/* $Id: setup.c,v 1.30 2003/10/13 07:21:19 lethal Exp $
 *
 *  linux/arch/sh/kernel/setup.c
 *
 *  Copyright (C) 1999  Niibe Yutaka
 *  Copyright (C) 2002, 2003  Paul Mundt
 */

/*
 * This file handles the architecture-dependent parts of initialization
 */

#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/utsname.h>
#include <linux/cpu.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/io_generic.h>
#include <asm/sections.h>
#include <asm/irq.h>
#include <asm/setup.h>

#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
static int kgdb_parse_options(char *options);
#endif
extern void * __rd_start, * __rd_end;
/*
 * Machine setup..
 */

/*
 * Initialize loops_per_jiffy as 10000000 (1000MIPS).
 * This value will be used at the very early stage of serial setup.
 * The bigger value means no problem.
 */
struct sh_cpuinfo boot_cpu_data = { CPU_SH_NONE, 0, 10000000, };
struct screen_info screen_info;

#if defined(CONFIG_SH_UNKNOWN)
struct sh_machine_vector sh_mv;
#endif

/* We need this to satisfy some external references. */
struct screen_info screen_info = {
        0, 25,                  /* orig-x, orig-y */
        0,                      /* unused */
        0,                      /* orig-video-page */
        0,                      /* orig-video-mode */
        80,                     /* orig-video-cols */
        0,0,0,                  /* ega_ax, ega_bx, ega_cx */
        25,                     /* orig-video-lines */
        0,                      /* orig-video-isVGA */
        16                      /* orig-video-points */
};

extern void platform_setup(void);
extern char *get_system_type(void);
extern int root_mountflags;

#define MV_NAME_SIZE 32

static struct sh_machine_vector* __init get_mv_byname(const char* name);

/*
 * This is set up by the setup-routine at boot-time
 */
#define PARAM   ((unsigned char *)empty_zero_page)

#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
#define INITRD_START (*(unsigned long *) (PARAM+0x010))
#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
/* ... */
#define COMMAND_LINE ((char *) (PARAM+0x100))

#define RAMDISK_IMAGE_START_MASK        0x07FF
#define RAMDISK_PROMPT_FLAG             0x8000
#define RAMDISK_LOAD_FLAG               0x4000  

static char command_line[COMMAND_LINE_SIZE] = { 0, };

struct resource standard_io_resources[] = {
        { "dma1", 0x00, 0x1f },
        { "pic1", 0x20, 0x3f },
        { "timer", 0x40, 0x5f },
        { "keyboard", 0x60, 0x6f },
        { "dma page reg", 0x80, 0x8f },
        { "pic2", 0xa0, 0xbf },
        { "dma2", 0xc0, 0xdf },
        { "fpu", 0xf0, 0xff }
};

#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource))

/* System RAM - interrupted by the 640kB-1M hole */
#define code_resource (ram_resources[3])
#define data_resource (ram_resources[4])
static struct resource ram_resources[] = {
        { "System RAM", 0x000000, 0x09ffff, IORESOURCE_BUSY },
        { "System RAM", 0x100000, 0x100000, IORESOURCE_BUSY },
        { "Video RAM area", 0x0a0000, 0x0bffff },
        { "Kernel code", 0x100000, 0 },
        { "Kernel data", 0, 0 }
};

unsigned long memory_start, memory_end;

static inline void parse_cmdline (char ** cmdline_p, char mv_name[MV_NAME_SIZE],
                                  struct sh_machine_vector** mvp,
                                  unsigned long *mv_io_base,
                                  int *mv_mmio_enable)
{
        char c = ' ', *to = command_line, *from = COMMAND_LINE;
        int len = 0;

        /* Save unparsed command line copy for /proc/cmdline */
        memcpy(saved_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
        saved_command_line[COMMAND_LINE_SIZE-1] = '\0';

        memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START;
        memory_end = memory_start + __MEMORY_SIZE;

        for (;;) {
                /*
                 * "mem=XXX[kKmM]" defines a size of memory.
                 */
                if (c == ' ' && !memcmp(from, "mem=", 4)) {
                        if (to != command_line)
                                to--;
                        {
                                unsigned long mem_size;

                                mem_size = memparse(from+4, &from);
                                memory_end = memory_start + mem_size;
                        }
                }
                if (c == ' ' && !memcmp(from, "sh_mv=", 6)) {
                        char* mv_end;
                        char* mv_comma;
                        int mv_len;
                        if (to != command_line)
                                to--;
                        from += 6;
                        mv_end = strchr(from, ' ');
                        if (mv_end == NULL)
                                mv_end = from + strlen(from);

                        mv_comma = strchr(from, ',');
                        if ((mv_comma != NULL) && (mv_comma < mv_end)) {
                                int ints[3];
                                get_options(mv_comma+1, ARRAY_SIZE(ints), ints);
                                *mv_io_base = ints[1];
                                *mv_mmio_enable = ints[2];
                                mv_len = mv_comma - from;
                        } else {
                                mv_len = mv_end - from;
                        }
                        if (mv_len > (MV_NAME_SIZE-1))
                                mv_len = MV_NAME_SIZE-1;
                        memcpy(mv_name, from, mv_len);
                        mv_name[mv_len] = '\0';
                        from = mv_end;

                        *mvp = get_mv_byname(mv_name);
                }
                c = *(from++);
                if (!c)
                        break;
                if (COMMAND_LINE_SIZE <= ++len)
                        break;
                *(to++) = c;
        }
        *to = '\0';
        *cmdline_p = command_line;
}

static int __init sh_mv_setup(char **cmdline_p)
{
#if defined(CONFIG_SH_UNKNOWN)
        extern struct sh_machine_vector mv_unknown;
#endif
        struct sh_machine_vector *mv = NULL;
        char mv_name[MV_NAME_SIZE] = "";
        unsigned long mv_io_base = 0;
        int mv_mmio_enable = 0;

        parse_cmdline(cmdline_p, mv_name, &mv, &mv_io_base, &mv_mmio_enable);

#ifdef CONFIG_SH_GENERIC
        if (mv == NULL) {
                mv = &mv_unknown;
                if (*mv_name != '\0') {
                        printk("Warning: Unsupported machine %s, using unknown\n",
                               mv_name);
                }
        }
        sh_mv = *mv;
#endif
#ifdef CONFIG_SH_UNKNOWN
        sh_mv = mv_unknown;
#endif

        /*
         * Manually walk the vec, fill in anything that the board hasn't yet
         * by hand, wrapping to the generic implementation.
         */
#define mv_set(elem) do { \
        if (!sh_mv.mv_##elem) \
                sh_mv.mv_##elem = generic_##elem; \
} while (0)

        mv_set(inb);    mv_set(inw);    mv_set(inl);
        mv_set(outb);   mv_set(outw);   mv_set(outl);

        mv_set(inb_p);  mv_set(inw_p);  mv_set(inl_p);
        mv_set(outb_p); mv_set(outw_p); mv_set(outl_p);

        mv_set(insb);   mv_set(insw);   mv_set(insl);
        mv_set(outsb);  mv_set(outsw);  mv_set(outsl);

        mv_set(readb);  mv_set(readw);  mv_set(readl);
        mv_set(writeb); mv_set(writew); mv_set(writel);

        mv_set(ioremap);
        mv_set(iounmap);

        mv_set(isa_port2addr);
        mv_set(irq_demux);

#ifdef CONFIG_SH_UNKNOWN
        __set_io_port_base(mv_io_base);
#endif

        return 0;
}

void __init setup_arch(char **cmdline_p)
{
        unsigned long bootmap_size;
        unsigned long start_pfn, max_pfn, max_low_pfn;

#ifdef CONFIG_EARLY_PRINTK
        extern void enable_early_printk(void);

        enable_early_printk();
#endif
#ifdef CONFIG_CMDLINE_BOOL
        strcpy(COMMAND_LINE, CONFIG_CMDLINE);
#endif

        ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);

#ifdef CONFIG_BLK_DEV_RAM
        rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
        rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
        rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
#endif

        if (!MOUNT_ROOT_RDONLY)
                root_mountflags &= ~MS_RDONLY;
        init_mm.start_code = (unsigned long) _text;
        init_mm.end_code = (unsigned long) _etext;
        init_mm.end_data = (unsigned long) _edata;
        init_mm.brk = (unsigned long) _end;

        code_resource.start = virt_to_bus(_text);
        code_resource.end = virt_to_bus(_etext)-1;
        data_resource.start = virt_to_bus(_etext);
        data_resource.end = virt_to_bus(_edata)-1;

        sh_mv_setup(cmdline_p);

#define PFN_UP(x)       (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
#define PFN_DOWN(x)     ((x) >> PAGE_SHIFT)
#define PFN_PHYS(x)     ((x) << PAGE_SHIFT)

#ifdef CONFIG_DISCONTIGMEM
        NODE_DATA(0)->bdata = &discontig_node_bdata[0];
        NODE_DATA(1)->bdata = &discontig_node_bdata[1];

        bootmap_size = init_bootmem_node(NODE_DATA(1), 
                                         PFN_UP(__MEMORY_START_2ND),
                                         PFN_UP(__MEMORY_START_2ND),
                                         PFN_DOWN(__MEMORY_START_2ND+__MEMORY_SIZE_2ND));
        free_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, __MEMORY_SIZE_2ND);
        reserve_bootmem_node(NODE_DATA(1), __MEMORY_START_2ND, bootmap_size);
#endif

        /*
         * Find the highest page frame number we have available
         */
        max_pfn = PFN_DOWN(__pa(memory_end));

        /*
         * Determine low and high memory ranges:
         */
        max_low_pfn = max_pfn;

        /*
         * Partially used pages are not usable - thus
         * we are rounding upwards:
         */
        start_pfn = PFN_UP(__pa(_end));

        /*
         * Find a proper area for the bootmem bitmap. After this
         * bootstrap step all allocations (until the page allocator
         * is intact) must be done via bootmem_alloc().
         */
        bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
                                         __MEMORY_START>>PAGE_SHIFT,
                                         max_low_pfn);
        /*
         * Register fully available low RAM pages with the bootmem allocator.
         */
        {
                unsigned long curr_pfn, last_pfn, pages;

                /*
                 * We are rounding up the start address of usable memory:
                 */
                curr_pfn = PFN_UP(__MEMORY_START);
                /*
                 * ... and at the end of the usable range downwards:
                 */
                last_pfn = PFN_DOWN(__pa(memory_end));

                if (last_pfn > max_low_pfn)
                        last_pfn = max_low_pfn;

                pages = last_pfn - curr_pfn;
                free_bootmem_node(NODE_DATA(0), PFN_PHYS(curr_pfn),
                                  PFN_PHYS(pages));
        }

        /*
         * Reserve the kernel text and
         * Reserve the bootmem bitmap. We do this in two steps (first step
         * was init_bootmem()), because this catches the (definitely buggy)
         * case of us accidentally initializing the bootmem allocator with
         * an invalid RAM area.
         */
        reserve_bootmem_node(NODE_DATA(0), __MEMORY_START+PAGE_SIZE,
                (PFN_PHYS(start_pfn)+bootmap_size+PAGE_SIZE-1)-__MEMORY_START);

        /*
         * reserve physical page 0 - it's a special BIOS page on many boxes,
         * enabling clean reboots, SMP operation, laptop functions.
         */
        reserve_bootmem_node(NODE_DATA(0), __MEMORY_START, PAGE_SIZE);

#ifdef CONFIG_BLK_DEV_INITRD
        ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0);
        if (&__rd_start != &__rd_end) {
                LOADER_TYPE = 1;
                INITRD_START = PHYSADDR((unsigned long)&__rd_start) - __MEMORY_START;
                INITRD_SIZE = (unsigned long)&__rd_end - (unsigned long)&__rd_start;
        }

        if (LOADER_TYPE && INITRD_START) {
                if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
                        reserve_bootmem_node(NODE_DATA(0), INITRD_START+__MEMORY_START, INITRD_SIZE);
                        initrd_start =
                                INITRD_START ? INITRD_START + PAGE_OFFSET + __MEMORY_START : 0;
                        initrd_end = initrd_start + INITRD_SIZE;
                } else {
                        printk("initrd extends beyond end of memory "
                            "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
                                    INITRD_START + INITRD_SIZE,
                                    max_low_pfn << PAGE_SHIFT);
                        initrd_start = 0;
                }
        }
#endif

#ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
#endif

        /* Perform the machine specific initialisation */
        platform_setup();

        paging_init();
}

struct sh_machine_vector* __init get_mv_byname(const char* name)
{
        extern int strcasecmp(const char *, const char *);
        extern long __machvec_start, __machvec_end;
        struct sh_machine_vector *all_vecs =
                (struct sh_machine_vector *)&__machvec_start;

        int i, n = ((unsigned long)&__machvec_end
                    - (unsigned long)&__machvec_start)/
                sizeof(struct sh_machine_vector);

        for (i = 0; i < n; ++i) {
                struct sh_machine_vector *mv = &all_vecs[i];
                if (mv == NULL)
                        continue;
                if (strcasecmp(name, get_system_type()) == 0) {
                        return mv;
                }
        }
        return NULL;
}

static struct cpu cpu[NR_CPUS];

static int __init topology_init(void)
{
        int cpu_id;

        for (cpu_id = 0; cpu_id < NR_CPUS; cpu_id++)
                if (cpu_possible(cpu_id))
                        register_cpu(&cpu[cpu_id], cpu_id, NULL);

        return 0;
}

subsys_initcall(topology_init);

static const char *cpu_name[] = {
        [CPU_SH7604]    = "SH7604",
        [CPU_SH7705]    = "SH7705",
        [CPU_SH7708]    = "SH7708",
        [CPU_SH7729]    = "SH7729",
        [CPU_SH7300]    = "SH7300",
        [CPU_SH7750]    = "SH7750",
        [CPU_SH7750S]   = "SH7750S",
        [CPU_SH7750R]   = "SH7750R",
        [CPU_SH7751]    = "SH7751",
        [CPU_SH7751R]   = "SH7751R",
        [CPU_SH7760]    = "SH7760",
        [CPU_SH73180]   = "SH73180",
        [CPU_ST40RA]    = "ST40RA",
        [CPU_ST40GX1]   = "ST40GX1",
        [CPU_SH4_202]   = "SH4-202",
        [CPU_SH4_501]   = "SH4-501",
        [CPU_SH_NONE]   = "Unknown"
};

const char *get_cpu_subtype(void)
{
        return cpu_name[boot_cpu_data.type];
}

#ifdef CONFIG_PROC_FS
static const char *cpu_flags[] = {
        "none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
};

static void show_cpuflags(struct seq_file *m)
{
        unsigned long i;

        seq_printf(m, "cpu flags\t:");

        if (!cpu_data->flags) {
                seq_printf(m, " %s\n", cpu_flags[0]);
                return;
        }

        for (i = 0; i < cpu_data->flags; i++)
                if ((cpu_data->flags & (1 << i)))
                        seq_printf(m, " %s", cpu_flags[i+1]);

        seq_printf(m, "\n");
}

static void show_cacheinfo(struct seq_file *m, const char *type, struct cache_info info)
{
        unsigned int cache_size;

        cache_size = info.ways * info.sets * info.linesz;

        seq_printf(m, "%s size\t: %dKiB\n", type, cache_size >> 10);
}

/*
 *      Get CPU information for use by the procfs.
 */
static int show_cpuinfo(struct seq_file *m, void *v)
{
        unsigned int cpu = smp_processor_id();

        if (!cpu && cpu_online(cpu))
                seq_printf(m, "machine\t\t: %s\n", get_system_type());

        seq_printf(m, "processor\t: %d\n", cpu);
        seq_printf(m, "cpu family\t: %s\n", system_utsname.machine);
        seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype());

        show_cpuflags(m);

        seq_printf(m, "cache type\t: ");

        /*
         * Check for what type of cache we have, we support both the
         * unified cache on the SH-2 and SH-3, as well as the harvard
         * style cache on the SH-4.
         */
        if (test_bit(SH_CACHE_COMBINED, &(boot_cpu_data.icache.flags))) {
                seq_printf(m, "unified\n");
                show_cacheinfo(m, "cache", boot_cpu_data.icache);
        } else {
                seq_printf(m, "split (harvard)\n");
                show_cacheinfo(m, "icache", boot_cpu_data.icache);
                show_cacheinfo(m, "dcache", boot_cpu_data.dcache);
        }

        seq_printf(m, "bogomips\t: %lu.%02lu\n",
                     boot_cpu_data.loops_per_jiffy/(500000/HZ),
                     (boot_cpu_data.loops_per_jiffy/(5000/HZ)) % 100);

#define PRINT_CLOCK(name, value) \
        seq_printf(m, name " clock\t: %d.%02dMHz\n", \
                     ((value) / 1000000), ((value) % 1000000)/10000)
        
        PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock);
        PRINT_CLOCK("bus", boot_cpu_data.bus_clock);
#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
        PRINT_CLOCK("memory", boot_cpu_data.memory_clock);
#endif
        PRINT_CLOCK("module", boot_cpu_data.module_clock);

        return 0;
}


static void *c_start(struct seq_file *m, loff_t *pos)
{
        return *pos < NR_CPUS ? cpu_data + *pos : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
        ++*pos;
        return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
struct seq_operations cpuinfo_op = {
        .start  = c_start,
        .next   = c_next,
        .stop   = c_stop,
        .show   = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */

#ifdef CONFIG_SH_KGDB
/*
 * Parse command-line kgdb options.  By default KGDB is enabled,
 * entered on error (or other action) using default serial info.
 * The command-line option can include a serial port specification
 * and an action to override default or configured behavior.
 */
struct kgdb_sermap kgdb_sci_sermap =
{ "ttySC", 5, kgdb_sci_setup, NULL };

struct kgdb_sermap *kgdb_serlist = &kgdb_sci_sermap;
struct kgdb_sermap *kgdb_porttype = &kgdb_sci_sermap;

void kgdb_register_sermap(struct kgdb_sermap *map)
{
        struct kgdb_sermap *last;

        for (last = kgdb_serlist; last->next; last = last->next)
                ;
        last->next = map;
        if (!map->namelen) {
                map->namelen = strlen(map->name);
        }
}

static int __init kgdb_parse_options(char *options)
{
        char c;
        int baud;

        /* Check for port spec (or use default) */

        /* Determine port type and instance */
        if (!memcmp(options, "tty", 3)) {
                struct kgdb_sermap *map = kgdb_serlist;

                while (map && memcmp(options, map->name, map->namelen))
                        map = map->next;

                if (!map) {
                        KGDB_PRINTK("unknown port spec in %s\n", options);
                        return -1;
                }

                kgdb_porttype = map;
                kgdb_serial_setup = map->setup_fn;
                kgdb_portnum = options[map->namelen] - '0';
                options += map->namelen + 1;

                options = (*options == ',') ? options+1 : options;
                
                /* Read optional parameters (baud/parity/bits) */
                baud = simple_strtoul(options, &options, 10);
                if (baud != 0) {
                        kgdb_baud = baud;

                        c = toupper(*options);
                        if (c == 'E' || c == 'O' || c == 'N') {
                                kgdb_parity = c;
                                options++;
                        }

                        c = *options;
                        if (c == '7' || c == '8') {
                                kgdb_bits = c;
                                options++;
                        }
                        options = (*options == ',') ? options+1 : options;
                }
        }

        /* Check for action specification */
        if (!memcmp(options, "halt", 4)) {
                kgdb_halt = 1;
                options += 4;
        } else if (!memcmp(options, "disabled", 8)) {
                kgdb_enabled = 0;
                options += 8;
        }

        if (*options) {
                KGDB_PRINTK("ignored unknown options: %s\n", options);
                return 0;
        }
        return 1;
}
__setup("kgdb=", kgdb_parse_options);
#endif /* CONFIG_SH_KGDB */