linux/drivers/media/dvb/frontends/tda1004x.c
<<
>>
Prefs
   1  /*
   2     Driver for Philips tda1004xh OFDM Demodulator
   3
   4     (c) 2003, 2004 Andrew de Quincey & Robert Schlabbach
   5
   6     This program is free software; you can redistribute it and/or modify
   7     it under the terms of the GNU General Public License as published by
   8     the Free Software Foundation; either version 2 of the License, or
   9     (at your option) any later version.
  10
  11     This program is distributed in the hope that it will be useful,
  12     but WITHOUT ANY WARRANTY; without even the implied warranty of
  13     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14
  15     GNU General Public License for more details.
  16
  17     You should have received a copy of the GNU General Public License
  18     along with this program; if not, write to the Free Software
  19     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20
  21   */
  22/*
  23 * This driver needs external firmware. Please use the commands
  24 * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
  25 * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
  26 * download/extract them, and then copy them to /usr/lib/hotplug/firmware
  27 * or /lib/firmware (depending on configuration of firmware hotplug).
  28 */
  29#define TDA10045_DEFAULT_FIRMWARE "dvb-fe-tda10045.fw"
  30#define TDA10046_DEFAULT_FIRMWARE "dvb-fe-tda10046.fw"
  31
  32#include <linux/init.h>
  33#include <linux/module.h>
  34#include <linux/device.h>
  35#include <linux/jiffies.h>
  36#include <linux/string.h>
  37#include <linux/slab.h>
  38
  39#include "dvb_frontend.h"
  40#include "tda1004x.h"
  41
  42static int debug;
  43#define dprintk(args...) \
  44        do { \
  45                if (debug) printk(KERN_DEBUG "tda1004x: " args); \
  46        } while (0)
  47
  48#define TDA1004X_CHIPID          0x00
  49#define TDA1004X_AUTO            0x01
  50#define TDA1004X_IN_CONF1        0x02
  51#define TDA1004X_IN_CONF2        0x03
  52#define TDA1004X_OUT_CONF1       0x04
  53#define TDA1004X_OUT_CONF2       0x05
  54#define TDA1004X_STATUS_CD       0x06
  55#define TDA1004X_CONFC4          0x07
  56#define TDA1004X_DSSPARE2        0x0C
  57#define TDA10045H_CODE_IN        0x0D
  58#define TDA10045H_FWPAGE         0x0E
  59#define TDA1004X_SCAN_CPT        0x10
  60#define TDA1004X_DSP_CMD         0x11
  61#define TDA1004X_DSP_ARG         0x12
  62#define TDA1004X_DSP_DATA1       0x13
  63#define TDA1004X_DSP_DATA2       0x14
  64#define TDA1004X_CONFADC1        0x15
  65#define TDA1004X_CONFC1          0x16
  66#define TDA10045H_S_AGC          0x1a
  67#define TDA10046H_AGC_TUN_LEVEL  0x1a
  68#define TDA1004X_SNR             0x1c
  69#define TDA1004X_CONF_TS1        0x1e
  70#define TDA1004X_CONF_TS2        0x1f
  71#define TDA1004X_CBER_RESET      0x20
  72#define TDA1004X_CBER_MSB        0x21
  73#define TDA1004X_CBER_LSB        0x22
  74#define TDA1004X_CVBER_LUT       0x23
  75#define TDA1004X_VBER_MSB        0x24
  76#define TDA1004X_VBER_MID        0x25
  77#define TDA1004X_VBER_LSB        0x26
  78#define TDA1004X_UNCOR           0x27
  79
  80#define TDA10045H_CONFPLL_P      0x2D
  81#define TDA10045H_CONFPLL_M_MSB  0x2E
  82#define TDA10045H_CONFPLL_M_LSB  0x2F
  83#define TDA10045H_CONFPLL_N      0x30
  84
  85#define TDA10046H_CONFPLL1       0x2D
  86#define TDA10046H_CONFPLL2       0x2F
  87#define TDA10046H_CONFPLL3       0x30
  88#define TDA10046H_TIME_WREF1     0x31
  89#define TDA10046H_TIME_WREF2     0x32
  90#define TDA10046H_TIME_WREF3     0x33
  91#define TDA10046H_TIME_WREF4     0x34
  92#define TDA10046H_TIME_WREF5     0x35
  93
  94#define TDA10045H_UNSURW_MSB     0x31
  95#define TDA10045H_UNSURW_LSB     0x32
  96#define TDA10045H_WREF_MSB       0x33
  97#define TDA10045H_WREF_MID       0x34
  98#define TDA10045H_WREF_LSB       0x35
  99#define TDA10045H_MUXOUT         0x36
 100#define TDA1004X_CONFADC2        0x37
 101
 102#define TDA10045H_IOFFSET        0x38
 103
 104#define TDA10046H_CONF_TRISTATE1 0x3B
 105#define TDA10046H_CONF_TRISTATE2 0x3C
 106#define TDA10046H_CONF_POLARITY  0x3D
 107#define TDA10046H_FREQ_OFFSET    0x3E
 108#define TDA10046H_GPIO_OUT_SEL   0x41
 109#define TDA10046H_GPIO_SELECT    0x42
 110#define TDA10046H_AGC_CONF       0x43
 111#define TDA10046H_AGC_THR        0x44
 112#define TDA10046H_AGC_RENORM     0x45
 113#define TDA10046H_AGC_GAINS      0x46
 114#define TDA10046H_AGC_TUN_MIN    0x47
 115#define TDA10046H_AGC_TUN_MAX    0x48
 116#define TDA10046H_AGC_IF_MIN     0x49
 117#define TDA10046H_AGC_IF_MAX     0x4A
 118
 119#define TDA10046H_FREQ_PHY2_MSB  0x4D
 120#define TDA10046H_FREQ_PHY2_LSB  0x4E
 121
 122#define TDA10046H_CVBER_CTRL     0x4F
 123#define TDA10046H_AGC_IF_LEVEL   0x52
 124#define TDA10046H_CODE_CPT       0x57
 125#define TDA10046H_CODE_IN        0x58
 126
 127
 128static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data)
 129{
 130        int ret;
 131        u8 buf[] = { reg, data };
 132        struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
 133
 134        dprintk("%s: reg=0x%x, data=0x%x\n", __FUNCTION__, reg, data);
 135
 136        msg.addr = state->config->demod_address;
 137        ret = i2c_transfer(state->i2c, &msg, 1);
 138
 139        if (ret != 1)
 140                dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 141                        __FUNCTION__, reg, data, ret);
 142
 143        dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __FUNCTION__,
 144                reg, data, ret);
 145        return (ret != 1) ? -1 : 0;
 146}
 147
 148static int tda1004x_read_byte(struct tda1004x_state *state, int reg)
 149{
 150        int ret;
 151        u8 b0[] = { reg };
 152        u8 b1[] = { 0 };
 153        struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 },
 154                                { .flags = I2C_M_RD, .buf = b1, .len = 1 }};
 155
 156        dprintk("%s: reg=0x%x\n", __FUNCTION__, reg);
 157
 158        msg[0].addr = state->config->demod_address;
 159        msg[1].addr = state->config->demod_address;
 160        ret = i2c_transfer(state->i2c, msg, 2);
 161
 162        if (ret != 2) {
 163                dprintk("%s: error reg=0x%x, ret=%i\n", __FUNCTION__, reg,
 164                        ret);
 165                return -1;
 166        }
 167
 168        dprintk("%s: success reg=0x%x, data=0x%x, ret=%i\n", __FUNCTION__,
 169                reg, b1[0], ret);
 170        return b1[0];
 171}
 172
 173static int tda1004x_write_mask(struct tda1004x_state *state, int reg, int mask, int data)
 174{
 175        int val;
 176        dprintk("%s: reg=0x%x, mask=0x%x, data=0x%x\n", __FUNCTION__, reg,
 177                mask, data);
 178
 179        // read a byte and check
 180        val = tda1004x_read_byte(state, reg);
 181        if (val < 0)
 182                return val;
 183
 184        // mask if off
 185        val = val & ~mask;
 186        val |= data & 0xff;
 187
 188        // write it out again
 189        return tda1004x_write_byteI(state, reg, val);
 190}
 191
 192static int tda1004x_write_buf(struct tda1004x_state *state, int reg, unsigned char *buf, int len)
 193{
 194        int i;
 195        int result;
 196
 197        dprintk("%s: reg=0x%x, len=0x%x\n", __FUNCTION__, reg, len);
 198
 199        result = 0;
 200        for (i = 0; i < len; i++) {
 201                result = tda1004x_write_byteI(state, reg + i, buf[i]);
 202                if (result != 0)
 203                        break;
 204        }
 205
 206        return result;
 207}
 208
 209static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
 210{
 211        int result;
 212        dprintk("%s\n", __FUNCTION__);
 213
 214        result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
 215        msleep(20);
 216        return result;
 217}
 218
 219static int tda1004x_disable_tuner_i2c(struct tda1004x_state *state)
 220{
 221        dprintk("%s\n", __FUNCTION__);
 222
 223        return tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 0);
 224}
 225
 226static int tda10045h_set_bandwidth(struct tda1004x_state *state,
 227                                   fe_bandwidth_t bandwidth)
 228{
 229        static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f };
 230        static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb };
 231        static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 };
 232
 233        switch (bandwidth) {
 234        case BANDWIDTH_6_MHZ:
 235                tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_6mhz, sizeof(bandwidth_6mhz));
 236                break;
 237
 238        case BANDWIDTH_7_MHZ:
 239                tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_7mhz, sizeof(bandwidth_7mhz));
 240                break;
 241
 242        case BANDWIDTH_8_MHZ:
 243                tda1004x_write_buf(state, TDA10045H_CONFPLL_P, bandwidth_8mhz, sizeof(bandwidth_8mhz));
 244                break;
 245
 246        default:
 247                return -EINVAL;
 248        }
 249
 250        tda1004x_write_byteI(state, TDA10045H_IOFFSET, 0);
 251
 252        return 0;
 253}
 254
 255static int tda10046h_set_bandwidth(struct tda1004x_state *state,
 256                                   fe_bandwidth_t bandwidth)
 257{
 258        static u8 bandwidth_6mhz_53M[] = { 0x7b, 0x2e, 0x11, 0xf0, 0xd2 };
 259        static u8 bandwidth_7mhz_53M[] = { 0x6a, 0x02, 0x6a, 0x43, 0x9f };
 260        static u8 bandwidth_8mhz_53M[] = { 0x5c, 0x32, 0xc2, 0x96, 0x6d };
 261
 262        static u8 bandwidth_6mhz_48M[] = { 0x70, 0x02, 0x49, 0x24, 0x92 };
 263        static u8 bandwidth_7mhz_48M[] = { 0x60, 0x02, 0xaa, 0xaa, 0xab };
 264        static u8 bandwidth_8mhz_48M[] = { 0x54, 0x03, 0x0c, 0x30, 0xc3 };
 265        int tda10046_clk53m;
 266
 267        if ((state->config->if_freq == TDA10046_FREQ_045) ||
 268            (state->config->if_freq == TDA10046_FREQ_052))
 269                tda10046_clk53m = 0;
 270        else
 271                tda10046_clk53m = 1;
 272        switch (bandwidth) {
 273        case BANDWIDTH_6_MHZ:
 274                if (tda10046_clk53m)
 275                        tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_53M,
 276                                                  sizeof(bandwidth_6mhz_53M));
 277                else
 278                        tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz_48M,
 279                                                  sizeof(bandwidth_6mhz_48M));
 280                if (state->config->if_freq == TDA10046_FREQ_045) {
 281                        tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a);
 282                        tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xab);
 283                }
 284                break;
 285
 286        case BANDWIDTH_7_MHZ:
 287                if (tda10046_clk53m)
 288                        tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_53M,
 289                                                  sizeof(bandwidth_7mhz_53M));
 290                else
 291                        tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz_48M,
 292                                                  sizeof(bandwidth_7mhz_48M));
 293                if (state->config->if_freq == TDA10046_FREQ_045) {
 294                        tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
 295                        tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
 296                }
 297                break;
 298
 299        case BANDWIDTH_8_MHZ:
 300                if (tda10046_clk53m)
 301                        tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_53M,
 302                                                  sizeof(bandwidth_8mhz_53M));
 303                else
 304                        tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz_48M,
 305                                                  sizeof(bandwidth_8mhz_48M));
 306                if (state->config->if_freq == TDA10046_FREQ_045) {
 307                        tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
 308                        tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x55);
 309                }
 310                break;
 311
 312        default:
 313                return -EINVAL;
 314        }
 315
 316        return 0;
 317}
 318
 319static int tda1004x_do_upload(struct tda1004x_state *state,
 320                              unsigned char *mem, unsigned int len,
 321                              u8 dspCodeCounterReg, u8 dspCodeInReg)
 322{
 323        u8 buf[65];
 324        struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 };
 325        int tx_size;
 326        int pos = 0;
 327
 328        /* clear code counter */
 329        tda1004x_write_byteI(state, dspCodeCounterReg, 0);
 330        fw_msg.addr = state->config->demod_address;
 331
 332        buf[0] = dspCodeInReg;
 333        while (pos != len) {
 334                // work out how much to send this time
 335                tx_size = len - pos;
 336                if (tx_size > 0x10)
 337                        tx_size = 0x10;
 338
 339                // send the chunk
 340                memcpy(buf + 1, mem + pos, tx_size);
 341                fw_msg.len = tx_size + 1;
 342                if (i2c_transfer(state->i2c, &fw_msg, 1) != 1) {
 343                        printk(KERN_ERR "tda1004x: Error during firmware upload\n");
 344                        return -EIO;
 345                }
 346                pos += tx_size;
 347
 348                dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos);
 349        }
 350        // give the DSP a chance to settle 03/10/05 Hac
 351        msleep(100);
 352
 353        return 0;
 354}
 355
 356static int tda1004x_check_upload_ok(struct tda1004x_state *state)
 357{
 358        u8 data1, data2;
 359        unsigned long timeout;
 360
 361        if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
 362                timeout = jiffies + 2 * HZ;
 363                while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) {
 364                        if (time_after(jiffies, timeout)) {
 365                                printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
 366                                break;
 367                        }
 368                        msleep(1);
 369                }
 370        } else
 371                msleep(100);
 372
 373        // check upload was OK
 374        tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP
 375        tda1004x_write_byteI(state, TDA1004X_DSP_CMD, 0x67);
 376
 377        data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1);
 378        data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2);
 379        if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) {
 380                printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
 381                return -EIO;
 382        }
 383        printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
 384        return 0;
 385}
 386
 387static int tda10045_fwupload(struct dvb_frontend* fe)
 388{
 389        struct tda1004x_state* state = fe->demodulator_priv;
 390        int ret;
 391        const struct firmware *fw;
 392
 393        /* don't re-upload unless necessary */
 394        if (tda1004x_check_upload_ok(state) == 0)
 395                return 0;
 396
 397        /* request the firmware, this will block until someone uploads it */
 398        printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
 399        ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
 400        if (ret) {
 401                printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
 402                return ret;
 403        }
 404
 405        /* reset chip */
 406        tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0);
 407        tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
 408        tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
 409        msleep(10);
 410
 411        /* set parameters */
 412        tda10045h_set_bandwidth(state, BANDWIDTH_8_MHZ);
 413
 414        ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN);
 415        release_firmware(fw);
 416        if (ret)
 417                return ret;
 418        printk(KERN_INFO "tda1004x: firmware upload complete\n");
 419
 420        /* wait for DSP to initialise */
 421        /* DSPREADY doesn't seem to work on the TDA10045H */
 422        msleep(100);
 423
 424        return tda1004x_check_upload_ok(state);
 425}
 426
 427static void tda10046_init_plls(struct dvb_frontend* fe)
 428{
 429        struct tda1004x_state* state = fe->demodulator_priv;
 430        int tda10046_clk53m;
 431
 432        if ((state->config->if_freq == TDA10046_FREQ_045) ||
 433            (state->config->if_freq == TDA10046_FREQ_052))
 434                tda10046_clk53m = 0;
 435        else
 436                tda10046_clk53m = 1;
 437
 438        tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0);
 439        if(tda10046_clk53m) {
 440                printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
 441                tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x08); // PLL M = 8
 442        } else {
 443                printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
 444                tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 0x03); // PLL M = 3
 445        }
 446        if (state->config->xtal_freq == TDA10046_XTAL_4M ) {
 447                dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__);
 448                tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0
 449        } else {
 450                dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __FUNCTION__);
 451                tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3
 452        }
 453        if(tda10046_clk53m)
 454                tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x67);
 455        else
 456                tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 0x72);
 457        /* Note clock frequency is handled implicitly */
 458        switch (state->config->if_freq) {
 459        case TDA10046_FREQ_045:
 460                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c);
 461                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00);
 462                break;
 463        case TDA10046_FREQ_052:
 464                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0d);
 465                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xc7);
 466                break;
 467        case TDA10046_FREQ_3617:
 468                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
 469                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x59);
 470                break;
 471        case TDA10046_FREQ_3613:
 472                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd7);
 473                tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x3f);
 474                break;
 475        }
 476        tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz
 477        /* let the PLLs settle */
 478        msleep(120);
 479}
 480
 481static int tda10046_fwupload(struct dvb_frontend* fe)
 482{
 483        struct tda1004x_state* state = fe->demodulator_priv;
 484        int ret;
 485        const struct firmware *fw;
 486
 487        /* reset + wake up chip */
 488        if (state->config->xtal_freq == TDA10046_XTAL_4M) {
 489                tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
 490        } else {
 491                dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __FUNCTION__);
 492                tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80);
 493        }
 494        tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
 495        /* set GPIO 1 and 3 */
 496        if (state->config->gpio_config != TDA10046_GPTRI) {
 497                tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33);
 498                tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f);
 499        }
 500        /* let the clocks recover from sleep */
 501        msleep(10);
 502
 503        /* The PLLs need to be reprogrammed after sleep */
 504        tda10046_init_plls(fe);
 505        tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0);
 506
 507        /* don't re-upload unless necessary */
 508        if (tda1004x_check_upload_ok(state) == 0)
 509                return 0;
 510
 511        printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
 512        tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4);
 513        msleep(300);
 514        /* don't re-upload unless necessary */
 515        if (tda1004x_check_upload_ok(state) == 0)
 516                return 0;
 517
 518        if (state->config->request_firmware != NULL) {
 519                /* request the firmware, this will block until someone uploads it */
 520                printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
 521                ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE);
 522                if (ret) {
 523                        /* remain compatible to old bug: try to load with tda10045 image name */
 524                        ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE);
 525                        if (ret) {
 526                                printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
 527                                return ret;
 528                        } else {
 529                                printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
 530                                                  TDA10046_DEFAULT_FIRMWARE);
 531                        }
 532                }
 533        } else {
 534                printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");
 535                return -EIO;
 536        }
 537        tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST
 538        ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN);
 539        release_firmware(fw);
 540        return tda1004x_check_upload_ok(state);
 541}
 542
 543static int tda1004x_encode_fec(int fec)
 544{
 545        // convert known FEC values
 546        switch (fec) {
 547        case FEC_1_2:
 548                return 0;
 549        case FEC_2_3:
 550                return 1;
 551        case FEC_3_4:
 552                return 2;
 553        case FEC_5_6:
 554                return 3;
 555        case FEC_7_8:
 556                return 4;
 557        }
 558
 559        // unsupported
 560        return -EINVAL;
 561}
 562
 563static int tda1004x_decode_fec(int tdafec)
 564{
 565        // convert known FEC values
 566        switch (tdafec) {
 567        case 0:
 568                return FEC_1_2;
 569        case 1:
 570                return FEC_2_3;
 571        case 2:
 572                return FEC_3_4;
 573        case 3:
 574                return FEC_5_6;
 575        case 4:
 576                return FEC_7_8;
 577        }
 578
 579        // unsupported
 580        return -1;
 581}
 582
 583static int tda1004x_write(struct dvb_frontend* fe, u8 *buf, int len)
 584{
 585        struct tda1004x_state* state = fe->demodulator_priv;
 586
 587        if (len != 2)
 588                return -EINVAL;
 589
 590        return tda1004x_write_byteI(state, buf[0], buf[1]);
 591}
 592
 593static int tda10045_init(struct dvb_frontend* fe)
 594{
 595        struct tda1004x_state* state = fe->demodulator_priv;
 596
 597        dprintk("%s\n", __FUNCTION__);
 598
 599        if (tda10045_fwupload(fe)) {
 600                printk("tda1004x: firmware upload failed\n");
 601                return -EIO;
 602        }
 603
 604        tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0); // wake up the ADC
 605
 606        // tda setup
 607        tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
 608        tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream
 609        tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0); // set polarity of VAGC signal
 610        tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0x80); // enable pulse killer
 611        tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10); // enable auto offset
 612        tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0x0); // no frequency offset
 613        tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 0); // setup MPEG2 TS interface
 614        tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0); // setup MPEG2 TS interface
 615        tda1004x_write_mask(state, TDA1004X_VBER_MSB, 0xe0, 0xa0); // 10^6 VBER measurement bits
 616        tda1004x_write_mask(state, TDA1004X_CONFC1, 0x10, 0); // VAGC polarity
 617        tda1004x_write_byteI(state, TDA1004X_CONFADC1, 0x2e);
 618
 619        tda1004x_write_mask(state, 0x1f, 0x01, state->config->invert_oclk);
 620
 621        return 0;
 622}
 623
 624static int tda10046_init(struct dvb_frontend* fe)
 625{
 626        struct tda1004x_state* state = fe->demodulator_priv;
 627        dprintk("%s\n", __FUNCTION__);
 628
 629        if (tda10046_fwupload(fe)) {
 630                printk("tda1004x: firmware upload failed\n");
 631                        return -EIO;
 632        }
 633
 634        // tda setup
 635        tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
 636        tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87);    // 100 ppm crystal, select HP stream
 637        tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88);      // enable pulse killer
 638
 639        switch (state->config->agc_config) {
 640        case TDA10046_AGC_DEFAULT:
 641                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup
 642                tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
 643                break;
 644        case TDA10046_AGC_IFO_AUTO_NEG:
 645                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
 646                tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
 647                break;
 648        case TDA10046_AGC_IFO_AUTO_POS:
 649                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
 650                tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00);  // set AGC polarities
 651                break;
 652        case TDA10046_AGC_TDA827X:
 653                tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
 654                tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
 655                tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 656                tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60);  // set AGC polarities
 657                break;
 658        }
 659        if (state->config->ts_mode == 0) {
 660                tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x40);
 661                tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
 662        } else {
 663                tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0xc0, 0x80);
 664                tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x10,
 665                                                        state->config->invert_oclk << 4);
 666        }
 667        tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
 668        tda1004x_write_mask (state, TDA10046H_CONF_TRISTATE1, 0x3e, 0x38); // Turn IF AGC output on
 669        tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0);    // }
 670        tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values
 671        tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0);     // }
 672        tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff);  // }
 673        tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 0x12); // IF gain 2, TUN gain 1
 674        tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
 675        tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
 676        tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
 677        // tda1004x_write_mask(state, 0x50, 0x80, 0x80);         // handle out of guard echoes
 678
 679        return 0;
 680}
 681
 682static int tda1004x_set_fe(struct dvb_frontend* fe,
 683                           struct dvb_frontend_parameters *fe_params)
 684{
 685        struct tda1004x_state* state = fe->demodulator_priv;
 686        int tmp;
 687        int inversion;
 688
 689        dprintk("%s\n", __FUNCTION__);
 690
 691        if (state->demod_type == TDA1004X_DEMOD_TDA10046) {
 692                // setup auto offset
 693                tda1004x_write_mask(state, TDA1004X_AUTO, 0x10, 0x10);
 694                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x80, 0);
 695                tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0xC0, 0);
 696
 697                // disable agc_conf[2]
 698                tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 0);
 699        }
 700
 701        // set frequency
 702        if (fe->ops.tuner_ops.set_params) {
 703                fe->ops.tuner_ops.set_params(fe, fe_params);
 704                if (fe->ops.i2c_gate_ctrl)
 705                        fe->ops.i2c_gate_ctrl(fe, 0);
 706        }
 707
 708        // Hardcoded to use auto as much as possible on the TDA10045 as it
 709        // is very unreliable if AUTO mode is _not_ used.
 710        if (state->demod_type == TDA1004X_DEMOD_TDA10045) {
 711                fe_params->u.ofdm.code_rate_HP = FEC_AUTO;
 712                fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
 713                fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
 714        }
 715
 716        // Set standard params.. or put them to auto
 717        if ((fe_params->u.ofdm.code_rate_HP == FEC_AUTO) ||
 718                (fe_params->u.ofdm.code_rate_LP == FEC_AUTO) ||
 719                (fe_params->u.ofdm.constellation == QAM_AUTO) ||
 720                (fe_params->u.ofdm.hierarchy_information == HIERARCHY_AUTO)) {
 721                tda1004x_write_mask(state, TDA1004X_AUTO, 1, 1);        // enable auto
 722                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x03, 0); // turn off constellation bits
 723                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0); // turn off hierarchy bits
 724                tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x3f, 0); // turn off FEC bits
 725        } else {
 726                tda1004x_write_mask(state, TDA1004X_AUTO, 1, 0);        // disable auto
 727
 728                // set HP FEC
 729                tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_HP);
 730                if (tmp < 0)
 731                        return tmp;
 732                tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp);
 733
 734                // set LP FEC
 735                tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_LP);
 736                if (tmp < 0)
 737                        return tmp;
 738                tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3);
 739
 740                // set constellation
 741                switch (fe_params->u.ofdm.constellation) {
 742                case QPSK:
 743                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 0);
 744                        break;
 745
 746                case QAM_16:
 747                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 1);
 748                        break;
 749
 750                case QAM_64:
 751                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 3, 2);
 752                        break;
 753
 754                default:
 755                        return -EINVAL;
 756                }
 757
 758                // set hierarchy
 759                switch (fe_params->u.ofdm.hierarchy_information) {
 760                case HIERARCHY_NONE:
 761                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 0 << 5);
 762                        break;
 763
 764                case HIERARCHY_1:
 765                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 1 << 5);
 766                        break;
 767
 768                case HIERARCHY_2:
 769                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 2 << 5);
 770                        break;
 771
 772                case HIERARCHY_4:
 773                        tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x60, 3 << 5);
 774                        break;
 775
 776                default:
 777                        return -EINVAL;
 778                }
 779        }
 780
 781        // set bandwidth
 782        switch (state->demod_type) {
 783        case TDA1004X_DEMOD_TDA10045:
 784                tda10045h_set_bandwidth(state, fe_params->u.ofdm.bandwidth);
 785                break;
 786
 787        case TDA1004X_DEMOD_TDA10046:
 788                tda10046h_set_bandwidth(state, fe_params->u.ofdm.bandwidth);
 789                break;
 790        }
 791
 792        // set inversion
 793        inversion = fe_params->inversion;
 794        if (state->config->invert)
 795                inversion = inversion ? INVERSION_OFF : INVERSION_ON;
 796        switch (inversion) {
 797        case INVERSION_OFF:
 798                tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0);
 799                break;
 800
 801        case INVERSION_ON:
 802                tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0x20);
 803                break;
 804
 805        default:
 806                return -EINVAL;
 807        }
 808
 809        // set guard interval
 810        switch (fe_params->u.ofdm.guard_interval) {
 811        case GUARD_INTERVAL_1_32:
 812                tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 813                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
 814                break;
 815
 816        case GUARD_INTERVAL_1_16:
 817                tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 818                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 1 << 2);
 819                break;
 820
 821        case GUARD_INTERVAL_1_8:
 822                tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 823                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 2 << 2);
 824                break;
 825
 826        case GUARD_INTERVAL_1_4:
 827                tda1004x_write_mask(state, TDA1004X_AUTO, 2, 0);
 828                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 3 << 2);
 829                break;
 830
 831        case GUARD_INTERVAL_AUTO:
 832                tda1004x_write_mask(state, TDA1004X_AUTO, 2, 2);
 833                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x0c, 0 << 2);
 834                break;
 835
 836        default:
 837                return -EINVAL;
 838        }
 839
 840        // set transmission mode
 841        switch (fe_params->u.ofdm.transmission_mode) {
 842        case TRANSMISSION_MODE_2K:
 843                tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
 844                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0 << 4);
 845                break;
 846
 847        case TRANSMISSION_MODE_8K:
 848                tda1004x_write_mask(state, TDA1004X_AUTO, 4, 0);
 849                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 1 << 4);
 850                break;
 851
 852        case TRANSMISSION_MODE_AUTO:
 853                tda1004x_write_mask(state, TDA1004X_AUTO, 4, 4);
 854                tda1004x_write_mask(state, TDA1004X_IN_CONF1, 0x10, 0);
 855                break;
 856
 857        default:
 858                return -EINVAL;
 859        }
 860
 861        // start the lock
 862        switch (state->demod_type) {
 863        case TDA1004X_DEMOD_TDA10045:
 864                tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8);
 865                tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0);
 866                break;
 867
 868        case TDA1004X_DEMOD_TDA10046:
 869                tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40);
 870                msleep(1);
 871                tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 1);
 872                break;
 873        }
 874
 875        msleep(10);
 876
 877        return 0;
 878}
 879
 880static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_parameters *fe_params)
 881{
 882        struct tda1004x_state* state = fe->demodulator_priv;
 883
 884        dprintk("%s\n", __FUNCTION__);
 885
 886        // inversion status
 887        fe_params->inversion = INVERSION_OFF;
 888        if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20)
 889                fe_params->inversion = INVERSION_ON;
 890        if (state->config->invert)
 891                fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON;
 892
 893        // bandwidth
 894        switch (state->demod_type) {
 895        case TDA1004X_DEMOD_TDA10045:
 896                switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) {
 897                case 0x14:
 898                        fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
 899                        break;
 900                case 0xdb:
 901                        fe_params->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
 902                        break;
 903                case 0x4f:
 904                        fe_params->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
 905                        break;
 906                }
 907                break;
 908        case TDA1004X_DEMOD_TDA10046:
 909                switch (tda1004x_read_byte(state, TDA10046H_TIME_WREF1)) {
 910                case 0x5c:
 911                case 0x54:
 912                        fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
 913                        break;
 914                case 0x6a:
 915                case 0x60:
 916                        fe_params->u.ofdm.bandwidth = BANDWIDTH_7_MHZ;
 917                        break;
 918                case 0x7b:
 919                case 0x70:
 920                        fe_params->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
 921                        break;
 922                }
 923                break;
 924        }
 925
 926        // FEC
 927        fe_params->u.ofdm.code_rate_HP =
 928            tda1004x_decode_fec(tda1004x_read_byte(state, TDA1004X_OUT_CONF2) & 7);
 929        fe_params->u.ofdm.code_rate_LP =
 930            tda1004x_decode_fec((tda1004x_read_byte(state, TDA1004X_OUT_CONF2) >> 3) & 7);
 931
 932        // constellation
 933        switch (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 3) {
 934        case 0:
 935                fe_params->u.ofdm.constellation = QPSK;
 936                break;
 937        case 1:
 938                fe_params->u.ofdm.constellation = QAM_16;
 939                break;
 940        case 2:
 941                fe_params->u.ofdm.constellation = QAM_64;
 942                break;
 943        }
 944
 945        // transmission mode
 946        fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K;
 947        if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10)
 948                fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K;
 949
 950        // guard interval
 951        switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) {
 952        case 0:
 953                fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_1_32;
 954                break;
 955        case 1:
 956                fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_1_16;
 957                break;
 958        case 2:
 959                fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_1_8;
 960                break;
 961        case 3:
 962                fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_1_4;
 963                break;
 964        }
 965
 966        // hierarchy
 967        switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x60) >> 5) {
 968        case 0:
 969                fe_params->u.ofdm.hierarchy_information = HIERARCHY_NONE;
 970                break;
 971        case 1:
 972                fe_params->u.ofdm.hierarchy_information = HIERARCHY_1;
 973                break;
 974        case 2:
 975                fe_params->u.ofdm.hierarchy_information = HIERARCHY_2;
 976                break;
 977        case 3:
 978                fe_params->u.ofdm.hierarchy_information = HIERARCHY_4;
 979                break;
 980        }
 981
 982        return 0;
 983}
 984
 985static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status)
 986{
 987        struct tda1004x_state* state = fe->demodulator_priv;
 988        int status;
 989        int cber;
 990        int vber;
 991
 992        dprintk("%s\n", __FUNCTION__);
 993
 994        // read status
 995        status = tda1004x_read_byte(state, TDA1004X_STATUS_CD);
 996        if (status == -1)
 997                return -EIO;
 998
 999        // decode
1000        *fe_status = 0;
1001        if (status & 4)
1002                *fe_status |= FE_HAS_SIGNAL;
1003        if (status & 2)
1004                *fe_status |= FE_HAS_CARRIER;
1005        if (status & 8)
1006                *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
1007
1008        // if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi
1009        // is getting anything valid
1010        if (!(*fe_status & FE_HAS_VITERBI)) {
1011                // read the CBER
1012                cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
1013                if (cber == -1)
1014                        return -EIO;
1015                status = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
1016                if (status == -1)
1017                        return -EIO;
1018                cber |= (status << 8);
1019                // The address 0x20 should be read to cope with a TDA10046 bug
1020                tda1004x_read_byte(state, TDA1004X_CBER_RESET);
1021
1022                if (cber != 65535)
1023                        *fe_status |= FE_HAS_VITERBI;
1024        }
1025
1026        // if we DO have some valid VITERBI output, but don't already have SYNC
1027        // bytes (i.e. not LOCKED), see if the RS decoder is getting anything valid.
1028        if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) {
1029                // read the VBER
1030                vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB);
1031                if (vber == -1)
1032                        return -EIO;
1033                status = tda1004x_read_byte(state, TDA1004X_VBER_MID);
1034                if (status == -1)
1035                        return -EIO;
1036                vber |= (status << 8);
1037                status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
1038                if (status == -1)
1039                        return -EIO;
1040                vber |= (status & 0x0f) << 16;
1041                // The CVBER_LUT should be read to cope with TDA10046 hardware bug
1042                tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
1043
1044                // if RS has passed some valid TS packets, then we must be
1045                // getting some SYNC bytes
1046                if (vber < 16632)
1047                        *fe_status |= FE_HAS_SYNC;
1048        }
1049
1050        // success
1051        dprintk("%s: fe_status=0x%x\n", __FUNCTION__, *fe_status);
1052        return 0;
1053}
1054
1055static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal)
1056{
1057        struct tda1004x_state* state = fe->demodulator_priv;
1058        int tmp;
1059        int reg = 0;
1060
1061        dprintk("%s\n", __FUNCTION__);
1062
1063        // determine the register to use
1064        switch (state->demod_type) {
1065        case TDA1004X_DEMOD_TDA10045:
1066                reg = TDA10045H_S_AGC;
1067                break;
1068
1069        case TDA1004X_DEMOD_TDA10046:
1070                reg = TDA10046H_AGC_IF_LEVEL;
1071                break;
1072        }
1073
1074        // read it
1075        tmp = tda1004x_read_byte(state, reg);
1076        if (tmp < 0)
1077                return -EIO;
1078
1079        *signal = (tmp << 8) | tmp;
1080        dprintk("%s: signal=0x%x\n", __FUNCTION__, *signal);
1081        return 0;
1082}
1083
1084static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr)
1085{
1086        struct tda1004x_state* state = fe->demodulator_priv;
1087        int tmp;
1088
1089        dprintk("%s\n", __FUNCTION__);
1090
1091        // read it
1092        tmp = tda1004x_read_byte(state, TDA1004X_SNR);
1093        if (tmp < 0)
1094                return -EIO;
1095        tmp = 255 - tmp;
1096
1097        *snr = ((tmp << 8) | tmp);
1098        dprintk("%s: snr=0x%x\n", __FUNCTION__, *snr);
1099        return 0;
1100}
1101
1102static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
1103{
1104        struct tda1004x_state* state = fe->demodulator_priv;
1105        int tmp;
1106        int tmp2;
1107        int counter;
1108
1109        dprintk("%s\n", __FUNCTION__);
1110
1111        // read the UCBLOCKS and reset
1112        counter = 0;
1113        tmp = tda1004x_read_byte(state, TDA1004X_UNCOR);
1114        if (tmp < 0)
1115                return -EIO;
1116        tmp &= 0x7f;
1117        while (counter++ < 5) {
1118                tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
1119                tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
1120                tda1004x_write_mask(state, TDA1004X_UNCOR, 0x80, 0);
1121
1122                tmp2 = tda1004x_read_byte(state, TDA1004X_UNCOR);
1123                if (tmp2 < 0)
1124                        return -EIO;
1125                tmp2 &= 0x7f;
1126                if ((tmp2 < tmp) || (tmp2 == 0))
1127                        break;
1128        }
1129
1130        if (tmp != 0x7f)
1131                *ucblocks = tmp;
1132        else
1133                *ucblocks = 0xffffffff;
1134
1135        dprintk("%s: ucblocks=0x%x\n", __FUNCTION__, *ucblocks);
1136        return 0;
1137}
1138
1139static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
1140{
1141        struct tda1004x_state* state = fe->demodulator_priv;
1142        int tmp;
1143
1144        dprintk("%s\n", __FUNCTION__);
1145
1146        // read it in
1147        tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB);
1148        if (tmp < 0)
1149                return -EIO;
1150        *ber = tmp << 1;
1151        tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB);
1152        if (tmp < 0)
1153                return -EIO;
1154        *ber |= (tmp << 9);
1155        // The address 0x20 should be read to cope with a TDA10046 bug
1156        tda1004x_read_byte(state, TDA1004X_CBER_RESET);
1157
1158        dprintk("%s: ber=0x%x\n", __FUNCTION__, *ber);
1159        return 0;
1160}
1161
1162static int tda1004x_sleep(struct dvb_frontend* fe)
1163{
1164        struct tda1004x_state* state = fe->demodulator_priv;
1165        int gpio_conf;
1166
1167        switch (state->demod_type) {
1168        case TDA1004X_DEMOD_TDA10045:
1169                tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10);
1170                break;
1171
1172        case TDA1004X_DEMOD_TDA10046:
1173                /* set outputs to tristate */
1174                tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
1175                /* invert GPIO 1 and 3 if desired*/
1176                gpio_conf = state->config->gpio_config;
1177                if (gpio_conf >= TDA10046_GP00_I)
1178                        tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f,
1179                                                        (gpio_conf & 0x0f) ^ 0x0a);
1180
1181                tda1004x_write_mask(state, TDA1004X_CONFADC2, 0xc0, 0xc0);
1182                tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
1183                break;
1184        }
1185
1186        return 0;
1187}
1188
1189static int tda1004x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
1190{
1191        struct tda1004x_state* state = fe->demodulator_priv;
1192
1193        if (enable) {
1194                return tda1004x_enable_tuner_i2c(state);
1195        } else {
1196                return tda1004x_disable_tuner_i2c(state);
1197        }
1198}
1199
1200static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
1201{
1202        fesettings->min_delay_ms = 800;
1203        /* Drift compensation makes no sense for DVB-T */
1204        fesettings->step_size = 0;
1205        fesettings->max_drift = 0;
1206        return 0;
1207}
1208
1209static void tda1004x_release(struct dvb_frontend* fe)
1210{
1211        struct tda1004x_state *state = fe->demodulator_priv;
1212        kfree(state);
1213}
1214
1215static struct dvb_frontend_ops tda10045_ops = {
1216        .info = {
1217                .name = "Philips TDA10045H DVB-T",
1218                .type = FE_OFDM,
1219                .frequency_min = 51000000,
1220                .frequency_max = 858000000,
1221                .frequency_stepsize = 166667,
1222                .caps =
1223                    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
1224                    FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
1225                    FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
1226                    FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
1227        },
1228
1229        .release = tda1004x_release,
1230
1231        .init = tda10045_init,
1232        .sleep = tda1004x_sleep,
1233        .write = tda1004x_write,
1234        .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
1235
1236        .set_frontend = tda1004x_set_fe,
1237        .get_frontend = tda1004x_get_fe,
1238        .get_tune_settings = tda1004x_get_tune_settings,
1239
1240        .read_status = tda1004x_read_status,
1241        .read_ber = tda1004x_read_ber,
1242        .read_signal_strength = tda1004x_read_signal_strength,
1243        .read_snr = tda1004x_read_snr,
1244        .read_ucblocks = tda1004x_read_ucblocks,
1245};
1246
1247struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
1248                                     struct i2c_adapter* i2c)
1249{
1250        struct tda1004x_state *state;
1251
1252        /* allocate memory for the internal state */
1253        state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
1254        if (!state)
1255                return NULL;
1256
1257        /* setup the state */
1258        state->config = config;
1259        state->i2c = i2c;
1260        state->demod_type = TDA1004X_DEMOD_TDA10045;
1261
1262        /* check if the demod is there */
1263        if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) {
1264                kfree(state);
1265                return NULL;
1266        }
1267
1268        /* create dvb_frontend */
1269        memcpy(&state->frontend.ops, &tda10045_ops, sizeof(struct dvb_frontend_ops));
1270        state->frontend.demodulator_priv = state;
1271        return &state->frontend;
1272}
1273
1274static struct dvb_frontend_ops tda10046_ops = {
1275        .info = {
1276                .name = "Philips TDA10046H DVB-T",
1277                .type = FE_OFDM,
1278                .frequency_min = 51000000,
1279                .frequency_max = 858000000,
1280                .frequency_stepsize = 166667,
1281                .caps =
1282                    FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
1283                    FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
1284                    FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
1285                    FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO
1286        },
1287
1288        .release = tda1004x_release,
1289
1290        .init = tda10046_init,
1291        .sleep = tda1004x_sleep,
1292        .write = tda1004x_write,
1293        .i2c_gate_ctrl = tda1004x_i2c_gate_ctrl,
1294
1295        .set_frontend = tda1004x_set_fe,
1296        .get_frontend = tda1004x_get_fe,
1297        .get_tune_settings = tda1004x_get_tune_settings,
1298
1299        .read_status = tda1004x_read_status,
1300        .read_ber = tda1004x_read_ber,
1301        .read_signal_strength = tda1004x_read_signal_strength,
1302        .read_snr = tda1004x_read_snr,
1303        .read_ucblocks = tda1004x_read_ucblocks,
1304};
1305
1306struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
1307                                     struct i2c_adapter* i2c)
1308{
1309        struct tda1004x_state *state;
1310
1311        /* allocate memory for the internal state */
1312        state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL);
1313        if (!state)
1314                return NULL;
1315
1316        /* setup the state */
1317        state->config = config;
1318        state->i2c = i2c;
1319        state->demod_type = TDA1004X_DEMOD_TDA10046;
1320
1321        /* check if the demod is there */
1322        if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) {
1323                kfree(state);
1324                return NULL;
1325        }
1326
1327        /* create dvb_frontend */
1328        memcpy(&state->frontend.ops, &tda10046_ops, sizeof(struct dvb_frontend_ops));
1329        state->frontend.demodulator_priv = state;
1330        return &state->frontend;
1331}
1332
1333module_param(debug, int, 0644);
1334MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
1335
1336MODULE_DESCRIPTION("Philips TDA10045H & TDA10046H DVB-T Demodulator");
1337MODULE_AUTHOR("Andrew de Quincey & Robert Schlabbach");
1338MODULE_LICENSE("GPL");
1339
1340EXPORT_SYMBOL(tda10045_attach);
1341EXPORT_SYMBOL(tda10046_attach);
1342
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.