linux/drivers/net/yellowfin.c
<<
>>
Prefs
   1/* yellowfin.c: A Packet Engines G-NIC ethernet driver for linux. */
   2/*
   3        Written 1997-2001 by Donald Becker.
   4
   5        This software may be used and distributed according to the terms of
   6        the GNU General Public License (GPL), incorporated herein by reference.
   7        Drivers based on or derived from this code fall under the GPL and must
   8        retain the authorship, copyright and license notice.  This file is not
   9        a complete program and may only be used when the entire operating
  10        system is licensed under the GPL.
  11
  12        This driver is for the Packet Engines G-NIC PCI Gigabit Ethernet adapter.
  13        It also supports the Symbios Logic version of the same chip core.
  14
  15        The author may be reached as becker@scyld.com, or C/O
  16        Scyld Computing Corporation
  17        410 Severn Ave., Suite 210
  18        Annapolis MD 21403
  19
  20        Support and updates available at
  21        http://www.scyld.com/network/yellowfin.html
  22        [link no longer provides useful info -jgarzik]
  23
  24*/
  25
  26#define DRV_NAME        "yellowfin"
  27#define DRV_VERSION     "2.1"
  28#define DRV_RELDATE     "Sep 11, 2006"
  29
  30#define PFX DRV_NAME ": "
  31
  32/* The user-configurable values.
  33   These may be modified when a driver module is loaded.*/
  34
  35static int debug = 1;                   /* 1 normal messages, 0 quiet .. 7 verbose. */
  36/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
  37static int max_interrupt_work = 20;
  38static int mtu;
  39#ifdef YF_PROTOTYPE                     /* Support for prototype hardware errata. */
  40/* System-wide count of bogus-rx frames. */
  41static int bogus_rx;
  42static int dma_ctrl = 0x004A0263;                       /* Constrained by errata */
  43static int fifo_cfg = 0x0020;                           /* Bypass external Tx FIFO. */
  44#elif defined(YF_NEW)                                   /* A future perfect board :->.  */
  45static int dma_ctrl = 0x00CAC277;                       /* Override when loading module! */
  46static int fifo_cfg = 0x0028;
  47#else
  48static const int dma_ctrl = 0x004A0263;                         /* Constrained by errata */
  49static const int fifo_cfg = 0x0020;                             /* Bypass external Tx FIFO. */
  50#endif
  51
  52/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
  53   Setting to > 1514 effectively disables this feature. */
  54static int rx_copybreak;
  55
  56/* Used to pass the media type, etc.
  57   No media types are currently defined.  These exist for driver
  58   interoperability.
  59*/
  60#define MAX_UNITS 8                             /* More are supported, limit only on options */
  61static int options[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
  62static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
  63
  64/* Do ugly workaround for GX server chipset errata. */
  65static int gx_fix;
  66
  67/* Operational parameters that are set at compile time. */
  68
  69/* Keep the ring sizes a power of two for efficiency.
  70   Making the Tx ring too long decreases the effectiveness of channel
  71   bonding and packet priority.
  72   There are no ill effects from too-large receive rings. */
  73#define TX_RING_SIZE    16
  74#define TX_QUEUE_SIZE   12              /* Must be > 4 && <= TX_RING_SIZE */
  75#define RX_RING_SIZE    64
  76#define STATUS_TOTAL_SIZE       TX_RING_SIZE*sizeof(struct tx_status_words)
  77#define TX_TOTAL_SIZE           2*TX_RING_SIZE*sizeof(struct yellowfin_desc)
  78#define RX_TOTAL_SIZE           RX_RING_SIZE*sizeof(struct yellowfin_desc)
  79
  80/* Operational parameters that usually are not changed. */
  81/* Time in jiffies before concluding the transmitter is hung. */
  82#define TX_TIMEOUT  (2*HZ)
  83#define PKT_BUF_SZ              1536                    /* Size of each temporary Rx buffer.*/
  84
  85#define yellowfin_debug debug
  86
  87#include <linux/module.h>
  88#include <linux/kernel.h>
  89#include <linux/string.h>
  90#include <linux/timer.h>
  91#include <linux/errno.h>
  92#include <linux/ioport.h>
  93#include <linux/slab.h>
  94#include <linux/interrupt.h>
  95#include <linux/pci.h>
  96#include <linux/init.h>
  97#include <linux/mii.h>
  98#include <linux/netdevice.h>
  99#include <linux/etherdevice.h>
 100#include <linux/skbuff.h>
 101#include <linux/ethtool.h>
 102#include <linux/crc32.h>
 103#include <linux/bitops.h>
 104#include <asm/uaccess.h>
 105#include <asm/processor.h>              /* Processor type for cache alignment. */
 106#include <asm/unaligned.h>
 107#include <asm/io.h>
 108
 109/* These identify the driver base version and may not be removed. */
 110static char version[] __devinitdata =
 111KERN_INFO DRV_NAME ".c:v1.05  1/09/2001  Written by Donald Becker <becker@scyld.com>\n"
 112KERN_INFO "  (unofficial 2.4.x port, " DRV_VERSION ", " DRV_RELDATE ")\n";
 113
 114MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
 115MODULE_DESCRIPTION("Packet Engines Yellowfin G-NIC Gigabit Ethernet driver");
 116MODULE_LICENSE("GPL");
 117
 118module_param(max_interrupt_work, int, 0);
 119module_param(mtu, int, 0);
 120module_param(debug, int, 0);
 121module_param(rx_copybreak, int, 0);
 122module_param_array(options, int, NULL, 0);
 123module_param_array(full_duplex, int, NULL, 0);
 124module_param(gx_fix, int, 0);
 125MODULE_PARM_DESC(max_interrupt_work, "G-NIC maximum events handled per interrupt");
 126MODULE_PARM_DESC(mtu, "G-NIC MTU (all boards)");
 127MODULE_PARM_DESC(debug, "G-NIC debug level (0-7)");
 128MODULE_PARM_DESC(rx_copybreak, "G-NIC copy breakpoint for copy-only-tiny-frames");
 129MODULE_PARM_DESC(options, "G-NIC: Bits 0-3: media type, bit 17: full duplex");
 130MODULE_PARM_DESC(full_duplex, "G-NIC full duplex setting(s) (1)");
 131MODULE_PARM_DESC(gx_fix, "G-NIC: enable GX server chipset bug workaround (0-1)");
 132
 133/*
 134                                Theory of Operation
 135
 136I. Board Compatibility
 137
 138This device driver is designed for the Packet Engines "Yellowfin" Gigabit
 139Ethernet adapter.  The G-NIC 64-bit PCI card is supported, as well as the
 140Symbios 53C885E dual function chip.
 141
 142II. Board-specific settings
 143
 144PCI bus devices are configured by the system at boot time, so no jumpers
 145need to be set on the board.  The system BIOS preferably should assign the
 146PCI INTA signal to an otherwise unused system IRQ line.
 147Note: Kernel versions earlier than 1.3.73 do not support shared PCI
 148interrupt lines.
 149
 150III. Driver operation
 151
 152IIIa. Ring buffers
 153
 154The Yellowfin uses the Descriptor Based DMA Architecture specified by Apple.
 155This is a descriptor list scheme similar to that used by the EEPro100 and
 156Tulip.  This driver uses two statically allocated fixed-size descriptor lists
 157formed into rings by a branch from the final descriptor to the beginning of
 158the list.  The ring sizes are set at compile time by RX/TX_RING_SIZE.
 159
 160The driver allocates full frame size skbuffs for the Rx ring buffers at
 161open() time and passes the skb->data field to the Yellowfin as receive data
 162buffers.  When an incoming frame is less than RX_COPYBREAK bytes long,
 163a fresh skbuff is allocated and the frame is copied to the new skbuff.
 164When the incoming frame is larger, the skbuff is passed directly up the
 165protocol stack and replaced by a newly allocated skbuff.
 166
 167The RX_COPYBREAK value is chosen to trade-off the memory wasted by
 168using a full-sized skbuff for small frames vs. the copying costs of larger
 169frames.  For small frames the copying cost is negligible (esp. considering
 170that we are pre-loading the cache with immediately useful header
 171information).  For large frames the copying cost is non-trivial, and the
 172larger copy might flush the cache of useful data.
 173
 174IIIC. Synchronization
 175
 176The driver runs as two independent, single-threaded flows of control.  One
 177is the send-packet routine, which enforces single-threaded use by the
 178dev->tbusy flag.  The other thread is the interrupt handler, which is single
 179threaded by the hardware and other software.
 180
 181The send packet thread has partial control over the Tx ring and 'dev->tbusy'
 182flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
 183queue slot is empty, it clears the tbusy flag when finished otherwise it sets
 184the 'yp->tx_full' flag.
 185
 186The interrupt handler has exclusive control over the Rx ring and records stats
 187from the Tx ring.  After reaping the stats, it marks the Tx queue entry as
 188empty by incrementing the dirty_tx mark. Iff the 'yp->tx_full' flag is set, it
 189clears both the tx_full and tbusy flags.
 190
 191IV. Notes
 192
 193Thanks to Kim Stearns of Packet Engines for providing a pair of G-NIC boards.
 194Thanks to Bruce Faust of Digitalscape for providing both their SYM53C885 board
 195and an AlphaStation to verifty the Alpha port!
 196
 197IVb. References
 198
 199Yellowfin Engineering Design Specification, 4/23/97 Preliminary/Confidential
 200Symbios SYM53C885 PCI-SCSI/Fast Ethernet Multifunction Controller Preliminary
 201   Data Manual v3.0
 202http://cesdis.gsfc.nasa.gov/linux/misc/NWay.html
 203http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html
 204
 205IVc. Errata
 206
 207See Packet Engines confidential appendix (prototype chips only).
 208*/
 209
 210
 211
 212enum capability_flags {
 213        HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
 214        HasMACAddrBug=32, /* Only on early revs.  */
 215        DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */
 216};
 217
 218/* The PCI I/O space extent. */
 219enum {
 220        YELLOWFIN_SIZE  = 0x100,
 221};
 222
 223struct pci_id_info {
 224        const char *name;
 225        struct match_info {
 226                int     pci, pci_mask, subsystem, subsystem_mask;
 227                int revision, revision_mask;                            /* Only 8 bits. */
 228        } id;
 229        int drv_flags;                          /* Driver use, intended as capability flags. */
 230};
 231
 232static const struct pci_id_info pci_id_tbl[] = {
 233        {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
 234         FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
 235        {"Symbios SYM83C885", { 0x07011000, 0xffffffff},
 236          HasMII | DontUseEeprom },
 237        { }
 238};
 239
 240static const struct pci_device_id yellowfin_pci_tbl[] = {
 241        { 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 242        { 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
 243        { }
 244};
 245MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);
 246
 247
 248/* Offsets to the Yellowfin registers.  Various sizes and alignments. */
 249enum yellowfin_offsets {
 250        TxCtrl=0x00, TxStatus=0x04, TxPtr=0x0C,
 251        TxIntrSel=0x10, TxBranchSel=0x14, TxWaitSel=0x18,
 252        RxCtrl=0x40, RxStatus=0x44, RxPtr=0x4C,
 253        RxIntrSel=0x50, RxBranchSel=0x54, RxWaitSel=0x58,
 254        EventStatus=0x80, IntrEnb=0x82, IntrClear=0x84, IntrStatus=0x86,
 255        ChipRev=0x8C, DMACtrl=0x90, TxThreshold=0x94,
 256        Cnfg=0xA0, FrameGap0=0xA2, FrameGap1=0xA4,
 257        MII_Cmd=0xA6, MII_Addr=0xA8, MII_Wr_Data=0xAA, MII_Rd_Data=0xAC,
 258        MII_Status=0xAE,
 259        RxDepth=0xB8, FlowCtrl=0xBC,
 260        AddrMode=0xD0, StnAddr=0xD2, HashTbl=0xD8, FIFOcfg=0xF8,
 261        EEStatus=0xF0, EECtrl=0xF1, EEAddr=0xF2, EERead=0xF3, EEWrite=0xF4,
 262        EEFeature=0xF5,
 263};
 264
 265/* The Yellowfin Rx and Tx buffer descriptors.
 266   Elements are written as 32 bit for endian portability. */
 267struct yellowfin_desc {
 268        __le32 dbdma_cmd;
 269        __le32 addr;
 270        __le32 branch_addr;
 271        __le32 result_status;
 272};
 273
 274struct tx_status_words {
 275#ifdef __BIG_ENDIAN
 276        u16 tx_errs;
 277        u16 tx_cnt;
 278        u16 paused;
 279        u16 total_tx_cnt;
 280#else  /* Little endian chips. */
 281        u16 tx_cnt;
 282        u16 tx_errs;
 283        u16 total_tx_cnt;
 284        u16 paused;
 285#endif /* __BIG_ENDIAN */
 286};
 287
 288/* Bits in yellowfin_desc.cmd */
 289enum desc_cmd_bits {
 290        CMD_TX_PKT=0x10000000, CMD_RX_BUF=0x20000000, CMD_TXSTATUS=0x30000000,
 291        CMD_NOP=0x60000000, CMD_STOP=0x70000000,
 292        BRANCH_ALWAYS=0x0C0000, INTR_ALWAYS=0x300000, WAIT_ALWAYS=0x030000,
 293        BRANCH_IFTRUE=0x040000,
 294};
 295
 296/* Bits in yellowfin_desc.status */
 297enum desc_status_bits { RX_EOP=0x0040, };
 298
 299/* Bits in the interrupt status/mask registers. */
 300enum intr_status_bits {
 301        IntrRxDone=0x01, IntrRxInvalid=0x02, IntrRxPCIFault=0x04,IntrRxPCIErr=0x08,
 302        IntrTxDone=0x10, IntrTxInvalid=0x20, IntrTxPCIFault=0x40,IntrTxPCIErr=0x80,
 303        IntrEarlyRx=0x100, IntrWakeup=0x200, };
 304
 305#define PRIV_ALIGN      31      /* Required alignment mask */
 306#define MII_CNT         4
 307struct yellowfin_private {
 308        /* Descriptor rings first for alignment.
 309           Tx requires a second descriptor for status. */
 310        struct yellowfin_desc *rx_ring;
 311        struct yellowfin_desc *tx_ring;
 312        struct sk_buff* rx_skbuff[RX_RING_SIZE];
 313        struct sk_buff* tx_skbuff[TX_RING_SIZE];
 314        dma_addr_t rx_ring_dma;
 315        dma_addr_t tx_ring_dma;
 316
 317        struct tx_status_words *tx_status;
 318        dma_addr_t tx_status_dma;
 319
 320        struct timer_list timer;        /* Media selection timer. */
 321        /* Frequently used and paired value: keep adjacent for cache effect. */
 322        int chip_id, drv_flags;
 323        struct pci_dev *pci_dev;
 324        unsigned int cur_rx, dirty_rx;          /* Producer/consumer ring indices */
 325        unsigned int rx_buf_sz;                         /* Based on MTU+slack. */
 326        struct tx_status_words *tx_tail_desc;
 327        unsigned int cur_tx, dirty_tx;
 328        int tx_threshold;
 329        unsigned int tx_full:1;                         /* The Tx queue is full. */
 330        unsigned int full_duplex:1;                     /* Full-duplex operation requested. */
 331        unsigned int duplex_lock:1;
 332        unsigned int medialock:1;                       /* Do not sense media. */
 333        unsigned int default_port:4;            /* Last dev->if_port value. */
 334        /* MII transceiver section. */
 335        int mii_cnt;                                            /* MII device addresses. */
 336        u16 advertising;                                        /* NWay media advertisement */
 337        unsigned char phys[MII_CNT];            /* MII device addresses, only first one used */
 338        spinlock_t lock;
 339        void __iomem *base;
 340};
 341
 342static int read_eeprom(void __iomem *ioaddr, int location);
 343static int mdio_read(void __iomem *ioaddr, int phy_id, int location);
 344static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value);
 345static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 346static int yellowfin_open(struct net_device *dev);
 347static void yellowfin_timer(unsigned long data);
 348static void yellowfin_tx_timeout(struct net_device *dev);
 349static void yellowfin_init_ring(struct net_device *dev);
 350static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev);
 351static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance);
 352static int yellowfin_rx(struct net_device *dev);
 353static void yellowfin_error(struct net_device *dev, int intr_status);
 354static int yellowfin_close(struct net_device *dev);
 355static void set_rx_mode(struct net_device *dev);
 356static const struct ethtool_ops ethtool_ops;
 357
 358static const struct net_device_ops netdev_ops = {
 359        .ndo_open               = yellowfin_open,
 360        .ndo_stop               = yellowfin_close,
 361        .ndo_start_xmit         = yellowfin_start_xmit,
 362        .ndo_set_multicast_list = set_rx_mode,
 363        .ndo_change_mtu         = eth_change_mtu,
 364        .ndo_validate_addr      = eth_validate_addr,
 365        .ndo_set_mac_address    = eth_mac_addr,
 366        .ndo_do_ioctl           = netdev_ioctl,
 367        .ndo_tx_timeout         = yellowfin_tx_timeout,
 368};
 369
 370static int __devinit yellowfin_init_one(struct pci_dev *pdev,
 371                                        const struct pci_device_id *ent)
 372{
 373        struct net_device *dev;
 374        struct yellowfin_private *np;
 375        int irq;
 376        int chip_idx = ent->driver_data;
 377        static int find_cnt;
 378        void __iomem *ioaddr;
 379        int i, option = find_cnt < MAX_UNITS ? options[find_cnt] : 0;
 380        int drv_flags = pci_id_tbl[chip_idx].drv_flags;
 381        void *ring_space;
 382        dma_addr_t ring_dma;
 383#ifdef USE_IO_OPS
 384        int bar = 0;
 385#else
 386        int bar = 1;
 387#endif
 388
 389/* when built into the kernel, we only print version if device is found */
 390#ifndef MODULE
 391        static int printed_version;
 392        if (!printed_version++)
 393                printk(version);
 394#endif
 395
 396        i = pci_enable_device(pdev);
 397        if (i) return i;
 398
 399        dev = alloc_etherdev(sizeof(*np));
 400        if (!dev) {
 401                printk (KERN_ERR PFX "cannot allocate ethernet device\n");
 402                return -ENOMEM;
 403        }
 404        SET_NETDEV_DEV(dev, &pdev->dev);
 405
 406        np = netdev_priv(dev);
 407
 408        if (pci_request_regions(pdev, DRV_NAME))
 409                goto err_out_free_netdev;
 410
 411        pci_set_master (pdev);
 412
 413        ioaddr = pci_iomap(pdev, bar, YELLOWFIN_SIZE);
 414        if (!ioaddr)
 415                goto err_out_free_res;
 416
 417        irq = pdev->irq;
 418
 419        if (drv_flags & DontUseEeprom)
 420                for (i = 0; i < 6; i++)
 421                        dev->dev_addr[i] = ioread8(ioaddr + StnAddr + i);
 422        else {
 423                int ee_offset = (read_eeprom(ioaddr, 6) == 0xff ? 0x100 : 0);
 424                for (i = 0; i < 6; i++)
 425                        dev->dev_addr[i] = read_eeprom(ioaddr, ee_offset + i);
 426        }
 427
 428        /* Reset the chip. */
 429        iowrite32(0x80000000, ioaddr + DMACtrl);
 430
 431        dev->base_addr = (unsigned long)ioaddr;
 432        dev->irq = irq;
 433
 434        pci_set_drvdata(pdev, dev);
 435        spin_lock_init(&np->lock);
 436
 437        np->pci_dev = pdev;
 438        np->chip_id = chip_idx;
 439        np->drv_flags = drv_flags;
 440        np->base = ioaddr;
 441
 442        ring_space = pci_alloc_consistent(pdev, TX_TOTAL_SIZE, &ring_dma);
 443        if (!ring_space)
 444                goto err_out_cleardev;
 445        np->tx_ring = (struct yellowfin_desc *)ring_space;
 446        np->tx_ring_dma = ring_dma;
 447
 448        ring_space = pci_alloc_consistent(pdev, RX_TOTAL_SIZE, &ring_dma);
 449        if (!ring_space)
 450                goto err_out_unmap_tx;
 451        np->rx_ring = (struct yellowfin_desc *)ring_space;
 452        np->rx_ring_dma = ring_dma;
 453
 454        ring_space = pci_alloc_consistent(pdev, STATUS_TOTAL_SIZE, &ring_dma);
 455        if (!ring_space)
 456                goto err_out_unmap_rx;
 457        np->tx_status = (struct tx_status_words *)ring_space;
 458        np->tx_status_dma = ring_dma;
 459
 460        if (dev->mem_start)
 461                option = dev->mem_start;
 462
 463        /* The lower four bits are the media type. */
 464        if (option > 0) {
 465                if (option & 0x200)
 466                        np->full_duplex = 1;
 467                np->default_port = option & 15;
 468                if (np->default_port)
 469                        np->medialock = 1;
 470        }
 471        if (find_cnt < MAX_UNITS  &&  full_duplex[find_cnt] > 0)
 472                np->full_duplex = 1;
 473
 474        if (np->full_duplex)
 475                np->duplex_lock = 1;
 476
 477        /* The Yellowfin-specific entries in the device structure. */
 478        dev->netdev_ops = &netdev_ops;
 479        SET_ETHTOOL_OPS(dev, &ethtool_ops);
 480        dev->watchdog_timeo = TX_TIMEOUT;
 481
 482        if (mtu)
 483                dev->mtu = mtu;
 484
 485        i = register_netdev(dev);
 486        if (i)
 487                goto err_out_unmap_status;
 488
 489        printk(KERN_INFO "%s: %s type %8x at %p, %pM, IRQ %d.\n",
 490                   dev->name, pci_id_tbl[chip_idx].name,
 491                   ioread32(ioaddr + ChipRev), ioaddr,
 492                   dev->dev_addr, irq);
 493
 494        if (np->drv_flags & HasMII) {
 495                int phy, phy_idx = 0;
 496                for (phy = 0; phy < 32 && phy_idx < MII_CNT; phy++) {
 497                        int mii_status = mdio_read(ioaddr, phy, 1);
 498                        if (mii_status != 0xffff  &&  mii_status != 0x0000) {
 499                                np->phys[phy_idx++] = phy;
 500                                np->advertising = mdio_read(ioaddr, phy, 4);
 501                                printk(KERN_INFO "%s: MII PHY found at address %d, status "
 502                                           "0x%4.4x advertising %4.4x.\n",
 503                                           dev->name, phy, mii_status, np->advertising);
 504                        }
 505                }
 506                np->mii_cnt = phy_idx;
 507        }
 508
 509        find_cnt++;
 510
 511        return 0;
 512
 513err_out_unmap_status:
 514        pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
 515                np->tx_status_dma);
 516err_out_unmap_rx:
 517        pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
 518err_out_unmap_tx:
 519        pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
 520err_out_cleardev:
 521        pci_set_drvdata(pdev, NULL);
 522        pci_iounmap(pdev, ioaddr);
 523err_out_free_res:
 524        pci_release_regions(pdev);
 525err_out_free_netdev:
 526        free_netdev (dev);
 527        return -ENODEV;
 528}
 529
 530static int __devinit read_eeprom(void __iomem *ioaddr, int location)
 531{
 532        int bogus_cnt = 10000;          /* Typical 33Mhz: 1050 ticks */
 533
 534        iowrite8(location, ioaddr + EEAddr);
 535        iowrite8(0x30 | ((location >> 8) & 7), ioaddr + EECtrl);
 536        while ((ioread8(ioaddr + EEStatus) & 0x80)  &&  --bogus_cnt > 0)
 537                ;
 538        return ioread8(ioaddr + EERead);
 539}
 540
 541/* MII Managemen Data I/O accesses.
 542   These routines assume the MDIO controller is idle, and do not exit until
 543   the command is finished. */
 544
 545static int mdio_read(void __iomem *ioaddr, int phy_id, int location)
 546{
 547        int i;
 548
 549        iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
 550        iowrite16(1, ioaddr + MII_Cmd);
 551        for (i = 10000; i >= 0; i--)
 552                if ((ioread16(ioaddr + MII_Status) & 1) == 0)
 553                        break;
 554        return ioread16(ioaddr + MII_Rd_Data);
 555}
 556
 557static void mdio_write(void __iomem *ioaddr, int phy_id, int location, int value)
 558{
 559        int i;
 560
 561        iowrite16((phy_id<<8) + location, ioaddr + MII_Addr);
 562        iowrite16(value, ioaddr + MII_Wr_Data);
 563
 564        /* Wait for the command to finish. */
 565        for (i = 10000; i >= 0; i--)
 566                if ((ioread16(ioaddr + MII_Status) & 1) == 0)
 567                        break;
 568        return;
 569}
 570
 571
 572static int yellowfin_open(struct net_device *dev)
 573{
 574        struct yellowfin_private *yp = netdev_priv(dev);
 575        void __iomem *ioaddr = yp->base;
 576        int i;
 577
 578        /* Reset the chip. */
 579        iowrite32(0x80000000, ioaddr + DMACtrl);
 580
 581        i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
 582        if (i) return i;
 583
 584        if (yellowfin_debug > 1)
 585                printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n",
 586                           dev->name, dev->irq);
 587
 588        yellowfin_init_ring(dev);
 589
 590        iowrite32(yp->rx_ring_dma, ioaddr + RxPtr);
 591        iowrite32(yp->tx_ring_dma, ioaddr + TxPtr);
 592
 593        for (i = 0; i < 6; i++)
 594                iowrite8(dev->dev_addr[i], ioaddr + StnAddr + i);
 595
 596        /* Set up various condition 'select' registers.
 597           There are no options here. */
 598        iowrite32(0x00800080, ioaddr + TxIntrSel);      /* Interrupt on Tx abort */
 599        iowrite32(0x00800080, ioaddr + TxBranchSel);    /* Branch on Tx abort */
 600        iowrite32(0x00400040, ioaddr + TxWaitSel);      /* Wait on Tx status */
 601        iowrite32(0x00400040, ioaddr + RxIntrSel);      /* Interrupt on Rx done */
 602        iowrite32(0x00400040, ioaddr + RxBranchSel);    /* Branch on Rx error */
 603        iowrite32(0x00400040, ioaddr + RxWaitSel);      /* Wait on Rx done */
 604
 605        /* Initialize other registers: with so many this eventually this will
 606           converted to an offset/value list. */
 607        iowrite32(dma_ctrl, ioaddr + DMACtrl);
 608        iowrite16(fifo_cfg, ioaddr + FIFOcfg);
 609        /* Enable automatic generation of flow control frames, period 0xffff. */
 610        iowrite32(0x0030FFFF, ioaddr + FlowCtrl);
 611
 612        yp->tx_threshold = 32;
 613        iowrite32(yp->tx_threshold, ioaddr + TxThreshold);
 614
 615        if (dev->if_port == 0)
 616                dev->if_port = yp->default_port;
 617
 618        netif_start_queue(dev);
 619
 620        /* Setting the Rx mode will start the Rx process. */
 621        if (yp->drv_flags & IsGigabit) {
 622                /* We are always in full-duplex mode with gigabit! */
 623                yp->full_duplex = 1;
 624                iowrite16(0x01CF, ioaddr + Cnfg);
 625        } else {
 626                iowrite16(0x0018, ioaddr + FrameGap0); /* 0060/4060 for non-MII 10baseT */
 627                iowrite16(0x1018, ioaddr + FrameGap1);
 628                iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
 629        }
 630        set_rx_mode(dev);
 631
 632        /* Enable interrupts by setting the interrupt mask. */
 633        iowrite16(0x81ff, ioaddr + IntrEnb);                    /* See enum intr_status_bits */
 634        iowrite16(0x0000, ioaddr + EventStatus);                /* Clear non-interrupting events */
 635        iowrite32(0x80008000, ioaddr + RxCtrl);         /* Start Rx and Tx channels. */
 636        iowrite32(0x80008000, ioaddr + TxCtrl);
 637
 638        if (yellowfin_debug > 2) {
 639                printk(KERN_DEBUG "%s: Done yellowfin_open().\n",
 640                           dev->name);
 641        }
 642
 643        /* Set the timer to check for link beat. */
 644        init_timer(&yp->timer);
 645        yp->timer.expires = jiffies + 3*HZ;
 646        yp->timer.data = (unsigned long)dev;
 647        yp->timer.function = &yellowfin_timer;                          /* timer handler */
 648        add_timer(&yp->timer);
 649
 650        return 0;
 651}
 652
 653static void yellowfin_timer(unsigned long data)
 654{
 655        struct net_device *dev = (struct net_device *)data;
 656        struct yellowfin_private *yp = netdev_priv(dev);
 657        void __iomem *ioaddr = yp->base;
 658        int next_tick = 60*HZ;
 659
 660        if (yellowfin_debug > 3) {
 661                printk(KERN_DEBUG "%s: Yellowfin timer tick, status %8.8x.\n",
 662                           dev->name, ioread16(ioaddr + IntrStatus));
 663        }
 664
 665        if (yp->mii_cnt) {
 666                int bmsr = mdio_read(ioaddr, yp->phys[0], MII_BMSR);
 667                int lpa = mdio_read(ioaddr, yp->phys[0], MII_LPA);
 668                int negotiated = lpa & yp->advertising;
 669                if (yellowfin_debug > 1)
 670                        printk(KERN_DEBUG "%s: MII #%d status register is %4.4x, "
 671                                   "link partner capability %4.4x.\n",
 672                                   dev->name, yp->phys[0], bmsr, lpa);
 673
 674                yp->full_duplex = mii_duplex(yp->duplex_lock, negotiated);
 675
 676                iowrite16(0x101C | (yp->full_duplex ? 2 : 0), ioaddr + Cnfg);
 677
 678                if (bmsr & BMSR_LSTATUS)
 679                        next_tick = 60*HZ;
 680                else
 681                        next_tick = 3*HZ;
 682        }
 683
 684        yp->timer.expires = jiffies + next_tick;
 685        add_timer(&yp->timer);
 686}
 687
 688static void yellowfin_tx_timeout(struct net_device *dev)
 689{
 690        struct yellowfin_private *yp = netdev_priv(dev);
 691        void __iomem *ioaddr = yp->base;
 692
 693        printk(KERN_WARNING "%s: Yellowfin transmit timed out at %d/%d Tx "
 694                   "status %4.4x, Rx status %4.4x, resetting...\n",
 695                   dev->name, yp->cur_tx, yp->dirty_tx,
 696                   ioread32(ioaddr + TxStatus), ioread32(ioaddr + RxStatus));
 697
 698        /* Note: these should be KERN_DEBUG. */
 699        if (yellowfin_debug) {
 700                int i;
 701                printk(KERN_WARNING "  Rx ring %p: ", yp->rx_ring);
 702                for (i = 0; i < RX_RING_SIZE; i++)
 703                        printk(" %8.8x", yp->rx_ring[i].result_status);
 704                printk("\n"KERN_WARNING"  Tx ring %p: ", yp->tx_ring);
 705                for (i = 0; i < TX_RING_SIZE; i++)
 706                        printk(" %4.4x /%8.8x", yp->tx_status[i].tx_errs,
 707                                   yp->tx_ring[i].result_status);
 708                printk("\n");
 709        }
 710
 711        /* If the hardware is found to hang regularly, we will update the code
 712           to reinitialize the chip here. */
 713        dev->if_port = 0;
 714
 715        /* Wake the potentially-idle transmit channel. */
 716        iowrite32(0x10001000, yp->base + TxCtrl);
 717        if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
 718                netif_wake_queue (dev);         /* Typical path */
 719
 720        dev->trans_start = jiffies;
 721        dev->stats.tx_errors++;
 722}
 723
 724/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
 725static void yellowfin_init_ring(struct net_device *dev)
 726{
 727        struct yellowfin_private *yp = netdev_priv(dev);
 728        int i;
 729
 730        yp->tx_full = 0;
 731        yp->cur_rx = yp->cur_tx = 0;
 732        yp->dirty_tx = 0;
 733
 734        yp->rx_buf_sz = (dev->mtu <= 1500 ? PKT_BUF_SZ : dev->mtu + 32);
 735
 736        for (i = 0; i < RX_RING_SIZE; i++) {
 737                yp->rx_ring[i].dbdma_cmd =
 738                        cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
 739                yp->rx_ring[i].branch_addr = cpu_to_le32(yp->rx_ring_dma +
 740                        ((i+1)%RX_RING_SIZE)*sizeof(struct yellowfin_desc));
 741        }
 742
 743        for (i = 0; i < RX_RING_SIZE; i++) {
 744                struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
 745                yp->rx_skbuff[i] = skb;
 746                if (skb == NULL)
 747                        break;
 748                skb->dev = dev;         /* Mark as being used by this device. */
 749                skb_reserve(skb, 2);    /* 16 byte align the IP header. */
 750                yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
 751                        skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 752        }
 753        yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP);
 754        yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
 755
 756#define NO_TXSTATS
 757#ifdef NO_TXSTATS
 758        /* In this mode the Tx ring needs only a single descriptor. */
 759        for (i = 0; i < TX_RING_SIZE; i++) {
 760                yp->tx_skbuff[i] = NULL;
 761                yp->tx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
 762                yp->tx_ring[i].branch_addr = cpu_to_le32(yp->tx_ring_dma +
 763                        ((i+1)%TX_RING_SIZE)*sizeof(struct yellowfin_desc));
 764        }
 765        /* Wrap ring */
 766        yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS);
 767#else
 768{
 769        int j;
 770
 771        /* Tx ring needs a pair of descriptors, the second for the status. */
 772        for (i = 0; i < TX_RING_SIZE; i++) {
 773                j = 2*i;
 774                yp->tx_skbuff[i] = 0;
 775                /* Branch on Tx error. */
 776                yp->tx_ring[j].dbdma_cmd = cpu_to_le32(CMD_STOP);
 777                yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
 778                        (j+1)*sizeof(struct yellowfin_desc));
 779                j++;
 780                if (yp->flags & FullTxStatus) {
 781                        yp->tx_ring[j].dbdma_cmd =
 782                                cpu_to_le32(CMD_TXSTATUS | sizeof(*yp->tx_status));
 783                        yp->tx_ring[j].request_cnt = sizeof(*yp->tx_status);
 784                        yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
 785                                i*sizeof(struct tx_status_words));
 786                } else {
 787                        /* Symbios chips write only tx_errs word. */
 788                        yp->tx_ring[j].dbdma_cmd =
 789                                cpu_to_le32(CMD_TXSTATUS | INTR_ALWAYS | 2);
 790                        yp->tx_ring[j].request_cnt = 2;
 791                        /* Om pade ummmmm... */
 792                        yp->tx_ring[j].addr = cpu_to_le32(yp->tx_status_dma +
 793                                i*sizeof(struct tx_status_words) +
 794                                &(yp->tx_status[0].tx_errs) -
 795                                &(yp->tx_status[0]));
 796                }
 797                yp->tx_ring[j].branch_addr = cpu_to_le32(yp->tx_ring_dma +
 798                        ((j+1)%(2*TX_RING_SIZE))*sizeof(struct yellowfin_desc));
 799        }
 800        /* Wrap ring */
 801        yp->tx_ring[++j].dbdma_cmd |= cpu_to_le32(BRANCH_ALWAYS | INTR_ALWAYS);
 802}
 803#endif
 804        yp->tx_tail_desc = &yp->tx_status[0];
 805        return;
 806}
 807
 808static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev)
 809{
 810        struct yellowfin_private *yp = netdev_priv(dev);
 811        unsigned entry;
 812        int len = skb->len;
 813
 814        netif_stop_queue (dev);
 815
 816        /* Note: Ordering is important here, set the field with the
 817           "ownership" bit last, and only then increment cur_tx. */
 818
 819        /* Calculate the next Tx descriptor entry. */
 820        entry = yp->cur_tx % TX_RING_SIZE;
 821
 822        if (gx_fix) {   /* Note: only works for paddable protocols e.g.  IP. */
 823                int cacheline_end = ((unsigned long)skb->data + skb->len) % 32;
 824                /* Fix GX chipset errata. */
 825                if (cacheline_end > 24  || cacheline_end == 0) {
 826                        len = skb->len + 32 - cacheline_end + 1;
 827                        if (skb_padto(skb, len)) {
 828                                yp->tx_skbuff[entry] = NULL;
 829                                netif_wake_queue(dev);
 830                                return 0;
 831                        }
 832                }
 833        }
 834        yp->tx_skbuff[entry] = skb;
 835
 836#ifdef NO_TXSTATS
 837        yp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
 838                skb->data, len, PCI_DMA_TODEVICE));
 839        yp->tx_ring[entry].result_status = 0;
 840        if (entry >= TX_RING_SIZE-1) {
 841                /* New stop command. */
 842                yp->tx_ring[0].dbdma_cmd = cpu_to_le32(CMD_STOP);
 843                yp->tx_ring[TX_RING_SIZE-1].dbdma_cmd =
 844                        cpu_to_le32(CMD_TX_PKT|BRANCH_ALWAYS | len);
 845        } else {
 846                yp->tx_ring[entry+1].dbdma_cmd = cpu_to_le32(CMD_STOP);
 847                yp->tx_ring[entry].dbdma_cmd =
 848                        cpu_to_le32(CMD_TX_PKT | BRANCH_IFTRUE | len);
 849        }
 850        yp->cur_tx++;
 851#else
 852        yp->tx_ring[entry<<1].request_cnt = len;
 853        yp->tx_ring[entry<<1].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
 854                skb->data, len, PCI_DMA_TODEVICE));
 855        /* The input_last (status-write) command is constant, but we must
 856           rewrite the subsequent 'stop' command. */
 857
 858        yp->cur_tx++;
 859        {
 860                unsigned next_entry = yp->cur_tx % TX_RING_SIZE;
 861                yp->tx_ring[next_entry<<1].dbdma_cmd = cpu_to_le32(CMD_STOP);
 862        }
 863        /* Final step -- overwrite the old 'stop' command. */
 864
 865        yp->tx_ring[entry<<1].dbdma_cmd =
 866                cpu_to_le32( ((entry % 6) == 0 ? CMD_TX_PKT|INTR_ALWAYS|BRANCH_IFTRUE :
 867                                          CMD_TX_PKT | BRANCH_IFTRUE) | len);
 868#endif
 869
 870        /* Non-x86 Todo: explicitly flush cache lines here. */
 871
 872        /* Wake the potentially-idle transmit channel. */
 873        iowrite32(0x10001000, yp->base + TxCtrl);
 874
 875        if (yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE)
 876                netif_start_queue (dev);                /* Typical path */
 877        else
 878                yp->tx_full = 1;
 879        dev->trans_start = jiffies;
 880
 881        if (yellowfin_debug > 4) {
 882                printk(KERN_DEBUG "%s: Yellowfin transmit frame #%d queued in slot %d.\n",
 883                           dev->name, yp->cur_tx, entry);
 884        }
 885        return 0;
 886}
 887
 888/* The interrupt handler does all of the Rx thread work and cleans up
 889   after the Tx thread. */
 890static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance)
 891{
 892        struct net_device *dev = dev_instance;
 893        struct yellowfin_private *yp;
 894        void __iomem *ioaddr;
 895        int boguscnt = max_interrupt_work;
 896        unsigned int handled = 0;
 897
 898        yp = netdev_priv(dev);
 899        ioaddr = yp->base;
 900
 901        spin_lock (&yp->lock);
 902
 903        do {
 904                u16 intr_status = ioread16(ioaddr + IntrClear);
 905
 906                if (yellowfin_debug > 4)
 907                        printk(KERN_DEBUG "%s: Yellowfin interrupt, status %4.4x.\n",
 908                                   dev->name, intr_status);
 909
 910                if (intr_status == 0)
 911                        break;
 912                handled = 1;
 913
 914                if (intr_status & (IntrRxDone | IntrEarlyRx)) {
 915                        yellowfin_rx(dev);
 916                        iowrite32(0x10001000, ioaddr + RxCtrl);         /* Wake Rx engine. */
 917                }
 918
 919#ifdef NO_TXSTATS
 920                for (; yp->cur_tx - yp->dirty_tx > 0; yp->dirty_tx++) {
 921                        int entry = yp->dirty_tx % TX_RING_SIZE;
 922                        struct sk_buff *skb;
 923
 924                        if (yp->tx_ring[entry].result_status == 0)
 925                                break;
 926                        skb = yp->tx_skbuff[entry];
 927                        dev->stats.tx_packets++;
 928                        dev->stats.tx_bytes += skb->len;
 929                        /* Free the original skb. */
 930                        pci_unmap_single(yp->pci_dev, le32_to_cpu(yp->tx_ring[entry].addr),
 931                                skb->len, PCI_DMA_TODEVICE);
 932                        dev_kfree_skb_irq(skb);
 933                        yp->tx_skbuff[entry] = NULL;
 934                }
 935                if (yp->tx_full
 936                        && yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
 937                        /* The ring is no longer full, clear tbusy. */
 938                        yp->tx_full = 0;
 939                        netif_wake_queue(dev);
 940                }
 941#else
 942                if ((intr_status & IntrTxDone) || (yp->tx_tail_desc->tx_errs)) {
 943                        unsigned dirty_tx = yp->dirty_tx;
 944
 945                        for (dirty_tx = yp->dirty_tx; yp->cur_tx - dirty_tx > 0;
 946                                 dirty_tx++) {
 947                                /* Todo: optimize this. */
 948                                int entry = dirty_tx % TX_RING_SIZE;
 949                                u16 tx_errs = yp->tx_status[entry].tx_errs;
 950                                struct sk_buff *skb;
 951
 952#ifndef final_version
 953                                if (yellowfin_debug > 5)
 954                                        printk(KERN_DEBUG "%s: Tx queue %d check, Tx status "
 955                                                   "%4.4x %4.4x %4.4x %4.4x.\n",
 956                                                   dev->name, entry,
 957                                                   yp->tx_status[entry].tx_cnt,
 958                                                   yp->tx_status[entry].tx_errs,
 959                                                   yp->tx_status[entry].total_tx_cnt,
 960                                                   yp->tx_status[entry].paused);
 961#endif
 962                                if (tx_errs == 0)
 963                                        break;  /* It still hasn't been Txed */
 964                                skb = yp->tx_skbuff[entry];
 965                                if (tx_errs & 0xF810) {
 966                                        /* There was an major error, log it. */
 967#ifndef final_version
 968                                        if (yellowfin_debug > 1)
 969                                                printk(KERN_DEBUG "%s: Transmit error, Tx status %4.4x.\n",
 970                                                           dev->name, tx_errs);
 971#endif
 972                                        dev->stats.tx_errors++;
 973                                        if (tx_errs & 0xF800) dev->stats.tx_aborted_errors++;
 974                                        if (tx_errs & 0x0800) dev->stats.tx_carrier_errors++;
 975                                        if (tx_errs & 0x2000) dev->stats.tx_window_errors++;
 976                                        if (tx_errs & 0x8000) dev->stats.tx_fifo_errors++;
 977                                } else {
 978#ifndef final_version
 979                                        if (yellowfin_debug > 4)
 980                                                printk(KERN_DEBUG "%s: Normal transmit, Tx status %4.4x.\n",
 981                                                           dev->name, tx_errs);
 982#endif
 983                                        dev->stats.tx_bytes += skb->len;
 984                                        dev->stats.collisions += tx_errs & 15;
 985                                        dev->stats.tx_packets++;
 986                                }
 987                                /* Free the original skb. */
 988                                pci_unmap_single(yp->pci_dev,
 989                                        yp->tx_ring[entry<<1].addr, skb->len,
 990                                        PCI_DMA_TODEVICE);
 991                                dev_kfree_skb_irq(skb);
 992                                yp->tx_skbuff[entry] = 0;
 993                                /* Mark status as empty. */
 994                                yp->tx_status[entry].tx_errs = 0;
 995                        }
 996
 997#ifndef final_version
 998                        if (yp->cur_tx - dirty_tx > TX_RING_SIZE) {
 999                                printk(KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
1000                                           dev->name, dirty_tx, yp->cur_tx, yp->tx_full);
1001                                dirty_tx += TX_RING_SIZE;
1002                        }
1003#endif
1004
1005                        if (yp->tx_full
1006                                && yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
1007                                /* The ring is no longer full, clear tbusy. */
1008                                yp->tx_full = 0;
1009                                netif_wake_queue(dev);
1010                        }
1011
1012                        yp->dirty_tx = dirty_tx;
1013                        yp->tx_tail_desc = &yp->tx_status[dirty_tx % TX_RING_SIZE];
1014                }
1015#endif
1016
1017                /* Log errors and other uncommon events. */
1018                if (intr_status & 0x2ee)        /* Abnormal error summary. */
1019                        yellowfin_error(dev, intr_status);
1020
1021                if (--boguscnt < 0) {
1022                        printk(KERN_WARNING "%s: Too much work at interrupt, "
1023                                   "status=0x%4.4x.\n",
1024                                   dev->name, intr_status);
1025                        break;
1026                }
1027        } while (1);
1028
1029        if (yellowfin_debug > 3)
1030                printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
1031                           dev->name, ioread16(ioaddr + IntrStatus));
1032
1033        spin_unlock (&yp->lock);
1034        return IRQ_RETVAL(handled);
1035}
1036
1037/* This routine is logically part of the interrupt handler, but separated
1038   for clarity and better register allocation. */
1039static int yellowfin_rx(struct net_device *dev)
1040{
1041        struct yellowfin_private *yp = netdev_priv(dev);
1042        int entry = yp->cur_rx % RX_RING_SIZE;
1043        int boguscnt = yp->dirty_rx + RX_RING_SIZE - yp->cur_rx;
1044
1045        if (yellowfin_debug > 4) {
1046                printk(KERN_DEBUG " In yellowfin_rx(), entry %d status %8.8x.\n",
1047                           entry, yp->rx_ring[entry].result_status);
1048                printk(KERN_DEBUG "   #%d desc. %8.8x %8.8x %8.8x.\n",
1049                           entry, yp->rx_ring[entry].dbdma_cmd, yp->rx_ring[entry].addr,
1050                           yp->rx_ring[entry].result_status);
1051        }
1052
1053        /* If EOP is set on the next entry, it's a new packet. Send it up. */
1054        while (1) {
1055                struct yellowfin_desc *desc = &yp->rx_ring[entry];
1056                struct sk_buff *rx_skb = yp->rx_skbuff[entry];
1057                s16 frame_status;
1058                u16 desc_status;
1059                int data_size;
1060                u8 *buf_addr;
1061
1062                if(!desc->result_status)
1063                        break;
1064                pci_dma_sync_single_for_cpu(yp->pci_dev, le32_to_cpu(desc->addr),
1065                        yp->rx_buf_sz, PCI_DMA_FROMDEVICE);
1066                desc_status = le32_to_cpu(desc->result_status) >> 16;
1067                buf_addr = rx_skb->data;
1068                data_size = (le32_to_cpu(desc->dbdma_cmd) -
1069                        le32_to_cpu(desc->result_status)) & 0xffff;
1070                frame_status = get_unaligned_le16(&(buf_addr[data_size - 2]));
1071                if (yellowfin_debug > 4)
1072                        printk(KERN_DEBUG "  yellowfin_rx() status was %4.4x.\n",
1073                                   frame_status);
1074                if (--boguscnt < 0)
1075                        break;
1076                if ( ! (desc_status & RX_EOP)) {
1077                        if (data_size != 0)
1078                                printk(KERN_WARNING "%s: Oversized Ethernet frame spanned multiple buffers,"
1079                                           " status %4.4x, data_size %d!\n", dev->name, desc_status, data_size);
1080                        dev->stats.rx_length_errors++;
1081                } else if ((yp->drv_flags & IsGigabit)  &&  (frame_status & 0x0038)) {
1082                        /* There was a error. */
1083                        if (yellowfin_debug > 3)
1084                                printk(KERN_DEBUG "  yellowfin_rx() Rx error was %4.4x.\n",
1085                                           frame_status);
1086                        dev->stats.rx_errors++;
1087                        if (frame_status & 0x0060) dev->stats.rx_length_errors++;
1088                        if (frame_status & 0x0008) dev->stats.rx_frame_errors++;
1089                        if (frame_status & 0x0010) dev->stats.rx_crc_errors++;
1090                        if (frame_status < 0) dev->stats.rx_dropped++;
1091                } else if ( !(yp->drv_flags & IsGigabit)  &&
1092                                   ((buf_addr[data_size-1] & 0x85) || buf_addr[data_size-2] & 0xC0)) {
1093                        u8 status1 = buf_addr[data_size-2];
1094                        u8 status2 = buf_addr[data_size-1];
1095                        dev->stats.rx_errors++;
1096                        if (status1 & 0xC0) dev->stats.rx_length_errors++;
1097                        if (status2 & 0x03) dev->stats.rx_frame_errors++;
1098                        if (status2 & 0x04) dev->stats.rx_crc_errors++;
1099                        if (status2 & 0x80) dev->stats.rx_dropped++;
1100#ifdef YF_PROTOTYPE             /* Support for prototype hardware errata. */
1101                } else if ((yp->flags & HasMACAddrBug)  &&
1102                        memcmp(le32_to_cpu(yp->rx_ring_dma +
1103                                entry*sizeof(struct yellowfin_desc)),
1104                                dev->dev_addr, 6) != 0 &&
1105                        memcmp(le32_to_cpu(yp->rx_ring_dma +
1106                                entry*sizeof(struct yellowfin_desc)),
1107                                "\377\377\377\377\377\377", 6) != 0) {
1108                        if (bogus_rx++ == 0)
1109                                printk(KERN_WARNING "%s: Bad frame to %pM\n",
1110                                           dev->name, buf_addr);
1111#endif
1112                } else {
1113                        struct sk_buff *skb;
1114                        int pkt_len = data_size -
1115                                (yp->chip_id ? 7 : 8 + buf_addr[data_size - 8]);
1116                        /* To verify: Yellowfin Length should omit the CRC! */
1117
1118#ifndef final_version
1119                        if (yellowfin_debug > 4)
1120                                printk(KERN_DEBUG "  yellowfin_rx() normal Rx pkt length %d"
1121                                           " of %d, bogus_cnt %d.\n",
1122                                           pkt_len, data_size, boguscnt);
1123#endif
1124                        /* Check if the packet is long enough to just pass up the skbuff
1125                           without copying to a properly sized skbuff. */
1126                        if (pkt_len > rx_copybreak) {
1127                                skb_put(skb = rx_skb, pkt_len);
1128                                pci_unmap_single(yp->pci_dev,
1129                                        le32_to_cpu(yp->rx_ring[entry].addr),
1130                                        yp->rx_buf_sz,
1131                                        PCI_DMA_FROMDEVICE);
1132                                yp->rx_skbuff[entry] = NULL;
1133                        } else {
1134                                skb = dev_alloc_skb(pkt_len + 2);
1135                                if (skb == NULL)
1136                                        break;
1137                                skb_reserve(skb, 2);    /* 16 byte align the IP header */
1138                                skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
1139                                skb_put(skb, pkt_len);
1140                                pci_dma_sync_single_for_device(yp->pci_dev,
1141                                                                le32_to_cpu(desc->addr),
1142                                                                yp->rx_buf_sz,
1143                                                                PCI_DMA_FROMDEVICE);
1144                        }
1145                        skb->protocol = eth_type_trans(skb, dev);
1146                        netif_rx(skb);
1147                        dev->stats.rx_packets++;
1148                        dev->stats.rx_bytes += pkt_len;
1149                }
1150                entry = (++yp->cur_rx) % RX_RING_SIZE;
1151        }
1152
1153        /* Refill the Rx ring buffers. */
1154        for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
1155                entry = yp->dirty_rx % RX_RING_SIZE;
1156                if (yp->rx_skbuff[entry] == NULL) {
1157                        struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
1158                        if (skb == NULL)
1159                                break;                          /* Better luck next round. */
1160                        yp->rx_skbuff[entry] = skb;
1161                        skb->dev = dev; /* Mark as being used by this device. */
1162                        skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
1163                        yp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(yp->pci_dev,
1164                                skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE));
1165                }
1166                yp->rx_ring[entry].dbdma_cmd = cpu_to_le32(CMD_STOP);
1167                yp->rx_ring[entry].result_status = 0;   /* Clear complete bit. */
1168                if (entry != 0)
1169                        yp->rx_ring[entry - 1].dbdma_cmd =
1170                                cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | yp->rx_buf_sz);
1171                else
1172                        yp->rx_ring[RX_RING_SIZE - 1].dbdma_cmd =
1173                                cpu_to_le32(CMD_RX_BUF | INTR_ALWAYS | BRANCH_ALWAYS
1174                                                        | yp->rx_buf_sz);
1175        }
1176
1177        return 0;
1178}
1179
1180static void yellowfin_error(struct net_device *dev, int intr_status)
1181{
1182        printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
1183                   dev->name, intr_status);
1184        /* Hmmmmm, it's not clear what to do here. */
1185        if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
1186                dev->stats.tx_errors++;
1187        if (intr_status & (IntrRxPCIErr | IntrRxPCIFault))
1188                dev->stats.rx_errors++;
1189}
1190
1191static int yellowfin_close(struct net_device *dev)
1192{
1193        struct yellowfin_private *yp = netdev_priv(dev);
1194        void __iomem *ioaddr = yp->base;
1195        int i;
1196
1197        netif_stop_queue (dev);
1198
1199        if (yellowfin_debug > 1) {
1200                printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %4.4x "
1201                           "Rx %4.4x Int %2.2x.\n",
1202                           dev->name, ioread16(ioaddr + TxStatus),
1203                           ioread16(ioaddr + RxStatus),
1204                           ioread16(ioaddr + IntrStatus));
1205                printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d,  Rx %d / %d.\n",
1206                           dev->name, yp->cur_tx, yp->dirty_tx, yp->cur_rx, yp->dirty_rx);
1207        }
1208
1209        /* Disable interrupts by clearing the interrupt mask. */
1210        iowrite16(0x0000, ioaddr + IntrEnb);
1211
1212        /* Stop the chip's Tx and Rx processes. */
1213        iowrite32(0x80000000, ioaddr + RxCtrl);
1214        iowrite32(0x80000000, ioaddr + TxCtrl);
1215
1216        del_timer(&yp->timer);
1217
1218#if defined(__i386__)
1219        if (yellowfin_debug > 2) {
1220                printk("\n"KERN_DEBUG"  Tx ring at %8.8llx:\n",
1221                                (unsigned long long)yp->tx_ring_dma);
1222                for (i = 0; i < TX_RING_SIZE*2; i++)
1223                        printk(" %c #%d desc. %8.8x %8.8x %8.8x %8.8x.\n",
1224                                   ioread32(ioaddr + TxPtr) == (long)&yp->tx_ring[i] ? '>' : ' ',
1225                                   i, yp->tx_ring[i].dbdma_cmd, yp->tx_ring[i].addr,
1226                                   yp->tx_ring[i].branch_addr, yp->tx_ring[i].result_status);
1227                printk(KERN_DEBUG "  Tx status %p:\n", yp->tx_status);
1228                for (i = 0; i < TX_RING_SIZE; i++)
1229                        printk("   #%d status %4.4x %4.4x %4.4x %4.4x.\n",
1230                                   i, yp->tx_status[i].tx_cnt, yp->tx_status[i].tx_errs,
1231                                   yp->tx_status[i].total_tx_cnt, yp->tx_status[i].paused);
1232
1233                printk("\n"KERN_DEBUG "  Rx ring %8.8llx:\n",
1234                                (unsigned long long)yp->rx_ring_dma);
1235                for (i = 0; i < RX_RING_SIZE; i++) {
1236                        printk(KERN_DEBUG " %c #%d desc. %8.8x %8.8x %8.8x\n",
1237                                   ioread32(ioaddr + RxPtr) == (long)&yp->rx_ring[i] ? '>' : ' ',
1238                                   i, yp->rx_ring[i].dbdma_cmd, yp->rx_ring[i].addr,
1239                                   yp->rx_ring[i].result_status);
1240                        if (yellowfin_debug > 6) {
1241                                if (get_unaligned((u8*)yp->rx_ring[i].addr) != 0x69) {
1242                                        int j;
1243                                        for (j = 0; j < 0x50; j++)
1244                                                printk(" %4.4x",
1245                                                           get_unaligned(((u16*)yp->rx_ring[i].addr) + j));
1246                                        printk("\n");
1247                                }
1248                        }
1249                }
1250        }
1251#endif /* __i386__ debugging only */
1252
1253        free_irq(dev->irq, dev);
1254
1255        /* Free all the skbuffs in the Rx queue. */
1256        for (i = 0; i < RX_RING_SIZE; i++) {
1257                yp->rx_ring[i].dbdma_cmd = cpu_to_le32(CMD_STOP);
1258                yp->rx_ring[i].addr = cpu_to_le32(0xBADF00D0); /* An invalid address. */
1259                if (yp->rx_skbuff[i]) {
1260                        dev_kfree_skb(yp->rx_skbuff[i]);
1261                }
1262                yp->rx_skbuff[i] = NULL;
1263        }
1264        for (i = 0; i < TX_RING_SIZE; i++) {
1265                if (yp->tx_skbuff[i])
1266                        dev_kfree_skb(yp->tx_skbuff[i]);
1267                yp->tx_skbuff[i] = NULL;
1268        }
1269
1270#ifdef YF_PROTOTYPE                     /* Support for prototype hardware errata. */
1271        if (yellowfin_debug > 0) {
1272                printk(KERN_DEBUG "%s: Received %d frames that we should not have.\n",
1273                           dev->name, bogus_rx);
1274        }
1275#endif
1276
1277        return 0;
1278}
1279
1280/* Set or clear the multicast filter for this adaptor. */
1281
1282static void set_rx_mode(struct net_device *dev)
1283{
1284        struct yellowfin_private *yp = netdev_priv(dev);
1285        void __iomem *ioaddr = yp->base;
1286        u16 cfg_value = ioread16(ioaddr + Cnfg);
1287
1288        /* Stop the Rx process to change any value. */
1289        iowrite16(cfg_value & ~0x1000, ioaddr + Cnfg);
1290        if (dev->flags & IFF_PROMISC) {                 /* Set promiscuous. */
1291                iowrite16(0x000F, ioaddr + AddrMode);
1292        } else if ((dev->mc_count > 64)  ||  (dev->flags & IFF_ALLMULTI)) {
1293                /* Too many to filter well, or accept all multicasts. */
1294                iowrite16(0x000B, ioaddr + AddrMode);
1295        } else if (dev->mc_count > 0) { /* Must use the multicast hash table. */
1296                struct dev_mc_list *mclist;
1297                u16 hash_table[4];
1298                int i;
1299                memset(hash_table, 0, sizeof(hash_table));
1300                for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
1301                         i++, mclist = mclist->next) {
1302                        unsigned int bit;
1303
1304                        /* Due to a bug in the early chip versions, multiple filter
1305                           slots must be set for each address. */
1306                        if (yp->drv_flags & HasMulticastBug) {
1307                                bit = (ether_crc_le(3, mclist->dmi_addr) >> 3) & 0x3f;
1308                                hash_table[bit >> 4] |= (1 << bit);
1309                                bit = (ether_crc_le(4, mclist->dmi_addr) >> 3) & 0x3f;
1310                                hash_table[bit >> 4] |= (1 << bit);
1311                                bit = (ether_crc_le(5, mclist->dmi_addr) >> 3) & 0x3f;
1312                                hash_table[bit >> 4] |= (1 << bit);
1313                        }
1314                        bit = (ether_crc_le(6, mclist->dmi_addr) >> 3) & 0x3f;
1315                        hash_table[bit >> 4] |= (1 << bit);
1316                }
1317                /* Copy the hash table to the chip. */
1318                for (i = 0; i < 4; i++)
1319                        iowrite16(hash_table[i], ioaddr + HashTbl + i*2);
1320                iowrite16(0x0003, ioaddr + AddrMode);
1321        } else {                                        /* Normal, unicast/broadcast-only mode. */
1322                iowrite16(0x0001, ioaddr + AddrMode);
1323        }
1324        /* Restart the Rx process. */
1325        iowrite16(cfg_value | 0x1000, ioaddr + Cnfg);
1326}
1327
1328static void yellowfin_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1329{
1330        struct yellowfin_private *np = netdev_priv(dev);
1331        strcpy(info->driver, DRV_NAME);
1332        strcpy(info->version, DRV_VERSION);
1333        strcpy(info->bus_info, pci_name(np->pci_dev));
1334}
1335
1336static const struct ethtool_ops ethtool_ops = {
1337        .get_drvinfo = yellowfin_get_drvinfo
1338};
1339
1340static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1341{
1342        struct yellowfin_private *np = netdev_priv(dev);
1343        void __iomem *ioaddr = np->base;
1344        struct mii_ioctl_data *data = if_mii(rq);
1345
1346        switch(cmd) {
1347        case SIOCGMIIPHY:               /* Get address of MII PHY in use. */
1348                data->phy_id = np->phys[0] & 0x1f;
1349                /* Fall Through */
1350
1351        case SIOCGMIIREG:               /* Read MII PHY register. */
1352                data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f);
1353                return 0;
1354
1355        case SIOCSMIIREG:               /* Write MII PHY register. */
1356                if (!capable(CAP_NET_ADMIN))
1357                        return -EPERM;
1358                if (data->phy_id == np->phys[0]) {
1359                        u16 value = data->val_in;
1360                        switch (data->reg_num) {
1361                        case 0:
1362                                /* Check for autonegotiation on or reset. */
1363                                np->medialock = (value & 0x9000) ? 0 : 1;
1364                                if (np->medialock)
1365                                        np->full_duplex = (value & 0x0100) ? 1 : 0;
1366                                break;
1367                        case 4: np->advertising = value; break;
1368                        }
1369                        /* Perhaps check_duplex(dev), depending on chip semantics. */
1370                }
1371                mdio_write(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
1372                return 0;
1373        default:
1374                return -EOPNOTSUPP;
1375        }
1376}
1377
1378
1379static void __devexit yellowfin_remove_one (struct pci_dev *pdev)
1380{
1381        struct net_device *dev = pci_get_drvdata(pdev);
1382        struct yellowfin_private *np;
1383
1384        BUG_ON(!dev);
1385        np = netdev_priv(dev);
1386
1387        pci_free_consistent(pdev, STATUS_TOTAL_SIZE, np->tx_status,
1388                np->tx_status_dma);
1389        pci_free_consistent(pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma);
1390        pci_free_consistent(pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma);
1391        unregister_netdev (dev);
1392
1393        pci_iounmap(pdev, np->base);
1394
1395        pci_release_regions (pdev);
1396
1397        free_netdev (dev);
1398        pci_set_drvdata(pdev, NULL);
1399}
1400
1401
1402static struct pci_driver yellowfin_driver = {
1403        .name           = DRV_NAME,
1404        .id_table       = yellowfin_pci_tbl,
1405        .probe          = yellowfin_init_one,
1406        .remove         = __devexit_p(yellowfin_remove_one),
1407};
1408
1409
1410static int __init yellowfin_init (void)
1411{
1412/* when a module, this is printed whether or not devices are found in probe */
1413#ifdef MODULE
1414        printk(version);
1415#endif
1416        return pci_register_driver(&yellowfin_driver);
1417}
1418
1419
1420static void __exit yellowfin_cleanup (void)
1421{
1422        pci_unregister_driver (&yellowfin_driver);
1423}
1424
1425
1426module_init(yellowfin_init);
1427module_exit(yellowfin_cleanup);
1428
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.