/******************************************************************************
 *
 * Module Name: exsystem - Interface to OS services
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2008, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include <acpi/acinterp.h>

#define _COMPONENT          ACPI_EXECUTER
ACPI_MODULE_NAME("exsystem")

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_wait_semaphore
 *
 * PARAMETERS:  Semaphore       - Semaphore to wait on
 *              Timeout         - Max time to wait
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Implements a semaphore wait with a check to see if the
 *              semaphore is available immediately.  If it is not, the
 *              interpreter is released before waiting.
 *
 ******************************************************************************/
acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);

        status = acpi_os_wait_semaphore(semaphore, 1, ACPI_DO_NOT_WAIT);
        if (ACPI_SUCCESS(status)) {
                return_ACPI_STATUS(status);
        }

        if (status == AE_TIME) {

                /* We must wait, so unlock the interpreter */

                acpi_ex_relinquish_interpreter();

                status = acpi_os_wait_semaphore(semaphore, 1, timeout);

                ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
                                  "*** Thread awake after blocking, %s\n",
                                  acpi_format_exception(status)));

                /* Reacquire the interpreter */

                acpi_ex_reacquire_interpreter();
        }

        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_wait_mutex
 *
 * PARAMETERS:  Mutex           - Mutex to wait on
 *              Timeout         - Max time to wait
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Implements a mutex wait with a check to see if the
 *              mutex is available immediately.  If it is not, the
 *              interpreter is released before waiting.
 *
 ******************************************************************************/

acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
{
        acpi_status status;

        ACPI_FUNCTION_TRACE(ex_system_wait_mutex);

        status = acpi_os_acquire_mutex(mutex, ACPI_DO_NOT_WAIT);
        if (ACPI_SUCCESS(status)) {
                return_ACPI_STATUS(status);
        }

        if (status == AE_TIME) {

                /* We must wait, so unlock the interpreter */

                acpi_ex_relinquish_interpreter();

                status = acpi_os_acquire_mutex(mutex, timeout);

                ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
                                  "*** Thread awake after blocking, %s\n",
                                  acpi_format_exception(status)));

                /* Reacquire the interpreter */

                acpi_ex_reacquire_interpreter();
        }

        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_do_stall
 *
 * PARAMETERS:  how_long        - The amount of time to stall,
 *                                in microseconds
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Suspend running thread for specified amount of time.
 *              Note: ACPI specification requires that Stall() does not
 *              relinquish the processor, and delays longer than 100 usec
 *              should use Sleep() instead.  We allow stalls up to 255 usec
 *              for compatibility with other interpreters and existing BIOSs.
 *
 ******************************************************************************/

acpi_status acpi_ex_system_do_stall(u32 how_long)
{
        acpi_status status = AE_OK;

        ACPI_FUNCTION_ENTRY();

        if (how_long > 255) {   /* 255 microseconds */
                /*
                 * Longer than 255 usec, this is an error
                 *
                 * (ACPI specifies 100 usec as max, but this gives some slack in
                 * order to support existing BIOSs)
                 */
                ACPI_ERROR((AE_INFO, "Time parameter is too large (%d)",
                            how_long));
                status = AE_AML_OPERAND_VALUE;
        } else {
                acpi_os_stall(how_long);
        }

        return (status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_do_suspend
 *
 * PARAMETERS:  how_long        - The amount of time to suspend,
 *                                in milliseconds
 *
 * RETURN:      None
 *
 * DESCRIPTION: Suspend running thread for specified amount of time.
 *
 ******************************************************************************/

acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
{
        ACPI_FUNCTION_ENTRY();

        /* Since this thread will sleep, we must release the interpreter */

        acpi_ex_relinquish_interpreter();

        acpi_os_sleep(how_long);

        /* And now we must get the interpreter again */

        acpi_ex_reacquire_interpreter();
        return (AE_OK);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_signal_event
 *
 * PARAMETERS:  obj_desc        - The object descriptor for this op
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Provides an access point to perform synchronization operations
 *              within the AML.
 *
 ******************************************************************************/

acpi_status acpi_ex_system_signal_event(union acpi_operand_object * obj_desc)
{
        acpi_status status = AE_OK;

        ACPI_FUNCTION_TRACE(ex_system_signal_event);

        if (obj_desc) {
                status =
                    acpi_os_signal_semaphore(obj_desc->event.os_semaphore, 1);
        }

        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_wait_event
 *
 * PARAMETERS:  time_desc       - The 'time to delay' object descriptor
 *              obj_desc        - The object descriptor for this op
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Provides an access point to perform synchronization operations
 *              within the AML.  This operation is a request to wait for an
 *              event.
 *
 ******************************************************************************/

acpi_status
acpi_ex_system_wait_event(union acpi_operand_object *time_desc,
                          union acpi_operand_object *obj_desc)
{
        acpi_status status = AE_OK;

        ACPI_FUNCTION_TRACE(ex_system_wait_event);

        if (obj_desc) {
                status =
                    acpi_ex_system_wait_semaphore(obj_desc->event.os_semaphore,
                                                  (u16) time_desc->integer.
                                                  value);
        }

        return_ACPI_STATUS(status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ex_system_reset_event
 *
 * PARAMETERS:  obj_desc        - The object descriptor for this op
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Reset an event to a known state.
 *
 ******************************************************************************/

acpi_status acpi_ex_system_reset_event(union acpi_operand_object *obj_desc)
{
        acpi_status status = AE_OK;
        acpi_semaphore temp_semaphore;

        ACPI_FUNCTION_ENTRY();

        /*
         * We are going to simply delete the existing semaphore and
         * create a new one!
         */
        status =
            acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0, &temp_semaphore);
        if (ACPI_SUCCESS(status)) {
                (void)acpi_os_delete_semaphore(obj_desc->event.os_semaphore);
                obj_desc->event.os_semaphore = temp_semaphore;
        }

        return (status);
}