/*
 * QLogic Fibre Channel HBA Driver
 * Copyright (c)  2003-2008 QLogic Corporation
 *
 * See LICENSE.qla2xxx for copyright and licensing details.
 */
#ifndef __QLA_DEF_H
#define __QLA_DEF_H

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/dmapool.h>
#include <linux/mempool.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/firmware.h>
#include <linux/aer.h>
#include <linux/mutex.h>

#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_transport_fc.h>

#define QLA2XXX_DRIVER_NAME  "qla2xxx"

/*
 * We have MAILBOX_REGISTER_COUNT sized arrays in a few places,
 * but that's fine as we don't look at the last 24 ones for
 * ISP2100 HBAs.
 */
#define MAILBOX_REGISTER_COUNT_2100     8
#define MAILBOX_REGISTER_COUNT          32

#define QLA2200A_RISC_ROM_VER   4
#define FPM_2300                6
#define FPM_2310                7

#include "qla_settings.h"

/*
 * Data bit definitions
 */
#define BIT_0   0x1
#define BIT_1   0x2
#define BIT_2   0x4
#define BIT_3   0x8
#define BIT_4   0x10
#define BIT_5   0x20
#define BIT_6   0x40
#define BIT_7   0x80
#define BIT_8   0x100
#define BIT_9   0x200
#define BIT_10  0x400
#define BIT_11  0x800
#define BIT_12  0x1000
#define BIT_13  0x2000
#define BIT_14  0x4000
#define BIT_15  0x8000
#define BIT_16  0x10000
#define BIT_17  0x20000
#define BIT_18  0x40000
#define BIT_19  0x80000
#define BIT_20  0x100000
#define BIT_21  0x200000
#define BIT_22  0x400000
#define BIT_23  0x800000
#define BIT_24  0x1000000
#define BIT_25  0x2000000
#define BIT_26  0x4000000
#define BIT_27  0x8000000
#define BIT_28  0x10000000
#define BIT_29  0x20000000
#define BIT_30  0x40000000
#define BIT_31  0x80000000

#define LSB(x)  ((uint8_t)(x))
#define MSB(x)  ((uint8_t)((uint16_t)(x) >> 8))

#define LSW(x)  ((uint16_t)(x))
#define MSW(x)  ((uint16_t)((uint32_t)(x) >> 16))

#define LSD(x)  ((uint32_t)((uint64_t)(x)))
#define MSD(x)  ((uint32_t)((((uint64_t)(x)) >> 16) >> 16))


/*
 * I/O register
*/

#define RD_REG_BYTE(addr)               readb(addr)
#define RD_REG_WORD(addr)               readw(addr)
#define RD_REG_DWORD(addr)              readl(addr)
#define RD_REG_BYTE_RELAXED(addr)       readb_relaxed(addr)
#define RD_REG_WORD_RELAXED(addr)       readw_relaxed(addr)
#define RD_REG_DWORD_RELAXED(addr)      readl_relaxed(addr)
#define WRT_REG_BYTE(addr, data)        writeb(data,addr)
#define WRT_REG_WORD(addr, data)        writew(data,addr)
#define WRT_REG_DWORD(addr, data)       writel(data,addr)

/*
 * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
 * 133Mhz slot.
 */
#define RD_REG_WORD_PIO(addr)           (inw((unsigned long)addr))
#define WRT_REG_WORD_PIO(addr, data)    (outw(data,(unsigned long)addr))

/*
 * Fibre Channel device definitions.
 */
#define WWN_SIZE                8       /* Size of WWPN, WWN & WWNN */
#define MAX_FIBRE_DEVICES       512
#define MAX_FIBRE_LUNS          0xFFFF
#define MAX_RSCN_COUNT          32
#define MAX_HOST_COUNT          16

/*
 * Host adapter default definitions.
 */
#define MAX_BUSES               1  /* We only have one bus today */
#define MAX_TARGETS_2100        MAX_FIBRE_DEVICES
#define MAX_TARGETS_2200        MAX_FIBRE_DEVICES
#define MIN_LUNS                8
#define MAX_LUNS                MAX_FIBRE_LUNS
#define MAX_CMDS_PER_LUN        255

/*
 * Fibre Channel device definitions.
 */
#define SNS_LAST_LOOP_ID_2100   0xfe
#define SNS_LAST_LOOP_ID_2300   0x7ff

#define LAST_LOCAL_LOOP_ID      0x7d
#define SNS_FL_PORT             0x7e
#define FABRIC_CONTROLLER       0x7f
#define SIMPLE_NAME_SERVER      0x80
#define SNS_FIRST_LOOP_ID       0x81
#define MANAGEMENT_SERVER       0xfe
#define BROADCAST               0xff

/*
 * There is no correspondence between an N-PORT id and an AL_PA.  Therefore the
 * valid range of an N-PORT id is 0 through 0x7ef.
 */
#define NPH_LAST_HANDLE         0x7ef
#define NPH_MGMT_SERVER         0x7fa           /*  FFFFFA */
#define NPH_SNS                 0x7fc           /*  FFFFFC */
#define NPH_FABRIC_CONTROLLER   0x7fd           /*  FFFFFD */
#define NPH_F_PORT              0x7fe           /*  FFFFFE */
#define NPH_IP_BROADCAST        0x7ff           /*  FFFFFF */

#define MAX_CMDSZ       16              /* SCSI maximum CDB size. */
#include "qla_fw.h"

/*
 * Timeout timer counts in seconds
 */
#define PORT_RETRY_TIME                 1
#define LOOP_DOWN_TIMEOUT               60
#define LOOP_DOWN_TIME                  255     /* 240 */
#define LOOP_DOWN_RESET                 (LOOP_DOWN_TIME - 30)

/* Maximum outstanding commands in ISP queues (1-65535) */
#define MAX_OUTSTANDING_COMMANDS        1024

/* ISP request and response entry counts (37-65535) */
#define REQUEST_ENTRY_CNT_2100          128     /* Number of request entries. */
#define REQUEST_ENTRY_CNT_2200          2048    /* Number of request entries. */
#define REQUEST_ENTRY_CNT_24XX          2048    /* Number of request entries. */
#define RESPONSE_ENTRY_CNT_2100         64      /* Number of response entries.*/
#define RESPONSE_ENTRY_CNT_2300         512     /* Number of response entries.*/

struct req_que;

/*
 * SCSI Request Block
 */
typedef struct srb {
        struct req_que *que;
        struct fc_port *fcport;

        struct scsi_cmnd *cmd;          /* Linux SCSI command pkt */

        uint16_t flags;

        uint32_t request_sense_length;
        uint8_t *request_sense_ptr;
} srb_t;

/*
 * SRB flag definitions
 */
#define SRB_DMA_VALID           BIT_0   /* Command sent to ISP */

/*
 * ISP I/O Register Set structure definitions.
 */
struct device_reg_2xxx {
        uint16_t flash_address;         /* Flash BIOS address */
        uint16_t flash_data;            /* Flash BIOS data */
        uint16_t unused_1[1];           /* Gap */
        uint16_t ctrl_status;           /* Control/Status */
#define CSR_FLASH_64K_BANK      BIT_3   /* Flash upper 64K bank select */
#define CSR_FLASH_ENABLE        BIT_1   /* Flash BIOS Read/Write enable */
#define CSR_ISP_SOFT_RESET      BIT_0   /* ISP soft reset */

        uint16_t ictrl;                 /* Interrupt control */
#define ICR_EN_INT              BIT_15  /* ISP enable interrupts. */
#define ICR_EN_RISC             BIT_3   /* ISP enable RISC interrupts. */

        uint16_t istatus;               /* Interrupt status */
#define ISR_RISC_INT            BIT_3   /* RISC interrupt */

        uint16_t semaphore;             /* Semaphore */
        uint16_t nvram;                 /* NVRAM register. */
#define NVR_DESELECT            0
#define NVR_BUSY                BIT_15
#define NVR_WRT_ENABLE          BIT_14  /* Write enable */
#define NVR_PR_ENABLE           BIT_13  /* Protection register enable */
#define NVR_DATA_IN             BIT_3
#define NVR_DATA_OUT            BIT_2
#define NVR_SELECT              BIT_1
#define NVR_CLOCK               BIT_0

#define NVR_WAIT_CNT            20000

        union {
                struct {
                        uint16_t mailbox0;
                        uint16_t mailbox1;
                        uint16_t mailbox2;
                        uint16_t mailbox3;
                        uint16_t mailbox4;
                        uint16_t mailbox5;
                        uint16_t mailbox6;
                        uint16_t mailbox7;
                        uint16_t unused_2[59];  /* Gap */
                } __attribute__((packed)) isp2100;
                struct {
                                                /* Request Queue */
                        uint16_t req_q_in;      /*  In-Pointer */
                        uint16_t req_q_out;     /*  Out-Pointer */
                                                /* Response Queue */
                        uint16_t rsp_q_in;      /*  In-Pointer */
                        uint16_t rsp_q_out;     /*  Out-Pointer */

                                                /* RISC to Host Status */
                        uint32_t host_status;
#define HSR_RISC_INT            BIT_15  /* RISC interrupt */
#define HSR_RISC_PAUSED         BIT_8   /* RISC Paused */

                                        /* Host to Host Semaphore */
                        uint16_t host_semaphore;
                        uint16_t unused_3[17];  /* Gap */
                        uint16_t mailbox0;
                        uint16_t mailbox1;
                        uint16_t mailbox2;
                        uint16_t mailbox3;
                        uint16_t mailbox4;
                        uint16_t mailbox5;
                        uint16_t mailbox6;
                        uint16_t mailbox7;
                        uint16_t mailbox8;
                        uint16_t mailbox9;
                        uint16_t mailbox10;
                        uint16_t mailbox11;
                        uint16_t mailbox12;
                        uint16_t mailbox13;
                        uint16_t mailbox14;
                        uint16_t mailbox15;
                        uint16_t mailbox16;
                        uint16_t mailbox17;
                        uint16_t mailbox18;
                        uint16_t mailbox19;
                        uint16_t mailbox20;
                        uint16_t mailbox21;
                        uint16_t mailbox22;
                        uint16_t mailbox23;
                        uint16_t mailbox24;
                        uint16_t mailbox25;
                        uint16_t mailbox26;
                        uint16_t mailbox27;
                        uint16_t mailbox28;
                        uint16_t mailbox29;
                        uint16_t mailbox30;
                        uint16_t mailbox31;
                        uint16_t fb_cmd;
                        uint16_t unused_4[10];  /* Gap */
                } __attribute__((packed)) isp2300;
        } u;

        uint16_t fpm_diag_config;
        uint16_t unused_5[0x4];         /* Gap */
        uint16_t risc_hw;
        uint16_t unused_5_1;            /* Gap */
        uint16_t pcr;                   /* Processor Control Register. */
        uint16_t unused_6[0x5];         /* Gap */
        uint16_t mctr;                  /* Memory Configuration and Timing. */
        uint16_t unused_7[0x3];         /* Gap */
        uint16_t fb_cmd_2100;           /* Unused on 23XX */
        uint16_t unused_8[0x3];         /* Gap */
        uint16_t hccr;                  /* Host command & control register. */
#define HCCR_HOST_INT           BIT_7   /* Host interrupt bit */
#define HCCR_RISC_PAUSE         BIT_5   /* Pause mode bit */
                                        /* HCCR commands */
#define HCCR_RESET_RISC         0x1000  /* Reset RISC */
#define HCCR_PAUSE_RISC         0x2000  /* Pause RISC */
#define HCCR_RELEASE_RISC       0x3000  /* Release RISC from reset. */
#define HCCR_SET_HOST_INT       0x5000  /* Set host interrupt */
#define HCCR_CLR_HOST_INT       0x6000  /* Clear HOST interrupt */
#define HCCR_CLR_RISC_INT       0x7000  /* Clear RISC interrupt */
#define HCCR_DISABLE_PARITY_PAUSE 0x4001 /* Disable parity error RISC pause. */
#define HCCR_ENABLE_PARITY      0xA000  /* Enable PARITY interrupt */

        uint16_t unused_9[5];           /* Gap */
        uint16_t gpiod;                 /* GPIO Data register. */
        uint16_t gpioe;                 /* GPIO Enable register. */
#define GPIO_LED_MASK                   0x00C0
#define GPIO_LED_GREEN_OFF_AMBER_OFF    0x0000
#define GPIO_LED_GREEN_ON_AMBER_OFF     0x0040
#define GPIO_LED_GREEN_OFF_AMBER_ON     0x0080
#define GPIO_LED_GREEN_ON_AMBER_ON      0x00C0
#define GPIO_LED_ALL_OFF                0x0000
#define GPIO_LED_RED_ON_OTHER_OFF       0x0001  /* isp2322 */
#define GPIO_LED_RGA_ON                 0x00C1  /* isp2322: red green amber */

        union {
                struct {
                        uint16_t unused_10[8];  /* Gap */
                        uint16_t mailbox8;
                        uint16_t mailbox9;
                        uint16_t mailbox10;
                        uint16_t mailbox11;
                        uint16_t mailbox12;
                        uint16_t mailbox13;
                        uint16_t mailbox14;
                        uint16_t mailbox15;
                        uint16_t mailbox16;
                        uint16_t mailbox17;
                        uint16_t mailbox18;
                        uint16_t mailbox19;
                        uint16_t mailbox20;
                        uint16_t mailbox21;
                        uint16_t mailbox22;
                        uint16_t mailbox23;     /* Also probe reg. */
                } __attribute__((packed)) isp2200;
        } u_end;
};

struct device_reg_25xxmq {
        uint32_t req_q_in;
        uint32_t req_q_out;
        uint32_t rsp_q_in;
        uint32_t rsp_q_out;
};

typedef union {
                struct device_reg_2xxx isp;
                struct device_reg_24xx isp24;
                struct device_reg_25xxmq isp25mq;
} device_reg_t;

#define ISP_REQ_Q_IN(ha, reg) \
        (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
         &(reg)->u.isp2100.mailbox4 : \
         &(reg)->u.isp2300.req_q_in)
#define ISP_REQ_Q_OUT(ha, reg) \
        (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
         &(reg)->u.isp2100.mailbox4 : \
         &(reg)->u.isp2300.req_q_out)
#define ISP_RSP_Q_IN(ha, reg) \
        (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
         &(reg)->u.isp2100.mailbox5 : \
         &(reg)->u.isp2300.rsp_q_in)
#define ISP_RSP_Q_OUT(ha, reg) \
        (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
         &(reg)->u.isp2100.mailbox5 : \
         &(reg)->u.isp2300.rsp_q_out)

#define MAILBOX_REG(ha, reg, num) \
        (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
         (num < 8 ? \
          &(reg)->u.isp2100.mailbox0 + (num) : \
          &(reg)->u_end.isp2200.mailbox8 + (num) - 8) : \
         &(reg)->u.isp2300.mailbox0 + (num))
#define RD_MAILBOX_REG(ha, reg, num) \
        RD_REG_WORD(MAILBOX_REG(ha, reg, num))
#define WRT_MAILBOX_REG(ha, reg, num, data) \
        WRT_REG_WORD(MAILBOX_REG(ha, reg, num), data)

#define FB_CMD_REG(ha, reg) \
        (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
         &(reg)->fb_cmd_2100 : \
         &(reg)->u.isp2300.fb_cmd)
#define RD_FB_CMD_REG(ha, reg) \
        RD_REG_WORD(FB_CMD_REG(ha, reg))
#define WRT_FB_CMD_REG(ha, reg, data) \
        WRT_REG_WORD(FB_CMD_REG(ha, reg), data)

typedef struct {
        uint32_t        out_mb;         /* outbound from driver */
        uint32_t        in_mb;                  /* Incoming from RISC */
        uint16_t        mb[MAILBOX_REGISTER_COUNT];
        long            buf_size;
        void            *bufp;
        uint32_t        tov;
        uint8_t         flags;
#define MBX_DMA_IN      BIT_0
#define MBX_DMA_OUT     BIT_1
#define IOCTL_CMD       BIT_2
} mbx_cmd_t;

#define MBX_TOV_SECONDS 30

/*
 *  ISP product identification definitions in mailboxes after reset.
 */
#define PROD_ID_1               0x4953
#define PROD_ID_2               0x0000
#define PROD_ID_2a              0x5020
#define PROD_ID_3               0x2020

/*
 * ISP mailbox Self-Test status codes
 */
#define MBS_FRM_ALIVE           0       /* Firmware Alive. */
#define MBS_CHKSUM_ERR          1       /* Checksum Error. */
#define MBS_BUSY                4       /* Busy. */

/*
 * ISP mailbox command complete status codes
 */
#define MBS_COMMAND_COMPLETE            0x4000
#define MBS_INVALID_COMMAND             0x4001
#define MBS_HOST_INTERFACE_ERROR        0x4002
#define MBS_TEST_FAILED                 0x4003
#define MBS_COMMAND_ERROR               0x4005
#define MBS_COMMAND_PARAMETER_ERROR     0x4006
#define MBS_PORT_ID_USED                0x4007
#define MBS_LOOP_ID_USED                0x4008
#define MBS_ALL_IDS_IN_USE              0x4009
#define MBS_NOT_LOGGED_IN               0x400A
#define MBS_LINK_DOWN_ERROR             0x400B
#define MBS_DIAG_ECHO_TEST_ERROR        0x400C

/*
 * ISP mailbox asynchronous event status codes
 */
#define MBA_ASYNC_EVENT         0x8000  /* Asynchronous event. */
#define MBA_RESET               0x8001  /* Reset Detected. */
#define MBA_SYSTEM_ERR          0x8002  /* System Error. */
#define MBA_REQ_TRANSFER_ERR    0x8003  /* Request Transfer Error. */
#define MBA_RSP_TRANSFER_ERR    0x8004  /* Response Transfer Error. */
#define MBA_WAKEUP_THRES        0x8005  /* Request Queue Wake-up. */
#define MBA_LIP_OCCURRED        0x8010  /* Loop Initialization Procedure */
                                        /* occurred. */
#define MBA_LOOP_UP             0x8011  /* FC Loop UP. */
#define MBA_LOOP_DOWN           0x8012  /* FC Loop Down. */
#define MBA_LIP_RESET           0x8013  /* LIP reset occurred. */
#define MBA_PORT_UPDATE         0x8014  /* Port Database update. */
#define MBA_RSCN_UPDATE         0x8015  /* Register State Chg Notification. */
#define MBA_LIP_F8              0x8016  /* Received a LIP F8. */
#define MBA_LOOP_INIT_ERR       0x8017  /* Loop Initialization Error. */
#define MBA_FABRIC_AUTH_REQ     0x801b  /* Fabric Authentication Required. */
#define MBA_SCSI_COMPLETION     0x8020  /* SCSI Command Complete. */
#define MBA_CTIO_COMPLETION     0x8021  /* CTIO Complete. */
#define MBA_IP_COMPLETION       0x8022  /* IP Transmit Command Complete. */
#define MBA_IP_RECEIVE          0x8023  /* IP Received. */
#define MBA_IP_BROADCAST        0x8024  /* IP Broadcast Received. */
#define MBA_IP_LOW_WATER_MARK   0x8025  /* IP Low Water Mark reached. */
#define MBA_IP_RCV_BUFFER_EMPTY 0x8026  /* IP receive buffer queue empty. */
#define MBA_IP_HDR_DATA_SPLIT   0x8027  /* IP header/data splitting feature */
                                        /* used. */
#define MBA_TRACE_NOTIFICATION  0x8028  /* Trace/Diagnostic notification. */
#define MBA_POINT_TO_POINT      0x8030  /* Point to point mode. */
#define MBA_CMPLT_1_16BIT       0x8031  /* Completion 1 16bit IOSB. */
#define MBA_CMPLT_2_16BIT       0x8032  /* Completion 2 16bit IOSB. */
#define MBA_CMPLT_3_16BIT       0x8033  /* Completion 3 16bit IOSB. */
#define MBA_CMPLT_4_16BIT       0x8034  /* Completion 4 16bit IOSB. */
#define MBA_CMPLT_5_16BIT       0x8035  /* Completion 5 16bit IOSB. */
#define MBA_CHG_IN_CONNECTION   0x8036  /* Change in connection mode. */
#define MBA_RIO_RESPONSE        0x8040  /* RIO response queue update. */
#define MBA_ZIO_RESPONSE        0x8040  /* ZIO response queue update. */
#define MBA_CMPLT_2_32BIT       0x8042  /* Completion 2 32bit IOSB. */
#define MBA_BYPASS_NOTIFICATION 0x8043  /* Auto bypass notification. */
#define MBA_DISCARD_RND_FRAME   0x8048  /* discard RND frame due to error. */
#define MBA_REJECTED_FCP_CMD    0x8049  /* rejected FCP_CMD. */

/*
 * Firmware options 1, 2, 3.
 */
#define FO1_AE_ON_LIPF8                 BIT_0
#define FO1_AE_ALL_LIP_RESET            BIT_1
#define FO1_CTIO_RETRY                  BIT_3
#define FO1_DISABLE_LIP_F7_SW           BIT_4
#define FO1_DISABLE_100MS_LOS_WAIT      BIT_5
#define FO1_DISABLE_GPIO6_7             BIT_6   /* LED bits */
#define FO1_AE_ON_LOOP_INIT_ERR         BIT_7
#define FO1_SET_EMPHASIS_SWING          BIT_8
#define FO1_AE_AUTO_BYPASS              BIT_9
#define FO1_ENABLE_PURE_IOCB            BIT_10
#define FO1_AE_PLOGI_RJT                BIT_11
#define FO1_ENABLE_ABORT_SEQUENCE       BIT_12
#define FO1_AE_QUEUE_FULL               BIT_13

#define FO2_ENABLE_ATIO_TYPE_3          BIT_0
#define FO2_REV_LOOPBACK                BIT_1

#define FO3_ENABLE_EMERG_IOCB           BIT_0
#define FO3_AE_RND_ERROR                BIT_1

/* 24XX additional firmware options */
#define ADD_FO_COUNT                    3
#define ADD_FO1_DISABLE_GPIO_LED_CTRL   BIT_6   /* LED bits */
#define ADD_FO1_ENABLE_PUREX_IOCB       BIT_10

#define ADD_FO2_ENABLE_SEL_CLS2         BIT_5

#define ADD_FO3_NO_ABT_ON_LINK_DOWN     BIT_14

/*
 * ISP mailbox commands
 */
#define MBC_LOAD_RAM                    1       /* Load RAM. */
#define MBC_EXECUTE_FIRMWARE            2       /* Execute firmware. */
#define MBC_WRITE_RAM_WORD              4       /* Write RAM word. */
#define MBC_READ_RAM_WORD               5       /* Read RAM word. */
#define MBC_MAILBOX_REGISTER_TEST       6       /* Wrap incoming mailboxes */
#define MBC_VERIFY_CHECKSUM             7       /* Verify checksum. */
#define MBC_GET_FIRMWARE_VERSION        8       /* Get firmware revision. */
#define MBC_LOAD_RISC_RAM               9       /* Load RAM command. */
#define MBC_DUMP_RISC_RAM               0xa     /* Dump RAM command. */
#define MBC_LOAD_RISC_RAM_EXTENDED      0xb     /* Load RAM extended. */
#define MBC_DUMP_RISC_RAM_EXTENDED      0xc     /* Dump RAM extended. */
#define MBC_WRITE_RAM_WORD_EXTENDED     0xd     /* Write RAM word extended */
#define MBC_READ_RAM_EXTENDED           0xf     /* Read RAM extended. */
#define MBC_IOCB_COMMAND                0x12    /* Execute IOCB command. */
#define MBC_STOP_FIRMWARE               0x14    /* Stop firmware. */
#define MBC_ABORT_COMMAND               0x15    /* Abort IOCB command. */
#define MBC_ABORT_DEVICE                0x16    /* Abort device (ID/LUN). */
#define MBC_ABORT_TARGET                0x17    /* Abort target (ID). */
#define MBC_RESET                       0x18    /* Reset. */
#define MBC_GET_ADAPTER_LOOP_ID         0x20    /* Get loop id of ISP2200. */
#define MBC_GET_RETRY_COUNT             0x22    /* Get f/w retry cnt/delay. */
#define MBC_DISABLE_VI                  0x24    /* Disable VI operation. */
#define MBC_ENABLE_VI                   0x25    /* Enable VI operation. */
#define MBC_GET_FIRMWARE_OPTION         0x28    /* Get Firmware Options. */
#define MBC_SET_FIRMWARE_OPTION         0x38    /* Set Firmware Options. */
#define MBC_LOOP_PORT_BYPASS            0x40    /* Loop Port Bypass. */
#define MBC_LOOP_PORT_ENABLE            0x41    /* Loop Port Enable. */
#define MBC_GET_RESOURCE_COUNTS         0x42    /* Get Resource Counts. */
#define MBC_NON_PARTICIPATE             0x43    /* Non-Participating Mode. */
#define MBC_DIAGNOSTIC_ECHO             0x44    /* Diagnostic echo. */
#define MBC_DIAGNOSTIC_LOOP_BACK        0x45    /* Diagnostic loop back. */
#define MBC_ONLINE_SELF_TEST            0x46    /* Online self-test. */
#define MBC_ENHANCED_GET_PORT_DATABASE  0x47    /* Get port database + login */
#define MBC_RESET_LINK_STATUS           0x52    /* Reset Link Error Status */
#define MBC_IOCB_COMMAND_A64            0x54    /* Execute IOCB command (64) */
#define MBC_SEND_RNID_ELS               0x57    /* Send RNID ELS request */
#define MBC_SET_RNID_PARAMS             0x59    /* Set RNID parameters */
#define MBC_GET_RNID_PARAMS             0x5a    /* Data Rate */
#define MBC_DATA_RATE                   0x5d    /* Get RNID parameters */
#define MBC_INITIALIZE_FIRMWARE         0x60    /* Initialize firmware */
#define MBC_INITIATE_LIP                0x62    /* Initiate Loop */
                                                /* Initialization Procedure */
#define MBC_GET_FC_AL_POSITION_MAP      0x63    /* Get FC_AL Position Map. */
#define MBC_GET_PORT_DATABASE           0x64    /* Get Port Database. */
#define MBC_CLEAR_ACA                   0x65    /* Clear ACA. */
#define MBC_TARGET_RESET                0x66    /* Target Reset. */
#define MBC_CLEAR_TASK_SET              0x67    /* Clear Task Set. */
#define MBC_ABORT_TASK_SET              0x68    /* Abort Task Set. */
#define MBC_GET_FIRMWARE_STATE          0x69    /* Get firmware state. */
#define MBC_GET_PORT_NAME               0x6a    /* Get port name. */
#define MBC_GET_LINK_STATUS             0x6b    /* Get port link status. */
#define MBC_LIP_RESET                   0x6c    /* LIP reset. */
#define MBC_SEND_SNS_COMMAND            0x6e    /* Send Simple Name Server */
                                                /* commandd. */
#define MBC_LOGIN_FABRIC_PORT           0x6f    /* Login fabric port. */
#define MBC_SEND_CHANGE_REQUEST         0x70    /* Send Change Request. */
#define MBC_LOGOUT_FABRIC_PORT          0x71    /* Logout fabric port. */
#define MBC_LIP_FULL_LOGIN              0x72    /* Full login LIP. */
#define MBC_LOGIN_LOOP_PORT             0x74    /* Login Loop Port. */
#define MBC_PORT_NODE_NAME_LIST         0x75    /* Get port/node name list. */
#define MBC_INITIALIZE_RECEIVE_QUEUE    0x77    /* Initialize receive queue */
#define MBC_UNLOAD_IP                   0x79    /* Shutdown IP */
#define MBC_GET_ID_LIST                 0x7C    /* Get Port ID list. */
#define MBC_SEND_LFA_COMMAND            0x7D    /* Send Loop Fabric Address */
#define MBC_LUN_RESET                   0x7E    /* Send LUN reset */

/*
 * ISP24xx mailbox commands
 */
#define MBC_SERDES_PARAMS               0x10    /* Serdes Tx Parameters. */
#define MBC_GET_IOCB_STATUS             0x12    /* Get IOCB status command. */
#define MBC_PORT_PARAMS                 0x1A    /* Port iDMA Parameters. */
#define MBC_GET_TIMEOUT_PARAMS          0x22    /* Get FW timeouts. */
#define MBC_TRACE_CONTROL               0x27    /* Trace control command. */
#define MBC_GEN_SYSTEM_ERROR            0x2a    /* Generate System Error. */
#define MBC_WRITE_SFP                   0x30    /* Write SFP Data. */
#define MBC_READ_SFP                    0x31    /* Read SFP Data. */
#define MBC_SET_TIMEOUT_PARAMS          0x32    /* Set FW timeouts. */
#define MBC_MID_INITIALIZE_FIRMWARE     0x48    /* MID Initialize firmware. */
#define MBC_MID_GET_VP_DATABASE         0x49    /* MID Get VP Database. */
#define MBC_MID_GET_VP_ENTRY            0x4a    /* MID Get VP Entry. */
#define MBC_HOST_MEMORY_COPY            0x53    /* Host Memory Copy. */
#define MBC_SEND_RNFT_ELS               0x5e    /* Send RNFT ELS request */
#define MBC_GET_LINK_PRIV_STATS         0x6d    /* Get link & private data. */
#define MBC_SET_VENDOR_ID               0x76    /* Set Vendor ID. */

/* Firmware return data sizes */
#define FCAL_MAP_SIZE   128

/* Mailbox bit definitions for out_mb and in_mb */
#define MBX_31          BIT_31
#define MBX_30          BIT_30
#define MBX_29          BIT_29
#define MBX_28          BIT_28
#define MBX_27          BIT_27
#define MBX_26          BIT_26
#define MBX_25          BIT_25
#define MBX_24          BIT_24
#define MBX_23          BIT_23
#define MBX_22          BIT_22
#define MBX_21          BIT_21
#define MBX_20          BIT_20
#define MBX_19          BIT_19
#define MBX_18          BIT_18
#define MBX_17          BIT_17
#define MBX_16          BIT_16
#define MBX_15          BIT_15
#define MBX_14          BIT_14
#define MBX_13          BIT_13
#define MBX_12          BIT_12
#define MBX_11          BIT_11
#define MBX_10          BIT_10
#define MBX_9           BIT_9
#define MBX_8           BIT_8
#define MBX_7           BIT_7
#define MBX_6           BIT_6
#define MBX_5           BIT_5
#define MBX_4           BIT_4
#define MBX_3           BIT_3
#define MBX_2           BIT_2
#define MBX_1           BIT_1
#define MBX_0           BIT_0

/*
 * Firmware state codes from get firmware state mailbox command
 */
#define FSTATE_CONFIG_WAIT      0
#define FSTATE_WAIT_AL_PA       1
#define FSTATE_WAIT_LOGIN       2
#define FSTATE_READY            3
#define FSTATE_LOSS_OF_SYNC     4
#define FSTATE_ERROR            5
#define FSTATE_REINIT           6
#define FSTATE_NON_PART         7

#define FSTATE_CONFIG_CORRECT      0
#define FSTATE_P2P_RCV_LIP         1
#define FSTATE_P2P_CHOOSE_LOOP     2
#define FSTATE_P2P_RCV_UNIDEN_LIP  3
#define FSTATE_FATAL_ERROR         4
#define FSTATE_LOOP_BACK_CONN      5

/*
 * Port Database structure definition
 * Little endian except where noted.
 */
#define PORT_DATABASE_SIZE      128     /* bytes */
typedef struct {
        uint8_t options;
        uint8_t control;
        uint8_t master_state;
        uint8_t slave_state;
        uint8_t reserved[2];
        uint8_t hard_address;
        uint8_t reserved_1;
        uint8_t port_id[4];
        uint8_t node_name[WWN_SIZE];
        uint8_t port_name[WWN_SIZE];
        uint16_t execution_throttle;
        uint16_t execution_count;
        uint8_t reset_count;
        uint8_t reserved_2;
        uint16_t resource_allocation;
        uint16_t current_allocation;
        uint16_t queue_head;
        uint16_t queue_tail;
        uint16_t transmit_execution_list_next;
        uint16_t transmit_execution_list_previous;
        uint16_t common_features;
        uint16_t total_concurrent_sequences;
        uint16_t RO_by_information_category;
        uint8_t recipient;
        uint8_t initiator;
        uint16_t receive_data_size;
        uint16_t concurrent_sequences;
        uint16_t open_sequences_per_exchange;
        uint16_t lun_abort_flags;
        uint16_t lun_stop_flags;
        uint16_t stop_queue_head;
        uint16_t stop_queue_tail;
        uint16_t port_retry_timer;
        uint16_t next_sequence_id;
        uint16_t frame_count;
        uint16_t PRLI_payload_length;
        uint8_t prli_svc_param_word_0[2];       /* Big endian */
                                                /* Bits 15-0 of word 0 */
        uint8_t prli_svc_param_word_3[2];       /* Big endian */
                                                /* Bits 15-0 of word 3 */
        uint16_t loop_id;
        uint16_t extended_lun_info_list_pointer;
        uint16_t extended_lun_stop_list_pointer;
} port_database_t;

/*
 * Port database slave/master states
 */
#define PD_STATE_DISCOVERY                      0
#define PD_STATE_WAIT_DISCOVERY_ACK             1
#define PD_STATE_PORT_LOGIN                     2
#define PD_STATE_WAIT_PORT_LOGIN_ACK            3
#define PD_STATE_PROCESS_LOGIN                  4
#define PD_STATE_WAIT_PROCESS_LOGIN_ACK         5
#define PD_STATE_PORT_LOGGED_IN                 6
#define PD_STATE_PORT_UNAVAILABLE               7
#define PD_STATE_PROCESS_LOGOUT                 8
#define PD_STATE_WAIT_PROCESS_LOGOUT_ACK        9
#define PD_STATE_PORT_LOGOUT                    10
#define PD_STATE_WAIT_PORT_LOGOUT_ACK           11


#define QLA_ZIO_MODE_6          (BIT_2 | BIT_1)
#define QLA_ZIO_DISABLED        0
#define QLA_ZIO_DEFAULT_TIMER   2

/*
 * ISP Initialization Control Block.
 * Little endian except where noted.
 */
#define ICB_VERSION 1
typedef struct {
        uint8_t  version;
        uint8_t  reserved_1;

        /*
         * LSB BIT 0  = Enable Hard Loop Id
         * LSB BIT 1  = Enable Fairness
         * LSB BIT 2  = Enable Full-Duplex
         * LSB BIT 3  = Enable Fast Posting
         * LSB BIT 4  = Enable Target Mode
         * LSB BIT 5  = Disable Initiator Mode
         * LSB BIT 6  = Enable ADISC
         * LSB BIT 7  = Enable Target Inquiry Data
         *
         * MSB BIT 0  = Enable PDBC Notify
         * MSB BIT 1  = Non Participating LIP
         * MSB BIT 2  = Descending Loop ID Search
         * MSB BIT 3  = Acquire Loop ID in LIPA
         * MSB BIT 4  = Stop PortQ on Full Status
         * MSB BIT 5  = Full Login after LIP
         * MSB BIT 6  = Node Name Option
         * MSB BIT 7  = Ext IFWCB enable bit
         */
        uint8_t  firmware_options[2];

        uint16_t frame_payload_size;
        uint16_t max_iocb_allocation;
        uint16_t execution_throttle;
        uint8_t  retry_count;
        uint8_t  retry_delay;                   /* unused */
        uint8_t  port_name[WWN_SIZE];           /* Big endian. */
        uint16_t hard_address;
        uint8_t  inquiry_data;
        uint8_t  login_timeout;
        uint8_t  node_name[WWN_SIZE];           /* Big endian. */

        uint16_t request_q_outpointer;
        uint16_t response_q_inpointer;
        uint16_t request_q_length;
        uint16_t response_q_length;
        uint32_t request_q_address[2];
        uint32_t response_q_address[2];

        uint16_t lun_enables;
        uint8_t  command_resource_count;
        uint8_t  immediate_notify_resource_count;
        uint16_t timeout;
        uint8_t  reserved_2[2];

        /*
         * LSB BIT 0 = Timer Operation mode bit 0
         * LSB BIT 1 = Timer Operation mode bit 1
         * LSB BIT 2 = Timer Operation mode bit 2
         * LSB BIT 3 = Timer Operation mode bit 3
         * LSB BIT 4 = Init Config Mode bit 0
         * LSB BIT 5 = Init Config Mode bit 1
         * LSB BIT 6 = Init Config Mode bit 2
         * LSB BIT 7 = Enable Non part on LIHA failure
         *
         * MSB BIT 0 = Enable class 2
         * MSB BIT 1 = Enable ACK0
         * MSB BIT 2 =
         * MSB BIT 3 =
         * MSB BIT 4 = FC Tape Enable
         * MSB BIT 5 = Enable FC Confirm
         * MSB BIT 6 = Enable command queuing in target mode
         * MSB BIT 7 = No Logo On Link Down
         */
        uint8_t  add_firmware_options[2];

        uint8_t  response_accumulation_timer;
        uint8_t  interrupt_delay_timer;

        /*
         * LSB BIT 0 = Enable Read xfr_rdy
         * LSB BIT 1 = Soft ID only
         * LSB BIT 2 =
         * LSB BIT 3 =
         * LSB BIT 4 = FCP RSP Payload [0]
         * LSB BIT 5 = FCP RSP Payload [1] / Sbus enable - 2200
         * LSB BIT 6 = Enable Out-of-Order frame handling
         * LSB BIT 7 = Disable Automatic PLOGI on Local Loop
         *
         * MSB BIT 0 = Sbus enable - 2300
         * MSB BIT 1 =
         * MSB BIT 2 =
         * MSB BIT 3 =
         * MSB BIT 4 = LED mode
         * MSB BIT 5 = enable 50 ohm termination
         * MSB BIT 6 = Data Rate (2300 only)
         * MSB BIT 7 = Data Rate (2300 only)
         */
        uint8_t  special_options[2];

        uint8_t  reserved_3[26];
} init_cb_t;

/*
 * Get Link Status mailbox command return buffer.
 */
#define GLSO_SEND_RPS   BIT_0
#define GLSO_USE_DID    BIT_3

struct link_statistics {
        uint32_t link_fail_cnt;
        uint32_t loss_sync_cnt;
        uint32_t loss_sig_cnt;
        uint32_t prim_seq_err_cnt;
        uint32_t inval_xmit_word_cnt;
        uint32_t inval_crc_cnt;
        uint32_t lip_cnt;
        uint32_t unused1[0x1a];
        uint32_t tx_frames;
        uint32_t rx_frames;
        uint32_t dumped_frames;
        uint32_t unused2[2];
        uint32_t nos_rcvd;
};

/*
 * NVRAM Command values.
 */
#define NV_START_BIT            BIT_2
#define NV_WRITE_OP             (BIT_26+BIT_24)
#define NV_READ_OP              (BIT_26+BIT_25)
#define NV_ERASE_OP             (BIT_26+BIT_25+BIT_24)
#define NV_MASK_OP              (BIT_26+BIT_25+BIT_24)
#define NV_DELAY_COUNT          10

/*
 * QLogic ISP2100, ISP2200 and ISP2300 NVRAM structure definition.
 */
typedef struct {
        /*
         * NVRAM header
         */
        uint8_t id[4];
        uint8_t nvram_version;
        uint8_t reserved_0;

        /*
         * NVRAM RISC parameter block
         */
        uint8_t parameter_block_version;
        uint8_t reserved_1;

        /*
         * LSB BIT 0  = Enable Hard Loop Id
         * LSB BIT 1  = Enable Fairness
         * LSB BIT 2  = Enable Full-Duplex
         * LSB BIT 3  = Enable Fast Posting
         * LSB BIT 4  = Enable Target Mode
         * LSB BIT 5  = Disable Initiator Mode
         * LSB BIT 6  = Enable ADISC
         * LSB BIT 7  = Enable Target Inquiry Data
         *
         * MSB BIT 0  = Enable PDBC Notify
         * MSB BIT 1  = Non Participating LIP
         * MSB BIT 2  = Descending Loop ID Search
         * MSB BIT 3  = Acquire Loop ID in LIPA
         * MSB BIT 4  = Stop PortQ on Full Status
         * MSB BIT 5  = Full Login after LIP
         * MSB BIT 6  = Node Name Option
         * MSB BIT 7  = Ext IFWCB enable bit
         */
        uint8_t  firmware_options[2];

        uint16_t frame_payload_size;
        uint16_t max_iocb_allocation;
        uint16_t execution_throttle;
        uint8_t  retry_count;
        uint8_t  retry_delay;                   /* unused */
        uint8_t  port_name[WWN_SIZE];           /* Big endian. */
        uint16_t hard_address;
        uint8_t  inquiry_data;
        uint8_t  login_timeout;
        uint8_t  node_name[WWN_SIZE];           /* Big endian. */

        /*
         * LSB BIT 0 = Timer Operation mode bit 0
         * LSB BIT 1 = Timer Operation mode bit 1
         * LSB BIT 2 = Timer Operation mode bit 2
         * LSB BIT 3 = Timer Operation mode bit 3
         * LSB BIT 4 = Init Config Mode bit 0
         * LSB BIT 5 = Init Config Mode bit 1
         * LSB BIT 6 = Init Config Mode bit 2
         * LSB BIT 7 = Enable Non part on LIHA failure
         *
         * MSB BIT 0 = Enable class 2
         * MSB BIT 1 = Enable ACK0
         * MSB BIT 2 =
         * MSB BIT 3 =
         * MSB BIT 4 = FC Tape Enable
         * MSB BIT 5 = Enable FC Confirm
         * MSB BIT 6 = Enable command queuing in target mode
         * MSB BIT 7 = No Logo On Link Down
         */
        uint8_t  add_firmware_options[2];

        uint8_t  response_accumulation_timer;
        uint8_t  interrupt_delay_timer;

        /*
         * LSB BIT 0 = Enable Read xfr_rdy
         * LSB BIT 1 = Soft ID only
         * LSB BIT 2 =
         * LSB BIT 3 =
         * LSB BIT 4 = FCP RSP Payload [0]
         * LSB BIT 5 = FCP RSP Payload [1] / Sbus enable - 2200
         * LSB BIT 6 = Enable Out-of-Order frame handling
         * LSB BIT 7 = Disable Automatic PLOGI on Local Loop
         *
         * MSB BIT 0 = Sbus enable - 2300
         * MSB BIT 1 =
         * MSB BIT 2 =
         * MSB BIT 3 =
         * MSB BIT 4 = LED mode
         * MSB BIT 5 = enable 50 ohm termination
         * MSB BIT 6 = Data Rate (2300 only)
         * MSB BIT 7 = Data Rate (2300 only)
         */
        uint8_t  special_options[2];

        /* Reserved for expanded RISC parameter block */
        uint8_t reserved_2[22];

        /*
         * LSB BIT 0 = Tx Sensitivity 1G bit 0
         * LSB BIT 1 = Tx Sensitivity 1G bit 1
         * LSB BIT 2 = Tx Sensitivity 1G bit 2
         * LSB BIT 3 = Tx Sensitivity 1G bit 3
         * LSB BIT 4 = Rx Sensitivity 1G bit 0
         * LSB BIT 5 = Rx Sensitivity 1G bit 1
         * LSB BIT 6 = Rx Sensitivity 1G bit 2
         * LSB BIT 7 = Rx Sensitivity 1G bit 3
         *
         * MSB BIT 0 = Tx Sensitivity 2G bit 0
         * MSB BIT 1 = Tx Sensitivity 2G bit 1
         * MSB BIT 2 = Tx Sensitivity 2G bit 2
         * MSB BIT 3 = Tx Sensitivity 2G bit 3
         * MSB BIT 4 = Rx Sensitivity 2G bit 0
         * MSB BIT 5 = Rx Sensitivity 2G bit 1
         * MSB BIT 6 = Rx Sensitivity 2G bit 2
         * MSB BIT 7 = Rx Sensitivity 2G bit 3
         *
         * LSB BIT 0 = Output Swing 1G bit 0
         * LSB BIT 1 = Output Swing 1G bit 1
         * LSB BIT 2 = Output Swing 1G bit 2

         * LSB BIT 3 = Output Emphasis 1G bit 0
         * LSB BIT 4 = Output Emphasis 1G bit 1
         * LSB BIT 5 = Output Swing 2G bit 0
         * LSB BIT 6 = Output Swing 2G bit 1
         * LSB BIT 7 = Output Swing 2G bit 2
         *
         * MSB BIT 0 = Output Emphasis 2G bit 0
         * MSB BIT 1 = Output Emphasis 2G bit 1
         * MSB BIT 2 = Output Enable
         * MSB BIT 3 =
         * MSB BIT 4 =
         * MSB BIT 5 =
         * MSB BIT 6 =
         * MSB BIT 7 =
         */
        uint8_t seriallink_options[4];

        /*
         * NVRAM host parameter block
         *
         * LSB BIT 0 = Enable spinup delay
         * LSB BIT 1 = Disable BIOS
         * LSB BIT 2 = Enable Memory Map BIOS
         * LSB BIT 3 = Enable Selectable Boot
         * LSB BIT 4 = Disable RISC code load
         * LSB BIT 5 = Set cache line size 1
         * LSB BIT 6 = PCI Parity Disable
         * LSB BIT 7 = Enable extended logging
         *
         * MSB BIT 0 = Enable 64bit addressing
         * MSB BIT 1 = Enable lip reset
         * MSB BIT 2 = Enable lip full login
         * MSB BIT 3 = Enable target reset
         * MSB BIT 4 = Enable database storage
         * MSB BIT 5 = Enable cache flush read
         * MSB BIT 6 = Enable database load
         * MSB BIT 7 = Enable alternate WWN
         */
        uint8_t host_p[2];

        uint8_t boot_node_name[WWN_SIZE];
        uint8_t boot_lun_number;
        uint8_t reset_delay;
        uint8_t port_down_retry_count;
        uint8_t boot_id_number;
        uint16_t max_luns_per_target;
        uint8_t fcode_boot_port_name[WWN_SIZE];
        uint8_t alternate_port_name[WWN_SIZE];
        uint8_t alternate_node_name[WWN_SIZE];

        /*
         * BIT 0 = Selective Login
         * BIT 1 = Alt-Boot Enable
         * BIT 2 =
         * BIT 3 = Boot Order List
         * BIT 4 =
         * BIT 5 = Selective LUN
         * BIT 6 =
         * BIT 7 = unused
         */
        uint8_t efi_parameters;

        uint8_t link_down_timeout;

        uint8_t adapter_id[16];

        uint8_t alt1_boot_node_name[WWN_SIZE];
        uint16_t alt1_boot_lun_number;
        uint8_t alt2_boot_node_name[WWN_SIZE];
        uint16_t alt2_boot_lun_number;
        uint8_t alt3_boot_node_name[WWN_SIZE];
        uint16_t alt3_boot_lun_number;
        uint8_t alt4_boot_node_name[WWN_SIZE];
        uint16_t alt4_boot_lun_number;
        uint8_t alt5_boot_node_name[WWN_SIZE];
        uint16_t alt5_boot_lun_number;
        uint8_t alt6_boot_node_name[WWN_SIZE];
        uint16_t alt6_boot_lun_number;
        uint8_t alt7_boot_node_name[WWN_SIZE];
        uint16_t alt7_boot_lun_number;

        uint8_t reserved_3[2];

        /* Offset 200-215 : Model Number */
        uint8_t model_number[16];

        /* OEM related items */
        uint8_t oem_specific[16];

        /*
         * NVRAM Adapter Features offset 232-239
         *
         * LSB BIT 0 = External GBIC
         * LSB BIT 1 = Risc RAM parity
         * LSB BIT 2 = Buffer Plus Module
         * LSB BIT 3 = Multi Chip Adapter
         * LSB BIT 4 = Internal connector
         * LSB BIT 5 =
         * LSB BIT 6 =
         * LSB BIT 7 =
         *
         * MSB BIT 0 =
         * MSB BIT 1 =
         * MSB BIT 2 =
         * MSB BIT 3 =
         * MSB BIT 4 =
         * MSB BIT 5 =
         * MSB BIT 6 =
         * MSB BIT 7 =
         */
        uint8_t adapter_features[2];

        uint8_t reserved_4[16];

        /* Subsystem vendor ID for ISP2200 */
        uint16_t subsystem_vendor_id_2200;

        /* Subsystem device ID for ISP2200 */
        uint16_t subsystem_device_id_2200;

        uint8_t  reserved_5;
        uint8_t  checksum;
} nvram_t;

/*
 * ISP queue - response queue entry definition.
 */
typedef struct {
        uint8_t         data[60];
        uint32_t        signature;
#define RESPONSE_PROCESSED      0xDEADDEAD      /* Signature */
} response_t;

typedef union {
        uint16_t extended;
        struct {
                uint8_t reserved;
                uint8_t standard;
        } id;
} target_id_t;

#define SET_TARGET_ID(ha, to, from)                     \
do {                                                    \
        if (HAS_EXTENDED_IDS(ha))                       \
                to.extended = cpu_to_le16(from);        \
        else                                            \
                to.id.standard = (uint8_t)from;         \
} while (0)

/*
 * ISP queue - command entry structure definition.
 */
#define COMMAND_TYPE    0x11            /* Command entry */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t sys_define;             /* System defined. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t handle;                /* System handle. */
        target_id_t target;             /* SCSI ID */
        uint16_t lun;                   /* SCSI LUN */
        uint16_t control_flags;         /* Control flags. */
#define CF_WRITE        BIT_6
#define CF_READ         BIT_5
#define CF_SIMPLE_TAG   BIT_3
#define CF_ORDERED_TAG  BIT_2
#define CF_HEAD_TAG     BIT_1
        uint16_t reserved_1;
        uint16_t timeout;               /* Command timeout. */
        uint16_t dseg_count;            /* Data segment count. */
        uint8_t scsi_cdb[MAX_CMDSZ];    /* SCSI command words. */
        uint32_t byte_count;            /* Total byte count. */
        uint32_t dseg_0_address;        /* Data segment 0 address. */
        uint32_t dseg_0_length;         /* Data segment 0 length. */
        uint32_t dseg_1_address;        /* Data segment 1 address. */
        uint32_t dseg_1_length;         /* Data segment 1 length. */
        uint32_t dseg_2_address;        /* Data segment 2 address. */
        uint32_t dseg_2_length;         /* Data segment 2 length. */
} cmd_entry_t;

/*
 * ISP queue - 64-Bit addressing, command entry structure definition.
 */
#define COMMAND_A64_TYPE        0x19    /* Command A64 entry */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t sys_define;             /* System defined. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t handle;                /* System handle. */
        target_id_t target;             /* SCSI ID */
        uint16_t lun;                   /* SCSI LUN */
        uint16_t control_flags;         /* Control flags. */
        uint16_t reserved_1;
        uint16_t timeout;               /* Command timeout. */
        uint16_t dseg_count;            /* Data segment count. */
        uint8_t scsi_cdb[MAX_CMDSZ];    /* SCSI command words. */
        uint32_t byte_count;            /* Total byte count. */
        uint32_t dseg_0_address[2];     /* Data segment 0 address. */
        uint32_t dseg_0_length;         /* Data segment 0 length. */
        uint32_t dseg_1_address[2];     /* Data segment 1 address. */
        uint32_t dseg_1_length;         /* Data segment 1 length. */
} cmd_a64_entry_t, request_t;

/*
 * ISP queue - continuation entry structure definition.
 */
#define CONTINUE_TYPE           0x02    /* Continuation entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t sys_define;             /* System defined. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t reserved;
        uint32_t dseg_0_address;        /* Data segment 0 address. */
        uint32_t dseg_0_length;         /* Data segment 0 length. */
        uint32_t dseg_1_address;        /* Data segment 1 address. */
        uint32_t dseg_1_length;         /* Data segment 1 length. */
        uint32_t dseg_2_address;        /* Data segment 2 address. */
        uint32_t dseg_2_length;         /* Data segment 2 length. */
        uint32_t dseg_3_address;        /* Data segment 3 address. */
        uint32_t dseg_3_length;         /* Data segment 3 length. */
        uint32_t dseg_4_address;        /* Data segment 4 address. */
        uint32_t dseg_4_length;         /* Data segment 4 length. */
        uint32_t dseg_5_address;        /* Data segment 5 address. */
        uint32_t dseg_5_length;         /* Data segment 5 length. */
        uint32_t dseg_6_address;        /* Data segment 6 address. */
        uint32_t dseg_6_length;         /* Data segment 6 length. */
} cont_entry_t;

/*
 * ISP queue - 64-Bit addressing, continuation entry structure definition.
 */
#define CONTINUE_A64_TYPE       0x0A    /* Continuation A64 entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t sys_define;             /* System defined. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t dseg_0_address[2];     /* Data segment 0 address. */
        uint32_t dseg_0_length;         /* Data segment 0 length. */
        uint32_t dseg_1_address[2];     /* Data segment 1 address. */
        uint32_t dseg_1_length;         /* Data segment 1 length. */
        uint32_t dseg_2_address [2];    /* Data segment 2 address. */
        uint32_t dseg_2_length;         /* Data segment 2 length. */
        uint32_t dseg_3_address[2];     /* Data segment 3 address. */
        uint32_t dseg_3_length;         /* Data segment 3 length. */
        uint32_t dseg_4_address[2];     /* Data segment 4 address. */
        uint32_t dseg_4_length;         /* Data segment 4 length. */
} cont_a64_entry_t;

/*
 * ISP queue - status entry structure definition.
 */
#define STATUS_TYPE     0x03            /* Status entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t sys_define;             /* System defined. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t handle;                /* System handle. */
        uint16_t scsi_status;           /* SCSI status. */
        uint16_t comp_status;           /* Completion status. */
        uint16_t state_flags;           /* State flags. */
        uint16_t status_flags;          /* Status flags. */
        uint16_t rsp_info_len;          /* Response Info Length. */
        uint16_t req_sense_length;      /* Request sense data length. */
        uint32_t residual_length;       /* Residual transfer length. */
        uint8_t rsp_info[8];            /* FCP response information. */
        uint8_t req_sense_data[32];     /* Request sense data. */
} sts_entry_t;

/*
 * Status entry entry status
 */
#define RF_RQ_DMA_ERROR BIT_6           /* Request Queue DMA error. */
#define RF_INV_E_ORDER  BIT_5           /* Invalid entry order. */
#define RF_INV_E_COUNT  BIT_4           /* Invalid entry count. */
#define RF_INV_E_PARAM  BIT_3           /* Invalid entry parameter. */
#define RF_INV_E_TYPE   BIT_2           /* Invalid entry type. */
#define RF_BUSY         BIT_1           /* Busy */
#define RF_MASK         (RF_RQ_DMA_ERROR | RF_INV_E_ORDER | RF_INV_E_COUNT | \
                         RF_INV_E_PARAM | RF_INV_E_TYPE | RF_BUSY)
#define RF_MASK_24XX    (RF_INV_E_ORDER | RF_INV_E_COUNT | RF_INV_E_PARAM | \
                         RF_INV_E_TYPE)

/*
 * Status entry SCSI status bit definitions.
 */
#define SS_MASK                         0xfff   /* Reserved bits BIT_12-BIT_15*/
#define SS_RESIDUAL_UNDER               BIT_11
#define SS_RESIDUAL_OVER                BIT_10
#define SS_SENSE_LEN_VALID              BIT_9
#define SS_RESPONSE_INFO_LEN_VALID      BIT_8

#define SS_RESERVE_CONFLICT             (BIT_4 | BIT_3)
#define SS_BUSY_CONDITION               BIT_3
#define SS_CONDITION_MET                BIT_2
#define SS_CHECK_CONDITION              BIT_1

/*
 * Status entry completion status
 */
#define CS_COMPLETE             0x0     /* No errors */
#define CS_INCOMPLETE           0x1     /* Incomplete transfer of cmd. */
#define CS_DMA                  0x2     /* A DMA direction error. */
#define CS_TRANSPORT            0x3     /* Transport error. */
#define CS_RESET                0x4     /* SCSI bus reset occurred */
#define CS_ABORTED              0x5     /* System aborted command. */
#define CS_TIMEOUT              0x6     /* Timeout error. */
#define CS_DATA_OVERRUN         0x7     /* Data overrun. */

#define CS_DATA_UNDERRUN        0x15    /* Data Underrun. */
#define CS_QUEUE_FULL           0x1C    /* Queue Full. */
#define CS_PORT_UNAVAILABLE     0x28    /* Port unavailable */
                                        /* (selection timeout) */
#define CS_PORT_LOGGED_OUT      0x29    /* Port Logged Out */
#define CS_PORT_CONFIG_CHG      0x2A    /* Port Configuration Changed */
#define CS_PORT_BUSY            0x2B    /* Port Busy */
#define CS_COMPLETE_CHKCOND     0x30    /* Error? */
#define CS_BAD_PAYLOAD          0x80    /* Driver defined */
#define CS_UNKNOWN              0x81    /* Driver defined */
#define CS_RETRY                0x82    /* Driver defined */
#define CS_LOOP_DOWN_ABORT      0x83    /* Driver defined */

/*
 * Status entry status flags
 */
#define SF_ABTS_TERMINATED      BIT_10
#define SF_LOGOUT_SENT          BIT_13

/*
 * ISP queue - status continuation entry structure definition.
 */
#define STATUS_CONT_TYPE        0x10    /* Status continuation entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t sys_define;             /* System defined. */
        uint8_t entry_status;           /* Entry Status. */
        uint8_t data[60];               /* data */
} sts_cont_entry_t;

/*
 * ISP queue -  RIO Type 1 status entry (32 bit I/O entry handles)
 *              structure definition.
 */
#define STATUS_TYPE_21 0x21             /* Status entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t handle_count;           /* Handle count. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t handle[15];            /* System handles. */
} sts21_entry_t;

/*
 * ISP queue -  RIO Type 2 status entry (16 bit I/O entry handles)
 *              structure definition.
 */
#define STATUS_TYPE_22  0x22            /* Status entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t handle_count;           /* Handle count. */
        uint8_t entry_status;           /* Entry Status. */
        uint16_t handle[30];            /* System handles. */
} sts22_entry_t;

/*
 * ISP queue - marker entry structure definition.
 */
#define MARKER_TYPE     0x04            /* Marker entry. */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t handle_count;           /* Handle count. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t sys_define_2;          /* System defined. */
        target_id_t target;             /* SCSI ID */
        uint8_t modifier;               /* Modifier (7-0). */
#define MK_SYNC_ID_LUN  0               /* Synchronize ID/LUN */
#define MK_SYNC_ID      1               /* Synchronize ID */
#define MK_SYNC_ALL     2               /* Synchronize all ID/LUN */
#define MK_SYNC_LIP     3               /* Synchronize all ID/LUN, */
                                        /* clear port changed, */
                                        /* use sequence number. */
        uint8_t reserved_1;
        uint16_t sequence_number;       /* Sequence number of event */
        uint16_t lun;                   /* SCSI LUN */
        uint8_t reserved_2[48];
} mrk_entry_t;

/*
 * ISP queue - Management Server entry structure definition.
 */
#define MS_IOCB_TYPE            0x29    /* Management Server IOCB entry */
typedef struct {
        uint8_t entry_type;             /* Entry type. */
        uint8_t entry_count;            /* Entry count. */
        uint8_t handle_count;           /* Handle count. */
        uint8_t entry_status;           /* Entry Status. */
        uint32_t handle1;               /* System handle. */
        target_id_t loop_id;
        uint16_t status;
        uint16_t control_flags;         /* Control flags. */
        uint16_t reserved2;
        uint16_t timeout;
        uint16_t cmd_dsd_count;
        uint16_t total_dsd_count;
        uint8_t type;
        uint8_t r_ctl;
        uint16_t rx_id;
        uint16_t reserved3;
        uint32_t handle2;
        uint32_t rsp_bytecount;
        uint32_t req_bytecount;
        uint32_t dseg_req_address[2];   /* Data segment 0 address. */
        uint32_t dseg_req_length;       /* Data segment 0 length. */
        uint32_t dseg_rsp_address[2];   /* Data segment 1 address. */
        uint32_t dseg_rsp_length;       /* Data segment 1 length. */
} ms_iocb_entry_t;


/*
 * ISP queue - Mailbox Command entry structure definition.
 */
#define MBX_IOCB_TYPE   0x39
struct mbx_entry {
        uint8_t entry_type;
        uint8_t entry_count;
        uint8_t sys_define1;
        /* Use sys_define1 for source type */
#define SOURCE_SCSI     0x00
#define SOURCE_IP       0x01
#define SOURCE_VI       0x02
#define SOURCE_SCTP     0x03
#define SOURCE_MP       0x04
#define SOURCE_MPIOCTL  0x05
#define SOURCE_ASYNC_IOCB 0x07

        uint8_t entry_status;

        uint32_t handle;
        target_id_t loop_id;

        uint16_t status;
        uint16_t state_flags;
        uint16_t status_flags;

        uint32_t sys_define2[2];

        uint16_t mb0;
        uint16_t mb1;
        uint16_t mb2;
        uint16_t mb3;
        uint16_t mb6;
        uint16_t mb7;
        uint16_t mb9;
        uint16_t mb10;
        uint32_t reserved_2[2];
        uint8_t node_name[WWN_SIZE];
        uint8_t port_name[WWN_SIZE];
};

/*
 * ISP request and response queue entry sizes
 */
#define RESPONSE_ENTRY_SIZE     (sizeof(response_t))
#define REQUEST_ENTRY_SIZE      (sizeof(request_t))


/*
 * 24 bit port ID type definition.
 */
typedef union {
        uint32_t b24 : 24;

        struct {
#ifdef __BIG_ENDIAN
                uint8_t domain;
                uint8_t area;
                uint8_t al_pa;
#elif __LITTLE_ENDIAN
                uint8_t al_pa;
                uint8_t area;
                uint8_t domain;
#else
#error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined!"
#endif
                uint8_t rsvd_1;
        } b;
} port_id_t;
#define INVALID_PORT_ID 0xFFFFFF

/*
 * Switch info gathering structure.
 */
typedef struct {
        port_id_t d_id;
        uint8_t node_name[WWN_SIZE];
        uint8_t port_name[WWN_SIZE];
        uint8_t fabric_port_name[WWN_SIZE];
        uint16_t fp_speed;
} sw_info_t;

/*
 * Fibre channel port type.
 */
 typedef enum {
        FCT_UNKNOWN,
        FCT_RSCN,
        FCT_SWITCH,
        FCT_BROADCAST,
        FCT_INITIATOR,
        FCT_TARGET
} fc_port_type_t;

/*
 * Fibre channel port structure.
 */
typedef struct fc_port {
        struct list_head list;
        struct scsi_qla_host *vha;

        uint8_t node_name[WWN_SIZE];
        uint8_t port_name[WWN_SIZE];
        port_id_t d_id;
        uint16_t loop_id;
        uint16_t old_loop_id;

        uint8_t fabric_port_name[WWN_SIZE];
        uint16_t fp_speed;

        fc_port_type_t port_type;

        atomic_t state;
        uint32_t flags;

        int port_login_retry_count;
        int login_retry;
        atomic_t port_down_timer;

        struct fc_rport *rport, *drport;
        u32 supported_classes;

        unsigned long last_queue_full;
        unsigned long last_ramp_up;

        uint16_t vp_idx;
} fc_port_t;

/*
 * Fibre channel port/lun states.
 */
#define FCS_UNCONFIGURED        1
#define FCS_DEVICE_DEAD         2
#define FCS_DEVICE_LOST         3
#define FCS_ONLINE              4

/*
 * FC port flags.
 */
#define FCF_FABRIC_DEVICE       BIT_0
#define FCF_LOGIN_NEEDED        BIT_1
#define FCF_TAPE_PRESENT        BIT_2

/* No loop ID flag. */
#define FC_NO_LOOP_ID           0x1000

/*
 * FC-CT interface
 *
 * NOTE: All structures are big-endian in form.
 */

#define CT_REJECT_RESPONSE      0x8001
#define CT_ACCEPT_RESPONSE      0x8002
#define CT_REASON_INVALID_COMMAND_CODE  0x01
#define CT_REASON_CANNOT_PERFORM        0x09
#define CT_REASON_COMMAND_UNSUPPORTED   0x0b
#define CT_EXPL_ALREADY_REGISTERED      0x10

#define NS_N_PORT_TYPE  0x01
#define NS_NL_PORT_TYPE 0x02
#define NS_NX_PORT_TYPE 0x7F

#define GA_NXT_CMD      0x100
#define GA_NXT_REQ_SIZE (16 + 4)
#define GA_NXT_RSP_SIZE (16 + 620)

#define GID_PT_CMD      0x1A1
#define GID_PT_REQ_SIZE (16 + 4)
#define GID_PT_RSP_SIZE (16 + (MAX_FIBRE_DEVICES * 4))

#define GPN_ID_CMD      0x112
#define GPN_ID_REQ_SIZE (16 + 4)
#define GPN_ID_RSP_SIZE (16 + 8)

#define GNN_ID_CMD      0x113
#define GNN_ID_REQ_SIZE (16 + 4)
#define GNN_ID_RSP_SIZE (16 + 8)

#define GFT_ID_CMD      0x117
#define GFT_ID_REQ_SIZE (16 + 4)
#define GFT_ID_RSP_SIZE (16 + 32)

#define RFT_ID_CMD      0x217
#define RFT_ID_REQ_SIZE (16 + 4 + 32)
#define RFT_ID_RSP_SIZE 16

#define RFF_ID_CMD      0x21F
#define RFF_ID_REQ_SIZE (16 + 4 + 2 + 1 + 1)
#define RFF_ID_RSP_SIZE 16

#define RNN_ID_CMD      0x213
#define RNN_ID_REQ_SIZE (16 + 4 + 8)
#define RNN_ID_RSP_SIZE 16

#define RSNN_NN_CMD      0x239
#define RSNN_NN_REQ_SIZE (16 + 8 + 1 + 255)
#define RSNN_NN_RSP_SIZE 16

#define GFPN_ID_CMD     0x11C
#define GFPN_ID_REQ_SIZE (16 + 4)
#define GFPN_ID_RSP_SIZE (16 + 8)

#define GPSC_CMD        0x127
#define GPSC_REQ_SIZE   (16 + 8)
#define GPSC_RSP_SIZE   (16 + 2 + 2)


/*
 * HBA attribute types.
 */
#define FDMI_HBA_ATTR_COUNT                     9
#define FDMI_HBA_NODE_NAME                      1
#define FDMI_HBA_MANUFACTURER                   2
#define FDMI_HBA_SERIAL_NUMBER                  3
#define FDMI_HBA_MODEL                          4
#define FDMI_HBA_MODEL_DESCRIPTION              5
#define FDMI_HBA_HARDWARE_VERSION               6
#define FDMI_HBA_DRIVER_VERSION                 7
#define FDMI_HBA_OPTION_ROM_VERSION             8
#define FDMI_HBA_FIRMWARE_VERSION               9
#define FDMI_HBA_OS_NAME_AND_VERSION            0xa
#define FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH      0xb

struct ct_fdmi_hba_attr {
        uint16_t type;
        uint16_t len;
        union {
                uint8_t node_name[WWN_SIZE];
                uint8_t manufacturer[32];
                uint8_t serial_num[8];
                uint8_t model[16];
                uint8_t model_desc[80];
                uint8_t hw_version[16];
                uint8_t driver_version[32];
                uint8_t orom_version[16];
                uint8_t fw_version[16];
                uint8_t os_version[128];
                uint8_t max_ct_len[4];
        } a;
};

struct ct_fdmi_hba_attributes {
        uint32_t count;
        struct ct_fdmi_hba_attr entry[FDMI_HBA_ATTR_COUNT];
};

/*
 * Port attribute types.
 */
#define FDMI_PORT_ATTR_COUNT            6
#define FDMI_PORT_FC4_TYPES             1
#define FDMI_PORT_SUPPORT_SPEED         2
#define FDMI_PORT_CURRENT_SPEED         3
#define FDMI_PORT_MAX_FRAME_SIZE        4
#define FDMI_PORT_OS_DEVICE_NAME        5
#define FDMI_PORT_HOST_NAME             6

#define FDMI_PORT_SPEED_1GB             0x1
#define FDMI_PORT_SPEED_2GB             0x2
#define FDMI_PORT_SPEED_10GB            0x4
#define FDMI_PORT_SPEED_4GB             0x8
#define FDMI_PORT_SPEED_8GB             0x10
#define FDMI_PORT_SPEED_16GB            0x20
#define FDMI_PORT_SPEED_UNKNOWN         0x8000

struct ct_fdmi_port_attr {
        uint16_t type;
        uint16_t len;
        union {
                uint8_t fc4_types[32];
                uint32_t sup_speed;
                uint32_t cur_speed;
                uint32_t max_frame_size;
                uint8_t os_dev_name[32];
                uint8_t host_name[32];
        } a;
};

/*
 * Port Attribute Block.
 */
struct ct_fdmi_port_attributes {
        uint32_t count;
        struct ct_fdmi_port_attr entry[FDMI_PORT_ATTR_COUNT];
};

/* FDMI definitions. */
#define GRHL_CMD        0x100
#define GHAT_CMD        0x101
#define GRPL_CMD        0x102
#define GPAT_CMD        0x110

#define RHBA_CMD        0x200
#define RHBA_RSP_SIZE   16

#define RHAT_CMD        0x201
#define RPRT_CMD        0x210

#define RPA_CMD         0x211
#define RPA_RSP_SIZE    16

#define DHBA_CMD        0x300
#define DHBA_REQ_SIZE   (16 + 8)
#define DHBA_RSP_SIZE   16

#define DHAT_CMD        0x301
#define DPRT_CMD        0x310
#define DPA_CMD         0x311

/* CT command header -- request/response common fields */
struct ct_cmd_hdr {
        uint8_t revision;
        uint8_t in_id[3];
        uint8_t gs_type;
        uint8_t gs_subtype;
        uint8_t options;
        uint8_t reserved;
};

/* CT command request */
struct ct_sns_req {
        struct ct_cmd_hdr header;
        uint16_t command;
        uint16_t max_rsp_size;
        uint8_t fragment_id;
        uint8_t reserved[3];

        union {
                /* GA_NXT, GPN_ID, GNN_ID, GFT_ID, GFPN_ID */
                struct {
                        uint8_t reserved;
                        uint8_t port_id[3];
                } port_id;

                struct {
                        uint8_t port_type;
                        uint8_t domain;
                        uint8_t area;
                        uint8_t reserved;
                } gid_pt;

                struct {
                        uint8_t reserved;
                        uint8_t port_id[3];
                        uint8_t fc4_types[32];
                } rft_id;

                struct {
                        uint8_t reserved;
                        uint8_t port_id[3];
                        uint16_t reserved2;
                        uint8_t fc4_feature;
                        uint8_t fc4_type;
                } rff_id;

                struct {
                        uint8_t reserved;
                        uint8_t port_id[3];
                        uint8_t node_name[8];
                } rnn_id;

                struct {
                        uint8_t node_name[8];
                        uint8_t name_len;
                        uint8_t sym_node_name[255];
                } rsnn_nn;

                struct {
                        uint8_t hba_indentifier[8];
                } ghat;

                struct {
                        uint8_t hba_identifier[8];
                        uint32_t entry_count;
                        uint8_t port_name[8];
                        struct ct_fdmi_hba_attributes attrs;
                } rhba;

                struct {
                        uint8_t hba_identifier[8];
                        struct ct_fdmi_hba_attributes attrs;
                } rhat;

                struct {
                        uint8_t port_name[8];
                        struct ct_fdmi_port_attributes attrs;
                } rpa;

                struct {
                        uint8_t port_name[8];
                } dhba;

                struct {
                        uint8_t port_name[8];
                } dhat;

                struct {
                        uint8_t port_name[8];
                } dprt;

                struct {
                        uint8_t port_name[8];
                } dpa;

                struct {
                        uint8_t port_name[8];
                } gpsc;
        } req;
};

/* CT command response header */
struct ct_rsp_hdr {
        struct ct_cmd_hdr header;
        uint16_t response;
        uint16_t residual;
        uint8_t fragment_id;
        uint8_t reason_code;
        uint8_t explanation_code;
        uint8_t vendor_unique;
};

struct ct_sns_gid_pt_data {
        uint8_t control_byte;
        uint8_t port_id[3];
};

struct ct_sns_rsp {
        struct ct_rsp_hdr header;

        union {
                struct {
                        uint8_t port_type;
                        uint8_t port_id[3];
                        uint8_t port_name[8];
                        uint8_t sym_port_name_len;
                        uint8_t sym_port_name[255];
                        uint8_t node_name[8];
                        uint8_t sym_node_name_len;
                        uint8_t sym_node_name[255];
                        uint8_t init_proc_assoc[8];
                        uint8_t node_ip_addr[16];
                        uint8_t class_of_service[4];
                        uint8_t fc4_types[32];
                        uint8_t ip_address[16];
                        uint8_t fabric_port_name[8];
                        uint8_t reserved;
                        uint8_t hard_address[3];
                } ga_nxt;

                struct {
                        struct ct_sns_gid_pt_data entries[MAX_FIBRE_DEVICES];
                } gid_pt;

                struct {
                        uint8_t port_name[8];
                } gpn_id;

                struct {
                        uint8_t node_name[8];
                } gnn_id;

                struct {
                        uint8_t fc4_types[32];
                } gft_id;

                struct {
                        uint32_t entry_count;
                        uint8_t port_name[8];
                        struct ct_fdmi_hba_attributes attrs;
                } ghat;

                struct {
                        uint8_t port_name[8];
                } gfpn_id;

                struct {
                        uint16_t speeds;
                        uint16_t speed;
                } gpsc;
        } rsp;
};

struct ct_sns_pkt {
        union {
                struct ct_sns_req req;
                struct ct_sns_rsp rsp;
        } p;
};

/*
 * SNS command structures -- for 2200 compatability.
 */
#define RFT_ID_SNS_SCMD_LEN     22
#define RFT_ID_SNS_CMD_SIZE     60
#define RFT_ID_SNS_DATA_SIZE    16

#define RNN_ID_SNS_SCMD_LEN     10
#define RNN_ID_SNS_CMD_SIZE     36
#define RNN_ID_SNS_DATA_SIZE    16

#define GA_NXT_SNS_SCMD_LEN     6
#define GA_NXT_SNS_CMD_SIZE     28
#define GA_NXT_SNS_DATA_SIZE    (620 + 16)

#define GID_PT_SNS_SCMD_LEN     6
#define GID_PT_SNS_CMD_SIZE     28
#define GID_PT_SNS_DATA_SIZE    (MAX_FIBRE_DEVICES * 4 + 16)

#define GPN_ID_SNS_SCMD_LEN     6
#define GPN_ID_SNS_CMD_SIZE     28
#define GPN_ID_SNS_DATA_SIZE    (8 + 16)

#define GNN_ID_SNS_SCMD_LEN     6
#define GNN_ID_SNS_CMD_SIZE     28
#define GNN_ID_SNS_DATA_SIZE    (8 + 16)

struct sns_cmd_pkt {
        union {
                struct {
                        uint16_t buffer_length;
                        uint16_t reserved_1;
                        uint32_t buffer_address[2];
                        uint16_t subcommand_length;
                        uint16_t reserved_2;
                        uint16_t subcommand;
                        uint16_t size;
                        uint32_t reserved_3;
                        uint8_t param[36];
                } cmd;

                uint8_t rft_data[RFT_ID_SNS_DATA_SIZE];
                uint8_t rnn_data[RNN_ID_SNS_DATA_SIZE];
                uint8_t gan_data[GA_NXT_SNS_DATA_SIZE];
                uint8_t gid_data[GID_PT_SNS_DATA_SIZE];
                uint8_t gpn_data[GPN_ID_SNS_DATA_SIZE];
                uint8_t gnn_data[GNN_ID_SNS_DATA_SIZE];
        } p;
};

struct fw_blob {
        char *name;
        uint32_t segs[4];
        const struct firmware *fw;
};

/* Return data from MBC_GET_ID_LIST call. */
struct gid_list_info {
        uint8_t al_pa;
        uint8_t area;
        uint8_t domain;
        uint8_t loop_id_2100;   /* ISP2100/ISP2200 -- 4 bytes. */
        uint16_t loop_id;       /* ISP23XX         -- 6 bytes. */
        uint16_t reserved_1;    /* ISP24XX         -- 8 bytes. */
};
#define GID_LIST_SIZE (sizeof(struct gid_list_info) * MAX_FIBRE_DEVICES)

/* NPIV */
typedef struct vport_info {
        uint8_t         port_name[WWN_SIZE];
        uint8_t         node_name[WWN_SIZE];
        int             vp_id;
        uint16_t        loop_id;
        unsigned long   host_no;
        uint8_t         port_id[3];
        int             loop_state;
} vport_info_t;

typedef struct vport_params {
        uint8_t         port_name[WWN_SIZE];
        uint8_t         node_name[WWN_SIZE];
        uint32_t        options;
#define VP_OPTS_RETRY_ENABLE    BIT_0
#define VP_OPTS_VP_DISABLE      BIT_1
} vport_params_t;

/* NPIV - return codes of VP create and modify */
#define VP_RET_CODE_OK                  0
#define VP_RET_CODE_FATAL               1
#define VP_RET_CODE_WRONG_ID            2
#define VP_RET_CODE_WWPN                3
#define VP_RET_CODE_RESOURCES           4
#define VP_RET_CODE_NO_MEM              5
#define VP_RET_CODE_NOT_FOUND           6

struct qla_hw_data;

/*
 * ISP operations
 */
struct isp_operations {

        int (*pci_config) (struct scsi_qla_host *);
        void (*reset_chip) (struct scsi_qla_host *);
        int (*chip_diag) (struct scsi_qla_host *);
        void (*config_rings) (struct scsi_qla_host *);
        void (*reset_adapter) (struct scsi_qla_host *);
        int (*nvram_config) (struct scsi_qla_host *);
        void (*update_fw_options) (struct scsi_qla_host *);
        int (*load_risc) (struct scsi_qla_host *, uint32_t *);

        char * (*pci_info_str) (struct scsi_qla_host *, char *);
        char * (*fw_version_str) (struct scsi_qla_host *, char *);

        irq_handler_t intr_handler;
        void (*enable_intrs) (struct qla_hw_data *);
        void (*disable_intrs) (struct qla_hw_data *);

        int (*abort_command) (struct scsi_qla_host *, srb_t *,
                struct req_que *);
        int (*target_reset) (struct fc_port *, unsigned int);
        int (*lun_reset) (struct fc_port *, unsigned int);
        int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
                uint8_t, uint8_t, uint16_t *, uint8_t);
        int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
            uint8_t, uint8_t);

        uint16_t (*calc_req_entries) (uint16_t);
        void (*build_iocbs) (srb_t *, cmd_entry_t *, uint16_t);
        void * (*prep_ms_iocb) (struct scsi_qla_host *, uint32_t, uint32_t);
        void * (*prep_ms_fdmi_iocb) (struct scsi_qla_host *, uint32_t,
            uint32_t);

        uint8_t * (*read_nvram) (struct scsi_qla_host *, uint8_t *,
                uint32_t, uint32_t);
        int (*write_nvram) (struct scsi_qla_host *, uint8_t *, uint32_t,
                uint32_t);

        void (*fw_dump) (struct scsi_qla_host *, int);

        int (*beacon_on) (struct scsi_qla_host *);
        int (*beacon_off) (struct scsi_qla_host *);
        void (*beacon_blink) (struct scsi_qla_host *);

        uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *,
                uint32_t, uint32_t);
        int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t,
                uint32_t);

        int (*get_flash_version) (struct scsi_qla_host *, void *);
        int (*start_scsi) (srb_t *);
};

/* MSI-X Support *************************************************************/

#define QLA_MSIX_CHIP_REV_24XX  3
#define QLA_MSIX_FW_MODE(m)     (((m) & (BIT_7|BIT_8|BIT_9)) >> 7)
#define QLA_MSIX_FW_MODE_1(m)   (QLA_MSIX_FW_MODE(m) == 1)

#define QLA_MSIX_DEFAULT        0x00
#define QLA_MSIX_RSP_Q          0x01

#define QLA_MIDX_DEFAULT        0
#define QLA_MIDX_RSP_Q          1
#define QLA_PCI_MSIX_CONTROL    0xa2

struct scsi_qla_host;
struct rsp_que;

struct qla_msix_entry {
        int have_irq;
        uint32_t vector;
        uint16_t entry;
        struct rsp_que *rsp;
};

#define WATCH_INTERVAL          1       /* number of seconds */

/* Work events.  */
enum qla_work_type {
        QLA_EVT_AEN,
        QLA_EVT_IDC_ACK,
};


struct qla_work_evt {
        struct list_head        list;
        enum qla_work_type      type;
        u32                     flags;
#define QLA_EVT_FLAG_FREE       0x1

        union {
                struct {
                        enum fc_host_event_code code;
                        u32 data;
                } aen;
                struct {
#define QLA_IDC_ACK_REGS        7
                        uint16_t mb[QLA_IDC_ACK_REGS];
                } idc_ack;
        } u;
};

struct qla_chip_state_84xx {
        struct list_head list;
        struct kref kref;

        void *bus;
        spinlock_t access_lock;
        struct mutex fw_update_mutex;
        uint32_t fw_update;
        uint32_t op_fw_version;
        uint32_t op_fw_size;
        uint32_t op_fw_seq_size;
        uint32_t diag_fw_version;
        uint32_t gold_fw_version;
};

struct qla_statistics {
        uint32_t total_isp_aborts;
        uint64_t input_bytes;
        uint64_t output_bytes;
};

/* Multi queue support */
#define MBC_INITIALIZE_MULTIQ 0x1f
#define QLA_QUE_PAGE 0X1000
#define QLA_MQ_SIZE 32
#define QLA_MAX_HOST_QUES 16
#define QLA_MAX_QUEUES 256
#define ISP_QUE_REG(ha, id) \
        ((ha->mqenable) ? \
        ((void *)(ha->mqiobase) +\
        (QLA_QUE_PAGE * id)) :\
        ((void *)(ha->iobase)))
#define QLA_REQ_QUE_ID(tag) \
        ((tag < QLA_MAX_QUEUES && tag > 0) ? tag : 0)
#define QLA_DEFAULT_QUE_QOS 5
#define QLA_PRECONFIG_VPORTS 32
#define QLA_MAX_VPORTS_QLA24XX  128
#define QLA_MAX_VPORTS_QLA25XX  256
/* Response queue data structure */
struct rsp_que {
        dma_addr_t  dma;
        response_t *ring;
        response_t *ring_ptr;
        uint32_t __iomem *rsp_q_in;     /* FWI2-capable only. */
        uint32_t __iomem *rsp_q_out;
        uint16_t  ring_index;
        uint16_t  out_ptr;
        uint16_t  length;
        uint16_t  options;
        uint16_t  rid;
        uint16_t  id;
        uint16_t  vp_idx;
        struct qla_hw_data *hw;
        struct qla_msix_entry *msix;
        struct req_que *req;
};

/* Request queue data structure */
struct req_que {
        dma_addr_t  dma;
        request_t *ring;
        request_t *ring_ptr;
        uint32_t __iomem *req_q_in;     /* FWI2-capable only. */
        uint32_t __iomem *req_q_out;
        uint16_t  ring_index;
        uint16_t  in_ptr;
        uint16_t  cnt;
        uint16_t  length;
        uint16_t  options;
        uint16_t  rid;
        uint16_t  id;
        uint16_t  qos;
        uint16_t  vp_idx;
        struct rsp_que *rsp;
        srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
        uint32_t current_outstanding_cmd;
        int max_q_depth;
};

/*
 * Qlogic host adapter specific data structure.
*/
struct qla_hw_data {
        struct pci_dev  *pdev;
        /* SRB cache. */
#define SRB_MIN_REQ     128
        mempool_t       *srb_mempool;

        volatile struct {
                uint32_t        mbox_int                :1;
                uint32_t        mbox_busy               :1;

                uint32_t        disable_risc_code_load  :1;
                uint32_t        enable_64bit_addressing :1;
                uint32_t        enable_lip_reset        :1;
                uint32_t        enable_target_reset     :1;
                uint32_t        enable_lip_full_login   :1;
                uint32_t        enable_led_scheme       :1;
                uint32_t        inta_enabled            :1;
                uint32_t        msi_enabled             :1;
                uint32_t        msix_enabled            :1;
                uint32_t        disable_serdes          :1;
                uint32_t        gpsc_supported          :1;
                uint32_t        npiv_supported          :1;
                uint32_t        fce_enabled             :1;
                uint32_t        fac_supported           :1;
                uint32_t        chip_reset_done         :1;
        } flags;

        /* This spinlock is used to protect "io transactions", you must
        * acquire it before doing any IO to the card, eg with RD_REG*() and
        * WRT_REG*() for the duration of your entire commandtransaction.
        *
        * This spinlock is of lower priority than the io request lock.
        */

        spinlock_t      hardware_lock ____cacheline_aligned;
        int             bars;
        int             mem_only;
        device_reg_t __iomem *iobase;           /* Base I/O address */
        resource_size_t pio_address;

#define MIN_IOBASE_LEN          0x100
/* Multi queue data structs */
        device_reg_t __iomem *mqiobase;
        uint16_t        msix_count;
        uint8_t         mqenable;
        struct req_que **req_q_map;
        struct rsp_que **rsp_q_map;
        unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
        unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
        uint16_t        max_queues;
        struct qla_npiv_entry *npiv_info;
        uint16_t        nvram_npiv_size;

        uint16_t        switch_cap;
#define FLOGI_SEQ_DEL           BIT_8
#define FLOGI_MID_SUPPORT       BIT_10
#define FLOGI_VSAN_SUPPORT      BIT_12
#define FLOGI_SP_SUPPORT        BIT_13
        /* Timeout timers. */
        uint8_t         loop_down_abort_time;    /* port down timer */
        atomic_t        loop_down_timer;         /* loop down timer */
        uint8_t         link_down_timeout;       /* link down timeout */
        uint16_t        max_loop_id;

        uint16_t        fb_rev;
        uint16_t        min_external_loopid;    /* First external loop Id */

#define PORT_SPEED_UNKNOWN 0xFFFF
#define PORT_SPEED_1GB  0x00
#define PORT_SPEED_2GB  0x01
#define PORT_SPEED_4GB  0x03
#define PORT_SPEED_8GB  0x04
#define PORT_SPEED_10GB 0x13
        uint16_t        link_data_rate;         /* F/W operating speed */

        uint8_t         current_topology;
        uint8_t         prev_topology;
#define ISP_CFG_NL      1
#define ISP_CFG_N       2
#define ISP_CFG_FL      4
#define ISP_CFG_F       8

        uint8_t         operating_mode;         /* F/W operating mode */
#define LOOP      0
#define P2P       1
#define LOOP_P2P  2
#define P2P_LOOP  3
        uint8_t         interrupts_on;
        uint32_t        isp_abort_cnt;

#define PCI_DEVICE_ID_QLOGIC_ISP2532    0x2532
#define PCI_DEVICE_ID_QLOGIC_ISP8432    0x8432
#define PCI_DEVICE_ID_QLOGIC_ISP8001    0x8001
        uint32_t        device_type;
#define DT_ISP2100                      BIT_0
#define DT_ISP2200                      BIT_1
#define DT_ISP2300                      BIT_2
#define DT_ISP2312                      BIT_3
#define DT_ISP2322                      BIT_4
#define DT_ISP6312                      BIT_5
#define DT_ISP6322                      BIT_6
#define DT_ISP2422                      BIT_7
#define DT_ISP2432                      BIT_8
#define DT_ISP5422                      BIT_9
#define DT_ISP5432                      BIT_10
#define DT_ISP2532                      BIT_11
#define DT_ISP8432                      BIT_12
#define DT_ISP8001                      BIT_13
#define DT_ISP_LAST                     (DT_ISP8001 << 1)

#define DT_IIDMA                        BIT_26
#define DT_FWI2                         BIT_27
#define DT_ZIO_SUPPORTED                BIT_28
#define DT_OEM_001                      BIT_29
#define DT_ISP2200A                     BIT_30
#define DT_EXTENDED_IDS                 BIT_31
#define DT_MASK(ha)     ((ha)->device_type & (DT_ISP_LAST - 1))
#define IS_QLA2100(ha)  (DT_MASK(ha) & DT_ISP2100)
#define IS_QLA2200(ha)  (DT_MASK(ha) & DT_ISP2200)
#define IS_QLA2300(ha)  (DT_MASK(ha) & DT_ISP2300)
#define IS_QLA2312(ha)  (DT_MASK(ha) & DT_ISP2312)
#define IS_QLA2322(ha)  (DT_MASK(ha) & DT_ISP2322)
#define IS_QLA6312(ha)  (DT_MASK(ha) & DT_ISP6312)
#define IS_QLA6322(ha)  (DT_MASK(ha) & DT_ISP6322)
#define IS_QLA2422(ha)  (DT_MASK(ha) & DT_ISP2422)
#define IS_QLA2432(ha)  (DT_MASK(ha) & DT_ISP2432)
#define IS_QLA5422(ha)  (DT_MASK(ha) & DT_ISP5422)
#define IS_QLA5432(ha)  (DT_MASK(ha) & DT_ISP5432)
#define IS_QLA2532(ha)  (DT_MASK(ha) & DT_ISP2532)
#define IS_QLA8432(ha)  (DT_MASK(ha) & DT_ISP8432)
#define IS_QLA8001(ha)  (DT_MASK(ha) & DT_ISP8001)

#define IS_QLA23XX(ha)  (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
                        IS_QLA6312(ha) || IS_QLA6322(ha))
#define IS_QLA24XX(ha)  (IS_QLA2422(ha) || IS_QLA2432(ha))
#define IS_QLA54XX(ha)  (IS_QLA5422(ha) || IS_QLA5432(ha))
#define IS_QLA25XX(ha)  (IS_QLA2532(ha))
#define IS_QLA84XX(ha)  (IS_QLA8432(ha))
#define IS_QLA24XX_TYPE(ha)     (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \
                                IS_QLA84XX(ha))
#define IS_QLA81XX(ha)          (IS_QLA8001(ha))
#define IS_QLA2XXX_MIDTYPE(ha)  (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \
                                IS_QLA25XX(ha) || IS_QLA81XX(ha))
#define IS_NOPOLLING_TYPE(ha)   ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \
                                (ha)->flags.msix_enabled)
#define IS_FAC_REQUIRED(ha)     (IS_QLA81XX(ha))
#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha))

#define IS_IIDMA_CAPABLE(ha)    ((ha)->device_type & DT_IIDMA)
#define IS_FWI2_CAPABLE(ha)     ((ha)->device_type & DT_FWI2)
#define IS_ZIO_SUPPORTED(ha)    ((ha)->device_type & DT_ZIO_SUPPORTED)
#define IS_OEM_001(ha)          ((ha)->device_type & DT_OEM_001)
#define HAS_EXTENDED_IDS(ha)    ((ha)->device_type & DT_EXTENDED_IDS)

        /* HBA serial number */
        uint8_t         serial0;
        uint8_t         serial1;
        uint8_t         serial2;

        /* NVRAM configuration data */
#define MAX_NVRAM_SIZE  4096
#define VPD_OFFSET      MAX_NVRAM_SIZE / 2
        uint16_t        nvram_size;
        uint16_t        nvram_base;
        void            *nvram;
        uint16_t        vpd_size;
        uint16_t        vpd_base;
        void            *vpd;

        uint16_t        loop_reset_delay;
        uint8_t         retry_count;
        uint8_t         login_timeout;
        uint16_t        r_a_tov;
        int             port_down_retry_count;
        uint8_t         mbx_count;

        uint32_t        login_retry_count;
        /* SNS command interfaces. */
        ms_iocb_entry_t         *ms_iocb;
        dma_addr_t              ms_iocb_dma;
        struct ct_sns_pkt       *ct_sns;
        dma_addr_t              ct_sns_dma;
        /* SNS command interfaces for 2200. */
        struct sns_cmd_pkt      *sns_cmd;
        dma_addr_t              sns_cmd_dma;

#define SFP_DEV_SIZE    256
#define SFP_BLOCK_SIZE  64
        void            *sfp_data;
        dma_addr_t      sfp_data_dma;

        uint8_t         *edc_data;
        dma_addr_t      edc_data_dma;
        uint16_t        edc_data_len;

        struct task_struct      *dpc_thread;
        uint8_t dpc_active;                  /* DPC routine is active */

        dma_addr_t      gid_list_dma;
        struct gid_list_info *gid_list;
        int             gid_list_info_size;

        /* Small DMA pool allocations -- maximum 256 bytes in length. */
#define DMA_POOL_SIZE   256
        struct dma_pool *s_dma_pool;

        dma_addr_t      init_cb_dma;
        init_cb_t       *init_cb;
        int             init_cb_size;
        dma_addr_t      ex_init_cb_dma;
        struct ex_init_cb_81xx *ex_init_cb;

        /* These are used by mailbox operations. */
        volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT];

        mbx_cmd_t       *mcp;
        unsigned long   mbx_cmd_flags;
#define MBX_INTERRUPT           1
#define MBX_INTR_WAIT           2
#define MBX_UPDATE_FLASH_ACTIVE 3

        struct mutex vport_lock;        /* Virtual port synchronization */
        struct completion mbx_cmd_comp; /* Serialize mbx access */
        struct completion mbx_intr_comp;  /* Used for completion notification */

        /* Basic firmware related information. */
        uint16_t        fw_major_version;
        uint16_t        fw_minor_version;
        uint16_t        fw_subminor_version;
        uint16_t        fw_attributes;
        uint32_t        fw_memory_size;
        uint32_t        fw_transfer_size;
        uint32_t        fw_srisc_address;
#define RISC_START_ADDRESS_2100 0x1000
#define RISC_START_ADDRESS_2300 0x800
#define RISC_START_ADDRESS_2400 0x100000
        uint16_t        fw_xcb_count;

        uint16_t        fw_options[16];         /* slots: 1,2,3,10,11 */
        uint8_t         fw_seriallink_options[4];
        uint16_t        fw_seriallink_options24[4];

        uint8_t         mpi_version[3];
        uint32_t        mpi_capabilities;
        uint8_t         phy_version[3];

        /* Firmware dump information. */
        struct qla2xxx_fw_dump *fw_dump;
        uint32_t        fw_dump_len;
        int             fw_dumped;
        int             fw_dump_reading;
        dma_addr_t      eft_dma;
        void            *eft;

        uint32_t        chain_offset;
        struct dentry *dfs_dir;
        struct dentry *dfs_fce;
        dma_addr_t      fce_dma;
        void            *fce;
        uint32_t        fce_bufs;
        uint16_t        fce_mb[8];
        uint64_t        fce_wr, fce_rd;
        struct mutex    fce_mutex;

        uint32_t        pci_attr;
        uint16_t        chip_revision;

        uint16_t        product_id[4];

        uint8_t         model_number[16+1];
#define BINZERO         "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"
        char            model_desc[80];
        uint8_t         adapter_id[16+1];

        /* Option ROM information. */
        char            *optrom_buffer;
        uint32_t        optrom_size;
        int             optrom_state;
#define QLA_SWAITING    0
#define QLA_SREADING    1
#define QLA_SWRITING    2
        uint32_t        optrom_region_start;
        uint32_t        optrom_region_size;

/* PCI expansion ROM image information. */
#define ROM_CODE_TYPE_BIOS      0
#define ROM_CODE_TYPE_FCODE     1
#define ROM_CODE_TYPE_EFI       3
        uint8_t         bios_revision[2];
        uint8_t         efi_revision[2];
        uint8_t         fcode_revision[16];
        uint32_t        fw_revision[4];

        /* Offsets for flash/nvram access (set to ~0 if not used). */
        uint32_t        flash_conf_off;
        uint32_t        flash_data_off;
        uint32_t        nvram_conf_off;
        uint32_t        nvram_data_off;

        uint32_t        fdt_wrt_disable;
        uint32_t        fdt_erase_cmd;
        uint32_t        fdt_block_size;
        uint32_t        fdt_unprotect_sec_cmd;
        uint32_t        fdt_protect_sec_cmd;

        uint32_t        flt_region_flt;
        uint32_t        flt_region_fdt;
        uint32_t        flt_region_boot;
        uint32_t        flt_region_fw;
        uint32_t        flt_region_vpd_nvram;
        uint32_t        flt_region_vpd;
        uint32_t        flt_region_nvram;
        uint32_t        flt_region_npiv_conf;

        /* Needed for BEACON */
        uint16_t        beacon_blink_led;
        uint8_t         beacon_color_state;
#define QLA_LED_GRN_ON          0x01
#define QLA_LED_YLW_ON          0x02
#define QLA_LED_ABR_ON          0x04
#define QLA_LED_ALL_ON          0x07    /* yellow, green, amber. */
                                        /* ISP2322: red, green, amber. */
        uint16_t        zio_mode;
        uint16_t        zio_timer;
        struct fc_host_statistics fc_host_stat;

        struct qla_msix_entry *msix_entries;

        struct list_head        vp_list;        /* list of VP */
        unsigned long   vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) /
                        sizeof(unsigned long)];
        uint16_t        num_vhosts;     /* number of vports created */
        uint16_t        num_vsans;      /* number of vsan created */
        uint16_t        max_npiv_vports;        /* 63 or 125 per topoloty */
        int             cur_vport_count;

        struct qla_chip_state_84xx *cs84xx;
        struct qla_statistics qla_stats;
        struct isp_operations *isp_ops;
};

/*
 * Qlogic scsi host structure
 */
typedef struct scsi_qla_host {
        struct list_head list;
        struct list_head vp_fcports;    /* list of fcports */
        struct list_head work_list;
        /* Commonly used flags and state information. */
        struct Scsi_Host *host;
        unsigned long   host_no;
        uint8_t         host_str[16];

        volatile struct {
                uint32_t        init_done               :1;
                uint32_t        online                  :1;
                uint32_t        rscn_queue_overflow     :1;
                uint32_t        reset_active            :1;

                uint32_t        management_server_logged_in :1;
                uint32_t        process_response_queue  :1;
        } flags;

        atomic_t        loop_state;
#define LOOP_TIMEOUT    1
#define LOOP_DOWN       2
#define LOOP_UP         3
#define LOOP_UPDATE     4
#define LOOP_READY      5
#define LOOP_DEAD       6

        unsigned long   dpc_flags;
#define RESET_MARKER_NEEDED     0       /* Send marker to ISP. */
#define RESET_ACTIVE            1
#define ISP_ABORT_NEEDED        2       /* Initiate ISP abort. */
#define ABORT_ISP_ACTIVE        3       /* ISP abort in progress. */
#define LOOP_RESYNC_NEEDED      4       /* Device Resync needed. */
#define LOOP_RESYNC_ACTIVE      5
#define LOCAL_LOOP_UPDATE       6       /* Perform a local loop update. */
#define RSCN_UPDATE             7       /* Perform an RSCN update. */
#define RELOGIN_NEEDED          8
#define REGISTER_FC4_NEEDED     9       /* SNS FC4 registration required. */
#define ISP_ABORT_RETRY         10      /* ISP aborted. */
#define BEACON_BLINK_NEEDED     11
#define REGISTER_FDMI_NEEDED    12
#define FCPORT_UPDATE_NEEDED    13
#define VP_DPC_NEEDED           14      /* wake up for VP dpc handling */
#define UNLOADING               15
#define NPIV_CONFIG_NEEDED      16

        uint32_t        device_flags;
#define SWITCH_FOUND            BIT_0
#define DFLG_NO_CABLE           BIT_1

        srb_t           *status_srb;    /* Status continuation entry. */

        /* ISP configuration data. */
        uint16_t        loop_id;                /* Host adapter loop id */

        port_id_t       d_id;                   /* Host adapter port id */
        uint8_t         marker_needed;
        uint16_t        mgmt_svr_loop_id;



        /* RSCN queue. */
        uint32_t rscn_queue[MAX_RSCN_COUNT];
        uint8_t rscn_in_ptr;
        uint8_t rscn_out_ptr;

        /* Timeout timers. */
        uint8_t         loop_down_abort_time;    /* port down timer */
        atomic_t        loop_down_timer;         /* loop down timer */
        uint8_t         link_down_timeout;       /* link down timeout */

        uint32_t        timer_active;
        struct timer_list        timer;

        uint8_t         node_name[WWN_SIZE];
        uint8_t         port_name[WWN_SIZE];
        uint8_t         fabric_node_name[WWN_SIZE];
        uint32_t        vp_abort_cnt;

        struct fc_vport *fc_vport;      /* holds fc_vport * for each vport */
        uint16_t        vp_idx;         /* vport ID */

        unsigned long           vp_flags;
#define VP_IDX_ACQUIRED         0       /* bit no 0 */
#define VP_CREATE_NEEDED        1
#define VP_BIND_NEEDED          2
#define VP_DELETE_NEEDED        3
#define VP_SCR_NEEDED           4       /* State Change Request registration */
        atomic_t                vp_state;
#define VP_OFFLINE              0
#define VP_ACTIVE               1
#define VP_FAILED               2
// #define VP_DISABLE           3
        uint16_t        vp_err_state;
        uint16_t        vp_prev_err_state;
#define VP_ERR_UNKWN            0
#define VP_ERR_PORTDWN          1
#define VP_ERR_FAB_UNSUPPORTED  2
#define VP_ERR_FAB_NORESOURCES  3
#define VP_ERR_FAB_LOGOUT       4
#define VP_ERR_ADAP_NORESOURCES 5
        struct qla_hw_data *hw;
        int     req_ques[QLA_MAX_HOST_QUES];
} scsi_qla_host_t;

/*
 * Macros to help code, maintain, etc.
 */
#define LOOP_TRANSITION(ha) \
        (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
         test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
         atomic_read(&ha->loop_state) == LOOP_DOWN)

#define qla_printk(level, ha, format, arg...) \
        dev_printk(level , &((ha)->pdev->dev) , format , ## arg)

/*
 * qla2x00 local function return status codes
 */
#define MBS_MASK                0x3fff

#define QLA_SUCCESS             (MBS_COMMAND_COMPLETE & MBS_MASK)
#define QLA_INVALID_COMMAND     (MBS_INVALID_COMMAND & MBS_MASK)
#define QLA_INTERFACE_ERROR     (MBS_HOST_INTERFACE_ERROR & MBS_MASK)
#define QLA_TEST_FAILED         (MBS_TEST_FAILED & MBS_MASK)
#define QLA_COMMAND_ERROR       (MBS_COMMAND_ERROR & MBS_MASK)
#define QLA_PARAMETER_ERROR     (MBS_COMMAND_PARAMETER_ERROR & MBS_MASK)
#define QLA_PORT_ID_USED        (MBS_PORT_ID_USED & MBS_MASK)
#define QLA_LOOP_ID_USED        (MBS_LOOP_ID_USED & MBS_MASK)
#define QLA_ALL_IDS_IN_USE      (MBS_ALL_IDS_IN_USE & MBS_MASK)
#define QLA_NOT_LOGGED_IN       (MBS_NOT_LOGGED_IN & MBS_MASK)

#define QLA_FUNCTION_TIMEOUT            0x100
#define QLA_FUNCTION_PARAMETER_ERROR    0x101
#define QLA_FUNCTION_FAILED             0x102
#define QLA_MEMORY_ALLOC_FAILED         0x103
#define QLA_LOCK_TIMEOUT                0x104
#define QLA_ABORTED                     0x105
#define QLA_SUSPENDED                   0x106
#define QLA_BUSY                        0x107
#define QLA_RSCNS_HANDLED               0x108
#define QLA_ALREADY_REGISTERED          0x109

#define NVRAM_DELAY()           udelay(10)

#define INVALID_HANDLE  (MAX_OUTSTANDING_COMMANDS+1)

/*
 * Flash support definitions
 */
#define OPTROM_SIZE_2300        0x20000
#define OPTROM_SIZE_2322        0x100000
#define OPTROM_SIZE_24XX        0x100000
#define OPTROM_SIZE_25XX        0x200000
#define OPTROM_SIZE_81XX        0x400000

#include "qla_gbl.h"
#include "qla_dbg.h"
#include "qla_inline.h"

#define CMD_SP(Cmnd)            ((Cmnd)->SCp.ptr)

#endif