LXR linux/drivers/net/sk98lin/Makefile

   1#
   2# Makefile for the SysKonnect SK-98xx device driver.
   3#
   4
   5
   6#
   7# Standalone driver params
   8# SKPARAM += -DSK_KERNEL_24
   9# SKPARAM += -DSK_KERNEL_24_26
  10# SKPARAM += -DSK_KERNEL_26
  11# SKPARAM += -DSK_KERNEL_22_24
  12
  13obj-$(CONFIG_SK98LIN) += sk98lin.o
  14sk98lin-objs    :=      \
  15                skge.o          \
  16                skethtool.o     \
  17                skdim.o         \
  18                skaddr.o        \
  19                skgehwt.o       \
  20                skgeinit.o      \
  21                skgepnmi.o      \
  22                skgesirq.o      \
  23                ski2c.o         \
  24                sklm80.o        \
  25                skqueue.o       \
  26                skrlmt.o        \
  27                sktimer.o       \
  28                skvpd.o         \
  29                skxmac2.o
  30
  31# DBGDEF =  \
  32# -DDEBUG
  33
  34ifdef DEBUG
  35DBGDEF +=  \
  36-DSK_DEBUG_CHKMOD=0x00000000L \
  37-DSK_DEBUG_CHKCAT=0x00000000L
  38endif
  39
  40
  41# **** possible debug modules for SK_DEBUG_CHKMOD *****************
  42# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
  43# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
  44# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
  45# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
  46# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
  47# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
  48# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
  49# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
  50# SK_DBGMOD_DRV         0x00010000L     /* DRV module */
  51
  52# **** possible debug categories for SK_DEBUG_CHKCAT **************
  53# *** common modules ***
  54# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
  55# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
  56# SK_DBGCAT_ERR         0x00000004L     error handling paths
  57# SK_DBGCAT_TX          0x00000008L     transmit path
  58# SK_DBGCAT_RX          0x00000010L     receive path
  59# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
  60# SK_DBGCAT_QUEUE       0x00000040L     any queue management
  61# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
  62# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump
  63
  64# *** driver (file skge.c) ***
  65# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
  66# SK_DBGCAT_DRV_???             0x00020000      not used
  67# SK_DBGCAT_DRV_MCA             0x00040000      multicast
  68# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
  69# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
  70# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
  71# SK_DBGCAT_DRV_???             0x00400000      not used
  72# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
  73# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
  74# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
  75# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
  76# SK_DBGCAT_DRV_EVENT           0x08000000      driver events
  77
  78EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
  79
  80clean:
  81        rm -f core *.o *.a *.s
  82
  83
  84
  85
  86
  87
  88