linux/drivers/scsi/qla2xxx/qla_mid.c
<<
>>
Prefs
   1/*
   2 * QLogic Fibre Channel HBA Driver
   3 * Copyright (c)  2003-2008 QLogic Corporation
   4 *
   5 * See LICENSE.qla2xxx for copyright and licensing details.
   6 */
   7#include "qla_def.h"
   8#include "qla_gbl.h"
   9
  10#include <linux/moduleparam.h>
  11#include <linux/vmalloc.h>
  12#include <linux/smp_lock.h>
  13#include <linux/list.h>
  14
  15#include <scsi/scsi_tcq.h>
  16#include <scsi/scsicam.h>
  17#include <linux/delay.h>
  18
  19void
  20qla2x00_vp_stop_timer(scsi_qla_host_t *vha)
  21{
  22        if (vha->vp_idx && vha->timer_active) {
  23                del_timer_sync(&vha->timer);
  24                vha->timer_active = 0;
  25        }
  26}
  27
  28static uint32_t
  29qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
  30{
  31        uint32_t vp_id;
  32        struct qla_hw_data *ha = vha->hw;
  33
  34        /* Find an empty slot and assign an vp_id */
  35        mutex_lock(&ha->vport_lock);
  36        vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
  37        if (vp_id > ha->max_npiv_vports) {
  38                DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
  39                    vp_id, ha->max_npiv_vports));
  40                mutex_unlock(&ha->vport_lock);
  41                return vp_id;
  42        }
  43
  44        set_bit(vp_id, ha->vp_idx_map);
  45        ha->num_vhosts++;
  46        ha->cur_vport_count++;
  47        vha->vp_idx = vp_id;
  48        list_add_tail(&vha->list, &ha->vp_list);
  49        mutex_unlock(&ha->vport_lock);
  50        return vp_id;
  51}
  52
  53void
  54qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
  55{
  56        uint16_t vp_id;
  57        struct qla_hw_data *ha = vha->hw;
  58
  59        mutex_lock(&ha->vport_lock);
  60        vp_id = vha->vp_idx;
  61        ha->num_vhosts--;
  62        ha->cur_vport_count--;
  63        clear_bit(vp_id, ha->vp_idx_map);
  64        list_del(&vha->list);
  65        mutex_unlock(&ha->vport_lock);
  66}
  67
  68static scsi_qla_host_t *
  69qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
  70{
  71        scsi_qla_host_t *vha;
  72        struct scsi_qla_host *tvha;
  73
  74        /* Locate matching device in database. */
  75        list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
  76                if (!memcmp(port_name, vha->port_name, WWN_SIZE))
  77                        return vha;
  78        }
  79        return NULL;
  80}
  81
  82/*
  83 * qla2x00_mark_vp_devices_dead
  84 *      Updates fcport state when device goes offline.
  85 *
  86 * Input:
  87 *      ha = adapter block pointer.
  88 *      fcport = port structure pointer.
  89 *
  90 * Return:
  91 *      None.
  92 *
  93 * Context:
  94 */
  95static void
  96qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
  97{
  98        fc_port_t *fcport;
  99
 100        list_for_each_entry(fcport, &vha->vp_fcports, list) {
 101                DEBUG15(printk("scsi(%ld): Marking port dead, "
 102                    "loop_id=0x%04x :%x\n",
 103                    vha->host_no, fcport->loop_id, fcport->vp_idx));
 104
 105                atomic_set(&fcport->state, FCS_DEVICE_DEAD);
 106                qla2x00_mark_device_lost(vha, fcport, 0, 0);
 107                atomic_set(&fcport->state, FCS_UNCONFIGURED);
 108        }
 109}
 110
 111int
 112qla24xx_disable_vp(scsi_qla_host_t *vha)
 113{
 114        int ret;
 115
 116        ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
 117        atomic_set(&vha->loop_state, LOOP_DOWN);
 118        atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 119
 120        qla2x00_mark_vp_devices_dead(vha);
 121        atomic_set(&vha->vp_state, VP_FAILED);
 122        vha->flags.management_server_logged_in = 0;
 123        if (ret == QLA_SUCCESS) {
 124                fc_vport_set_state(vha->fc_vport, FC_VPORT_DISABLED);
 125        } else {
 126                fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
 127                return -1;
 128        }
 129        return 0;
 130}
 131
 132int
 133qla24xx_enable_vp(scsi_qla_host_t *vha)
 134{
 135        int ret;
 136        struct qla_hw_data *ha = vha->hw;
 137        scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 138
 139        /* Check if physical ha port is Up */
 140        if (atomic_read(&base_vha->loop_state) == LOOP_DOWN  ||
 141                atomic_read(&base_vha->loop_state) == LOOP_DEAD) {
 142                vha->vp_err_state =  VP_ERR_PORTDWN;
 143                fc_vport_set_state(vha->fc_vport, FC_VPORT_LINKDOWN);
 144                goto enable_failed;
 145        }
 146
 147        /* Initialize the new vport unless it is a persistent port */
 148        mutex_lock(&ha->vport_lock);
 149        ret = qla24xx_modify_vp_config(vha);
 150        mutex_unlock(&ha->vport_lock);
 151
 152        if (ret != QLA_SUCCESS) {
 153                fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
 154                goto enable_failed;
 155        }
 156
 157        DEBUG15(qla_printk(KERN_INFO, ha,
 158            "Virtual port with id: %d - Enabled\n", vha->vp_idx));
 159        return 0;
 160
 161enable_failed:
 162        DEBUG15(qla_printk(KERN_INFO, ha,
 163            "Virtual port with id: %d - Disabled\n", vha->vp_idx));
 164        return 1;
 165}
 166
 167static void
 168qla24xx_configure_vp(scsi_qla_host_t *vha)
 169{
 170        struct fc_vport *fc_vport;
 171        int ret;
 172
 173        fc_vport = vha->fc_vport;
 174
 175        DEBUG15(printk("scsi(%ld): %s: change request #3 for this host.\n",
 176            vha->host_no, __func__));
 177        ret = qla2x00_send_change_request(vha, 0x3, vha->vp_idx);
 178        if (ret != QLA_SUCCESS) {
 179                DEBUG15(qla_printk(KERN_ERR, vha->hw, "Failed to enable "
 180                    "receiving of RSCN requests: 0x%x\n", ret));
 181                return;
 182        } else {
 183                /* Corresponds to SCR enabled */
 184                clear_bit(VP_SCR_NEEDED, &vha->vp_flags);
 185        }
 186
 187        vha->flags.online = 1;
 188        if (qla24xx_configure_vhba(vha))
 189                return;
 190
 191        atomic_set(&vha->vp_state, VP_ACTIVE);
 192        fc_vport_set_state(fc_vport, FC_VPORT_ACTIVE);
 193}
 194
 195void
 196qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
 197{
 198        scsi_qla_host_t *vha, *tvha;
 199        struct qla_hw_data *ha = rsp->hw;
 200        int i = 0;
 201
 202        list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
 203                if (vha->vp_idx) {
 204                        switch (mb[0]) {
 205                        case MBA_LIP_OCCURRED:
 206                        case MBA_LOOP_UP:
 207                        case MBA_LOOP_DOWN:
 208                        case MBA_LIP_RESET:
 209                        case MBA_POINT_TO_POINT:
 210                        case MBA_CHG_IN_CONNECTION:
 211                        case MBA_PORT_UPDATE:
 212                        case MBA_RSCN_UPDATE:
 213                                DEBUG15(printk("scsi(%ld)%s: Async_event for"
 214                                " VP[%d], mb = 0x%x, vha=%p\n",
 215                                vha->host_no, __func__, i, *mb, vha));
 216                                qla2x00_async_event(vha, rsp, mb);
 217                                break;
 218                        }
 219                }
 220                i++;
 221        }
 222}
 223
 224int
 225qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
 226{
 227        /*
 228         * Physical port will do most of the abort and recovery work. We can
 229         * just treat it as a loop down
 230         */
 231        if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
 232                atomic_set(&vha->loop_state, LOOP_DOWN);
 233                qla2x00_mark_all_devices_lost(vha, 0);
 234        } else {
 235                if (!atomic_read(&vha->loop_down_timer))
 236                        atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 237        }
 238
 239        /* To exclusively reset vport, we need to log it out first.*/
 240        if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
 241                qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
 242
 243        DEBUG15(printk("scsi(%ld): Scheduling enable of Vport %d...\n",
 244            vha->host_no, vha->vp_idx));
 245        return qla24xx_enable_vp(vha);
 246}
 247
 248static int
 249qla2x00_do_dpc_vp(scsi_qla_host_t *vha)
 250{
 251        struct qla_hw_data *ha = vha->hw;
 252        scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 253
 254        if (test_and_clear_bit(VP_IDX_ACQUIRED, &vha->vp_flags)) {
 255                /* VP acquired. complete port configuration */
 256                if (atomic_read(&base_vha->loop_state) == LOOP_READY) {
 257                        qla24xx_configure_vp(vha);
 258                } else {
 259                        set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
 260                        set_bit(VP_DPC_NEEDED, &base_vha->dpc_flags);
 261                }
 262
 263                return 0;
 264        }
 265
 266        if (test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) {
 267                qla2x00_update_fcports(vha);
 268                clear_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags);
 269        }
 270
 271        if ((test_and_clear_bit(RELOGIN_NEEDED, &vha->dpc_flags)) &&
 272                !test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags) &&
 273                atomic_read(&vha->loop_state) != LOOP_DOWN) {
 274
 275                DEBUG(printk("scsi(%ld): qla2x00_port_login()\n",
 276                                                vha->host_no));
 277                qla2x00_relogin(vha);
 278
 279                DEBUG(printk("scsi(%ld): qla2x00_port_login - end\n",
 280                                                        vha->host_no));
 281        }
 282
 283        if (test_and_clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags) &&
 284            (!(test_and_set_bit(RESET_ACTIVE, &vha->dpc_flags)))) {
 285                clear_bit(RESET_ACTIVE, &vha->dpc_flags);
 286        }
 287
 288        if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
 289                if (!(test_and_set_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags))) {
 290                        qla2x00_loop_resync(vha);
 291                        clear_bit(LOOP_RESYNC_ACTIVE, &vha->dpc_flags);
 292                }
 293        }
 294
 295        return 0;
 296}
 297
 298void
 299qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha)
 300{
 301        int ret;
 302        struct qla_hw_data *ha = vha->hw;
 303        scsi_qla_host_t *vp;
 304        struct scsi_qla_host *tvp;
 305
 306        if (vha->vp_idx)
 307                return;
 308        if (list_empty(&ha->vp_list))
 309                return;
 310
 311        clear_bit(VP_DPC_NEEDED, &vha->dpc_flags);
 312
 313        list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 314                if (vp->vp_idx)
 315                        ret = qla2x00_do_dpc_vp(vp);
 316        }
 317}
 318
 319int
 320qla24xx_vport_create_req_sanity_check(struct fc_vport *fc_vport)
 321{
 322        scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
 323        struct qla_hw_data *ha = base_vha->hw;
 324        scsi_qla_host_t *vha;
 325        uint8_t port_name[WWN_SIZE];
 326
 327        if (fc_vport->roles != FC_PORT_ROLE_FCP_INITIATOR)
 328                return VPCERR_UNSUPPORTED;
 329
 330        /* Check up the F/W and H/W support NPIV */
 331        if (!ha->flags.npiv_supported)
 332                return VPCERR_UNSUPPORTED;
 333
 334        /* Check up whether npiv supported switch presented */
 335        if (!(ha->switch_cap & FLOGI_MID_SUPPORT))
 336                return VPCERR_NO_FABRIC_SUPP;
 337
 338        /* Check up unique WWPN */
 339        u64_to_wwn(fc_vport->port_name, port_name);
 340        if (!memcmp(port_name, base_vha->port_name, WWN_SIZE))
 341                return VPCERR_BAD_WWN;
 342        vha = qla24xx_find_vhost_by_name(ha, port_name);
 343        if (vha)
 344                return VPCERR_BAD_WWN;
 345
 346        /* Check up max-npiv-supports */
 347        if (ha->num_vhosts > ha->max_npiv_vports) {
 348                DEBUG15(printk("scsi(%ld): num_vhosts %ud is bigger than "
 349                    "max_npv_vports %ud.\n", base_vha->host_no,
 350                    ha->num_vhosts, ha->max_npiv_vports));
 351                return VPCERR_UNSUPPORTED;
 352        }
 353        return 0;
 354}
 355
 356scsi_qla_host_t *
 357qla24xx_create_vhost(struct fc_vport *fc_vport)
 358{
 359        scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
 360        struct qla_hw_data *ha = base_vha->hw;
 361        scsi_qla_host_t *vha;
 362        struct scsi_host_template *sht = &qla2xxx_driver_template;
 363        struct Scsi_Host *host;
 364
 365        vha = qla2x00_create_host(sht, ha);
 366        if (!vha) {
 367                DEBUG(printk("qla2xxx: scsi_host_alloc() failed for vport\n"));
 368                return(NULL);
 369        }
 370
 371        host = vha->host;
 372        fc_vport->dd_data = vha;
 373        /* New host info */
 374        u64_to_wwn(fc_vport->node_name, vha->node_name);
 375        u64_to_wwn(fc_vport->port_name, vha->port_name);
 376
 377        vha->fc_vport = fc_vport;
 378        vha->device_flags = 0;
 379        vha->vp_idx = qla24xx_allocate_vp_id(vha);
 380        if (vha->vp_idx > ha->max_npiv_vports) {
 381                DEBUG15(printk("scsi(%ld): Couldn't allocate vp_id.\n",
 382                        vha->host_no));
 383                goto create_vhost_failed;
 384        }
 385        vha->mgmt_svr_loop_id = 10 + vha->vp_idx;
 386
 387        vha->dpc_flags = 0L;
 388        set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
 389        set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
 390
 391        /*
 392         * To fix the issue of processing a parent's RSCN for the vport before
 393         * its SCR is complete.
 394         */
 395        set_bit(VP_SCR_NEEDED, &vha->vp_flags);
 396        atomic_set(&vha->loop_state, LOOP_DOWN);
 397        atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 398
 399        qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
 400
 401        memset(vha->req_ques, 0, sizeof(vha->req_ques));
 402        vha->req_ques[0] = ha->req_q_map[0]->id;
 403        host->can_queue = ha->req_q_map[0]->length + 128;
 404        host->this_id = 255;
 405        host->cmd_per_lun = 3;
 406        host->max_cmd_len = MAX_CMDSZ;
 407        host->max_channel = MAX_BUSES - 1;
 408        host->max_lun = MAX_LUNS;
 409        host->unique_id = host->host_no;
 410        host->max_id = MAX_TARGETS_2200;
 411        host->transportt = qla2xxx_transport_vport_template;
 412
 413        DEBUG15(printk("DEBUG: detect vport hba %ld at address = %p\n",
 414            vha->host_no, vha));
 415
 416        vha->flags.init_done = 1;
 417
 418        return vha;
 419
 420create_vhost_failed:
 421        return NULL;
 422}
 423
 424static void
 425qla25xx_free_req_que(struct scsi_qla_host *vha, struct req_que *req)
 426{
 427        struct qla_hw_data *ha = vha->hw;
 428        uint16_t que_id = req->id;
 429
 430        dma_free_coherent(&ha->pdev->dev, (req->length + 1) *
 431                sizeof(request_t), req->ring, req->dma);
 432        req->ring = NULL;
 433        req->dma = 0;
 434        if (que_id) {
 435                ha->req_q_map[que_id] = NULL;
 436                mutex_lock(&ha->vport_lock);
 437                clear_bit(que_id, ha->req_qid_map);
 438                mutex_unlock(&ha->vport_lock);
 439        }
 440        kfree(req);
 441        req = NULL;
 442}
 443
 444static void
 445qla25xx_free_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 446{
 447        struct qla_hw_data *ha = vha->hw;
 448        uint16_t que_id = rsp->id;
 449
 450        if (rsp->msix && rsp->msix->have_irq) {
 451                free_irq(rsp->msix->vector, rsp);
 452                rsp->msix->have_irq = 0;
 453                rsp->msix->rsp = NULL;
 454        }
 455        dma_free_coherent(&ha->pdev->dev, (rsp->length + 1) *
 456                sizeof(response_t), rsp->ring, rsp->dma);
 457        rsp->ring = NULL;
 458        rsp->dma = 0;
 459        if (que_id) {
 460                ha->rsp_q_map[que_id] = NULL;
 461                mutex_lock(&ha->vport_lock);
 462                clear_bit(que_id, ha->rsp_qid_map);
 463                mutex_unlock(&ha->vport_lock);
 464        }
 465        kfree(rsp);
 466        rsp = NULL;
 467}
 468
 469int
 470qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
 471{
 472        int ret = -1;
 473
 474        if (req) {
 475                req->options |= BIT_0;
 476                ret = qla25xx_init_req_que(vha, req);
 477        }
 478        if (ret == QLA_SUCCESS)
 479                qla25xx_free_req_que(vha, req);
 480
 481        return ret;
 482}
 483
 484int
 485qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
 486{
 487        int ret = -1;
 488
 489        if (rsp) {
 490                rsp->options |= BIT_0;
 491                ret = qla25xx_init_rsp_que(vha, rsp);
 492        }
 493        if (ret == QLA_SUCCESS)
 494                qla25xx_free_rsp_que(vha, rsp);
 495
 496        return ret;
 497}
 498
 499int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos)
 500{
 501        int ret = 0;
 502        struct qla_hw_data *ha = vha->hw;
 503        struct req_que *req = ha->req_q_map[que];
 504
 505        req->options |= BIT_3;
 506        req->qos = qos;
 507        ret = qla25xx_init_req_que(vha, req);
 508        if (ret != QLA_SUCCESS)
 509                DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__));
 510        /* restore options bit */
 511        req->options &= ~BIT_3;
 512        return ret;
 513}
 514
 515
 516/* Delete all queues for a given vhost */
 517int
 518qla25xx_delete_queues(struct scsi_qla_host *vha, uint8_t que_no)
 519{
 520        int cnt, ret = 0;
 521        struct req_que *req = NULL;
 522        struct rsp_que *rsp = NULL;
 523        struct qla_hw_data *ha = vha->hw;
 524
 525        if (que_no) {
 526        /* Delete request queue */
 527                req = ha->req_q_map[que_no];
 528                if (req) {
 529                        rsp = req->rsp;
 530                        ret = qla25xx_delete_req_que(vha, req);
 531                        if (ret != QLA_SUCCESS) {
 532                                qla_printk(KERN_WARNING, ha,
 533                                "Couldn't delete req que %d\n", req->id);
 534                                return ret;
 535                        }
 536                        /* Delete associated response queue */
 537                        if (rsp) {
 538                                ret = qla25xx_delete_rsp_que(vha, rsp);
 539                                if (ret != QLA_SUCCESS) {
 540                                        qla_printk(KERN_WARNING, ha,
 541                                                "Couldn't delete rsp que %d\n",
 542                                                rsp->id);
 543                                        return ret;
 544                                }
 545                        }
 546                }
 547        } else {  /* delete all queues of this host */
 548                for (cnt = 0; cnt < QLA_MAX_HOST_QUES; cnt++) {
 549                        /* Delete request queues */
 550                        req = ha->req_q_map[vha->req_ques[cnt]];
 551                        if (req && req->id) {
 552                                rsp = req->rsp;
 553                                ret = qla25xx_delete_req_que(vha, req);
 554                                if (ret != QLA_SUCCESS) {
 555                                        qla_printk(KERN_WARNING, ha,
 556                                                "Couldn't delete req que %d\n",
 557                                                vha->req_ques[cnt]);
 558                                        return ret;
 559                                }
 560                                vha->req_ques[cnt] = ha->req_q_map[0]->id;
 561                        /* Delete associated response queue */
 562                                if (rsp && rsp->id) {
 563                                        ret = qla25xx_delete_rsp_que(vha, rsp);
 564                                        if (ret != QLA_SUCCESS) {
 565                                                qla_printk(KERN_WARNING, ha,
 566                                                "Couldn't delete rsp que %d\n",
 567                                                rsp->id);
 568                                                return ret;
 569                                        }
 570                                }
 571                        }
 572                }
 573        }
 574        qla_printk(KERN_INFO, ha, "Queues deleted for vport:%d\n",
 575                vha->vp_idx);
 576        return ret;
 577}
 578
 579int
 580qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
 581        uint8_t vp_idx, uint16_t rid, uint8_t rsp_que, uint8_t qos)
 582{
 583        int ret = 0;
 584        struct req_que *req = NULL;
 585        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 586        uint16_t que_id = 0;
 587        device_reg_t __iomem *reg;
 588
 589        req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
 590        if (req == NULL) {
 591                qla_printk(KERN_WARNING, ha, "could not allocate memory"
 592                        "for request que\n");
 593                goto que_failed;
 594        }
 595
 596        req->length = REQUEST_ENTRY_CNT_24XX;
 597        req->ring = dma_alloc_coherent(&ha->pdev->dev,
 598                        (req->length + 1) * sizeof(request_t),
 599                        &req->dma, GFP_KERNEL);
 600        if (req->ring == NULL) {
 601                qla_printk(KERN_WARNING, ha,
 602                "Memory Allocation failed - request_ring\n");
 603                goto que_failed;
 604        }
 605
 606        mutex_lock(&ha->vport_lock);
 607        que_id = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
 608        if (que_id >= ha->max_queues) {
 609                mutex_unlock(&ha->vport_lock);
 610                qla_printk(KERN_INFO, ha, "No resources to create "
 611                         "additional request queue\n");
 612                goto que_failed;
 613        }
 614        set_bit(que_id, ha->req_qid_map);
 615        ha->req_q_map[que_id] = req;
 616        req->rid = rid;
 617        req->vp_idx = vp_idx;
 618        req->qos = qos;
 619
 620        if (ha->rsp_q_map[rsp_que]) {
 621                req->rsp = ha->rsp_q_map[rsp_que];
 622                req->rsp->req = req;
 623        }
 624        /* Use alternate PCI bus number */
 625        if (MSB(req->rid))
 626                options |= BIT_4;
 627        /* Use alternate PCI devfn */
 628        if (LSB(req->rid))
 629                options |= BIT_5;
 630        req->options = options;
 631        req->ring_ptr = req->ring;
 632        req->ring_index = 0;
 633        req->cnt = req->length;
 634        req->id = que_id;
 635        reg = ISP_QUE_REG(ha, que_id);
 636        req->req_q_in = &reg->isp25mq.req_q_in;
 637        req->req_q_out = &reg->isp25mq.req_q_out;
 638        req->max_q_depth = ha->req_q_map[0]->max_q_depth;
 639        mutex_unlock(&ha->vport_lock);
 640
 641        ret = qla25xx_init_req_que(base_vha, req);
 642        if (ret != QLA_SUCCESS) {
 643                qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
 644                mutex_lock(&ha->vport_lock);
 645                clear_bit(que_id, ha->req_qid_map);
 646                mutex_unlock(&ha->vport_lock);
 647                goto que_failed;
 648        }
 649
 650        return req->id;
 651
 652que_failed:
 653        qla25xx_free_req_que(base_vha, req);
 654        return 0;
 655}
 656
 657/* create response queue */
 658int
 659qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 660        uint8_t vp_idx, uint16_t rid)
 661{
 662        int ret = 0;
 663        struct rsp_que *rsp = NULL;
 664        struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
 665        uint16_t que_id = 0;
 666        device_reg_t __iomem *reg;
 667
 668        rsp = kzalloc(sizeof(struct rsp_que), GFP_KERNEL);
 669        if (rsp == NULL) {
 670                qla_printk(KERN_WARNING, ha, "could not allocate memory for"
 671                                " response que\n");
 672                goto que_failed;
 673        }
 674
 675        rsp->length = RESPONSE_ENTRY_CNT_2300;
 676        rsp->ring = dma_alloc_coherent(&ha->pdev->dev,
 677                        (rsp->length + 1) * sizeof(response_t),
 678                        &rsp->dma, GFP_KERNEL);
 679        if (rsp->ring == NULL) {
 680                qla_printk(KERN_WARNING, ha,
 681                "Memory Allocation failed - response_ring\n");
 682                goto que_failed;
 683        }
 684
 685        mutex_lock(&ha->vport_lock);
 686        que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
 687        if (que_id >= ha->max_queues) {
 688                mutex_unlock(&ha->vport_lock);
 689                qla_printk(KERN_INFO, ha, "No resources to create "
 690                         "additional response queue\n");
 691                goto que_failed;
 692        }
 693        set_bit(que_id, ha->rsp_qid_map);
 694
 695        if (ha->flags.msix_enabled)
 696                rsp->msix = &ha->msix_entries[que_id + 1];
 697        else
 698                qla_printk(KERN_WARNING, ha, "msix not enabled\n");
 699
 700        ha->rsp_q_map[que_id] = rsp;
 701        rsp->rid = rid;
 702        rsp->vp_idx = vp_idx;
 703        rsp->hw = ha;
 704        /* Use alternate PCI bus number */
 705        if (MSB(rsp->rid))
 706                options |= BIT_4;
 707        /* Use alternate PCI devfn */
 708        if (LSB(rsp->rid))
 709                options |= BIT_5;
 710        rsp->options = options;
 711        rsp->ring_ptr = rsp->ring;
 712        rsp->ring_index = 0;
 713        rsp->id = que_id;
 714        reg = ISP_QUE_REG(ha, que_id);
 715        rsp->rsp_q_in = &reg->isp25mq.rsp_q_in;
 716        rsp->rsp_q_out = &reg->isp25mq.rsp_q_out;
 717        mutex_unlock(&ha->vport_lock);
 718
 719        ret = qla25xx_request_irq(rsp);
 720        if (ret)
 721                goto que_failed;
 722
 723        ret = qla25xx_init_rsp_que(base_vha, rsp);
 724        if (ret != QLA_SUCCESS) {
 725                qla_printk(KERN_WARNING, ha, "%s failed\n", __func__);
 726                mutex_lock(&ha->vport_lock);
 727                clear_bit(que_id, ha->rsp_qid_map);
 728                mutex_unlock(&ha->vport_lock);
 729                goto que_failed;
 730        }
 731
 732        qla2x00_init_response_q_entries(rsp);
 733
 734        return rsp->id;
 735
 736que_failed:
 737        qla25xx_free_rsp_que(base_vha, rsp);
 738        return 0;
 739}
 740
 741int
 742qla25xx_create_queues(struct scsi_qla_host *vha, uint8_t qos)
 743{
 744        uint16_t options = 0;
 745        uint8_t ret = 0;
 746        struct qla_hw_data *ha = vha->hw;
 747
 748        options |= BIT_1;
 749        ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0);
 750        if (!ret) {
 751                qla_printk(KERN_WARNING, ha, "Response Que create failed\n");
 752                return ret;
 753        } else
 754                qla_printk(KERN_INFO, ha, "Response Que:%d created.\n", ret);
 755
 756        options = 0;
 757        if (qos & BIT_7)
 758                options |= BIT_8;
 759        ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, ret,
 760                                        qos & ~BIT_7);
 761        if (ret) {
 762                vha->req_ques[0] = ret;
 763                qla_printk(KERN_INFO, ha, "Request Que:%d created.\n", ret);
 764        } else
 765                qla_printk(KERN_WARNING, ha, "Request Que create failed\n");
 766
 767        return ret;
 768}
 769
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.