linux/arch/arm/mach-iop32x/glantank.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-iop32x/glantank.c
   3 *
   4 * Board support code for the GLAN Tank.
   5 *
   6 * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
   7 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
   8 *
   9 * This program is free software; you can redistribute it and/or modify it
  10 * under the terms of the GNU General Public License as published by the
  11 * Free Software Foundation; either version 2 of the License, or (at your
  12 * option) any later version.
  13 */
  14
  15#include <linux/mm.h>
  16#include <linux/init.h>
  17#include <linux/f75375s.h>
  18#include <linux/kernel.h>
  19#include <linux/pci.h>
  20#include <linux/pm.h>
  21#include <linux/string.h>
  22#include <linux/slab.h>
  23#include <linux/serial_core.h>
  24#include <linux/serial_8250.h>
  25#include <linux/mtd/physmap.h>
  26#include <linux/i2c.h>
  27#include <linux/platform_device.h>
  28#include <linux/io.h>
  29#include <mach/hardware.h>
  30#include <asm/irq.h>
  31#include <asm/mach/arch.h>
  32#include <asm/mach/map.h>
  33#include <asm/mach/pci.h>
  34#include <asm/mach/time.h>
  35#include <asm/mach-types.h>
  36#include <asm/page.h>
  37#include <mach/time.h>
  38
  39/*
  40 * GLAN Tank timer tick configuration.
  41 */
  42static void __init glantank_timer_init(void)
  43{
  44        /* 33.333 MHz crystal.  */
  45        iop_init_time(200000000);
  46}
  47
  48static struct sys_timer glantank_timer = {
  49        .init           = glantank_timer_init,
  50        .offset         = iop_gettimeoffset,
  51};
  52
  53
  54/*
  55 * GLAN Tank I/O.
  56 */
  57static struct map_desc glantank_io_desc[] __initdata = {
  58        {       /* on-board devices */
  59                .virtual        = GLANTANK_UART,
  60                .pfn            = __phys_to_pfn(GLANTANK_UART),
  61                .length         = 0x00100000,
  62                .type           = MT_DEVICE
  63        },
  64};
  65
  66void __init glantank_map_io(void)
  67{
  68        iop3xx_map_io();
  69        iotable_init(glantank_io_desc, ARRAY_SIZE(glantank_io_desc));
  70}
  71
  72
  73/*
  74 * GLAN Tank PCI.
  75 */
  76#define INTA    IRQ_IOP32X_XINT0
  77#define INTB    IRQ_IOP32X_XINT1
  78#define INTC    IRQ_IOP32X_XINT2
  79#define INTD    IRQ_IOP32X_XINT3
  80
  81static int __init
  82glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
  83{
  84        static int pci_irq_table[][4] = {
  85                /*
  86                 * PCI IDSEL/INTPIN->INTLINE
  87                 * A       B       C       D
  88                 */
  89                {INTD, INTD, INTD, INTD}, /* UART (8250) */
  90                {INTA, INTA, INTA, INTA}, /* Ethernet (E1000) */
  91                {INTB, INTB, INTB, INTB}, /* IDE (AEC6280R) */
  92                {INTC, INTC, INTC, INTC}, /* USB (NEC) */
  93        };
  94
  95        BUG_ON(pin < 1 || pin > 4);
  96
  97        return pci_irq_table[slot % 4][pin - 1];
  98}
  99
 100static struct hw_pci glantank_pci __initdata = {
 101        .swizzle        = pci_std_swizzle,
 102        .nr_controllers = 1,
 103        .setup          = iop3xx_pci_setup,
 104        .preinit        = iop3xx_pci_preinit,
 105        .scan           = iop3xx_pci_scan_bus,
 106        .map_irq        = glantank_pci_map_irq,
 107};
 108
 109static int __init glantank_pci_init(void)
 110{
 111        if (machine_is_glantank())
 112                pci_common_init(&glantank_pci);
 113
 114        return 0;
 115}
 116
 117subsys_initcall(glantank_pci_init);
 118
 119
 120/*
 121 * GLAN Tank machine initialization.
 122 */
 123static struct physmap_flash_data glantank_flash_data = {
 124        .width          = 2,
 125};
 126
 127static struct resource glantank_flash_resource = {
 128        .start          = 0xf0000000,
 129        .end            = 0xf007ffff,
 130        .flags          = IORESOURCE_MEM,
 131};
 132
 133static struct platform_device glantank_flash_device = {
 134        .name           = "physmap-flash",
 135        .id             = 0,
 136        .dev            = {
 137                .platform_data  = &glantank_flash_data,
 138        },
 139        .num_resources  = 1,
 140        .resource       = &glantank_flash_resource,
 141};
 142
 143static struct plat_serial8250_port glantank_serial_port[] = {
 144        {
 145                .mapbase        = GLANTANK_UART,
 146                .membase        = (char *)GLANTANK_UART,
 147                .irq            = IRQ_IOP32X_XINT3,
 148                .flags          = UPF_SKIP_TEST,
 149                .iotype         = UPIO_MEM,
 150                .regshift       = 0,
 151                .uartclk        = 1843200,
 152        },
 153        { },
 154};
 155
 156static struct resource glantank_uart_resource = {
 157        .start          = GLANTANK_UART,
 158        .end            = GLANTANK_UART + 7,
 159        .flags          = IORESOURCE_MEM,
 160};
 161
 162static struct platform_device glantank_serial_device = {
 163        .name           = "serial8250",
 164        .id             = PLAT8250_DEV_PLATFORM,
 165        .dev            = {
 166                .platform_data          = glantank_serial_port,
 167        },
 168        .num_resources  = 1,
 169        .resource       = &glantank_uart_resource,
 170};
 171
 172static struct f75375s_platform_data glantank_f75375s = {
 173        .pwm            = { 255, 255 },
 174        .pwm_enable     = { 0, 0 },
 175};
 176
 177static struct i2c_board_info __initdata glantank_i2c_devices[] = {
 178        {
 179                I2C_BOARD_INFO("rs5c372a", 0x32),
 180        },
 181        {
 182                I2C_BOARD_INFO("f75375", 0x2e),
 183                .platform_data = &glantank_f75375s,
 184        },
 185};
 186
 187static void glantank_power_off(void)
 188{
 189        __raw_writeb(0x01, 0xfe8d0004);
 190
 191        while (1)
 192                ;
 193}
 194
 195static void __init glantank_init_machine(void)
 196{
 197        platform_device_register(&iop3xx_i2c0_device);
 198        platform_device_register(&iop3xx_i2c1_device);
 199        platform_device_register(&glantank_flash_device);
 200        platform_device_register(&glantank_serial_device);
 201        platform_device_register(&iop3xx_dma_0_channel);
 202        platform_device_register(&iop3xx_dma_1_channel);
 203
 204        i2c_register_board_info(0, glantank_i2c_devices,
 205                ARRAY_SIZE(glantank_i2c_devices));
 206
 207        pm_power_off = glantank_power_off;
 208}
 209
 210MACHINE_START(GLANTANK, "GLAN Tank")
 211        /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 212        .phys_io        = GLANTANK_UART,
 213        .io_pg_offst    = ((GLANTANK_UART) >> 18) & 0xfffc,
 214        .boot_params    = 0xa0000100,
 215        .map_io         = glantank_map_io,
 216        .init_irq       = iop32x_init_irq,
 217        .timer          = &glantank_timer,
 218        .init_machine   = glantank_init_machine,
 219MACHINE_END
 220
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.