linux/drivers/pci/hotplug/shpchp_pci.c
<<
>>
Prefs
   1/*
   2 * Standard Hot Plug Controller Driver
   3 *
   4 * Copyright (C) 1995,2001 Compaq Computer Corporation
   5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
   6 * Copyright (C) 2001 IBM Corp.
   7 * Copyright (C) 2003-2004 Intel Corporation
   8 *
   9 * All rights reserved.
  10 *
  11 * This program is free software; you can redistribute it and/or modify
  12 * it under the terms of the GNU General Public License as published by
  13 * the Free Software Foundation; either version 2 of the License, or (at
  14 * your option) any later version.
  15 *
  16 * This program is distributed in the hope that it will be useful, but
  17 * WITHOUT ANY WARRANTY; without even the implied warranty of
  18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  19 * NON INFRINGEMENT.  See the GNU General Public License for more
  20 * details.
  21 *
  22 * You should have received a copy of the GNU General Public License
  23 * along with this program; if not, write to the Free Software
  24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  25 *
  26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  27 *
  28 */
  29
  30#include <linux/module.h>
  31#include <linux/kernel.h>
  32#include <linux/types.h>
  33#include <linux/pci.h>
  34#include "../pci.h"
  35#include "shpchp.h"
  36
  37static void program_fw_provided_values(struct pci_dev *dev)
  38{
  39        u16 pci_cmd, pci_bctl;
  40        struct pci_dev *cdev;
  41        struct hotplug_params hpp;
  42
  43        /* Program hpp values for this device */
  44        if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
  45                        (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
  46                        (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
  47                return;
  48
  49        /* use default values if we can't get them from firmware */
  50        if (get_hp_params_from_firmware(dev, &hpp) ||
  51            !hpp.t0 || (hpp.t0->revision > 1)) {
  52                warn("Could not get hotplug parameters. Use defaults\n");
  53                hpp.t0 = &hpp.type0_data;
  54                hpp.t0->revision = 0;
  55                hpp.t0->cache_line_size = 8;
  56                hpp.t0->latency_timer = 0x40;
  57                hpp.t0->enable_serr = 0;
  58                hpp.t0->enable_perr = 0;
  59        }
  60
  61        pci_write_config_byte(dev,
  62                              PCI_CACHE_LINE_SIZE, hpp.t0->cache_line_size);
  63        pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.t0->latency_timer);
  64        pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
  65        if (hpp.t0->enable_serr)
  66                pci_cmd |= PCI_COMMAND_SERR;
  67        else
  68                pci_cmd &= ~PCI_COMMAND_SERR;
  69        if (hpp.t0->enable_perr)
  70                pci_cmd |= PCI_COMMAND_PARITY;
  71        else
  72                pci_cmd &= ~PCI_COMMAND_PARITY;
  73        pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
  74
  75        /* Program bridge control value and child devices */
  76        if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
  77                pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
  78                                hpp.t0->latency_timer);
  79                pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
  80                if (hpp.t0->enable_serr)
  81                        pci_bctl |= PCI_BRIDGE_CTL_SERR;
  82                else
  83                        pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
  84                if (hpp.t0->enable_perr)
  85                        pci_bctl |= PCI_BRIDGE_CTL_PARITY;
  86                else
  87                        pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
  88                pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
  89                if (dev->subordinate) {
  90                        list_for_each_entry(cdev, &dev->subordinate->devices,
  91                                        bus_list)
  92                                program_fw_provided_values(cdev);
  93                }
  94        }
  95}
  96
  97int __ref shpchp_configure_device(struct slot *p_slot)
  98{
  99        struct pci_dev *dev;
 100        struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 101        int num, fn;
 102        struct controller *ctrl = p_slot->ctrl;
 103
 104        dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
 105        if (dev) {
 106                ctrl_err(ctrl, "Device %s already exists "
 107                         "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
 108                         pci_domain_nr(parent), p_slot->bus, p_slot->device);
 109                pci_dev_put(dev);
 110                return -EINVAL;
 111        }
 112
 113        num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
 114        if (num == 0) {
 115                ctrl_err(ctrl, "No new device found\n");
 116                return -ENODEV;
 117        }
 118
 119        for (fn = 0; fn < 8; fn++) {
 120                dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
 121                if (!dev)
 122                        continue;
 123                if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 124                        ctrl_err(ctrl, "Cannot hot-add display device %s\n",
 125                                 pci_name(dev));
 126                        pci_dev_put(dev);
 127                        continue;
 128                }
 129                if ((dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) ||
 130                                (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)) {
 131                        /* Find an unused bus number for the new bridge */
 132                        struct pci_bus *child;
 133                        unsigned char busnr, start = parent->secondary;
 134                        unsigned char end = parent->subordinate;
 135                        for (busnr = start; busnr <= end; busnr++) {
 136                                if (!pci_find_bus(pci_domain_nr(parent),
 137                                                        busnr))
 138                                        break;
 139                        }
 140                        if (busnr >= end) {
 141                                ctrl_err(ctrl,
 142                                         "No free bus for hot-added bridge\n");
 143                                pci_dev_put(dev);
 144                                continue;
 145                        }
 146                        child = pci_add_new_bus(parent, dev, busnr);
 147                        if (!child) {
 148                                ctrl_err(ctrl, "Cannot add new bus for %s\n",
 149                                         pci_name(dev));
 150                                pci_dev_put(dev);
 151                                continue;
 152                        }
 153                        child->subordinate = pci_do_scan_bus(child);
 154                        pci_bus_size_bridges(child);
 155                }
 156                program_fw_provided_values(dev);
 157                pci_dev_put(dev);
 158        }
 159
 160        pci_bus_assign_resources(parent);
 161        pci_bus_add_devices(parent);
 162        pci_enable_bridges(parent);
 163        return 0;
 164}
 165
 166int shpchp_unconfigure_device(struct slot *p_slot)
 167{
 168        int rc = 0;
 169        int j;
 170        u8 bctl = 0;
 171        struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
 172        struct controller *ctrl = p_slot->ctrl;
 173
 174        ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
 175                 __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
 176
 177        for (j=0; j<8 ; j++) {
 178                struct pci_dev* temp = pci_get_slot(parent,
 179                                (p_slot->device << 3) | j);
 180                if (!temp)
 181                        continue;
 182                if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
 183                        ctrl_err(ctrl, "Cannot remove display device %s\n",
 184                                 pci_name(temp));
 185                        pci_dev_put(temp);
 186                        continue;
 187                }
 188                if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 189                        pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
 190                        if (bctl & PCI_BRIDGE_CTL_VGA) {
 191                                ctrl_err(ctrl,
 192                                         "Cannot remove display device %s\n",
 193                                         pci_name(temp));
 194                                pci_dev_put(temp);
 195                                continue;
 196                        }
 197                }
 198                pci_remove_bus_device(temp);
 199                pci_dev_put(temp);
 200        }
 201        return rc;
 202}
 203
 204
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.