/* linux/arch/arm/mach-s3c2412/clock.c
 *
 * Copyright (c) 2006 Simtec Electronics
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * S3C2412,S3C2413 Clock control support
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*/

#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/sysdev.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/io.h>

#include <asm/mach/map.h>

#include <mach/hardware.h>

#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>

#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/cpu.h>

/* We currently have to assume that the system is running
 * from the XTPll input, and that all ***REFCLKs are being
 * fed from it, as we cannot read the state of OM[4] from
 * software.
 *
 * It would be possible for each board initialisation to
 * set the correct muxing at initialisation
*/

static int s3c2412_clkcon_enable(struct clk *clk, int enable)
{
        unsigned int clocks = clk->ctrlbit;
        unsigned long clkcon;

        clkcon = __raw_readl(S3C2410_CLKCON);

        if (enable)
                clkcon |= clocks;
        else
                clkcon &= ~clocks;

        __raw_writel(clkcon, S3C2410_CLKCON);

        return 0;
}

static int s3c2412_upll_enable(struct clk *clk, int enable)
{
        unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
        unsigned long orig = upllcon;

        if (!enable)
                upllcon |= S3C2412_PLLCON_OFF;
        else
                upllcon &= ~S3C2412_PLLCON_OFF;

        __raw_writel(upllcon, S3C2410_UPLLCON);

        /* allow ~150uS for the PLL to settle and lock */

        if (enable && (orig & S3C2412_PLLCON_OFF))
                udelay(150);

        return 0;
}

/* clock selections */

static struct clk clk_erefclk = {
        .name           = "erefclk",
        .id             = -1,
};

static struct clk clk_urefclk = {
        .name           = "urefclk",
        .id             = -1,
};

static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);

        if (parent == &clk_urefclk)
                clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
        else if (parent == &clk_upll)
                clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
        else
                return -EINVAL;

        clk->parent = parent;

        __raw_writel(clksrc, S3C2412_CLKSRC);
        return 0;
}

static struct clk clk_usysclk = {
        .name           = "usysclk",
        .id             = -1,
        .parent         = &clk_xtal,
        .set_parent     = s3c2412_setparent_usysclk,
};

static struct clk clk_mrefclk = {
        .name           = "mrefclk",
        .parent         = &clk_xtal,
        .id             = -1,
};

static struct clk clk_mdivclk = {
        .name           = "mdivclk",
        .parent         = &clk_xtal,
        .id             = -1,
};

static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);

        if (parent == &clk_usysclk)
                clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
        else if (parent == &clk_h)
                clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
        else
                return -EINVAL;

        clk->parent = parent;

        __raw_writel(clksrc, S3C2412_CLKSRC);
        return 0;
}

static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
                                              unsigned long rate)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        int div;

        if (rate > parent_rate)
                return parent_rate;

        div = parent_rate / rate;
        if (div > 2)
                div = 2;

        return parent_rate / div;
}

static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long div = __raw_readl(S3C2410_CLKDIVN);

        return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
}

static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);

        rate = s3c2412_roundrate_usbsrc(clk, rate);

        if ((parent_rate / rate) == 2)
                clkdivn |= S3C2412_CLKDIVN_USB48DIV;
        else
                clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;

        __raw_writel(clkdivn, S3C2410_CLKDIVN);
        return 0;
}

static struct clk clk_usbsrc = {
        .name           = "usbsrc",
        .id             = -1,
        .get_rate       = s3c2412_getrate_usbsrc,
        .set_rate       = s3c2412_setrate_usbsrc,
        .round_rate     = s3c2412_roundrate_usbsrc,
        .set_parent     = s3c2412_setparent_usbsrc,
};

static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);

        if (parent == &clk_mdivclk)
                clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
        else if (parent == &clk_mpll)
                clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
        else
                return -EINVAL;

        clk->parent = parent;

        __raw_writel(clksrc, S3C2412_CLKSRC);
        return 0;
}

static struct clk clk_msysclk = {
        .name           = "msysclk",
        .id             = -1,
        .set_parent     = s3c2412_setparent_msysclk,
};

static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
{
        unsigned long flags;
        unsigned long clkdiv;
        unsigned long dvs;

        /* Note, we current equate fclk andf msysclk for S3C2412 */

        if (parent == &clk_msysclk || parent == &clk_f)
                dvs = 0;
        else if (parent == &clk_h)
                dvs = S3C2412_CLKDIVN_DVSEN;
        else
                return -EINVAL;

        clk->parent = parent;

        /* update this under irq lockdown, clkdivn is not protected
         * by the clock system. */

        local_irq_save(flags);

        clkdiv  = __raw_readl(S3C2410_CLKDIVN);
        clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
        clkdiv |= dvs;
        __raw_writel(clkdiv, S3C2410_CLKDIVN);

        local_irq_restore(flags);

        return 0;
}

static struct clk clk_armclk = {
        .name           = "armclk",
        .id             = -1,
        .parent         = &clk_msysclk,
        .set_parent     = s3c2412_setparent_armclk,
};

/* these next clocks have an divider immediately after them,
 * so we can register them with their divider and leave out the
 * intermediate clock stage
*/
static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
                                              unsigned long rate)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        int div;

        if (rate > parent_rate)
                return parent_rate;

        /* note, we remove the +/- 1 calculations as they cancel out */

        div = (rate / parent_rate);

        if (div < 1)
                div = 1;
        else if (div > 16)
                div = 16;

        return parent_rate / div;
}

static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);

        if (parent == &clk_erefclk)
                clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
        else if (parent == &clk_mpll)
                clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
        else
                return -EINVAL;

        clk->parent = parent;

        __raw_writel(clksrc, S3C2412_CLKSRC);
        return 0;
}

static unsigned long s3c2412_getrate_uart(struct clk *clk)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long div = __raw_readl(S3C2410_CLKDIVN);

        div &= S3C2412_CLKDIVN_UARTDIV_MASK;
        div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;

        return parent_rate / (div + 1);
}

static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);

        rate = s3c2412_roundrate_clksrc(clk, rate);

        clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
        clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;

        __raw_writel(clkdivn, S3C2410_CLKDIVN);
        return 0;
}

static struct clk clk_uart = {
        .name           = "uartclk",
        .id             = -1,
        .get_rate       = s3c2412_getrate_uart,
        .set_rate       = s3c2412_setrate_uart,
        .set_parent     = s3c2412_setparent_uart,
        .round_rate     = s3c2412_roundrate_clksrc,
};

static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);

        if (parent == &clk_erefclk)
                clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
        else if (parent == &clk_mpll)
                clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
        else
                return -EINVAL;

        clk->parent = parent;

        __raw_writel(clksrc, S3C2412_CLKSRC);
        return 0;
}

static unsigned long s3c2412_getrate_i2s(struct clk *clk)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long div = __raw_readl(S3C2410_CLKDIVN);

        div &= S3C2412_CLKDIVN_I2SDIV_MASK;
        div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;

        return parent_rate / (div + 1);
}

static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);

        rate = s3c2412_roundrate_clksrc(clk, rate);

        clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
        clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;

        __raw_writel(clkdivn, S3C2410_CLKDIVN);
        return 0;
}

static struct clk clk_i2s = {
        .name           = "i2sclk",
        .id             = -1,
        .get_rate       = s3c2412_getrate_i2s,
        .set_rate       = s3c2412_setrate_i2s,
        .set_parent     = s3c2412_setparent_i2s,
        .round_rate     = s3c2412_roundrate_clksrc,
};

static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);

        if (parent == &clk_usysclk)
                clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
        else if (parent == &clk_h)
                clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
        else
                return -EINVAL;

        clk->parent = parent;

        __raw_writel(clksrc, S3C2412_CLKSRC);
        return 0;
}
static unsigned long s3c2412_getrate_cam(struct clk *clk)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long div = __raw_readl(S3C2410_CLKDIVN);

        div &= S3C2412_CLKDIVN_CAMDIV_MASK;
        div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;

        return parent_rate / (div + 1);
}

static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
{
        unsigned long parent_rate = clk_get_rate(clk->parent);
        unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);

        rate = s3c2412_roundrate_clksrc(clk, rate);

        clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
        clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;

        __raw_writel(clkdivn, S3C2410_CLKDIVN);
        return 0;
}

static struct clk clk_cam = {
        .name           = "camif-upll", /* same as 2440 name */
        .id             = -1,
        .get_rate       = s3c2412_getrate_cam,
        .set_rate       = s3c2412_setrate_cam,
        .set_parent     = s3c2412_setparent_cam,
        .round_rate     = s3c2412_roundrate_clksrc,
};

/* standard clock definitions */

static struct clk init_clocks_disable[] = {
        {
                .name           = "nand",
                .id             = -1,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_NAND,
        }, {
                .name           = "sdi",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_SDI,
        }, {
                .name           = "adc",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_ADC,
        }, {
                .name           = "i2c",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_IIC,
        }, {
                .name           = "iis",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_IIS,
        }, {
                .name           = "spi",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_SPI,
        }
};

static struct clk init_clocks[] = {
        {
                .name           = "dma",
                .id             = 0,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_DMA0,
        }, {
                .name           = "dma",
                .id             = 1,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_DMA1,
        }, {
                .name           = "dma",
                .id             = 2,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_DMA2,
        }, {
                .name           = "dma",
                .id             = 3,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_DMA3,
        }, {
                .name           = "lcd",
                .id             = -1,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_LCDC,
        }, {
                .name           = "gpio",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_GPIO,
        }, {
                .name           = "usb-host",
                .id             = -1,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_USBH,
        }, {
                .name           = "usb-device",
                .id             = -1,
                .parent         = &clk_h,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_USBD,
        }, {
                .name           = "timers",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_PWMT,
        }, {
                .name           = "uart",
                .id             = 0,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_UART0,
        }, {
                .name           = "uart",
                .id             = 1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_UART1,
        }, {
                .name           = "uart",
                .id             = 2,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_UART2,
        }, {
                .name           = "rtc",
                .id             = -1,
                .parent         = &clk_p,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_RTC,
        }, {
                .name           = "watchdog",
                .id             = -1,
                .parent         = &clk_p,
                .ctrlbit        = 0,
        }, {
                .name           = "usb-bus-gadget",
                .id             = -1,
                .parent         = &clk_usb_bus,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_USB_DEV48,
        }, {
                .name           = "usb-bus-host",
                .id             = -1,
                .parent         = &clk_usb_bus,
                .enable         = s3c2412_clkcon_enable,
                .ctrlbit        = S3C2412_CLKCON_USB_HOST48,
        }
};

/* clocks to add where we need to check their parentage */

struct clk_init {
        struct clk      *clk;
        unsigned int     bit;
        struct clk      *src_0;
        struct clk      *src_1;
};

static struct clk_init clks_src[] __initdata = {
        {
                .clk    = &clk_usysclk,
                .bit    = S3C2412_CLKSRC_USBCLK_HCLK,
                .src_0  = &clk_urefclk,
                .src_1  = &clk_upll,
        }, {
                .clk    = &clk_i2s,
                .bit    = S3C2412_CLKSRC_I2SCLK_MPLL,
                .src_0  = &clk_erefclk,
                .src_1  = &clk_mpll,
        }, {
                .clk    = &clk_cam,
                .bit    = S3C2412_CLKSRC_CAMCLK_HCLK,
                .src_0  = &clk_usysclk,
                .src_1  = &clk_h,
        }, {
                .clk    = &clk_msysclk,
                .bit    = S3C2412_CLKSRC_MSYSCLK_MPLL,
                .src_0  = &clk_mdivclk,
                .src_1  = &clk_mpll,
        }, {
                .clk    = &clk_uart,
                .bit    = S3C2412_CLKSRC_UARTCLK_MPLL,
                .src_0  = &clk_erefclk,
                .src_1  = &clk_mpll,
        }, {
                .clk    = &clk_usbsrc,
                .bit    = S3C2412_CLKSRC_USBCLK_HCLK,
                .src_0  = &clk_usysclk,
                .src_1  = &clk_h,
        /* here we assume  OM[4] select xtal */
        }, {
                .clk    = &clk_erefclk,
                .bit    = S3C2412_CLKSRC_EREFCLK_EXTCLK,
                .src_0  = &clk_xtal,
                .src_1  = &clk_ext,
        }, {
                .clk    = &clk_urefclk,
                .bit    = S3C2412_CLKSRC_UREFCLK_EXTCLK,
                .src_0  = &clk_xtal,
                .src_1  = &clk_ext,
        },
};

/* s3c2412_clk_initparents
 *
 * Initialise the parents for the clocks that we get at start-time
*/

static void __init s3c2412_clk_initparents(void)
{
        unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
        struct clk_init *cip = clks_src;
        struct clk *src;
        int ptr;
        int ret;

        for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
                ret = s3c24xx_register_clock(cip->clk);
                if (ret < 0) {
                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
                               cip->clk->name, ret);
                }

                src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;

                printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
                clk_set_parent(cip->clk, src);
        }
}

/* clocks to add straight away */

static struct clk *clks[] __initdata = {
        &clk_ext,
        &clk_usb_bus,
        &clk_mrefclk,
        &clk_armclk,
};

int __init s3c2412_baseclk_add(void)
{
        unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
        unsigned int dvs;
        struct clk *clkp;
        int ret;
        int ptr;

        clk_upll.enable = s3c2412_upll_enable;
        clk_usb_bus.parent = &clk_usbsrc;
        clk_usb_bus.rate = 0x0;

        clk_f.parent = &clk_msysclk;

        s3c2412_clk_initparents();

        for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
                clkp = clks[ptr];

                ret = s3c24xx_register_clock(clkp);
                if (ret < 0) {
                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
                               clkp->name, ret);
                }
        }

        /* set the dvs state according to what we got at boot time */

        dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;

        if (dvs)
                clk_armclk.parent = &clk_h;

        printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");

        /* ensure usb bus clock is within correct rate of 48MHz */

        if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
                printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");

                /* for the moment, let's use the UPLL, and see if we can
                 * get 48MHz */

                clk_set_parent(&clk_usysclk, &clk_upll);
                clk_set_parent(&clk_usbsrc, &clk_usysclk);
                clk_set_rate(&clk_usbsrc, 48*1000*1000);
        }

        printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
               (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
               print_mhz(clk_get_rate(&clk_upll)),
               print_mhz(clk_get_rate(&clk_usb_bus)));

        /* register clocks from clock array */

        clkp = init_clocks;
        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
                /* ensure that we note the clock state */

                clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;

                ret = s3c24xx_register_clock(clkp);
                if (ret < 0) {
                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
                               clkp->name, ret);
                }
        }

        /* We must be careful disabling the clocks we are not intending to
         * be using at boot time, as subsystems such as the LCD which do
         * their own DMA requests to the bus can cause the system to lockup
         * if they where in the middle of requesting bus access.
         *
         * Disabling the LCD clock if the LCD is active is very dangerous,
         * and therefore the bootloader should be careful to not enable
         * the LCD clock if it is not needed.
        */

        /* install (and disable) the clocks we do not need immediately */

        clkp = init_clocks_disable;
        for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {

                ret = s3c24xx_register_clock(clkp);
                if (ret < 0) {
                        printk(KERN_ERR "Failed to register clock %s (%d)\n",
                               clkp->name, ret);
                }

                s3c2412_clkcon_enable(clkp, 0);
        }

        s3c_pwmclk_init();
        return 0;
}