370{
1371        sil24_config_pmp(ap, ap->nr_pmp_links);
1372        return 0;
1373}
1374#endif
1375
1376static int __init sil24_init(void)
1377{
1378        return pci_register_driver(&sil24_pci_driver);
1379}
1380
1381static void __exit sil24_exit(void)
1382{
1383        pci_unregister_driver(&sil24_pci_driver);
1384}
1385
1386MODULE_AUTHOR("Tejun Heo");
1387MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1388MODULE_LICENSE("GPL");
1389MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
1390
1391module_init(sil24_init);
1392module_exit(sil24_exit);
1393
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.