linux/arch/arm/mach-stmp378x/stmp378x_devb.c
<<
>>
Prefs
   1/*
   2 * Freescale STMP378X development board support
   3 *
   4 * Embedded Alley Solutions, Inc <source@embeddedalley.com>
   5 *
   6 * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
   7 * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
   8 */
   9
  10/*
  11 * The code contained herein is licensed under the GNU General Public
  12 * License. You may obtain a copy of the GNU General Public License
  13 * Version 2 or later at the following locations:
  14 *
  15 * http://www.opensource.org/licenses/gpl-license.html
  16 * http://www.gnu.org/copyleft/gpl.html
  17 */
  18#include <linux/kernel.h>
  19#include <linux/init.h>
  20#include <linux/io.h>
  21#include <linux/platform_device.h>
  22#include <linux/delay.h>
  23#include <linux/clk.h>
  24#include <linux/err.h>
  25#include <linux/spi/spi.h>
  26
  27#include <asm/setup.h>
  28#include <asm/mach-types.h>
  29#include <asm/mach/arch.h>
  30
  31#include <mach/pins.h>
  32#include <mach/pinmux.h>
  33#include <mach/platform.h>
  34#include <mach/stmp3xxx.h>
  35#include <mach/mmc.h>
  36#include <mach/gpmi.h>
  37
  38#include "stmp378x.h"
  39
  40static struct platform_device *devices[] = {
  41        &stmp3xxx_dbguart,
  42        &stmp3xxx_appuart,
  43        &stmp3xxx_watchdog,
  44        &stmp3xxx_touchscreen,
  45        &stmp3xxx_rtc,
  46        &stmp3xxx_keyboard,
  47        &stmp3xxx_framebuffer,
  48        &stmp3xxx_backlight,
  49        &stmp3xxx_rotdec,
  50        &stmp3xxx_persistent,
  51        &stmp3xxx_dcp_bootstream,
  52        &stmp3xxx_dcp,
  53        &stmp3xxx_battery,
  54        &stmp378x_pxp,
  55        &stmp378x_i2c,
  56};
  57
  58static struct pin_desc i2c_pins_desc[] = {
  59        { PINID_I2C_SCL, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
  60        { PINID_I2C_SDA, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
  61};
  62
  63static struct pin_group i2c_pins = {
  64        .pins           = i2c_pins_desc,
  65        .nr_pins        = ARRAY_SIZE(i2c_pins_desc),
  66};
  67
  68static struct pin_desc dbguart_pins_0[] = {
  69        { PINID_PWM0, PIN_FUN3, },
  70        { PINID_PWM1, PIN_FUN3, },
  71};
  72
  73static struct pin_group dbguart_pins[] = {
  74        [0] = {
  75                .pins           = dbguart_pins_0,
  76                .nr_pins        = ARRAY_SIZE(dbguart_pins_0),
  77        },
  78};
  79
  80static int dbguart_pins_control(int id, int request)
  81{
  82        int r = 0;
  83
  84        if (request)
  85                r = stmp3xxx_request_pin_group(&dbguart_pins[id], "debug uart");
  86        else
  87                stmp3xxx_release_pin_group(&dbguart_pins[id], "debug uart");
  88        return r;
  89}
  90
  91static struct pin_desc appuart_pins_0[] = {
  92        { PINID_AUART1_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
  93        { PINID_AUART1_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
  94        { PINID_AUART1_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
  95        { PINID_AUART1_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
  96};
  97
  98static struct pin_desc appuart_pins_1[] = {
  99#if 0 /* enable these when second appuart will be connected */
 100        { PINID_AUART2_CTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
 101        { PINID_AUART2_RTS, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
 102        { PINID_AUART2_RX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
 103        { PINID_AUART2_TX, PIN_FUN1, PIN_4MA, PIN_1_8V, 0, },
 104#endif
 105};
 106
 107static struct pin_desc mmc_pins_desc[] = {
 108        { PINID_SSP1_DATA0, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
 109        { PINID_SSP1_DATA1, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
 110        { PINID_SSP1_DATA2, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
 111        { PINID_SSP1_DATA3, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
 112        { PINID_SSP1_CMD, PIN_FUN1, PIN_8MA, PIN_3_3V, 1 },
 113        { PINID_SSP1_SCK, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
 114        { PINID_SSP1_DETECT, PIN_FUN1, PIN_8MA, PIN_3_3V, 0 },
 115};
 116
 117static struct pin_group mmc_pins = {
 118        .pins           = mmc_pins_desc,
 119        .nr_pins        = ARRAY_SIZE(mmc_pins_desc),
 120};
 121
 122static int stmp3xxxmmc_get_wp(void)
 123{
 124        return gpio_get_value(PINID_PWM4);
 125}
 126
 127static int stmp3xxxmmc_hw_init_ssp1(void)
 128{
 129        int ret;
 130
 131        ret = stmp3xxx_request_pin_group(&mmc_pins, "mmc");
 132        if (ret)
 133                goto out;
 134
 135        /* Configure write protect GPIO pin */
 136        ret = gpio_request(PINID_PWM4, "mmc wp");
 137        if (ret)
 138                goto out_wp;
 139
 140        gpio_direction_input(PINID_PWM4);
 141
 142        /* Configure POWER pin as gpio to drive power to MMC slot */
 143        ret = gpio_request(PINID_PWM3, "mmc power");
 144        if (ret)
 145                goto out_power;
 146
 147        gpio_direction_output(PINID_PWM3, 0);
 148        mdelay(100);
 149
 150        return 0;
 151
 152out_power:
 153        gpio_free(PINID_PWM4);
 154out_wp:
 155        stmp3xxx_release_pin_group(&mmc_pins, "mmc");
 156out:
 157        return ret;
 158}
 159
 160static void stmp3xxxmmc_hw_release_ssp1(void)
 161{
 162        gpio_free(PINID_PWM3);
 163        gpio_free(PINID_PWM4);
 164        stmp3xxx_release_pin_group(&mmc_pins, "mmc");
 165}
 166
 167static void stmp3xxxmmc_cmd_pullup_ssp1(int enable)
 168{
 169        stmp3xxx_pin_pullup(PINID_SSP1_CMD, enable, "mmc");
 170}
 171
 172static unsigned long
 173stmp3xxxmmc_setclock_ssp1(void __iomem *base, unsigned long hz)
 174{
 175        struct clk *ssp, *parent;
 176        char *p;
 177        long r;
 178
 179        ssp = clk_get(NULL, "ssp");
 180
 181        /* using SSP1, no timeout, clock rate 1 */
 182        writel(BF(2, SSP_TIMING_CLOCK_DIVIDE) |
 183               BF(0xFFFF, SSP_TIMING_TIMEOUT),
 184               base + HW_SSP_TIMING);
 185
 186        p = (hz > 1000000) ? "io" : "osc_24M";
 187        parent = clk_get(NULL, p);
 188        clk_set_parent(ssp, parent);
 189        r = clk_set_rate(ssp, 2 * hz / 1000);
 190        clk_put(parent);
 191        clk_put(ssp);
 192
 193        return hz;
 194}
 195
 196static struct stmp3xxxmmc_platform_data mmc_data = {
 197        .hw_init        = stmp3xxxmmc_hw_init_ssp1,
 198        .hw_release     = stmp3xxxmmc_hw_release_ssp1,
 199        .get_wp         = stmp3xxxmmc_get_wp,
 200        .cmd_pullup     = stmp3xxxmmc_cmd_pullup_ssp1,
 201        .setclock       = stmp3xxxmmc_setclock_ssp1,
 202};
 203
 204
 205static struct pin_group appuart_pins[] = {
 206        [0] = {
 207                .pins           = appuart_pins_0,
 208                .nr_pins        = ARRAY_SIZE(appuart_pins_0),
 209        },
 210        [1] = {
 211                .pins           = appuart_pins_1,
 212                .nr_pins        = ARRAY_SIZE(appuart_pins_1),
 213        },
 214};
 215
 216static struct pin_desc ssp1_pins_desc[] = {
 217        { PINID_SSP1_SCK,       PIN_FUN1, PIN_8MA, PIN_3_3V, 0, },
 218        { PINID_SSP1_CMD,       PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
 219        { PINID_SSP1_DATA0,     PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
 220        { PINID_SSP1_DATA3,     PIN_FUN1, PIN_4MA, PIN_3_3V, 0, },
 221};
 222
 223static struct pin_desc ssp2_pins_desc[] = {
 224        { PINID_GPMI_WRN,       PIN_FUN3, PIN_8MA, PIN_3_3V, 0, },
 225        { PINID_GPMI_RDY1,      PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
 226        { PINID_GPMI_D00,       PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
 227        { PINID_GPMI_D03,       PIN_FUN3, PIN_4MA, PIN_3_3V, 0, },
 228};
 229
 230static struct pin_group ssp1_pins = {
 231        .pins = ssp1_pins_desc,
 232        .nr_pins = ARRAY_SIZE(ssp1_pins_desc),
 233};
 234
 235static struct pin_group ssp2_pins = {
 236        .pins = ssp1_pins_desc,
 237        .nr_pins = ARRAY_SIZE(ssp2_pins_desc),
 238};
 239
 240static struct pin_desc gpmi_pins_desc[] = {
 241        { PINID_GPMI_CE0N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 242        { PINID_GPMI_CE1N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 243        { PINID_GMPI_CE2N, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 244        { PINID_GPMI_CLE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 245        { PINID_GPMI_ALE, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 246        { PINID_GPMI_WPN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
 247        { PINID_GPMI_RDY1, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 248        { PINID_GPMI_D00, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 249        { PINID_GPMI_D01, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 250        { PINID_GPMI_D02, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 251        { PINID_GPMI_D03, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 252        { PINID_GPMI_D04, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 253        { PINID_GPMI_D05, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 254        { PINID_GPMI_D06, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 255        { PINID_GPMI_D07, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 256        { PINID_GPMI_RDY0, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 257        { PINID_GPMI_RDY2, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 258        { PINID_GPMI_RDY3, PIN_FUN1, PIN_4MA, PIN_3_3V, 0 },
 259        { PINID_GPMI_WRN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
 260        { PINID_GPMI_RDN, PIN_FUN1, PIN_12MA, PIN_3_3V, 0 },
 261};
 262
 263static struct pin_group gpmi_pins = {
 264        .pins           = gpmi_pins_desc,
 265        .nr_pins        = ARRAY_SIZE(gpmi_pins_desc),
 266};
 267
 268static struct mtd_partition gpmi_partitions[] = {
 269        [0] = {
 270                .name   = "boot",
 271                .size   = 10 * SZ_1M,
 272                .offset = 0,
 273        },
 274        [1] = {
 275                .name   = "data",
 276                .size   = MTDPART_SIZ_FULL,
 277                .offset = MTDPART_OFS_APPEND,
 278        },
 279};
 280
 281static struct gpmi_platform_data gpmi_data = {
 282        .pins = &gpmi_pins,
 283        .nr_parts = ARRAY_SIZE(gpmi_partitions),
 284        .parts = gpmi_partitions,
 285        .part_types = { "cmdline", NULL },
 286};
 287
 288static struct spi_board_info spi_board_info[] __initdata = {
 289#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 290        {
 291                .modalias       = "enc28j60",
 292                .max_speed_hz   = 6 * 1000 * 1000,
 293                .bus_num        = 1,
 294                .chip_select    = 0,
 295                .platform_data  = NULL,
 296        },
 297#endif
 298};
 299
 300static void __init stmp378x_devb_init(void)
 301{
 302        stmp3xxx_pinmux_init(NR_REAL_IRQS);
 303
 304        /* init stmp3xxx platform */
 305        stmp3xxx_init();
 306
 307        stmp3xxx_dbguart.dev.platform_data = dbguart_pins_control;
 308        stmp3xxx_appuart.dev.platform_data = appuart_pins;
 309        stmp3xxx_mmc.dev.platform_data = &mmc_data;
 310        stmp3xxx_gpmi.dev.platform_data = &gpmi_data;
 311        stmp3xxx_spi1.dev.platform_data = &ssp1_pins;
 312        stmp3xxx_spi2.dev.platform_data = &ssp2_pins;
 313        stmp378x_i2c.dev.platform_data = &i2c_pins;
 314
 315        /* register spi devices */
 316        spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 317
 318        /* add board's devices */
 319        platform_add_devices(devices, ARRAY_SIZE(devices));
 320
 321        /* add devices selected by command line ssp1= and ssp2= options */
 322        stmp3xxx_ssp1_device_register();
 323        stmp3xxx_ssp2_device_register();
 324}
 325
 326MACHINE_START(STMP378X, "STMP378X")
 327        .phys_io        = 0x80000000,
 328        .io_pg_offst    = ((0xf0000000) >> 18) & 0xfffc,
 329        .boot_params    = 0x40000100,
 330        .map_io         = stmp378x_map_io,
 331        .init_irq       = stmp378x_init_irq,
 332        .timer          = &stmp3xxx_timer,
 333        .init_machine   = stmp378x_devb_init,
 334MACHINE_END
 335
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.